Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 726 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/powernv/opal-fadump.c b/arch/powerpc/platforms/powernv/opal-fadump.c
new file mode 100644
index 0000000000..964f464b1b
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-fadump.c
@@ -0,0 +1,726 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Firmware-Assisted Dump support on POWER platform (OPAL).
+ *
+ * Copyright 2019, Hari Bathini, IBM Corporation.
+ */
+
+#define pr_fmt(fmt) "opal fadump: " fmt
+
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/libfdt.h>
+#include <linux/mm.h>
+#include <linux/crash_dump.h>
+
+#include <asm/page.h>
+#include <asm/opal.h>
+#include <asm/fadump-internal.h>
+
+#include "opal-fadump.h"
+
+
+#ifdef CONFIG_PRESERVE_FA_DUMP
+/*
+ * When dump is active but PRESERVE_FA_DUMP is enabled on the kernel,
+ * ensure crash data is preserved in hope that the subsequent memory
+ * preserving kernel boot is going to process this crash data.
+ */
+void __init opal_fadump_dt_scan(struct fw_dump *fadump_conf, u64 node)
+{
+	const struct opal_fadump_mem_struct *opal_fdm_active;
+	const __be32 *prop;
+	unsigned long dn;
+	u64 addr = 0;
+	s64 ret;
+
+	dn = of_get_flat_dt_subnode_by_name(node, "dump");
+	if (dn == -FDT_ERR_NOTFOUND)
+		return;
+
+	/*
+	 * Check if dump has been initiated on last reboot.
+	 */
+	prop = of_get_flat_dt_prop(dn, "mpipl-boot", NULL);
+	if (!prop)
+		return;
+
+	ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_KERNEL, &addr);
+	if ((ret != OPAL_SUCCESS) || !addr) {
+		pr_debug("Could not get Kernel metadata (%lld)\n", ret);
+		return;
+	}
+
+	/*
+	 * Preserve memory only if kernel memory regions are registered
+	 * with f/w for MPIPL.
+	 */
+	addr = be64_to_cpu(addr);
+	pr_debug("Kernel metadata addr: %llx\n", addr);
+	opal_fdm_active = (void *)addr;
+	if (be16_to_cpu(opal_fdm_active->registered_regions) == 0)
+		return;
+
+	ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_BOOT_MEM, &addr);
+	if ((ret != OPAL_SUCCESS) || !addr) {
+		pr_err("Failed to get boot memory tag (%lld)\n", ret);
+		return;
+	}
+
+	/*
+	 * Memory below this address can be used for booting a
+	 * capture kernel or petitboot kernel. Preserve everything
+	 * above this address for processing crashdump.
+	 */
+	fadump_conf->boot_mem_top = be64_to_cpu(addr);
+	pr_debug("Preserve everything above %llx\n", fadump_conf->boot_mem_top);
+
+	pr_info("Firmware-assisted dump is active.\n");
+	fadump_conf->dump_active = 1;
+}
+
+#else /* CONFIG_PRESERVE_FA_DUMP */
+static const struct opal_fadump_mem_struct *opal_fdm_active;
+static const struct opal_mpipl_fadump *opal_cpu_metadata;
+static struct opal_fadump_mem_struct *opal_fdm;
+
+#ifdef CONFIG_OPAL_CORE
+extern bool kernel_initiated;
+#endif
+
+static int opal_fadump_unregister(struct fw_dump *fadump_conf);
+
+static void opal_fadump_update_config(struct fw_dump *fadump_conf,
+				      const struct opal_fadump_mem_struct *fdm)
+{
+	pr_debug("Boot memory regions count: %d\n", be16_to_cpu(fdm->region_cnt));
+
+	/*
+	 * The destination address of the first boot memory region is the
+	 * destination address of boot memory regions.
+	 */
+	fadump_conf->boot_mem_dest_addr = be64_to_cpu(fdm->rgn[0].dest);
+	pr_debug("Destination address of boot memory regions: %#016llx\n",
+		 fadump_conf->boot_mem_dest_addr);
+
+	fadump_conf->fadumphdr_addr = be64_to_cpu(fdm->fadumphdr_addr);
+}
+
+/*
+ * This function is called in the capture kernel to get configuration details
+ * from metadata setup by the first kernel.
