Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

14 files changed, 5632 insertions, 0 deletions

diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
new file mode 100644
index 0000000000..a0e94388dc
--- /dev/null
+++ b/arch/mips/alchemy/common/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+#  Copyright 2000, 2008 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
+#
+# Makefile for the Alchemy Au1xx0 CPUs, generic files.
+#
+
+obj-y += prom.o time.o clock.o platform.o power.o gpiolib.o \
+	 setup.o sleeper.o dma.o dbdma.o vss.o irq.o usb.o
diff --git a/arch/mips/alchemy/common/clock.c b/arch/mips/alchemy/common/clock.c
new file mode 100644
index 0000000000..c01be8c452
--- /dev/null
+++ b/arch/mips/alchemy/common/clock.c
@@ -0,0 +1,1116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Alchemy clocks.
+ *
+ * Exposes all configurable internal clock sources to the clk framework.
+ *
+ * We have:
+ *  - Root source, usually 12MHz supplied by an external crystal
+ *  - 3 PLLs which generate multiples of root rate [AUX, CPU, AUX2]
+ *
+ * Dividers:
+ *  - 6 clock dividers with:
+ *   * selectable source [one of the PLLs],
+ *   * output divided between [2 .. 512 in steps of 2] (!Au1300)
+ *     or [1 .. 256 in steps of 1] (Au1300),
+ *   * can be enabled individually.
+ *
+ * - up to 6 "internal" (fixed) consumers which:
+ *   * take either AUXPLL or one of the above 6 dividers as input,
+ *   * divide this input by 1, 2, or 4 (and 3 on Au1300).
+ *   * can be disabled separately.
+ *
+ * Misc clocks:
+ * - sysbus clock: CPU core clock (CPUPLL) divided by 2, 3 or 4.
+ *    depends on board design and should be set by bootloader, read-only.
+ * - peripheral clock: half the rate of sysbus clock, source for a lot
+ *    of peripheral blocks, read-only.
+ * - memory clock: clk rate to main memory chips, depends on board
+ *    design and is read-only,
+ * - lrclk: the static bus clock signal for synchronous operation.
+ *    depends on board design, must be set by bootloader,
+ *    but may be required to correctly configure devices attached to
+ *    the static bus. The Au1000/1500/1100 manuals call it LCLK, on
+ *    later models it's called RCLK.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* Base clock: 12MHz is the default in all databooks, and I haven't
+ * found any board yet which uses a different rate.
+ */
+#define ALCHEMY_ROOTCLK_RATE	12000000
+
+/*
+ * the internal sources which can be driven by the PLLs and dividers.
+ * Names taken from the databooks, refer to them for more information,
+ * especially which ones are share a clock line.
+ */
+static const char * const alchemy_au1300_intclknames[] = {
+	"lcd_intclk", "gpemgp_clk", "maempe_clk", "maebsa_clk",
+	"EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1200_intclknames[] = {
+	"lcd_intclk", NULL, NULL, NULL, "EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1550_intclknames[] = {
+	"usb_clk", "psc0_intclk", "psc1_intclk", "pci_clko",
+	"EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1100_intclknames[] = {
+	"usb_clk", "lcd_intclk", NULL, "i2s_clk", "EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1500_intclknames[] = {
+	NULL, "usbd_clk", "usbh_clk", "pci_clko", "EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1000_intclknames[] = {
+	"irda_clk", "usbd_clk", "usbh_clk", "i2s_clk", "EXTCLK0",
+	"EXTCLK1"
+};
+
+/* aliases for a few on-chip sources which are either shared
+ * or have gone through name changes.
+ */
+static struct clk_aliastable {
+	char *alias;
+	char *base;
+	int cputype;
+} alchemy_clk_aliases[] __initdata = {
+	{ "usbh_clk", "usb_clk",    ALCHEMY_CPU_AU1100 },
+	{ "usbd_clk", "usb_clk",    ALCHEMY_CPU_AU1100 },
+	{ "irda_clk", "usb_clk",    ALCHEMY_CPU_AU1100 },
+	{ "usbh_clk", "usb_clk",    ALCHEMY_CPU_AU1550 },
+	{ "usbd_clk", "usb_clk",    ALCHEMY_CPU_AU1550 },
+	{ "psc2_intclk", "usb_clk", ALCHEMY_CPU_AU1550 },
+	{ "psc3_intclk", "EXTCLK0", ALCHEMY_CPU_AU1550 },
+	{ "psc0_intclk", "EXTCLK0", ALCHEMY_CPU_AU1200 },
+	{ "psc1_intclk", "EXTCLK1", ALCHEMY_CPU_AU1200 },
+	{ "psc0_intclk", "EXTCLK0", ALCHEMY_CPU_AU1300 },
+	{ "psc2_intclk", "EXTCLK0", ALCHEMY_CPU_AU1300 },
+	{ "psc1_intclk", "EXTCLK1", ALCHEMY_CPU_AU1300 },
+	{ "psc3_intclk", "EXTCLK1", ALCHEMY_CPU_AU1300 },
+
+	{ NULL, NULL, 0 },
+};
+
+#define IOMEM(x)	((void __iomem *)(KSEG1ADDR(CPHYSADDR(x))))
+
+/* access locks to SYS_FREQCTRL0/1 and SYS_CLKSRC registers */
+static spinlock_t alchemy_clk_fg0_lock;
+static spinlock_t alchemy_clk_fg1_lock;
+static DEFINE_SPINLOCK(alchemy_clk_csrc_lock);
+
+/* CPU Core clock *****************************************************/
+
+static unsigned long alchemy_clk_cpu_recalc(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	unsigned long t;
+
+	/*
+	 * On early Au1000, sys_cpupll was write-only. Since these
+	 * silicon versions of Au1000 are not sold, we don't bend
+	 * over backwards trying to determine the frequency.
+	 */
+	if (unlikely(au1xxx_cpu_has_pll_wo()))
+		t = 396000000;
+	else {
+		t = alchemy_rdsys(AU1000_SYS_CPUPLL) & 0x7f;
+		if (alchemy_get_cputype() < ALCHEMY_CPU_AU1300)
+			t &= 0x3f;
+		t *= parent_rate;
+	}
+
+	return t;
+}
+
+void __init alchemy_set_lpj(void)
+{
+	preset_lpj = alchemy_clk_cpu_recalc(NULL, ALCHEMY_ROOTCLK_RATE);
+	preset_lpj /= 2 * HZ;
+}
+
+static const struct clk_ops alchemy_clkops_cpu = {
+	.recalc_rate	= alchemy_clk_cpu_recalc,
+};
+
+static struct clk __init *alchemy_clk_setup_cpu(const char *parent_name,
+						int ctype)
+{
+	struct clk_init_data id;
+	struct clk_hw *h;
+	struct clk *clk;
+
+	h = kzalloc(sizeof(*h), GFP_KERNEL);
+	if (!h)
+		return ERR_PTR(-ENOMEM);
+
+	id.name = ALCHEMY_CPU_CLK;
+	id.parent_names = &parent_name;
+	id.num_parents = 1;
+	id.flags = 0;
+	id.ops = &alchemy_clkops_cpu;
+	h->init = &id;
+
+	clk = clk_register(NULL, h);
+	if (IS_ERR(clk)) {
+		pr_err("failed to register clock\n");
+		kfree(h);
+	}
+
+	return clk;
+}
+
+/* AUXPLLs ************************************************************/
+
+struct alchemy_auxpll_clk {
+	struct clk_hw hw;
+	unsigned long reg;	/* au1300 has also AUXPLL2 */
+	int maxmult;		/* max multiplier */
+};
+#define to_auxpll_clk(x) container_of(x, struct alchemy_auxpll_clk, hw)
+
+static unsigned long alchemy_clk_aux_recalc(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct alchemy_auxpll_clk *a = to_auxpll_clk(hw);
+
+	return (alchemy_rdsys(a->reg) & 0xff) * parent_rate;
+}
+
+static int alchemy_clk_aux_setr(struct clk_hw *hw,
+				unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct alchemy_auxpll_clk *a = to_auxpll_clk(hw);
+	unsigned long d = rate;
+
+	if (rate)
+		d /= parent_rate;
+	else
+		d = 0;
+
+	/* minimum is 84MHz, max is 756-1032 depending on variant */
+	if (((d < 7) && (d != 0)) || (d > a->maxmult))
+		return -EINVAL;
+
+	alchemy_wrsys(d, a->reg);
+	return 0;
+}
+
+static long alchemy_clk_aux_roundr(struct clk_hw *hw,
+					    unsigned long rate,
+					    unsigned long *parent_rate)
+{
+	struct alchemy_auxpll_clk *a = to_auxpll_clk(hw);
+	unsigned long mult;
+
+	if (!rate || !*parent_rate)
+		return 0;
+
+	mult = rate / (*parent_rate);
+
+	if (mult && (mult < 7))
+		mult = 7;
+	if (mult > a->maxmult)
+		mult = a->maxmult;
+
+	return (*parent_rate) * mult;
+}
+
+static const struct clk_ops alchemy_clkops_aux = {
+	.recalc_rate	= alchemy_clk_aux_recalc,
+	.set_rate	= alchemy_clk_aux_setr,
+	.round_rate	= alchemy_clk_aux_roundr,
+};
+
+static struct clk __init *alchemy_clk_setup_aux(const char *parent_name,
+						char *name, int maxmult,
+						unsigned long reg)
+{
+	struct clk_init_data id;
+	struct clk *c;
+	struct alchemy_auxpll_clk *a;
+
+	a = kzalloc(sizeof(*a), GFP_KERNEL);
+	if (!a)
+		return ERR_PTR(-ENOMEM);
+
+	id.name = name;
+	id.parent_names = &parent_name;
+	id.num_parents = 1;
+	id.flags = CLK_GET_RATE_NOCACHE;
+	id.ops = &alchemy_clkops_aux;
+
+	a->reg = reg;
+	a->maxmult = maxmult;
+	a->hw.init = &id;
+
+	c = clk_register(NULL, &a->hw);
+	if (!IS_ERR(c))
+		clk_register_clkdev(c, name, NULL);
+	else
+		kfree(a);
+
+	return c;
+}
+
+/* sysbus_clk *********************************************************/
+
+static struct clk __init  *alchemy_clk_setup_sysbus(const char *pn)
+{
+	unsigned long v = (alchemy_rdsys(AU1000_SYS_POWERCTRL) & 3) + 2;
+	struct clk *c;
+
+	c = clk_register_fixed_factor(NULL, ALCHEMY_SYSBUS_CLK,
+				      pn, 0, 1, v);
+	if (!IS_ERR(c))
+		clk_register_clkdev(c, ALCHEMY_SYSBUS_CLK, NULL);
+	return c;
+}
+
+/* Peripheral Clock ***************************************************/
+
+static struct clk __init *alchemy_clk_setup_periph(const char *pn)
+{
+	/* Peripheral clock runs at half the rate of sysbus clk */
+	struct clk *c;
+
+	c = clk_register_fixed_factor(NULL, ALCHEMY_PERIPH_CLK,
+				      pn, 0, 1, 2);
+	if (!IS_ERR(c))
+		clk_register_clkdev(c, ALCHEMY_PERIPH_CLK, NULL);
+	return c;
+}
+
+/* mem clock **********************************************************/
+
+static struct clk __init *alchemy_clk_setup_mem(const char *pn, int ct)
+{
+	void __iomem *addr = IOMEM(AU1000_MEM_PHYS_ADDR);
+	unsigned long v;
+	struct clk *c;
+	int div;
+
+	switch (ct) {
+	case ALCHEMY_CPU_AU1550:
+	case ALCHEMY_CPU_AU1200:
+		v = __raw_readl(addr + AU1550_MEM_SDCONFIGB);
+		div = (v & (1 << 15)) ? 1 : 2;
+		break;
+	case ALCHEMY_CPU_AU1300:
+		v = __raw_readl(addr + AU1550_MEM_SDCONFIGB);
+		div = (v & (1 << 31)) ? 1 : 2;
+		break;
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+	default:
+		div = 2;
+		break;
+	}
+
+	c = clk_register_fixed_factor(NULL, ALCHEMY_MEM_CLK, pn,
+				      0, 1, div);
+	if (!IS_ERR(c))
+		clk_register_clkdev(c, ALCHEMY_MEM_CLK, NULL);
+	return c;
+}
+
+/* lrclk: external synchronous static bus clock ***********************/
+
+static struct clk __init *alchemy_clk_setup_lrclk(const char *pn, int t)
+{
+	/* Au1000, Au1500: MEM_STCFG0[11]: If bit is set, lrclk=pclk/5,
+	 * otherwise lrclk=pclk/4.
+	 * All other variants: MEM_STCFG0[15:13] = divisor.
+	 * L/RCLK = periph_clk / (divisor + 1)
+	 * On Au1000, Au1500, Au1100 it's called LCLK,
+	 * on later models it's called RCLK, but it's the same thing.
+	 */
+	struct clk *c;
+	unsigned long v = alchemy_rdsmem(AU1000_MEM_STCFG0);
+
+	switch (t) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+		v = 4 + ((v >> 11) & 1);
+		break;
+	default:	/* all other models */
+		v = ((v >> 13) & 7) + 1;
+	}
+	c = clk_register_fixed_factor(NULL, ALCHEMY_LR_CLK,
+				      pn, 0, 1, v);
+	if (!IS_ERR(c))
+		clk_register_clkdev(c, ALCHEMY_LR_CLK, NULL);
+	return c;
+}
+
+/* Clock dividers and muxes *******************************************/
+
+/* data for fgen and csrc mux-dividers */
+struct alchemy_fgcs_clk {
+	struct clk_hw hw;
+	spinlock_t *reglock;	/* register lock		  */
+	unsigned long reg;	/* SYS_FREQCTRL0/1		  */
+	int shift;		/* offset in register		  */
+	int parent;		/* parent before disable [Au1300] */
+	int isen;		/* is it enabled?		  */
+	int *dt;		/* dividertable for csrc	  */
+};
+#define to_fgcs_clk(x) container_of(x, struct alchemy_fgcs_clk, hw)
+
+static long alchemy_calc_div(unsigned long rate, unsigned long prate,
+			       int scale, int maxdiv, unsigned long *rv)
+{
+	long div1, div2;
+
+	div1 = prate / rate;
+	if ((prate / div1) > rate)
+		div1++;
+
+	if (scale == 2) {	/* only div-by-multiple-of-2 possible */
+		if (div1 & 1)
+			div1++;	/* stay <=prate */
+	}
+
+	div2 = (div1 / scale) - 1;	/* value to write to register */
+
+	if (div2 > maxdiv)
+		div2 = maxdiv;
+	if (rv)
+		*rv = div2;
+
+	div1 = ((div2 + 1) * scale);
+	return div1;
+}
+
+static int alchemy_clk_fgcs_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req,
+				 int scale, int maxdiv)
+{
+	struct clk_hw *pc, *bpc, *free;
+	long tdv, tpr, pr, nr, br, bpr, diff, lastdiff;
+	int j;
+
+	lastdiff = INT_MAX;
+	bpr = 0;
+	bpc = NULL;
+	br = -EINVAL;
+	free = NULL;
+
+	/* look at the rates each enabled parent supplies and select
+	 * the one that gets closest to but not over the requested rate.
+	 */
+	for (j = 0; j < 7; j++) {
+		pc = clk_hw_get_parent_by_index(hw, j);
+		if (!pc)
+			break;
+
+		/* if this parent is currently unused, remember it.
+		 * XXX: we would actually want clk_has_active_children()
+		 * but this is a good-enough approximation for now.
+		 */
+		if (!clk_hw_is_prepared(pc)) {
+			if (!free)
+				free = pc;
+		}
+
+		pr = clk_hw_get_rate(pc);
+		if (pr < req->rate)
+			continue;
+
+		/* what can hardware actually provide */
+		tdv = alchemy_calc_div(req->rate, pr, scale, maxdiv, NULL);
+		nr = pr / tdv;
+		diff = req->rate - nr;
+		if (nr > req->rate)
+			continue;
+
+		if (diff < lastdiff) {
+			lastdiff = diff;
+			bpr = pr;
+			bpc = pc;
+			br = nr;
+		}
+		if (diff == 0)
+			break;
+	}
+
+	/* if we couldn't get the exact rate we wanted from the enabled
+	 * parents, maybe we can tell an available disabled/inactive one
+	 * to give us a rate we can divide down to the requested rate.
