Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 1079 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_abi.h
new file mode 100644
index 0000000000..f359bef046
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_abi.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_ACTIONS_ABI_H
+#define _ABI_GUC_ACTIONS_ABI_H
+
+/**
+ * DOC: HOST2GUC_SELF_CFG
+ *
+ * This message is used by Host KMD to setup of the `GuC Self Config KLVs`_.
+ *
+ * This message must be sent as `MMIO HXG Message`_.
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN = GUC_HXG_ORIGIN_HOST_                                |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_                                 |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 27:16 | DATA0 = MBZ                                                  |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | ACTION = _`GUC_ACTION_HOST2GUC_SELF_CFG` = 0x0508            |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 | 31:16 | **KLV_KEY** - KLV key, see `GuC Self Config KLVs`_           |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | **KLV_LEN** - KLV length                                     |
+ *  |   |       |                                                              |
+ *  |   |       |   - 32 bit KLV = 1                                           |
+ *  |   |       |   - 64 bit KLV = 2                                           |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 2 |  31:0 | **VALUE32** - Bits 31-0 of the KLV value                     |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 3 |  31:0 | **VALUE64** - Bits 63-32 of the KLV value (**KLV_LEN** = 2)  |
+ *  +---+-------+--------------------------------------------------------------+
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN = GUC_HXG_ORIGIN_GUC_                                 |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_                        |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  27:0 | DATA0 = **NUM** - 1 if KLV was parsed, 0 if not recognized   |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+#define GUC_ACTION_HOST2GUC_SELF_CFG			0x0508
+
+#define HOST2GUC_SELF_CFG_REQUEST_MSG_LEN		(GUC_HXG_REQUEST_MSG_MIN_LEN + 3u)
+#define HOST2GUC_SELF_CFG_REQUEST_MSG_0_MBZ		GUC_HXG_REQUEST_MSG_0_DATA0
+#define HOST2GUC_SELF_CFG_REQUEST_MSG_1_KLV_KEY		(0xffffU << 16)
+#define HOST2GUC_SELF_CFG_REQUEST_MSG_1_KLV_LEN		(0xffff << 0)
+#define HOST2GUC_SELF_CFG_REQUEST_MSG_2_VALUE32		GUC_HXG_REQUEST_MSG_n_DATAn
+#define HOST2GUC_SELF_CFG_REQUEST_MSG_3_VALUE64		GUC_HXG_REQUEST_MSG_n_DATAn
+
+#define HOST2GUC_SELF_CFG_RESPONSE_MSG_LEN		GUC_HXG_RESPONSE_MSG_MIN_LEN
+#define HOST2GUC_SELF_CFG_RESPONSE_MSG_0_NUM		GUC_HXG_RESPONSE_MSG_0_DATA0
+
+/**
+ * DOC: HOST2GUC_CONTROL_CTB
+ *
+ * This H2G action allows Vf Host to enable or disable H2G and G2H `CT Buffer`_.
+ *
+ * This message must be sent as `MMIO HXG Message`_.
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN = GUC_HXG_ORIGIN_HOST_                                |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_                                 |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 27:16 | DATA0 = MBZ                                                  |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | ACTION = _`GUC_ACTION_HOST2GUC_CONTROL_CTB` = 0x4509         |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 | **CONTROL** - control `CTB based communication`_             |
+ *  |   |       |                                                              |
+ *  |   |       |   - _`GUC_CTB_CONTROL_DISABLE` = 0                           |
+ *  |   |       |   - _`GUC_CTB_CONTROL_ENABLE` = 1                            |
+ *  +---+-------+--------------------------------------------------------------+
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN = GUC_HXG_ORIGIN_GUC_                                 |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_                        |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  27:0 | DATA0 = MBZ                                                  |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+#define GUC_ACTION_HOST2GUC_CONTROL_CTB			0x4509
+
+#define HOST2GUC_CONTROL_CTB_REQUEST_MSG_LEN		(GUC_HXG_REQUEST_MSG_MIN_LEN + 1u)
+#define HOST2GUC_CONTROL_CTB_REQUEST_MSG_0_MBZ		GUC_HXG_REQUEST_MSG_0_DATA0
+#define HOST2GUC_CONTROL_CTB_REQUEST_MSG_1_CONTROL	GUC_HXG_REQUEST_MSG_n_DATAn
+#define   GUC_CTB_CONTROL_DISABLE			0u
+#define   GUC_CTB_CONTROL_ENABLE			1u
+
+#define HOST2GUC_CONTROL_CTB_RESPONSE_MSG_LEN		GUC_HXG_RESPONSE_MSG_MIN_LEN
+#define HOST2GUC_CONTROL_CTB_RESPONSE_MSG_0_MBZ		GUC_HXG_RESPONSE_MSG_0_DATA0
+
+/* legacy definitions */
+
+enum intel_guc_action {
+	INTEL_GUC_ACTION_DEFAULT = 0x0,
+	INTEL_GUC_ACTION_REQUEST_PREEMPTION = 0x2,
+	INTEL_GUC_ACTION_REQUEST_ENGINE_RESET = 0x3,
+	INTEL_GUC_ACTION_ALLOCATE_DOORBELL = 0x10,
+	INTEL_GUC_ACTION_DEALLOCATE_DOORBELL = 0x20,
+	INTEL_GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30,
