diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/gpu/drm/bridge/analogix/analogix_dp_core.c')
-rw-r--r-- | drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 1910 |
1 files changed, 1910 insertions, 0 deletions
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c new file mode 100644 index 0000000000..df9370e0ff --- /dev/null +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -0,0 +1,1910 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Analogix DP (Display Port) core interface driver. +* +* Copyright (C) 2012 Samsung Electronics Co., Ltd. +* Author: Jingoo Han <jg1.han@samsung.com> +*/ + +#include <linux/clk.h> +#include <linux/component.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#include <drm/bridge/analogix_dp.h> +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_crtc.h> +#include <drm/drm_device.h> +#include <drm/drm_edid.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> +#include <drm/drm_probe_helper.h> + +#include "analogix_dp_core.h" +#include "analogix_dp_reg.h" + +#define to_dp(nm) container_of(nm, struct analogix_dp_device, nm) + +static const bool verify_fast_training; + +struct bridge_init { + struct i2c_client *client; + struct device_node *node; +}; + +static int analogix_dp_init_dp(struct analogix_dp_device *dp) +{ + int ret; + + analogix_dp_reset(dp); + + analogix_dp_swreset(dp); + + analogix_dp_init_analog_param(dp); + analogix_dp_init_interrupt(dp); + + /* SW defined function Normal operation */ + analogix_dp_enable_sw_function(dp); + + analogix_dp_config_interrupt(dp); + ret = analogix_dp_init_analog_func(dp); + if (ret) + return ret; + + analogix_dp_init_hpd(dp); + analogix_dp_init_aux(dp); + return 0; +} + +static int analogix_dp_detect_hpd(struct analogix_dp_device *dp) +{ + int timeout_loop = 0; + + while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) { + if (analogix_dp_get_plug_in_status(dp) == 0) + return 0; + + timeout_loop++; + usleep_range(1000, 1100); + } + + /* + * Some edp screen do not have hpd signal, so we can't just + * return failed when hpd plug in detect failed, DT property + * "force-hpd" would indicate whether driver need this. + */ + if (!dp->force_hpd) + return -ETIMEDOUT; + + /* + * The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH + * will not work, so we need to give a force hpd action to + * set HPD_STATUS manually. + */ + dev_dbg(dp->dev, "failed to get hpd plug status, try to force hpd\n"); + + analogix_dp_force_hpd(dp); + + if (analogix_dp_get_plug_in_status(dp) != 0) { + dev_err(dp->dev, "failed to get hpd plug in status\n"); + return -EINVAL; + } + + dev_dbg(dp->dev, "success to get plug in status after force hpd\n"); + + return 0; +} + +static bool analogix_dp_detect_sink_psr(struct analogix_dp_device *dp) +{ + unsigned char psr_version; + int ret; + + ret = drm_dp_dpcd_readb(&dp->aux, DP_PSR_SUPPORT, &psr_version); + if (ret != 1) { + dev_err(dp->dev, "failed to get PSR version, disable it\n"); + return false; + } + + dev_dbg(dp->dev, "Panel PSR version : %x\n", psr_version); + return psr_version & DP_PSR_IS_SUPPORTED; +} + +static int analogix_dp_enable_sink_psr(struct analogix_dp_device *dp) +{ + unsigned char psr_en; + int ret; + + /* Disable psr function */ + ret = drm_dp_dpcd_readb(&dp->aux, DP_PSR_EN_CFG, &psr_en); + if (ret != 1) { + dev_err(dp->dev, "failed to get psr config\n"); + goto end; + } + + psr_en &= ~DP_PSR_ENABLE; + ret = drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en); + if (ret != 1) { + dev_err(dp->dev, "failed to disable panel psr\n"); + goto end; + } + + /* Main-Link transmitter remains active during PSR active states */ + psr_en = DP_PSR_CRC_VERIFICATION; + ret = drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en); + if (ret != 1) { + dev_err(dp->dev, "failed to set panel psr\n"); + goto end; + } + + /* Enable psr function */ + psr_en = DP_PSR_ENABLE | DP_PSR_CRC_VERIFICATION; + ret = drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en); + if (ret != 1) { + dev_err(dp->dev, "failed to set panel psr\n"); + goto end; + } + + analogix_dp_enable_psr_crc(dp); + + dp->psr_supported = true; + + return 0; +end: + dev_err(dp->dev, "enable psr fail, force to disable psr\n"); + + return ret; +} + +static int +analogix_dp_enable_rx_to_enhanced_mode(struct analogix_dp_device *dp, + bool enable) +{ + u8 data; + int ret; + + ret = drm_dp_dpcd_readb(&dp->aux, DP_LANE_COUNT_SET, &data); + if (ret != 1) + return ret; + + if (enable) + ret = drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET, + DP_LANE_COUNT_ENHANCED_FRAME_EN | + DPCD_LANE_COUNT_SET(data)); + else + ret = drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET, + DPCD_LANE_COUNT_SET(data)); + + return ret < 0 ? ret : 0; +} + +static int analogix_dp_is_enhanced_mode_available(struct analogix_dp_device *dp, + u8 *enhanced_mode_support) +{ + u8 data; + int ret; + + ret = drm_dp_dpcd_readb(&dp->aux, DP_MAX_LANE_COUNT, &data); + if (ret != 1) { + *enhanced_mode_support = 0; + return ret; + } + + *enhanced_mode_support = DPCD_ENHANCED_FRAME_CAP(data); + + return 0; +} + +static int analogix_dp_set_enhanced_mode(struct analogix_dp_device *dp) +{ + u8 data; + int ret; + + ret = analogix_dp_is_enhanced_mode_available(dp, &data); + if (ret < 0) + return ret; + + ret = analogix_dp_enable_rx_to_enhanced_mode(dp, data); + if (ret < 0) + return ret; + + analogix_dp_enable_enhanced_mode(dp, data); + + return 0; +} + +static int analogix_dp_training_pattern_dis(struct analogix_dp_device *dp) +{ + int ret; + + analogix_dp_set_training_pattern(dp, DP_NONE); + + ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + DP_TRAINING_PATTERN_DISABLE); + + return ret < 0 ? ret : 0; +} + +static void +analogix_dp_set_lane_lane_pre_emphasis(struct analogix_dp_device *dp, + int pre_emphasis, int lane) +{ + switch (lane) { + case 0: + analogix_dp_set_lane0_pre_emphasis(dp, pre_emphasis); + break; + case 1: + analogix_dp_set_lane1_pre_emphasis(dp, pre_emphasis); + break; + + case 2: + analogix_dp_set_lane2_pre_emphasis(dp, pre_emphasis); + break; + + case 3: + analogix_dp_set_lane3_pre_emphasis(dp, pre_emphasis); + break; + } +} + +static int analogix_dp_link_start(struct analogix_dp_device *dp) +{ + u8 buf[4]; + int lane, lane_count, pll_tries, retval; + + lane_count = dp->link_train.lane_count; + + dp->link_train.lt_state = CLOCK_RECOVERY; + dp->link_train.eq_loop = 0; + + for (lane = 0; lane < lane_count; lane++) + dp->link_train.cr_loop[lane] = 0; + + /* Set link rate and count as you want to establish*/ + analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate); + analogix_dp_set_lane_count(dp, dp->link_train.lane_count); + + /* Setup RX configuration */ + buf[0] = dp->link_train.link_rate; + buf[1] = dp->link_train.lane_count; + retval = drm_dp_dpcd_write(&dp->aux, DP_LINK_BW_SET, buf, 2); + if (retval < 0) + return retval; + /* set enhanced mode if available */ + retval = analogix_dp_set_enhanced_mode(dp); + if (retval < 0) { + dev_err(dp->dev, "failed to set enhance mode\n"); + return retval; + } + + /* Set TX pre-emphasis to minimum */ + for (lane = 0; lane < lane_count; lane++) + analogix_dp_set_lane_lane_pre_emphasis(dp, + PRE_EMPHASIS_LEVEL_0, lane); + + /* Wait for PLL lock */ + pll_tries = 0; + while (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { + if (pll_tries == DP_TIMEOUT_LOOP_COUNT) { + dev_err(dp->dev, "Wait for PLL lock timed out\n"); + return -ETIMEDOUT; + } + + pll_tries++; + usleep_range(90, 120); + } + + /* Set training pattern 1 */ + analogix_dp_set_training_pattern(dp, TRAINING_PTN1); + + /* Set RX training pattern */ + retval = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + DP_LINK_SCRAMBLING_DISABLE | + DP_TRAINING_PATTERN_1); + if (retval < 0) + return retval; + + for (lane = 0; lane < lane_count; lane++) + buf[lane] = DP_TRAIN_PRE_EMPH_LEVEL_0 | + DP_TRAIN_VOLTAGE_SWING_LEVEL_0; + + retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET, buf, + lane_count); + if (retval < 0) + return retval; + + return 0; +} + +static unsigned char analogix_dp_get_lane_status(u8 link_status[2], int lane) +{ + int shift = (lane & 1) * 4; + u8 link_value = link_status[lane >> 1]; + + return (link_value >> shift) & 0xf; +} + +static int analogix_dp_clock_recovery_ok(u8 link_status[2], int lane_count) +{ + int lane; + u8 lane_status; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = analogix_dp_get_lane_status(link_status, lane); + if ((lane_status & DP_LANE_CR_DONE) == 0) + return -EINVAL; + } + return 0; +} + +static int analogix_dp_channel_eq_ok(u8 link_status[2], u8 link_align, + int lane_count) +{ + int lane; + u8 lane_status; + + if ((link_align & DP_INTERLANE_ALIGN_DONE) == 0) + return -EINVAL; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = analogix_dp_get_lane_status(link_status, lane); + lane_status &= DP_CHANNEL_EQ_BITS; + if (lane_status != DP_CHANNEL_EQ_BITS) + return -EINVAL; + } + + return 0; +} + +static unsigned char +analogix_dp_get_adjust_request_voltage(u8 adjust_request[2], int lane) +{ + int shift = (lane & 1) * 4; + u8 link_value = adjust_request[lane >> 1]; + + return (link_value >> shift) & 0x3; +} + +static unsigned char analogix_dp_get_adjust_request_pre_emphasis( + u8 adjust_request[2], + int lane) +{ + int shift = (lane & 1) * 4; + u8 link_value = adjust_request[lane >> 1]; + + return ((link_value >> shift) & 0xc) >> 2; +} + +static void analogix_dp_set_lane_link_training(struct analogix_dp_device *dp, + u8 training_lane_set, int lane) +{ + switch (lane) { + case 0: + analogix_dp_set_lane0_link_training(dp, training_lane_set); + break; + case 1: + analogix_dp_set_lane1_link_training(dp, training_lane_set); + break; + + case 2: + analogix_dp_set_lane2_link_training(dp, training_lane_set); + break; + + case 3: + analogix_dp_set_lane3_link_training(dp, training_lane_set); + break; + } +} + +static unsigned int +analogix_dp_get_lane_link_training(struct analogix_dp_device *dp, + int lane) +{ + u32 reg; + + switch (lane) { + case 0: + reg = analogix_dp_get_lane0_link_training(dp); + break; + case 1: + reg = analogix_dp_get_lane1_link_training(dp); + break; + case 2: + reg = analogix_dp_get_lane2_link_training(dp); + break; + case 3: + reg = analogix_dp_get_lane3_link_training(dp); + break; + default: + WARN_ON(1); + return 0; + } + + return reg; +} + +static void analogix_dp_reduce_link_rate(struct analogix_dp_device *dp) +{ + analogix_dp_training_pattern_dis(dp); + analogix_dp_set_enhanced_mode(dp); + + dp->link_train.lt_state = FAILED; +} + +static void analogix_dp_get_adjust_training_lane(struct analogix_dp_device *dp, + u8 adjust_request[2]) +{ + int lane, lane_count; + u8 voltage_swing, pre_emphasis, training_lane; + + lane_count = dp->link_train.lane_count; + for (lane = 0; lane < lane_count; lane++) { + voltage_swing = analogix_dp_get_adjust_request_voltage( + adjust_request, lane); + pre_emphasis = analogix_dp_get_adjust_request_pre_emphasis( + adjust_request, lane); + training_lane = DPCD_VOLTAGE_SWING_SET(voltage_swing) | + DPCD_PRE_EMPHASIS_SET(pre_emphasis); + + if (voltage_swing == VOLTAGE_LEVEL_3) + training_lane |= DP_TRAIN_MAX_SWING_REACHED; + if (pre_emphasis == PRE_EMPHASIS_LEVEL_3) + training_lane |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + + dp->link_train.training_lane[lane] = training_lane; + } +} + +static int analogix_dp_process_clock_recovery(struct analogix_dp_device *dp) +{ + int lane, lane_count, retval; + u8 voltage_swing, pre_emphasis, training_lane; + u8 link_status[2], adjust_request[2]; + + usleep_range(100, 101); + + lane_count = dp->link_train.lane_count; + + retval = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, 2); + if (retval < 0) + return retval; + + retval = drm_dp_dpcd_read(&dp->aux, DP_ADJUST_REQUEST_LANE0_1, + adjust_request, 2); + if (retval < 0) + return retval; + + if (analogix_dp_clock_recovery_ok(link_status, lane_count) == 0) { + /* set training pattern 2 for EQ */ + analogix_dp_set_training_pattern(dp, TRAINING_PTN2); + + retval = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + DP_LINK_SCRAMBLING_DISABLE | + DP_TRAINING_PATTERN_2); + if (retval < 0) + return retval; + + dev_dbg(dp->dev, "Link Training Clock Recovery