Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 277 insertions, 0 deletions

diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
new file mode 100644
index 000000000..c5d614d28
--- /dev/null
+++ b/arch/x86/Kconfig.debug
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config EARLY_PRINTK_USB
+	bool
+
+config X86_VERBOSE_BOOTUP
+	bool "Enable verbose x86 bootup info messages"
+	default y
+	help
+	  Enables the informational output from the decompression stage
+	  (e.g. bzImage) of the boot. If you disable this you will still
+	  see errors. Disable this if you want silent bootup.
+
+config EARLY_PRINTK
+	bool "Early printk" if EXPERT
+	default y
+	help
+	  Write kernel log output directly into the VGA buffer or to a serial
+	  port.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized. For normal operation
+	  it is not recommended because it looks ugly and doesn't cooperate
+	  with klogd/syslogd or the X server. You should normally say N here,
+	  unless you want to debug such a crash.
+
+config EARLY_PRINTK_DBGP
+	bool "Early printk via EHCI debug port"
+	depends on EARLY_PRINTK && PCI
+	select EARLY_PRINTK_USB
+	help
+	  Write kernel log output directly into the EHCI debug port.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized. For normal operation
+	  it is not recommended because it looks ugly and doesn't cooperate
+	  with klogd/syslogd or the X server. You should normally say N here,
+	  unless you want to debug such a crash. You need usb debug device.
+
+config EARLY_PRINTK_USB_XDBC
+	bool "Early printk via the xHCI debug port"
+	depends on EARLY_PRINTK && PCI
+	select EARLY_PRINTK_USB
+	help
+	  Write kernel log output directly into the xHCI debug port.
+
+	  One use for this feature is kernel debugging, for example when your
+	  machine crashes very early before the regular console code is
+	  initialized. Other uses include simpler, lockless logging instead of
+	  a full-blown printk console driver + klogd.
+
+	  For normal production environments this is normally not recommended,
+	  because it doesn't feed events into klogd/syslogd and doesn't try to
+	  print anything on the screen.
+
+	  You should normally say N here, unless you want to debug early
+	  crashes or need a very simple printk logging facility.
+
+config EFI_PGT_DUMP
+	bool "Dump the EFI pagetable"
+	depends on EFI
+	select PTDUMP_CORE
+	help
+	  Enable this if you want to dump the EFI page table before
+	  enabling virtual mode. This can be used to debug miscellaneous
+	  issues with the mapping of the EFI runtime regions into that
+	  table.
+
+config DEBUG_TLBFLUSH
+	bool "Set upper limit of TLB entries to flush one-by-one"
+	depends on DEBUG_KERNEL
+	help
+	  X86-only for now.
+
+	  This option allows the user to tune the amount of TLB entries the
+	  kernel flushes one-by-one instead of doing a full TLB flush. In
+	  certain situations, the former is cheaper. This is controlled by the
+	  tlb_flushall_shift knob under /sys/kernel/debug/x86. If you set it
+	  to -1, the code flushes the whole TLB unconditionally. Otherwise,
+	  for positive values of it, the kernel will use single TLB entry
+	  invalidating instructions according to the following formula:
+
+	  flush_entries <= active_tlb_entries / 2^tlb_flushall_shift
+
+	  If in doubt, say "N".
+
+config IOMMU_DEBUG
+	bool "Enable IOMMU debugging"
+	depends on GART_IOMMU && DEBUG_KERNEL
+	depends on X86_64
+	help
+	  Force the IOMMU to on even when you have less than 4GB of
+	  memory and add debugging code. On overflow always panic. And
+	  allow to enable IOMMU leak tracing. Can be disabled at boot
+	  time with iommu=noforce. This will also enable scatter gather
+	  list merging.  Currently not recommended for production
+	  code. When you use it make sure you have a big enough
+	  IOMMU/AGP aperture.  Most of the options enabled by this can
+	  be set more finegrained using the iommu= command line
+	  options. See Documentation/arch/x86/x86_64/boot-options.rst for more
+	  details.
+
+config IOMMU_LEAK
+	bool "IOMMU leak tracing"
+	depends on IOMMU_DEBUG && DMA_API_DEBUG
+	help
+	  Add a simple leak tracer to the IOMMU code. This is useful when you
+	  are debugging a buggy device driver that leaks IOMMU mappings.
+
+config HAVE_MMIOTRACE_SUPPORT
+	def_bool y
+
+config X86_DECODER_SELFTEST
+	bool "x86 instruction decoder selftest"
+	depends on DEBUG_KERNEL && INSTRUCTION_DECODER
+	depends on !COMPILE_TEST
+	help
+	  Perform x86 instruction decoder selftests at build time.
+	  This option is useful for checking the sanity of x86 instruction
+	  decoder code.
+	  If unsure, say "N".
+
+choice
+	prompt "IO delay type"
+	default IO_DELAY_0X80
+
+config IO_DELAY_0X80
+	bool "port 0x80 based port-IO delay [recommended]"
+	help
+	  This is the traditional Linux IO delay used for in/out_p.
+	  It is the most tested hence safest selection here.
