Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 527 insertions, 0 deletions

diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
new file mode 100644
index 0000000000..82bc2766e2
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -0,0 +1,527 @@
+/*
+ * GPIO functions for Au1000, Au1500, Au1100, Au1550, Au1200
+ *
+ * Copyright (c) 2009 Manuel Lauss.
+ *
+ * Licensed under the terms outlined in the file COPYING.
+ */
+
+#ifndef _ALCHEMY_GPIO_AU1000_H_
+#define _ALCHEMY_GPIO_AU1000_H_
+
+#include <asm/mach-au1x00/au1000.h>
+
+/* The default GPIO numberspace as documented in the Alchemy manuals.
+ * GPIO0-31 from GPIO1 block,	GPIO200-215 from GPIO2 block.
+ */
+#define ALCHEMY_GPIO1_BASE	0
+#define ALCHEMY_GPIO2_BASE	200
+
+#define ALCHEMY_GPIO1_NUM	32
+#define ALCHEMY_GPIO2_NUM	16
+#define ALCHEMY_GPIO1_MAX	(ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1)
+#define ALCHEMY_GPIO2_MAX	(ALCHEMY_GPIO2_BASE + ALCHEMY_GPIO2_NUM - 1)
+
+#define MAKE_IRQ(intc, off)	(AU1000_INTC##intc##_INT_BASE + (off))
+
+/* GPIO1 registers within SYS_ area */
+#define AU1000_SYS_TRIOUTRD	0x100
+#define AU1000_SYS_TRIOUTCLR	0x100
+#define AU1000_SYS_OUTPUTRD	0x108
+#define AU1000_SYS_OUTPUTSET	0x108
+#define AU1000_SYS_OUTPUTCLR	0x10C
+#define AU1000_SYS_PINSTATERD	0x110
+#define AU1000_SYS_PININPUTEN	0x110
+
+/* register offsets within GPIO2 block */
+#define AU1000_GPIO2_DIR	0x00
+#define AU1000_GPIO2_OUTPUT	0x08
+#define AU1000_GPIO2_PINSTATE	0x0C
+#define AU1000_GPIO2_INTENABLE	0x10
+#define AU1000_GPIO2_ENABLE	0x14
+
+struct gpio;
+
+static inline int au1000_gpio1_to_irq(int gpio)
+{
+	return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
+}
+
+static inline int au1000_gpio2_to_irq(int gpio)
+{
+	return -ENXIO;
+}
+
+static inline int au1000_irq_to_gpio(int irq)
+{
+	if ((irq >= AU1000_GPIO0_INT) && (irq <= AU1000_GPIO31_INT))
+		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO0_INT) + 0;
+
+	return -ENXIO;
+}
+
+static inline int au1500_gpio1_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO1_BASE;
+
+	switch (gpio) {
+	case 0 ... 15:
+	case 20:
+	case 23 ... 28: return MAKE_IRQ(1, gpio);
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1500_gpio2_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO2_BASE;
+
+	switch (gpio) {
+	case 0 ... 3:	return MAKE_IRQ(1, 16 + gpio - 0);
+	case 4 ... 5:	return MAKE_IRQ(1, 21 + gpio - 4);
+	case 6 ... 7:	return MAKE_IRQ(1, 29 + gpio - 6);
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1500_irq_to_gpio(int irq)
+{
+	switch (irq) {
+	case AU1500_GPIO0_INT ... AU1500_GPIO15_INT:
+	case AU1500_GPIO20_INT:
+	case AU1500_GPIO23_INT ... AU1500_GPIO28_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO0_INT) + 0;
+	case AU1500_GPIO200_INT ... AU1500_GPIO203_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO200_INT) + 0;
+	case AU1500_GPIO204_INT ... AU1500_GPIO205_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO204_INT) + 4;
+	case AU1500_GPIO206_INT ... AU1500_GPIO207_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO206_INT) + 6;
+	case AU1500_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + 8;
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1100_gpio1_to_irq(int gpio)
+{
+	return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
+}
+
+static inline int au1100_gpio2_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO2_BASE;
+
+	if ((gpio >= 8) && (gpio <= 15))
+		return MAKE_IRQ(0, 29);		/* shared GPIO208_215 */
+
+	return -ENXIO;
+}
+
+static inline int au1100_irq_to_gpio(int irq)
+{
+	switch (irq) {
+	case AU1100_GPIO0_INT ... AU1100_GPIO31_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1100_GPIO0_INT) + 0;
+	case AU1100_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + 8;
