Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 758 insertions, 0 deletions

diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
new file mode 100644
index 000000000..68d5211af
--- /dev/null
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -0,0 +1,758 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2003 Christoph Hellwig (hch@lst.de)
+ * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/smp.h>
+#include <linux/dma-direct.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/xtalk-bridge.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/crc16.h>
+#include <linux/irqdomain.h>
+
+#include <asm/pci/bridge.h>
+#include <asm/paccess.h>
+#include <asm/sn/irq_alloc.h>
+#include <asm/sn/ioc3.h>
+
+#define CRC16_INIT	0
+#define CRC16_VALID	0xb001
+
+/*
+ * Common phys<->dma mapping for platforms using pci xtalk bridge
+ */
+dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus);
+
+	return bc->baddr + paddr;
+}
+
+phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr & ~(0xffUL << 56);
+}
+
+/*
+ * Most of the IOC3 PCI config register aren't present
+ * we emulate what is needed for a normal PCI enumeration
+ */
+static int ioc3_cfg_rd(void *addr, int where, int size, u32 *value, u32 sid)
+{
+	u32 cf, shift, mask;
+
+	switch (where & ~3) {
+	case 0x00 ... 0x10:
+	case 0x40 ... 0x44:
+		if (get_dbe(cf, (u32 *)addr))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		break;
+	case 0x2c:
+		cf = sid;
+		break;
+	case 0x3c:
+		/* emulate sane interrupt pin value */
+		cf = 0x00000100;
+		break;
+	default:
+		cf = 0;
+		break;
+	}
+	shift = (where & 3) << 3;
+	mask = 0xffffffffU >> ((4 - size) << 3);
+	*value = (cf >> shift) & mask;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int ioc3_cfg_wr(void *addr, int where, int size, u32 value)
+{
+	u32 cf, shift, mask, smask;
+
+	if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
+		return PCIBIOS_SUCCESSFUL;
+
+	if (get_dbe(cf, (u32 *)addr))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	shift = ((where & 3) << 3);
+	mask = (0xffffffffU >> ((4 - size) << 3));
+	smask = mask << shift;
+
+	cf = (cf & ~smask) | ((value & mask) << shift);
+	if (put_dbe(cf, (u32 *)addr))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static void bridge_disable_swapping(struct pci_dev *dev)
+{
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+	int slot = PCI_SLOT(dev->devfn);
+
+	/* Turn off byte swapping */
+	bridge_clr(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
+	bridge_read(bc, b_widget.w_tflush);	/* Flush */
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
+	bridge_disable_swapping);
+
+
+/*
+ * The Bridge ASIC supports both type 0 and type 1 access.  Type 1 is
+ * not really documented, so right now I can't write code which uses it.
+ * Therefore we use type 0 accesses for now even though they won't work
+ * correctly for PCI-to-PCI bridges.
+ *
+ * The function is complicated by the ultimate brokenness of the IOC3 chip
+ * which is used in SGI systems.  The IOC3 can only handle 32-bit PCI
+ * accesses and does only decode parts of it's address space.
+ */
+static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
+				 int where, int size, u32 *value)
+{
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+	struct bridge_regs *bridge = bc->base;
+	int slot = PCI_SLOT(devfn);
+	int fn = PCI_FUNC(devfn);
+	void *addr;
+	u32 cf;
+	int res;
+
+	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
+	if (get_dbe(cf, (u32 *)addr))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/*
+	 * IOC3 is broken beyond belief ...  Don't even give the
+	 * generic PCI code a chance to look at it for real ...
