Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 61 insertions, 13 deletions

diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 4989095ab7..6d3d20e3e4 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -56,6 +56,7 @@
 #include <asm/resctrl.h>
 #include <asm/unistd.h>
 #include <asm/fsgsbase.h>
+#include <asm/fred.h>
 #ifdef CONFIG_IA32_EMULATION
 /* Not included via unistd.h */
 #include <asm/unistd_32_ia32.h>
@@ -117,7 +118,7 @@ void __show_regs(struct pt_regs *regs, enum show_regs_mode mode,
 
 	printk("%sFS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
 	       log_lvl, fs, fsindex, gs, gsindex, shadowgs);
-	printk("%sCS:  %04lx DS: %04x ES: %04x CR0: %016lx\n",
+	printk("%sCS:  %04x DS: %04x ES: %04x CR0: %016lx\n",
 		log_lvl, regs->cs, ds, es, cr0);
 	printk("%sCR2: %016lx CR3: %016lx CR4: %016lx\n",
 		log_lvl, cr2, cr3, cr4);
@@ -166,7 +167,29 @@ static noinstr unsigned long __rdgsbase_inactive(void)
 
 	lockdep_assert_irqs_disabled();
 
-	if (!cpu_feature_enabled(X86_FEATURE_XENPV)) {
+	/*
+	 * SWAPGS is no longer needed thus NOT allowed with FRED because
+	 * FRED transitions ensure that an operating system can _always_
+	 * operate with its own GS base address:
+	 * - For events that occur in ring 3, FRED event delivery swaps
+	 *   the GS base address with the IA32_KERNEL_GS_BASE MSR.
+	 * - ERETU (the FRED transition that returns to ring 3) also swaps
+	 *   the GS base address with the IA32_KERNEL_GS_BASE MSR.
+	 *
+	 * And the operating system can still setup the GS segment for a
+	 * user thread without the need of loading a user thread GS with:
+	 * - Using LKGS, available with FRED, to modify other attributes
+	 *   of the GS segment without compromising its ability always to
+	 *   operate with its own GS base address.
+	 * - Accessing the GS segment base address for a user thread as
+	 *   before using RDMSR or WRMSR on the IA32_KERNEL_GS_BASE MSR.
+	 *
+	 * Note, LKGS loads the GS base address into the IA32_KERNEL_GS_BASE
+	 * MSR instead of the GS segment’s descriptor cache. As such, the
+	 * operating system never changes its runtime GS base address.
+	 */
+	if (!cpu_feature_enabled(X86_FEATURE_FRED) &&
+	    !cpu_feature_enabled(X86_FEATURE_XENPV)) {
 		native_swapgs();
 		gsbase = rdgsbase();
 		native_swapgs();
@@ -191,7 +214,8 @@ static noinstr void __wrgsbase_inactive(unsigned long gsbase)
 {
 	lockdep_assert_irqs_disabled();
 
-	if (!cpu_feature_enabled(X86_FEATURE_XENPV)) {
+	if (!cpu_feature_enabled(X86_FEATURE_FRED) &&
+	    !cpu_feature_enabled(X86_FEATURE_XENPV)) {
 		native_swapgs();
 		wrgsbase(gsbase);
 		native_swapgs();
@@ -505,7 +529,7 @@ void x86_gsbase_write_task(struct task_struct *task, unsigned long gsbase)
 static void
 start_thread_common(struct pt_regs *regs, unsigned long new_ip,
 		    unsigned long new_sp,
-		    unsigned int _cs, unsigned int _ss, unsigned int _ds)
+		    u16 _cs, u16 _ss, u16 _ds)
 {
 	WARN_ON_ONCE(regs != current_pt_regs());
 
@@ -522,11 +546,36 @@ start_thread_common(struct pt_regs *regs, unsigned long new_ip,
 	loadsegment(ds, _ds);
 	load_gs_index(0);
 
-	regs->ip		= new_ip;
-	regs->sp		= new_sp;
-	regs->cs		= _cs;
-	regs->ss		= _ss;
-	regs->flags		= X86_EFLAGS_IF;
+	regs->ip	= new_ip;
+	regs->sp	= new_sp;
+	regs->csx	= _cs;
+	regs->ssx	= _ss;
+	/*
+	 * Allow single-step trap and NMI when starting a new task, thus
+	 * once the new task enters user space, single-step trap and NMI
+	 * are both enabled immediately.
+	 *
+	 * Entering a new task is logically speaking a return from a
+	 * system call (exec, fork, clone, etc.). As such, if ptrace
+	 * enables single stepping a single step exception should be
+	 * allowed to trigger immediately upon entering user space.
+	 * This is not optional.
+	 *
+	 * NMI should *never* be disabled in user space. As such, this
+	 * is an optional, opportunistic way to catch errors.
+	 *
+	 * Paranoia: High-order 48 bits above the lowest 16 bit SS are
+	 * discarded by the legacy IRET instruction on all Intel, AMD,
+	 * and Cyrix/Centaur/VIA CPUs, thus can be set unconditionally,
+	 * even when FRED is not enabled. But we choose the safer side
+	 * to use these bits only when FRED is enabled.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_FRED)) {
+		regs->fred_ss.swevent	= true;
+		regs->fred_ss.nmi	= true;
+	}
+
+	regs->flags	= X86_EFLAGS_IF | X86_EFLAGS_FIXED;
 }
 
 void
@@ -562,14 +611,13 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 {
 	struct thread_struct *prev = &prev_p->thread;
 	struct thread_struct *next = &next_p->thread;
-	struct fpu *prev_fpu = &prev->fpu;
 	int cpu = smp_processor_id();
 
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_DEBUG_ENTRY) &&
 		     this_cpu_read(pcpu_hot.hardirq_stack_inuse));
 
-	if (!test_thread_flag(TIF_NEED_FPU_LOAD))
-		switch_fpu_prepare(prev_fpu, cpu);
+	if (!test_tsk_thread_flag(prev_p, TIF_NEED_FPU_LOAD))
+		switch_fpu_prepare(prev_p, cpu);
 
 	/* We must save %fs and %gs before load_TLS() because
 	 * %fs and %gs may be cleared by load_TLS().
@@ -623,7 +671,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	raw_cpu_write(pcpu_hot.current_task, next_p);
 	raw_cpu_write(pcpu_hot.top_of_stack, task_top_of_stack(next_p));
 
-	switch_fpu_finish();
+	switch_fpu_finish(next_p);
 
 	/* Reload sp0. */
 	update_task_stack(next_p);