success\n"); + dp->link_train.lt_state = EQUALIZER_TRAINING; + } else { + for (lane = 0; lane < lane_count; lane++) { + training_lane = analogix_dp_get_lane_link_training( + dp, lane); + voltage_swing = analogix_dp_get_adjust_request_voltage( + adjust_request, lane); + pre_emphasis = analogix_dp_get_adjust_request_pre_emphasis( + adjust_request, lane); + + if (DPCD_VOLTAGE_SWING_GET(training_lane) == + voltage_swing && + DPCD_PRE_EMPHASIS_GET(training_lane) == + pre_emphasis) + dp->link_train.cr_loop[lane]++; + + if (dp->link_train.cr_loop[lane] == MAX_CR_LOOP || + voltage_swing == VOLTAGE_LEVEL_3 || + pre_emphasis == PRE_EMPHASIS_LEVEL_3) { + dev_err(dp->dev, "CR Max reached (%d,%d,%d)\n", + dp->link_train.cr_loop[lane], + voltage_swing, pre_emphasis); + analogix_dp_reduce_link_rate(dp); + return -EIO; + } + } + } + + analogix_dp_get_adjust_training_lane(dp, adjust_request); + + for (lane = 0; lane < lane_count; lane++) + analogix_dp_set_lane_link_training(dp, + dp->link_train.training_lane[lane], lane); + + retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET, + dp->link_train.training_lane, lane_count); + if (retval < 0) + return retval; + + return 0; +} + +static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp) +{ + int lane, lane_count, retval; + u32 reg; + u8 link_align, link_status[2], adjust_request[2]; + + usleep_range(400, 401); + + lane_count = dp->link_train.lane_count; + + retval = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, 2); + if (retval < 0) + return retval; + + if (analogix_dp_clock_recovery_ok(link_status, lane_count)) { + analogix_dp_reduce_link_rate(dp); + return -EIO; + } + + retval = drm_dp_dpcd_read(&dp->aux, DP_ADJUST_REQUEST_LANE0_1, + adjust_request, 2); + if (retval < 0) + return retval; + + retval = drm_dp_dpcd_readb(&dp->aux, DP_LANE_ALIGN_STATUS_UPDATED, + &link_align); + if (retval < 0) + return retval; + + analogix_dp_get_adjust_training_lane(dp, adjust_request); + + if (!analogix_dp_channel_eq_ok(link_status, link_align, lane_count)) { + /* traing pattern Set to Normal */ + retval = analogix_dp_training_pattern_dis(dp); + if (retval < 0) + return retval; + + dev_dbg(dp->dev, "Link Training success!\n"); + analogix_dp_get_link_bandwidth(dp, ®); + dp->link_train.link_rate = reg; + dev_dbg(dp->dev, "final bandwidth = %.2x\n", + dp->link_train.link_rate); + + analogix_dp_get_lane_count(dp, ®); + dp->link_train.lane_count = reg; + dev_dbg(dp->dev, "final lane count = %.2x\n", + dp->link_train.lane_count); + + dp->link_train.lt_state = FINISHED; + + return 0; + } + + /* not all locked */ + dp->link_train.eq_loop++; + + if (dp->link_train.eq_loop > MAX_EQ_LOOP) { + dev_err(dp->dev, "EQ Max loop\n"); + analogix_dp_reduce_link_rate(dp); + return -EIO; + } + + for (lane = 0; lane < lane_count; lane++) + analogix_dp_set_lane_link_training(dp, + dp->link_train.training_lane[lane], lane); + + retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET, + dp->link_train.training_lane, lane_count); + if (retval < 0) + return retval; + + return 0; +} + +static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp, + u8 *bandwidth) +{ + u8 data; + + /* + * For DP rev.1.1, Maximum link rate of Main Link lanes + * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps + * For DP rev.1.2, Maximum link rate of Main Link lanes + * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps + */ + drm_dp_dpcd_readb(&dp->aux, DP_MAX_LINK_RATE, &data); + *bandwidth = data; +} + +static void analogix_dp_get_max_rx_lane_count(struct analogix_dp_device *dp, + u8 *lane_count) +{ + u8 data; + + /* + * For DP rev.1.1, Maximum number of Main Link lanes + * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes + */ + drm_dp_dpcd_readb(&dp->aux, DP_MAX_LANE_COUNT, &data); + *lane_count = DPCD_MAX_LANE_COUNT(data); +} + +static int analogix_dp_full_link_train(struct analogix_dp_device *dp, + u32 max_lanes, u32 max_rate) +{ + int retval = 0; + bool training_finished = false; + + /* + * MACRO_RST must be applied after the PLL_LOCK to avoid + * the DP inter pair skew issue for at least 10 us + */ + analogix_dp_reset_macro(dp); + + /* Initialize by reading RX's DPCD */ + analogix_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate); + analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count); + + if ((dp->link_train.link_rate != DP_LINK_BW_1_62) && + (dp->link_train.link_rate != DP_LINK_BW_2_7) && + (dp->link_train.link_rate != DP_LINK_BW_5_4)) { + dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n", + dp->link_train.link_rate); + dp->link_train.link_rate = DP_LINK_BW_1_62; + } + + if (dp->link_train.lane_count == 0) { + dev_err(dp->dev, "Rx Max Lane count is abnormal :%x !\n", + dp->link_train.lane_count); + dp->link_train.lane_count = (u8)LANE_COUNT1; + } + + /* Setup TX lane count & rate */ + if (dp->link_train.lane_count > max_lanes) + dp->link_train.lane_count = max_lanes; + if (dp->link_train.link_rate > max_rate) + dp->link_train.link_rate = max_rate; + + /* All DP analog module power up */ + analogix_dp_set_analog_power_down(dp, POWER_ALL, 0); + + dp->link_train.lt_state = START; + + /* Process here */ + while (!retval && !training_finished) { + switch (dp->link_train.lt_state) { + case START: + retval = analogix_dp_link_start(dp); + if (retval) + dev_err(dp->dev, "LT link start failed!\n"); + break; + case CLOCK_RECOVERY: + retval = analogix_dp_process_clock_recovery(dp); + if (retval) + dev_err(dp->dev, "LT CR failed!\n"); + break; + case EQUALIZER_TRAINING: + retval = analogix_dp_process_equalizer_training(dp); + if (retval) + dev_err(dp->dev, "LT EQ failed!