+	 */
+	if (lastdiff && free) {
+		for (j = (maxdiv == 4) ? 1 : scale; j <= maxdiv; j += scale) {
+			tpr = req->rate * j;
+			if (tpr < 0)
+				break;
+			pr = clk_hw_round_rate(free, tpr);
+
+			tdv = alchemy_calc_div(req->rate, pr, scale, maxdiv,
+					       NULL);
+			nr = pr / tdv;
+			diff = req->rate - nr;
+			if (nr > req->rate)
+				continue;
+			if (diff < lastdiff) {
+				lastdiff = diff;
+				bpr = pr;
+				bpc = free;
+				br = nr;
+			}
+			if (diff == 0)
+				break;
+		}
+	}
+
+	if (br < 0)
+		return br;
+
+	req->best_parent_rate = bpr;
+	req->best_parent_hw = bpc;
+	req->rate = br;
+
+	return 0;
+}
+
+static int alchemy_clk_fgv1_en(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v, flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v |= (1 << 1) << c->shift;
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static int alchemy_clk_fgv1_isen(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v = alchemy_rdsys(c->reg) >> (c->shift + 1);
+
+	return v & 1;
+}
+
+static void alchemy_clk_fgv1_dis(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v, flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~((1 << 1) << c->shift);
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+}
+
+static int alchemy_clk_fgv1_setp(struct clk_hw *hw, u8 index)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v, flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	if (index)
+		v |= (1 << c->shift);
+	else
+		v &= ~(1 << c->shift);
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static u8 alchemy_clk_fgv1_getp(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+
+	return (alchemy_rdsys(c->reg) >> c->shift) & 1;
+}
+
+static int alchemy_clk_fgv1_setr(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long div, v, flags, ret;
+	int sh = c->shift + 2;
+
+	if (!rate || !parent_rate || rate > (parent_rate / 2))
+		return -EINVAL;
+	ret = alchemy_calc_div(rate, parent_rate, 2, 512, &div);
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~(0xff << sh);
+	v |= div << sh;
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static unsigned long alchemy_clk_fgv1_recalc(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v = alchemy_rdsys(c->reg) >> (c->shift + 2);
+
+	v = ((v & 0xff) + 1) * 2;
+	return parent_rate / v;
+}
+
+static int alchemy_clk_fgv1_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req)
+{
+	return alchemy_clk_fgcs_detr(hw, req, 2, 512);
+}
+
+/* Au1000, Au1100, Au15x0, Au12x0 */
+static const struct clk_ops alchemy_clkops_fgenv1 = {
+	.recalc_rate	= alchemy_clk_fgv1_recalc,
+	.determine_rate	= alchemy_clk_fgv1_detr,
+	.set_rate	= alchemy_clk_fgv1_setr,
+	.set_parent	= alchemy_clk_fgv1_setp,
+	.get_parent	= alchemy_clk_fgv1_getp,
+	.enable		= alchemy_clk_fgv1_en,
+	.disable	= alchemy_clk_fgv1_dis,
+	.is_enabled	= alchemy_clk_fgv1_isen,
+};
+
+static void __alchemy_clk_fgv2_en(struct alchemy_fgcs_clk *c)
+{
+	unsigned long v = alchemy_rdsys(c->reg);
+
+	v &= ~(3 << c->shift);
+	v |= (c->parent & 3) << c->shift;
+	alchemy_wrsys(v, c->reg);
+	c->isen = 1;
+}
+
+static int alchemy_clk_fgv2_en(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long flags;
+
+	/* enable by setting the previous parent clock */
+	spin_lock_irqsave(c->reglock, flags);
+	__alchemy_clk_fgv2_en(c);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static int alchemy_clk_fgv2_isen(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+
+	return ((alchemy_rdsys(c->reg) >> c->shift) & 3) != 0;
+}
+
+static void alchemy_clk_fgv2_dis(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v, flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~(3 << c->shift);	/* set input mux to "disabled" state */
+	alchemy_wrsys(v, c->reg);
+	c->isen = 0;
+	spin_unlock_irqrestore(c->reglock, flags);
+}
+
+static int alchemy_clk_fgv2_setp(struct clk_hw *hw, u8 index)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	c->parent = index + 1;	/* value to write to register */
+	if (c->isen)
+		__alchemy_clk_fgv2_en(c);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static u8 alchemy_clk_fgv2_getp(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long flags, v;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = c->parent - 1;
+	spin_unlock_irqrestore(c->reglock, flags);
+	return v;
+}
+
+/* fg0-2 and fg4-6 share a "scale"-bit. With this bit cleared, the
+ * dividers behave exactly as on previous models (dividers are multiples
+ * of 2); with the bit set, dividers are multiples of 1, halving their
+ * range, but making them also much more flexible.
+ */
+static int alchemy_clk_fgv2_setr(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	int sh = c->shift + 2;
+	unsigned long div, v, flags, ret;
+
+	if (!rate || !parent_rate || rate > parent_rate)
+		return -EINVAL;
+
+	v = alchemy_rdsys(c->reg) & (1 << 30); /* test "scale" bit */
+	ret = alchemy_calc_div(rate, parent_rate, v ? 1 : 2,
+			       v ? 256 : 512, &div);
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~(0xff << sh);
+	v |= (div & 0xff) << sh;
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static unsigned long alchemy_clk_fgv2_recalc(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	int sh = c->shift + 2;
+	unsigned long v, t;
+
+	v = alchemy_rdsys(c->reg);
+	t = parent_rate / (((v >> sh) & 0xff) + 1);
+	if ((v & (1 << 30)) == 0)		/* test scale bit */
+		t /= 2;
+
+	return t;
+}
+
+static int alchemy_clk_fgv2_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	int scale, maxdiv;
+
+	if (alchemy_rdsys(c->reg) & (1 << 30)) {
+		scale = 1;
+		maxdiv = 256;
+	} else {
+		scale = 2;
+		maxdiv = 512;
+	}
+
+	return alchemy_clk_fgcs_detr(hw, req, scale, maxdiv);
+}
+
+/* Au1300 larger input mux, no separate disable bit, flexible divider */
+static const struct clk_ops alchemy_clkops_fgenv2 = {
+	.recalc_rate	= alchemy_clk_fgv2_recalc,
+	.determine_rate	= alchemy_clk_fgv2_detr,
+	.set_rate	= alchemy_clk_fgv2_setr,
+	.set_parent	= alchemy_clk_fgv2_setp,
+	.get_parent	= alchemy_clk_fgv2_getp,
+	.enable		= alchemy_clk_fgv2_en,
+	.disable	= alchemy_clk_fgv2_dis,
+	.is_enabled	= alchemy_clk_fgv2_isen,
+};
+
+static const char * const alchemy_clk_fgv1_parents[] = {
+	ALCHEMY_CPU_CLK, ALCHEMY_AUXPLL_CLK
+};
+
+static const char * const alchemy_clk_fgv2_parents[] = {
+	ALCHEMY_AUXPLL2_CLK, ALCHEMY_CPU_CLK, ALCHEMY_AUXPLL_CLK
+};
+
+static const char * const alchemy_clk_fgen_names[] = {
+	ALCHEMY_FG0_CLK, ALCHEMY_FG1_CLK, ALCHEMY_FG2_CLK,
+	ALCHEMY_FG3_CLK, ALCHEMY_FG4_CLK, ALCHEMY_FG5_CLK };
+
+static int __init alchemy_clk_init_fgens(int ctype)
+{
+	struct clk *c;
+	struct clk_init_data id;
+	struct alchemy_fgcs_clk *a;
+	unsigned long v;
+	int i, ret;
+
+	switch (ctype) {
+	case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
+		id.ops = &alchemy_clkops_fgenv1;
+		id.parent_names = alchemy_clk_fgv1_parents;
+		id.num_parents = 2;
+		break;
+	case ALCHEMY_CPU_AU1300:
+		id.ops = &alchemy_clkops_fgenv2;
+		id.parent_names = alchemy_clk_fgv2_parents;
+		id.num_parents = 3;
+		break;
+	default:
+		return -ENODEV;
+	}
+	id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE;
+
+	a = kzalloc((sizeof(*a)) * 6, GFP_KERNEL);
+	if (!a)
+		return -ENOMEM;
+
+	spin_lock_init(&alchemy_clk_fg0_lock);
+	spin_lock_init(&alchemy_clk_fg1_lock);
+	ret = 0;
+	for (i = 0; i < 6; i++) {
+		id.name = alchemy_clk_fgen_names[i];
+		a->shift = 10 * (i < 3 ? i : i - 3);
+		if (i > 2) {
+			a->reg = AU1000_SYS_FREQCTRL1;
+			a->reglock = &alchemy_clk_fg1_lock;
+		} else {
+			a->reg = AU1000_SYS_FREQCTRL0;
+			a->reglock = &alchemy_clk_fg0_lock;
+		}
+
+		/* default to first parent if bootloader has set
+		 * the mux to disabled state.
+		 */
+		if (ctype == ALCHEMY_CPU_AU1300) {
+			v = alchemy_rdsys(a->reg);
+			a->parent = (v >> a->shift) & 3;
+			if (!a->parent) {
+				a->parent = 1;
+				a->isen = 0;
+			} else
+				a->isen = 1;
+		}
+
+		a->hw.init = &id;
+		c = clk_register(NULL, &a->hw);
+		if (IS_ERR(c))
+			ret++;
+		else
+			clk_register_clkdev(c, id.name, NULL);
+		a++;
+	}
+
+	return ret;
+}
+
+/* internal sources muxes *********************************************/
+
+static int alchemy_clk_csrc_isen(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v = alchemy_rdsys(c->reg);
+
+	return (((v >> c->shift) >> 2) & 7) != 0;
+}
+
+static void __alchemy_clk_csrc_en(struct alchemy_fgcs_clk *c)
+{
+	unsigned long v = alchemy_rdsys(c->reg);
+
+	v &= ~((7 << 2) << c->shift);
+	v |= ((c->parent & 7) << 2) << c->shift;
+	alchemy_wrsys(v, c->reg);
+	c->isen = 1;
+}
+
+static int alchemy_clk_csrc_en(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long flags;
+
+	/* enable by setting the previous parent clock */
+	spin_lock_irqsave(c->reglock, flags);
+	__alchemy_clk_csrc_en(c);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static void alchemy_clk_csrc_dis(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v, flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~((3 << 2) << c->shift);	/* mux to "disabled" state */
+	alchemy_wrsys(v, c->reg);
+	c->isen = 0;
+	spin_unlock_irqrestore(c->reglock, flags);
+}
+
+static int alchemy_clk_csrc_setp(struct clk_hw *hw, u8 index)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	c->parent = index + 1;	/* value to write to register */
+	if (c->isen)
+		__alchemy_clk_csrc_en(c);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static u8 alchemy_clk_csrc_getp(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+
+	return c->parent - 1;
+}
+
+static unsigned long alchemy_clk_csrc_recalc(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v = (alchemy_rdsys(c->reg) >> c->shift) & 3;
+
+	return parent_rate / c->dt[v];
+}
+
+static int alchemy_clk_csrc_setr(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long d, v, flags;
+	int i;
+
+	if (!rate || !parent_rate || rate > parent_rate)
+		return -EINVAL;
+
+	d = (parent_rate + (rate / 2)) / rate;
+	if (d > 4)
+		return -EINVAL;
+	if ((d == 3) && (c->dt[2] != 3))
+		d = 4;
+
+	for (i = 0; i < 4; i++)
+		if (c->dt[i] == d)
+			break;
+
+	if (i >= 4)
+		return -EINVAL;	/* oops */
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~(3 << c->shift);
+	v |= (i & 3) << c->shift;
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static int alchemy_clk_csrc_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	int scale = c->dt[2] == 3 ? 1 : 2; /* au1300 check */
+
+	return alchemy_clk_fgcs_detr(hw, req, scale, 4);
+}
+
+static const struct clk_ops alchemy_clkops_csrc = {
+	.recalc_rate	= alchemy_clk_csrc_recalc,
+	.determine_rate	= alchemy_clk_csrc_detr,
+	.set_rate	= alchemy_clk_csrc_setr,
+	.set_parent	= alchemy_clk_csrc_setp,
+	.get_parent	= alchemy_clk_csrc_getp,
+	.enable		= alchemy_clk_csrc_en,
+	.disable	= alchemy_clk_csrc_dis,
+	.is_enabled	= alchemy_clk_csrc_isen,
+};
+
+static const char * const alchemy_clk_csrc_parents[] = {
+	/* disabled at index 0 */ ALCHEMY_AUXPLL_CLK,
+	ALCHEMY_FG0_CLK, ALCHEMY_FG1_CLK, ALCHEMY_FG2_CLK,
+	ALCHEMY_FG3_CLK, ALCHEMY_FG4_CLK, ALCHEMY_FG5_CLK
+};
+
+/* divider tables */
+static int alchemy_csrc_dt1[] = { 1, 4, 1, 2 };	/* rest */
+static int alchemy_csrc_dt2[] = { 1, 4, 3, 2 };	/* Au1300 */
+
+static int __init alchemy_clk_setup_imux(int ctype)
+{
+	struct alchemy_fgcs_clk *a;
+	const char * const *names;
+	struct clk_init_data id;
+	unsigned long v;
+	int i, ret, *dt;
+	struct clk *c;
+
+	id.ops = &alchemy_clkops_csrc;
+	id.parent_names = alchemy_clk_csrc_parents;
+	id.num_parents = 7;
+	id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE;
+
+	dt = alchemy_csrc_dt1;
+	switch (ctype) {
+	case ALCHEMY_CPU_AU1000:
+		names = alchemy_au1000_intclknames;
+		break;
+	case ALCHEMY_CPU_AU1500:
+		names = alchemy_au1500_intclknames;
+		break;
+	case ALCHEMY_CPU_AU1100:
+		names = alchemy_au1100_intclknames;
+		break;
+	case ALCHEMY_CPU_AU1550:
+		names = alchemy_au1550_intclknames;
+		break;
+	case ALCHEMY_CPU_AU1200:
+		names = alchemy_au1200_intclknames;
+		break;
+	case ALCHEMY_CPU_AU1300:
+		dt = alchemy_csrc_dt2;
+		names = alchemy_au1300_intclknames;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	a = kcalloc(6, sizeof(*a), GFP_KERNEL);
+	if (!a)
+		return -ENOMEM;
+
+	ret = 0;
+
+	for (i = 0; i < 6; i++) {
+		id.name = names[i];
+		if (!id.name)
+			goto next;
+
+		a->shift = i * 5;
+		a->reg = AU1000_SYS_CLKSRC;
+		a->reglock = &alchemy_clk_csrc_lock;
+		a->dt = dt;
+
+		/* default to first parent clock if mux is initially
+		 * set to disabled state.
+		 */
+		v = alchemy_rdsys(a->reg);
+		a->parent = ((v >> a->shift) >> 2) & 7;
+		if (!a->parent) {
+			a->parent = 1;
+			a->isen = 0;
+		} else
+			a->isen = 1;
+
+		a->hw.init = &id;
+		c = clk_register(NULL, &a->hw);
+		if (IS_ERR(c))
+			ret++;
+		else
+			clk_register_clkdev(c, id.name, NULL);
+next:
+		a++;
+	}
+
+	return ret;
+}
+
+
+/**********************************************************************/
+
+
+#define ERRCK(x)						\
+	if (IS_ERR(x)) {					\
+		ret = PTR_ERR(x);				\
+		goto out;					\
+	}
+
+static int __init alchemy_clk_init(void)
+{
+	int ctype = alchemy_get_cputype(), ret, i;
+	struct clk_aliastable *t = alchemy_clk_aliases;
+	struct clk *c;
+
+	/* Root of the Alchemy clock tree: external 12MHz crystal osc */
+	c = clk_register_fixed_rate(NULL, ALCHEMY_ROOT_CLK, NULL,
+					   0, ALCHEMY_ROOTCLK_RATE);
+	ERRCK(c)
+
+	/* CPU core clock */
+	c = alchemy_clk_setup_cpu(ALCHEMY_ROOT_CLK, ctype);
+	ERRCK(c)
+
+	/* AUXPLLs: max 1GHz on Au1300, 748MHz on older models */
+	i = (ctype == ALCHEMY_CPU_AU1300) ? 84 : 63;
+	c = alchemy_clk_setup_aux(ALCHEMY_ROOT_CLK, ALCHEMY_AUXPLL_CLK,
+				  i, AU1000_SYS_AUXPLL);
+	ERRCK(c)
+
+	if (ctype == ALCHEMY_CPU_AU1300) {
+		c = alchemy_clk_setup_aux(ALCHEMY_ROOT_CLK,
+					  ALCHEMY_AUXPLL2_CLK, i,
+					  AU1300_SYS_AUXPLL2);
+		ERRCK(c)
+	}
+
+	/* sysbus clock: cpu core clock divided by 2, 3 or 4 */
+	c = alchemy_clk_setup_sysbus(ALCHEMY_CPU_CLK);
+	ERRCK(c)
+
+	/* peripheral clock: runs at half rate of sysbus clk */
+	c = alchemy_clk_setup_periph(ALCHEMY_SYSBUS_CLK);
+	ERRCK(c)
+
+	/* SDR/DDR memory clock */
+	c = alchemy_clk_setup_mem(ALCHEMY_SYSBUS_CLK, ctype);
+	ERRCK(c)
+
+	/* L/RCLK: external static bus clock for synchronous mode */
+	c = alchemy_clk_setup_lrclk(ALCHEMY_PERIPH_CLK, ctype);
+	ERRCK(c)
+
+	/* Frequency dividers 0-5 */
+	ret = alchemy_clk_init_fgens(ctype);
+	if (ret) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* diving muxes for internal sources */
+	ret = alchemy_clk_setup_imux(ctype);
+	if (ret) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* set up aliases drivers might look for */
+	while (t->base) {
+		if (t->cputype == ctype)
+			clk_add_alias(t->alias, NULL, t->base, NULL);
+		t++;
+	}
+
+	pr_info("Alchemy clocktree installed\n");
+	return 0;
+
+out:
+	return ret;
+}
+postcore_initcall(alchemy_clk_init);
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
new file mode 100644
index 0000000000..6a3c890f7b
--- /dev/null
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -0,0 +1,1092 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *      The Descriptor Based DMA channel manager that first appeared
+ *	on the Au1550.  I started with dma.c, but I think all that is
+ *	left is this initial comment :-)
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ *	dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/dma-map-ops.h> /* for dma_default_coherent */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/export.h>
+#include <linux/syscore_ops.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+
+/*
+ * The Descriptor Based DMA supports up to 16 channels.
+ *
+ * There are 32 devices defined. We keep an internal structure
+ * of devices using these channels, along with additional
+ * information.
+ *
+ * We allocate the descriptors and allow access to them through various
+ * functions.  The drivers allocate the data buffers and assign them
+ * to the descriptors.
