Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 423 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c
new file mode 100644
index 0000000000..0dbc4d8891
--- /dev/null
+++ b/drivers/acpi/acpica/evgpeinit.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/******************************************************************************
+ *
+ * Module Name: evgpeinit - System GPE initialization and update
+ *
+ * Copyright (C) 2000 - 2023, Intel Corp.
+ *
+ *****************************************************************************/
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acevents.h"
+#include "acnamesp.h"
+
+#define _COMPONENT          ACPI_EVENTS
+ACPI_MODULE_NAME("evgpeinit")
+#if (!ACPI_REDUCED_HARDWARE)	/* Entire module */
+/*
+ * Note: History of _PRW support in ACPICA
+ *
+ * Originally (2000 - 2010), the GPE initialization code performed a walk of
+ * the entire namespace to execute the _PRW methods and detect all GPEs
+ * capable of waking the system.
+ *
+ * As of 10/2010, the _PRW method execution has been removed since it is
+ * actually unnecessary. The host OS must in fact execute all _PRW methods
+ * in order to identify the device/power-resource dependencies. We now put
+ * the onus on the host OS to identify the wake GPEs as part of this process
+ * and to inform ACPICA of these GPEs via the acpi_setup_gpe_for_wake interface. This
+ * not only reduces the complexity of the ACPICA initialization code, but in
+ * some cases (on systems with very large namespaces) it should reduce the
+ * kernel boot time as well.
+ */
+
+#ifdef ACPI_GPE_USE_LOGICAL_ADDRESSES
+#define ACPI_FADT_GPE_BLOCK_ADDRESS(N)	\
+	acpi_gbl_FADT.xgpe##N##_block.space_id == \
+					ACPI_ADR_SPACE_SYSTEM_MEMORY ? \
+		(u64)acpi_gbl_xgpe##N##_block_logical_address : \
+		acpi_gbl_FADT.xgpe##N##_block.address
+#else
+#define ACPI_FADT_GPE_BLOCK_ADDRESS(N)	acpi_gbl_FADT.xgpe##N##_block.address
+#endif		/* ACPI_GPE_USE_LOGICAL_ADDRESSES */
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_gpe_initialize
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Initialize the GPE data structures and the FADT GPE 0/1 blocks
+ *
+ ******************************************************************************/
+acpi_status acpi_ev_gpe_initialize(void)
+{
+	u32 register_count0 = 0;
+	u32 register_count1 = 0;
+	u32 gpe_number_max = 0;
+	acpi_status status;
+	u64 address;
+
+	ACPI_FUNCTION_TRACE(ev_gpe_initialize);
+
+	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
+			      "Initializing General Purpose Events (GPEs):\n"));
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/*
+	 * Initialize the GPE Block(s) defined in the FADT
+	 *
+	 * Why the GPE register block lengths are divided by 2:  From the ACPI
+	 * Spec, section "General-Purpose Event Registers", we have:
+	 *
+	 * "Each register block contains two registers of equal length
+	 *  GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
+	 *  GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN
+	 *  The length of the GPE1_STS and GPE1_EN registers is equal to
+	 *  half the GPE1_LEN. If a generic register block is not supported
+	 *  then its respective block pointer and block length values in the
+	 *  FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need
+	 *  to be the same size."
+	 */
+
+	/*
+	 * Determine the maximum GPE number for this machine.
+	 *
+	 * Note: both GPE0 and GPE1 are optional, and either can exist without
+	 * the other.
+	 *
+	 * If EITHER the register length OR the block address are zero, then that
+	 * particular block is not supported.
+	 */
+	address = ACPI_FADT_GPE_BLOCK_ADDRESS(0);
+
+	if (acpi_gbl_FADT.gpe0_block_length && address) {
+
+		/* GPE block 0 exists (has both length and address > 0) */
+
+		register_count0 = (u16)(acpi_gbl_FADT.gpe0_block_length / 2);
+		gpe_number_max =
+		    (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
+
+		/* Install GPE Block 0 */
+
+		status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
+						  address,
+						  acpi_gbl_FADT.xgpe0_block.