+	 */
+	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
+		addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+		return ioc3_cfg_rd(addr, where, size, value,
+				   bc->ioc3_sid[slot]);
+	}
+
+	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
+
+	if (size == 1)
+		res = get_dbe(*value, (u8 *)addr);
+	else if (size == 2)
+		res = get_dbe(*value, (u16 *)addr);
+	else
+		res = get_dbe(*value, (u32 *)addr);
+
+	return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
+				 int where, int size, u32 *value)
+{
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+	struct bridge_regs *bridge = bc->base;
+	int busno = bus->number;
+	int slot = PCI_SLOT(devfn);
+	int fn = PCI_FUNC(devfn);
+	void *addr;
+	u32 cf;
+	int res;
+
+	bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
+	addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
+	if (get_dbe(cf, (u32 *)addr))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/*
+	 * IOC3 is broken beyond belief ...  Don't even give the
+	 * generic PCI code a chance to look at it for real ...
+	 */
+	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
+		addr = &bridge->b_type1_cfg.c[(fn << 8) | (where & ~3)];
+		return ioc3_cfg_rd(addr, where, size, value,
+				   bc->ioc3_sid[slot]);
+	}
+
+	addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
+
+	if (size == 1)
+		res = get_dbe(*value, (u8 *)addr);
+	else if (size == 2)
+		res = get_dbe(*value, (u16 *)addr);
+	else
+		res = get_dbe(*value, (u32 *)addr);
+
+	return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_read_config(struct pci_bus *bus, unsigned int devfn,
+			   int where, int size, u32 *value)
+{
+	if (!pci_is_root_bus(bus))
+		return pci_conf1_read_config(bus, devfn, where, size, value);
+
+	return pci_conf0_read_config(bus, devfn, where, size, value);
+}
+
+static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 value)
+{
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+	struct bridge_regs *bridge = bc->base;
+	int slot = PCI_SLOT(devfn);
+	int fn = PCI_FUNC(devfn);
+	void *addr;
+	u32 cf;
+	int res;
+
+	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
+	if (get_dbe(cf, (u32 *)addr))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/*
+	 * IOC3 is broken beyond belief ...  Don't even give the
+	 * generic PCI code a chance to look at it for real ...
+	 */
+	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
+		addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+		return ioc3_cfg_wr(addr, where, size, value);
+	}
+
+	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
+
+	if (size == 1)
+		res = put_dbe(value, (u8 *)addr);
+	else if (size == 2)
+		res = put_dbe(value, (u16 *)addr);
+	else
+		res = put_dbe(value, (u32 *)addr);
+
+	if (res)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 value)
+{
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+	struct bridge_regs *bridge = bc->base;
+	int slot = PCI_SLOT(devfn);
+	int fn = PCI_FUNC(devfn);
+	int busno = bus->number;
+	void *addr;
+	u32 cf;
+	int res;
+
+	bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
+	addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
+	if (get_dbe(cf, (u32 *)addr))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/*
+	 * IOC3 is broken beyond belief ...  Don't even give the
+	 * generic PCI code a chance to look at it for real ...
+	 */
+	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
+		addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+		return ioc3_cfg_wr(addr, where, size, value);
+	}
+
+	addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
+
+	if (size == 1)
+		res = put_dbe(value, (u8 *)addr);
+	else if (size == 2)
+		res = put_dbe(value, (u16 *)addr);
+	else
+		res = put_dbe(value, (u32 *)addr);
+
+	if (res)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_write_config(struct pci_bus *bus, unsigned int devfn,
+	int where, int size, u32 value)
+{
+	if (!pci_is_root_bus(bus))
+		return pci_conf1_write_config(bus, devfn, where, size, value);