+ */
+static void __init opal_fadump_get_config(struct fw_dump *fadump_conf,
+				   const struct opal_fadump_mem_struct *fdm)
+{
+	unsigned long base, size, last_end, hole_size;
+	int i;
+
+	if (!fadump_conf->dump_active)
+		return;
+
+	last_end = 0;
+	hole_size = 0;
+	fadump_conf->boot_memory_size = 0;
+
+	pr_debug("Boot memory regions:\n");
+	for (i = 0; i < be16_to_cpu(fdm->region_cnt); i++) {
+		base = be64_to_cpu(fdm->rgn[i].src);
+		size = be64_to_cpu(fdm->rgn[i].size);
+		pr_debug("\t[%03d] base: 0x%lx, size: 0x%lx\n", i, base, size);
+
+		fadump_conf->boot_mem_addr[i] = base;
+		fadump_conf->boot_mem_sz[i] = size;
+		fadump_conf->boot_memory_size += size;
+		hole_size += (base - last_end);
+
+		last_end = base + size;
+	}
+
+	/*
+	 * Start address of reserve dump area (permanent reservation) for
+	 * re-registering FADump after dump capture.
+	 */
+	fadump_conf->reserve_dump_area_start = be64_to_cpu(fdm->rgn[0].dest);
+
+	/*
+	 * Rarely, but it can so happen that system crashes before all
+	 * boot memory regions are registered for MPIPL. In such
+	 * cases, warn that the vmcore may not be accurate and proceed
+	 * anyway as that is the best bet considering free pages, cache
+	 * pages, user pages, etc are usually filtered out.
+	 *
+	 * Hope the memory that could not be preserved only has pages
+	 * that are usually filtered out while saving the vmcore.
+	 */
+	if (be16_to_cpu(fdm->region_cnt) > be16_to_cpu(fdm->registered_regions)) {
+		pr_warn("Not all memory regions were saved!!!\n");
+		pr_warn("  Unsaved memory regions:\n");
+		i = be16_to_cpu(fdm->registered_regions);
+		while (i < be16_to_cpu(fdm->region_cnt)) {
+			pr_warn("\t[%03d] base: 0x%llx, size: 0x%llx\n",
+				i, be64_to_cpu(fdm->rgn[i].src),
+				be64_to_cpu(fdm->rgn[i].size));
+			i++;
+		}
+
+		pr_warn("If the unsaved regions only contain pages that are filtered out (eg. free/user pages), the vmcore should still be usable.\n");
+		pr_warn("WARNING: If the unsaved regions contain kernel pages, the vmcore will be corrupted.\n");
+	}
+
+	fadump_conf->boot_mem_top = (fadump_conf->boot_memory_size + hole_size);
+	fadump_conf->boot_mem_regs_cnt = be16_to_cpu(fdm->region_cnt);
+	opal_fadump_update_config(fadump_conf, fdm);
+}
+
+/* Initialize kernel metadata */
+static void opal_fadump_init_metadata(struct opal_fadump_mem_struct *fdm)
+{
+	fdm->version = OPAL_FADUMP_VERSION;
+	fdm->region_cnt = cpu_to_be16(0);
+	fdm->registered_regions = cpu_to_be16(0);
+	fdm->fadumphdr_addr = cpu_to_be64(0);
+}
+
+static u64 opal_fadump_init_mem_struct(struct fw_dump *fadump_conf)
+{
+	u64 addr = fadump_conf->reserve_dump_area_start;
+	u16 reg_cnt;
+	int i;
+
+	opal_fdm = __va(fadump_conf->kernel_metadata);
+	opal_fadump_init_metadata(opal_fdm);
+
+	/* Boot memory regions */
+	reg_cnt = be16_to_cpu(opal_fdm->region_cnt);
+	for (i = 0; i < fadump_conf->boot_mem_regs_cnt; i++) {
+		opal_fdm->rgn[i].src	= cpu_to_be64(fadump_conf->boot_mem_addr[i]);
+		opal_fdm->rgn[i].dest	= cpu_to_be64(addr);
+		opal_fdm->rgn[i].size	= cpu_to_be64(fadump_conf->boot_mem_sz[i]);
+
+		reg_cnt++;
+		addr += fadump_conf->boot_mem_sz[i];
+	}
+	opal_fdm->region_cnt = cpu_to_be16(reg_cnt);
+
+	/*
+	 * Kernel metadata is passed to f/w and retrieved in capture kernel.