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1550_gpio1_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO1_BASE;
+
+	switch (gpio) {
+	case 0 ... 15:
+	case 20 ... 28: return MAKE_IRQ(1, gpio);
+	case 16 ... 17: return MAKE_IRQ(1, 18 + gpio - 16);
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1550_gpio2_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO2_BASE;
+
+	switch (gpio) {
+	case 0:		return MAKE_IRQ(1, 16);
+	case 1 ... 5:	return MAKE_IRQ(1, 17); /* shared GPIO201_205 */
+	case 6 ... 7:	return MAKE_IRQ(1, 29 + gpio - 6);
+	case 8 ... 15:	return MAKE_IRQ(1, 31); /* shared GPIO208_215 */
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1550_irq_to_gpio(int irq)
+{
+	switch (irq) {
+	case AU1550_GPIO0_INT ... AU1550_GPIO15_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO0_INT) + 0;
+	case AU1550_GPIO200_INT:
+	case AU1550_GPIO201_205_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO200_INT) + 0;
+	case AU1550_GPIO16_INT ... AU1550_GPIO28_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO16_INT) + 16;
+	case AU1550_GPIO206_INT ... AU1550_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO206_INT) + 6;
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1200_gpio1_to_irq(int gpio)
+{
+	return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
+}
+
+static inline int au1200_gpio2_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO2_BASE;
+
+	switch (gpio) {
+	case 0 ... 2:	return MAKE_IRQ(0, 5 + gpio - 0);
+	case 3:		return MAKE_IRQ(0, 22);
+	case 4 ... 7:	return MAKE_IRQ(0, 24 + gpio - 4);
+	case 8 ... 15:	return MAKE_IRQ(0, 28); /* shared GPIO208_215 */
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1200_irq_to_gpio(int irq)
+{
+	switch (irq) {
+	case AU1200_GPIO0_INT ... AU1200_GPIO31_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1200_GPIO0_INT) + 0;
+	case AU1200_GPIO200_INT ... AU1200_GPIO202_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO200_INT) + 0;
+	case AU1200_GPIO203_INT:
+		return ALCHEMY_GPIO2_BASE + 3;
+	case AU1200_GPIO204_INT ... AU1200_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO204_INT) + 4;
+	}
+
+	return -ENXIO;
+}
+
+/*
+ * GPIO1 block macros for common linux gpio functions.
+ */
+static inline void alchemy_gpio1_set_value(int gpio, int v)
+{
+	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
+	unsigned long r = v ? AU1000_SYS_OUTPUTSET : AU1000_SYS_OUTPUTCLR;
+	alchemy_wrsys(mask, r);
+}
+
+static inline int alchemy_gpio1_get_value(int gpio)
+{
+	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
+	return alchemy_rdsys(AU1000_SYS_PINSTATERD) & mask;
+}
+
+static inline int alchemy_gpio1_direction_input(int gpio)
+{
+	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
+	alchemy_wrsys(mask, AU1000_SYS_TRIOUTCLR);
+	return 0;
+}
+
+static inline int alchemy_gpio1_direction_output(int gpio, int v)
+{
+	/* hardware switches to "output" mode when one of the two
+	 * "set_value" registers is accessed.
+	 */
+	alchemy_gpio1_set_value(gpio, v);
+	return 0;
+}
+
+static inline int alchemy_gpio1_is_valid(int gpio)
+{
+	return ((gpio >= ALCHEMY_GPIO1_BASE) && (gpio <= ALCHEMY_GPIO1_MAX));
+}
+
+static inline int alchemy_gpio1_to_irq(int gpio)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		return au1000_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1100:
+		return au1100_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1500:
+		return au1500_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1550:
+		return au1550_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1200:
+		return au1200_gpio1_to_irq(gpio);
+	}
+	return -ENXIO;
+}
+
+/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
+ * SYS_PININPUTEN is written to at least once.  On Au1550/Au1200/Au1300 this
+ * register enables use of GPIOs as wake source.
