summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-max3191x.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/gpio/gpio-max3191x.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/gpio/gpio-max3191x.c')
-rw-r--r--drivers/gpio/gpio-max3191x.c495
1 files changed, 495 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-max3191x.c b/drivers/gpio/gpio-max3191x.c
new file mode 100644
index 0000000000..bbacc71463
--- /dev/null
+++ b/drivers/gpio/gpio-max3191x.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * gpio-max3191x.c - GPIO driver for Maxim MAX3191x industrial serializer
+ *
+ * Copyright (C) 2017 KUNBUS GmbH
+ *
+ * The MAX3191x makes 8 digital 24V inputs available via SPI.
+ * Multiple chips can be daisy-chained, the spec does not impose
+ * a limit on the number of chips and neither does this driver.
+ *
+ * Either of two modes is selectable: In 8-bit mode, only the state
+ * of the inputs is clocked out to achieve high readout speeds;
+ * In 16-bit mode, an additional status byte is clocked out with
+ * a CRC and indicator bits for undervoltage and overtemperature.
+ * The driver returns an error instead of potentially bogus data
+ * if any of these fault conditions occur. However it does allow
+ * readout of non-faulting chips in the same daisy-chain.
+ *
+ * MAX3191x supports four debounce settings and the driver is
+ * capable of configuring these differently for each chip in the
+ * daisy-chain.
+ *
+ * If the chips are hardwired to 8-bit mode ("modesel" pulled high),
+ * gpio-pisosr.c can be used alternatively to this driver.
+ *
+ * https://datasheets.maximintegrated.com/en/ds/MAX31910.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31911.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31912.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31913.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31953-MAX31963.pdf
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/crc8.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+enum max3191x_mode {
+ STATUS_BYTE_ENABLED,
+ STATUS_BYTE_DISABLED,
+};
+
+/**
+ * struct max3191x_chip - max3191x daisy-chain
+ * @gpio: GPIO controller struct
+ * @lock: protects read sequences
+ * @nchips: number of chips in the daisy-chain
+ * @mode: current mode, 0 for 16-bit, 1 for 8-bit;
+ * for simplicity, all chips in the daisy-chain are assumed
+ * to use the same mode
+ * @modesel_pins: GPIO pins to configure modesel of each chip
+ * @fault_pins: GPIO pins to detect fault of each chip
+ * @db0_pins: GPIO pins to configure debounce of each chip
+ * @db1_pins: GPIO pins to configure debounce of each chip
+ * @mesg: SPI message to perform a readout
+ * @xfer: SPI transfer used by @mesg
+ * @crc_error: bitmap signaling CRC error for each chip
+ * @overtemp: bitmap signaling overtemperature alarm for each chip
+ * @undervolt1: bitmap signaling undervoltage alarm for each chip
+ * @undervolt2: bitmap signaling undervoltage warning for each chip
+ * @fault: bitmap signaling assertion of @fault_pins for each chip
+ * @ignore_uv: whether to ignore undervoltage alarms;
+ * set by a device property if the chips are powered through
+ * 5VOUT instead of VCC24V, in which case they will constantly
+ * signal undervoltage;
+ * for simplicity, all chips in the daisy-chain are assumed
+ * to be powered the same way
+ */
+struct max3191x_chip {
+ struct gpio_chip gpio;
+ struct mutex lock;
+ u32 nchips;
+ enum max3191x_mode mode;
+ struct gpio_descs *modesel_pins;
+ struct gpio_descs *fault_pins;
+ struct gpio_descs *db0_pins;
+ struct gpio_descs *db1_pins;
+ struct spi_message mesg;
+ struct spi_transfer xfer;
+ unsigned long *crc_error;
+ unsigned long *overtemp;
+ unsigned long *undervolt1;
+ unsigned long *undervolt2;