+ */
+static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
+
+/* I couldn't find a macro that did this... */
+#define ALIGN_ADDR(x, a)	((((u32)(x)) + (a-1)) & ~(a-1))
+
+static dbdma_global_t *dbdma_gptr =
+			(dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+static int dbdma_initialized;
+
+static dbdev_tab_t *dbdev_tab;
+
+static dbdev_tab_t au1550_dbdev_tab[] __initdata = {
+	/* UARTS */
+	{ AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
+	{ AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN,  0, 8, 0x11100000, 0, 0 },
+	{ AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
+	{ AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN,  0, 8, 0x11400000, 0, 0 },
+
+	/* EXT DMA */
+	{ AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
+
+	/* USB DEV */
+	{ AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN,  4, 8, 0x10200000, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN,  4, 8, 0x10200010, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN,  4, 8, 0x10200014, 0, 0 },
+
+	/* PSCs */
+	{ AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN,  0, 0, 0x11a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN,  0, 0, 0x11b0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN,  0, 0, 0x10a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN,  0, 0, 0x10b0001c, 0, 0 },
+
+	{ AU1550_DSCR_CMD0_PCI_WRITE,  0, 0, 0, 0x00000000, 0, 0 },  /* PCI */
+	{ AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */
+
+	/* MAC 0 */
+	{ AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN,  0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
+
+	/* MAC 1 */
+	{ AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN,  0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
+
+	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
+
+static dbdev_tab_t au1200_dbdev_tab[] __initdata = {
+	{ AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
+	{ AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN,  0, 8, 0x11100000, 0, 0 },
+	{ AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
+	{ AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN,  0, 8, 0x11200000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
+	{ AU1200_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN,  4, 8, 0x10600004, 0, 0 },
+	{ AU1200_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
+	{ AU1200_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN,  4, 8, 0x10680004, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
+	{ AU1200_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_PSC0_TX,   DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC0_RX,   DEV_FLAGS_IN,  0, 16, 0x11a0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC1_TX,   DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC1_RX,   DEV_FLAGS_IN,  0, 16, 0x11b0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_CIM_RXA,  DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
+	{ AU1200_DSCR_CMD0_CIM_RXB,  DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
+	{ AU1200_DSCR_CMD0_CIM_RXC,  DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
+	{ AU1200_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+
+	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
+
+static dbdev_tab_t au1300_dbdev_tab[] __initdata = {
+	{ AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8,  0x10100004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN,  0, 8,  0x10100000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8,  0x10101004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN,  0, 8,  0x10101000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8,  0x10102004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN,  0, 8,  0x10102000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8,  0x10103004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN,  0, 8,  0x10103000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8,  0x10600000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN,  4, 8,  0x10600004, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8,  0x10601000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN,  8, 8,  0x10601004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN ,   4, 32, 0x10300008, 0, 0 },
+	{ AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT,   4, 32, 0x10300004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0001c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN,   0, 16, 0x10a0001c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0101c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN,   0, 16, 0x10a0101c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0201c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN,   0, 16, 0x10a0201c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0301c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN,   0, 16, 0x10a0301c, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE,   0, 0,  0x00000000, 0, 0 },
+	{ AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8,  0x10602000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN,  4, 8,  0x10602004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE,  0, 32, 0x14001810, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+
+	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
+
+/* 32 predefined plus 32 custom */
+#define DBDEV_TAB_SIZE		64
+
+static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
+
+static dbdev_tab_t *find_dbdev_id(u32 id)
+{
+	int i;
+	dbdev_tab_t *p;
+	for (i = 0; i < DBDEV_TAB_SIZE; ++i) {
+		p = &dbdev_tab[i];
+		if (p->dev_id == id)
+			return p;
+	}
+	return NULL;
+}
+
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+{
+	return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+}
+EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
+
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
+{
+	u32 ret = 0;
+	dbdev_tab_t *p;
+	static u16 new_id = 0x1000;
+
+	p = find_dbdev_id(~0);
+	if (NULL != p) {
+		memcpy(p, dev, sizeof(dbdev_tab_t));
+		p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
+		ret = p->dev_id;
+		new_id++;
+#if 0
+		printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
+				  p->dev_id, p->dev_flags, p->dev_physaddr);
+#endif
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(au1xxx_ddma_add_device);
+
+void au1xxx_ddma_del_device(u32 devid)
+{
+	dbdev_tab_t *p = find_dbdev_id(devid);
+
+	if (p != NULL) {
+		memset(p, 0, sizeof(dbdev_tab_t));
+		p->dev_id = ~0;
+	}
+}
+EXPORT_SYMBOL(au1xxx_ddma_del_device);
+
+/* Allocate a channel and return a non-zero descriptor if successful. */
+u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+       void (*callback)(int, void *), void *callparam)
+{
+	unsigned long	flags;
+	u32		used, chan;
+	u32		dcp;
+	int		i;
+	dbdev_tab_t	*stp, *dtp;
+	chan_tab_t	*ctp;
+	au1x_dma_chan_t *cp;
+
+	/*
+	 * We do the initialization on the first channel allocation.
+	 * We have to wait because of the interrupt handler initialization
+	 * which can't be done successfully during board set up.
+	 */
+	if (!dbdma_initialized)
+		return 0;
+
+	stp = find_dbdev_id(srcid);
+	if (stp == NULL)
+		return 0;
+	dtp = find_dbdev_id(destid);
+	if (dtp == NULL)
+		return 0;
+
+	used = 0;
+
+	/* Check to see if we can get both channels. */
+	spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
+	if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
+	     (stp->dev_flags & DEV_FLAGS_ANYUSE)) {
+		/* Got source */
+		stp->dev_flags |= DEV_FLAGS_INUSE;
+		if (!(dtp->dev_flags & DEV_FLAGS_INUSE) ||
+		     (dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
+			/* Got destination */
+			dtp->dev_flags |= DEV_FLAGS_INUSE;
+		} else {
+			/* Can't get dest.  Release src. */
+			stp->dev_flags &= ~DEV_FLAGS_INUSE;
+			used++;
+		}
+	} else
+		used++;
+	spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
+
+	if (used)
+		return 0;
+
+	/* Let's see if we can allocate a channel for it. */
+	ctp = NULL;
+	chan = 0;
+	spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
+	for (i = 0; i < NUM_DBDMA_CHANS; i++)
+		if (chan_tab_ptr[i] == NULL) {
+			/*
+			 * If kmalloc fails, it is caught below same
+			 * as a channel not available.
+			 */
+			ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
+			chan_tab_ptr[i] = ctp;
+			break;
+		}
+	spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
+
+	if (ctp != NULL) {
+		memset(ctp, 0, sizeof(chan_tab_t));
+		ctp->chan_index = chan = i;
+		dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+		dcp += (0x0100 * chan);
+		ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
+		cp = (au1x_dma_chan_t *)dcp;
+		ctp->chan_src = stp;
+		ctp->chan_dest = dtp;
+		ctp->chan_callback = callback;
+		ctp->chan_callparam = callparam;
+
+		/* Initialize channel configuration. */
+		i = 0;
+		if (stp->dev_intlevel)
+			i |= DDMA_CFG_SED;
+		if (stp->dev_intpolarity)
+			i |= DDMA_CFG_SP;
+		if (dtp->dev_intlevel)
+			i |= DDMA_CFG_DED;
+		if (dtp->dev_intpolarity)
+			i |= DDMA_CFG_DP;
+		if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+			(dtp->dev_flags & DEV_FLAGS_SYNC))
+				i |= DDMA_CFG_SYNC;
+		cp->ddma_cfg = i;
+		wmb(); /* drain writebuffer */
+
+		/*
+		 * Return a non-zero value that can be used to find the channel
+		 * information in subsequent operations.
+		 */
+		return (u32)(&chan_tab_ptr[chan]);
+	}
+
+	/* Release devices */
+	stp->dev_flags &= ~DEV_FLAGS_INUSE;
+	dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+
+	return 0;
+}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
+
+/*
+ * Set the device width if source or destination is a FIFO.
+ * Should be 8, 16, or 32 bits.
+ */
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
+{
+	u32		rv;
+	chan_tab_t	*ctp;
+	dbdev_tab_t	*stp, *dtp;
+
+	ctp = *((chan_tab_t **)chanid);
+	stp = ctp->chan_src;
+	dtp = ctp->chan_dest;
+	rv = 0;
+
+	if (stp->dev_flags & DEV_FLAGS_IN) {	/* Source in fifo */
+		rv = stp->dev_devwidth;
+		stp->dev_devwidth = bits;
+	}
+	if (dtp->dev_flags & DEV_FLAGS_OUT) {	/* Destination out fifo */
+		rv = dtp->dev_devwidth;
+		dtp->dev_devwidth = bits;
+	}
+
+	return rv;
+}
+EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
+
+/* Allocate a descriptor ring, initializing as much as possible. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
+{
+	int			i;
+	u32			desc_base, srcid, destid;
+	u32			cmd0, cmd1, src1, dest1;
+	u32			src0, dest0;
+	chan_tab_t		*ctp;
+	dbdev_tab_t		*stp, *dtp;
+	au1x_ddma_desc_t	*dp;
+
+	/*
+	 * I guess we could check this to be within the
+	 * range of the table......
+	 */
+	ctp = *((chan_tab_t **)chanid);
+	stp = ctp->chan_src;
+	dtp = ctp->chan_dest;
+
+	/*
+	 * The descriptors must be 32-byte aligned.  There is a
+	 * possibility the allocation will give us such an address,
+	 * and if we try that first we are likely to not waste larger
+	 * slabs of memory.
+	 */
+	desc_base = (u32)kmalloc_array(entries, sizeof(au1x_ddma_desc_t),
+				       GFP_KERNEL|GFP_DMA);
+	if (desc_base == 0)
+		return 0;
+
+	if (desc_base & 0x1f) {
+		/*
+		 * Lost....do it again, allocate extra, and round
+		 * the address base.
+		 */
+		kfree((const void *)desc_base);
+		i = entries * sizeof(au1x_ddma_desc_t);
+		i += (sizeof(au1x_ddma_desc_t) - 1);
+		desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA);
+		if (desc_base == 0)
+			return 0;
+
+		ctp->cdb_membase = desc_base;
+		desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
+	} else
+		ctp->cdb_membase = desc_base;
+
+	dp = (au1x_ddma_desc_t *)desc_base;
+
+	/* Keep track of the base descriptor. */
+	ctp->chan_desc_base = dp;
+
+	/* Initialize the rings with as much information as we know. */
+	srcid = stp->dev_id;
+	destid = dtp->dev_id;
+
+	cmd0 = cmd1 = src1 = dest1 = 0;
+	src0 = dest0 = 0;
+
+	cmd0 |= DSCR_CMD0_SID(srcid);
+	cmd0 |= DSCR_CMD0_DID(destid);
+	cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
+	cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
+
+	/* Is it mem to mem transfer? */
+	if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) ||
+	     (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
+	    ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) ||
+	     (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS)))
+		cmd0 |= DSCR_CMD0_MEM;
+
+	switch (stp->dev_devwidth) {
+	case 8:
+		cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_BYTE);
+		break;
+	case 16:
+		cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_HALFWORD);
+		break;
+	case 32:
+	default:
+		cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_WORD);
+		break;
+	}
+
+	switch (dtp->dev_devwidth) {
+	case 8:
+		cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_BYTE);
+		break;
+	case 16:
+		cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_HALFWORD);
+		break;
+	case 32:
+	default:
+		cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_WORD);
+		break;
+	}
+
+	/*
+	 * If the device is marked as an in/out FIFO, ensure it is
+	 * set non-coherent.
+	 */
+	if (stp->dev_flags & DEV_FLAGS_IN)
+		cmd0 |= DSCR_CMD0_SN;		/* Source in FIFO */
+	if (dtp->dev_flags & DEV_FLAGS_OUT)
+		cmd0 |= DSCR_CMD0_DN;		/* Destination out FIFO */
+
+	/*
+	 * Set up source1.  For now, assume no stride and increment.
+	 * A channel attribute update can change this later.
+	 */
+	switch (stp->dev_tsize) {
+	case 1:
+		src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE1);
+		break;
+	case 2:
+		src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE2);
+		break;
+	case 4:
+		src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE4);
+		break;
+	case 8:
+	default:
+		src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE8);
+		break;
+	}
+
+	/* If source input is FIFO, set static address. */
+	if (stp->dev_flags & DEV_FLAGS_IN) {
+		if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
+			src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
+		else
+			src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
+	}
+
+	if (stp->dev_physaddr)
+		src0 = stp->dev_physaddr;
+
+	/*
+	 * Set up dest1.  For now, assume no stride and increment.
+	 * A channel attribute update can change this later.
+	 */
+	switch (dtp->dev_tsize) {
+	case 1:
+		dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE1);
+		break;
+	case 2:
+		dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE2);
+		break;
+	case 4:
+		dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE4);
+		break;
+	case 8:
+	default:
+		dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE8);
+		break;
+	}
+
+	/* If destination output is FIFO, set static address. */
+	if (dtp->dev_flags & DEV_FLAGS_OUT) {
+		if (dtp->dev_flags & DEV_FLAGS_BURSTABLE)
+			dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+		else
+			dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
+	}
+
+	if (dtp->dev_physaddr)
+		dest0 = dtp->dev_physaddr;
+
+#if 0
+		printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
+				  "source1:%x dest0:%x dest1:%x\n",
+				  dtp->dev_id, stp->dev_id, cmd0, cmd1, src0,
+				  src1, dest0, dest1);
+#endif
+	for (i = 0; i < entries; i++) {
+		dp->dscr_cmd0 = cmd0;
+		dp->dscr_cmd1 = cmd1;
+		dp->dscr_source0 = src0;
+		dp->dscr_source1 = src1;
+		dp->dscr_dest0 = dest0;
+		dp->dscr_dest1 = dest1;
+		dp->dscr_stat = 0;
+		dp->sw_context = 0;
+		dp->sw_status = 0;
+		dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
+		dp++;
+	}
+
+	/* Make last descriptor point to the first. */
+	dp--;
+	dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
+	ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
+
+	return (u32)ctp->chan_desc_base;
+}
+EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
+
+/*
+ * Put a source buffer into the DMA ring.
+ * This updates the source pointer and byte count.  Normally used
+ * for memory to fifo transfers.
+ */
+u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
+{
+	chan_tab_t		*ctp;
+	au1x_ddma_desc_t	*dp;
+
+	/*
+	 * I guess we could check this to be within the
+	 * range of the table......
+	 */
+	ctp = *(chan_tab_t **)chanid;
+
+	/*
+	 * We should have multiple callers for a particular channel,
+	 * an interrupt doesn't affect this pointer nor the descriptor,
+	 * so no locking should be needed.
+	 */
+	dp = ctp->put_ptr;
+
+	/*
+	 * If the descriptor is valid, we are way ahead of the DMA
+	 * engine, so just return an error condition.
+	 */
+	if (dp->dscr_cmd0 & DSCR_CMD0_V)
+		return 0;
+
+	/* Load up buffer address and byte count. */
+	dp->dscr_source0 = buf & ~0UL;
+	dp->dscr_cmd1 = nbytes;
+	/* Check flags */
+	if (flags & DDMA_FLAGS_IE)
+		dp->dscr_cmd0 |= DSCR_CMD0_IE;
+	if (flags & DDMA_FLAGS_NOIE)
+		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
+	/*
+	 * There is an erratum on certain Au1200/Au1550 revisions that could
+	 * result in "stale" data being DMA'ed. It has to do with the snoop
+	 * logic on the cache eviction buffer.  dma_default_coherent is set
+	 * to false on these parts.
+	 */
+	if (!dma_default_coherent)
+		dma_cache_wback_inv(KSEG0ADDR(buf), nbytes);
+	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
+	wmb(); /* drain writebuffer */
+	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
+	ctp->chan_ptr->ddma_dbell = 0;
+	wmb(); /* force doorbell write out to dma engine */
+
+	/* Get next descriptor pointer. */
+	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+	/* Return something non-zero. */
+	return nbytes;
+}
+EXPORT_SYMBOL(au1xxx_dbdma_put_source);
+
+/* Put a destination buffer into the DMA ring.
+ * This updates the destination pointer and byte count.  Normally used
+ * to place an empty buffer into the ring for fifo to memory transfers.
+ */
+u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
+{
+	chan_tab_t		*ctp;
+	au1x_ddma_desc_t	*dp;
+
+	/* I guess we could check this to be within the
+	 * range of the table......
+	 */
+	ctp = *((chan_tab_t **)chanid);
+
+	/* We should have multiple callers for a particular channel,
+	 * an interrupt doesn't affect this pointer nor the descriptor,
+	 * so no locking should be needed.
+	 */
+	dp = ctp->put_ptr;
+
+	/* If the descriptor is valid, we are way ahead of the DMA
+	 * engine, so just return an error condition.
+	 */
+	if (dp->dscr_cmd0 & DSCR_CMD0_V)
+		return 0;
+
+	/* Load up buffer address and byte count */
+
+	/* Check flags  */
+	if (flags & DDMA_FLAGS_IE)
+		dp->dscr_cmd0 |= DSCR_CMD0_IE;
+	if (flags & DDMA_FLAGS_NOIE)
+		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
+	dp->dscr_dest0 = buf & ~0UL;
+	dp->dscr_cmd1 = nbytes;
+#if 0
+	printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+			  dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+			  dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
+#endif
+	/*
+	 * There is an erratum on certain Au1200/Au1550 revisions that could
+	 * result in "stale" data being DMA'ed. It has to do with the snoop
+	 * logic on the cache eviction buffer.  dma_default_coherent is set
+	 * to false on these parts.
+	 */
+	if (!dma_default_coherent)
+		dma_cache_inv(KSEG0ADDR(buf), nbytes);
+	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
+	wmb(); /* drain writebuffer */
+	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
+	ctp->chan_ptr->ddma_dbell = 0;
+	wmb(); /* force doorbell write out to dma engine */
+
+	/* Get next descriptor pointer. */
+	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+	/* Return something non-zero. */
+	return nbytes;
+}
+EXPORT_SYMBOL(au1xxx_dbdma_put_dest);
+
+/*
+ * Get a destination buffer into the DMA ring.
+ * Normally used to get a full buffer from the ring during fifo
+ * to memory transfers.  This does not set the valid bit, you will
+ * have to put another destination buffer to keep the DMA going.
+ */
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
+{
+	chan_tab_t		*ctp;
+	au1x_ddma_desc_t	*dp;
+	u32			rv;
+
+	/*
+	 * I guess we could check this to be within the
+	 * range of the table......
+	 */
+	ctp = *((chan_tab_t **)chanid);
+
+	/*
+	 * We should have multiple callers for a particular channel,
+	 * an interrupt doesn't affect this pointer nor the descriptor,
+	 * so no locking should be needed.
+	 */
+	dp = ctp->get_ptr;
+
+	/*
+	 * If the descriptor is valid, we are way ahead of the DMA
+	 * engine, so just return an error condition.
+	 */
+	if (dp->dscr_cmd0 & DSCR_CMD0_V)
+		return 0;
+
+	/* Return buffer address and byte count. */
+	*buf = (void *)(phys_to_virt(dp->dscr_dest0));
+	*nbytes = dp->dscr_cmd1;
+	rv = dp->dscr_stat;
+
+	/* Get next descriptor pointer. */
+	ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+	/* Return something non-zero. */
+	return rv;
+}
+EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
+
+void au1xxx_dbdma_stop(u32 chanid)
+{
+	chan_tab_t	*ctp;
+	au1x_dma_chan_t *cp;
+	int halt_timeout = 0;
+
+	ctp = *((chan_tab_t **)chanid);
+
+	cp = ctp->chan_ptr;
+	cp->ddma_cfg &= ~DDMA_CFG_EN;	/* Disable channel */
+	wmb(); /* drain writebuffer */
+	while (!(cp->ddma_stat & DDMA_STAT_H)) {
+		udelay(1);
+		halt_timeout++;
+		if (halt_timeout > 100) {
+			printk(KERN_WARNING "warning: DMA channel won't halt\n");
+			break;
+		}
+	}
+	/* clear current desc valid and doorbell */
+	cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
+	wmb(); /* drain writebuffer */
+}
+EXPORT_SYMBOL(au1xxx_dbdma_stop);
+
+/*
+ * Start using the current descriptor pointer.  If the DBDMA encounters
+ * a non-valid descriptor, it will stop.  In this case, we can just
+ * continue by adding a buffer to the list and starting again.