+	INTEL_GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x40,
+	INTEL_GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302,
+	INTEL_GUC_ACTION_ENTER_S_STATE = 0x501,
+	INTEL_GUC_ACTION_EXIT_S_STATE = 0x502,
+	INTEL_GUC_ACTION_GLOBAL_SCHED_POLICY_CHANGE = 0x506,
+	INTEL_GUC_ACTION_UPDATE_SCHEDULING_POLICIES_KLV = 0x509,
+	INTEL_GUC_ACTION_SCHED_CONTEXT = 0x1000,
+	INTEL_GUC_ACTION_SCHED_CONTEXT_MODE_SET = 0x1001,
+	INTEL_GUC_ACTION_SCHED_CONTEXT_MODE_DONE = 0x1002,
+	INTEL_GUC_ACTION_SCHED_ENGINE_MODE_SET = 0x1003,
+	INTEL_GUC_ACTION_SCHED_ENGINE_MODE_DONE = 0x1004,
+	INTEL_GUC_ACTION_V69_SET_CONTEXT_PRIORITY = 0x1005,
+	INTEL_GUC_ACTION_V69_SET_CONTEXT_EXECUTION_QUANTUM = 0x1006,
+	INTEL_GUC_ACTION_V69_SET_CONTEXT_PREEMPTION_TIMEOUT = 0x1007,
+	INTEL_GUC_ACTION_CONTEXT_RESET_NOTIFICATION = 0x1008,
+	INTEL_GUC_ACTION_ENGINE_FAILURE_NOTIFICATION = 0x1009,
+	INTEL_GUC_ACTION_HOST2GUC_UPDATE_CONTEXT_POLICIES = 0x100B,
+	INTEL_GUC_ACTION_SETUP_PC_GUCRC = 0x3004,
+	INTEL_GUC_ACTION_AUTHENTICATE_HUC = 0x4000,
+	INTEL_GUC_ACTION_GET_HWCONFIG = 0x4100,
+	INTEL_GUC_ACTION_REGISTER_CONTEXT = 0x4502,
+	INTEL_GUC_ACTION_DEREGISTER_CONTEXT = 0x4503,
+	INTEL_GUC_ACTION_DEREGISTER_CONTEXT_DONE = 0x4600,
+	INTEL_GUC_ACTION_REGISTER_CONTEXT_MULTI_LRC = 0x4601,
+	INTEL_GUC_ACTION_CLIENT_SOFT_RESET = 0x5507,
+	INTEL_GUC_ACTION_SET_ENG_UTIL_BUFF = 0x550A,
+	INTEL_GUC_ACTION_STATE_CAPTURE_NOTIFICATION = 0x8002,
+	INTEL_GUC_ACTION_NOTIFY_FLUSH_LOG_BUFFER_TO_FILE = 0x8003,
+	INTEL_GUC_ACTION_NOTIFY_CRASH_DUMP_POSTED = 0x8004,
+	INTEL_GUC_ACTION_NOTIFY_EXCEPTION = 0x8005,
+	INTEL_GUC_ACTION_LIMIT
+};
+
+enum intel_guc_rc_options {
+	INTEL_GUCRC_HOST_CONTROL,
+	INTEL_GUCRC_FIRMWARE_CONTROL,
+};
+
+enum intel_guc_preempt_options {
+	INTEL_GUC_PREEMPT_OPTION_DROP_WORK_Q = 0x4,
+	INTEL_GUC_PREEMPT_OPTION_DROP_SUBMIT_Q = 0x8,
+};
+
+enum intel_guc_report_status {
+	INTEL_GUC_REPORT_STATUS_UNKNOWN = 0x0,
+	INTEL_GUC_REPORT_STATUS_ACKED = 0x1,
+	INTEL_GUC_REPORT_STATUS_ERROR = 0x2,
+	INTEL_GUC_REPORT_STATUS_COMPLETE = 0x4,
+};
+
+enum intel_guc_sleep_state_status {
+	INTEL_GUC_SLEEP_STATE_SUCCESS = 0x1,
+	INTEL_GUC_SLEEP_STATE_PREEMPT_TO_IDLE_FAILED = 0x2,
+	INTEL_GUC_SLEEP_STATE_ENGINE_RESET_FAILED = 0x3
+#define INTEL_GUC_SLEEP_STATE_INVALID_MASK 0x80000000
+};
+
+#define GUC_LOG_CONTROL_LOGGING_ENABLED	(1 << 0)
+#define GUC_LOG_CONTROL_VERBOSITY_SHIFT	4
+#define GUC_LOG_CONTROL_VERBOSITY_MASK	(0xF << GUC_LOG_CONTROL_VERBOSITY_SHIFT)
+#define GUC_LOG_CONTROL_DEFAULT_LOGGING	(1 << 8)
+
+enum intel_guc_state_capture_event_status {
+	INTEL_GUC_STATE_CAPTURE_EVENT_STATUS_SUCCESS = 0x0,
+	INTEL_GUC_STATE_CAPTURE_EVENT_STATUS_NOSPACE = 0x1,
+};
+
+#define INTEL_GUC_STATE_CAPTURE_EVENT_STATUS_MASK      0x000000FF
+
+#endif /* _ABI_GUC_ACTIONS_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_slpc_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_slpc_abi.h
new file mode 100644
index 0000000000..811add10c3
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_slpc_abi.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2021 Intel Corporation
+ */
+
+#ifndef _GUC_ACTIONS_SLPC_ABI_H_
+#define _GUC_ACTIONS_SLPC_ABI_H_
+
+#include <linux/types.h>
+
+/**
+ * DOC: SLPC SHARED DATA STRUCTURE
+ *
+ *  +----+------+--------------------------------------------------------------+
+ *  | CL | Bytes| Description                                                  |
+ *  +====+======+==============================================================+
+ *  | 1  | 0-3  | SHARED DATA SIZE                                             |
+ *  |    +------+--------------------------------------------------------------+
+ *  |    | 4-7  | GLOBAL STATE                                                 |
+ *  |    +------+--------------------------------------------------------------+
+ *  |    | 8-11 | DISPLAY DATA ADDRESS                                         |
+ *  |    +------+--------------------------------------------------------------+
+ *  |    | 12:63| PADDING                                                      |
+ *  +----+------+--------------------------------------------------------------+
+ *  |    | 0:63 | PADDING(PLATFORM INFO)                                       |
+ *  +----+------+--------------------------------------------------------------+
+ *  | 3  | 0-3  | TASK STATE DATA                                              |
+ *  +    +------+--------------------------------------------------------------+
+ *  |    | 4:63 | PADDING                                                      |
+ *  +----+------+--------------------------------------------------------------+
+ *  |4-21|0:1087| OVERRIDE PARAMS AND BIT FIELDS                               |
+ *  +----+------+--------------------------------------------------------------+
+ *  |    |      | PADDING + EXTRA RESERVED PAGE                                |
+ *  +----+------+--------------------------------------------------------------+
+ */
+
+/*
+ * SLPC exposes certain parameters for global configuration by the host.