+
+	return pci_conf0_write_config(bus, devfn, where, size, value);
+}
+
+static struct pci_ops bridge_pci_ops = {
+	.read	 = pci_read_config,
+	.write	 = pci_write_config,
+};
+
+struct bridge_irq_chip_data {
+	struct bridge_controller *bc;
+	nasid_t nasid;
+};
+
+static int bridge_set_affinity(struct irq_data *d, const struct cpumask *mask,
+			       bool force)
+{
+#ifdef CONFIG_NUMA
+	struct bridge_irq_chip_data *data = d->chip_data;
+	int bit = d->parent_data->hwirq;
+	int pin = d->hwirq;
+	int ret, cpu;
+
+	ret = irq_chip_set_affinity_parent(d, mask, force);
+	if (ret >= 0) {
+		cpu = cpumask_first_and(mask, cpu_online_mask);
+		data->nasid = cpu_to_node(cpu);
+		bridge_write(data->bc, b_int_addr[pin].addr,
+			     (((data->bc->intr_addr >> 30) & 0x30000) |
+			      bit | (data->nasid << 8)));
+		bridge_read(data->bc, b_wid_tflush);
+	}
+	return ret;
+#else
+	return irq_chip_set_affinity_parent(d, mask, force);
+#endif
+}
+
+struct irq_chip bridge_irq_chip = {
+	.name             = "BRIDGE",
+	.irq_mask         = irq_chip_mask_parent,
+	.irq_unmask       = irq_chip_unmask_parent,
+	.irq_set_affinity = bridge_set_affinity
+};
+
+static int bridge_domain_alloc(struct irq_domain *domain, unsigned int virq,
+			       unsigned int nr_irqs, void *arg)
+{
+	struct bridge_irq_chip_data *data;
+	struct irq_alloc_info *info = arg;
+	int ret;
+
+	if (nr_irqs > 1 || !info)
+		return -EINVAL;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+	if (ret >= 0) {
+		data->bc = info->ctrl;
+		data->nasid = info->nasid;
+		irq_domain_set_info(domain, virq, info->pin, &bridge_irq_chip,
+				    data, handle_level_irq, NULL, NULL);
+	} else {
+		kfree(data);
+	}
+
+	return ret;
+}
+
+static void bridge_domain_free(struct irq_domain *domain, unsigned int virq,
+			       unsigned int nr_irqs)
+{
+	struct irq_data *irqd = irq_domain_get_irq_data(domain, virq);
+
+	if (nr_irqs)
+		return;
+
+	kfree(irqd->chip_data);
+	irq_domain_free_irqs_top(domain, virq, nr_irqs);
+}
+
+static int bridge_domain_activate(struct irq_domain *domain,
+				  struct irq_data *irqd, bool reserve)
+{
+	struct bridge_irq_chip_data *data = irqd->chip_data;
+	struct bridge_controller *bc = data->bc;
+	int bit = irqd->parent_data->hwirq;
+	int pin = irqd->hwirq;
+	u32 device;
+
+	bridge_write(bc, b_int_addr[pin].addr,
+		     (((bc->intr_addr >> 30) & 0x30000) |
+		      bit | (data->nasid << 8)));
+	bridge_set(bc, b_int_enable, (1 << pin));
+	bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */
+
+	/*
+	 * Enable sending of an interrupt clear packet to the hub on a high to
+	 * low transition of the interrupt pin.
+	 *
+	 * IRIX sets additional bits in the address which are documented as
+	 * reserved in the bridge docs.
+	 */
+	bridge_set(bc, b_int_mode, (1UL << pin));
+
+	/*
+	 * We assume the bridge to have a 1:1 mapping between devices
+	 * (slots) and intr pins.
+	 */
+	device = bridge_read(bc, b_int_device);
+	device &= ~(7 << (pin*3));
+	device |= (pin << (pin*3));
+	bridge_write(bc, b_int_device, device);
+
+	bridge_read(bc, b_wid_tflush);
+	return 0;
+}
+
+static void bridge_domain_deactivate(struct irq_domain *domain,
+				     struct irq_data *irqd)
+{
+	struct bridge_irq_chip_data *data = irqd->chip_data;
+
+	bridge_clr(data->bc, b_int_enable, (1 << irqd->hwirq));
+	bridge_read(data->bc, b_wid_tflush);
+}
+
+static const struct irq_domain_ops bridge_domain_ops = {
+	.alloc      = bridge_domain_alloc,
+	.free       = bridge_domain_free,
+	.activate   = bridge_domain_activate,
+	.deactivate = bridge_domain_deactivate
+};
+
+/*
+ * All observed requests have pin == 1. We could have a global here, that
+ * gets incremented and returned every time - unfortunately, pci_map_irq
+ * may be called on the same device over and over, and need to return the
+ * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
+ *
+ * A given PCI device, in general, should be able to intr any of the cpus
+ * on any one of the hubs connected to its xbow.