+ */
+static inline void alchemy_gpio1_input_enable(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+	__raw_writel(0, base + 0x110);		/* the write op is key */
+	wmb();
+}
+
+/*
+ * GPIO2 block macros for common linux GPIO functions. The 'gpio'
+ * parameter must be in range of ALCHEMY_GPIO2_BASE..ALCHEMY_GPIO2_MAX.
+ */
+static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE);
+	unsigned long d = __raw_readl(base + AU1000_GPIO2_DIR);
+
+	if (to_out)
+		d |= mask;
+	else
+		d &= ~mask;
+	__raw_writel(d, base + AU1000_GPIO2_DIR);
+	wmb();
+}
+
+static inline void alchemy_gpio2_set_value(int gpio, int v)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	unsigned long mask;
+	mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE);
+	__raw_writel(mask, base + AU1000_GPIO2_OUTPUT);
+	wmb();
+}
+
+static inline int alchemy_gpio2_get_value(int gpio)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	return __raw_readl(base + AU1000_GPIO2_PINSTATE) &
+				(1 << (gpio - ALCHEMY_GPIO2_BASE));
+}
+
+static inline int alchemy_gpio2_direction_input(int gpio)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+	__alchemy_gpio2_mod_dir(gpio, 0);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static inline int alchemy_gpio2_direction_output(int gpio, int v)
+{
+	unsigned long flags;
+	alchemy_gpio2_set_value(gpio, v);
+	local_irq_save(flags);
+	__alchemy_gpio2_mod_dir(gpio, 1);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static inline int alchemy_gpio2_is_valid(int gpio)
+{
+	return ((gpio >= ALCHEMY_GPIO2_BASE) && (gpio <= ALCHEMY_GPIO2_MAX));
+}
+
+static inline int alchemy_gpio2_to_irq(int gpio)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		return au1000_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1100:
+		return au1100_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1500:
+		return au1500_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1550:
+		return au1550_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1200:
+		return au1200_gpio2_to_irq(gpio);
+	}
+	return -ENXIO;
+}
+
+/**********************************************************************/
+
+/* GPIO2 shared interrupts and control */
+
+static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	unsigned long r = __raw_readl(base + AU1000_GPIO2_INTENABLE);
+	if (en)
+		r |= 1 << gpio2;
+	else
+		r &= ~(1 << gpio2);
+	__raw_writel(r, base + AU1000_GPIO2_INTENABLE);
+	wmb();
+}
+
+/**
+ * alchemy_gpio2_enable_int - Enable a GPIO2 pins' shared irq contribution.
+ * @gpio2:	The GPIO2 pin to activate (200...215).
+ *
+ * GPIO208-215 have one shared interrupt line to the INTC.  They are
+ * and'ed with a per-pin enable bit and finally or'ed together to form
+ * a single irq request (useful for active-high sources).
+ * With this function, a pins' individual contribution to the int request
+ * can be enabled.  As with all other GPIO-based interrupts, the INTC
+ * must be programmed to accept the GPIO208_215 interrupt as well.
+ *
+ * NOTE: Calling this macro is only necessary for GPIO208-215; all other
+ * GPIO2-based interrupts have their own request to the INTC.  Please
+ * consult your Alchemy databook for more information!
+ *
+ * NOTE: On the Au1550, GPIOs 201-205 also have a shared interrupt request
+ * line to the INTC, GPIO201_205.  This function can be used for those
+ * as well.
