Adding upstream version 6.7.7.upstream/6.7.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 16 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 677ff8de4b..19f57ead4e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -28,6 +28,7 @@
 	};
 
 	memory@80000000 {
+		bootph-pre-ram;
 		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -130,6 +131,7 @@
 &main_pmx0 {
 	/* First pad number is ALW package and second is AMC package */
 	main_uart0_pins_default: main-uart0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
 			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
@@ -137,6 +139,7 @@
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
+		bootph-pre-ram;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */
 			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */
@@ -167,6 +170,7 @@
 	};
 
 	main_mmc0_pins_default: main-mmc0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
 			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
@@ -182,6 +186,7 @@
 	};
 
 	main_mmc1_pins_default: main-mmc1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
 			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
@@ -207,6 +212,7 @@
 	};
 
 	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */
 			AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */
@@ -274,6 +280,7 @@
 
 &mcu_pmx0 {
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		bootph-pre-ram;
 		pinctrl-single,pins = <
 			AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */
 			AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */
@@ -285,12 +292,14 @@
 
 &wkup_uart0 {
 	/* WKUP UART0 is used by DM firmware */
+	bootph-pre-ram;
 	status = "reserved";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_uart0_pins_default>;
 };
 
 &main_uart0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -298,6 +307,7 @@
 
 &main_uart1 {
 	/* Main UART1 is used by TIFS firmware */
+	bootph-pre-ram;
 	status = "reserved";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
@@ -390,6 +400,7 @@
 };
 
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
@@ -399,6 +410,7 @@
 
 &sdhci1 {
 	/* SD/MMC */
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
@@ -407,21 +419,25 @@
 };
 
 &cpsw3g {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>;
 };
 
 &cpsw_port1 {
+	bootph-all;
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
 };
 
 &cpsw3g_mdio {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mdio1_pins_default>;
 
 	cpsw3g_phy0: ethernet-phy@0 {
+		bootph-all;
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;