+	 * So, use it to save fadump header address instead of calculating it.
+	 */
+	opal_fdm->fadumphdr_addr = cpu_to_be64(be64_to_cpu(opal_fdm->rgn[0].dest) +
+					       fadump_conf->boot_memory_size);
+
+	opal_fadump_update_config(fadump_conf, opal_fdm);
+
+	return addr;
+}
+
+static u64 opal_fadump_get_metadata_size(void)
+{
+	return PAGE_ALIGN(sizeof(struct opal_fadump_mem_struct));
+}
+
+static int opal_fadump_setup_metadata(struct fw_dump *fadump_conf)
+{
+	int err = 0;
+	s64 ret;
+
+	/*
+	 * Use the last page(s) in FADump memory reservation for
+	 * kernel metadata.
+	 */
+	fadump_conf->kernel_metadata = (fadump_conf->reserve_dump_area_start +
+					fadump_conf->reserve_dump_area_size -
+					opal_fadump_get_metadata_size());
+	pr_info("Kernel metadata addr: %llx\n", fadump_conf->kernel_metadata);
+
+	/* Initialize kernel metadata before registering the address with f/w */
+	opal_fdm = __va(fadump_conf->kernel_metadata);
+	opal_fadump_init_metadata(opal_fdm);
+
+	/*
+	 * Register metadata address with f/w. Can be retrieved in
+	 * the capture kernel.
+	 */
+	ret = opal_mpipl_register_tag(OPAL_MPIPL_TAG_KERNEL,
+				      fadump_conf->kernel_metadata);
+	if (ret != OPAL_SUCCESS) {
+		pr_err("Failed to set kernel metadata tag!\n");
+		err = -EPERM;
+	}
+
+	/*
+	 * Register boot memory top address with f/w. Should be retrieved
+	 * by a kernel that intends to preserve crash'ed kernel's memory.
+	 */
+	ret = opal_mpipl_register_tag(OPAL_MPIPL_TAG_BOOT_MEM,
+				      fadump_conf->boot_mem_top);
+	if (ret != OPAL_SUCCESS) {
+		pr_err("Failed to set boot memory tag!\n");
+		err = -EPERM;
+	}
+
+	return err;
+}
+
+static u64 opal_fadump_get_bootmem_min(void)
+{
+	return OPAL_FADUMP_MIN_BOOT_MEM;
+}
+
+static int opal_fadump_register(struct fw_dump *fadump_conf)
+{
+	s64 rc = OPAL_PARAMETER;
+	u16 registered_regs;
+	int i, err = -EIO;
+
+	registered_regs = be16_to_cpu(opal_fdm->registered_regions);
+	for (i = 0; i < be16_to_cpu(opal_fdm->region_cnt); i++) {
+		rc = opal_mpipl_update(OPAL_MPIPL_ADD_RANGE,
+				       be64_to_cpu(opal_fdm->rgn[i].src),
+				       be64_to_cpu(opal_fdm->rgn[i].dest),
+				       be64_to_cpu(opal_fdm->rgn[i].size));
+		if (rc != OPAL_SUCCESS)
+			break;
+
+		registered_regs++;
+	}
+	opal_fdm->registered_regions = cpu_to_be16(registered_regs);
+
+	switch (rc) {
+	case OPAL_SUCCESS:
+		pr_info("Registration is successful!\n");
+		fadump_conf->dump_registered = 1;
+		err = 0;
+		break;
+	case OPAL_RESOURCE:
+		/* If MAX regions limit in f/w is hit, warn and proceed. */
+		pr_warn("%d regions could not be registered for MPIPL as MAX limit is reached!\n",
+			(be16_to_cpu(opal_fdm->region_cnt) -
+			 be16_to_cpu(opal_fdm->registered_regions)));
+		fadump_conf->dump_registered = 1;
+		err = 0;
+		break;
+	case OPAL_PARAMETER:
+		pr_err("Failed to register. Parameter Error(%lld).\n", rc);
+		break;
+	case OPAL_HARDWARE:
+		pr_err("Support not available.\n");
+		fadump_conf->fadump_supported = 0;
+		fadump_conf->fadump_enabled = 0;
+		break;
+	default:
+		pr_err("Failed to register. Unknown Error(%lld).\n", rc);
+		break;
+	}
+
+	/*
+	 * If some regions were registered before OPAL_MPIPL_ADD_RANGE
+	 * OPAL call failed, unregister all regions.
