diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 852 |
1 files changed, 852 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi new file mode 100644 index 0000000000..122c7128de --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -0,0 +1,852 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +#include "sdm845.dtsi" +#include "sdm845-wcd9340.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &rmtfs_mem; + +/ { + aliases { + serial0 = &uart9; + serial1 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + label = "Hall effect sensor"; + + pinctrl-0 = <&hall_sensor_default>; + pinctrl-names = "default"; + + event-hall-sensor { + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + label = "Hall Effect Sensor"; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Volume keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_down_gpio &volume_up_gpio>; + + key-vol-down { + label = "Volume down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + + key-vol-up { + label = "Volume up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + /* + * The rmtfs_mem needs to be guarded due to "XPU limitations" + * it is otherwise possible for an allocation adjacent to the + * rmtfs_mem region to trigger an XPU violation, causing a crash. + */ + rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 { + no-map; + reg = <0 0xf5b00000 0 0x1000>; + }; + /* + * The rmtfs memory region in downstream is 'dynamically allocated' + * but given the same address every time. Hard code it as this address is + * where the modem firmware expects it to be. + */ + rmtfs_mem: rmtfs-mem@f5b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf5b01000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 { + no-map; + reg = <0 0xf5d01000 0 0x1000>; + }; + + /* + * It seems like reserving the old rmtfs_mem region is also needed to prevent + * random crashes which are most likely modem related, more testing needed. + */ + removed_region: removed-region@88f00000 { + no-map; + reg = <0 0x88f00000 0 0x1c00000>; + }; + + ramoops: ramoops@ac300000 { + compatible = "ramoops"; + reg = <0 0xac300000 0 0x400000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x200000>; + ecc-size = <16>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + /* + * The touchscreen regulator seems to be controlled somehow by a gpio. + * Model it as a fixed regulator and keep it on. Without schematics we + * don't know how this is actually wired up... + */ + ts_1p8_supply: ts-1p8-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_1p8_supply"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 88 0>; + enable-active-high; + regulator-boot-on; + }; +}; + +&adsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/adsp.mbn"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdda_mipi_dsi0_pll: + vdda_qlink_lv: + vdda_ufs1_core: + vdda_usb1_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_1p8: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_mipi_dsi0_1p2: + vdda_ufs1_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + regulators-2 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <100000>; + + bq27441_fg: bq27441-battery@55 { + compatible = "ti,bq27411"; + status = "okay"; + reg = <0x55>; + }; +}; + +&i2c12 { + status = "okay"; + clock-frequency = <400000>; + + synaptics-rmi4-i2c@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_default_pins>; + + vdd-supply = <&vreg_l28a_3p0>; + vio-supply = <&ts_1p8_supply>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4_f12: rmi4-f12@12 { + reg = <0x12>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <144>; + syna,sensor-type = <1>; + syna,rezero-wait-ms = <200>; + }; + }; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn"; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + /* + * Both devices use different panels but all other properties + * are common. Compatible line is declared in device dts. + */ + display_panel: panel@0 { + status = "disabled"; + + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +/* Modem/wifi */ +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; +}; + +&pm8998_gpios { + volume_down_gpio: pm8998-gpio5-state { + pinconf { + pins = "gpio5"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; + + volume_up_gpio: pm8998-gpio6-state { + pinconf { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; +}; + +&pmi8998_charger { + status = "okay"; +}; + +&q6afedai { + qi2s@22 { + reg = <22>; + qcom,sd-lines = <1>; + }; + + qi2s@23 { + reg = <23>; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; + + dai@3 { + reg = <3>; + }; + + dai@4 { + reg = <4>; + }; + + dai@5 { + reg = <5>; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qup_i2c10_default { + drive-strength = <2>; + bias-disable; +}; + +&qup_i2c12_default { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; +}; + +&slpi_pas { + firmware-name = "qcom/sdm845/oneplus6/slpi.mbn"; + status = "okay"; +}; + +&sound { + compatible = "qcom,sdm845-sndcard"; + pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>; + pinctrl-names = "default"; + status = "okay"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + mm4-dai-link { + link-name = "MultiMedia4"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; + }; + + mm5-dai-link { + link-name = "MultiMedia5"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>; + }; + }; + + mm6-dai-link { + link-name = "MultiMedia6"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>; + }; + }; + + speaker_playback_dai: speaker-dai-link { + link-name = "Speaker Playback"; + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback 1"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture 1"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; + + slim2-dai-link { + link-name = "SLIM Playback 2"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 2>; /* AIF2_PB */ + }; + }; + + slimcap2-dai-link { + link-name = "SLIM Capture 2"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 3>; /* AIF2_CAP */ + }; + }; + + slimcap3-dai-link { + link-name = "SLIM Capture 3"; + cpu { + sound-dai = <&q6afedai SLIMBUS_2_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 5>; /* AIF3_CAP */ + }; + }; +}; + +&uart6 { + status = "okay"; + + pinctrl-0 = <&qup_uart6_4pin>; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + /* + * This path is relative to the qca/ + * subdir under lib/firmware. + */ + firmware-name = "oneplus6/crnv21.bin"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + label = "LS-UART1"; + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; + + /* + * disable USB3 clock requirement as the device only supports + * USB2. + */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + /* + * We don't have the capability to switch modes yet. + */ + dr_mode = "peripheral"; + + /* fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Remove USB3 phy as it's unused on this device. */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + hall_sensor_default: hall-sensor-default-state { + pins = "gpio124"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tri_state_key_default: tri-state-key-default-state { + pins = "gpio40", "gpio42", "gpio26"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_default_pins: ts-int-state { + pins = "gpio99", "gpio125"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + panel_reset_pins: panel-reset-state { + pins = "gpio6", "gpio25", "gpio26"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + panel_te_pin: panel-te-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + + panel_esd_pin: panel-esd-state { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + speaker_default: speaker-default-state { + pins = "gpio69"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + output-high; + }; +}; + +&venus { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/venus.mbn"; +}; + +&wcd9340 { + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; |