+ */
+static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+	struct irq_alloc_info info;
+	int irq;
+
+	switch (pin) {
+	case PCI_INTERRUPT_UNKNOWN:
+	case PCI_INTERRUPT_INTA:
+	case PCI_INTERRUPT_INTC:
+		pin = 0;
+		break;
+	case PCI_INTERRUPT_INTB:
+	case PCI_INTERRUPT_INTD:
+		pin = 1;
+	}
+
+	irq = bc->pci_int[slot][pin];
+	if (irq == -1) {
+		info.ctrl = bc;
+		info.nasid = bc->nasid;
+		info.pin = bc->int_mapping[slot][pin];
+
+		irq = irq_domain_alloc_irqs(bc->domain, 1, bc->nasid, &info);
+		if (irq < 0)
+			return irq;
+
+		bc->pci_int[slot][pin] = irq;
+	}
+	return irq;
+}
+
+#define IOC3_SID(sid)	(PCI_VENDOR_ID_SGI | ((sid) << 16))
+
+static void bridge_setup_ip27_baseio6g(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO6G);
+	bc->ioc3_sid[6] = IOC3_SID(IOC3_SUBSYS_IP27_MIO);
+	bc->int_mapping[2][1] = 4;
+	bc->int_mapping[6][1] = 6;
+}
+
+static void bridge_setup_ip27_baseio(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO);
+	bc->int_mapping[2][1] = 4;
+}
+
+static void bridge_setup_ip29_baseio(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP29_SYSBOARD);
+	bc->int_mapping[2][1] = 3;
+}
+
+static void bridge_setup_ip30_sysboard(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP30_SYSBOARD);
+	bc->int_mapping[2][1] = 4;
+}
+
+static void bridge_setup_menet(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[0] = IOC3_SID(IOC3_SUBSYS_MENET);
+	bc->ioc3_sid[1] = IOC3_SID(IOC3_SUBSYS_MENET);
+	bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_MENET);
+	bc->ioc3_sid[3] = IOC3_SID(IOC3_SUBSYS_MENET4);
+}
+
+static void bridge_setup_io7(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IO7);
+}
+
+static void bridge_setup_io8(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IO8);
+}
+
+static void bridge_setup_io9(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[1] = IOC3_SID(IOC3_SUBSYS_IO9);
+}
+
+static void bridge_setup_ip34_fuel_sysboard(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IP34_SYSBOARD);
+}
+
+#define BRIDGE_BOARD_SETUP(_partno, _setup)	\
+	{ .match = _partno, .setup = _setup }
+
+static const struct {
+	char *match;
+	void (*setup)(struct bridge_controller *bc);
+} bridge_ioc3_devid[] = {
+	BRIDGE_BOARD_SETUP("030-0734-", bridge_setup_ip27_baseio6g),
+	BRIDGE_BOARD_SETUP("030-0880-", bridge_setup_ip27_baseio6g),
+	BRIDGE_BOARD_SETUP("030-1023-", bridge_setup_ip27_baseio),
+	BRIDGE_BOARD_SETUP("030-1124-", bridge_setup_ip27_baseio),
+	BRIDGE_BOARD_SETUP("030-1025-", bridge_setup_ip29_baseio),
+	BRIDGE_BOARD_SETUP("030-1244-", bridge_setup_ip29_baseio),
+	BRIDGE_BOARD_SETUP("030-1389-", bridge_setup_ip29_baseio),
+	BRIDGE_BOARD_SETUP("030-0887-", bridge_setup_ip30_sysboard),
+	BRIDGE_BOARD_SETUP("030-1467-", bridge_setup_ip30_sysboard),
+	BRIDGE_BOARD_SETUP("030-0873-", bridge_setup_menet),
+	BRIDGE_BOARD_SETUP("030-1557-", bridge_setup_io7),
+	BRIDGE_BOARD_SETUP("030-1673-", bridge_setup_io8),
+	BRIDGE_BOARD_SETUP("030-1771-", bridge_setup_io9),
+	BRIDGE_BOARD_SETUP("030-1707-", bridge_setup_ip34_fuel_sysboard),
