Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 658 insertions, 0 deletions

diff --git a/arch/sh/kernel/cpu/shmobile/Makefile b/arch/sh/kernel/cpu/shmobile/Makefile
new file mode 100644
index 0000000000..7581d5f03c
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux/SuperH SH-Mobile backends.
+#
+
+# Power Management & Sleep mode
+obj-$(CONFIG_PM)	+= pm.o sleep.o
+obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
new file mode 100644
index 0000000000..b0f9c8f8fd
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/kernel/cpu/shmobile/cpuidle.c
+ *
+ * Cpuidle support code for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+#include <linux/cpuidle.h>
+#include <linux/export.h>
+#include <asm/suspend.h>
+#include <linux/uaccess.h>
+
+static unsigned long cpuidle_mode[] = {
+	SUSP_SH_SLEEP, /* regular sleep mode */
+	SUSP_SH_SLEEP | SUSP_SH_SF, /* sleep mode + self refresh */
+	SUSP_SH_STANDBY | SUSP_SH_SF, /* software standby mode + self refresh */
+};
+
+static int cpuidle_sleep_enter(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index)
+{
+	unsigned long allowed_mode = SUSP_SH_SLEEP;
+	int requested_state = index;
+	int allowed_state;
+	int k;
+
+	/* convert allowed mode to allowed state */
+	for (k = ARRAY_SIZE(cpuidle_mode) - 1; k > 0; k--)
+		if (cpuidle_mode[k] == allowed_mode)
+			break;
+
+	allowed_state = k;
+
+	/* take the following into account for sleep mode selection:
+	 * - allowed_state: best mode allowed by hardware (clock deps)
+	 * - requested_state: best mode allowed by software (latencies)
+	 */
+	k = min_t(int, allowed_state, requested_state);
+
+	sh_mobile_call_standby(cpuidle_mode[k]);
+
+	return k;
+}
+
+static struct cpuidle_driver cpuidle_driver = {
+	.name   = "sh_idle",
+	.owner  = THIS_MODULE,
+	.states = {
+		{
+			.exit_latency = 1,
+			.target_residency = 1 * 2,
+			.power_usage = 3,
+			.enter = cpuidle_sleep_enter,
+			.name = "C1",
+			.desc = "SuperH Sleep Mode",
+		},
+		{
+			.exit_latency = 100,
+			.target_residency = 1 * 2,
+			.power_usage = 1,
+			.enter = cpuidle_sleep_enter,
+			.name = "C2",
+			.desc = "SuperH Sleep Mode [SF]",
+			.flags = CPUIDLE_FLAG_UNUSABLE,
+		},
+		{
+			.exit_latency = 2300,
+			.target_residency = 1 * 2,
+			.power_usage = 1,
+			.enter = cpuidle_sleep_enter,
+			.name = "C3",
+			.desc = "SuperH Mobile Standby Mode [SF]",
+			.flags = CPUIDLE_FLAG_UNUSABLE,
+		},
+	},
+	.safe_state_index = 0,
+	.state_count = 3,
+};
+
+int __init sh_mobile_setup_cpuidle(void)
+{
+	if (sh_mobile_sleep_supported & SUSP_SH_SF)
+		cpuidle_driver.states[1].flags = CPUIDLE_FLAG_NONE;
+
+	if (sh_mobile_sleep_supported & SUSP_SH_STANDBY)
+		cpuidle_driver.states[2].flags = CPUIDLE_FLAG_NONE;
+
+	return cpuidle_register(&cpuidle_driver, NULL);
+}
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
new file mode 100644
index 0000000000..ca9945f51e
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/kernel/cpu/shmobile/pm.c
+ *
+ * Power management support code for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <linux/uaccess.h>
+#include <asm/cacheflush.h>
+#include <asm/bl_bit.h>
+
+/*
+ * Notifier lists for pre/post sleep notification
+ */
+ATOMIC_NOTIFIER_HEAD(sh_mobile_pre_sleep_notifier_list);
+ATOMIC_NOTIFIER_HEAD(sh_mobile_post_sleep_notifier_list);
+
+/*
+ * Sleep modes available on SuperH Mobile:
+ *
+ * Sleep mode is just plain "sleep" instruction
+ * Sleep Self-Refresh mode is above plus RAM put in Self-Refresh
+ * Standby Self-Refresh mode is above plus stopped clocks
+ */
+#define SUSP_MODE_SLEEP		(SUSP_SH_SLEEP)
