Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 134 insertions, 0 deletions

diff --git a/arch/powerpc/mm/book3s32/mmu_context.c b/arch/powerpc/mm/book3s32/mmu_context.c
new file mode 100644
index 0000000000..1922f9a6b0
--- /dev/null
+++ b/arch/powerpc/mm/book3s32/mmu_context.c
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains the routines for handling the MMU on those
+ * PowerPC implementations where the MMU substantially follows the
+ * architecture specification.  This includes the 6xx, 7xx, 7xxx,
+ * and 8260 implementations but excludes the 8xx and 4xx.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/export.h>
+
+#include <asm/mmu_context.h>
+
+/*
+ * Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+void *abatron_pteptrs[2];
+
+/*
+ * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
+ * (virtual segment identifiers) for each context.  Although the
+ * hardware supports 24-bit VSIDs, and thus >1 million contexts,
+ * we only use 32,768 of them.  That is ample, since there can be
+ * at most around 30,000 tasks in the system anyway, and it means
+ * that we can use a bitmap to indicate which contexts are in use.
+ * Using a bitmap means that we entirely avoid all of the problems
+ * that we used to have when the context number overflowed,
+ * particularly on SMP systems.
+ *  -- paulus.
+ */
+#define NO_CONTEXT      	((unsigned long) -1)
+#define LAST_CONTEXT    	32767
+#define FIRST_CONTEXT    	1
+
+static unsigned long next_mmu_context;
+static unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+
+unsigned long __init_new_context(void)
+{
+	unsigned long ctx = next_mmu_context;
+
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+
+	return ctx;
+}
+EXPORT_SYMBOL_GPL(__init_new_context);
+
+/*
+ * Set up the context for a new address space.
+ */
+int init_new_context(struct task_struct *t, struct mm_struct *mm)
+{
+	mm->context.id = __init_new_context();
+	mm->context.sr0 = CTX_TO_VSID(mm->context.id, 0);
+
+	if (IS_ENABLED(CONFIG_PPC_KUEP))
+		mm->context.sr0 |= SR_NX;
+	if (!kuap_is_disabled())
+		mm->context.sr0 |= SR_KS;
+
+	return 0;
+}
+
+/*
+ * Free a context ID. Make sure to call this with preempt disabled!
+ */
+void __destroy_context(unsigned long ctx)
+{
+	clear_bit(ctx, context_map);
+}
+EXPORT_SYMBOL_GPL(__destroy_context);
+
+/*
+ * We're finished using the context for an address space.
+ */
+void destroy_context(struct mm_struct *mm)
+{
+	preempt_disable();
+	if (mm->context.id != NO_CONTEXT) {
+		__destroy_context(mm->context.id);
+		mm->context.id = NO_CONTEXT;
+	}
+	preempt_enable();
+}
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init mmu_context_init(void)
+{
+	/* Reserve context 0 for kernel use */
+	context_map[0] = (1 << FIRST_CONTEXT) - 1;
+	next_mmu_context = FIRST_CONTEXT;
+}
+
+void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+	long id = next->context.id;
+
+	if (id < 0)
+		panic("mm_struct %p has no context ID", next);
+
+	isync();
+
+	update_user_segments(next->context.sr0);
+
+	if (IS_ENABLED(CONFIG_BDI_SWITCH))
+		abatron_pteptrs[1] = next->pgd;
+
+	if (!mmu_has_feature(MMU_FTR_HPTE_TABLE))
+		mtspr(SPRN_SDR1, rol32(__pa(next->pgd), 4) & 0xffff01ff);
+
+	mb();	/* sync */
+	isync();
+}
+EXPORT_SYMBOL(switch_mmu_context);