\n"); + break; + case FINISHED: + training_finished = 1; + break; + case FAILED: + return -EREMOTEIO; + } + } + if (retval) + dev_err(dp->dev, "eDP link training failed (%d)\n", retval); + + return retval; +} + +static int analogix_dp_fast_link_train(struct analogix_dp_device *dp) +{ + int i, ret; + u8 link_align, link_status[2]; + enum pll_status status; + + analogix_dp_reset_macro(dp); + + analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate); + analogix_dp_set_lane_count(dp, dp->link_train.lane_count); + + for (i = 0; i < dp->link_train.lane_count; i++) { + analogix_dp_set_lane_link_training(dp, + dp->link_train.training_lane[i], i); + } + + ret = readx_poll_timeout(analogix_dp_get_pll_lock_status, dp, status, + status != PLL_UNLOCKED, 120, + 120 * DP_TIMEOUT_LOOP_COUNT); + if (ret) { + DRM_DEV_ERROR(dp->dev, "Wait for pll lock failed %d\n", ret); + return ret; + } + + /* source Set training pattern 1 */ + analogix_dp_set_training_pattern(dp, TRAINING_PTN1); + /* From DP spec, pattern must be on-screen for a minimum 500us */ + usleep_range(500, 600); + + analogix_dp_set_training_pattern(dp, TRAINING_PTN2); + /* From DP spec, pattern must be on-screen for a minimum 500us */ + usleep_range(500, 600); + + /* TODO: enhanced_mode?*/ + analogix_dp_set_training_pattern(dp, DP_NONE); + + /* + * Useful for debugging issues with fast link training, disable for more + * speed + */ + if (verify_fast_training) { + ret = drm_dp_dpcd_readb(&dp->aux, DP_LANE_ALIGN_STATUS_UPDATED, + &link_align); + if (ret < 0) { + DRM_DEV_ERROR(dp->dev, "Read align status failed %d\n", + ret); + return ret; + } + + ret = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, + 2); + if (ret < 0) { + DRM_DEV_ERROR(dp->dev, "Read link status failed %d\n", + ret); + return ret; + } + + if (analogix_dp_clock_recovery_ok(link_status, + dp->link_train.lane_count)) { + DRM_DEV_ERROR(dp->dev, "Clock recovery failed\n"); + analogix_dp_reduce_link_rate(dp); + return -EIO; + } + + if (analogix_dp_channel_eq_ok(link_status, link_align, + dp->link_train.lane_count)) { + DRM_DEV_ERROR(dp->dev, "Channel EQ failed\n"); + analogix_dp_reduce_link_rate(dp); + return -EIO; + } + } + + return 0; +} + +static int analogix_dp_train_link(struct analogix_dp_device *dp) +{ + if (dp->fast_train_enable) + return analogix_dp_fast_link_train(dp); + + return analogix_dp_full_link_train(dp, dp->video_info.max_lane_count, + dp->video_info.max_link_rate); +} + +static int analogix_dp_config_video(struct analogix_dp_device *dp) +{ + int timeout_loop = 0; + int done_count = 0; + + analogix_dp_config_video_slave_mode(dp); + + analogix_dp_set_video_color_format(dp); + + if (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { + dev_err(dp->dev, "PLL is not locked yet.\n"); + return -EINVAL; + } + + for (;;) { + timeout_loop++; + if (analogix_dp_is_slave_video_stream_clock_on(dp) == 0) + break; + if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) { + dev_err(dp->dev, "Timeout of slave video streamclk ok\n"); + return -ETIMEDOUT; + } + usleep_range(1000, 1001); + } + + /* Set to use the register calculated M/N video */ + analogix_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0); + + /* For video bist, Video timing must be generated by register */ + analogix_dp_set_video_timing_mode(dp, VIDEO_TIMING_FROM_CAPTURE); + + /* Disable video mute */ + analogix_dp_enable_video_mute(dp, 0); + + /* Configure video slave mode */ + analogix_dp_enable_video_master(dp, 0); + + /* Enable video */ + analogix_dp_start_video(dp); + + timeout_loop = 0; + + for (;;) { + timeout_loop++; + if (analogix_dp_is_video_stream_on(dp) == 0) { + done_count++; + if (done_count > 10) + break; + } else if (done_count) { + done_count = 0; + } + if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) { + dev_warn(dp->dev, + "Ignoring timeout of video streamclk ok\n"); + break; + } + + usleep_range(1000, 1001); + } + + return 0; +} + +static int analogix_dp_enable_scramble(struct analogix_dp_device *dp, + bool enable) +{ + u8 data; + int ret; + + if (enable) { + analogix_dp_enable_scrambling(dp); + + ret = drm_dp_dpcd_readb(&dp->aux, DP_TRAINING_PATTERN_SET, + &data); + if (ret != 1) + return ret; + ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + (u8)(data & ~DP_LINK_SCRAMBLING_DISABLE)); + } else { + analogix_dp_disable_scrambling(dp); + + ret = drm_dp_dpcd_readb(&dp->aux, DP_TRAINING_PATTERN_SET, + &data); + if (ret != 1) + return ret; + ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + (u8)(data | DP_LINK_SCRAMBLING_DISABLE)); + } + return ret < 0 ? ret : 0; +} + +static irqreturn_t analogix_dp_hardirq(int irq, void *arg) +{ + struct analogix_dp_device *dp = arg; + irqreturn_t ret = IRQ_NONE; + enum dp_irq_type irq_type; + + irq_type = analogix_dp_get_irq_type(dp); + if (irq_type != DP_IRQ_TYPE_UNKNOWN) { + analogix_dp_mute_hpd_interrupt(dp); + ret = IRQ_WAKE_THREAD; + } + + return ret; +} + +static irqreturn_t analogix_dp_irq_thread(int irq, void *arg) +{ + struct analogix_dp_device *dp = arg; + enum dp_irq_type irq_type; + + irq_type = analogix_dp_get_irq_type(dp); + if (irq_type & DP_IRQ_TYPE_HP_CABLE_IN || + irq_type & DP_IRQ_TYPE_HP_CABLE_OUT) { + dev_dbg(dp->dev, "Detected cable status changed!\n"); + if (dp->drm_dev) + drm_helper_hpd_irq_event(dp->drm_dev); + } + + if (irq_type != DP_IRQ_TYPE_UNKNOWN) { + analogix_dp_clear_hotplug_interrupts(dp); + analogix_dp_unmute_hpd_interrupt(dp); + } + + return IRQ_HANDLED; +} + +static int analogix_dp_fast_link_train_detection(struct analogix_dp_device *dp) +{ + int ret; + u8 spread; + + ret = drm_dp_dpcd_readb(&dp->aux, DP_MAX_DOWNSPREAD, &spread); + if (ret != 1) { + dev_err(dp->dev, "failed to read downspread %d\n", ret); + return ret; + } + dp->fast_train_enable = !!