+ */
+void au1xxx_dbdma_start(u32 chanid)
+{
+	chan_tab_t	*ctp;
+	au1x_dma_chan_t *cp;
+
+	ctp = *((chan_tab_t **)chanid);
+	cp = ctp->chan_ptr;
+	cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
+	cp->ddma_cfg |= DDMA_CFG_EN;	/* Enable channel */
+	wmb(); /* drain writebuffer */
+	cp->ddma_dbell = 0;
+	wmb(); /* drain writebuffer */
+}
+EXPORT_SYMBOL(au1xxx_dbdma_start);
+
+void au1xxx_dbdma_reset(u32 chanid)
+{
+	chan_tab_t		*ctp;
+	au1x_ddma_desc_t	*dp;
+
+	au1xxx_dbdma_stop(chanid);
+
+	ctp = *((chan_tab_t **)chanid);
+	ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
+
+	/* Run through the descriptors and reset the valid indicator. */
+	dp = ctp->chan_desc_base;
+
+	do {
+		dp->dscr_cmd0 &= ~DSCR_CMD0_V;
+		/*
+		 * Reset our software status -- this is used to determine
+		 * if a descriptor is in use by upper level software. Since
+		 * posting can reset 'V' bit.
+		 */
+		dp->sw_status = 0;
+		dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+	} while (dp != ctp->chan_desc_base);
+}
+EXPORT_SYMBOL(au1xxx_dbdma_reset);
+
+u32 au1xxx_get_dma_residue(u32 chanid)
+{
+	chan_tab_t	*ctp;
+	au1x_dma_chan_t *cp;
+	u32		rv;
+
+	ctp = *((chan_tab_t **)chanid);
+	cp = ctp->chan_ptr;
+
+	/* This is only valid if the channel is stopped. */
+	rv = cp->ddma_bytecnt;
+	wmb(); /* drain writebuffer */
+
+	return rv;
+}
+EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
+
+void au1xxx_dbdma_chan_free(u32 chanid)
+{
+	chan_tab_t	*ctp;
+	dbdev_tab_t	*stp, *dtp;
+
+	ctp = *((chan_tab_t **)chanid);
+	stp = ctp->chan_src;
+	dtp = ctp->chan_dest;
+
+	au1xxx_dbdma_stop(chanid);
+
+	kfree((void *)ctp->cdb_membase);
+
+	stp->dev_flags &= ~DEV_FLAGS_INUSE;
+	dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+	chan_tab_ptr[ctp->chan_index] = NULL;
+
+	kfree(ctp);
+}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
+
+static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
+{
+	u32 intstat;
+	u32 chan_index;
+	chan_tab_t		*ctp;
+	au1x_ddma_desc_t	*dp;
+	au1x_dma_chan_t *cp;
+
+	intstat = dbdma_gptr->ddma_intstat;
+	wmb(); /* drain writebuffer */
+	chan_index = __ffs(intstat);
+
+	ctp = chan_tab_ptr[chan_index];
+	cp = ctp->chan_ptr;
+	dp = ctp->cur_ptr;
+
+	/* Reset interrupt. */
+	cp->ddma_irq = 0;
+	wmb(); /* drain writebuffer */
+
+	if (ctp->chan_callback)
+		ctp->chan_callback(irq, ctp->chan_callparam);
+
+	ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+	return IRQ_RETVAL(1);
+}
+
+void au1xxx_dbdma_dump(u32 chanid)
+{
+	chan_tab_t	 *ctp;
+	au1x_ddma_desc_t *dp;
+	dbdev_tab_t	 *stp, *dtp;
+	au1x_dma_chan_t	 *cp;
+	u32 i		 = 0;
+
+	ctp = *((chan_tab_t **)chanid);
+	stp = ctp->chan_src;
+	dtp = ctp->chan_dest;
+	cp = ctp->chan_ptr;
+
+	printk(KERN_DEBUG "Chan %x, stp %x (dev %d)  dtp %x (dev %d)\n",
+			  (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
+			  dtp - dbdev_tab);
+	printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
+			  (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
+			  (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
+
+	printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
+	printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
+			  cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
+	printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
+			  cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat,
+			  cp->ddma_bytecnt);
+
+	/* Run through the descriptors */
+	dp = ctp->chan_desc_base;
+
+	do {
+		printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+				  i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+		printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+				  dp->dscr_source0, dp->dscr_source1,
+				  dp->dscr_dest0, dp->dscr_dest1);
+		printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
+				  dp->dscr_stat, dp->dscr_nxtptr);
+		dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+	} while (dp != ctp->chan_desc_base);
+}
+
+/* Put a descriptor into the DMA ring.
+ * This updates the source/destination pointers and byte count.
+ */
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
+{
+	chan_tab_t *ctp;
+	au1x_ddma_desc_t *dp;
+	u32 nbytes = 0;
+
+	/*
+	 * I guess we could check this to be within the
+	 * range of the table......
+	 */
+	ctp = *((chan_tab_t **)chanid);
+
+	/*
+	 * We should have multiple callers for a particular channel,
+	 * an interrupt doesn't affect this pointer nor the descriptor,
+	 * so no locking should be needed.
+	 */
+	dp = ctp->put_ptr;
+
+	/*
+	 * If the descriptor is valid, we are way ahead of the DMA
+	 * engine, so just return an error condition.
+	 */
+	if (dp->dscr_cmd0 & DSCR_CMD0_V)
+		return 0;
+
+	/* Load up buffer addresses and byte count. */
+	dp->dscr_dest0 = dscr->dscr_dest0;
+	dp->dscr_source0 = dscr->dscr_source0;
+	dp->dscr_dest1 = dscr->dscr_dest1;
+	dp->dscr_source1 = dscr->dscr_source1;
+	dp->dscr_cmd1 = dscr->dscr_cmd1;
+	nbytes = dscr->dscr_cmd1;
+	/* Allow the caller to specify if an interrupt is generated */
+	dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+	dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
+	ctp->chan_ptr->ddma_dbell = 0;
+
+	/* Get next descriptor pointer. */
+	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+	/* Return something non-zero. */
+	return nbytes;
+}
+
+
+static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6];
+
+static int alchemy_dbdma_suspend(void)
+{
+	int i;
+	void __iomem *addr;
+
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00);
+	alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04);
+	alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08);
+	alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c);
+
+	/* save channel configurations */
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+	for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+		alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00);
+		alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04);
+		alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08);
+		alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c);
+		alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10);
+		alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14);
+
+		/* halt channel */
+		__raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00);
+		wmb();
+		while (!(__raw_readl(addr + 0x14) & 1))
+			wmb();
+
+		addr += 0x100;	/* next channel base */
+	}
+	/* disable channel interrupts */
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	__raw_writel(0, addr + 0x0c);
+	wmb();
+
+	return 0;
+}
+
+static void alchemy_dbdma_resume(void)
+{
+	int i;
+	void __iomem *addr;
+
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	__raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00);
+	__raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04);
+	__raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08);
+	__raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c);
+
+	/* restore channel configurations */
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+	for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+		__raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00);
+		__raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04);
+		__raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08);
+		__raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c);
+		__raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10);
+		__raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14);
+		wmb();
+		addr += 0x100;	/* next channel base */
+	}
+}
+
+static struct syscore_ops alchemy_dbdma_syscore_ops = {
+	.suspend	= alchemy_dbdma_suspend,
+	.resume		= alchemy_dbdma_resume,
+};
+
+static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
+{
+	int ret;
+
+	dbdev_tab = kcalloc(DBDEV_TAB_SIZE, sizeof(dbdev_tab_t), GFP_KERNEL);
+	if (!dbdev_tab)
+		return -ENOMEM;
+
+	memcpy(dbdev_tab, idtable, 32 * sizeof(dbdev_tab_t));
+	for (ret = 32; ret < DBDEV_TAB_SIZE; ret++)
+		dbdev_tab[ret].dev_id = ~0;
+
+	dbdma_gptr->ddma_config = 0;
+	dbdma_gptr->ddma_throttle = 0;
+	dbdma_gptr->ddma_inten = 0xffff;
+	wmb(); /* drain writebuffer */
+
+	ret = request_irq(irq, dbdma_interrupt, 0, "dbdma", (void *)dbdma_gptr);
+	if (ret)
+		printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
+	else {
+		dbdma_initialized = 1;
+		register_syscore_ops(&alchemy_dbdma_syscore_ops);
+	}
+
+	return ret;
+}
+
+static int __init alchemy_dbdma_init(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1550:
+		return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab);
+	case ALCHEMY_CPU_AU1200:
+		return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab);
+	case ALCHEMY_CPU_AU1300:
+		return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab);
+	}
+	return 0;
+}
+subsys_initcall(alchemy_dbdma_init);
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
new file mode 100644
index 0000000000..973049b5bd
--- /dev/null
+++ b/arch/mips/alchemy/common/dma.c
@@ -0,0 +1,265 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *      A DMA channel allocator for Au1x00. API is modeled loosely off of
+ *      linux/kernel/dma.c.
+ *
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1000_dma.h>
+
+/*
+ * A note on resource allocation:
+ *
+ * All drivers needing DMA channels, should allocate and release them
+ * through the public routines `request_dma()' and `free_dma()'.
+ *
+ * In order to avoid problems, all processes should allocate resources in
+ * the same sequence and release them in the reverse order.
+ *
+ * So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ.
+ * When releasing them, first release the IRQ, then release the DMA. The
+ * main reason for this order is that, if you are requesting the DMA buffer
+ * done interrupt, you won't know the irq number until the DMA channel is
+ * returned from request_dma.
+ */
+
+/* DMA Channel register block spacing */
+#define DMA_CHANNEL_LEN		0x00000100
+
+DEFINE_SPINLOCK(au1000_dma_spin_lock);
+
+struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,}
+};
+EXPORT_SYMBOL(au1000_dma_table);
+
+/* Device FIFO addresses and default DMA modes */
+static const struct dma_dev {
+	unsigned int fifo_addr;
+	unsigned int dma_mode;
+} dma_dev_table[DMA_NUM_DEV] = {
+	{ AU1000_UART0_PHYS_ADDR + 0x04, DMA_DW8 },		/* UART0_TX */
+	{ AU1000_UART0_PHYS_ADDR + 0x00, DMA_DW8 | DMA_DR },	/* UART0_RX */
+	{ 0, 0 },	/* DMA_REQ0 */
+	{ 0, 0 },	/* DMA_REQ1 */
+	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 },		/* AC97 TX c */
+	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR },	/* AC97 RX c */
+	{ AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC },	/* UART3_TX */
+	{ AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+	/* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
+	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC},	/* I2S TX */
+	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
+};
+
+int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
+			 int length, int *eof, void *data)
+{
+	int i, len = 0;
+	struct dma_chan *chan;
+
+	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
+		chan = get_dma_chan(i);
+		if (chan != NULL)
+			len += sprintf(buf + len, "%2d: %s\n",
+				       i, chan->dev_str);
+	}
+
+	if (fpos >= len) {
+		*start = buf;
+		*eof = 1;
+		return 0;
+	}
+	*start = buf + fpos;
+	len -= fpos;
+	if (len > length)
+		return length;
+	*eof = 1;
+	return len;
+}
+
+/* Device FIFO addresses and default DMA modes - 2nd bank */
+static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
+	{ AU1100_SD0_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 },		/* coherent */
+	{ AU1100_SD0_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR },	/* coherent */
+	{ AU1100_SD1_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 },		/* coherent */
+	{ AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }	/* coherent */
+};
+
+void dump_au1000_dma_channel(unsigned int dmanr)
+{
+	struct dma_chan *chan;
+
+	if (dmanr >= NUM_AU1000_DMA_CHANNELS)
+		return;
+	chan = &au1000_dma_table[dmanr];
+
+	printk(KERN_INFO "Au1000 DMA%d Register Dump:\n", dmanr);
+	printk(KERN_INFO "  mode = 0x%08x\n",
+	       __raw_readl(chan->io + DMA_MODE_SET));
+	printk(KERN_INFO "  addr = 0x%08x\n",
+	       __raw_readl(chan->io + DMA_PERIPHERAL_ADDR));
+	printk(KERN_INFO "  start0 = 0x%08x\n",
+	       __raw_readl(chan->io + DMA_BUFFER0_START));
+	printk(KERN_INFO "  start1 = 0x%08x\n",
+	       __raw_readl(chan->io + DMA_BUFFER1_START));
+	printk(KERN_INFO "  count0 = 0x%08x\n",
+	       __raw_readl(chan->io + DMA_BUFFER0_COUNT));
+	printk(KERN_INFO "  count1 = 0x%08x\n",
+	       __raw_readl(chan->io + DMA_BUFFER1_COUNT));
+}
+
+/*
+ * Finds a free channel, and binds the requested device to it.
+ * Returns the allocated channel number, or negative on error.
+ * Requests the DMA done IRQ if irqhandler != NULL.
+ */
+int request_au1000_dma(int dev_id, const char *dev_str,
+		       irq_handler_t irqhandler,
+		       unsigned long irqflags,
+		       void *irq_dev_id)
+{
+	struct dma_chan *chan;
+	const struct dma_dev *dev;
+	int i, ret;
+
+	if (alchemy_get_cputype() == ALCHEMY_CPU_AU1100) {
+		if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
+			return -EINVAL;
+	} else {
+		if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
+			return -EINVAL;
+	}
+
+	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+		if (au1000_dma_table[i].dev_id < 0)
+			break;
+
+	if (i == NUM_AU1000_DMA_CHANNELS)
+		return -ENODEV;
+
+	chan = &au1000_dma_table[i];
+
+	if (dev_id >= DMA_NUM_DEV) {
+		dev_id -= DMA_NUM_DEV;
+		dev = &dma_dev_table_bank2[dev_id];
+	} else
+		dev = &dma_dev_table[dev_id];
+
+	if (irqhandler) {
+		chan->irq_dev = irq_dev_id;
+		ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
+				  chan->irq_dev);
+		if (ret) {
+			chan->irq_dev = NULL;
+			return ret;
+		}
+	} else {
+		chan->irq_dev = NULL;
+	}
+
+	/* fill it in */
+	chan->io = (void __iomem *)(KSEG1ADDR(AU1000_DMA_PHYS_ADDR) +
+			i * DMA_CHANNEL_LEN);
+	chan->dev_id = dev_id;
+	chan->dev_str = dev_str;
+	chan->fifo_addr = dev->fifo_addr;
+	chan->mode = dev->dma_mode;
+
+	/* initialize the channel before returning */
+	init_dma(i);
+
+	return i;
+}
+EXPORT_SYMBOL(request_au1000_dma);
+
+void free_au1000_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan) {
+		printk(KERN_ERR "Error trying to free DMA%d\n", dmanr);
+		return;
+	}
+
+	disable_dma(dmanr);
+	if (chan->irq_dev)
+		free_irq(chan->irq, chan->irq_dev);
+
+	chan->irq_dev = NULL;
+	chan->dev_id = -1;
+}
+EXPORT_SYMBOL(free_au1000_dma);
+
+static int __init au1000_dma_init(void)
+{
+	int base, i;
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		base = AU1000_DMA_INT_BASE;
+		break;
+	case ALCHEMY_CPU_AU1500:
+		base = AU1500_DMA_INT_BASE;
+		break;
+	case ALCHEMY_CPU_AU1100:
+		base = AU1100_DMA_INT_BASE;
+		break;
+	default:
+		goto out;
+	}
+
+	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+		au1000_dma_table[i].irq = base + i;
+
+	printk(KERN_INFO "Alchemy DMA initialized\n");
+
+out:
+	return 0;
+}
+arch_initcall(au1000_dma_init);
diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c
new file mode 100644
index 0000000000..1b16daaa86
--- /dev/null
+++ b/arch/mips/alchemy/common/gpiolib.c
@@ -0,0 +1,172 @@
+/*
+ *  Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *	GPIOLIB support for Alchemy chips.