+#define SUSP_MODE_SLEEP_SF	(SUSP_SH_SLEEP | SUSP_SH_SF)
+#define SUSP_MODE_STANDBY_SF	(SUSP_SH_STANDBY | SUSP_SH_SF)
+#define SUSP_MODE_RSTANDBY_SF \
+	(SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_REGS | SUSP_SH_SF)
+ /*
+  * U-standby mode is unsupported since it needs bootloader hacks
+  */
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+#define RAM_BASE 0xfd800000 /* RSMEM */
+#else
+#define RAM_BASE 0xe5200000 /* ILRAM */
+#endif
+
+void sh_mobile_call_standby(unsigned long mode)
+{
+	void *onchip_mem = (void *)RAM_BASE;
+	struct sh_sleep_data *sdp = onchip_mem;
+	void (*standby_onchip_mem)(unsigned long, unsigned long);
+
+	/* code located directly after data structure */
+	standby_onchip_mem = (void *)(sdp + 1);
+
+	atomic_notifier_call_chain(&sh_mobile_pre_sleep_notifier_list,
+				   mode, NULL);
+
+	/* flush the caches if MMU flag is set */
+	if (mode & SUSP_SH_MMU)
+		flush_cache_all();
+
+	/* Let assembly snippet in on-chip memory handle the rest */
+	standby_onchip_mem(mode, RAM_BASE);
+
+	atomic_notifier_call_chain(&sh_mobile_post_sleep_notifier_list,
+				   mode, NULL);
+}
+
+extern char sh_mobile_sleep_enter_start;
+extern char sh_mobile_sleep_enter_end;
+
+extern char sh_mobile_sleep_resume_start;
+extern char sh_mobile_sleep_resume_end;
+
+unsigned long sh_mobile_sleep_supported = SUSP_SH_SLEEP;
+
+void sh_mobile_register_self_refresh(unsigned long flags,
+				     void *pre_start, void *pre_end,
+				     void *post_start, void *post_end)
+{
+	void *onchip_mem = (void *)RAM_BASE;
+	void *vp;
+	struct sh_sleep_data *sdp;
+	int n;
+
+	/* part 0: data area */
+	sdp = onchip_mem;
+	sdp->addr.stbcr = 0xa4150020; /* STBCR */
+	sdp->addr.bar = 0xa4150040; /* BAR */
+	sdp->addr.pteh = 0xff000000; /* PTEH */
+	sdp->addr.ptel = 0xff000004; /* PTEL */
+	sdp->addr.ttb = 0xff000008; /* TTB */
+	sdp->addr.tea = 0xff00000c; /* TEA */
+	sdp->addr.mmucr = 0xff000010; /* MMUCR */
+	sdp->addr.ptea = 0xff000034; /* PTEA */
+	sdp->addr.pascr = 0xff000070; /* PASCR */
+	sdp->addr.irmcr = 0xff000078; /* IRMCR */
+	sdp->addr.ccr = 0xff00001c; /* CCR */
+	sdp->addr.ramcr = 0xff000074; /* RAMCR */
+	vp = sdp + 1;
+
+	/* part 1: common code to enter sleep mode */
+	n = &sh_mobile_sleep_enter_end - &sh_mobile_sleep_enter_start;
+	memcpy(vp, &sh_mobile_sleep_enter_start, n);
+	vp += roundup(n, 4);
+
+	/* part 2: board specific code to enter self-refresh mode */
+	n = pre_end - pre_start;
+	memcpy(vp, pre_start, n);
+	sdp->sf_pre = (unsigned long)vp;
+	vp += roundup(n, 4);
+
+	/* part 3: board specific code to resume from self-refresh mode */
+	n = post_end - post_start;
+	memcpy(vp, post_start, n);
+	sdp->sf_post = (unsigned long)vp;
+	vp += roundup(n, 4);
+
+	/* part 4: common code to resume from sleep mode */
+	WARN_ON(vp > (onchip_mem + 0x600));
+	vp = onchip_mem + 0x600; /* located at interrupt vector */
+	n = &sh_mobile_sleep_resume_end - &sh_mobile_sleep_resume_start;
+	memcpy(vp, &sh_mobile_sleep_resume_start, n);
+	sdp->resume = (unsigned long)vp;
+
+	sh_mobile_sleep_supported |= flags;
+}
+
+static int sh_pm_enter(suspend_state_t state)
+{
+	if (!(sh_mobile_sleep_supported & SUSP_MODE_STANDBY_SF))
+		return -ENXIO;
+
+	local_irq_disable();
+	set_bl_bit();
+	sh_mobile_call_standby(SUSP_MODE_STANDBY_SF);
+	local_irq_disable();
+	clear_bl_bit();
+	return 0;
+}
+
+static const struct platform_suspend_ops sh_pm_ops = {
+	.enter          = sh_pm_enter,
+	.valid          = suspend_valid_only_mem,
+};
+
+static int __init sh_pm_init(void)
+{
+	suspend_set_ops(&sh_pm_ops);
+	return sh_mobile_setup_cpuidle();
+}
+