(spread & DP_NO_AUX_HANDSHAKE_LINK_TRAINING); + dev_dbg(dp->dev, "fast link training %s\n", + dp->fast_train_enable ? "supported" : "unsupported"); + return 0; +} + +static int analogix_dp_commit(struct analogix_dp_device *dp) +{ + int ret; + + /* Keep the panel disabled while we configure video */ + if (dp->plat_data->panel) { + if (drm_panel_disable(dp->plat_data->panel)) + DRM_ERROR("failed to disable the panel\n"); + } + + ret = analogix_dp_train_link(dp); + if (ret) { + dev_err(dp->dev, "unable to do link train, ret=%d\n", ret); + return ret; + } + + ret = analogix_dp_enable_scramble(dp, 1); + if (ret < 0) { + dev_err(dp->dev, "can not enable scramble\n"); + return ret; + } + + analogix_dp_init_video(dp); + ret = analogix_dp_config_video(dp); + if (ret) { + dev_err(dp->dev, "unable to config video\n"); + return ret; + } + + /* Safe to enable the panel now */ + if (dp->plat_data->panel) { + ret = drm_panel_enable(dp->plat_data->panel); + if (ret) { + DRM_ERROR("failed to enable the panel\n"); + return ret; + } + } + + /* Check whether panel supports fast training */ + ret = analogix_dp_fast_link_train_detection(dp); + if (ret) + return ret; + + if (analogix_dp_detect_sink_psr(dp)) { + ret = analogix_dp_enable_sink_psr(dp); + if (ret) + return ret; + } + + return ret; +} + +static int analogix_dp_enable_psr(struct analogix_dp_device *dp) +{ + struct dp_sdp psr_vsc; + int ret; + u8 sink; + + ret = drm_dp_dpcd_readb(&dp->aux, DP_PSR_STATUS, &sink); + if (ret != 1) + DRM_DEV_ERROR(dp->dev, "Failed to read psr status %d\n", ret); + else if (sink == DP_PSR_SINK_ACTIVE_RFB) + return 0; + + /* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */ + memset(&psr_vsc, 0, sizeof(psr_vsc)); + psr_vsc.sdp_header.HB0 = 0; + psr_vsc.sdp_header.HB1 = 0x7; + psr_vsc.sdp_header.HB2 = 0x2; + psr_vsc.sdp_header.HB3 = 0x8; + psr_vsc.db[0] = 0; + psr_vsc.db[1] = EDP_VSC_PSR_STATE_ACTIVE | EDP_VSC_PSR_CRC_VALUES_VALID; + + ret = analogix_dp_send_psr_spd(dp, &psr_vsc, true); + if (!ret) + analogix_dp_set_analog_power_down(dp, POWER_ALL, true); + + return ret; +} + +static int analogix_dp_disable_psr(struct analogix_dp_device *dp) +{ + struct dp_sdp psr_vsc; + int ret; + u8 sink; + + analogix_dp_set_analog_power_down(dp, POWER_ALL, false); + + ret = drm_dp_dpcd_writeb(&dp->aux, DP_SET_POWER, DP_SET_POWER_D0); + if (ret != 1) { + DRM_DEV_ERROR(dp->dev, "Failed to set DP Power0 %d\n", ret); + return ret; + } + + ret = drm_dp_dpcd_readb(&dp->aux, DP_PSR_STATUS, &sink); + if (ret != 1) { + DRM_DEV_ERROR(dp->dev, "Failed to read psr status %d\n", ret); + return ret; + } else if (sink == DP_PSR_SINK_INACTIVE) { + DRM_DEV_ERROR(dp->dev, "sink inactive, skip disable psr"); + return 0; + } + + ret = analogix_dp_train_link(dp); + if (ret) { + DRM_DEV_ERROR(dp->dev, "Failed to train the link %d\n", ret); + return ret; + } + + /* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */ + memset(&psr_vsc, 0, sizeof(psr_vsc)); + psr_vsc.sdp_header.HB0 = 0; + psr_vsc.sdp_header.HB1 = 0x7; + psr_vsc.sdp_header.HB2 = 0x2; + psr_vsc.sdp_header.HB3 = 0x8; + + psr_vsc.db[0] = 0; + psr_vsc.db[1] = 0; + + return analogix_dp_send_psr_spd(dp, &psr_vsc, true); +} + +/* + * This function is a bit of a catch-all for panel preparation, hopefully + * simplifying the logic of functions that need to prepare/unprepare the panel + * below. + * + * If @prepare is true, this function will prepare the panel. Conversely, if it + * is false, the panel will be unprepared. + * + * If @is_modeset_prepare is true, the function will disregard the current state + * of the panel and either prepare/unprepare the panel based on @prepare. Once + * it finishes, it will update dp->panel_is_modeset to reflect the current state + * of the panel. + */ +static int analogix_dp_prepare_panel(struct analogix_dp_device *dp, + bool prepare, bool is_modeset_prepare) +{ + int ret = 0; + + if (!dp->plat_data->panel) + return 0; + + mutex_lock(&dp->panel_lock); + + /* + * Exit early if this is a temporary prepare/unprepare and we're already + * modeset (since we neither want to prepare twice or unprepare early). + */ + if (dp->panel_is_modeset && !is_modeset_prepare) + goto out; + + if (prepare) + ret = drm_panel_prepare(dp->plat_data->panel); + else + ret = drm_panel_unprepare(dp->plat_data->panel); + + if (ret) + goto out; + + if (is_modeset_prepare) + dp->panel_is_modeset = prepare; + +out: + mutex_unlock(&dp->panel_lock); + return ret; +} + +static int analogix_dp_get_modes(struct drm_connector *connector) +{ + struct analogix_dp_device *dp = to_dp(connector); + struct edid *edid; + int ret, num_modes = 0; + + if (dp->plat_data->panel) { + num_modes += drm_panel_get_modes(dp->plat_data->panel, connector); + } else { + ret = analogix_dp_prepare_panel(dp, true, false); + if (ret) { + DRM_ERROR("Failed to prepare panel (%d)\n", ret); + return 0; + } + + edid = drm_get_edid(connector, &dp->aux.ddc); + if (edid) { + drm_connector_update_edid_property(&dp->connector, + edid); + num_modes += drm_add_edid_modes(&dp->connector, edid); + kfree(edid); + } + + ret = analogix_dp_prepare_panel(dp, false, false); + if (ret) + DRM_ERROR("Failed to unprepare panel (%d)\n", ret); + } + + if (dp->plat_data->get_modes) + num_modes += dp->plat_data->get_modes(dp->plat_data, connector); + + return num_modes; +} + +static struct drm_encoder * +analogix_dp_best_encoder(struct drm_connector *connector) +{ + struct analogix_dp_device *dp = to_dp(connector); + + return dp->encoder; +} + + +static int analogix_dp_atomic_check(struct drm_connector *connector, + struct drm_atomic_state *state) +{ + struct analogix_dp_device *dp = to_dp(connector); + struct drm_connector_state *conn_state; + struct drm_crtc_state *crtc_state; + + conn_state = drm_atomic_get_new_connector_state(state, connector); + if (WARN_ON(!conn_state)) + return -ENODEV; + + conn_state->self_refresh_aware = true; + + if (!conn_state->crtc) + return 0; + + crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); + if (!crtc_state) + return 0; + + if (crtc_state->self_refresh_active && !dp->psr_supported) + return -EINVAL; + + return 0; +} + +static const struct drm_connector_helper_funcs analogix_dp_connector_helper_funcs = { + .get_modes = analogix_dp_get_modes, + .best_encoder = analogix_dp_best_encoder, + .atomic_check = analogix_dp_atomic_check, +}; + +static enum drm_connector_status +analogix_dp_detect(struct drm_connector *connector, bool force) +{ + struct analogix_dp_device *dp = to_dp(connector); + enum drm_connector_status status = connector_status_disconnected; + int ret; + + if (dp->plat_data->panel) + return connector_status_connected; + + ret = analogix_dp_prepare_panel(dp, true, false); + if (ret) { + DRM_ERROR("Failed to prepare panel (%d)\n", ret); + return connector_status_disconnected; + } + + if (!analogix_dp_detect_hpd(dp)) + status = connector_status_connected; + + ret = analogix_dp_prepare_panel(dp, false, false); + if (ret) + DRM_ERROR("Failed to unprepare panel (%d)\n", ret); + + return status; +} + +static const struct drm_connector_funcs analogix_dp_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .detect = analogix_dp_detect, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int analogix_dp_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct analogix_dp_device *dp = bridge->driver_private; + struct drm_encoder *encoder = dp->encoder; + struct drm_connector *connector = NULL; + int ret = 0; + + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + + if (!bridge->encoder) { + DRM_ERROR("Parent encoder object not found"); + return -ENODEV; + } + + if (!dp->plat_data->skip_connector) { + connector = &dp->connector; + connector->polled = DRM_CONNECTOR_POLL_HPD; + + ret = drm_connector_init(dp->drm_dev, connector, + &analogix_dp_connector_funcs, + DRM_MODE_CONNECTOR_eDP); + if (ret) { + DRM_ERROR("Failed to initialize connector with drm\n"); + return ret; + } + + drm_connector_helper_add(connector, + &analogix_dp_connector_helper_funcs); + drm_connector_attach_encoder(connector, encoder); + } + + /* + * NOTE: the connector registration is implemented in analogix + * platform driver, that to say connector would be exist after + * plat_data->attch return, that's why we record the connector + * point after plat attached. + */ + if (dp->plat_data->attach) { + ret = dp->plat_data->attach(dp->plat_data, bridge, connector); + if (ret) { + DRM_ERROR("Failed at platform attach func\n"); + return ret; + } + } + + return 0; +} + +static +struct drm_crtc *analogix_dp_get_old_crtc(struct analogix_dp_device *dp, + struct drm_atomic_state *state) +{ + struct drm_encoder *encoder = dp->encoder; + struct drm_connector *connector; + struct drm_connector_state *conn_state; + + connector = drm_atomic_get_old_connector_for_encoder(state, encoder); + if (!connector) + return NULL; + + conn_state = drm_atomic_get_old_connector_state(state, connector); + if (!conn_state) + return NULL; + + return conn_state->crtc; +} + +static +struct drm_crtc *analogix_dp_get_new_crtc(struct analogix_dp_device *dp, + struct drm_atomic_state *state) +{ + struct drm_encoder *encoder = dp->encoder; + struct drm_connector *connector; + struct drm_connector_state *conn_state; + + connector = drm_atomic_get_new_connector_for_encoder(state, encoder); + if (!connector) + return NULL; + + conn_state = drm_atomic_get_new_connector_state(state, connector); + if (!conn_state) + return NULL; + + return conn_state->crtc; +} + +static void +analogix_dp_bridge_atomic_pre_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct drm_atomic_state *old_state = old_bridge_state->base.state; + struct analogix_dp_device *dp = bridge->driver_private; + struct drm_crtc *crtc; + struct drm_crtc_state *old_crtc_state; + int ret; + + crtc = analogix_dp_get_new_crtc(dp, old_state); + if (!crtc) + return; + + old_crtc_state = drm_atomic_get_old_crtc_state(old_state, crtc); + /* Don't touch the panel if we're coming back from PSR */ + if (old_crtc_state && old_crtc_state->self_refresh_active) + return; + + ret = analogix_dp_prepare_panel(dp, true, true); + if (ret) + DRM_ERROR("failed to setup the panel ret = %d\n", ret); +} + +static int analogix_dp_set_bridge(struct analogix_dp_device *dp) +{ + int ret; + + pm_runtime_get_sync(dp->dev); + + ret = clk_prepare_enable(dp->clock); + if (ret < 0) { + DRM_ERROR("Failed to prepare_enable the clock clk [%d]\n", ret); + goto out_dp_clk_pre; + } + + if (dp->plat_data->power_on_start) + dp->plat_data->power_on_start(dp->plat_data); + + phy_power_on(dp->phy); + + ret = analogix_dp_init_dp(dp); + if (ret) + goto out_dp_init; + + /* + * According to DP spec v1.3 chap 3.5.1.2 Link Training, + * We should first make sure the HPD signal is asserted high by device + * when we want to establish a link with it. + */ + ret = analogix_dp_detect_hpd(dp); + if (ret) { + DRM_ERROR("failed to get hpd single ret = %d\n", ret); + goto out_dp_init; + } + + ret = analogix_dp_commit(dp); + if (ret) { + DRM_ERROR("dp commit error, ret = %d\n", ret); + goto out_dp_init; + } + + if (dp->plat_data->power_on_end) + dp->plat_data->power_on_end(dp->plat_data); + + enable_irq(dp->irq); + return 0; + +out_dp_init: + phy_power_off(dp->phy); + if (dp->plat_data->power_off) + dp->plat_data->power_off(dp->plat_data); + clk_disable_unprepare(dp->clock); +out_dp_clk_pre: + pm_runtime_put_sync(dp->dev); + + return ret; +} + +static void +analogix_dp_bridge_atomic_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct drm_atomic_state *old_state = old_bridge_state->base.state; + struct analogix_dp_device *dp = bridge->driver_private; + struct drm_crtc *crtc; + struct drm_crtc_state *old_crtc_state; + int timeout_loop = 0; + int ret; + + crtc = analogix_dp_get_new_crtc(dp, old_state); + if (!crtc) + return; + + old_crtc_state = drm_atomic_get_old_crtc_state(old_state, crtc); + /* Not a full enable, just disable PSR and continue */ + if (old_crtc_state && old_crtc_state->self_refresh_active) { + ret = analogix_dp_disable_psr(dp); + if (ret) + DRM_ERROR("Failed to disable psr %d\n", ret); + return; + } + + if (dp->dpms_mode == DRM_MODE_DPMS_ON) + return; + + while (timeout_loop < MAX_PLL_LOCK_LOOP) { + if (analogix_dp_set_bridge(dp) == 0) { + dp->dpms_mode = DRM_MODE_DPMS_ON; + return; + } + dev_err(dp->dev, "failed to set bridge, retry: %d\n", + timeout_loop); + timeout_loop++; + usleep_range(10, 11); + } + dev_err(dp->dev, "too many times retry set bridge, give it up\n"); +} + +static void analogix_dp_bridge_disable(struct drm_bridge *bridge) +{ + struct analogix_dp_device *dp = bridge->driver_private; + int ret; + + if (dp->dpms_mode != DRM_MODE_DPMS_ON) + return; + + if (dp->plat_data->panel) { + if (drm_panel_disable(dp->plat_data->panel)) { + DRM_ERROR("failed to disable the panel\n"); + return; + } + } + + disable_irq(dp->irq); + + if (dp->plat_data->power_off) + dp->plat_data->power_off(dp->plat_data); + + analogix_dp_set_analog_power_down(dp, POWER_ALL, 