diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-06-19 21:00:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-06-19 21:00:51 +0000 |
commit | 6d03a247468059b0e59c821ef39e6762d4d6fc30 (patch) | |
tree | 17b9c00de2c62e68c965c742cdbc206f77a375da /arch/riscv/boot/dts/starfive | |
parent | Releasing progress-linux version 6.8.12-1~progress7.99u1. (diff) | |
download | linux-6d03a247468059b0e59c821ef39e6762d4d6fc30.tar.xz linux-6d03a247468059b0e59c821ef39e6762d4d6fc30.zip |
Merging upstream version 6.9.2.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/riscv/boot/dts/starfive')
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts | 11 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100-common.dtsi | 108 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts | 22 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100.dtsi | 45 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 71 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110.dtsi | 76 |
6 files changed, 332 insertions, 1 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts index 7cda3a8902..168f5d9895 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts +++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts @@ -11,3 +11,14 @@ model = "BeagleV Starlight Beta"; compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100"; }; + +&gmac { + phy-handle = <&phy>; +}; + +&mdio { + phy: ethernet-phy@7 { + reg = <7>; + reset-gpios = <&gpio 63 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi index 42fb61c360..ae1a6aeb0a 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi @@ -72,7 +72,91 @@ }; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; +}; + &gpio { + gmac_pins: gmac-0 { + gtxclk-pins { + pins = <PAD_FUNC_SHARE(115)>; + bias-pull-up; + drive-strength = <35>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + miitxclk-pins { + pins = <PAD_FUNC_SHARE(116)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + tx-pins { + pins = <PAD_FUNC_SHARE(117)>, + <PAD_FUNC_SHARE(119)>, + <PAD_FUNC_SHARE(120)>, + <PAD_FUNC_SHARE(121)>, + <PAD_FUNC_SHARE(122)>, + <PAD_FUNC_SHARE(123)>, + <PAD_FUNC_SHARE(124)>, + <PAD_FUNC_SHARE(125)>, + <PAD_FUNC_SHARE(126)>; + bias-pull-up; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + rxclk-pins { + pins = <PAD_FUNC_SHARE(127)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <6>; + }; + rxer-pins { + pins = <PAD_FUNC_SHARE(129)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + rx-pins { + pins = <PAD_FUNC_SHARE(128)>, + <PAD_FUNC_SHARE(130)>, + <PAD_FUNC_SHARE(131)>, + <PAD_FUNC_SHARE(132)>, + <PAD_FUNC_SHARE(133)>, + <PAD_FUNC_SHARE(134)>, + <PAD_FUNC_SHARE(135)>, + <PAD_FUNC_SHARE(136)>, + <PAD_FUNC_SHARE(137)>, + <PAD_FUNC_SHARE(138)>, + <PAD_FUNC_SHARE(139)>, + <PAD_FUNC_SHARE(140)>, + <PAD_FUNC_SHARE(141)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + i2c0_pins: i2c0-0 { i2c-pins { pinmux = <GPIOMUX(62, GPO_LOW, @@ -115,6 +199,24 @@ }; }; + pwm_pins: pwm-0 { + pwm-pins { + pinmux = <GPIOMUX(7, + GPO_PWM_PAD_OUT_BIT0, + GPO_PWM_PAD_OE_N_BIT0, + GPI_NONE)>, + <GPIOMUX(5, + GPO_PWM_PAD_OUT_BIT1, + GPO_PWM_PAD_OE_N_BIT1, + GPI_NONE)>; + bias-disable; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + sdio0_pins: sdio0-0 { clk-pins { pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT, @@ -257,6 +359,12 @@ clock-frequency = <27000000>; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + &sdio0 { broken-cd; bus-width = <4>; diff --git a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts index e82af72f1a..692c696e1a 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts +++ b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts @@ -6,7 +6,6 @@ /dts-v1/; #include "jh7100-common.dtsi" -#include <dt-bindings/gpio/gpio.h> / { model = "StarFive VisionFive V1"; @@ -18,3 +17,24 @@ priority = <224>; }; }; + +&gmac { + phy-handle = <&phy>; +}; + +/* + * The board uses a Motorcomm YT8521 PHY supporting RGMII-ID, but requires + * manual adjustment of the RX internal delay to work properly. The default + * RX delay provided by the driver (1.95ns) is too high, but applying a 50% + * reduction seems to mitigate the issue. + * + * It is worth noting the adjustment is not necessary on BeagleV Starlight SBC, + * which uses a Microchip PHY. Hence, most likely the Motorcomm PHY is the one + * responsible for the misbehaviour, not the GMAC. + */ +&mdio { + phy: ethernet-phy@0 { + reg = <0>; + rx-internal-delay-ps = <900>; + }; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi index 5d499d8aa8..9a2e9583af 100644 --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi @@ -208,6 +208,37 @@ status = "disabled"; }; + gmac: ethernet@10020000 { + compatible = "starfive,jh7100-dwmac", "snps,dwmac"; + reg = <0x0 0x10020000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_GMAC_ROOT_DIV>, + <&clkgen JH7100_CLK_GMAC_AHB>, + <&clkgen JH7100_CLK_GMAC_PTP_REF>, + <&clkgen JH7100_CLK_GMAC_TX_INV>, + <&clkgen JH7100_CLK_GMAC_GTX>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "gtx"; + resets = <&rstgen JH7100_RSTN_GMAC_AHB>; + reset-names = "ahb"; + interrupts = <6>, <7>; + interrupt-names = "macirq", "eth_wake_irq"; + max-frame-size = <9000>; + snps,multicast-filter-bins = <32>; + snps,perfect-filter-entries = <128>; + starfive,syscon = <&sysmain 0x70 0>; + rx-fifo-depth = <32768>; + tx-fifo-depth = <16384>; + snps,axi-config = <&stmmac_axi_setup>; + snps,fixed-burst; + snps,force_thresh_dma_mode; + status = "disabled"; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <16>; + snps,rd_osr_lmt = <16>; + snps,blen = <256 128 64 32 0 0 0>; + }; + }; + clkgen: clock-controller@11800000 { compatible = "starfive,jh7100-clkgen"; reg = <0x0 0x11800000 0x0 0x10000>; @@ -222,6 +253,11 @@ #reset-cells = <1>; }; + sysmain: syscon@11850000 { + compatible = "starfive,jh7100-sysmain", "syscon"; + reg = <0x0 0x11850000 0x0 0x10000>; + }; + i2c0: i2c@118b0000 { compatible = "snps,designware-i2c"; reg = <0x0 0x118b0000 0x0 0x10000>; @@ -324,6 +360,15 @@ <&rstgen JH7100_RSTN_WDT>; }; + pwm: pwm@12490000 { + compatible = "starfive,jh7100-pwm", "opencores,pwm-v1"; + reg = <0x0 0x12490000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_PWM_APB>; + resets = <&rstgen JH7100_RSTN_PWM_APB>; + #pwm-cells = <3>; + status = "disabled"; + }; + sfctemp: temperature-sensor@124a0000 { compatible = "starfive,jh7100-temp"; reg = <0x0 0x124a0000 0x0 0x10000>; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index b89e9791ef..45b58b6f3d 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -125,6 +125,55 @@ clock-frequency = <49152000>; }; +&camss { + assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, + <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>; + assigned-clock-rates = <49500000>, <198000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + camss_from_csi2rx: endpoint { + remote-endpoint = <&csi2rx_to_camss>; + }; + }; + }; +}; + +&csi2rx { + assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>; + assigned-clock-rates = <297000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + /* remote MIPI sensor endpoint */ + }; + + port@1 { + reg = <1>; + + csi2rx_to_camss: endpoint { + remote-endpoint = <&camss_from_csi2rx>; + }; + }; + }; +}; + &gmac0 { phy-handle = <&phy0>; phy-mode = "rgmii-id"; @@ -323,6 +372,12 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; @@ -513,6 +568,22 @@ }; }; + pwm_pins: pwm-0 { + pwm-pins { + pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0, + GPOEN_SYS_PWM0_CHANNEL0, + GPI_NONE)>, + <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1, + GPOEN_SYS_PWM0_CHANNEL1, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + spi0_pins: spi0-0 { mosi-pins { pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 74ed3b9264..4a5708f7fc 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -829,6 +829,15 @@ status = "disabled"; }; + pwm: pwm@120d0000 { + compatible = "starfive,jh7110-pwm", "opencores,pwm-v1"; + reg = <0x0 0x120d0000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_PWM_APB>; + resets = <&syscrg JH7110_SYSRST_PWM_APB>; + #pwm-cells = <3>; + status = "disabled"; + }; + sfctemp: temperature-sensor@120e0000 { compatible = "starfive,jh7110-temp"; reg = <0x0 0x120e0000 0x0 0x10000>; @@ -1104,6 +1113,32 @@ #power-domain-cells = <1>; }; + csi2rx: csi@19800000 { + compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx"; + reg = <0x0 0x19800000 0x0 0x10000>; + clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>, + <&ispcrg JH7110_ISPCLK_VIN_APB>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF0>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF1>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF2>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF3>; + clock-names = "sys_clk", "p_clk", + "pixel_if0_clk", "pixel_if1_clk", + "pixel_if2_clk", "pixel_if3_clk"; + resets = <&ispcrg JH7110_ISPRST_VIN_SYS>, + <&ispcrg JH7110_ISPRST_VIN_APB>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF0>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF1>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF2>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF3>; + reset-names = "sys", "reg_bank", + "pixel_if0", "pixel_if1", + "pixel_if2", "pixel_if3"; + phys = <&csi_phy>; + phy-names = "dphy"; + status = "disabled"; + }; + ispcrg: clock-controller@19810000 { compatible = "starfive,jh7110-ispcrg"; reg = <0x0 0x19810000 0x0 0x10000>; @@ -1121,6 +1156,47 @@ power-domains = <&pwrc JH7110_PD_ISP>; }; + csi_phy: phy@19820000 { + compatible = "starfive,jh7110-dphy-rx"; + reg = <0x0 0x19820000 0x0 0x10000>; + clocks = <&ispcrg JH7110_ISPCLK_M31DPHY_CFG_IN>, + <&ispcrg JH7110_ISPCLK_M31DPHY_REF_IN>, + <&ispcrg JH7110_ISPCLK_M31DPHY_TX_ESC_LAN0>; + clock-names = "cfg", "ref", "tx"; + resets = <&ispcrg JH7110_ISPRST_M31DPHY_HW>, + <&ispcrg JH7110_ISPRST_M31DPHY_B09_AON>; + power-domains = <&aon_syscon JH7110_AON_PD_DPHY_RX>; + #phy-cells = <0>; + }; + + camss: isp@19840000 { + compatible = "starfive,jh7110-camss"; + reg = <0x0 0x19840000 0x0 0x10000>, + <0x0 0x19870000 0x0 0x30000>; + reg-names = "syscon", "isp"; + clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, + <&ispcrg JH7110_ISPCLK_ISPV2_TOP_WRAPPER_C>, + <&ispcrg JH7110_ISPCLK_DVP_INV>, + <&ispcrg JH7110_ISPCLK_VIN_P_AXI_WR>, + <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>, + <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>, + <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>; + clock-names = "apb_func", "wrapper_clk_c", "dvp_inv", + "axiwr", "mipi_rx0_pxl", "ispcore_2x", + "isp_axi"; + resets = <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_P>, + <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_C>, + <&ispcrg JH7110_ISPRST_VIN_P_AXI_RD>, + <&ispcrg JH7110_ISPRST_VIN_P_AXI_WR>, + <&syscrg JH7110_SYSRST_ISP_TOP>, + <&syscrg JH7110_SYSRST_ISP_TOP_AXI>; + reset-names = "wrapper_p", "wrapper_c", "axird", + "axiwr", "isp_top_n", "isp_top_axi"; + power-domains = <&pwrc JH7110_PD_ISP>; + interrupts = <92>, <87>, <90>, <88>; + status = "disabled"; + }; + voutcrg: clock-controller@295c0000 { compatible = "starfive,jh7110-voutcrg"; reg = <0x0 0x295c0000 0x0 0x10000>; |