+late_initcall(sh_pm_init);
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
new file mode 100644
index 0000000000..f928c03151
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -0,0 +1,402 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
+ *
+ * Sleep mode and Standby modes support for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+
+/*
+ * Kernel mode register usage, see entry.S:
+ *	k0	scratch
+ *	k1	scratch
+ */
+#define k0	r0
+#define k1	r1
+
+/* manage self-refresh and enter standby mode. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(sh_mobile_sleep_enter_start)
+
+	/* save mode flags */
+	mov.l	r4, @(SH_SLEEP_MODE, r5)
+
+	/* save original vbr */
+	stc	vbr, r0
+	mov.l	r0, @(SH_SLEEP_VBR, r5)
+
+	/* point vbr to our on-chip memory page */
+	ldc	r5, vbr
+
+	/* save return address */
+	sts	pr, r0
+	mov.l	r0, @(SH_SLEEP_SPC, r5)
+
+	/* save sr */
+	stc	sr, r0
+	mov.l	r0, @(SH_SLEEP_SR, r5)
+
+	/* save general purpose registers to stack if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_REGS, r0
+	bt	skip_regs_save
+
+	sts.l	pr, @-r15
+	mov.l	r14, @-r15
+	mov.l	r13, @-r15
+	mov.l	r12, @-r15
+	mov.l	r11, @-r15
+	mov.l	r10, @-r15
+	mov.l	r9, @-r15
+	mov.l	r8, @-r15
+
+	/* make sure bank0 is selected, save low registers */
+	mov.l	rb_bit, r9
+	not	r9, r9
+	bsr	set_sr
+	 mov	#0, r10
+
+	bsr	save_low_regs
+	 nop
+
+	/* switch to bank 1, save low registers */
+	mov.l	rb_bit, r10
+	bsr	set_sr
+	 mov	#-1, r9
+
+	bsr	save_low_regs
+	 nop
+
+	/* switch back to bank 0 */
+	mov.l	rb_bit, r9
+	not	r9, r9
+	bsr	set_sr
+	 mov	#0, r10
+
+skip_regs_save:
+
+	/* save sp, also set to internal ram */
+	mov.l	r15, @(SH_SLEEP_SP, r5)
+	mov	r5, r15
+
+	/* save stbcr */
+	bsr     save_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
+
+	/* save mmu and cache context if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_MMU, r0
+	bt	skip_mmu_save_disable
+
+	/* save mmu state */
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEH, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEL, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_TTB, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_TEA, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEA, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PASCR, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_IRMCR, r0
+
+	/* invalidate TLBs and disable the MMU */
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+	mov	#4, r1
+	mov.l	r1, @r0
+	icbi	@r0
+
+	/* save cache registers and disable caches */
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_RAMCR, r0
+
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+	mov	#0, r1
+	mov.l	r1, @r0
+	icbi	@r0
+
+skip_mmu_save_disable:
+	/* call self-refresh entering code if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_SF, r0
+	bt	skip_set_sf
+
+	mov.l	@(SH_SLEEP_SF_PRE, r5), r0
+	jsr	@r0
+	 nop
+
+skip_set_sf:
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_STANDBY, r0
+	bt	test_rstandby
+
+	/* set mode to "software standby mode" */
+	bra	do_sleep
+	 mov	#0x80, r1
+
+test_rstandby:
+	tst	#SUSP_SH_RSTANDBY, r0
+	bt	test_ustandby
+
+	/* setup BAR register */
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_BAR, r0
+	mov.l	@(SH_SLEEP_RESUME, r5), r1
+	mov.l	r1, @r0
+
+	/* set mode to "r-standby mode" */
+	bra	do_sleep
+	 mov	#0x20, r1
+
+test_ustandby:
+	tst	#SUSP_SH_USTANDBY, r0
+	bt	force_sleep
+
+	/* set mode to "u-standby mode" */
+	bra	do_sleep
+	 mov	#0x10, r1
+
+force_sleep:
+
+	/* set mode to "sleep mode" */
+	mov	#0x00, r1
+
+do_sleep:
+	/* setup and enter selected standby mode */
