Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 588 insertions, 0 deletions

diff --git a/arch/x86/platform/ce4100/Makefile b/arch/x86/platform/ce4100/Makefile
new file mode 100644
index 0000000000..7b7f37dc80
--- /dev/null
+++ b/arch/x86/platform/ce4100/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_X86_INTEL_CE)	+= ce4100.o
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
new file mode 100644
index 0000000000..40745664d9
--- /dev/null
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel CE4100  platform specific setup code
+ *
+ * (C) Copyright 2010 Intel Corporation
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/reboot.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include <asm/ce4100.h>
+#include <asm/prom.h>
+#include <asm/setup.h>
+#include <asm/i8259.h>
+#include <asm/io.h>
+#include <asm/io_apic.h>
+#include <asm/emergency-restart.h>
+
+/*
+ * The CE4100 platform has an internal 8051 Microcontroller which is
+ * responsible for signaling to the external Power Management Unit the
+ * intention to reset, reboot or power off the system. This 8051 device has
+ * its command register mapped at I/O port 0xcf9 and the value 0x4 is used
+ * to power off the system.
+ */
+static void ce4100_power_off(void)
+{
+	outb(0x4, 0xcf9);
+}
+
+#ifdef CONFIG_SERIAL_8250
+
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+	offset = offset << p->regshift;
+	return readl(p->membase + offset);
+}
+
+/*
+ * The UART Tx interrupts are not set under some conditions and therefore serial
+ * transmission hangs. This is a silicon issue and has not been root caused. The
+ * workaround for this silicon issue checks UART_LSR_THRE bit and UART_LSR_TEMT
+ * bit of LSR register in interrupt handler to see whether at least one of these
+ * two bits is set, if so then process the transmit request. If this workaround
+ * is not applied, then the serial transmission may hang. This workaround is for
+ * errata number 9 in Errata - B step.
+*/
+
+static unsigned int ce4100_mem_serial_in(struct uart_port *p, int offset)
+{
+	unsigned int ret, ier, lsr;
+
+	if (offset == UART_IIR) {
+		offset = offset << p->regshift;
+		ret = readl(p->membase + offset);
+		if (ret & UART_IIR_NO_INT) {
+			/* see if the TX interrupt should have really set */
+			ier = mem_serial_in(p, UART_IER);
+			/* see if the UART's XMIT interrupt is enabled */
+			if (ier & UART_IER_THRI) {
+				lsr = mem_serial_in(p, UART_LSR);
+				/* now check to see if the UART should be
+				   generating an interrupt (but isn't) */
+				if (lsr & (UART_LSR_THRE | UART_LSR_TEMT))
+					ret &= ~UART_IIR_NO_INT;
+			}
+		}
+	} else
+		ret =  mem_serial_in(p, offset);
+	return ret;
+}
+
+static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value)
+{
+	offset = offset << p->regshift;
+	writel(value, p->membase + offset);
+}
+
+static void ce4100_serial_fixup(int port, struct uart_port *up,
+	u32 *capabilities)
+{
+#ifdef CONFIG_EARLY_PRINTK
+	/*
+	 * Over ride the legacy port configuration that comes from
+	 * asm/serial.h. Using the ioport driver then switching to the
+	 * PCI memmaped driver hangs the IOAPIC
+	 */
+	if (up->iotype !=  UPIO_MEM32) {
+		up->uartclk  = 14745600;
+		up->mapbase = 0xdffe0200;
+		set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
+				up->mapbase & PAGE_MASK);
+		up->membase =
+			(void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+		up->membase += up->mapbase & ~PAGE_MASK;
+		up->mapbase += port * 0x100;
+		up->membase += port * 0x100;
+		up->iotype   = UPIO_MEM32;
+		up->regshift = 2;
+		up->irq = 4;
+	}
+#endif
+	up->iobase = 0;
+	up->serial_in = ce4100_mem_serial_in;
+	up->serial_out = ce4100_mem_serial_out;
+
+	*capabilities |= (1 << 12);
+}
+
+static __init void sdv_serial_fixup(void)
+{
+	serial8250_set_isa_configurator(ce4100_serial_fixup);
+}
+
+#else
+static inline void sdv_serial_fixup(void) {};
+#endif
+
+static void __init sdv_arch_setup(void)
+{
+	sdv_serial_fixup();
+}
+
+static void sdv_pci_init(void)
+{
+	x86_of_pci_init();
+}
+
+/*
+ * CE4100 specific x86_init function overrides and early setup
+ * calls.