+ * These are referred to as override parameters, because in most cases
+ * the host will not need to modify the default values used by SLPC.
+ * SLPC remembers the default values which allows the host to easily restore
+ * them by simply unsetting the override. The host can set or unset override
+ * parameters during SLPC (re-)initialization using the SLPC Reset event.
+ * The host can also set or unset override parameters on the fly using the
+ * Parameter Set and Parameter Unset events
+ */
+
+#define SLPC_MAX_OVERRIDE_PARAMETERS		256
+#define SLPC_OVERRIDE_BITFIELD_SIZE \
+		(SLPC_MAX_OVERRIDE_PARAMETERS / 32)
+
+#define SLPC_PAGE_SIZE_BYTES			4096
+#define SLPC_CACHELINE_SIZE_BYTES		64
+#define SLPC_SHARED_DATA_SIZE_BYTE_HEADER	SLPC_CACHELINE_SIZE_BYTES
+#define SLPC_SHARED_DATA_SIZE_BYTE_PLATFORM_INFO	SLPC_CACHELINE_SIZE_BYTES
+#define SLPC_SHARED_DATA_SIZE_BYTE_TASK_STATE	SLPC_CACHELINE_SIZE_BYTES
+#define SLPC_SHARED_DATA_MODE_DEFN_TABLE_SIZE	SLPC_PAGE_SIZE_BYTES
+#define SLPC_SHARED_DATA_SIZE_BYTE_MAX		(2 * SLPC_PAGE_SIZE_BYTES)
+
+/*
+ * Cacheline size aligned (Total size needed for
+ * SLPM_KMD_MAX_OVERRIDE_PARAMETERS=256 is 1088 bytes)
+ */
+#define SLPC_OVERRIDE_PARAMS_TOTAL_BYTES	(((((SLPC_MAX_OVERRIDE_PARAMETERS * 4) \
+						+ ((SLPC_MAX_OVERRIDE_PARAMETERS / 32) * 4)) \
+		+ (SLPC_CACHELINE_SIZE_BYTES - 1)) / SLPC_CACHELINE_SIZE_BYTES) * \
+					SLPC_CACHELINE_SIZE_BYTES)
+
+#define SLPC_SHARED_DATA_SIZE_BYTE_OTHER	(SLPC_SHARED_DATA_SIZE_BYTE_MAX - \
+					(SLPC_SHARED_DATA_SIZE_BYTE_HEADER \
+					+ SLPC_SHARED_DATA_SIZE_BYTE_PLATFORM_INFO \
+					+ SLPC_SHARED_DATA_SIZE_BYTE_TASK_STATE \
+					+ SLPC_OVERRIDE_PARAMS_TOTAL_BYTES \
+					+ SLPC_SHARED_DATA_MODE_DEFN_TABLE_SIZE))
+
+enum slpc_task_enable {
+	SLPC_PARAM_TASK_DEFAULT = 0,
+	SLPC_PARAM_TASK_ENABLED,
+	SLPC_PARAM_TASK_DISABLED,
+	SLPC_PARAM_TASK_UNKNOWN
+};
+
+enum slpc_global_state {
+	SLPC_GLOBAL_STATE_NOT_RUNNING = 0,
+	SLPC_GLOBAL_STATE_INITIALIZING = 1,
+	SLPC_GLOBAL_STATE_RESETTING = 2,
+	SLPC_GLOBAL_STATE_RUNNING = 3,
+	SLPC_GLOBAL_STATE_SHUTTING_DOWN = 4,
+	SLPC_GLOBAL_STATE_ERROR = 5
+};
+
+enum slpc_param_id {
+	SLPC_PARAM_TASK_ENABLE_GTPERF = 0,
+	SLPC_PARAM_TASK_DISABLE_GTPERF = 1,
+	SLPC_PARAM_TASK_ENABLE_BALANCER = 2,
+	SLPC_PARAM_TASK_DISABLE_BALANCER = 3,
+	SLPC_PARAM_TASK_ENABLE_DCC = 4,
+	SLPC_PARAM_TASK_DISABLE_DCC = 5,
+	SLPC_PARAM_GLOBAL_MIN_GT_UNSLICE_FREQ_MHZ = 6,
+	SLPC_PARAM_GLOBAL_MAX_GT_UNSLICE_FREQ_MHZ = 7,
+	SLPC_PARAM_GLOBAL_MIN_GT_SLICE_FREQ_MHZ = 8,
+	SLPC_PARAM_GLOBAL_MAX_GT_SLICE_FREQ_MHZ = 9,
+	SLPC_PARAM_GTPERF_THRESHOLD_MAX_FPS = 10,
+	SLPC_PARAM_GLOBAL_DISABLE_GT_FREQ_MANAGEMENT = 11,
+	SLPC_PARAM_GTPERF_ENABLE_FRAMERATE_STALLING = 12,
+	SLPC_PARAM_GLOBAL_DISABLE_RC6_MODE_CHANGE = 13,
+	SLPC_PARAM_GLOBAL_OC_UNSLICE_FREQ_MHZ = 14,
+	SLPC_PARAM_GLOBAL_OC_SLICE_FREQ_MHZ = 15,
+	SLPC_PARAM_GLOBAL_ENABLE_IA_GT_BALANCING = 16,
+	SLPC_PARAM_GLOBAL_ENABLE_ADAPTIVE_BURST_TURBO = 17,
+	SLPC_PARAM_GLOBAL_ENABLE_EVAL_MODE = 18,
+	SLPC_PARAM_GLOBAL_ENABLE_BALANCER_IN_NON_GAMING_MODE = 19,
+	SLPC_PARAM_GLOBAL_RT_MODE_TURBO_FREQ_DELTA_MHZ = 20,
+	SLPC_PARAM_PWRGATE_RC_MODE = 21,
+	SLPC_PARAM_EDR_MODE_COMPUTE_TIMEOUT_MS = 22,
+	SLPC_PARAM_EDR_QOS_FREQ_MHZ = 23,
+	SLPC_PARAM_MEDIA_FF_RATIO_MODE = 24,
+	SLPC_PARAM_ENABLE_IA_FREQ_LIMITING = 25,
+	SLPC_PARAM_STRATEGIES = 26,
+	SLPC_PARAM_POWER_PROFILE = 27,
+	SLPC_PARAM_IGNORE_EFFICIENT_FREQUENCY = 28,
+	SLPC_MAX_PARAM = 32,
+};
+
+enum slpc_media_ratio_mode {
+	SLPC_MEDIA_RATIO_MODE_DYNAMIC_CONTROL = 0,
+	SLPC_MEDIA_RATIO_MODE_FIXED_ONE_TO_ONE = 1,
+	SLPC_MEDIA_RATIO_MODE_FIXED_ONE_TO_TWO = 2,
+};
+
+enum slpc_gucrc_mode {
+	SLPC_GUCRC_MODE_HW = 0,
+	SLPC_GUCRC_MODE_GUCRC_NO_RC6 = 1,
+	SLPC_GUCRC_MODE_GUCRC_STATIC_TIMEOUT = 2,
+	SLPC_GUCRC_MODE_GUCRC_DYNAMIC_HYSTERESIS = 3,
+
+	SLPC_GUCRC_MODE_MAX,
+};
+
+enum slpc_event_id {
+	SLPC_EVENT_RESET = 0,
+	SLPC_EVENT_SHUTDOWN = 1,
+	SLPC_EVENT_PLATFORM_INFO_CHANGE = 2,
+	SLPC_EVENT_DISPLAY_MODE_CHANGE = 3,
+	SLPC_EVENT_FLIP_COMPLETE = 4,
+	SLPC_EVENT_QUERY_TASK_STATE = 5,
+	SLPC_EVENT_PARAMETER_SET = 6,
+	SLPC_EVENT_PARAMETER_UNSET = 7,
+};
+
+struct slpc_task_state_data {
+	union {
+		u32 task_status_padding;
+		struct {
+			u32 status;
+#define SLPC_GTPERF_TASK_ENABLED	REG_BIT(0)