+};
+
+static void bridge_setup_board(struct bridge_controller *bc, char *partnum)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bridge_ioc3_devid); i++)
+		if (!strncmp(partnum, bridge_ioc3_devid[i].match,
+			     strlen(bridge_ioc3_devid[i].match))) {
+			bridge_ioc3_devid[i].setup(bc);
+		}
+}
+
+static int bridge_nvmem_match(struct device *dev, const void *data)
+{
+	const char *name = dev_name(dev);
+	const char *prefix = data;
+
+	if (strlen(name) < strlen(prefix))
+		return 0;
+
+	return memcmp(prefix, dev_name(dev), strlen(prefix)) == 0;
+}
+
+static int bridge_get_partnum(u64 baddr, char *partnum)
+{
+	struct nvmem_device *nvmem;
+	char prefix[24];
+	u8 prom[64];
+	int i, j;
+	int ret;
+
+	snprintf(prefix, sizeof(prefix), "bridge-%012llx-0b-", baddr);
+
+	nvmem = nvmem_device_find(prefix, bridge_nvmem_match);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	ret = nvmem_device_read(nvmem, 0, 64, prom);
+	nvmem_device_put(nvmem);
+
+	if (ret != 64)
+		return ret;
+
+	if (crc16(CRC16_INIT, prom, 32) != CRC16_VALID ||
+	    crc16(CRC16_INIT, prom + 32, 32) != CRC16_VALID)
+		return -EINVAL;
+
+	/* Assemble part number */
+	j = 0;
+	for (i = 0; i < 19; i++)
+		if (prom[i + 11] != ' ')
+			partnum[j++] = prom[i + 11];
+
+	for (i = 0; i < 6; i++)
+		if (prom[i + 32] != ' ')
+			partnum[j++] = prom[i + 32];
+
+	partnum[j] = 0;
+
+	return 0;
+}
+
+static int bridge_probe(struct platform_device *pdev)
+{
+	struct xtalk_bridge_platform_data *bd = dev_get_platdata(&pdev->dev);
+	struct device *dev = &pdev->dev;
+	struct bridge_controller *bc;
+	struct pci_host_bridge *host;
+	struct irq_domain *domain, *parent;
+	struct fwnode_handle *fn;
+	char partnum[26];
+	int slot;
+	int err;
+
+	/* get part number from one wire prom */
+	if (bridge_get_partnum(virt_to_phys((void *)bd->bridge_addr), partnum))
+		return -EPROBE_DEFER; /* not available yet */
+
+	parent = irq_get_default_host();
+	if (!parent)
+		return -ENODEV;
+	fn = irq_domain_alloc_named_fwnode("BRIDGE");
+	if (!fn)
+		return -ENOMEM;
+	domain = irq_domain_create_hierarchy(parent, 0, 8, fn,
+					     &bridge_domain_ops, NULL);
+	if (!domain) {
+		irq_domain_free_fwnode(fn);
+		return -ENOMEM;
+	}
+
+	pci_set_flags(PCI_PROBE_ONLY);
+
+	host = devm_pci_alloc_host_bridge(dev, sizeof(*bc));
+	if (!host) {
+		err = -ENOMEM;
+		goto err_remove_domain;
+	}
+
+	bc = pci_host_bridge_priv(host);
+
+	bc->busn.name		= "Bridge PCI busn";
+	bc->busn.start		= 0;
+	bc->busn.end		= 0xff;
+	bc->busn.flags		= IORESOURCE_BUS;
+
+	bc->domain		= domain;
+
+	pci_add_resource_offset(&host->windows, &bd->mem, bd->mem_offset);
+	pci_add_resource_offset(&host->windows, &bd->io, bd->io_offset);
+	pci_add_resource(&host->windows, &bc->busn);
+
+	err = devm_request_pci_bus_resources(dev, &host->windows);
+	if (err < 0)
+		goto err_free_resource;
+
+	bc->nasid = bd->nasid;
+
+	bc->baddr = (u64)bd->masterwid << 60 | PCI64_ATTR_BAR;
+	bc->base = (struct bridge_regs *)bd->bridge_addr;
+	bc->intr_addr = bd->intr_addr;
+
+	/*
+	 * Clear all pending interrupts.
