Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 4 insertions, 203 deletions

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index a04a5163e5..803dcfb0e3 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -19,6 +19,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/mc146818rtc.h>
 #include <linux/acpi_pmtmr.h>
+#include <linux/bitmap.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
@@ -67,10 +68,6 @@
 
 #include "local.h"
 
-unsigned int num_processors;
-
-unsigned disabled_cpus;
-
 /* Processor that is doing the boot up */
 u32 boot_cpu_physical_apicid __ro_after_init = BAD_APICID;
 EXPORT_SYMBOL_GPL(boot_cpu_physical_apicid);
@@ -78,18 +75,6 @@ EXPORT_SYMBOL_GPL(boot_cpu_physical_apicid);
 u8 boot_cpu_apic_version __ro_after_init;
 
 /*
- * Bitmask of physically existing CPUs:
- */
-physid_mask_t phys_cpu_present_map;
-
-/*
- * Processor to be disabled specified by kernel parameter
- * disable_cpu_apicid=<int>, mostly used for the kdump 2nd kernel to
- * avoid undefined behaviour caused by sending INIT from AP to BSP.
- */
-static u32 disabled_cpu_apicid __ro_after_init = BAD_APICID;
-
-/*
  * This variable controls which CPUs receive external NMIs.  By default,
  * external NMIs are delivered only to the BSP.
  */
@@ -108,14 +93,6 @@ static inline bool apic_accessible(void)
 	return x2apic_mode || apic_mmio_base;
 }
 
-/*
- * Map cpu index to physical APIC ID
- */
-DEFINE_EARLY_PER_CPU_READ_MOSTLY(u32, x86_cpu_to_apicid, BAD_APICID);
-DEFINE_EARLY_PER_CPU_READ_MOSTLY(u32, x86_cpu_to_acpiid, U32_MAX);
-EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
-EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_acpiid);
-
 #ifdef CONFIG_X86_32
 /* Local APIC was disabled by the BIOS and enabled by the kernel */
 static int enabled_via_apicbase __ro_after_init;
@@ -261,16 +238,6 @@ u64 native_apic_icr_read(void)
 	return icr1 | ((u64)icr2 << 32);
 }
 
-#ifdef CONFIG_X86_32
-/**
- * get_physical_broadcast - Get number of physical broadcast IDs
- */
-int get_physical_broadcast(void)
-{
-	return modern_apic() ? 0xff : 0xf;
-}
-#endif
-
 /**
  * lapic_get_maxlvt - get the maximum number of local vector table entries
  */
@@ -1549,9 +1516,6 @@ static void setup_local_APIC(void)
 		apic_write(APIC_ESR, 0);
 	}
 #endif
-	/* Validate that the APIC is registered if required */
-	BUG_ON(apic->apic_id_registered && !apic->apic_id_registered());
-
 	/*
 	 * Intel recommends to set DFR, LDR and TPR before enabling
 	 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
@@ -1690,8 +1654,6 @@ void apic_ap_setup(void)
 	end_local_APIC_setup();
 }
 
-static __init void cpu_set_boot_apic(void);
-
 static __init void apic_read_boot_cpu_id(bool x2apic)
 {
 	/*
@@ -1706,7 +1668,8 @@ static __init void apic_read_boot_cpu_id(bool x2apic)
 		boot_cpu_physical_apicid = read_apic_id();
 		boot_cpu_apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
 	}
-	cpu_set_boot_apic();
+	topology_register_boot_apic(boot_cpu_physical_apicid);
+	x86_32_probe_bigsmp_early();
 }
 
 #ifdef CONFIG_X86_X2APIC
@@ -2096,7 +2059,6 @@ void __init init_apic_mappings(void)
 			pr_info("APIC: disable apic facility\n");
 			apic_disable();
 		}
-		num_processors = 1;
 	}
 }
 
@@ -2311,155 +2273,6 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	apic_write(APIC_LVT1, value);
 }
 