+#define SLPC_DCC_TASK_ENABLED		REG_BIT(11)
+#define SLPC_IN_DCC			REG_BIT(12)
+#define SLPC_BALANCER_ENABLED		REG_BIT(15)
+#define SLPC_IBC_TASK_ENABLED		REG_BIT(16)
+#define SLPC_BALANCER_IA_LMT_ENABLED	REG_BIT(17)
+#define SLPC_BALANCER_IA_LMT_ACTIVE	REG_BIT(18)
+		};
+	};
+	union {
+		u32 freq_padding;
+		struct {
+#define SLPC_MAX_UNSLICE_FREQ_MASK	REG_GENMASK(7, 0)
+#define SLPC_MIN_UNSLICE_FREQ_MASK	REG_GENMASK(15, 8)
+#define SLPC_MAX_SLICE_FREQ_MASK	REG_GENMASK(23, 16)
+#define SLPC_MIN_SLICE_FREQ_MASK	REG_GENMASK(31, 24)
+			u32 freq;
+		};
+	};
+} __packed;
+
+struct slpc_shared_data_header {
+	/* Total size in bytes of this shared buffer. */
+	u32 size;
+	u32 global_state;
+	u32 display_data_addr;
+} __packed;
+
+struct slpc_override_params {
+	u32 bits[SLPC_OVERRIDE_BITFIELD_SIZE];
+	u32 values[SLPC_MAX_OVERRIDE_PARAMETERS];
+} __packed;
+
+struct slpc_shared_data {
+	struct slpc_shared_data_header header;
+	u8 shared_data_header_pad[SLPC_SHARED_DATA_SIZE_BYTE_HEADER -
+				sizeof(struct slpc_shared_data_header)];
+
+	u8 platform_info_pad[SLPC_SHARED_DATA_SIZE_BYTE_PLATFORM_INFO];
+
+	struct slpc_task_state_data task_state_data;
+	u8 task_state_data_pad[SLPC_SHARED_DATA_SIZE_BYTE_TASK_STATE -
+				sizeof(struct slpc_task_state_data)];
+
+	struct slpc_override_params override_params;
+	u8 override_params_pad[SLPC_OVERRIDE_PARAMS_TOTAL_BYTES -
+				sizeof(struct slpc_override_params)];
+
+	u8 shared_data_pad[SLPC_SHARED_DATA_SIZE_BYTE_OTHER];
+
+	/* PAGE 2 (4096 bytes), mode based parameter will be removed soon */
+	u8 reserved_mode_definition[4096];
+} __packed;
+
+/**
+ * DOC: SLPC H2G MESSAGE FORMAT
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN = GUC_HXG_ORIGIN_HOST_                                |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_                                 |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 27:16 | DATA0 = MBZ                                                  |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | ACTION = _`GUC_ACTION_HOST2GUC_PC_SLPM_REQUEST` = 0x3003     |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:8 | **EVENT_ID**                                                 |
+ *  +   +-------+--------------------------------------------------------------+
+ *  |   |   7:0 | **EVENT_ARGC** - number of data arguments                    |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 2 |  31:0 | **EVENT_DATA1**                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ *  |...|  31:0 | ...                                                          |
+ *  +---+-------+--------------------------------------------------------------+
+ *  |2+n|  31:0 | **EVENT_DATAn**                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_ACTION_HOST2GUC_PC_SLPC_REQUEST		0x3003
+
+#define HOST2GUC_PC_SLPC_REQUEST_MSG_MIN_LEN \
+				(GUC_HXG_REQUEST_MSG_MIN_LEN + 1u)
+#define HOST2GUC_PC_SLPC_EVENT_MAX_INPUT_ARGS		9
+#define HOST2GUC_PC_SLPC_REQUEST_MSG_MAX_LEN \
+		(HOST2GUC_PC_SLPC_REQUEST_REQUEST_MSG_MIN_LEN + \
+			HOST2GUC_PC_SLPC_EVENT_MAX_INPUT_ARGS)
+#define HOST2GUC_PC_SLPC_REQUEST_MSG_0_MBZ		GUC_HXG_REQUEST_MSG_0_DATA0
+#define HOST2GUC_PC_SLPC_REQUEST_MSG_1_EVENT_ID		(0xff << 8)
+#define HOST2GUC_PC_SLPC_REQUEST_MSG_1_EVENT_ARGC	(0xff << 0)
+#define HOST2GUC_PC_SLPC_REQUEST_MSG_N_EVENT_DATA_N	GUC_HXG_REQUEST_MSG_n_DATAn
+
+#endif
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h
new file mode 100644
index 0000000000..f7d70db16d
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h
@@ -0,0 +1,170 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_COMMUNICATION_CTB_ABI_H
+#define _ABI_GUC_COMMUNICATION_CTB_ABI_H
+
+#include <linux/types.h>
+#include <linux/build_bug.h>
+
+#include "guc_messages_abi.h"
+
+/**
+ * DOC: CT Buffer
+ *
+ * Circular buffer used to send `CTB Message`_
+ */
+
+/**
+ * DOC: CTB Descriptor
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |  31:0 | **HEAD** - offset (in dwords) to the last dword that was     |
+ *  |   |       | read from the `CT Buffer`_.                                  |
+ *  |   |       | It can only be updated by the receiver.                      |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 | **TAIL** - offset (in dwords) to the last dword that was     |
