Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 377 insertions, 0 deletions

diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
new file mode 100644
index 0000000000..9cf7fb6044
--- /dev/null
+++ b/arch/openrisc/kernel/setup.c
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC setup.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/initrd.h>
+#include <linux/of_fdt.h>
+#include <linux/of.h>
+#include <linux/device.h>
+
+#include <asm/sections.h>
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/cpuinfo.h>
+#include <asm/delay.h>
+
+#include "vmlinux.h"
+
+static void __init setup_memory(void)
+{
+	unsigned long ram_start_pfn;
+	unsigned long ram_end_pfn;
+	phys_addr_t memory_start, memory_end;
+
+	memory_end = memory_start = 0;
+
+	/* Find main memory where is the kernel, we assume its the only one */
+	memory_start = memblock_start_of_DRAM();
+	memory_end = memblock_end_of_DRAM();
+
+	if (!memory_end) {
+		panic("No memory!");
+	}
+
+	ram_start_pfn = PFN_UP(memory_start);
+	ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
+
+	/* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
+	min_low_pfn = ram_start_pfn;
+	max_low_pfn = ram_end_pfn;
+	max_pfn = ram_end_pfn;
+
+	/*
+	 * initialize the boot-time allocator (with low memory only).
+	 *
+	 * This makes the memory from the end of the kernel to the end of
+	 * RAM usable.
+	 */
+	memblock_reserve(__pa(_stext), _end - _stext);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* Then reserve the initrd, if any */
+	if (initrd_start && (initrd_end > initrd_start)) {
+		unsigned long aligned_start = ALIGN_DOWN(initrd_start, PAGE_SIZE);
+		unsigned long aligned_end = ALIGN(initrd_end, PAGE_SIZE);
+
+		memblock_reserve(__pa(aligned_start), aligned_end - aligned_start);
+	}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+	early_init_fdt_reserve_self();
+	early_init_fdt_scan_reserved_mem();
+
+	memblock_dump_all();
+}
+
+struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS];
+
+static void print_cpuinfo(void)
+{
+	unsigned long upr = mfspr(SPR_UPR);
+	unsigned long vr = mfspr(SPR_VR);
+	unsigned int version;
+	unsigned int revision;
+	struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
+
+	version = (vr & SPR_VR_VER) >> 24;
+	revision = (vr & SPR_VR_REV);
+
+	printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
+	       version, revision, cpuinfo->clock_frequency / 1000000);
+
+	if (!(upr & SPR_UPR_UP)) {
+		printk(KERN_INFO
+		       "-- no UPR register... unable to detect configuration\n");
+		return;
+	}
+
+	if (upr & SPR_UPR_DCP)
+		printk(KERN_INFO
+		       "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
+		       cpuinfo->dcache_size, cpuinfo->dcache_block_size,
+		       cpuinfo->dcache_ways);
+	else
+		printk(KERN_INFO "-- dcache disabled\n");
+	if (upr & SPR_UPR_ICP)
+		printk(KERN_INFO
+		       "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
+		       cpuinfo->icache_size, cpuinfo->icache_block_size,
+		       cpuinfo->icache_ways);
+	else
+		printk(KERN_INFO "-- icache disabled\n");
+
+	if (upr & SPR_UPR_DMP)
+		printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
+		       1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
+		       1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
+	if (upr & SPR_UPR_IMP)
+		printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
+		       1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
+		       1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
+
+	printk(KERN_INFO "-- additional features:\n");
+	if (upr & SPR_UPR_DUP)
+		printk(KERN_INFO "-- debug unit\n");
+	if (upr & SPR_UPR_PCUP)
+		printk(KERN_INFO "-- performance counters\n");
+	if (upr & SPR_UPR_PMP)
+		printk(KERN_INFO "-- power management\n");
+	if (upr & SPR_UPR_PICP)
+		printk(KERN_INFO "-- PIC\n");
+	if (upr & SPR_UPR_TTP)
+		printk(KERN_INFO "-- timer\n");
+	if (upr & SPR_UPR_CUP)
+		printk(KERN_INFO "-- custom unit(s)\n");
+}
+
+void __init setup_cpuinfo(void)
+{
+	struct device_node *cpu;
+	unsigned long iccfgr, dccfgr;
+	unsigned long cache_set_size;
+	int cpu_id = smp_processor_id();
+	struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu_id];
+
+	cpu = of_get_cpu_node(cpu_id, NULL);
+	if (!cpu)
+		panic("Couldn't find CPU%d in device tree...\n", cpu_id);
+
+	iccfgr = mfspr(SPR_ICCFGR);
+	cpuinfo->icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
+	cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
+	cpuinfo->icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
+	cpuinfo->icache_size =
+	    cache_set_size * cpuinfo->icache_ways * cpuinfo->icache_block_size;
+
+	dccfgr = mfspr(SPR_DCCFGR);
+	cpuinfo->dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
+	cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
+	cpuinfo->dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
+	cpuinfo->dcache_size =
+	    cache_set_size * cpuinfo->dcache_ways * cpuinfo->dcache_block_size;
+
+	if (of_property_read_u32(cpu, "clock-frequency",
+				 &cpuinfo->clock_frequency)) {
+		printk(KERN_WARNING
+		       "Device tree missing CPU 'clock-frequency' parameter."
+		       "Assuming frequency 25MHZ"
+		       "This is probably not what you want.");
+	}
+
+	cpuinfo->coreid = mfspr(SPR_COREID);
+
+	of_node_put(cpu);
+
+	print_cpuinfo();
+}
+
+/**
+ * or1k_early_setup
+ * @fdt: pointer to the start of the device tree in memory or NULL
+ *
+ * Handles the pointer to the device tree that this kernel is to use
+ * for establishing the available platform devices.