+
+config IO_DELAY_0XED
+	bool "port 0xed based port-IO delay"
+	help
+	  Use port 0xed as the IO delay. This frees up port 0x80 which is
+	  often used as a hardware-debug port.
+
+config IO_DELAY_UDELAY
+	bool "udelay based port-IO delay"
+	help
+	  Use udelay(2) as the IO delay method. This provides the delay
+	  while not having any side-effect on the IO port space.
+
+config IO_DELAY_NONE
+	bool "no port-IO delay"
+	help
+	  No port-IO delay. Will break on old boxes that require port-IO
+	  delay for certain operations. Should work on most new machines.
+
+endchoice
+
+config DEBUG_BOOT_PARAMS
+	bool "Debug boot parameters"
+	depends on DEBUG_KERNEL
+	depends on DEBUG_FS
+	help
+	  This option will cause struct boot_params to be exported via debugfs.
+
+config CPA_DEBUG
+	bool "CPA self-test code"
+	depends on DEBUG_KERNEL
+	help
+	  Do change_page_attr() self-tests every 30 seconds.
+
+config DEBUG_ENTRY
+	bool "Debug low-level entry code"
+	depends on DEBUG_KERNEL
+	help
+	  This option enables sanity checks in x86's low-level entry code.
+	  Some of these sanity checks may slow down kernel entries and
+	  exits or otherwise impact performance.
+
+	  If unsure, say N.
+
+config DEBUG_NMI_SELFTEST
+	bool "NMI Selftest"
+	depends on DEBUG_KERNEL && X86_LOCAL_APIC
+	help
+	  Enabling this option turns on a quick NMI selftest to verify
+	  that the NMI behaves correctly.
+
+	  This might help diagnose strange hangs that rely on NMI to
+	  function properly.
+
+	  If unsure, say N.
+
+config DEBUG_IMR_SELFTEST
+	bool "Isolated Memory Region self test"
+	depends on INTEL_IMR
+	help
+	  This option enables automated sanity testing of the IMR code.
+	  Some simple tests are run to verify IMR bounds checking, alignment
+	  and overlapping. This option is really only useful if you are
+	  debugging an IMR memory map or are modifying the IMR code and want to
+	  test your changes.
+
+	  If unsure say N here.
+
+config X86_DEBUG_FPU
+	bool "Debug the x86 FPU code"
+	depends on DEBUG_KERNEL
+	default y
+	help
+	  If this option is enabled then there will be extra sanity
+	  checks and (boot time) debug printouts added to the kernel.
+	  This debugging adds some small amount of runtime overhead
+	  to the kernel.
+
+	  If unsure, say N.
+
+config PUNIT_ATOM_DEBUG
+	tristate "ATOM Punit debug driver"
+	depends on PCI
+	select DEBUG_FS
+	select IOSF_MBI
+	help
+	  This is a debug driver, which gets the power states
+	  of all Punit North Complex devices. The power states of
+	  each device is exposed as part of the debugfs interface.
+	  The current power state can be read from
+	  /sys/kernel/debug/punit_atom/dev_power_state
+
+choice
+	prompt "Choose kernel unwinder"
+	default UNWINDER_ORC if X86_64
+	default UNWINDER_FRAME_POINTER if X86_32
+	help
+	  This determines which method will be used for unwinding kernel stack
+	  traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack,
+	  livepatch, lockdep, and more.
+
+config UNWINDER_ORC
+	bool "ORC unwinder"
+	depends on X86_64
+	select OBJTOOL
+	help
+	  This option enables the ORC (Oops Rewind Capability) unwinder for
+	  unwinding kernel stack traces.  It uses a custom data format which is
+	  a simplified version of the DWARF Call Frame Information standard.
+
+	  This unwinder is more accurate across interrupt entry frames than the
+	  frame pointer unwinder.  It also enables a 5-10% performance
+	  improvement across the entire kernel compared to frame pointers.
+
+	  Enabling this option will increase the kernel's runtime memory usage
+	  by roughly 2-4MB, depending on your kernel config.
+
+config UNWINDER_FRAME_POINTER
+	bool "Frame pointer unwinder"
+	select FRAME_POINTER
+	help
+	  This option enables the frame pointer unwinder for unwinding kernel
+	  stack traces.
+
+	  The unwinder itself is fast and it uses less RAM than the ORC
+	  unwinder, but the kernel text size will grow by ~3% and the kernel's
+	  overall performance will degrade by roughly 5-10%.
+
+config UNWINDER_GUESS
+	bool "Guess unwinder"
+	depends on EXPERT
+	depends on !STACKDEPOT
+	help
+	  This option enables the "guess" unwinder for unwinding kernel stack
+	  traces.  It scans the stack and reports every kernel text address it
+	  finds.  Some of the addresses it reports may be incorrect.
+
+	  While this option often produces false positives, it can still be
+	  useful in many cases.  Unlike the other unwinders, it has no runtime
+	  overhead.
+
+endchoice
+
+config FRAME_POINTER
+	depends on !UNWINDER_ORC && !UNWINDER_GUESS
+	bool