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Notes :
+ *	au1000 SoC have only one GPIO block : GPIO1
+ *	Au1100, Au15x0, Au12x0 have a second one : GPIO2
+ *	Au1300 is totally different: 1 block with up to 128 GPIOs
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio/driver.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
+
+static int gpio2_get(struct gpio_chip *chip, unsigned offset)
+{
+	return !!alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
+}
+
+static void gpio2_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	alchemy_gpio2_set_value(offset + ALCHEMY_GPIO2_BASE, value);
+}
+
+static int gpio2_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return alchemy_gpio2_direction_input(offset + ALCHEMY_GPIO2_BASE);
+}
+
+static int gpio2_direction_output(struct gpio_chip *chip, unsigned offset,
+				  int value)
+{
+	return alchemy_gpio2_direction_output(offset + ALCHEMY_GPIO2_BASE,
+						value);
+}
+
+static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return alchemy_gpio2_to_irq(offset + ALCHEMY_GPIO2_BASE);
+}
+
+
+static int gpio1_get(struct gpio_chip *chip, unsigned offset)
+{
+	return !!alchemy_gpio1_get_value(offset + ALCHEMY_GPIO1_BASE);
+}
+
+static void gpio1_set(struct gpio_chip *chip,
+				unsigned offset, int value)
+{
+	alchemy_gpio1_set_value(offset + ALCHEMY_GPIO1_BASE, value);
+}
+
+static int gpio1_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return alchemy_gpio1_direction_input(offset + ALCHEMY_GPIO1_BASE);
+}
+
+static int gpio1_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	return alchemy_gpio1_direction_output(offset + ALCHEMY_GPIO1_BASE,
+					     value);
+}
+
+static int gpio1_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return alchemy_gpio1_to_irq(offset + ALCHEMY_GPIO1_BASE);
+}
+
+struct gpio_chip alchemy_gpio_chip[] = {
+	[0] = {
+		.label			= "alchemy-gpio1",
+		.direction_input	= gpio1_direction_input,
+		.direction_output	= gpio1_direction_output,
+		.get			= gpio1_get,
+		.set			= gpio1_set,
+		.to_irq			= gpio1_to_irq,
+		.base			= ALCHEMY_GPIO1_BASE,
+		.ngpio			= ALCHEMY_GPIO1_NUM,
+	},
+	[1] = {
+		.label			= "alchemy-gpio2",
+		.direction_input	= gpio2_direction_input,
+		.direction_output	= gpio2_direction_output,
+		.get			= gpio2_get,
+		.set			= gpio2_set,
+		.to_irq			= gpio2_to_irq,
+		.base			= ALCHEMY_GPIO2_BASE,
+		.ngpio			= ALCHEMY_GPIO2_NUM,
+	},
+};
+
+static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off)
+{
+	return !!au1300_gpio_get_value(off + AU1300_GPIO_BASE);
+}
+
+static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
+{
+	au1300_gpio_set_value(off + AU1300_GPIO_BASE, v);
+}
+
+static int alchemy_gpic_dir_input(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_direction_input(off + AU1300_GPIO_BASE);
+}
+
+static int alchemy_gpic_dir_output(struct gpio_chip *chip, unsigned int off,
+				   int v)
+{
+	return au1300_gpio_direction_output(off + AU1300_GPIO_BASE, v);
+}
+
+static int alchemy_gpic_gpio_to_irq(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_to_irq(off + AU1300_GPIO_BASE);
+}
+
+static struct gpio_chip au1300_gpiochip = {
+	.label			= "alchemy-gpic",
+	.direction_input	= alchemy_gpic_dir_input,
+	.direction_output	= alchemy_gpic_dir_output,
+	.get			= alchemy_gpic_get,
+	.set			= alchemy_gpic_set,
+	.to_irq			= alchemy_gpic_gpio_to_irq,
+	.base			= AU1300_GPIO_BASE,
+	.ngpio			= AU1300_GPIO_NUM,
+};
+
+static int __init alchemy_gpiochip_init(void)
+{
+	int ret = 0;
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		ret = gpiochip_add_data(&alchemy_gpio_chip[0], NULL);
+		break;
+	case ALCHEMY_CPU_AU1500...ALCHEMY_CPU_AU1200:
+		ret = gpiochip_add_data(&alchemy_gpio_chip[0], NULL);
+		ret |= gpiochip_add_data(&alchemy_gpio_chip[1], NULL);
+		break;
+	case ALCHEMY_CPU_AU1300:
+		ret = gpiochip_add_data(&au1300_gpiochip, NULL);
+		break;
+	}
+	return ret;
+}
+arch_initcall(alchemy_gpiochip_init);
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
new file mode 100644
index 0000000000..da9f922004
--- /dev/null
+++ b/arch/mips/alchemy/common/irq.c
@@ -0,0 +1,996 @@
+/*
+ * Copyright 2001, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/syscore_ops.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
+
+/* Interrupt Controller register offsets */
+#define IC_CFG0RD	0x40
+#define IC_CFG0SET	0x40
+#define IC_CFG0CLR	0x44
+#define IC_CFG1RD	0x48
+#define IC_CFG1SET	0x48
+#define IC_CFG1CLR	0x4C
+#define IC_CFG2RD	0x50
+#define IC_CFG2SET	0x50
+#define IC_CFG2CLR	0x54
+#define IC_REQ0INT	0x54
+#define IC_SRCRD	0x58
+#define IC_SRCSET	0x58
+#define IC_SRCCLR	0x5C
+#define IC_REQ1INT	0x5C
+#define IC_ASSIGNRD	0x60
+#define IC_ASSIGNSET	0x60
+#define IC_ASSIGNCLR	0x64
+#define IC_WAKERD	0x68
+#define IC_WAKESET	0x68
+#define IC_WAKECLR	0x6C
+#define IC_MASKRD	0x70
+#define IC_MASKSET	0x70
+#define IC_MASKCLR	0x74
+#define IC_RISINGRD	0x78
+#define IC_RISINGCLR	0x78
+#define IC_FALLINGRD	0x7C
+#define IC_FALLINGCLR	0x7C
+#define IC_TESTBIT	0x80
+
+/* per-processor fixed function irqs */
+struct alchemy_irqmap {
+	int irq;	/* linux IRQ number */
+	int type;	/* IRQ_TYPE_ */
+	int prio;	/* irq priority, 0 highest, 3 lowest */
+	int internal;	/* GPIC: internal source (no ext. pin)? */
+};
+
+static int au1x_ic_settype(struct irq_data *d, unsigned int type);
+static int au1300_gpic_settype(struct irq_data *d, unsigned int type);
+
+
+/* NOTE on interrupt priorities: The original writers of this code said:
+ *
+ * Because of the tight timing of SETUP token to reply transactions,
+ * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
+ * needs the highest priority.
+ */
+struct alchemy_irqmap au1000_irqmap[] __initdata = {
+	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
+	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ -1, },
+};
+
+struct alchemy_irqmap au1500_irqmap[] __initdata = {
+	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
+	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ -1, },
+};
+
+struct alchemy_irqmap au1100_irqmap[] __initdata = {
+	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
+	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ -1, },
+};
+
+struct alchemy_irqmap au1550_irqmap[] __initdata = {
+	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
+	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ -1, },
+};
+
+struct alchemy_irqmap au1200_irqmap[] __initdata = {
+	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ -1, },
+};
+
+static struct alchemy_irqmap au1300_irqmap[] __initdata = {
+	/* multifunction: gpio pin or device */
+	{ AU1300_UART1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_UART2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_UART3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_SD1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_SD2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_NAND_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	/* au1300 internal */
+	{ AU1300_DDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MMU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_GPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_UDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_TOY_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	0, 1, },
+	{ AU1300_UART0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_SD0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_USB_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_LCD_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_BSA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MPE_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_ITE_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_AES_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_CIM_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ -1, },	/* terminator */
+};
+
+/******************************************************************************/
+
+static void au1x_ic0_unmask(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKSET);
+	__raw_writel(1 << bit, base + IC_WAKESET);
+	wmb();
+}
+
+static void au1x_ic1_unmask(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKSET);
+	__raw_writel(1 << bit, base + IC_WAKESET);
+	wmb();
+}
+
+static void au1x_ic0_mask(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	wmb();
+}
+
+static void au1x_ic1_mask(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	wmb();
+}
+
+static void au1x_ic0_ack(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+	/*
+	 * This may assume that we don't get interrupts from
+	 * both edges at once, or if we do, that we don't care.
+	 */
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	wmb();
+}
+
+static void au1x_ic1_ack(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+	/*
+	 * This may assume that we don't get interrupts from
+	 * both edges at once, or if we do, that we don't care.
+	 */
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	wmb();
+}
+
+static void au1x_ic0_maskack(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	wmb();
+}
+
+static void au1x_ic1_maskack(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	wmb();
+}
+
+static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
+{
+	int bit = d->irq - AU1000_INTC1_INT_BASE;
+	unsigned long wakemsk, flags;
+
+	/* only GPIO 0-7 can act as wakeup source.  Fortunately these
+	 * are wired up identically on all supported variants.
+	 */
+	if ((bit < 0) || (bit > 7))
+		return -EINVAL;
+
+	local_irq_save(flags);
+	wakemsk = alchemy_rdsys(AU1000_SYS_WAKEMSK);
+	if (on)
+		wakemsk |= 1 << bit;
+	else
+		wakemsk &= ~(1 << bit);
+	alchemy_wrsys(wakemsk, AU1000_SYS_WAKEMSK);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+/*
+ * irq_chips for both ICs; this way the mask handlers can be
+ * as short as possible.
+ */
+static struct irq_chip au1x_ic0_chip = {
+	.name		= "Alchemy-IC0",
+	.irq_ack	= au1x_ic0_ack,
+	.irq_mask	= au1x_ic0_mask,
+	.irq_mask_ack	= au1x_ic0_maskack,
+	.irq_unmask	= au1x_ic0_unmask,
+	.irq_set_type	= au1x_ic_settype,
+};
+
+static struct irq_chip au1x_ic1_chip = {
+	.name		= "Alchemy-IC1",
+	.irq_ack	= au1x_ic1_ack,
+	.irq_mask	= au1x_ic1_mask,
+	.irq_mask_ack	= au1x_ic1_maskack,
+	.irq_unmask	= au1x_ic1_unmask,
+	.irq_set_type	= au1x_ic_settype,
+	.irq_set_wake	= au1x_ic1_setwake,
+};
+
+static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
+{
+	struct irq_chip *chip;
+	unsigned int bit, irq = d->irq;
+	irq_flow_handler_t handler = NULL;
+	unsigned char *name = NULL;
+	void __iomem *base;
+	int ret;
+
+	if (irq >= AU1000_INTC1_INT_BASE) {
+		bit = irq - AU1000_INTC1_INT_BASE;
+		chip = &au1x_ic1_chip;
+		base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+	} else {
+		bit = irq - AU1000_INTC0_INT_BASE;
+		chip = &au1x_ic0_chip;
+		base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+	}
+
+	if (bit > 31)
+		return -EINVAL;
+
+	ret = 0;
+
+	switch (flow_type) {	/* cfgregs 2:1:0 */
+	case IRQ_TYPE_EDGE_RISING:	/* 0:0:1 */
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1CLR);
+		__raw_writel(1 << bit, base + IC_CFG0SET);
+		handler = handle_edge_irq;
+		name = "riseedge";
+		break;
+	case IRQ_TYPE_EDGE_FALLING:	/* 0:1:0 */
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1SET);
+		__raw_writel(1 << bit, base + IC_CFG0CLR);
+		handler = handle_edge_irq;
+		name = "falledge";
+		break;
+	case IRQ_TYPE_EDGE_BOTH:	/* 0:1:1 */
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1SET);
+		__raw_writel(1 << bit, base + IC_CFG0SET);
+		handler = handle_edge_irq;
+		name = "bothedge";
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:	/* 1:0:1 */
+		__raw_writel(1 << bit, base + IC_CFG2SET);
+		__raw_writel(1 << bit, base + IC_CFG1CLR);
+		__raw_writel(1 << bit, base + IC_CFG0SET);
+		handler = handle_level_irq;
+		name = "hilevel";
+		break;
+	case IRQ_TYPE_LEVEL_LOW:	/* 1:1:0 */
+		__raw_writel(1 << bit, base + IC_CFG2SET);
+		__raw_writel(1 << bit, base + IC_CFG1SET);
+		__raw_writel(1 << bit, base + IC_CFG0CLR);
+		handler = handle_level_irq;
+		name = "lowlevel";
+		break;
+	case IRQ_TYPE_NONE:		/* 0:0:0 */
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1CLR);
+		__raw_writel(1 << bit, base + IC_CFG0CLR);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	irq_set_chip_handler_name_locked(d, chip, handler, name);
+
+	wmb();
+
+	return ret;
+}
+
+/******************************************************************************/
+
+/*
+ * au1300_gpic_chgcfg - change PIN configuration.
+ * @gpio:	pin to change (0-based GPIO number from datasheet).
+ * @clr:	clear all bits set in 'clr'.
+ * @set:	set these bits.
+ *
+ * modifies a pins' configuration register, bits set in @clr will
+ * be cleared in the register, bits in @set will be set.
+ */
+static inline void au1300_gpic_chgcfg(unsigned int gpio,
+				      unsigned long clr,
+				      unsigned long set)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long l;
+
+	r += gpio * 4;	/* offset into pin config array */
+	l = __raw_readl(r + AU1300_GPIC_PINCFG);
+	l &= ~clr;
+	l |= set;
+	__raw_writel(l, r + AU1300_GPIC_PINCFG);
+	wmb();
+}
+
+/*
+ * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl).
+ * @pin:	pin (0-based GPIO number from datasheet).
+ *
+ * Assigns a GPIO pin to the GPIO controller, so its level can either
+ * be read or set through the generic GPIO functions.
+ * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1).
+ * REVISIT: is this function really necessary?
+ */
+void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio)
+{
+	au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE);
+}
+EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio);
+
+/*
+ * au1300_pinfunc_to_dev - assign a pin to the device function.
+ * @pin:	pin (0-based GPIO number from datasheet).
+ *
+ * Assigns a GPIO pin to its associated device function; the pin will be
+ * driven by the device and not through GPIO functions.
+ */
+void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit;
+
+	r += GPIC_GPIO_BANKOFF(gpio);
+	bit = GPIC_GPIO_TO_BIT(gpio);
+	__raw_writel(bit, r + AU1300_GPIC_DEVSEL);
+	wmb();
+}
+EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev);
+
+/*
+ * au1300_set_irq_priority -  set internal priority of IRQ.
+ * @irq:	irq to set priority (linux irq number).
+ * @p:		priority (0 = highest, 3 = lowest).
+ */
+void au1300_set_irq_priority(unsigned int irq, int p)
+{
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p));
+}
+EXPORT_SYMBOL_GPL(au1300_set_irq_priority);
+
+/*
+ * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers.
+ * @dchan:	dbdma trigger select (0, 1).
+ * @gpio:	pin to assign as trigger.
+ *
+ * DBDMA controller has 2 external trigger sources; this function
+ * assigns a GPIO to the selected trigger.
+ */
+void au1300_set_dbdma_gpio(int dchan, unsigned int gpio)
+{
+	unsigned long r;
+
+	if ((dchan >= 0) && (dchan <= 1)) {
+		r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
+		r &= ~(0xff << (8 * dchan));
+		r |= (gpio & 0x7f) << (8 * dchan);
+		__raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
+		wmb();
+	}
+}
+
+static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow)
+{
+	au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE,
+			   allow ? GPIC_CFG_IDLEWAKE : 0);
+}
+
+static void au1300_gpic_mask(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IDIS);
+	wmb();
+
+	gpic_pin_set_idlewake(irq, 0);
+}
+
+static void au1300_gpic_unmask(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+
+	gpic_pin_set_idlewake(irq, 1);
+
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IEN);
+	wmb();
+}
+
+static void au1300_gpic_maskack(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
+	__raw_writel(bit, r + AU1300_GPIC_IDIS);	/* mask */
+	wmb();
+
+	gpic_pin_set_idlewake(irq, 0);
+}
+
+static void au1300_gpic_ack(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
+	wmb();
+}
+
+static struct irq_chip au1300_gpic = {
+	.name		= "GPIOINT",
+	.irq_ack	= au1300_gpic_ack,
+	.irq_mask	= au1300_gpic_mask,
+	.irq_mask_ack	= au1300_gpic_maskack,
+	.irq_unmask	= au1300_gpic_unmask,
+	.irq_set_type	= au1300_gpic_settype,
+};
+
+static int au1300_gpic_settype(struct irq_data *d, unsigned int type)
+{
+	unsigned long s;
+	unsigned char *name = NULL;
+	irq_flow_handler_t hdl = NULL;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		s = GPIC_CFG_IC_LEVEL_HIGH;
+		name = "high";
+		hdl = handle_level_irq;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		s = GPIC_CFG_IC_LEVEL_LOW;
+		name = "low";
+		hdl = handle_level_irq;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		s = GPIC_CFG_IC_EDGE_RISE;
+		name = "posedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		s = GPIC_CFG_IC_EDGE_FALL;
+		name = "negedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		s = GPIC_CFG_IC_EDGE_BOTH;
+		name = "bothedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_NONE:
+		s = GPIC_CFG_IC_OFF;
+		name = "disabled";
+		hdl = handle_level_irq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	irq_set_chip_handler_name_locked(d, &au1300_gpic, hdl, name);
+
+	au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s);
+
+	return 0;
+}
+
+/******************************************************************************/
+
+static inline void ic_init(void __iomem *base)
+{
+	/* initialize interrupt controller to a safe state */
+	__raw_writel(0xffffffff, base + IC_CFG0CLR);
+	__raw_writel(0xffffffff, base + IC_CFG1CLR);
+	__raw_writel(0xffffffff, base + IC_CFG2CLR);
+	__raw_writel(0xffffffff, base + IC_MASKCLR);
+	__raw_writel(0xffffffff, base + IC_ASSIGNCLR);
+	__raw_writel(0xffffffff, base + IC_WAKECLR);
+	__raw_writel(0xffffffff, base + IC_SRCSET);
+	__raw_writel(0xffffffff, base + IC_FALLINGCLR);
+	__raw_writel(0xffffffff, base + IC_RISINGCLR);
+	__raw_writel(0x00000000, base + IC_TESTBIT);
+	wmb();
+}
+
+static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6];
+
+static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
+{
+	d[0] = __raw_readl(base + IC_CFG0RD);
+	d[1] = __raw_readl(base + IC_CFG1RD);
+	d[2] = __raw_readl(base + IC_CFG2RD);
+	d[3] = __raw_readl(base + IC_SRCRD);
+	d[4] = __raw_readl(base + IC_ASSIGNRD);
+	d[5] = __raw_readl(base + IC_WAKERD);
+	d[6] = __raw_readl(base + IC_MASKRD);
+	ic_init(base);		/* shut it up too while at it */
+}
+
+static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
+{
+	ic_init(base);
+
+	__raw_writel(d[0], base + IC_CFG0SET);
+	__raw_writel(d[1], base + IC_CFG1SET);
+	__raw_writel(d[2], base + IC_CFG2SET);
+	__raw_writel(d[3], base + IC_SRCSET);
+	__raw_writel(d[4], base + IC_ASSIGNSET);
+	__raw_writel(d[5], base + IC_WAKESET);
+	wmb();
+
+	__raw_writel(d[6], base + IC_MASKSET);
+	wmb();
+}
+
+static int alchemy_ic_suspend(void)
+{
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			       alchemy_gpic_pmdata);
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			       &alchemy_gpic_pmdata[7]);
+	return 0;
+}
+
+static void alchemy_ic_resume(void)
+{
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			      &alchemy_gpic_pmdata[7]);
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			      alchemy_gpic_pmdata);
+}
+
+static int alchemy_gpic_suspend(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	int i;
+
+	/* save 4 interrupt mask status registers */
+	alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0);
+	alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4);
+	alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8);
+	alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc);
+
+	/* save misc register(s) */
+	alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL);
+
+	/* molto silenzioso */
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
+	wmb();
+
+	/* save pin/int-type configuration */
+	base += AU1300_GPIC_PINCFG;
+	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
+		alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2));
+
+	wmb();
+
+	return 0;
+}
+
+static void alchemy_gpic_resume(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	int i;
+
+	/* disable all first */
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
+	wmb();
+
+	/* restore pin/int-type configurations */
+	base += AU1300_GPIC_PINCFG;
+	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
+		__raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2));
+	wmb();
+
+	/* restore misc register(s) */
+	base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	__raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL);
+	wmb();
+
+	/* finally restore masks */
+	__raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0);
+	__raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4);
+	__raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8);
+	__raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc);
+	wmb();
+}
+
+static struct syscore_ops alchemy_ic_pmops = {
+	.suspend	= alchemy_ic_suspend,
+	.resume		= alchemy_ic_resume,
+};
+
+static struct syscore_ops alchemy_gpic_pmops = {
+	.suspend	= alchemy_gpic_suspend,
+	.resume		= alchemy_gpic_resume,
+};
+
+/******************************************************************************/
+
+/* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */
+#define DISP(name, base, addr)						      \
+static void au1000_##name##_dispatch(struct irq_desc *d)		      \
+{									      \
+	unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr));	      \
+	if (likely(r))							      \
+		generic_handle_irq(base + __ffs(r));			      \
+	else								      \
+		spurious_interrupt();					      \
+}
+
+DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT)
+DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT)
+DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT)
+DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT)
+
+static void alchemy_gpic_dispatch(struct irq_desc *d)
+{
+	int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC);
+	generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i);
+}
+
+/******************************************************************************/
+
+static void __init au1000_init_irq(struct alchemy_irqmap *map)
+{
+	unsigned int bit, irq_nr;
+	void __iomem *base;
+
+	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
+	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
+	register_syscore_ops(&alchemy_ic_pmops);
+	mips_cpu_irq_init();
+
+	/* register all 64 possible IC0+IC1 irq sources as type "none".