+	bsr     get_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
+	mov.l	r1, @r0
+again:
+	sleep
+	bra	again
+	 nop
+
+save_register:
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r1
+	add	#-SH_SLEEP_BASE_ADDR, r0
+	mov.l	@r1, r1
+	add	#SH_SLEEP_BASE_DATA, r0
+	mov.l	r1, @(r0, r5)
+	add	#-SH_SLEEP_BASE_DATA, r0
+	rts
+	 nop
+
+get_register:
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r0
+	rts
+	 nop
+
+set_sr:
+	stc	sr, r8
+	and	r9, r8
+	or	r10, r8
+	ldc	r8, sr
+	rts
+	 nop
+
+save_low_regs:
+	mov.l	r7, @-r15
+	mov.l	r6, @-r15
+	mov.l	r5, @-r15
+	mov.l	r4, @-r15
+	mov.l	r3, @-r15
+	mov.l	r2, @-r15
+	mov.l	r1, @-r15
+	rts
+	 mov.l	r0, @-r15
+
+	.balign 4
+rb_bit:	.long	0x20000000 ! RB=1
+
+ENTRY(sh_mobile_sleep_enter_end)
+
+	.balign 4
+ENTRY(sh_mobile_sleep_resume_start)
+
+	/* figure out start address */
+	bsr	0f
+	 nop
+0:
+	sts	pr, k1
+	mov.l	1f, k0
+	and	k0, k1
+
+	/* store pointer to data area in VBR */
+	ldc	k1, vbr
+
+	/* setup sr with saved sr */
+	mov.l	@(SH_SLEEP_SR, k1), k0
+	ldc	k0, sr
+
+	/* now: user register set! */
+	stc	vbr, r5
+
+	/* setup spc with return address to c code */
+	mov.l	@(SH_SLEEP_SPC, r5), r0
+	ldc	r0, spc
+
+	/* restore vbr */
+	mov.l	@(SH_SLEEP_VBR, r5), r0
+	ldc	r0, vbr
+
+	/* setup ssr with saved sr */
+	mov.l	@(SH_SLEEP_SR, r5), r0
+	ldc	r0, ssr
+
+	/* restore sp */
+	mov.l   @(SH_SLEEP_SP, r5), r15
+
+	/* restore sleep mode register */
+	bsr     restore_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
+
+	/* call self-refresh resume code if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_SF, r0
+	bt	skip_restore_sf
+
+	mov.l	@(SH_SLEEP_SF_POST, r5), r0
+	jsr	@r0
+	 nop
+
+skip_restore_sf:
+	/* restore mmu and cache state if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_MMU, r0
+	bt	skip_restore_mmu
+
+	/* restore mmu state */
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEH, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEL, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_TTB, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_TEA, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEA, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PASCR, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_IRMCR, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+	icbi	@r0
+
+	/* restore cache settings */
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_RAMCR, r0
+	icbi	@r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+	icbi	@r0
+
+skip_restore_mmu:
+
+	/* restore general purpose registers if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_REGS, r0
+	bt	skip_restore_regs
+
+	/* switch to bank 1, restore low registers */
+	mov.l	_rb_bit, r10
+	bsr	_set_sr
+	 mov	#-1, r9
+
+	bsr	restore_low_regs
+	 nop
+
+	/* switch to bank0, restore low registers */
+	mov.l	_rb_bit, r9
+	not	r9, r9
+	bsr	_set_sr
+	 mov	#0, r10
+
+	bsr	restore_low_regs
+	 nop
+
+	/* restore the rest of the registers */
+	mov.l	@r15+, r8
+	mov.l	@r15+, r9
+	mov.l	@r15+, r10
+	mov.l	@r15+, r11
+	mov.l	@r15+, r12
+	mov.l	@r15+, r13
+	mov.l	@r15+, r14
+	lds.l	@r15+, pr
+
+skip_restore_regs:
+	rte
+	 nop
+
+restore_register:
+	add	#SH_SLEEP_BASE_DATA, r0
+	mov.l	@(r0, r5), r1
+	add	#-SH_SLEEP_BASE_DATA, r0
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r0
+	mov.l	r1, @r0
+	rts
+	 nop
+
+_set_sr:
+	stc	sr, r8
+	and	r9, r8
+	or	r10, r8
+	ldc	r8, sr
+	rts
+	 nop
+
+restore_low_regs:
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	rts
+	 mov.l	@r15+, r7
+
+	.balign 4
+_rb_bit:	.long	0x20000000 ! RB=1
+1:	.long	~0x7ff
+ENTRY(sh_mobile_sleep_resume_end)