+ *  |   |       | written to the `CT Buffer`_.                                 |
+ *  |   |       | It can only be updated by the sender.                        |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 2 |  31:0 | **STATUS** - status of the CTB                               |
+ *  |   |       |                                                              |
+ *  |   |       |   - _`GUC_CTB_STATUS_NO_ERROR` = 0 (normal operation)        |
+ *  |   |       |   - _`GUC_CTB_STATUS_OVERFLOW` = 1 (head/tail too large)     |
+ *  |   |       |   - _`GUC_CTB_STATUS_UNDERFLOW` = 2 (truncated message)      |
+ *  |   |       |   - _`GUC_CTB_STATUS_MISMATCH` = 4 (head/tail modified)      |
+ *  |   |       |   - _`GUC_CTB_STATUS_UNUSED` = 8 (CTB is not in use)         |
+ *  +---+-------+--------------------------------------------------------------+
+ *  |...|       | RESERVED = MBZ                                               |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 15|  31:0 | RESERVED = MBZ                                               |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+struct guc_ct_buffer_desc {
+	u32 head;
+	u32 tail;
+	u32 status;
+#define GUC_CTB_STATUS_NO_ERROR				0
+#define GUC_CTB_STATUS_OVERFLOW				BIT(0)
+#define GUC_CTB_STATUS_UNDERFLOW			BIT(1)
+#define GUC_CTB_STATUS_MISMATCH				BIT(2)
+#define GUC_CTB_STATUS_UNUSED				BIT(3)
+	u32 reserved[13];
+} __packed;
+static_assert(sizeof(struct guc_ct_buffer_desc) == 64);
+
+/**
+ * DOC: CTB Message
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 | 31:16 | **FENCE** - message identifier                               |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 15:12 | **FORMAT** - format of the CTB message                       |
+ *  |   |       |  - _`GUC_CTB_FORMAT_HXG` = 0 - see `CTB HXG Message`_        |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  11:8 | **RESERVED**                                                 |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |   7:0 | **NUM_DWORDS** - length of the CTB message (w/o header)      |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 | optional (depends on FORMAT)                                 |
+ *  +---+-------+                                                              |
+ *  |...|       |                                                              |
+ *  +---+-------+                                                              |
+ *  | n |  31:0 |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_CTB_HDR_LEN				1u
+#define GUC_CTB_MSG_MIN_LEN			GUC_CTB_HDR_LEN
+#define GUC_CTB_MSG_MAX_LEN			256u
+#define GUC_CTB_MSG_0_FENCE			(0xffffU << 16)
+#define GUC_CTB_MSG_0_FORMAT			(0xf << 12)
+#define   GUC_CTB_FORMAT_HXG			0u
+#define GUC_CTB_MSG_0_RESERVED			(0xf << 8)
+#define GUC_CTB_MSG_0_NUM_DWORDS		(0xff << 0)
+
+/**
+ * DOC: CTB HXG Message
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 | 31:16 | FENCE                                                        |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 15:12 | FORMAT = GUC_CTB_FORMAT_HXG_                                 |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  11:8 | RESERVED = MBZ                                               |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |   7:0 | NUM_DWORDS = length (in dwords) of the embedded HXG message  |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 |                                                              |
+ *  +---+-------+                                                              |
+ *  |...|       | [Embedded `HXG Message`_]                                    |
+ *  +---+-------+                                                              |
+ *  | n |  31:0 |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_CTB_HXG_MSG_MIN_LEN		(GUC_CTB_MSG_MIN_LEN + GUC_HXG_MSG_MIN_LEN)
+#define GUC_CTB_HXG_MSG_MAX_LEN		GUC_CTB_MSG_MAX_LEN
+
+/**
+ * DOC: CTB based communication
+ *
+ * The CTB (command transport buffer) communication between Host and GuC
+ * is based on u32 data stream written to the shared buffer. One buffer can
+ * be used to transmit data only in one direction (one-directional channel).