+	 * Use set_irq_type() to set edge/level behaviour at runtime.
+	 */
+	for (irq_nr = AU1000_INTC0_INT_BASE;
+	     (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++)
+		au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
+
+	for (irq_nr = AU1000_INTC1_INT_BASE;
+	     (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++)
+		au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
+
+	/*
+	 * Initialize IC0, which is fixed per processor.
+	 */
+	while (map->irq != -1) {
+		irq_nr = map->irq;
+
+		if (irq_nr >= AU1000_INTC1_INT_BASE) {
+			bit = irq_nr - AU1000_INTC1_INT_BASE;
+			base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+		} else {
+			bit = irq_nr - AU1000_INTC0_INT_BASE;
+			base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+		}
+		if (map->prio == 0)
+			__raw_writel(1 << bit, base + IC_ASSIGNSET);
+
+		au1x_ic_settype(irq_get_irq_data(irq_nr), map->type);
+		++map;
+	}
+
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch);
+}
+
+static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints)
+{
+	int i;
+	void __iomem *bank_base;
+
+	register_syscore_ops(&alchemy_gpic_pmops);
+	mips_cpu_irq_init();
+
+	/* disable & ack all possible interrupt sources */
+	for (i = 0; i < 4; i++) {
+		bank_base = AU1300_GPIC_ADDR + (i * 4);
+		__raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS);
+		wmb();
+		__raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND);
+		wmb();
+	}
+
+	/* register an irq_chip for them, with 2nd highest priority */
+	for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) {
+		au1300_set_irq_priority(i, 1);
+		au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+	}
+
+	/* setup known on-chip sources */
+	while ((i = dints->irq) != -1) {
+		au1300_gpic_settype(irq_get_irq_data(i), dints->type);
+		au1300_set_irq_priority(i, dints->prio);
+
+		if (dints->internal)
+			au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE);
+
+		dints++;
+	}
+
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch);
+}
+
+/******************************************************************************/
+
+void __init arch_init_irq(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		au1000_init_irq(au1000_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1500:
+		au1000_init_irq(au1500_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1100:
+		au1000_init_irq(au1100_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_init_irq(au1550_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1000_init_irq(au1200_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1300:
+		alchemy_gpic_init_irq(au1300_irqmap);
+		break;
+	default:
+		pr_err("unknown Alchemy IRQ core\n");
+		break;
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned long r = (read_c0_status() & read_c0_cause()) >> 8;
+	do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff));
+}
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
new file mode 100644
index 0000000000..d4ab34b3b4
--- /dev/null
+++ b/arch/mips/alchemy/common/platform.c
@@ -0,0 +1,464 @@
+/*
+ * Platform device support for Au1x00 SoCs.
+ *
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * (C) Copyright Embedded Alley Solutions, Inc 2005
+ * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
+
+#include <prom.h>
+
+static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
+			    unsigned int old_state)
+{
+#ifdef CONFIG_SERIAL_8250
+	switch (state) {
+	case 0:
+		alchemy_uart_enable(CPHYSADDR(port->membase));
+		serial8250_do_pm(port, state, old_state);
+		break;
+	case 3:		/* power off */
+		serial8250_do_pm(port, state, old_state);
+		alchemy_uart_disable(CPHYSADDR(port->membase));
+		break;
+	default:
+		serial8250_do_pm(port, state, old_state);
+		break;
+	}
+#endif
+}
+
+#define PORT(_base, _irq)					\
+	{							\
+		.mapbase	= _base,			\
+		.mapsize	= 0x1000,			\
+		.irq		= _irq,				\
+		.regshift	= 2,				\
+		.flags		= UPF_SKIP_TEST | UPF_IOREMAP | \
+				  UPF_FIXED_TYPE,		\
+		.type		= PORT_16550A,			\
+		.pm		= alchemy_8250_pm,		\
+	}
+
+static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
+		PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1100] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1200] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
+	},
+	[ALCHEMY_CPU_AU1300] = {
+		PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT),
+		PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT),
+		PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT),
+		PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT),
+	},
+};
+
+static struct platform_device au1xx0_uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_AU1X00,
+};
+
+static void __init alchemy_setup_uarts(int ctype)
+{
+	long uartclk;
+	int s = sizeof(struct plat_serial8250_port);
+	int c = alchemy_get_uarts(ctype);
+	struct plat_serial8250_port *ports;
+	struct clk *clk = clk_get(NULL, ALCHEMY_PERIPH_CLK);
+
+	if (IS_ERR(clk))
+		return;
+	if (clk_prepare_enable(clk)) {
+		clk_put(clk);
+		return;
+	}
+	uartclk = clk_get_rate(clk);
+	clk_put(clk);
+
+	ports = kcalloc(s, (c + 1), GFP_KERNEL);
+	if (!ports) {
+		printk(KERN_INFO "Alchemy: no memory for UART data\n");
+		return;
+	}
+	memcpy(ports, au1x00_uart_data[ctype], s * c);
+	au1xx0_uart_device.dev.platform_data = ports;
+
+	/* Fill up uartclk. */
+	for (s = 0; s < c; s++) {
+		ports[s].uartclk = uartclk;
+		if (au_platform_setup(&ports[s]) < 0) {
+			kfree(ports);
+			printk(KERN_INFO "Alchemy: missing support for UARTs\n");
+			return;
+		}
+	}
+	if (platform_device_register(&au1xx0_uart_device))
+		printk(KERN_INFO "Alchemy: failed to register UARTs\n");
+}
+
+
+static u64 alchemy_all_dmamask = DMA_BIT_MASK(32);
+
+/* Power on callback for the ehci platform driver */
+static int alchemy_ehci_power_on(struct platform_device *pdev)
+{
+	return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
+}
+
+/* Power off/suspend callback for the ehci platform driver */
+static void alchemy_ehci_power_off(struct platform_device *pdev)
+{
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
+}
+
+static struct usb_ehci_pdata alchemy_ehci_pdata = {
+	.no_io_watchdog = 1,
+	.power_on	= alchemy_ehci_power_on,
+	.power_off	= alchemy_ehci_power_off,
+	.power_suspend	= alchemy_ehci_power_off,
+};
+
+/* Power on callback for the ohci platform driver */
+static int alchemy_ohci_power_on(struct platform_device *pdev)
+{
+	int unit;
+
+	unit = (pdev->id == 1) ?
+		ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+	return alchemy_usb_control(unit, 1);
+}
+
+/* Power off/suspend callback for the ohci platform driver */
+static void alchemy_ohci_power_off(struct platform_device *pdev)
+{
+	int unit;
+
+	unit = (pdev->id == 1) ?
+		ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+	alchemy_usb_control(unit, 0);
+}
+
+static struct usb_ohci_pdata alchemy_ohci_pdata = {
+	.power_on		= alchemy_ohci_power_on,
+	.power_off		= alchemy_ohci_power_off,
+	.power_suspend		= alchemy_ohci_power_off,
+};
+
+static unsigned long alchemy_ohci_data[][2] __initdata = {
+	[ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT },
+};
+
+static unsigned long alchemy_ehci_data[][2] __initdata = {
+	[ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT },
+};
+
+static int __init _new_usbres(struct resource **r, struct platform_device **d)
+{
+	*r = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
+	if (!*r)
+		return -ENOMEM;
+	*d = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+	if (!*d) {
+		kfree(*r);
+		return -ENOMEM;
+	}
+
+	(*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	(*d)->num_resources = 2;
+	(*d)->resource = *r;
+
+	return 0;
+}
+
+static void __init alchemy_setup_usb(int ctype)
+{
+	struct resource *res;
+	struct platform_device *pdev;
+
+	/* setup OHCI0.  Every variant has one */
+	if (_new_usbres(&res, &pdev))
+		return;
+
+	res[0].start = alchemy_ohci_data[ctype][0];
+	res[0].end = res[0].start + 0x100 - 1;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = alchemy_ohci_data[ctype][1];
+	res[1].end = res[1].start;
+	res[1].flags = IORESOURCE_IRQ;
+	pdev->name = "ohci-platform";
+	pdev->id = 0;
+	pdev->dev.dma_mask = &alchemy_all_dmamask;
+	pdev->dev.platform_data = &alchemy_ohci_pdata;
+
+	if (platform_device_register(pdev))
+		printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
+
+
+	/* setup EHCI0: Au1200/Au1300 */
+	if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) {
+		if (_new_usbres(&res, &pdev))
+			return;
+
+		res[0].start = alchemy_ehci_data[ctype][0];
+		res[0].end = res[0].start + 0x100 - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = alchemy_ehci_data[ctype][1];
+		res[1].end = res[1].start;
+		res[1].flags = IORESOURCE_IRQ;
+		pdev->name = "ehci-platform";
+		pdev->id = 0;
+		pdev->dev.dma_mask = &alchemy_all_dmamask;
+		pdev->dev.platform_data = &alchemy_ehci_pdata;
+
+		if (platform_device_register(pdev))
+			printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
+	}
+
+	/* Au1300: OHCI1 */
+	if (ctype == ALCHEMY_CPU_AU1300) {
+		if (_new_usbres(&res, &pdev))
+			return;
+
+		res[0].start = AU1300_USB_OHCI1_PHYS_ADDR;
+		res[0].end = res[0].start + 0x100 - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = AU1300_USB_INT;
+		res[1].end = res[1].start;
+		res[1].flags = IORESOURCE_IRQ;
+		pdev->name = "ohci-platform";
+		pdev->id = 1;
+		pdev->dev.dma_mask = &alchemy_all_dmamask;
+		pdev->dev.platform_data = &alchemy_ohci_pdata;
+
+		if (platform_device_register(pdev))
+			printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
+	}
+}
+
+/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES_COUNT	4	/* MAC regs, MAC en, MAC INT, MACDMA regs */
+#define MAC_RES(_base, _enable, _irq, _macdma)		\
+	{						\
+		.start	= _base,			\
+		.end	= _base + 0xffff,		\
+		.flags	= IORESOURCE_MEM,		\
+	},						\
+	{						\
+		.start	= _enable,			\
+		.end	= _enable + 0x3,		\
+		.flags	= IORESOURCE_MEM,		\
+	},						\
+	{						\
+		.start	= _irq,				\
+		.end	= _irq,				\
+		.flags	= IORESOURCE_IRQ		\
+	},						\
+	{						\
+		.start	= _macdma,			\
+		.end	= _macdma + 0x1ff,		\
+		.flags	= IORESOURCE_MEM,		\
+	}
+
+static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1000_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		MAC_RES(AU1500_MAC0_PHYS_ADDR,
+			AU1500_MACEN_PHYS_ADDR,
+			AU1500_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1100] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1100_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1550_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+};
+
+static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
+	.phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth0_device = {
+	.name		= "au1000-eth",
+	.id		= 0,
+	.num_resources	= MAC_RES_COUNT,
+	.dev = {
+		.dma_mask               = &alchemy_all_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data          = &au1xxx_eth0_platform_data,
+	},
+};
+
+static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		MAC_RES(AU1000_MAC1_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR + 4,
+			AU1000_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		MAC_RES(AU1500_MAC1_PHYS_ADDR,
+			AU1500_MACEN_PHYS_ADDR + 4,
+			AU1500_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		MAC_RES(AU1000_MAC1_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR + 4,
+			AU1550_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
+	},
+};
+
+static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
+	.phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth1_device = {
+	.name		= "au1000-eth",
+	.id		= 1,
+	.num_resources	= MAC_RES_COUNT,
+	.dev = {
+		.dma_mask               = &alchemy_all_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data          = &au1xxx_eth1_platform_data,
+	},
+};
+
+void __init au1xxx_override_eth_cfg(unsigned int port,
+			struct au1000_eth_platform_data *eth_data)
+{
+	if (!eth_data || port > 1)
+		return;
+
+	if (port == 0)
+		memcpy(&au1xxx_eth0_platform_data, eth_data,
+			sizeof(struct au1000_eth_platform_data));
+	else
+		memcpy(&au1xxx_eth1_platform_data, eth_data,
+			sizeof(struct au1000_eth_platform_data));
+}
+
+static void __init alchemy_setup_macs(int ctype)
+{
+	int ret, i;
+	unsigned char ethaddr[6];
+	struct resource *macres;
+
+	/* Handle 1st MAC */
+	if (alchemy_get_macs(ctype) < 1)
+		return;
+
+	macres = kmemdup(au1xxx_eth0_resources[ctype],
+			 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+	if (!macres) {
+		printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
+		return;
+	}
+	au1xxx_eth0_device.resource = macres;
+
+	i = prom_get_ethernet_addr(ethaddr);
+	if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
+		memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+
+	ret = platform_device_register(&au1xxx_eth0_device);
+	if (ret)
+		printk(KERN_INFO "Alchemy: failed to register MAC0\n");
+
+
+	/* Handle 2nd MAC */
+	if (alchemy_get_macs(ctype) < 2)
+		return;
+
+	macres = kmemdup(au1xxx_eth1_resources[ctype],
+			 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+	if (!macres) {
+		printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
+		return;
+	}
+	au1xxx_eth1_device.resource = macres;
+
+	ethaddr[5] += 1;	/* next addr for 2nd MAC */
+	if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
+		memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
+
+	/* Register second MAC if enabled in pinfunc */
+	if (!(alchemy_rdsys(AU1000_SYS_PINFUNC) & SYS_PF_NI2)) {
+		ret = platform_device_register(&au1xxx_eth1_device);
+		if (ret)
+			printk(KERN_INFO "Alchemy: failed to register MAC1\n");
+	}
+}
+
+static int __init au1xxx_platform_init(void)
+{
+	int ctype = alchemy_get_cputype();
+
+	alchemy_setup_uarts(ctype);
+	alchemy_setup_macs(ctype);
+	alchemy_setup_usb(ctype);
+
+	return 0;
+}
+
+arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
new file mode 100644
index 0000000000..303257b697
--- /dev/null
+++ b/arch/mips/alchemy/common/power.c
@@ -0,0 +1,132 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1xx0 Power Management routines.
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  Some of the routines are right out of init/main.c, whose
+ *  copyrights apply here.
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pm.h>
+#include <linux/sysctl.h>
+#include <linux/jiffies.h>
+
+#include <linux/uaccess.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/*
+ * We need to save/restore a bunch of core registers that are
+ * either volatile or reset to some state across a processor sleep.
+ * If reading a register doesn't provide a proper result for a
+ * later restore, we have to provide a function for loading that
+ * register and save a copy.
+ *
+ * We only have to save/restore registers that aren't otherwise
+ * done as part of a driver pm_* function.
+ */
+static unsigned int sleep_sys_clocks[5];
+static unsigned int sleep_sys_pinfunc;
+static unsigned int sleep_static_memctlr[4][3];
+
+
+static void save_core_regs(void)
+{
+	/* Clocks and PLLs. */
+	sleep_sys_clocks[0] = alchemy_rdsys(AU1000_SYS_FREQCTRL0);
+	sleep_sys_clocks[1] = alchemy_rdsys(AU1000_SYS_FREQCTRL1);
+	sleep_sys_clocks[2] = alchemy_rdsys(AU1000_SYS_CLKSRC);
+	sleep_sys_clocks[3] = alchemy_rdsys(AU1000_SYS_CPUPLL);
+	sleep_sys_clocks[4] = alchemy_rdsys(AU1000_SYS_AUXPLL);
+
+	/* pin mux config */
+	sleep_sys_pinfunc = alchemy_rdsys(AU1000_SYS_PINFUNC);
+
+	/* Save the static memory controller configuration. */
+	sleep_static_memctlr[0][0] = alchemy_rdsmem(AU1000_MEM_STCFG0);
+	sleep_static_memctlr[0][1] = alchemy_rdsmem(AU1000_MEM_STTIME0);
+	sleep_static_memctlr[0][2] = alchemy_rdsmem(AU1000_MEM_STADDR0);
+	sleep_static_memctlr[1][0] = alchemy_rdsmem(AU1000_MEM_STCFG1);
+	sleep_static_memctlr[1][1] = alchemy_rdsmem(AU1000_MEM_STTIME1);
+	sleep_static_memctlr[1][2] = alchemy_rdsmem(AU1000_MEM_STADDR1);
+	sleep_static_memctlr[2][0] = alchemy_rdsmem(AU1000_MEM_STCFG2);
+	sleep_static_memctlr[2][1] = alchemy_rdsmem(AU1000_MEM_STTIME2);
+	sleep_static_memctlr[2][2] = alchemy_rdsmem(AU1000_MEM_STADDR2);
+	sleep_static_memctlr[3][0] = alchemy_rdsmem(AU1000_MEM_STCFG3);
+	sleep_static_memctlr[3][1] = alchemy_rdsmem(AU1000_MEM_STTIME3);
+	sleep_static_memctlr[3][2] = alchemy_rdsmem(AU1000_MEM_STADDR3);
+}
+
+static void restore_core_regs(void)
+{
+	/* restore clock configuration.  Writing CPUPLL last will
+	 * stall a bit and stabilize other clocks (unless this is
+	 * one of those Au1000 with a write-only PLL, where we dont
+	 * have a valid value)
+	 */
+	alchemy_wrsys(sleep_sys_clocks[0], AU1000_SYS_FREQCTRL0);
+	alchemy_wrsys(sleep_sys_clocks[1], AU1000_SYS_FREQCTRL1);
+	alchemy_wrsys(sleep_sys_clocks[2], AU1000_SYS_CLKSRC);
+	alchemy_wrsys(sleep_sys_clocks[4], AU1000_SYS_AUXPLL);
+	if (!au1xxx_cpu_has_pll_wo())
+		alchemy_wrsys(sleep_sys_clocks[3], AU1000_SYS_CPUPLL);
+
+	alchemy_wrsys(sleep_sys_pinfunc, AU1000_SYS_PINFUNC);
+
+	/* Restore the static memory controller configuration. */
+	alchemy_wrsmem(sleep_static_memctlr[0][0], AU1000_MEM_STCFG0);
+	alchemy_wrsmem(sleep_static_memctlr[0][1], AU1000_MEM_STTIME0);
+	alchemy_wrsmem(sleep_static_memctlr[0][2], AU1000_MEM_STADDR0);
+	alchemy_wrsmem(sleep_static_memctlr[1][0], AU1000_MEM_STCFG1);
+	alchemy_wrsmem(sleep_static_memctlr[1][1], AU1000_MEM_STTIME1);
+	alchemy_wrsmem(sleep_static_memctlr[1][2], AU1000_MEM_STADDR1);
+	alchemy_wrsmem(sleep_static_memctlr[2][0], AU1000_MEM_STCFG2);
+	alchemy_wrsmem(sleep_static_memctlr[2][1], AU1000_MEM_STTIME2);
+	alchemy_wrsmem(sleep_static_memctlr[2][2], AU1000_MEM_STADDR2);
+	alchemy_wrsmem(sleep_static_memctlr[3][0], AU1000_MEM_STCFG3);
+	alchemy_wrsmem(sleep_static_memctlr[3][1], AU1000_MEM_STTIME3);
+	alchemy_wrsmem(sleep_static_memctlr[3][2], AU1000_MEM_STADDR3);
+}
+
+void au_sleep(void)
+{
+	save_core_regs();
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		alchemy_sleep_au1000();
+		break;
+	case ALCHEMY_CPU_AU1550:
+	case ALCHEMY_CPU_AU1200:
+		alchemy_sleep_au1550();
+		break;
+	case ALCHEMY_CPU_AU1300:
+		alchemy_sleep_au1300();
+		break;
+	}
+
+	restore_core_regs();
+}
diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c
new file mode 100644
index 0000000000..b13d8adf3b
--- /dev/null
+++ b/arch/mips/alchemy/common/prom.c
@@ -0,0 +1,145 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *    PROM library initialisation code, supports YAMON and U-Boot.
