Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 159 insertions, 0 deletions

diff --git a/drivers/gpu/drm/armada/armada_510.c b/drivers/gpu/drm/armada/armada_510.c
new file mode 100644
index 0000000000..93cd7e1a08
--- /dev/null
+++ b/drivers/gpu/drm/armada/armada_510.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Russell King
+ *
+ * Armada 510 (aka Dove) variant support
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <drm/drm_probe_helper.h>
+#include "armada_crtc.h"
+#include "armada_drm.h"
+#include "armada_hw.h"
+
+struct armada510_variant_data {
+	struct clk *clks[4];
+	struct clk *sel_clk;
+};
+
+static int armada510_crtc_init(struct armada_crtc *dcrtc, struct device *dev)
+{
+	struct armada510_variant_data *v;
+	struct clk *clk;
+	int idx;
+
+	v = devm_kzalloc(dev, sizeof(*v), GFP_KERNEL);
+	if (!v)
+		return -ENOMEM;
+
+	dcrtc->variant_data = v;
+
+	if (dev->of_node) {
+		struct property *prop;
+		const char *s;
+
+		of_property_for_each_string(dev->of_node, "clock-names", prop,
+					    s) {
+			if (!strcmp(s, "ext_ref_clk0"))
+				idx = 0;
+			else if (!strcmp(s, "ext_ref_clk1"))
+				idx = 1;
+			else if (!strcmp(s, "plldivider"))
+				idx = 2;
+			else if (!strcmp(s, "axibus"))
+				idx = 3;
+			else
+				continue;
+
+			clk = devm_clk_get(dev, s);
+			if (IS_ERR(clk))
+				return PTR_ERR(clk) == -ENOENT ? -EPROBE_DEFER :
+					PTR_ERR(clk);
+			v->clks[idx] = clk;
+		}
+	} else {
+		clk = devm_clk_get(dev, "ext_ref_clk1");
+		if (IS_ERR(clk))
+			return PTR_ERR(clk) == -ENOENT ? -EPROBE_DEFER :
+				PTR_ERR(clk);
+
+		v->clks[1] = clk;
+	}
+
+	/*
+	 * Lower the watermark so to eliminate jitter at higher bandwidths.
+	 * Disable SRAM read wait state to avoid system hang with external
+	 * clock.
+	 */
+	armada_updatel(CFG_DMA_WM(0x20), CFG_SRAM_WAIT | CFG_DMA_WM_MASK,
+		       dcrtc->base + LCD_CFG_RDREG4F);
+
+	/* Initialise SPU register */
+	writel_relaxed(ADV_HWC32ENABLE | ADV_HWC32ARGB | ADV_HWC32BLEND,
+		       dcrtc->base + LCD_SPU_ADV_REG);
+
+	return 0;
+}
+
+static const u32 armada510_clk_sels[] = {
+	SCLK_510_EXTCLK0,
+	SCLK_510_EXTCLK1,
+	SCLK_510_PLL,
+	SCLK_510_AXI,
+};
+
+static const struct armada_clocking_params armada510_clocking = {
+	/* HDMI requires -0.6%..+0.5% */
+	.permillage_min = 994,
+	.permillage_max = 1005,
+	.settable = BIT(0) | BIT(1),
+	.div_max = SCLK_510_INT_DIV_MASK,
+};
+
+/*
+ * Armada510 specific SCLK register selection.
+ * This gets called with sclk = NULL to test whether the mode is
+ * supportable, and again with sclk != NULL to set the clocks up for
+ * that.  The former can return an error, but the latter is expected
+ * not to.
+ */
+static int armada510_crtc_compute_clock(struct armada_crtc *dcrtc,
+	const struct drm_display_mode *mode, uint32_t *sclk)
+{
+	struct armada510_variant_data *v = dcrtc->variant_data;
+	unsigned long desired_khz = mode->crtc_clock;
+	struct armada_clk_result res;
+	int ret, idx;
+
+	idx = armada_crtc_select_clock(dcrtc, &res, &armada510_clocking,
+				       v->clks, ARRAY_SIZE(v->clks),
+				       desired_khz);
+	if (idx < 0)
+		return idx;
+
+	ret = clk_prepare_enable(res.clk);
+	if (ret)
+		return ret;
+
+	if (sclk) {
+		clk_set_rate(res.clk, res.desired_clk_hz);
+
+		*sclk = res.div | armada510_clk_sels[idx];
+
+		/* We are now using this clock */
+		v->sel_clk = res.clk;
+		swap(dcrtc->clk, res.clk);
+	}
+
+	clk_disable_unprepare(res.clk);
+
+	return 0;
+}
+
+static void armada510_crtc_disable(struct armada_crtc *dcrtc)
+{
+	if (dcrtc->clk) {
+		clk_disable_unprepare(dcrtc->clk);
+		dcrtc->clk = NULL;
+	}
+}
+
+static void armada510_crtc_enable(struct armada_crtc *dcrtc,
+	const struct drm_display_mode *mode)
+{
+	struct armada510_variant_data *v = dcrtc->variant_data;
+
+	if (!dcrtc->clk && v->sel_clk) {
+		if (!WARN_ON(clk_prepare_enable(v->sel_clk)))
+			dcrtc->clk = v->sel_clk;
+	}
+}
+
+const struct armada_variant armada510_ops = {
+	.has_spu_adv_reg = true,
+	.init = armada510_crtc_init,
+	.compute_clock = armada510_crtc_compute_clock,
+	.disable = armada510_crtc_disable,
+	.enable = armada510_crtc_enable,
+};