+ *
+ * Current status of the each buffer is stored in the buffer descriptor.
+ * Buffer descriptor holds tail and head fields that represents active data
+ * stream. The tail field is updated by the data producer (sender), and head
+ * field is updated by the data consumer (receiver)::
+ *
+ *      +------------+
+ *      | DESCRIPTOR |          +=================+============+========+
+ *      +============+          |                 | MESSAGE(s) |        |
+ *      | address    |--------->+=================+============+========+
+ *      +------------+
+ *      | head       |          ^-----head--------^
+ *      +------------+
+ *      | tail       |          ^---------tail-----------------^
+ *      +------------+
+ *      | size       |          ^---------------size--------------------^
+ *      +------------+
+ *
+ * Each message in data stream starts with the single u32 treated as a header,
+ * followed by optional set of u32 data that makes message specific payload::
+ *
+ *      +------------+---------+---------+---------+
+ *      |         MESSAGE                          |
+ *      +------------+---------+---------+---------+
+ *      |   msg[0]   |   [1]   |   ...   |  [n-1]  |
+ *      +------------+---------+---------+---------+
+ *      |   MESSAGE  |       MESSAGE PAYLOAD       |
+ *      +   HEADER   +---------+---------+---------+
+ *      |            |    0    |   ...   |    n    |
+ *      +======+=====+=========+=========+=========+
+ *      | 31:16| code|         |         |         |
+ *      +------+-----+         |         |         |
+ *      |  15:5|flags|         |         |         |
+ *      +------+-----+         |         |         |
+ *      |   4:0|  len|         |         |         |
+ *      +------+-----+---------+---------+---------+
+ *
+ *                   ^-------------len-------------^
+ *
+ * The message header consists of:
+ *
+ * - **len**, indicates length of the message payload (in u32)
+ * - **code**, indicates message code
+ * - **flags**, holds various bits to control message handling
+ */
+
+#endif /* _ABI_GUC_COMMUNICATION_CTB_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h
new file mode 100644
index 0000000000..9baa3cb07d
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_COMMUNICATION_MMIO_ABI_H
+#define _ABI_GUC_COMMUNICATION_MMIO_ABI_H
+
+/**
+ * DOC: GuC MMIO based communication
+ *
+ * The MMIO based communication between Host and GuC relies on special
+ * hardware registers which format could be defined by the software
+ * (so called scratch registers).
+ *
+ * Each MMIO based message, both Host to GuC (H2G) and GuC to Host (G2H)
+ * messages, which maximum length depends on number of available scratch
+ * registers, is directly written into those scratch registers.
+ *
+ * For Gen9+, there are 16 software scratch registers 0xC180-0xC1B8,
+ * but no H2G command takes more than 4 parameters and the GuC firmware
+ * itself uses an 4-element array to store the H2G message.
+ *
+ * For Gen11+, there are additional 4 registers 0x190240-0x19024C, which
+ * are, regardless on lower count, preferred over legacy ones.
+ *
+ * The MMIO based communication is mainly used during driver initialization
+ * phase to setup the `CTB based communication`_ that will be used afterwards.
+ */
+
+#define GUC_MAX_MMIO_MSG_LEN		4
+
+/**
+ * DOC: MMIO HXG Message
+ *
+ * Format of the MMIO messages follows definitions of `HXG Message`_.
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |  31:0 |                                                              |
+ *  +---+-------+                                                              |
+ *  |...|       | [Embedded `HXG Message`_]                                    |
+ *  +---+-------+                                                              |
+ *  | n |  31:0 |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#endif /* _ABI_GUC_COMMUNICATION_MMIO_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_errors_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_errors_abi.h
new file mode 100644
index 0000000000..dabeaf4f24
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_errors_abi.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_ERRORS_ABI_H
+#define _ABI_GUC_ERRORS_ABI_H
+
+enum intel_guc_response_status {
+	INTEL_GUC_RESPONSE_STATUS_SUCCESS = 0x0,
+	INTEL_GUC_RESPONSE_NOT_SUPPORTED = 0x20,
+	INTEL_GUC_RESPONSE_NO_ATTRIBUTE_TABLE = 0x201,
+	INTEL_GUC_RESPONSE_NO_DECRYPTION_KEY = 0x202,
+	INTEL_GUC_RESPONSE_DECRYPTION_FAILED = 0x204,
+	INTEL_GUC_RESPONSE_STATUS_GENERIC_FAIL = 0xF000,
+};
+
+enum intel_guc_load_status {
+	INTEL_GUC_LOAD_STATUS_DEFAULT                          = 0x00,
+	INTEL_GUC_LOAD_STATUS_START                            = 0x01,
+	INTEL_GUC_LOAD_STATUS_ERROR_DEVID_BUILD_MISMATCH       = 0x02,
+	INTEL_GUC_LOAD_STATUS_GUC_PREPROD_BUILD_MISMATCH       = 0x03,
+	INTEL_GUC_LOAD_STATUS_ERROR_DEVID_INVALID_GUCTYPE      = 0x04,
+	INTEL_GUC_LOAD_STATUS_HWCONFIG_START                   = 0x05,
+	INTEL_GUC_LOAD_STATUS_HWCONFIG_DONE                    = 0x06,