+ *
+ * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file was derived from Carsten Langgaard's
+ * arch/mips/mips-boards/xx files.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/sizes.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+int prom_argc;
+char **prom_argv;
+char **prom_envp;
+
+void __init prom_init_cmdline(void)
+{
+	int i;
+
+	for (i = 1; i < prom_argc; i++) {
+		strlcat(arcs_cmdline, prom_argv[i], COMMAND_LINE_SIZE);
+		if (i < (prom_argc - 1))
+			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
+	}
+}
+
+char *prom_getenv(char *envname)
+{
+	/*
+	 * Return a pointer to the given environment variable.
+	 * YAMON uses "name", "value" pairs, while U-Boot uses "name=value".
+	 */
+
+	char **env = prom_envp;
+	int i = strlen(envname);
+	int yamon = (*env && strchr(*env, '=') == NULL);
+
+	while (*env) {
+		if (yamon) {
+			if (strcmp(envname, *env++) == 0)
+				return *env;
+		} else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
+			return *env + i + 1;
+		env++;
+	}
+
+	return NULL;
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = (int)fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
+		memsize = SZ_64M; /* minimum memsize is 64MB RAM */
+
+	memblock_add(0, memsize);
+}
+
+static inline unsigned char str2hexnum(unsigned char c)
+{
+	if (c >= '0' && c <= '9')
+		return c - '0';
+	if (c >= 'a' && c <= 'f')
+		return c - 'a' + 10;
+	if (c >= 'A' && c <= 'F')
+		return c - 'A' + 10;
+
+	return 0; /* foo */
+}
+
+static inline void str2eaddr(unsigned char *ea, unsigned char *str)
+{
+	int i;
+
+	for (i = 0; i < 6; i++) {
+		unsigned char num;
+
+		if ((*str == '.') || (*str == ':'))
+			str++;
+		num  = str2hexnum(*str++) << 4;
+		num |= str2hexnum(*str++);
+		ea[i] = num;
+	}
+}
+
+int __init prom_get_ethernet_addr(char *ethernet_addr)
+{
+	char *ethaddr_str;
+
+	/* Check the environment variables first */
+	ethaddr_str = prom_getenv("ethaddr");
+	if (!ethaddr_str) {
+		/* Check command line */
+		ethaddr_str = strstr(arcs_cmdline, "ethaddr=");
+		if (!ethaddr_str)
+			return -1;
+
+		ethaddr_str += strlen("ethaddr=");
+	}
+
+	str2eaddr(ethernet_addr, ethaddr_str);
+
+	return 0;
+}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
new file mode 100644
index 0000000000..2388d68786
--- /dev/null
+++ b/arch/mips/alchemy/common/setup.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2000, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com
+ *
+ * Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/dma-map-ops.h> /* for dma_default_coherent */
+
+#include <asm/mipsregs.h>
+
+#include <au1000.h>
+
+extern void __init board_setup(void);
+extern void __init alchemy_set_lpj(void);
+
+static bool alchemy_dma_coherent(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		return false;
+	case ALCHEMY_CPU_AU1200:
+		/* Au1200 AB USB does not support coherent memory */
+		if ((read_c0_prid() & PRID_REV_MASK) == 0)
+			return false;
+		return true;
+	default:
+		return true;
+	}
+}
+
+void __init plat_mem_setup(void)
+{
+	alchemy_set_lpj();
+
+	if (au1xxx_cpu_needs_config_od())
+		/* Various early Au1xx0 errata corrected by this */
+		set_c0_config(1 << 19); /* Set Config[OD] */
+	else
+		/* Clear to obtain best system bus performance */
+		clear_c0_config(1 << 19); /* Clear Config[OD] */
+
+	dma_default_coherent = alchemy_dma_coherent();
+
+	board_setup();	/* board specific setup */
+
+	/* IO/MEM resources. */
+	set_io_port_base(0);
+	ioport_resource.start = IOPORT_RESOURCE_START;
+	ioport_resource.end = IOPORT_RESOURCE_END;
+	iomem_resource.start = IOMEM_RESOURCE_START;
+	iomem_resource.end = IOMEM_RESOURCE_END;
+}
+
+#ifdef CONFIG_MIPS_FIXUP_BIGPHYS_ADDR
+/* This routine should be valid for all Au1x based boards */
+phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
+{
+	unsigned long start = ALCHEMY_PCI_MEMWIN_START;
+	unsigned long end = ALCHEMY_PCI_MEMWIN_END;
+
+	/* Don't fixup 36-bit addresses */
+	if ((phys_addr >> 32) != 0)
+		return phys_addr;
+
+	/* Check for PCI memory window */
+	if (phys_addr >= start && (phys_addr + size - 1) <= end)
+		return (phys_addr_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr);
+
+	/* default nop */
+	return phys_addr;
+}
+
+int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long vaddr,
+		unsigned long pfn, unsigned long size, pgprot_t prot)
+{
+	phys_addr_t phys_addr = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+
+	return remap_pfn_range(vma, vaddr, phys_addr >> PAGE_SHIFT, size, prot);
+}
+EXPORT_SYMBOL(io_remap_pfn_range);
+#endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
new file mode 100644
index 0000000000..13586d2243
--- /dev/null
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -0,0 +1,266 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2002 Embedded Edge, LLC
+ * Author: dan@embeddededge.com
+ *
+ * Sleep helper for Au1xxx sleep mode.
+ */
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+	.extern __flush_cache_all
+
+	.text
+	.set noreorder
+	.set noat
+	.align	5
+
+
+/* preparatory stuff */
+.macro	SETUP_SLEEP
+	subu	sp, PT_SIZE
+	sw	$1, PT_R1(sp)
+	sw	$2, PT_R2(sp)
+	sw	$3, PT_R3(sp)
+	sw	$4, PT_R4(sp)
+	sw	$5, PT_R5(sp)
+	sw	$6, PT_R6(sp)
+	sw	$7, PT_R7(sp)
+	sw	$16, PT_R16(sp)
+	sw	$17, PT_R17(sp)
+	sw	$18, PT_R18(sp)
+	sw	$19, PT_R19(sp)
+	sw	$20, PT_R20(sp)
+	sw	$21, PT_R21(sp)
+	sw	$22, PT_R22(sp)
+	sw	$23, PT_R23(sp)
+	sw	$26, PT_R26(sp)
+	sw	$27, PT_R27(sp)
+	sw	$28, PT_R28(sp)
+	sw	$30, PT_R30(sp)
+	sw	$31, PT_R31(sp)
+	mfc0	k0, CP0_STATUS
+	sw	k0, 0x20(sp)
+	mfc0	k0, CP0_CONTEXT
+	sw	k0, 0x1c(sp)
+	mfc0	k0, CP0_PAGEMASK
+	sw	k0, 0x18(sp)
+	mfc0	k0, CP0_CONFIG
+	sw	k0, 0x14(sp)
+
+	/* flush caches to make sure context is in memory */
+	la	t1, __flush_cache_all
+	lw	t0, 0(t1)
+	jalr	t0
+	 nop
+
+	/* Now set up the scratch registers so the boot rom will
+	 * return to this point upon wakeup.
+	 * sys_scratch0 : SP
+	 * sys_scratch1 : RA
+	 */
+	lui	t3, 0xb190		/* sys_xxx */
+	sw	sp, 0x0018(t3)
+	la	k0, alchemy_sleep_wakeup	/* resume path */
+	sw	k0, 0x001c(t3)
+.endm
+
+.macro	DO_SLEEP
+	/* put power supply and processor to sleep */
+	sw	zero, 0x0078(t3)	/* sys_slppwr */
+	sync
+	sw	zero, 0x007c(t3)	/* sys_sleep */
+	sync
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+.endm
+
+/* sleep code for Au1000/Au1100/Au1500 memory controller type */
+LEAF(alchemy_sleep_au1000)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 1f
+	.set	arch=r4000
+	cache	0x14, 0(t0)
+	cache	0x14, 32(t0)
+	cache	0x14, 64(t0)
+	cache	0x14, 96(t0)
+	.set	mips0
+
+1:	lui	a0, 0xb400		/* mem_xxx */
+	sw	zero, 0x001c(a0)	/* Precharge */
+	sync
+	sw	zero, 0x0020(a0)	/* Auto Refresh */
+	sync
+	sw	zero, 0x0030(a0)	/* Sleep */
+	sync
+
+	DO_SLEEP
+
+END(alchemy_sleep_au1000)
+
+/* sleep code for Au1550/Au1200 memory controller type */
+LEAF(alchemy_sleep_au1550)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 1f
+	.set	arch=r4000
+	cache	0x14, 0(t0)
+	cache	0x14, 32(t0)
+	cache	0x14, 64(t0)
+	cache	0x14, 96(t0)
+	.set	mips0
+
+1:	lui	a0, 0xb400		/* mem_xxx */
+	sw	zero, 0x08c0(a0)	/* Precharge */
+	sync
+	sw	zero, 0x08d0(a0)	/* Self Refresh */
+	sync
+
+	/* wait for sdram to enter self-refresh mode */
+	lui	t0, 0x0100
+2:	lw	t1, 0x0850(a0)		/* mem_sdstat */
+	and	t2, t1, t0
+	beq	t2, zero, 2b
+	 nop
+
+	/* disable SDRAM clocks */
+	lui	t0, 0xcfff
+	ori	t0, t0, 0xffff
+	lw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	and	t1, t0, t1		/* clear CE[1:0] */
+	sw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	sync
+
+	DO_SLEEP
+
+END(alchemy_sleep_au1550)
+
+/* sleepcode for Au1300 memory controller type */
+LEAF(alchemy_sleep_au1300)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 2f
+	la	t1, 4f
+	subu	t2, t1, t0
+
+	.set	arch=r4000
+
+1:	cache	0x14, 0(t0)
+	subu	t2, t2, 32
+	bgez	t2, 1b
+	 addu	t0, t0, 32
+
+	.set	mips0
+
+2:	lui	a0, 0xb400		/* mem_xxx */
+
+	/* disable all ports in mem_sdportcfga */
+	sw	zero, 0x868(a0)		/* mem_sdportcfga */
+	sync
+
+	/* disable ODT */
+	li	t0, 0x03010000
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sync
+
+	/* precharge */
+	li	t0, 0x23000400
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sync
+
+	/* auto refresh */
+	sw	zero, 0x08c8(a0)	/* mem_sdautoref */
+	sync
+
+	/* block access to the DDR */
+	lw	t0, 0x0848(a0)		/* mem_sdconfigb */
+	li	t1, (1 << 7 | 0x3F)
+	or	t0, t0, t1
+	sw	t0, 0x0848(a0)		/* mem_sdconfigb */
+	sync
+
+	/* issue the Self Refresh command */
+	li	t0, 0x10000000
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sync
+
+	/* wait for sdram to enter self-refresh mode */
+	lui	t0, 0x0300
+3:	lw	t1, 0x0850(a0)		/* mem_sdstat */
+	and	t2, t1, t0
+	bne	t2, t0, 3b
+	 nop
+
+	/* disable SDRAM clocks */
+	li	t0, ~(3<<28)
+	lw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	and	t1, t1, t0		/* clear CE[1:0] */
+	sw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	sync
+
+	DO_SLEEP
+4:
+
+END(alchemy_sleep_au1300)
+
+
+	/* This is where we return upon wakeup.
+	 * Reload all of the registers and return.
+	 */
+LEAF(alchemy_sleep_wakeup)
+	lw	k0, 0x20(sp)
+	mtc0	k0, CP0_STATUS
+	lw	k0, 0x1c(sp)
+	mtc0	k0, CP0_CONTEXT
+	lw	k0, 0x18(sp)
+	mtc0	k0, CP0_PAGEMASK
+	lw	k0, 0x14(sp)
+	mtc0	k0, CP0_CONFIG
+
+	/* We need to catch the early Alchemy SOCs with
+	 * the write-only Config[OD] bit and set it back to one...
+	 */
+	jal	au1x00_fixup_config_od
+	 nop
+	lw	$1, PT_R1(sp)
+	lw	$2, PT_R2(sp)
+	lw	$3, PT_R3(sp)
+	lw	$4, PT_R4(sp)
+	lw	$5, PT_R5(sp)
+	lw	$6, PT_R6(sp)
+	lw	$7, PT_R7(sp)
+	lw	$16, PT_R16(sp)
+	lw	$17, PT_R17(sp)
+	lw	$18, PT_R18(sp)
+	lw	$19, PT_R19(sp)
+	lw	$20, PT_R20(sp)
+	lw	$21, PT_R21(sp)
+	lw	$22, PT_R22(sp)
+	lw	$23, PT_R23(sp)
+	lw	$26, PT_R26(sp)
+	lw	$27, PT_R27(sp)
+	lw	$28, PT_R28(sp)
+	lw	$30, PT_R30(sp)
+	lw	$31, PT_R31(sp)
+	jr	ra
+	 addiu	sp, PT_SIZE
+END(alchemy_sleep_wakeup)
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
new file mode 100644
index 0000000000..d794ffb674
--- /dev/null
+++ b/arch/mips/alchemy/common/time.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com>
+ *
+ * Previous incarnations were:
+ * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
+ * Copied and modified Carsten Langgaard's time.c
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ * ########################################################################
+ *
+ * Clocksource/event using the 32.768kHz-clocked Counter1 ('RTC' in the
+ * databooks).  Firmware/Board init code must enable the counters in the
+ * counter control register, otherwise the CP0 counter clocksource/event
+ * will be installed instead (and use of 'wait' instruction is prohibited).
+ */
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/idle.h>
+#include <asm/processor.h>
+#include <asm/time.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* 32kHz clock enabled and detected */
+#define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
+
+static u64 au1x_counter1_read(struct clocksource *cs)
+{
+	return alchemy_rdsys(AU1000_SYS_RTCREAD);
+}
+
+static struct clocksource au1x_counter1_clocksource = {
+	.name		= "alchemy-counter1",
+	.read		= au1x_counter1_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.rating		= 1500,
+};
+
+static int au1x_rtcmatch2_set_next_event(unsigned long delta,
+					 struct clock_event_device *cd)
+{
+	delta += alchemy_rdsys(AU1000_SYS_RTCREAD);
+	/* wait for register access */
+	while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M21)
+		;
+	alchemy_wrsys(delta, AU1000_SYS_RTCMATCH2);
+
+	return 0;
+}
+
+static irqreturn_t au1x_rtcmatch2_irq(int irq, void *dev_id)
+{
+	struct clock_event_device *cd = dev_id;
+	cd->event_handler(cd);
+	return IRQ_HANDLED;
+}
+
+static struct clock_event_device au1x_rtcmatch2_clockdev = {
+	.name		= "rtcmatch2",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 1500,
+	.set_next_event = au1x_rtcmatch2_set_next_event,
+	.cpumask	= cpu_possible_mask,
+};
+
+static int __init alchemy_time_init(unsigned int m2int)
+{
+	struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
+	unsigned long t;
+
+	au1x_rtcmatch2_clockdev.irq = m2int;
+
+	/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
+	 * has been detected.  If so install the rtcmatch2 clocksource,
+	 * otherwise don't bother.  Note that both bits being set is by
+	 * no means a definite guarantee that the counters actually work
+	 * (the 32S bit seems to be stuck set to 1 once a single clock-
+	 * edge is detected, hence the timeouts).