+ */
+void __init x86_ce4100_early_setup(void)
+{
+	x86_init.oem.arch_setup = sdv_arch_setup;
+	x86_init.resources.probe_roms = x86_init_noop;
+	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
+	x86_init.mpparse.find_smp_config = x86_init_noop;
+	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
+	x86_init.pci.init = ce4100_pci_init;
+	x86_init.pci.init_irq = sdv_pci_init;
+
+	/*
+	 * By default, the reboot method is ACPI which is supported by the
+	 * CE4100 bootloader CEFDK using FADT.ResetReg Address and ResetValue
+	 * the bootloader will however issue a system power off instead of
+	 * reboot. By using BOOT_KBD we ensure proper system reboot as
+	 * expected.
+	 */
+	reboot_type = BOOT_KBD;
+
+	pm_power_off = ce4100_power_off;
+}
diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts
new file mode 100644
index 0000000000..65fa3d8662
--- /dev/null
+++ b/arch/x86/platform/ce4100/falconfalls.dts
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * CE4100 on Falcon Falls
+ *
+ * (c) Copyright 2010 Intel Corporation
+ */
+/dts-v1/;
+/ {
+	model = "intel,falconfalls";
+	compatible = "intel,falconfalls";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "intel,ce4100";
+			reg = <0>;
+			lapic = <&lapic0>;
+		};
+	};
+
+	soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "intel,ce4100-cp";
+		ranges;
+
+		ioapic1: interrupt-controller@fec00000 {
+			#interrupt-cells = <2>;
+			compatible = "intel,ce4100-ioapic";
+			interrupt-controller;
+			reg = <0xfec00000 0x1000>;
+		};
+
+		timer@fed00000 {
+			compatible = "intel,ce4100-hpet";
+			reg = <0xfed00000 0x200>;
+		};
+
+		lapic0: interrupt-controller@fee00000 {
+			compatible = "intel,ce4100-lapic";
+			reg = <0xfee00000 0x1000>;
+		};
+
+		pci@3fc {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			compatible = "intel,ce4100-pci", "pci";
+			device_type = "pci";
+			bus-range = <0 0>;
+			ranges = <0x2000000 0 0xbffff000 0xbffff000 0 0x1000
+				  0x2000000 0 0xdffe0000 0xdffe0000 0 0x1000
+				  0x0000000 0 0x0	 0x0	    0 0x100>;
+
+			/* Secondary IO-APIC */
+			ioapic2: interrupt-controller@0,1 {
+				#interrupt-cells = <2>;
+				compatible = "intel,ce4100-ioapic";
+				interrupt-controller;
+				reg = <0x100 0x0 0x0 0x0 0x0>;
+				assigned-addresses = <0x02000000 0x0 0xbffff000 0x0 0x1000>;
+			};
+
+			pci@1,0 {
+				#address-cells = <3>;
+				#size-cells = <2>;
+				compatible = "intel,ce4100-pci", "pci";
+				device_type = "pci";
+				bus-range = <1 1>;
+				reg = <0x0800 0x0 0x0 0x0 0x0>;
+				ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>;
+
+				interrupt-parent = <&ioapic2>;
+
+				display@2,0 {
+					compatible = "pci8086,2e5b.2",
+						   "pci8086,2e5b",
+						   "pciclass038000",
+						   "pciclass0380";
+
+					reg = <0x11000 0x0 0x0 0x0 0x0>;
+					interrupts = <0 1>;
+				};
+
+				multimedia@3,0 {
+					compatible = "pci8086,2e5c.2",
+						   "pci8086,2e5c",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x11800 0x0 0x0 0x0 0x0>;
+					interrupts = <2 1>;
+				};
+
+				multimedia@4,0 {
+					compatible = "pci8086,2e5d.2",
+						   "pci8086,2e5d",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x12000 0x0 0x0 0x0 0x0>;
+					interrupts = <4 1>;
+				};
+
+				multimedia@4,1 {
+					compatible = "pci8086,2e5e.2",