+	INTEL_GUC_LOAD_STATUS_HWCONFIG_ERROR                   = 0x07,
+	INTEL_GUC_LOAD_STATUS_GDT_DONE                         = 0x10,
+	INTEL_GUC_LOAD_STATUS_IDT_DONE                         = 0x20,
+	INTEL_GUC_LOAD_STATUS_LAPIC_DONE                       = 0x30,
+	INTEL_GUC_LOAD_STATUS_GUCINT_DONE                      = 0x40,
+	INTEL_GUC_LOAD_STATUS_DPC_READY                        = 0x50,
+	INTEL_GUC_LOAD_STATUS_DPC_ERROR                        = 0x60,
+	INTEL_GUC_LOAD_STATUS_EXCEPTION                        = 0x70,
+	INTEL_GUC_LOAD_STATUS_INIT_DATA_INVALID                = 0x71,
+	INTEL_GUC_LOAD_STATUS_PXP_TEARDOWN_CTRL_ENABLED        = 0x72,
+	INTEL_GUC_LOAD_STATUS_INVALID_INIT_DATA_RANGE_START,
+	INTEL_GUC_LOAD_STATUS_MPU_DATA_INVALID                 = 0x73,
+	INTEL_GUC_LOAD_STATUS_INIT_MMIO_SAVE_RESTORE_INVALID   = 0x74,
+	INTEL_GUC_LOAD_STATUS_INVALID_INIT_DATA_RANGE_END,
+
+	INTEL_GUC_LOAD_STATUS_READY                            = 0xF0,
+};
+
+enum intel_bootrom_load_status {
+	INTEL_BOOTROM_STATUS_NO_KEY_FOUND                 = 0x13,
+	INTEL_BOOTROM_STATUS_AES_PROD_KEY_FOUND           = 0x1A,
+	INTEL_BOOTROM_STATUS_PROD_KEY_CHECK_FAILURE       = 0x2B,
+	INTEL_BOOTROM_STATUS_RSA_FAILED                   = 0x50,
+	INTEL_BOOTROM_STATUS_PAVPC_FAILED                 = 0x73,
+	INTEL_BOOTROM_STATUS_WOPCM_FAILED                 = 0x74,
+	INTEL_BOOTROM_STATUS_LOADLOC_FAILED               = 0x75,
+	INTEL_BOOTROM_STATUS_JUMP_PASSED                  = 0x76,
+	INTEL_BOOTROM_STATUS_JUMP_FAILED                  = 0x77,
+	INTEL_BOOTROM_STATUS_RC6CTXCONFIG_FAILED          = 0x79,
+	INTEL_BOOTROM_STATUS_MPUMAP_INCORRECT             = 0x7A,
+	INTEL_BOOTROM_STATUS_EXCEPTION                    = 0x7E,
+};
+
+#endif /* _ABI_GUC_ERRORS_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_klvs_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_klvs_abi.h
new file mode 100644
index 0000000000..58012edd4e
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_klvs_abi.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_KLVS_ABI_H
+#define _ABI_GUC_KLVS_ABI_H
+
+#include <linux/types.h>
+
+/**
+ * DOC: GuC KLV
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 | 31:16 | **KEY** - KLV key identifier                                 |
+ *  |   |       |   - `GuC Self Config KLVs`_                                  |
+ *  |   |       |                                                              |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | **LEN** - length of VALUE (in 32bit dwords)                  |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 | **VALUE** - actual value of the KLV (format depends on KEY)  |
+ *  +---+-------+                                                              |
+ *  |...|       |                                                              |
+ *  +---+-------+                                                              |
+ *  | n |  31:0 |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_KLV_LEN_MIN				1u
+#define GUC_KLV_0_KEY				(0xffff << 16)
+#define GUC_KLV_0_LEN				(0xffff << 0)
+#define GUC_KLV_n_VALUE				(0xffffffff << 0)
+
+/**
+ * DOC: GuC Self Config KLVs
+ *
+ * `GuC KLV`_ keys available for use with HOST2GUC_SELF_CFG_.
+ *
+ * _`GUC_KLV_SELF_CFG_H2G_CTB_ADDR` : 0x0902
+ *      Refers to 64 bit Global Gfx address of H2G `CT Buffer`_.
+ *      Should be above WOPCM address but below APIC base address for native mode.
+ *
+ * _`GUC_KLV_SELF_CFG_H2G_CTB_DESCRIPTOR_ADDR` : 0x0903
+ *      Refers to 64 bit Global Gfx address of H2G `CTB Descriptor`_.
+ *      Should be above WOPCM address but below APIC base address for native mode.
+ *
+ * _`GUC_KLV_SELF_CFG_H2G_CTB_SIZE` : 0x0904
+ *      Refers to size of H2G `CT Buffer`_ in bytes.
+ *      Should be a multiple of 4K.
+ *
+ * _`GUC_KLV_SELF_CFG_G2H_CTB_ADDR` : 0x0905
+ *      Refers to 64 bit Global Gfx address of G2H `CT Buffer`_.
+ *      Should be above WOPCM address but below APIC base address for native mode.
+ *
+ * _`GUC_KLV_SELF_CFG_G2H_CTB_DESCRIPTOR_ADDR` : 0x0906
+ *      Refers to 64 bit Global Gfx address of G2H `CTB Descriptor`_.
+ *      Should be above WOPCM address but below APIC base address for native mode.
+ *
+ * _`GUC_KLV_SELF_CFG_G2H_CTB_SIZE` : 0x0907
+ *      Refers to size of G2H `CT Buffer`_ in bytes.
+ *      Should be a multiple of 4K.
+ */
+
+#define GUC_KLV_SELF_CFG_H2G_CTB_ADDR_KEY		0x0902
+#define GUC_KLV_SELF_CFG_H2G_CTB_ADDR_LEN		2u
+
+#define GUC_KLV_SELF_CFG_H2G_CTB_DESCRIPTOR_ADDR_KEY	0x0903
+#define GUC_KLV_SELF_CFG_H2G_CTB_DESCRIPTOR_ADDR_LEN	2u
+
+#define GUC_KLV_SELF_CFG_H2G_CTB_SIZE_KEY		0x0904
+#define GUC_KLV_SELF_CFG_H2G_CTB_SIZE_LEN		1u
+
+#define GUC_KLV_SELF_CFG_G2H_CTB_ADDR_KEY		0x0905
+#define GUC_KLV_SELF_CFG_G2H_CTB_ADDR_LEN		2u
+
+#define GUC_KLV_SELF_CFG_G2H_CTB_DESCRIPTOR_ADDR_KEY	0x0906
+#define GUC_KLV_SELF_CFG_G2H_CTB_DESCRIPTOR_ADDR_LEN	2u
+
+#define GUC_KLV_SELF_CFG_G2H_CTB_SIZE_KEY		0x0907
+#define GUC_KLV_SELF_CFG_G2H_CTB_SIZE_LEN		1u
+
+/*
+ * Global scheduling policy update keys.