+	 */
+	if ((err < 0) && (be16_to_cpu(opal_fdm->registered_regions) > 0))
+		opal_fadump_unregister(fadump_conf);
+
+	return err;
+}
+
+static int opal_fadump_unregister(struct fw_dump *fadump_conf)
+{
+	s64 rc;
+
+	rc = opal_mpipl_update(OPAL_MPIPL_REMOVE_ALL, 0, 0, 0);
+	if (rc) {
+		pr_err("Failed to un-register - unexpected Error(%lld).\n", rc);
+		return -EIO;
+	}
+
+	opal_fdm->registered_regions = cpu_to_be16(0);
+	fadump_conf->dump_registered = 0;
+	return 0;
+}
+
+static int opal_fadump_invalidate(struct fw_dump *fadump_conf)
+{
+	s64 rc;
+
+	rc = opal_mpipl_update(OPAL_MPIPL_FREE_PRESERVED_MEMORY, 0, 0, 0);
+	if (rc) {
+		pr_err("Failed to invalidate - unexpected Error(%lld).\n", rc);
+		return -EIO;
+	}
+
+	fadump_conf->dump_active = 0;
+	opal_fdm_active = NULL;
+	return 0;
+}
+
+static void opal_fadump_cleanup(struct fw_dump *fadump_conf)
+{
+	s64 ret;
+
+	ret = opal_mpipl_register_tag(OPAL_MPIPL_TAG_KERNEL, 0);
+	if (ret != OPAL_SUCCESS)
+		pr_warn("Could not reset (%llu) kernel metadata tag!\n", ret);
+}
+
+/*
+ * Verify if CPU state data is available. If available, do a bit of sanity
+ * checking before processing this data.
+ */
+static bool __init is_opal_fadump_cpu_data_valid(struct fw_dump *fadump_conf)
+{
+	if (!opal_cpu_metadata)
+		return false;
+
+	fadump_conf->cpu_state_data_version =
+		be32_to_cpu(opal_cpu_metadata->cpu_data_version);
+	fadump_conf->cpu_state_entry_size =
+		be32_to_cpu(opal_cpu_metadata->cpu_data_size);
+	fadump_conf->cpu_state_dest_vaddr =
+		(u64)__va(be64_to_cpu(opal_cpu_metadata->region[0].dest));
+	fadump_conf->cpu_state_data_size =
+		be64_to_cpu(opal_cpu_metadata->region[0].size);
+
+	if (fadump_conf->cpu_state_data_version != HDAT_FADUMP_CPU_DATA_VER) {
+		pr_warn("Supported CPU state data version: %u, found: %d!\n",
+			HDAT_FADUMP_CPU_DATA_VER,
+			fadump_conf->cpu_state_data_version);
+		pr_warn("WARNING: F/W using newer CPU state data format!!\n");
+	}
+
+	if ((fadump_conf->cpu_state_dest_vaddr == 0) ||
+	    (fadump_conf->cpu_state_entry_size == 0) ||
+	    (fadump_conf->cpu_state_entry_size >
+	     fadump_conf->cpu_state_data_size)) {
+		pr_err("CPU state data is invalid. Ignoring!\n");
+		return false;
+	}
+
+	return true;
+}
+
+/*
+ * Convert CPU state data saved at the time of crash into ELF notes.
+ *
+ * While the crashing CPU's register data is saved by the kernel, CPU state
+ * data for all CPUs is saved by f/w. In CPU state data provided by f/w,
+ * each register entry is of 16 bytes, a numerical identifier along with
+ * a GPR/SPR flag in the first 8 bytes and the register value in the next
+ * 8 bytes. For more details refer to F/W documentation. If this data is
+ * missing or in unsupported format, append crashing CPU's register data
+ * saved by the kernel in the PT_NOTE, to have something to work with in
+ * the vmcore file.