+ unsigned long *fault;
+ bool ignore_uv;
+};
+
+#define MAX3191X_NGPIO 8
+#define MAX3191X_CRC8_POLYNOMIAL 0xa8 /* (x^5) + x^4 + x^2 + x^0 */
+
+DECLARE_CRC8_TABLE(max3191x_crc8);
+
+static int max3191x_get_direction(struct gpio_chip *gpio, unsigned int offset)
+{
+ return GPIO_LINE_DIRECTION_IN; /* always in */
+}
+
+static int max3191x_direction_input(struct gpio_chip *gpio, unsigned int offset)
+{
+ return 0;
+}
+
+static int max3191x_direction_output(struct gpio_chip *gpio,
+ unsigned int offset, int value)
+{
+ return -EINVAL;
+}
+
+static void max3191x_set(struct gpio_chip *gpio, unsigned int offset, int value)
+{ }
+
+static void max3191x_set_multiple(struct gpio_chip *gpio, unsigned long *mask,
+ unsigned long *bits)
+{ }
+
+static unsigned int max3191x_wordlen(struct max3191x_chip *max3191x)
+{
+ return max3191x->mode == STATUS_BYTE_ENABLED ? 2 : 1;
+}
+
+static int max3191x_readout_locked(struct max3191x_chip *max3191x)
+{
+ struct device *dev = max3191x->gpio.parent;
+ struct spi_device *spi = to_spi_device(dev);
+ int val, i, ot = 0, uv1 = 0;
+
+ val = spi_sync(spi, &max3191x->mesg);
+ if (val) {
+ dev_err_ratelimited(dev, "SPI receive error %d\n", val);
+ return val;
+ }
+
+ for (i = 0; i < max3191x->nchips; i++) {
+ if (max3191x->mode == STATUS_BYTE_ENABLED) {
+ u8 in = ((u8 *)max3191x->xfer.rx_buf)[i * 2];
+ u8 status = ((u8 *)max3191x->xfer.rx_buf)[i * 2 + 1];
+
+ val = (status & 0xf8) != crc8(max3191x_crc8, &in, 1, 0);
+ __assign_bit(i, max3191x->crc_error, val);
+ if (val)
+ dev_err_ratelimited(dev,
+ "chip %d: CRC error\n", i);
+
+ ot = (status >> 1) & 1;
+ __assign_bit(i, max3191x->overtemp, ot);
+ if (ot)
+ dev_err_ratelimited(dev,
+ "chip %d: overtemperature\n", i);
+
+ if (!max3191x->ignore_uv) {
+ uv1 = !((status >> 2) & 1);
+ __assign_bit(i, max3191x->undervolt1, uv1);
+ if (uv1)
+ dev_err_ratelimited(dev,
+ "chip %d: undervoltage\n", i);
+
+ val = !(status & 1);
+ __assign_bit(i, max3191x->undervolt2, val);
+ if (val && !uv1)
+ dev_warn_ratelimited(dev,
+ "chip %d: voltage warn\n", i);
+ }
+ }
+
+ if (max3191x->fault_pins && !max3191x->ignore_uv) {
+ /* fault pin shared by all chips or per chip */
+ struct gpio_desc *fault_pin =
+ (max3191x->fault_pins->ndescs == 1)
+ ? max3191x->fault_pins->desc[0]
+ : max3191x->fault_pins->desc[i];
+
+ val = gpiod_get_value_cansleep(fault_pin);
+ if (val < 0) {
+ dev_err_ratelimited(dev,
+ "GPIO read error %d\n", val);
+ return val;
+ }
+ __assign_bit(i, max3191x->fault, val);
+ if (val && !uv1 && !ot)
+ dev_err_ratelimited(dev,
+ "chip %d: fault\n", i);
+ }
+ }
+
+ return 0;
+}
+
+static bool max3191x_chip_is_faulting(struct max3191x_chip *max3191x,
+ unsigned int chipnum)
+{
+ /* without status byte the only diagnostic is the fault pin */
+ if (!max3191x->ignore_uv && test_bit(chipnum, max3191x->fault))
+ return true;
+
+ if (max3191x->mode == STATUS_BYTE_DISABLED)
+ return false;
+
+ return test_bit(chipnum, max3191x->crc_error) ||
+ test_bit(chipnum, max3191x->overtemp) ||
+ (!max3191x->ignore_uv &&
+ test_bit(chipnum, max3191x->undervolt1));
+}
+
+static int max3191x_get(struct gpio_chip *gpio, unsigned int offset)
+{
+ struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+ int ret, chipnum, wordlen = max3191x_wordlen(max3191x);
+ u8 in;
+
+ mutex_lock(&max3191x->lock);
+ ret = max3191x_readout_locked(max3191x);
+ if (ret)
+ goto out_unlock;
+
+ chipnum = offset / MAX3191X_NGPIO;
+ if (max3191x_chip_is_faulting(max3191x, chipnum)) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ in = ((u8 *)max3191x->xfer.rx_buf)[chipnum * wordlen];
+ ret = (in >> (offset % MAX3191X_NGPIO)) & 1;
+
+out_unlock:
+ mutex_unlock(&max3191x->lock);
+ return ret;
+}
+