1); + phy_power_off(dp->phy); + + clk_disable_unprepare(dp->clock); + + pm_runtime_put_sync(dp->dev); + + ret = analogix_dp_prepare_panel(dp, false, true); + if (ret) + DRM_ERROR("failed to setup the panel ret = %d\n", ret); + + dp->fast_train_enable = false; + dp->psr_supported = false; + dp->dpms_mode = DRM_MODE_DPMS_OFF; +} + +static void +analogix_dp_bridge_atomic_disable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct drm_atomic_state *old_state = old_bridge_state->base.state; + struct analogix_dp_device *dp = bridge->driver_private; + struct drm_crtc *old_crtc, *new_crtc; + struct drm_crtc_state *old_crtc_state = NULL; + struct drm_crtc_state *new_crtc_state = NULL; + int ret; + + new_crtc = analogix_dp_get_new_crtc(dp, old_state); + if (!new_crtc) + goto out; + + new_crtc_state = drm_atomic_get_new_crtc_state(old_state, new_crtc); + if (!new_crtc_state) + goto out; + + /* Don't do a full disable on PSR transitions */ + if (new_crtc_state->self_refresh_active) + return; + +out: + old_crtc = analogix_dp_get_old_crtc(dp, old_state); + if (old_crtc) { + old_crtc_state = drm_atomic_get_old_crtc_state(old_state, + old_crtc); + + /* When moving from PSR to fully disabled, exit PSR first. */ + if (old_crtc_state && old_crtc_state->self_refresh_active) { + ret = analogix_dp_disable_psr(dp); + if (ret) + DRM_ERROR("Failed to disable psr (%d)\n", ret); + } + } + + analogix_dp_bridge_disable(bridge); +} + +static void +analogix_dp_bridge_atomic_post_disable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct drm_atomic_state *old_state = old_bridge_state->base.state; + struct analogix_dp_device *dp = bridge->driver_private; + struct drm_crtc *crtc; + struct drm_crtc_state *new_crtc_state; + int ret; + + crtc = analogix_dp_get_new_crtc(dp, old_state); + if (!crtc) + return; + + new_crtc_state = drm_atomic_get_new_crtc_state(old_state, crtc); + if (!new_crtc_state || !new_crtc_state->self_refresh_active) + return; + + ret = analogix_dp_enable_psr(dp); + if (ret) + DRM_ERROR("Failed to enable psr (%d)\n", ret); +} + +static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge, + const struct drm_display_mode *orig_mode, + const struct drm_display_mode *mode) +{ + struct analogix_dp_device *dp = bridge->driver_private; + struct drm_display_info *display_info = &dp->connector.display_info; + struct video_info *video = &dp->video_info; + struct device_node *dp_node = dp->dev->of_node; + int vic; + + /* Input video interlaces & hsync pol & vsync pol */ + video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); + video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC); + video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC); + + /* Input video dynamic_range & colorimetry */ + vic = drm_match_cea_mode(mode); + if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) || + (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) { + video->dynamic_range = CEA; + video->ycbcr_coeff = COLOR_YCBCR601; + } else if (vic) { + video->dynamic_range = CEA; + video->ycbcr_coeff = COLOR_YCBCR709; + } else { + video->dynamic_range = VESA; + video->ycbcr_coeff = COLOR_YCBCR709; + } + + /* Input vide bpc and color_formats */ + switch (display_info->bpc) { + case 12: + video->color_depth = COLOR_12; + break; + case 10: + video->color_depth = COLOR_10; + break; + case 8: + video->color_depth = COLOR_8; + break; + case 6: + video->color_depth = COLOR_6; + break; + default: + video->color_depth = COLOR_8; + break; + } + if (display_info->color_formats & DRM_COLOR_FORMAT_YCBCR444) + video->color_space = COLOR_YCBCR444; + else if (display_info->color_formats & DRM_COLOR_FORMAT_YCBCR422) + video->color_space = COLOR_YCBCR422; + else + video->color_space = COLOR_RGB; + + /* + * NOTE: those property parsing code is used for providing backward + * compatibility for samsung platform. + * Due to we used the "of_property_read_u32" interfaces, when this + * property isn't present, the "video_info" can keep the original + * values and wouldn't be modified. + */ + of_property_read_u32(dp_node, "samsung,color-space", + &video->color_space); + of_property_read_u32(dp_node, "samsung,dynamic-range", + &video->dynamic_range); + of_property_read_u32(dp_node, "samsung,ycbcr-coeff", + &video->ycbcr_coeff); + of_property_read_u32(dp_node, "samsung,color-depth", + &video->color_depth); + if (of_property_read_bool(dp_node, "hsync-active-high")) + video->h_sync_polarity = true; + if (of_property_read_bool(dp_node, "vsync-active-high")) + video->v_sync_polarity = true; + if (of_property_read_bool(dp_node, "interlaced")) + video->interlaced = true; +} + +static const struct drm_bridge_funcs analogix_dp_bridge_funcs = { + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, + .atomic_pre_enable = analogix_dp_bridge_atomic_pre_enable, + .atomic_enable = analogix_dp_bridge_atomic_enable, + .atomic_disable = analogix_dp_bridge_atomic_disable, + .atomic_post_disable = analogix_dp_bridge_atomic_post_disable, + .mode_set = analogix_dp_bridge_mode_set, + .attach = analogix_dp_bridge_attach, +}; + +static int analogix_dp_create_bridge(struct drm_device *drm_dev, + struct analogix_dp_device *dp) +{ + struct drm_bridge *bridge; + + bridge = devm_kzalloc(drm_dev->dev, sizeof(*bridge), GFP_KERNEL); + if (!bridge) { + DRM_ERROR("failed to allocate for drm bridge\n"); + return -ENOMEM; + } + + dp->bridge = bridge; + + bridge->driver_private = dp; + bridge->funcs = &analogix_dp_bridge_funcs; + + return drm_bridge_attach(dp->encoder, bridge, NULL, 0); +} + +static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp) +{ + struct device_node *dp_node = dp->dev->of_node; + struct video_info *video_info = &dp->video_info; + + switch (dp->plat_data->dev_type) { + case RK3288_DP: + case RK3399_EDP: + /* + * Like Rk3288 DisplayPort TRM indicate that "Main link + * containing 4 physical lanes of 2.7/1.62 Gbps/lane". + */ + video_info->max_link_rate = 0x0A; + video_info->max_lane_count = 0x04; + break; + case EXYNOS_DP: + /* + * NOTE: those property parseing code is used for + * providing backward compatibility for samsung platform. + */ + of_property_read_u32(dp_node, "samsung,link-rate", + &video_info->max_link_rate); + of_property_read_u32(dp_node, "samsung,lane-count", + &video_info->max_lane_count); + break; + } + + return 0; +} + +static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux, + struct drm_dp_aux_msg *msg) +{ + struct analogix_dp_device *dp = to_dp(aux); + int ret; + + pm_runtime_get_sync(dp->dev); + + ret = analogix_dp_detect_hpd(dp); + if (ret) + goto out; + + ret = analogix_dp_transfer(dp, msg); +out: + pm_runtime_mark_last_busy(dp->dev); + pm_runtime_put_autosuspend(dp->dev); + + return ret; +} + +struct analogix_dp_device * +analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct analogix_dp_device *dp; + struct resource *res; + unsigned int irq_flags; + int ret; + + if (!plat_data) { + dev_err(dev, "Invalided input plat_data\n"); + return ERR_PTR(-EINVAL); + } + + dp = devm_kzalloc(dev, sizeof(struct analogix_dp_device), GFP_KERNEL); + if (!dp) + return ERR_PTR(-ENOMEM); + + dp->dev = &pdev->dev; + dp->dpms_mode = DRM_MODE_DPMS_OFF; + + mutex_init(&dp->panel_lock); + dp->panel_is_modeset = false; + + /* + * platform dp driver need containor_of the plat_data to get + * the driver private data, so we need to store the point of + * plat_data, not the context of plat_data. + */ + dp->plat_data = plat_data; + + ret = analogix_dp_dt_parse_pdata(dp); + if (ret) + return ERR_PTR(ret); + + dp->phy = devm_phy_get(dp->dev, "dp"); + if (IS_ERR(dp->phy)) { + dev_err(dp->dev, "no DP phy configured\n"); + ret = PTR_ERR(dp->phy); + if (ret) { + /* + * phy itself is not enabled, so we can move forward + * assigning NULL to phy pointer. + */ + if (ret == -ENOSYS || ret == -ENODEV) + dp->phy = NULL; + else + return ERR_PTR(ret); + } + } + + dp->clock = devm_clk_get(&pdev->dev, "dp"); + if (IS_ERR(dp->clock)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return ERR_CAST(dp->clock); + } + + clk_prepare_enable(dp->clock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + dp->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dp->reg_base)) { + ret = PTR_ERR(dp->reg_base); + goto err_disable_clk; + } + + dp->force_hpd = of_property_read_bool(dev->of_node, "force-hpd"); + + /* Try two different names */ + dp->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN); + if (!dp->hpd_gpiod) + dp->hpd_gpiod = devm_gpiod_get_optional(dev, "samsung,hpd", + GPIOD_IN); + if (IS_ERR(dp->hpd_gpiod)) { + dev_err(dev, "error getting HDP GPIO: %ld\n", + PTR_ERR(dp->hpd_gpiod)); + ret = PTR_ERR(dp->hpd_gpiod); + goto err_disable_clk; + } + + if (dp->hpd_gpiod) { + /* + * Set up the hotplug GPIO from the device tree as an interrupt. + * Simply specifying a different interrupt in the device tree + * doesn't work since we handle hotplug rather differently when + * using a GPIO. We also need the actual GPIO specifier so + * that we can get the current state of the GPIO. + */ + dp->irq = gpiod_to_irq(dp->hpd_gpiod); + irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; + } else { + dp->irq = platform_get_irq(pdev, 0); + irq_flags = 0; + } + + if (dp->irq == -ENXIO) { + dev_err(&pdev->dev, "failed to get irq\n"); + ret = -ENODEV; + goto err_disable_clk; + } + + ret = devm_request_threaded_irq(&pdev->dev, dp->irq, + analogix_dp_hardirq, + analogix_dp_irq_thread, + irq_flags, "analogix-dp", dp); + if (ret) { + dev_err(&pdev->dev, "failed to request irq\n"); + goto err_disable_clk; + } + disable_irq(dp->irq); + + return dp; + +err_disable_clk: + clk_disable_unprepare(dp->clock); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(analogix_dp_probe); + +int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev) +{ + int ret; + + dp->drm_dev = drm_dev; + dp->encoder = dp->plat_data->encoder; + + dp->aux.name = "DP-AUX"; + dp->aux.transfer = analogix_dpaux_transfer; + dp->aux.dev = dp->dev; + dp->aux.drm_dev = drm_dev; + + ret = drm_dp_aux_register(&dp->aux); + if (ret) + return ret; + + pm_runtime_use_autosuspend(dp->dev); + pm_runtime_set_autosuspend_delay(dp->dev, 100); + pm_runtime_enable(dp->dev); + + ret = analogix_dp_create_bridge(drm_dev, dp); + if (ret) { + DRM_ERROR("failed to create bridge (%d)\n", ret); + goto err_disable_pm_runtime; + } + + return 0; + +err_disable_pm_runtime: + pm_runtime_dont_use_autosuspend(dp->dev); + pm_runtime_disable(dp->dev); + drm_dp_aux_unregister(&dp->aux); + + return ret; +} +EXPORT_SYMBOL_GPL(analogix_dp_bind); + +void analogix_dp_unbind(struct analogix_dp_device *dp) +{ + analogix_dp_bridge_disable(dp->bridge); + dp->connector.funcs->destroy(&dp->connector); + + if (dp->plat_data->panel) { + if (drm_panel_unprepare(dp->plat_data->panel)) + DRM_ERROR("failed to turnoff the panel\n"); + } + + drm_dp_aux_unregister(&dp->aux); + pm_runtime_dont_use_autosuspend(dp->dev); + pm_runtime_disable(dp->dev); +} +EXPORT_SYMBOL_GPL(analogix_dp_unbind); + +void analogix_dp_remove(struct analogix_dp_device *dp) +{ + clk_disable_unprepare(dp->clock); +} +EXPORT_SYMBOL_GPL(analogix_dp_remove); + +#ifdef CONFIG_PM +int analogix_dp_suspend(struct analogix_dp_device *dp) +{ + clk_disable_unprepare(dp->clock); + return 0; +} +EXPORT_SYMBOL_GPL(analogix_dp_suspend); + +int analogix_dp_resume(struct analogix_dp_device *dp) +{ + int ret; + + ret = clk_prepare_enable(dp->clock); + if (ret < 0) { + DRM_ERROR("Failed to prepare_enable the clock clk [%d]\n", ret); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(analogix_dp_resume); +#endif + +int analogix_dp_start_crc(struct drm_connector *connector) +{ + struct analogix_dp_device *dp = to_dp(connector); + + if (!connector->state->crtc) { + DRM_ERROR("Connector %s doesn't currently have a CRTC.\n", + connector->name); + return -EINVAL; + } + + return drm_dp_start_crc(&dp->aux, connector->state->crtc); +} +EXPORT_SYMBOL_GPL(analogix_dp_start_crc); + +int analogix_dp_stop_crc(struct drm_connector *connector) +{ + struct analogix_dp_device *dp = to_dp(connector); + + return drm_dp_stop_crc(&dp->aux); +} +EXPORT_SYMBOL_GPL(analogix_dp_stop_crc); + +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); +MODULE_DESCRIPTION("Analogix DP Core Driver"); +MODULE_LICENSE("GPL v2"); |