+	 */
+	if (CNTR_OK != (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & CNTR_OK))
+		goto cntr_err;
+
+	/*
+	 * setup counter 1 (RTC) to tick at full speed
+	 */
+	t = 0xffffff;
+	while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_T1S) && --t)
+		asm volatile ("nop");
+	if (!t)
+		goto cntr_err;
+
+	alchemy_wrsys(0, AU1000_SYS_RTCTRIM);	/* 32.768 kHz */
+
+	t = 0xffffff;
+	while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t)
+		asm volatile ("nop");
+	if (!t)
+		goto cntr_err;
+	alchemy_wrsys(0, AU1000_SYS_RTCWRITE);
+
+	t = 0xffffff;
+	while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t)
+		asm volatile ("nop");
+	if (!t)
+		goto cntr_err;
+
+	/* register counter1 clocksource and event device */
+	clocksource_register_hz(&au1x_counter1_clocksource, 32768);
+
+	cd->shift = 32;
+	cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
+	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
+	cd->max_delta_ticks = 0xffffffff;
+	cd->min_delta_ns = clockevent_delta2ns(9, cd);
+	cd->min_delta_ticks = 9;	/* ~0.28ms */
+	clockevents_register_device(cd);
+	if (request_irq(m2int, au1x_rtcmatch2_irq, IRQF_TIMER, "timer",
+			&au1x_rtcmatch2_clockdev))
+		pr_err("Failed to register timer interrupt\n");
+
+	printk(KERN_INFO "Alchemy clocksource installed\n");
+
+	return 0;
+
+cntr_err:
+	return -1;
+}
+
+static int alchemy_m2inttab[] __initdata = {
+	AU1000_RTC_MATCH2_INT,
+	AU1500_RTC_MATCH2_INT,
+	AU1100_RTC_MATCH2_INT,
+	AU1550_RTC_MATCH2_INT,
+	AU1200_RTC_MATCH2_INT,
+	AU1300_RTC_MATCH2_INT,
+};
+
+void __init plat_time_init(void)
+{
+	int t;
+
+	t = alchemy_get_cputype();
+	if (t == ALCHEMY_CPU_UNKNOWN ||
+	    alchemy_time_init(alchemy_m2inttab[t]))
+		cpu_wait = NULL;	/* wait doesn't work with r4k timer */
+}
diff --git a/arch/mips/alchemy/common/usb.c b/arch/mips/alchemy/common/usb.c
new file mode 100644
index 0000000000..5d618547eb
--- /dev/null
+++ b/arch/mips/alchemy/common/usb.c
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * USB block power/access management abstraction.
+ *
+ * Au1000+: The OHCI block control register is at the far end of the OHCI memory
+ *	    area. Au1550 has OHCI on different base address. No need to handle
+ *	    UDC here.
+ * Au1200:  one register to control access and clocks to O/EHCI, UDC and OTG
+ *	    as well as the PHY for EHCI and UDC.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+#include <asm/cpu.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* control register offsets */
+#define AU1000_OHCICFG	0x7fffc
+#define AU1550_OHCICFG	0x07ffc
+#define AU1200_USBCFG	0x04
+
+/* Au1000 USB block config bits */
+#define USBHEN_RD	(1 << 4)		/* OHCI reset-done indicator */
+#define USBHEN_CE	(1 << 3)		/* OHCI block clock enable */
+#define USBHEN_E	(1 << 2)		/* OHCI block enable */
+#define USBHEN_C	(1 << 1)		/* OHCI block coherency bit */
+#define USBHEN_BE	(1 << 0)		/* OHCI Big-Endian */
+
+/* Au1200 USB config bits */
+#define USBCFG_PFEN	(1 << 31)		/* prefetch enable (undoc) */
+#define USBCFG_RDCOMB	(1 << 30)		/* read combining (undoc) */
+#define USBCFG_UNKNOWN	(5 << 20)		/* unknown, leave this way */
+#define USBCFG_SSD	(1 << 23)		/* serial short detect en */
+#define USBCFG_PPE	(1 << 19)		/* HS PHY PLL */
+#define USBCFG_UCE	(1 << 18)		/* UDC clock enable */
+#define USBCFG_ECE	(1 << 17)		/* EHCI clock enable */
+#define USBCFG_OCE	(1 << 16)		/* OHCI clock enable */
+#define USBCFG_FLA(x)	(((x) & 0x3f) << 8)
+#define USBCFG_UCAM	(1 << 7)		/* coherent access (undoc) */
+#define USBCFG_GME	(1 << 6)		/* OTG mem access */
+#define USBCFG_DBE	(1 << 5)		/* UDC busmaster enable */
+#define USBCFG_DME	(1 << 4)		/* UDC mem enable */
+#define USBCFG_EBE	(1 << 3)		/* EHCI busmaster enable */
+#define USBCFG_EME	(1 << 2)		/* EHCI mem enable */
+#define USBCFG_OBE	(1 << 1)		/* OHCI busmaster enable */
+#define USBCFG_OME	(1 << 0)		/* OHCI mem enable */
+#define USBCFG_INIT_AU1200	(USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
+				 USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
+				 USBCFG_GME | USBCFG_DBE | USBCFG_DME |	       \
+				 USBCFG_EBE | USBCFG_EME | USBCFG_OBE |	       \
+				 USBCFG_OME)
+
+/* Au1300 USB config registers */
+#define USB_DWC_CTRL1		0x00
+#define USB_DWC_CTRL2		0x04
+#define USB_VBUS_TIMER		0x10
+#define USB_SBUS_CTRL		0x14
+#define USB_MSR_ERR		0x18
+#define USB_DWC_CTRL3		0x1C
+#define USB_DWC_CTRL4		0x20
+#define USB_OTG_STATUS		0x28
+#define USB_DWC_CTRL5		0x2C
+#define USB_DWC_CTRL6		0x30
+#define USB_DWC_CTRL7		0x34
+#define USB_PHY_STATUS		0xC0
+#define USB_INT_STATUS		0xC4
+#define USB_INT_ENABLE		0xC8
+
+#define USB_DWC_CTRL1_OTGD	0x04 /* set to DISable OTG */
+#define USB_DWC_CTRL1_HSTRS	0x02 /* set to ENable EHCI */
+#define USB_DWC_CTRL1_DCRS	0x01 /* set to ENable UDC */
+
+#define USB_DWC_CTRL2_PHY1RS	0x04 /* set to enable PHY1 */
+#define USB_DWC_CTRL2_PHY0RS	0x02 /* set to enable PHY0 */
+#define USB_DWC_CTRL2_PHYRS	0x01 /* set to enable PHY */
+
+#define USB_DWC_CTRL3_OHCI1_CKEN	(1 << 19)
+#define USB_DWC_CTRL3_OHCI0_CKEN	(1 << 18)
+#define USB_DWC_CTRL3_EHCI0_CKEN	(1 << 17)
+#define USB_DWC_CTRL3_OTG0_CKEN		(1 << 16)
+
+#define USB_SBUS_CTRL_SBCA		0x04 /* coherent access */
+
+#define USB_INTEN_FORCE			0x20
+#define USB_INTEN_PHY			0x10
+#define USB_INTEN_UDC			0x08
+#define USB_INTEN_EHCI			0x04
+#define USB_INTEN_OHCI1			0x02
+#define USB_INTEN_OHCI0			0x01
+
+static DEFINE_SPINLOCK(alchemy_usb_lock);
+
+static inline void __au1300_usb_phyctl(void __iomem *base, int enable)
+{
+	unsigned long r, s;
+
+	r = __raw_readl(base + USB_DWC_CTRL2);
+	s = __raw_readl(base + USB_DWC_CTRL3);
+
+	s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN |
+		USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN;
+
+	if (enable) {
+		/* simply enable all PHYs */
+		r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
+		     USB_DWC_CTRL2_PHYRS;
+		__raw_writel(r, base + USB_DWC_CTRL2);
+		wmb();
+	} else if (!s) {
+		/* no USB block active, do disable all PHYs */
+		r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
+		       USB_DWC_CTRL2_PHYRS);
+		__raw_writel(r, base + USB_DWC_CTRL2);
+		wmb();
+	}
+}
+
+static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
+{
+	unsigned long r;
+
+	if (enable) {
+		__raw_writel(1, base + USB_DWC_CTRL7);	/* start OHCI clock */
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);	/* enable OHCI block */
+		r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
+			       : USB_DWC_CTRL3_OHCI1_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);	/* power up the PHYs */
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		/* reset the OHCI start clock bit */
+		__raw_writel(0, base + USB_DWC_CTRL7);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1);
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
+				 : USB_DWC_CTRL3_OHCI1_CKEN);
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_ehci_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r |= USB_DWC_CTRL3_EHCI0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_HSTRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= USB_INTEN_EHCI;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~USB_INTEN_EHCI;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_HSTRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~USB_DWC_CTRL3_EHCI0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_udc_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_DCRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= USB_INTEN_UDC;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~USB_INTEN_UDC;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_DCRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_otg_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r |= USB_DWC_CTRL3_OTG0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_OTGD;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	} else {
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_OTGD;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~USB_DWC_CTRL3_OTG0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline int au1300_usb_control(int block, int enable)
+{
+	void __iomem *base =
+		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		__au1300_ohci_control(base, enable, 0);
+		break;
+	case ALCHEMY_USB_OHCI1:
+		__au1300_ohci_control(base, enable, 1);
+		break;
+	case ALCHEMY_USB_EHCI0:
+		__au1300_ehci_control(base, enable);
+		break;
+	case ALCHEMY_USB_UDC0:
+		__au1300_udc_control(base, enable);
+		break;
+	case ALCHEMY_USB_OTG0:
+		__au1300_otg_control(base, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+static inline void au1300_usb_init(void)
+{
+	void __iomem *base =
+		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+
+	/* set some sane defaults.  Note: we don't fiddle with DWC_CTRL4
+	 * here at all: Port 2 routing (EHCI or UDC) must be set either
+	 * by boot firmware or platform init code; I can't autodetect
+	 * a sane setting.
+	 */
+	__raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */
+	wmb();
+	__raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */
+	wmb();
+	__raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */
+	wmb();
+	__raw_writel(~0, base + USB_INT_STATUS); /* clear int status */
+	wmb();
+	/* set coherent access bit */
+	__raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL);
+	wmb();
+}
+
+static inline void __au1200_ohci_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
+		wmb();
+		udelay(2000);
+	} else {
+		__raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	}
+}
+
+static inline void __au1200_ehci_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	} else {
+		if (!(r & USBCFG_UCE))		/* UDC also off? */
+			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
+		__raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	}
+}
+
+static inline void __au1200_udc_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
+		wmb();
+	} else {
+		if (!(r & USBCFG_ECE))		/* EHCI also off? */
+			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
+		__raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
+		wmb();
+	}
+}
+
+static inline int au1200_usb_control(int block, int enable)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		__au1200_ohci_control(base, enable);
+		break;
+	case ALCHEMY_USB_UDC0:
+		__au1200_udc_control(base, enable);
+		break;
+	case ALCHEMY_USB_EHCI0:
+		__au1200_ehci_control(base, enable);
+		break;
+	default:
+		return -ENODEV;
+	}
+	return 0;
+}
+
+
+/* initialize USB block(s) to a known working state */
+static inline void au1200_usb_init(void)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+	__raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
+	wmb();
+	udelay(1000);
+}
+
+static inline int au1000_usb_init(unsigned long rb, int reg)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
+	unsigned long r = __raw_readl(base);
+	struct clk *c;
+
+	/* 48MHz check. Don't init if no one can provide it */
+	c = clk_get(NULL, "usbh_clk");
+	if (IS_ERR(c))
+		return -ENODEV;
+	if (clk_round_rate(c, 48000000) != 48000000) {
+		clk_put(c);
+		return -ENODEV;
+	}
+	if (clk_set_rate(c, 48000000)) {
+		clk_put(c);
+		return -ENODEV;
+	}
+	clk_put(c);
+
+#if defined(__BIG_ENDIAN)
+	r |= USBHEN_BE;
+#endif
+	r |= USBHEN_C;
+
+	__raw_writel(r, base);
+	wmb();
+	udelay(1000);
+
+	return 0;
+}
+
+
+static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
+	unsigned long r = __raw_readl(base + creg);
+	struct clk *c = clk_get(NULL, "usbh_clk");
+
+	if (IS_ERR(c))
+		return;
+
+	if (enable) {
+		if (clk_prepare_enable(c))
+			goto out;
+
+		__raw_writel(r | USBHEN_CE, base + creg);
+		wmb();
+		udelay(1000);
+		__raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
+		wmb();
+		udelay(1000);
+
+		/* wait for reset complete (read reg twice: au1500 erratum) */
+		while (__raw_readl(base + creg),
+			!(__raw_readl(base + creg) & USBHEN_RD))
+			udelay(1000);
+	} else {
+		__raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
+		wmb();
+		clk_disable_unprepare(c);
+	}
+out:
+	clk_put(c);
+}
+
+static inline int au1000_usb_control(int block, int enable, unsigned long rb,
+				     int creg)
+{
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		__au1xx0_ohci_control(enable, rb, creg);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+/*
+ * alchemy_usb_control - control Alchemy on-chip USB blocks
+ * @block:	USB block to target
+ * @enable:	set 1 to enable a block, 0 to disable
+ */
+int alchemy_usb_control(int block, int enable)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&alchemy_usb_lock, flags);
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		ret = au1000_usb_control(block, enable,
+			AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		ret = au1000_usb_control(block, enable,
+			AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		ret = au1200_usb_control(block, enable);
+		break;
+	case ALCHEMY_CPU_AU1300:
+		ret = au1300_usb_control(block, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	spin_unlock_irqrestore(&alchemy_usb_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(alchemy_usb_control);
+
+
+static unsigned long alchemy_usb_pmdata[2];
+
+static void au1000_usb_pm(unsigned long br, int creg, int susp)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(br);
+
+	if (susp) {
+		alchemy_usb_pmdata[0] = __raw_readl(base + creg);
+		/* There appears to be some undocumented reset register.... */
+		__raw_writel(0, base + 0x04);
+		wmb();
+		__raw_writel(0, base + creg);
+		wmb();
+	} else {
+		__raw_writel(alchemy_usb_pmdata[0], base + creg);
+		wmb();
+	}
+}
+
+static void au1200_usb_pm(int susp)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
+	if (susp) {
+		/* save OTG_CAP/MUX registers which indicate port routing */
+		/* FIXME: write an OTG driver to do that */
+		alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
+		alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
+	} else {
+		/* restore access to all MMIO areas */
+		au1200_usb_init();
+
+		/* restore OTG_CAP/MUX registers */
+		__raw_writel(alchemy_usb_pmdata[0], base + 0x00);
+		__raw_writel(alchemy_usb_pmdata[1], base + 0x04);
+		wmb();
+	}
+}
+
+static void au1300_usb_pm(int susp)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+	/* remember Port2 routing */
+	if (susp) {
+		alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4);
+	} else {
+		au1300_usb_init();
+		__raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4);
+		wmb();
+	}
+}
+
+static void alchemy_usb_pm(int susp)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1200_usb_pm(susp);
+		break;
+	case ALCHEMY_CPU_AU1300:
+		au1300_usb_pm(susp);
+		break;
+	}
+}
+
+static int alchemy_usb_suspend(void)
+{
+	alchemy_usb_pm(1);
+	return 0;
+}
+
+static void alchemy_usb_resume(void)
+{
+	alchemy_usb_pm(0);
+}
+
+static struct syscore_ops alchemy_usb_pm_ops = {
+	.suspend	= alchemy_usb_suspend,
+	.resume		= alchemy_usb_resume,
+};
+
+static int __init alchemy_usb_init(void)
+{
+	int ret = 0;
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		ret = au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR,
+				      AU1000_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		ret = au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR,
+				      AU1550_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1200_usb_init();
+		break;
+	case ALCHEMY_CPU_AU1300:
+		au1300_usb_init();
+		break;
+	}
+
+	if (!ret)
+		register_syscore_ops(&alchemy_usb_pm_ops);
+
+	return ret;
+}
+arch_initcall(alchemy_usb_init);
diff --git a/arch/mips/alchemy/common/vss.c b/arch/mips/alchemy/common/vss.c
new file mode 100644
index 0000000000..3d0d468d93
--- /dev/null
+++ b/arch/mips/alchemy/common/vss.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Au1300 media block power gating (VSS)
+ *
+ * This is a stop-gap solution until I have the clock framework integration
+ * ready. This stuff here really must be handled transparently when clocks
+ * for various media blocks are enabled/disabled.
+ */
+
+#include <linux/export.h>
+#include <linux/spinlock.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define VSS_GATE	0x00	/* gate wait timers */
+#define VSS_CLKRST	0x04	/* clock/block control */
+#define VSS_FTR		0x08	/* footers */
+
+#define VSS_ADDR(blk)	(KSEG1ADDR(AU1300_VSS_PHYS_ADDR) + (blk * 0x0c))
+
+static DEFINE_SPINLOCK(au1300_vss_lock);
+
+/* enable a block as outlined in the databook */
+static inline void __enable_block(int block)
+{
+	void __iomem *base = (void __iomem *)VSS_ADDR(block);
+
+	__raw_writel(3, base + VSS_CLKRST);	/* enable clock, assert reset */
+	wmb();
+
+	__raw_writel(0x01fffffe, base + VSS_GATE); /* maximum setup time */
+	wmb();
+
+	/* enable footers in sequence */
+	__raw_writel(0x01, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x03, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x07, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x0f, base + VSS_FTR);
+	wmb();
+
+	__raw_writel(0x01ffffff, base + VSS_GATE); /* start FSM too */
+	wmb();
+
+	__raw_writel(2, base + VSS_CLKRST);	/* deassert reset */
+	wmb();
+
+	__raw_writel(0x1f, base + VSS_FTR);	/* enable isolation cells */
+	wmb();
+}
+
+/* disable a block as outlined in the databook */
+static inline void __disable_block(int block)
+{
+	void __iomem *base = (void __iomem *)VSS_ADDR(block);
+
+	__raw_writel(0x0f, base + VSS_FTR);	/* disable isolation cells */
+	wmb();
+	__raw_writel(0, base + VSS_GATE);	/* disable FSM */
+	wmb();
+	__raw_writel(3, base + VSS_CLKRST);	/* assert reset */
+	wmb();
+	__raw_writel(1, base + VSS_CLKRST);	/* disable clock */
+	wmb();
+	__raw_writel(0, base + VSS_FTR);	/* disable all footers */
+	wmb();
+}
+
+void au1300_vss_block_control(int block, int enable)
+{
+	unsigned long flags;
+
+	if (alchemy_get_cputype() != ALCHEMY_CPU_AU1300)
+		return;
+
+	/* only one block at a time */
+	spin_lock_irqsave(&au1300_vss_lock, flags);
+	if (enable)
+		__enable_block(block);
+	else
+		__disable_block(block);
+	spin_unlock_irqrestore(&au1300_vss_lock, flags);
+}
+EXPORT_SYMBOL_GPL(au1300_vss_block_control);