+static int max3191x_get_multiple(struct gpio_chip *gpio, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+ const unsigned int wordlen = max3191x_wordlen(max3191x);
+ int ret;
+ unsigned long bit;
+ unsigned long gpio_mask;
+ unsigned long in;
+
+ mutex_lock(&max3191x->lock);
+ ret = max3191x_readout_locked(max3191x);
+ if (ret)
+ goto out_unlock;
+
+ bitmap_zero(bits, gpio->ngpio);
+ for_each_set_clump8(bit, gpio_mask, mask, gpio->ngpio) {
+ unsigned int chipnum = bit / MAX3191X_NGPIO;
+
+ if (max3191x_chip_is_faulting(max3191x, chipnum)) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ in = ((u8 *)max3191x->xfer.rx_buf)[chipnum * wordlen];
+ in &= gpio_mask;
+ bitmap_set_value8(bits, in, bit);
+ }
+
+out_unlock:
+ mutex_unlock(&max3191x->lock);
+ return ret;
+}
+
+static int max3191x_set_config(struct gpio_chip *gpio, unsigned int offset,
+ unsigned long config)
+{
+ struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+ u32 debounce, chipnum, db0_val, db1_val;
+
+ if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+ return -ENOTSUPP;
+
+ if (!max3191x->db0_pins || !max3191x->db1_pins)
+ return -EINVAL;
+
+ debounce = pinconf_to_config_argument(config);
+ switch (debounce) {
+ case 0:
+ db0_val = 0;
+ db1_val = 0;
+ break;
+ case 1 ... 25:
+ db0_val = 0;
+ db1_val = 1;
+ break;
+ case 26 ... 750:
+ db0_val = 1;
+ db1_val = 0;
+ break;
+ case 751 ... 3000:
+ db0_val = 1;
+ db1_val = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (max3191x->db0_pins->ndescs == 1)
+ chipnum = 0; /* all chips use the same pair of debounce pins */
+ else
+ chipnum = offset / MAX3191X_NGPIO; /* per chip debounce pins */
+
+ mutex_lock(&max3191x->lock);
+ gpiod_set_value_cansleep(max3191x->db0_pins->desc[chipnum], db0_val);
+ gpiod_set_value_cansleep(max3191x->db1_pins->desc[chipnum], db1_val);
+ mutex_unlock(&max3191x->lock);
+ return 0;
+}
+
+static void gpiod_set_array_single_value_cansleep(unsigned int ndescs,
+ struct gpio_desc **desc,
+ struct gpio_array *info,
+ int value)
+{
+ unsigned long *values;
+
+ values = bitmap_alloc(ndescs, GFP_KERNEL);
+ if (!values)
+ return;
+
+ if (value)
+ bitmap_fill(values, ndescs);
+ else
+ bitmap_zero(values, ndescs);
+
+ gpiod_set_array_value_cansleep(ndescs, desc, info, values);
+ bitmap_free(values);
+}
+
+static struct gpio_descs *devm_gpiod_get_array_optional_count(
+ struct device *dev, const char *con_id,
+ enum gpiod_flags flags, unsigned int expected)
+{
+ struct gpio_descs *descs;
+ int found = gpiod_count(dev, con_id);
+
+ if (found == -ENOENT)
+ return NULL;
+
+ if (found != expected && found != 1) {
+ dev_err(dev, "ignoring %s-gpios: found %d, expected %u or 1\n",
+ con_id, found, expected);
+ return NULL;
+ }
+
+ descs = devm_gpiod_get_array_optional(dev, con_id, flags);
+
+ if (IS_ERR(descs)) {
+ dev_err(dev, "failed to get %s-gpios: %ld\n",
+ con_id, PTR_ERR(descs));
+ return NULL;
+ }
+
+ return descs;
+}
+
+static int max3191x_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct max3191x_chip *max3191x;
+ int n, ret;
+
+ max3191x = devm_kzalloc(dev, sizeof(*max3191x), GFP_KERNEL);
+ if (!max3191x)
+ return -ENOMEM;
+ spi_set_drvdata(spi, max3191x);
+
+ max3191x->nchips = 1;
+ device_property_read_u32(dev, "#daisy-chained-devices",
+ &max3191x->nchips);
+
+ n = BITS_TO_LONGS(max3191x->nchips);
+ max3191x->crc_error = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+ max3191x->undervolt1 = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+ max3191x->undervolt2 = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+ max3191x->overtemp = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+ max3191x->fault = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+ max3191x->xfer.rx_buf = devm_kcalloc(dev, max3191x->nchips,
+ 2, GFP_KERNEL);