+ *
+ * Falls back on built-in device tree in case null pointer is passed.
+ */
+
+void __init or1k_early_setup(void *fdt)
+{
+	if (fdt)
+		pr_info("FDT at %p\n", fdt);
+	else {
+		fdt = __dtb_start;
+		pr_info("Compiled-in FDT at %p\n", fdt);
+	}
+	early_init_devtree(fdt);
+}
+
+static inline unsigned long extract_value_bits(unsigned long reg,
+					       short bit_nr, short width)
+{
+	return (reg >> bit_nr) & (0 << width);
+}
+
+static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
+{
+	while (!(mask & 0x1)) {
+		reg = reg >> 1;
+		mask = mask >> 1;
+	}
+	return mask & reg;
+}
+
+/*
+ * calibrate_delay
+ *
+ * Lightweight calibrate_delay implementation that calculates loops_per_jiffy
+ * from the clock frequency passed in via the device tree
+ *
+ */
+
+void calibrate_delay(void)
+{
+	const int *val;
+	struct device_node *cpu = of_get_cpu_node(smp_processor_id(), NULL);
+
+	val = of_get_property(cpu, "clock-frequency", NULL);
+	if (!val)
+		panic("no cpu 'clock-frequency' parameter in device tree");
+	loops_per_jiffy = *val / HZ;
+	pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
+		loops_per_jiffy / (500000 / HZ),
+		(loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
+
+	of_node_put(cpu);
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+	unflatten_and_copy_device_tree();
+
+	setup_cpuinfo();
+
+#ifdef CONFIG_SMP
+	smp_init_cpus();
+#endif
+
+	/* process 1's initial memory region is the kernel code/data */
+	setup_initial_init_mm(_stext, _etext, _edata, _end);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start == initrd_end) {
+		printk(KERN_INFO "Initial ramdisk not found\n");
+		initrd_start = 0;
+		initrd_end = 0;
+	} else {
+		printk(KERN_INFO "Initial ramdisk at: 0x%p (%lu bytes)\n",
+		       (void *)(initrd_start), initrd_end - initrd_start);
+		initrd_below_start_ok = 1;
+	}
+#endif
+
+	/* setup memblock allocator */
+	setup_memory();
+
+	/* paging_init() sets up the MMU and marks all pages as reserved */
+	paging_init();
+
+	*cmdline_p = boot_command_line;
+
+	printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
+}
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	unsigned int vr, cpucfgr;
+	unsigned int avr;
+	unsigned int version;
+	struct cpuinfo_or1k *cpuinfo = v;
+
+	vr = mfspr(SPR_VR);
+	cpucfgr = mfspr(SPR_CPUCFGR);
+
+#ifdef CONFIG_SMP
+	seq_printf(m, "processor\t\t: %d\n", cpuinfo->coreid);
+#endif
+	if (vr & SPR_VR_UVRP) {
+		vr = mfspr(SPR_VR2);
+		version = vr & SPR_VR2_VER;
+		avr = mfspr(SPR_AVR);
+		seq_printf(m, "cpu architecture\t: "
+			   "OpenRISC 1000 (%d.%d-rev%d)\n",
+			   (avr >> 24) & 0xff,
+			   (avr >> 16) & 0xff,
+			   (avr >> 8) & 0xff);
+		seq_printf(m, "cpu implementation id\t: 0x%x\n",
+			   (vr & SPR_VR2_CPUID) >> 24);
+		seq_printf(m, "cpu version\t\t: 0x%x\n", version);
+	} else {
+		version = (vr & SPR_VR_VER) >> 24;
+		seq_printf(m, "cpu\t\t\t: OpenRISC-%x\n", version);
+		seq_printf(m, "revision\t\t: %d\n", vr & SPR_VR_REV);
+	}
+	seq_printf(m, "frequency\t\t: %ld\n", loops_per_jiffy * HZ);
+	seq_printf(m, "dcache size\t\t: %d bytes\n", cpuinfo->dcache_size);
+	seq_printf(m, "dcache block size\t: %d bytes\n",
+		   cpuinfo->dcache_block_size);
+	seq_printf(m, "dcache ways\t\t: %d\n", cpuinfo->dcache_ways);
+	seq_printf(m, "icache size\t\t: %d bytes\n", cpuinfo->icache_size);
+	seq_printf(m, "icache block size\t: %d bytes\n",
+		   cpuinfo->icache_block_size);
+	seq_printf(m, "icache ways\t\t: %d\n", cpuinfo->icache_ways);
+	seq_printf(m, "immu\t\t\t: %d entries, %lu ways\n",
+		   1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
+		   1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
+	seq_printf(m, "dmmu\t\t\t: %d entries, %lu ways\n",
+		   1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
+		   1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
+	seq_printf(m, "bogomips\t\t: %lu.%02lu\n",
+		   (loops_per_jiffy * HZ) / 500000,
+		   ((loops_per_jiffy * HZ) / 5000) % 100);
+
+	seq_puts(m, "features\t\t: ");
+	seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB32S ? "orbis32" : "");
+	seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB64S ? "orbis64" : "");
+	seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF32S ? "orfpx32" : "");
+	seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF64S ? "orfpx64" : "");
+	seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OV64S ? "orvdx64" : "");
+	seq_puts(m, "\n");
+
+	seq_puts(m, "\n");
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	*pos = cpumask_next(*pos - 1, cpu_online_mask);
+	if ((*pos) < nr_cpu_ids)
+		return &cpuinfo_or1k[*pos];
+	return NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	(*pos)++;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start = c_start,
+	.next = c_next,
+	.stop = c_stop,
+	.show = show_cpuinfo,
+};