diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 18:50:36 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 18:50:36 +0000 |
commit | 50ba0232fd5312410f1b65247e774244f89a628e (patch) | |
tree | fd8f2fc78e9e548af0ff9590276602ee6125be00 /arch/arm64/boot/dts/qcom/sm8250.dtsi | |
parent | Releasing progress-linux version 6.7.12-1~progress7.99u1. (diff) | |
download | linux-50ba0232fd5312410f1b65247e774244f89a628e.tar.xz linux-50ba0232fd5312410f1b65247e774244f89a628e.zip |
Merging upstream version 6.8.9.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8250.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sm8250.dtsi | 123 |
1 files changed, 69 insertions, 54 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index d59a99ca87..b07a3bad6e 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -671,6 +671,7 @@ firmware { scm: scm { compatible = "qcom,scm-sm8250", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x13000>; #reset-cells = <1>; }; }; @@ -2123,7 +2124,7 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, @@ -2227,7 +2228,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -2328,7 +2329,7 @@ status = "disabled"; }; - pcie2: pci@1c10000 { + pcie2: pcie@1c10000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c10000 0 0x3000>, <0 0x64000000 0 0xf1d>, @@ -2434,7 +2435,7 @@ "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -2463,29 +2464,48 @@ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - freq-table-hz = - <37500000 300000000>, - <0 0>, - <0 0>, - <37500000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; + + operating-points-v2 = <&ufs_opp_table>; interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>; interconnect-names = "ufs-ddr", "cpu-ufs"; status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-37500000 { + opp-hz = /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8250-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&rpmhcc RPMH_CXO_CLK>, @@ -2493,16 +2513,10 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x16c>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x16c>, - <0 0x01d87a00 0 0x200>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; cryptobam: dma-controller@1dc4000 { @@ -2543,6 +2557,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sm8250-tcsr", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x30000>; + }; + wsamacro: codec@3240000 { compatible = "qcom,sm8250-lpass-wsa-macro"; reg = <0 0x03240000 0 0x1000>; @@ -2565,7 +2584,7 @@ status = "disabled"; }; - swr0: soundwire-controller@3250000 { + swr0: soundwire@3250000 { reg = <0 0x03250000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; @@ -2631,7 +2650,7 @@ #sound-dai-cells = <1>; }; - swr1: soundwire-controller@3210000 { + swr1: soundwire@3210000 { reg = <0 0x03210000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; status = "disabled"; @@ -2678,7 +2697,7 @@ }; /* tx macro */ - swr2: soundwire-controller@3230000 { + swr2: soundwire@3230000 { reg = <0 0x03230000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; @@ -3006,7 +3025,7 @@ compatible = "qcom,sm8250-slpi-pas"; reg = <0 0x05c00000 0 0x4000>; - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3710,7 +3729,7 @@ compatible = "qcom,sm8250-cdsp-pas"; reg = <0 0x08300000 0 0x10000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3873,32 +3892,26 @@ usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sm8250-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x200>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088eb000 0 0x1000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", + "phy_phy"; - usb_2_ssphy: phy@88eb200 { - reg = <0 0x088eb200 0 0x200>, - <0 0x088eb400 0 0x200>, - <0 0x088eb800 0 0x800>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + status = "disabled"; }; sdhc_2: mmc@8804000 { @@ -4125,6 +4138,7 @@ "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; + wakeup-source; resets = <&gcc GCC_USB30_PRIM_BCR>; @@ -4193,6 +4207,7 @@ "dp_hs_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; + wakeup-source; resets = <&gcc GCC_USB30_SEC_BCR>; @@ -4207,7 +4222,7 @@ iommus = <&apps_smmu 0x20 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -5872,7 +5887,7 @@ compatible = "qcom,sm8250-adsp-pas"; reg = <0 0x17300000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, |