+ */
+static int __init
+opal_fadump_build_cpu_notes(struct fw_dump *fadump_conf,
+			    struct fadump_crash_info_header *fdh)
+{
+	u32 thread_pir, size_per_thread, regs_offset, regs_cnt, reg_esize;
+	struct hdat_fadump_thread_hdr *thdr;
+	bool is_cpu_data_valid = false;
+	u32 num_cpus = 1, *note_buf;
+	struct pt_regs regs;
+	char *bufp;
+	int rc, i;
+
+	if (is_opal_fadump_cpu_data_valid(fadump_conf)) {
+		size_per_thread = fadump_conf->cpu_state_entry_size;
+		num_cpus = (fadump_conf->cpu_state_data_size / size_per_thread);
+		bufp = __va(fadump_conf->cpu_state_dest_vaddr);
+		is_cpu_data_valid = true;
+	}
+
+	rc = fadump_setup_cpu_notes_buf(num_cpus);
+	if (rc != 0)
+		return rc;
+
+	note_buf = (u32 *)fadump_conf->cpu_notes_buf_vaddr;
+	if (!is_cpu_data_valid)
+		goto out;
+
+	/*
+	 * Offset for register entries, entry size and registers count is
+	 * duplicated in every thread header in keeping with HDAT format.
+	 * Use these values from the first thread header.
+	 */
+	thdr = (struct hdat_fadump_thread_hdr *)bufp;
+	regs_offset = (offsetof(struct hdat_fadump_thread_hdr, offset) +
+		       be32_to_cpu(thdr->offset));
+	reg_esize = be32_to_cpu(thdr->esize);
+	regs_cnt  = be32_to_cpu(thdr->ecnt);
+
+	pr_debug("--------CPU State Data------------\n");
+	pr_debug("NumCpus     : %u\n", num_cpus);
+	pr_debug("\tOffset: %u, Entry size: %u, Cnt: %u\n",
+		 regs_offset, reg_esize, regs_cnt);
+
+	for (i = 0; i < num_cpus; i++, bufp += size_per_thread) {
+		thdr = (struct hdat_fadump_thread_hdr *)bufp;
+
+		thread_pir = be32_to_cpu(thdr->pir);
+		pr_debug("[%04d] PIR: 0x%x, core state: 0x%02x\n",
+			 i, thread_pir, thdr->core_state);
+
+		/*
+		 * If this is kernel initiated crash, crashing_cpu would be set
+		 * appropriately and register data of the crashing CPU saved by
+		 * crashing kernel. Add this saved register data of crashing CPU
+		 * to elf notes and populate the pt_regs for the remaining CPUs
+		 * from register state data provided by firmware.
+		 */
+		if (fdh->crashing_cpu == thread_pir) {
+			note_buf = fadump_regs_to_elf_notes(note_buf,
+							    &fdh->regs);
+			pr_debug("Crashing CPU PIR: 0x%x - R1 : 0x%lx, NIP : 0x%lx\n",
+				 fdh->crashing_cpu, fdh->regs.gpr[1],
+				 fdh->regs.nip);
+			continue;
+		}
+
+		/*
+		 * Register state data of MAX cores is provided by firmware,
+		 * but some of this cores may not be active. So, while
+		 * processing register state data, check core state and
+		 * skip threads that belong to inactive cores.
+		 */
+		if (thdr->core_state == HDAT_FADUMP_CORE_INACTIVE)
+			continue;
+
+		opal_fadump_read_regs((bufp + regs_offset), regs_cnt,
+				      reg_esize, true, &regs);
+		note_buf = fadump_regs_to_elf_notes(note_buf, &regs);
+		pr_debug("CPU PIR: 0x%x - R1 : 0x%lx, NIP : 0x%lx\n",
+			 thread_pir, regs.gpr[1], regs.nip);
+	}
+
+out:
+	/*
+	 * CPU state data is invalid/unsupported. Try appending crashing CPU's
+	 * register data, if it is saved by the kernel.