+ *
+ * NOTE: 'gpio2' parameter must be in range of the GPIO2 numberspace
+ * (200-215 by default). No sanity checks are made,
+ */
+static inline void alchemy_gpio2_enable_int(int gpio2)
+{
+	unsigned long flags;
+
+	gpio2 -= ALCHEMY_GPIO2_BASE;
+
+	/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1100:
+	case ALCHEMY_CPU_AU1500:
+		gpio2 -= 8;
+	}
+
+	local_irq_save(flags);
+	__alchemy_gpio2_mod_int(gpio2, 1);
+	local_irq_restore(flags);
+}
+
+/**
+ * alchemy_gpio2_disable_int - Disable a GPIO2 pins' shared irq contribution.
+ * @gpio2:	The GPIO2 pin to activate (200...215).
+ *
+ * see function alchemy_gpio2_enable_int() for more information.
+ */
+static inline void alchemy_gpio2_disable_int(int gpio2)
+{
+	unsigned long flags;
+
+	gpio2 -= ALCHEMY_GPIO2_BASE;
+
+	/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1100:
+	case ALCHEMY_CPU_AU1500:
+		gpio2 -= 8;
+	}
+
+	local_irq_save(flags);
+	__alchemy_gpio2_mod_int(gpio2, 0);
+	local_irq_restore(flags);
+}
+
+/**
+ * alchemy_gpio2_enable -  Activate GPIO2 block.
+ *
+ * The GPIO2 block must be enabled excplicitly to work.	 On systems
+ * where this isn't done by the bootloader, this macro can be used.
+ */
+static inline void alchemy_gpio2_enable(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	__raw_writel(3, base + AU1000_GPIO2_ENABLE);	/* reset, clock enabled */
+	wmb();
+	__raw_writel(1, base + AU1000_GPIO2_ENABLE);	/* clock enabled */
+	wmb();
+}
+
+/**
+ * alchemy_gpio2_disable - disable GPIO2 block.
+ *
+ * Disable and put GPIO2 block in low-power mode.
+ */
+static inline void alchemy_gpio2_disable(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	__raw_writel(2, base + AU1000_GPIO2_ENABLE);	/* reset, clock disabled */
+	wmb();
+}
+
+/**********************************************************************/
+
+/* wrappers for on-chip gpios; can be used before gpio chips have been
+ * registered with gpiolib.
+ */
+static inline int alchemy_gpio_direction_input(int gpio)
+{
+	return (gpio >= ALCHEMY_GPIO2_BASE) ?
+		alchemy_gpio2_direction_input(gpio) :
+		alchemy_gpio1_direction_input(gpio);
+}
+
+static inline int alchemy_gpio_direction_output(int gpio, int v)
+{
+	return (gpio >= ALCHEMY_GPIO2_BASE) ?
+		alchemy_gpio2_direction_output(gpio, v) :
+		alchemy_gpio1_direction_output(gpio, v);
+}
+
+static inline int alchemy_gpio_get_value(int gpio)
+{
+	return (gpio >= ALCHEMY_GPIO2_BASE) ?
+		alchemy_gpio2_get_value(gpio) :
+		alchemy_gpio1_get_value(gpio);
+}
+
+static inline void alchemy_gpio_set_value(int gpio, int v)
+{
+	if (gpio >= ALCHEMY_GPIO2_BASE)
+		alchemy_gpio2_set_value(gpio, v);
+	else
+		alchemy_gpio1_set_value(gpio, v);
+}
+
+static inline int alchemy_gpio_is_valid(int gpio)
+{
+	return (gpio >= ALCHEMY_GPIO2_BASE) ?
+		alchemy_gpio2_is_valid(gpio) :
+		alchemy_gpio1_is_valid(gpio);
+}
+
+static inline int alchemy_gpio_to_irq(int gpio)
+{
+	return (gpio >= ALCHEMY_GPIO2_BASE) ?
+		alchemy_gpio2_to_irq(gpio) :
+		alchemy_gpio1_to_irq(gpio);
+}
+
+static inline int alchemy_irq_to_gpio(int irq)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		return au1000_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1100:
+		return au1100_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1500:
+		return au1500_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1550:
+		return au1550_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1200:
+		return au1200_irq_to_gpio(irq);
+	}
+	return -ENXIO;
+}
+
+#endif /* _ALCHEMY_GPIO_AU1000_H_ */