+						  space_id, register_count0, 0,
+						  acpi_gbl_FADT.sci_interrupt,
+						  &acpi_gbl_gpe_fadt_blocks[0]);
+
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Could not create GPE Block 0"));
+		}
+	}
+
+	address = ACPI_FADT_GPE_BLOCK_ADDRESS(1);
+
+	if (acpi_gbl_FADT.gpe1_block_length && address) {
+
+		/* GPE block 1 exists (has both length and address > 0) */
+
+		register_count1 = (u16)(acpi_gbl_FADT.gpe1_block_length / 2);
+
+		/* Check for GPE0/GPE1 overlap (if both banks exist) */
+
+		if ((register_count0) &&
+		    (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) {
+			ACPI_ERROR((AE_INFO,
+				    "GPE0 block (GPE 0 to %u) overlaps the GPE1 block "
+				    "(GPE %u to %u) - Ignoring GPE1",
+				    gpe_number_max, acpi_gbl_FADT.gpe1_base,
+				    acpi_gbl_FADT.gpe1_base +
+				    ((register_count1 *
+				      ACPI_GPE_REGISTER_WIDTH) - 1)));
+
+			/* Ignore GPE1 block by setting the register count to zero */
+
+			register_count1 = 0;
+		} else {
+			/* Install GPE Block 1 */
+
+			status =
+			    acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
+						     address,
+						     acpi_gbl_FADT.xgpe1_block.
+						     space_id, register_count1,
+						     acpi_gbl_FADT.gpe1_base,
+						     acpi_gbl_FADT.
+						     sci_interrupt,
+						     &acpi_gbl_gpe_fadt_blocks
+						     [1]);
+
+			if (ACPI_FAILURE(status)) {
+				ACPI_EXCEPTION((AE_INFO, status,
+						"Could not create GPE Block 1"));
+			}
+
+			/*
+			 * GPE0 and GPE1 do not have to be contiguous in the GPE number
+			 * space. However, GPE0 always starts at GPE number zero.
+			 */
+		}
+	}
+
+	/* Exit if there are no GPE registers */
+
+	if ((register_count0 + register_count1) == 0) {
+
+		/* GPEs are not required by ACPI, this is OK */
+
+		ACPI_DEBUG_PRINT((ACPI_DB_INIT,
+				  "There are no GPE blocks defined in the FADT\n"));
+		goto cleanup;
+	}
+
+cleanup:
+	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_update_gpes
+ *
+ * PARAMETERS:  table_owner_id      - ID of the newly-loaded ACPI table
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a
+ *              result of a Load() or load_table() operation. If new GPE
+ *              methods have been installed, register the new methods.
+ *
+ ******************************************************************************/
+
+void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
+{
+	struct acpi_gpe_xrupt_info *gpe_xrupt_info;
+	struct acpi_gpe_block_info *gpe_block;
+	struct acpi_gpe_walk_info walk_info;
+	acpi_status status = AE_OK;
+
+	/*
+	 * Find any _Lxx/_Exx GPE methods that have just been loaded.
+	 *
+	 * Any GPEs that correspond to new _Lxx/_Exx methods are immediately
+	 * enabled.
+	 *
+	 * Examine the namespace underneath each gpe_device within the
+	 * gpe_block lists.
+	 */
+	status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
+	if (ACPI_FAILURE(status)) {
+		return;
+	}
+
+	walk_info.count = 0;
+	walk_info.owner_id = table_owner_id;
+	walk_info.execute_by_owner_id = TRUE;
+
+	/* Walk the interrupt level descriptor list */
+
+	gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
+	while (gpe_xrupt_info) {
+
+		/* Walk all Gpe Blocks attached to this interrupt level */
+
+		gpe_block = gpe_xrupt_info->gpe_block_list_head;
+		while (gpe_block) {
+			walk_info.gpe_block = gpe_block;
+			walk_info.gpe_device = gpe_block->node;
+
+			status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD,
+							walk_info.gpe_device,
+							ACPI_UINT32_MAX,
+							ACPI_NS_WALK_NO_UNLOCK,
+							acpi_ev_match_gpe_method,
+							NULL, &walk_info, NULL);
+			if (ACPI_FAILURE(status)) {
+				ACPI_EXCEPTION((AE_INFO, status,
+						"While decoding _Lxx/_Exx methods"));
+			}
+
+			gpe_block = gpe_block->next;
+		}
+
+		gpe_xrupt_info = gpe_xrupt_info->next;
+	}
+
+	if (walk_info.count) {
+		ACPI_INFO(("Enabled %u new GPEs", walk_info.count));
+	}
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
+	return;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_match_gpe_method
+ *
+ * PARAMETERS:  Callback from walk_namespace
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
+ *              control method under the _GPE portion of the namespace.
+ *              Extract the name and GPE type from the object, saving this
+ *              information for quick lookup during GPE dispatch. Allows a
+ *              per-owner_id evaluation if execute_by_owner_id is TRUE in the
+ *              walk_info parameter block.