-/*
- * The number of allocated logical CPU IDs. Since logical CPU IDs are allocated
- * contiguously, it equals to current allocated max logical CPU ID plus 1.
- * All allocated CPU IDs should be in the [0, nr_logical_cpuids) range,
- * so the maximum of nr_logical_cpuids is nr_cpu_ids.
- *
- * NOTE: Reserve 0 for BSP.
- */
-static int nr_logical_cpuids = 1;
-
-/*
- * Used to store mapping between logical CPU IDs and APIC IDs.
- */
-u32 cpuid_to_apicid[] = { [0 ... NR_CPUS - 1] = BAD_APICID, };
-
-bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
-{
-	return phys_id == (u64)cpuid_to_apicid[cpu];
-}
-
-#ifdef CONFIG_SMP
-static void cpu_mark_primary_thread(unsigned int cpu, unsigned int apicid)
-{
-	/* Isolate the SMT bit(s) in the APICID and check for 0 */
-	u32 mask = (1U << (fls(smp_num_siblings) - 1)) - 1;
-
-	if (smp_num_siblings == 1 || !(apicid & mask))
-		cpumask_set_cpu(cpu, &__cpu_primary_thread_mask);
-}
-
-/*
- * Due to the utter mess of CPUID evaluation smp_num_siblings is not valid
- * during early boot. Initialize the primary thread mask before SMP
- * bringup.
- */
-static int __init smp_init_primary_thread_mask(void)
-{
-	unsigned int cpu;
-
-	/*
-	 * XEN/PV provides either none or useless topology information.
-	 * Pretend that all vCPUs are primary threads.
-	 */
-	if (xen_pv_domain()) {
-		cpumask_copy(&__cpu_primary_thread_mask, cpu_possible_mask);
-		return 0;
-	}
-
-	for (cpu = 0; cpu < nr_logical_cpuids; cpu++)
-		cpu_mark_primary_thread(cpu, cpuid_to_apicid[cpu]);
-	return 0;
-}
-early_initcall(smp_init_primary_thread_mask);
-#else
-static inline void cpu_mark_primary_thread(unsigned int cpu, unsigned int apicid) { }
-#endif
-
-/*
- * Should use this API to allocate logical CPU IDs to keep nr_logical_cpuids
- * and cpuid_to_apicid[] synchronized.
- */
-static int allocate_logical_cpuid(int apicid)
-{
-	int i;
-
-	/*
-	 * cpuid <-> apicid mapping is persistent, so when a cpu is up,
-	 * check if the kernel has allocated a cpuid for it.
-	 */
-	for (i = 0; i < nr_logical_cpuids; i++) {
-		if (cpuid_to_apicid[i] == apicid)
-			return i;
-	}
-
-	/* Allocate a new cpuid. */
-	if (nr_logical_cpuids >= nr_cpu_ids) {
-		WARN_ONCE(1, "APIC: NR_CPUS/possible_cpus limit of %u reached. "
-			     "Processor %d/0x%x and the rest are ignored.\n",
-			     nr_cpu_ids, nr_logical_cpuids, apicid);
-		return -EINVAL;
-	}
-
-	cpuid_to_apicid[nr_logical_cpuids] = apicid;
-	return nr_logical_cpuids++;
-}
-
-static void cpu_update_apic(int cpu, u32 apicid)
-{
-#if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
-	early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
-#endif
-	set_cpu_possible(cpu, true);
-	physid_set(apicid, phys_cpu_present_map);
-	set_cpu_present(cpu, true);
-	num_processors++;
-
-	if (system_state != SYSTEM_BOOTING)
-		cpu_mark_primary_thread(cpu, apicid);
-}
-
-static __init void cpu_set_boot_apic(void)
-{
-	cpuid_to_apicid[0] = boot_cpu_physical_apicid;
-	cpu_update_apic(0, boot_cpu_physical_apicid);
-	x86_32_probe_bigsmp_early();
-}
-
-int generic_processor_info(int apicid)
-{
-	int cpu, max = nr_cpu_ids;
-
-	/* The boot CPU must be set before MADT/MPTABLE parsing happens */
-	if (cpuid_to_apicid[0] == BAD_APICID)
-		panic("Boot CPU APIC not registered yet\n");
-
-	if (apicid == boot_cpu_physical_apicid)
-		return 0;
-
-	if (disabled_cpu_apicid == apicid) {
-		int thiscpu = num_processors + disabled_cpus;
-
-		pr_warn("APIC: Disabling requested cpu. Processor %d/0x%x ignored.\n",
-			thiscpu, apicid);
-
-		disabled_cpus++;
-		return -ENODEV;
-	}
-
-	if (num_processors >= nr_cpu_ids) {
-		int thiscpu = max + disabled_cpus;
-
-		pr_warn("APIC: NR_CPUS/possible_cpus limit of %i reached. "
-			"Processor %d/0x%x ignored.\n", max, thiscpu, apicid);
-
-		disabled_cpus++;
-		return -EINVAL;
-	}
-
-	cpu = allocate_logical_cpuid(apicid);
-	if (cpu < 0) {
-		disabled_cpus++;
-		return -EINVAL;
-	}
-
-	cpu_update_apic(cpu, apicid);
-	return cpu;
-}
-
-
 void __irq_msi_compose_msg(struct irq_cfg *cfg, struct msi_msg *msg,
 			   bool dmar)
 {
@@ -2502,10 +2315,7 @@ EXPORT_SYMBOL_GPL(x86_msi_msg_get_destid);
 
 static void __init apic_bsp_up_setup(void)
 {
-#ifdef CONFIG_X86_64
-	apic_write(APIC_ID, apic->set_apic_id(boot_cpu_physical_apicid));
-#endif
-	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
+	reset_phys_cpu_present_map(boot_cpu_physical_apicid);
 }
 
 /**
@@ -2851,15 +2661,6 @@ static int __init lapic_insert_resource(void)
  */
 late_initcall(lapic_insert_resource);
 
-static int __init apic_set_disabled_cpu_apicid(char *arg)
-{
-	if (!arg || !get_option(&arg, &disabled_cpu_apicid))
-		return -EINVAL;
-
-	return 0;
-}
-early_param("disable_cpu_apicid", apic_set_disabled_cpu_apicid);
-
 static int __init apic_set_extnmi(char *arg)
 {
 	if (!arg)