+	 */
+	if (fadump_conf->cpu_notes_buf_vaddr == (u64)note_buf) {
+		if (fdh->crashing_cpu == FADUMP_CPU_UNKNOWN) {
+			fadump_free_cpu_notes_buf();
+			return -ENODEV;
+		}
+
+		pr_warn("WARNING: appending only crashing CPU's register data\n");
+		note_buf = fadump_regs_to_elf_notes(note_buf, &(fdh->regs));
+	}
+
+	final_note(note_buf);
+
+	pr_debug("Updating elfcore header (%llx) with cpu notes\n",
+		 fdh->elfcorehdr_addr);
+	fadump_update_elfcore_header(__va(fdh->elfcorehdr_addr));
+	return 0;
+}
+
+static int __init opal_fadump_process(struct fw_dump *fadump_conf)
+{
+	struct fadump_crash_info_header *fdh;
+	int rc = -EINVAL;
+
+	if (!opal_fdm_active || !fadump_conf->fadumphdr_addr)
+		return rc;
+
+	/* Validate the fadump crash info header */
+	fdh = __va(fadump_conf->fadumphdr_addr);
+	if (fdh->magic_number != FADUMP_CRASH_INFO_MAGIC) {
+		pr_err("Crash info header is not valid.\n");
+		return rc;
+	}
+
+#ifdef CONFIG_OPAL_CORE
+	/*
+	 * If this is a kernel initiated crash, crashing_cpu would be set
+	 * appropriately and register data of the crashing CPU saved by
+	 * crashing kernel. Add this saved register data of crashing CPU
+	 * to elf notes and populate the pt_regs for the remaining CPUs
+	 * from register state data provided by firmware.
+	 */
+	if (fdh->crashing_cpu != FADUMP_CPU_UNKNOWN)
+		kernel_initiated = true;
+#endif
+
+	rc = opal_fadump_build_cpu_notes(fadump_conf, fdh);
+	if (rc)
+		return rc;
+
+	/*
+	 * We are done validating dump info and elfcore header is now ready
+	 * to be exported. set elfcorehdr_addr so that vmcore module will
+	 * export the elfcore header through '/proc/vmcore'.
+	 */
+	elfcorehdr_addr = fdh->elfcorehdr_addr;
+
+	return rc;
+}
+
+static void opal_fadump_region_show(struct fw_dump *fadump_conf,
+				    struct seq_file *m)
+{
+	const struct opal_fadump_mem_struct *fdm_ptr;
+	u64 dumped_bytes = 0;
+	int i;
+
+	if (fadump_conf->dump_active)
+		fdm_ptr = opal_fdm_active;
+	else
+		fdm_ptr = opal_fdm;
+
+	for (i = 0; i < be16_to_cpu(fdm_ptr->region_cnt); i++) {
+		/*
+		 * Only regions that are registered for MPIPL
+		 * would have dump data.
+		 */
+		if ((fadump_conf->dump_active) &&
+		    (i < be16_to_cpu(fdm_ptr->registered_regions)))
+			dumped_bytes = be64_to_cpu(fdm_ptr->rgn[i].size);
+
+		seq_printf(m, "DUMP: Src: %#016llx, Dest: %#016llx, ",
+			   be64_to_cpu(fdm_ptr->rgn[i].src),
+			   be64_to_cpu(fdm_ptr->rgn[i].dest));
+		seq_printf(m, "Size: %#llx, Dumped: %#llx bytes\n",
+			   be64_to_cpu(fdm_ptr->rgn[i].size), dumped_bytes);
+	}
+
+	/* Dump is active. Show preserved area start address. */
+	if (fadump_conf->dump_active) {
+		seq_printf(m, "\nMemory above %#016llx is reserved for saving crash dump\n",
+			   fadump_conf->boot_mem_top);
+	}
+}
+
+static void opal_fadump_trigger(struct fadump_crash_info_header *fdh,
+				const char *msg)
+{
+	int rc;
+
+	/*
+	 * Unlike on pSeries platform, logical CPU number is not provided
+	 * with architected register state data. So, store the crashing
+	 * CPU's PIR instead to plug the appropriate register data for
+	 * crashing CPU in the vmcore file.