+ *
+ *              The name of each GPE control method is of the form:
+ *              "_Lxx" or "_Exx", where:
+ *                  L      - means that the GPE is level triggered
+ *                  E      - means that the GPE is edge triggered
+ *                  xx     - is the GPE number [in HEX]
+ *
+ * If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods
+ * with that owner.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_match_gpe_method(acpi_handle obj_handle,
+			 u32 level, void *context, void **return_value)
+{
+	struct acpi_namespace_node *method_node =
+	    ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle);
+	struct acpi_gpe_walk_info *walk_info =
+	    ACPI_CAST_PTR(struct acpi_gpe_walk_info, context);
+	struct acpi_gpe_event_info *gpe_event_info;
+	acpi_status status;
+	u32 gpe_number;
+	u8 temp_gpe_number;
+	char name[ACPI_NAMESEG_SIZE + 1];
+	u8 type;
+
+	ACPI_FUNCTION_TRACE(ev_match_gpe_method);
+
+	/* Check if requested owner_id matches this owner_id */
+
+	if ((walk_info->execute_by_owner_id) &&
+	    (method_node->owner_id != walk_info->owner_id)) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/*
+	 * Match and decode the _Lxx and _Exx GPE method names
+	 *
+	 * 1) Extract the method name and null terminate it
+	 */
+	ACPI_MOVE_32_TO_32(name, &method_node->name.integer);
+	name[ACPI_NAMESEG_SIZE] = 0;
+
+	/* 2) Name must begin with an underscore */
+
+	if (name[0] != '_') {
+		return_ACPI_STATUS(AE_OK);	/* Ignore this method */
+	}
+
+	/*
+	 * 3) Edge/Level determination is based on the 2nd character
+	 *    of the method name
+	 */
+	switch (name[1]) {
+	case 'L':
+
+		type = ACPI_GPE_LEVEL_TRIGGERED;
+		break;
+
+	case 'E':
+
+		type = ACPI_GPE_EDGE_TRIGGERED;
+		break;
+
+	default:
+
+		/* Unknown method type, just ignore it */
+
+		ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
+				  "Ignoring unknown GPE method type: %s "
+				  "(name not of form _Lxx or _Exx)", name));
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* 4) The last two characters of the name are the hex GPE Number */
+
+	status = acpi_ut_ascii_to_hex_byte(&name[2], &temp_gpe_number);
+	if (ACPI_FAILURE(status)) {
+
+		/* Conversion failed; invalid method, just ignore it */
+
+		ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
+				  "Could not extract GPE number from name: %s "
+				  "(name is not of form _Lxx or _Exx)", name));
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Ensure that we have a valid GPE number for this GPE block */
+
+	gpe_number = (u32)temp_gpe_number;
+	gpe_event_info =
+	    acpi_ev_low_get_gpe_info(gpe_number, walk_info->gpe_block);
+	if (!gpe_event_info) {
+		/*
+		 * This gpe_number is not valid for this GPE block, just ignore it.
+		 * However, it may be valid for a different GPE block, since GPE0
+		 * and GPE1 methods both appear under \_GPE.
+		 */
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	if ((ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) ==
+	     ACPI_GPE_DISPATCH_HANDLER) ||
+	    (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) ==
+	     ACPI_GPE_DISPATCH_RAW_HANDLER)) {
+
+		/* If there is already a handler, ignore this GPE method */
+
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) ==
+	    ACPI_GPE_DISPATCH_METHOD) {
+		/*
+		 * If there is already a method, ignore this method. But check
+		 * for a type mismatch (if both the _Lxx AND _Exx exist)
+		 */
+		if (type != (gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK)) {
+			ACPI_ERROR((AE_INFO,
+				    "For GPE 0x%.2X, found both _L%2.2X and _E%2.2X methods",
+				    gpe_number, gpe_number, gpe_number));
+		}
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Disable the GPE in case it's been enabled already. */
+
+	(void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
+
+	/*
+	 * Add the GPE information from above to the gpe_event_info block for
+	 * use during dispatch of this GPE.
+	 */
+	gpe_event_info->flags &= ~(ACPI_GPE_DISPATCH_MASK);
+	gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD);
+	gpe_event_info->dispatch.method_node = method_node;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
+			  "Registered GPE method %s as GPE number 0x%.2X\n",
+			  name, gpe_number));
+	return_ACPI_STATUS(AE_OK);
+}
+
+#endif				/* !ACPI_REDUCED_HARDWARE */