+						   "pci8086,2e5e",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x12100 0x0 0x0 0x0 0x0>;
+					interrupts = <5 1>;
+				};
+
+				sound@6,0 {
+					compatible = "pci8086,2e5f.2",
+						   "pci8086,2e5f",
+						   "pciclass040100",
+						   "pciclass0401";
+
+					reg = <0x13000 0x0 0x0 0x0 0x0>;
+					interrupts = <6 1>;
+				};
+
+				sound@6,1 {
+					compatible = "pci8086,2e5f.2",
+						   "pci8086,2e5f",
+						   "pciclass040100",
+						   "pciclass0401";
+
+					reg = <0x13100 0x0 0x0 0x0 0x0>;
+					interrupts = <7 1>;
+				};
+
+				sound@6,2 {
+					compatible = "pci8086,2e60.2",
+						   "pci8086,2e60",
+						   "pciclass040100",
+						   "pciclass0401";
+
+					reg = <0x13200 0x0 0x0 0x0 0x0>;
+					interrupts = <8 1>;
+				};
+
+				display@8,0 {
+					compatible = "pci8086,2e61.2",
+						   "pci8086,2e61",
+						   "pciclass038000",
+						   "pciclass0380";
+
+					reg = <0x14000 0x0 0x0 0x0 0x0>;
+					interrupts = <9 1>;
+				};
+
+				display@8,1 {
+					compatible = "pci8086,2e62.2",
+						   "pci8086,2e62",
+						   "pciclass038000",
+						   "pciclass0380";
+
+					reg = <0x14100 0x0 0x0 0x0 0x0>;
+					interrupts = <10 1>;
+				};
+
+				multimedia@8,2 {
+					compatible = "pci8086,2e63.2",
+						   "pci8086,2e63",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x14200 0x0 0x0 0x0 0x0>;
+					interrupts = <11 1>;
+				};
+
+				entertainment-encryption@9,0 {
+					compatible = "pci8086,2e64.2",
+						   "pci8086,2e64",
+						   "pciclass101000",
+						   "pciclass1010";
+
+					reg = <0x14800 0x0 0x0 0x0 0x0>;
+					interrupts = <12 1>;
+				};
+
+				localbus@a,0 {
+					compatible = "pci8086,2e65.2",
+						   "pci8086,2e65",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x15000 0x0 0x0 0x0 0x0>;
+				};
+
+				serial@b,0 {
+					compatible = "pci8086,2e66.2",
+						   "pci8086,2e66",
+						   "pciclass070003",
+						   "pciclass0700";
+
+					reg = <0x15800 0x0 0x0 0x0 0x0>;
+					interrupts = <14 1>;
+				};
+
+				pcigpio: gpio@b,1 {
+					#gpio-cells = <2>;
+					#interrupt-cells = <2>;
+					compatible = "pci8086,2e67.2",
+						   "pci8086,2e67",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x15900 0x0 0x0 0x0 0x0>;
+					interrupts = <15 1>;
+					interrupt-controller;
+					gpio-controller;
+					intel,muxctl = <0>;
+				};
+
+				i2c-controller@b,2 {
+					#address-cells = <2>;
+					#size-cells = <1>;
+					compatible = "pci8086,2e68.2",
+						   "pci8086,2e68",
+						   "pciclass,ff0000",
+						   "pciclass,ff00";
+
+					reg = <0x15a00 0x0 0x0 0x0 0x0>;
+					interrupts = <16 1>;
+					ranges = <0 0	0x02000000 0 0xdffe0500	0x100
+						  1 0	0x02000000 0 0xdffe0600	0x100
+						  2 0	0x02000000 0 0xdffe0700	0x100>;
+
+					i2c@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						compatible = "intel,ce4100-i2c-controller";
+						reg = <0 0 0x100>;
+					};
+
+					i2c@1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						compatible = "intel,ce4100-i2c-controller";
+						reg = <1 0 0x100>;
+
+						gpio@26 {
+							#gpio-cells = <2>;
+							compatible = "nxp,pcf8575";
+							reg = <0x26>;
+							gpio-controller;
+						};
+					};
+
+					i2c@2 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						compatible = "intel,ce4100-i2c-controller";
+						reg = <2 0 0x100>;
+
+						gpio@26 {
+							#gpio-cells = <2>;