+	 */
+	bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
+
+	/*
+	 * Until otherwise set up, assume all interrupts are from slot 0
+	 */
+	bridge_write(bc, b_int_device, 0x0);
+
+	/*
+	 * disable swapping for big windows
+	 */
+	bridge_clr(bc, b_wid_control,
+		   BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP);
+#ifdef CONFIG_PAGE_SIZE_4KB
+	bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
+#else /* 16kB or larger */
+	bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
+#endif
+
+	/*
+	 * Hmm...  IRIX sets additional bits in the address which
+	 * are documented as reserved in the bridge docs.
+	 */
+	bridge_write(bc, b_wid_int_upper,
+		     ((bc->intr_addr >> 32) & 0xffff) | (bd->masterwid << 16));
+	bridge_write(bc, b_wid_int_lower, bc->intr_addr & 0xffffffff);
+	bridge_write(bc, b_dir_map, (bd->masterwid << 20));	/* DMA */
+	bridge_write(bc, b_int_enable, 0);
+
+	for (slot = 0; slot < 8; slot++) {
+		bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
+		bc->pci_int[slot][0] = -1;
+		bc->pci_int[slot][1] = -1;
+		/* default interrupt pin mapping */
+		bc->int_mapping[slot][0] = slot;
+		bc->int_mapping[slot][1] = slot ^ 4;
+	}
+	bridge_read(bc, b_wid_tflush);	  /* wait until Bridge PIO complete */
+
+	bridge_setup_board(bc, partnum);
+
+	host->dev.parent = dev;
+	host->sysdata = bc;
+	host->busnr = 0;
+	host->ops = &bridge_pci_ops;
+	host->map_irq = bridge_map_irq;
+	host->swizzle_irq = pci_common_swizzle;
+
+	err = pci_scan_root_bus_bridge(host);
+	if (err < 0)
+		goto err_free_resource;
+
+	pci_bus_claim_resources(host->bus);
+	pci_bus_add_devices(host->bus);
+
+	platform_set_drvdata(pdev, host->bus);
+
+	return 0;
+
+err_free_resource:
+	pci_free_resource_list(&host->windows);
+err_remove_domain:
+	irq_domain_remove(domain);
+	irq_domain_free_fwnode(fn);
+	return err;
+}
+
+static void bridge_remove(struct platform_device *pdev)
+{
+	struct pci_bus *bus = platform_get_drvdata(pdev);
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+	struct fwnode_handle *fn = bc->domain->fwnode;
+
+	irq_domain_remove(bc->domain);
+	irq_domain_free_fwnode(fn);
+	pci_lock_rescan_remove();
+	pci_stop_root_bus(bus);
+	pci_remove_root_bus(bus);
+	pci_unlock_rescan_remove();
+}
+
+static struct platform_driver bridge_driver = {
+	.probe = bridge_probe,
+	.remove_new = bridge_remove,
+	.driver = {
+		.name = "xtalk-bridge",
+	}
+};
+
+builtin_platform_driver(bridge_driver);