+ if (!max3191x->crc_error || !max3191x->undervolt1 ||
+ !max3191x->overtemp || !max3191x->undervolt2 ||
+ !max3191x->fault || !max3191x->xfer.rx_buf)
+ return -ENOMEM;
+
+ max3191x->modesel_pins = devm_gpiod_get_array_optional_count(dev,
+ "maxim,modesel", GPIOD_ASIS, max3191x->nchips);
+ max3191x->fault_pins = devm_gpiod_get_array_optional_count(dev,
+ "maxim,fault", GPIOD_IN, max3191x->nchips);
+ max3191x->db0_pins = devm_gpiod_get_array_optional_count(dev,
+ "maxim,db0", GPIOD_OUT_LOW, max3191x->nchips);
+ max3191x->db1_pins = devm_gpiod_get_array_optional_count(dev,
+ "maxim,db1", GPIOD_OUT_LOW, max3191x->nchips);
+
+ max3191x->mode = device_property_read_bool(dev, "maxim,modesel-8bit")
+ ? STATUS_BYTE_DISABLED : STATUS_BYTE_ENABLED;
+ if (max3191x->modesel_pins)
+ gpiod_set_array_single_value_cansleep(
+ max3191x->modesel_pins->ndescs,
+ max3191x->modesel_pins->desc,
+ max3191x->modesel_pins->info, max3191x->mode);
+
+ max3191x->ignore_uv = device_property_read_bool(dev,
+ "maxim,ignore-undervoltage");
+
+ if (max3191x->db0_pins && max3191x->db1_pins &&
+ max3191x->db0_pins->ndescs != max3191x->db1_pins->ndescs) {
+ dev_err(dev, "ignoring maxim,db*-gpios: array len mismatch\n");
+ devm_gpiod_put_array(dev, max3191x->db0_pins);
+ devm_gpiod_put_array(dev, max3191x->db1_pins);
+ max3191x->db0_pins = NULL;
+ max3191x->db1_pins = NULL;
+ }
+
+ max3191x->xfer.len = max3191x->nchips * max3191x_wordlen(max3191x);
+ spi_message_init_with_transfers(&max3191x->mesg, &max3191x->xfer, 1);
+
+ max3191x->gpio.label = spi->modalias;
+ max3191x->gpio.owner = THIS_MODULE;
+ max3191x->gpio.parent = dev;
+ max3191x->gpio.base = -1;
+ max3191x->gpio.ngpio = max3191x->nchips * MAX3191X_NGPIO;
+ max3191x->gpio.can_sleep = true;
+
+ max3191x->gpio.get_direction = max3191x_get_direction;
+ max3191x->gpio.direction_input = max3191x_direction_input;
+ max3191x->gpio.direction_output = max3191x_direction_output;
+ max3191x->gpio.set = max3191x_set;
+ max3191x->gpio.set_multiple = max3191x_set_multiple;
+ max3191x->gpio.get = max3191x_get;
+ max3191x->gpio.get_multiple = max3191x_get_multiple;
+ max3191x->gpio.set_config = max3191x_set_config;
+
+ mutex_init(&max3191x->lock);
+
+ ret = gpiochip_add_data(&max3191x->gpio, max3191x);
+ if (ret) {
+ mutex_destroy(&max3191x->lock);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void max3191x_remove(struct spi_device *spi)
+{
+ struct max3191x_chip *max3191x = spi_get_drvdata(spi);
+
+ gpiochip_remove(&max3191x->gpio);
+ mutex_destroy(&max3191x->lock);
+}
+
+static int __init max3191x_register_driver(struct spi_driver *sdrv)
+{
+ crc8_populate_msb(max3191x_crc8, MAX3191X_CRC8_POLYNOMIAL);
+ return spi_register_driver(sdrv);
+}
+
+static const struct of_device_id max3191x_of_id[] = {
+ { .compatible = "maxim,max31910" },
+ { .compatible = "maxim,max31911" },
+ { .compatible = "maxim,max31912" },
+ { .compatible = "maxim,max31913" },
+ { .compatible = "maxim,max31953" },
+ { .compatible = "maxim,max31963" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max3191x_of_id);
+
+static const struct spi_device_id max3191x_spi_id[] = {
+ { "max31910" },
+ { "max31911" },
+ { "max31912" },
+ { "max31913" },
+ { "max31953" },
+ { "max31963" },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, max3191x_spi_id);
+
+static struct spi_driver max3191x_driver = {
+ .driver = {
+ .name = "max3191x",
+ .of_match_table = max3191x_of_id,
+ },
+ .probe = max3191x_probe,
+ .remove = max3191x_remove,
+ .id_table = max3191x_spi_id,
+};
+module_driver(max3191x_driver, max3191x_register_driver, spi_unregister_driver);
+
+MODULE_AUTHOR("Lukas Wunner <lukas@wunner.de>");
+MODULE_DESCRIPTION("GPIO driver for Maxim MAX3191x industrial serializer");
+MODULE_LICENSE("GPL v2");