+							compatible = "nxp,pcf8575";
+							reg = <0x26>;
+							gpio-controller;
+						};
+					};
+				};
+
+				smard-card@b,3 {
+					compatible = "pci8086,2e69.2",
+						   "pci8086,2e69",
+						   "pciclass070500",
+						   "pciclass0705";
+
+					reg = <0x15b00 0x0 0x0 0x0 0x0>;
+					interrupts = <15 1>;
+				};
+
+				spi-controller@b,4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible =
+						"pci8086,2e6a.2",
+						"pci8086,2e6a",
+						"pciclass,ff0000",
+						"pciclass,ff00";
+
+					reg = <0x15c00 0x0 0x0 0x0 0x0>;
+					interrupts = <15 1>;
+
+					dac@0 {
+						compatible = "ti,pcm1755";
+						reg = <0>;
+						spi-max-frequency = <115200>;
+					};
+
+					dac@1 {
+						compatible = "ti,pcm1609a";
+						reg = <1>;
+						spi-max-frequency = <115200>;
+					};
+
+					eeprom@2 {
+						compatible = "atmel,at93c46";
+						reg = <2>;
+						spi-max-frequency = <115200>;
+					};
+				};
+
+				multimedia@b,7 {
+					compatible = "pci8086,2e6d.2",
+						   "pci8086,2e6d",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x15f00 0x0 0x0 0x0 0x0>;
+				};
+
+				ethernet@c,0 {
+					compatible = "pci8086,2e6e.2",
+						   "pci8086,2e6e",
+						   "pciclass020000",
+						   "pciclass0200";
+
+					reg = <0x16000 0x0 0x0 0x0 0x0>;
+					interrupts = <21 1>;
+				};
+
+				clock@c,1 {
+					compatible = "pci8086,2e6f.2",
+						   "pci8086,2e6f",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x16100 0x0 0x0 0x0 0x0>;
+					interrupts = <3 1>;
+				};
+
+				usb@d,0 {
+					compatible = "pci8086,2e70.2",
+						   "pci8086,2e70",
+						   "pciclass0c0320",
+						   "pciclass0c03";
+
+					reg = <0x16800 0x0 0x0 0x0 0x0>;
+					interrupts = <22 1>;
+				};
+
+				usb@d,1 {
+					compatible = "pci8086,2e70.2",
+						   "pci8086,2e70",
+						   "pciclass0c0320",
+						   "pciclass0c03";
+
+					reg = <0x16900 0x0 0x0 0x0 0x0>;
+					interrupts = <22 1>;
+				};
+
+				sata@e,0 {
+					compatible = "pci8086,2e71.0",
+						   "pci8086,2e71",
+						   "pciclass010601",
+						   "pciclass0106";
+
+					reg = <0x17000 0x0 0x0 0x0 0x0>;
+					interrupts = <23 1>;
+				};
+
+				flash@f,0 {
+					compatible = "pci8086,701.1",
+						   "pci8086,701",
+						   "pciclass050100",
+						   "pciclass0501";
+
+					reg = <0x17800 0x0 0x0 0x0 0x0>;
+					interrupts = <13 1>;
+				};
+
+				entertainment-encryption@10,0 {
+					compatible = "pci8086,702.1",
+						   "pci8086,702",
+						   "pciclass101000",
+						   "pciclass1010";
+
+					reg = <0x18000 0x0 0x0 0x0 0x0>;
+				};
+
+				co-processor@11,0 {
+					compatible = "pci8086,703.1",
+						   "pci8086,703",
+						   "pciclass0b4000",
+						   "pciclass0b40";
+
+					reg = <0x18800 0x0 0x0 0x0 0x0>;
+					interrupts = <1 1>;
+				};
+
+				multimedia@12,0 {
+					compatible = "pci8086,704.0",
+						   "pci8086,704",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x19000 0x0 0x0 0x0 0x0>;
+				};
+			};
+
+			isa@1f,0 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "isa";
+				reg = <0xf800 0x0 0x0 0x0 0x0>;
+				ranges = <1 0 0 0 0 0x100>;
+
+				rtc@70 {
+					compatible = "intel,ce4100-rtc", "motorola,mc146818";
+					interrupts = <8 3>;
+					interrupt-parent = <&ioapic1>;
+					ctrl-reg = <2>;
+					freq-reg = <0x26>;
+					reg = <1 0x70 2>;
+				};
+			};
+		};
+	};
+};