+	 */
+	fdh->crashing_cpu = (u32)mfspr(SPRN_PIR);
+
+	rc = opal_cec_reboot2(OPAL_REBOOT_MPIPL, msg);
+	if (rc == OPAL_UNSUPPORTED) {
+		pr_emerg("Reboot type %d not supported.\n",
+			 OPAL_REBOOT_MPIPL);
+	} else if (rc == OPAL_HARDWARE)
+		pr_emerg("No backend support for MPIPL!\n");
+}
+
+static struct fadump_ops opal_fadump_ops = {
+	.fadump_init_mem_struct		= opal_fadump_init_mem_struct,
+	.fadump_get_metadata_size	= opal_fadump_get_metadata_size,
+	.fadump_setup_metadata		= opal_fadump_setup_metadata,
+	.fadump_get_bootmem_min		= opal_fadump_get_bootmem_min,
+	.fadump_register		= opal_fadump_register,
+	.fadump_unregister		= opal_fadump_unregister,
+	.fadump_invalidate		= opal_fadump_invalidate,
+	.fadump_cleanup			= opal_fadump_cleanup,
+	.fadump_process			= opal_fadump_process,
+	.fadump_region_show		= opal_fadump_region_show,
+	.fadump_trigger			= opal_fadump_trigger,
+};
+
+void __init opal_fadump_dt_scan(struct fw_dump *fadump_conf, u64 node)
+{
+	const __be32 *prop;
+	unsigned long dn;
+	__be64 be_addr;
+	u64 addr = 0;
+	int i, len;
+	s64 ret;
+
+	/*
+	 * Check if Firmware-Assisted Dump is supported. if yes, check
+	 * if dump has been initiated on last reboot.
+	 */
+	dn = of_get_flat_dt_subnode_by_name(node, "dump");
+	if (dn == -FDT_ERR_NOTFOUND) {
+		pr_debug("FADump support is missing!\n");
+		return;
+	}
+
+	if (!of_flat_dt_is_compatible(dn, "ibm,opal-dump")) {
+		pr_err("Support missing for this f/w version!\n");
+		return;
+	}
+
+	prop = of_get_flat_dt_prop(dn, "fw-load-area", &len);
+	if (prop) {
+		/*
+		 * Each f/w load area is an (address,size) pair,
+		 * 2 cells each, totalling 4 cells per range.
+		 */
+		for (i = 0; i < len / (sizeof(*prop) * 4); i++) {
+			u64 base, end;
+
+			base = of_read_number(prop + (i * 4) + 0, 2);
+			end = base;
+			end += of_read_number(prop + (i * 4) + 2, 2);
+			if (end > OPAL_FADUMP_MIN_BOOT_MEM) {
+				pr_err("F/W load area: 0x%llx-0x%llx\n",
+				       base, end);
+				pr_err("F/W version not supported!\n");
+				return;
+			}
+		}
+	}
+
+	fadump_conf->ops		= &opal_fadump_ops;
+	fadump_conf->fadump_supported	= 1;
+
+	/*
+	 * Firmware supports 32-bit field for size. Align it to PAGE_SIZE
+	 * and request firmware to copy multiple kernel boot memory regions.
+	 */
+	fadump_conf->max_copy_size = ALIGN_DOWN(U32_MAX, PAGE_SIZE);
+
+	/*
+	 * Check if dump has been initiated on last reboot.
+	 */
+	prop = of_get_flat_dt_prop(dn, "mpipl-boot", NULL);
+	if (!prop)
+		return;
+
+	ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_KERNEL, &be_addr);
+	if ((ret != OPAL_SUCCESS) || !be_addr) {
+		pr_err("Failed to get Kernel metadata (%lld)\n", ret);
+		return;
+	}
+
+	addr = be64_to_cpu(be_addr);
+	pr_debug("Kernel metadata addr: %llx\n", addr);
+
+	opal_fdm_active = __va(addr);
+	if (opal_fdm_active->version != OPAL_FADUMP_VERSION) {
+		pr_warn("Supported kernel metadata version: %u, found: %d!\n",
+			OPAL_FADUMP_VERSION, opal_fdm_active->version);
+		pr_warn("WARNING: Kernel metadata format mismatch identified! Core file maybe corrupted..\n");
+	}
+
+	/* Kernel regions not registered with f/w for MPIPL */
+	if (be16_to_cpu(opal_fdm_active->registered_regions) == 0) {
+		opal_fdm_active = NULL;
+		return;
+	}
+
+	ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_CPU, &be_addr);
+	if (be_addr) {
+		addr = be64_to_cpu(be_addr);
+		pr_debug("CPU metadata addr: %llx\n", addr);
+		opal_cpu_metadata = __va(addr);
+	}
+
+	pr_info("Firmware-assisted dump is active.\n");
+	fadump_conf->dump_active = 1;
+	opal_fadump_get_config(fadump_conf, opal_fdm_active);
+}
+#endif /* !CONFIG_PRESERVE_FA_DUMP */