+ */
+enum {
+	GUC_SCHEDULING_POLICIES_KLV_ID_RENDER_COMPUTE_YIELD	= 0x1001,
+};
+
+/*
+ * Per context scheduling policy update keys.
+ */
+enum {
+	GUC_CONTEXT_POLICIES_KLV_ID_EXECUTION_QUANTUM			= 0x2001,
+	GUC_CONTEXT_POLICIES_KLV_ID_PREEMPTION_TIMEOUT			= 0x2002,
+	GUC_CONTEXT_POLICIES_KLV_ID_SCHEDULING_PRIORITY			= 0x2003,
+	GUC_CONTEXT_POLICIES_KLV_ID_PREEMPT_TO_IDLE_ON_QUANTUM_EXPIRY	= 0x2004,
+	GUC_CONTEXT_POLICIES_KLV_ID_SLPM_GT_FREQUENCY			= 0x2005,
+
+	GUC_CONTEXT_POLICIES_KLV_NUM_IDS = 5,
+};
+
+#endif /* _ABI_GUC_KLVS_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
new file mode 100644
index 0000000000..98eb4f4657
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
@@ -0,0 +1,264 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_MESSAGES_ABI_H
+#define _ABI_GUC_MESSAGES_ABI_H
+
+/**
+ * DOC: HXG Message
+ *
+ * All messages exchanged with GuC are defined using 32 bit dwords.
+ * First dword is treated as a message header. Remaining dwords are optional.
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  |   |       |                                                              |
+ *  | 0 |    31 | **ORIGIN** - originator of the message                       |
+ *  |   |       |   - _`GUC_HXG_ORIGIN_HOST` = 0                               |
+ *  |   |       |   - _`GUC_HXG_ORIGIN_GUC` = 1                                |
+ *  |   |       |                                                              |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | **TYPE** - message type                                      |
+ *  |   |       |   - _`GUC_HXG_TYPE_REQUEST` = 0                              |
+ *  |   |       |   - _`GUC_HXG_TYPE_EVENT` = 1                                |
+ *  |   |       |   - _`GUC_HXG_TYPE_FAST_REQUEST` = 2                         |
+ *  |   |       |   - _`GUC_HXG_TYPE_NO_RESPONSE_BUSY` = 3                     |
+ *  |   |       |   - _`GUC_HXG_TYPE_NO_RESPONSE_RETRY` = 5                    |
+ *  |   |       |   - _`GUC_HXG_TYPE_RESPONSE_FAILURE` = 6                     |
+ *  |   |       |   - _`GUC_HXG_TYPE_RESPONSE_SUCCESS` = 7                     |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  27:0 | **AUX** - auxiliary data (depends on TYPE)                   |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 |                                                              |
+ *  +---+-------+                                                              |
+ *  |...|       | **PAYLOAD** - optional payload (depends on TYPE)             |
+ *  +---+-------+                                                              |
+ *  | n |  31:0 |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_MSG_MIN_LEN			1u
+#define GUC_HXG_MSG_0_ORIGIN			(0x1U << 31)
+#define   GUC_HXG_ORIGIN_HOST			0u
+#define   GUC_HXG_ORIGIN_GUC			1u
+#define GUC_HXG_MSG_0_TYPE			(0x7 << 28)
+#define   GUC_HXG_TYPE_REQUEST			0u
+#define   GUC_HXG_TYPE_EVENT			1u
+#define   GUC_HXG_TYPE_FAST_REQUEST		2u
+#define   GUC_HXG_TYPE_NO_RESPONSE_BUSY		3u
+#define   GUC_HXG_TYPE_NO_RESPONSE_RETRY	5u
+#define   GUC_HXG_TYPE_RESPONSE_FAILURE		6u
+#define   GUC_HXG_TYPE_RESPONSE_SUCCESS		7u
+#define GUC_HXG_MSG_0_AUX			(0xfffffff << 0)
+#define GUC_HXG_MSG_n_PAYLOAD			(0xffffffff << 0)
+
+/**
+ * DOC: HXG Request
+ *
+ * The `HXG Request`_ message should be used to initiate synchronous activity
+ * for which confirmation or return data is expected.
+ *
+ * The recipient of this message shall use `HXG Response`_, `HXG Failure`_
+ * or `HXG Retry`_ message as a definite reply, and may use `HXG Busy`_
+ * message as a intermediate reply.
+ *
+ * Format of @DATA0 and all @DATAn fields depends on the @ACTION code.
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_                                 |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 27:16 | **DATA0** - request data (depends on ACTION)                 |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | **ACTION** - requested action code                           |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 |                                                              |
+ *  +---+-------+                                                              |
+ *  |...|       | **DATAn** - optional data (depends on ACTION)                |
+ *  +---+-------+                                                              |
+ *  | n |  31:0 |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_REQUEST_MSG_MIN_LEN		GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_REQUEST_MSG_0_DATA0		(0xfff << 16)
+#define GUC_HXG_REQUEST_MSG_0_ACTION		(0xffff << 0)
+#define GUC_HXG_REQUEST_MSG_n_DATAn		GUC_HXG_MSG_n_PAYLOAD
+
+/**
+ * DOC: HXG Fast Request
+ *
+ * The `HXG Request`_ message should be used to initiate asynchronous activity
+ * for which confirmation or return data is not expected.
+ *
+ * If confirmation is required then `HXG Request`_ shall be used instead.
+ *
+ * The recipient of this message may only use `HXG Failure`_ message if it was
+ * unable to accept this request (like invalid data).
+ *
+ * Format of `HXG Fast Request`_ message is same as `HXG Request`_ except @TYPE.
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN - see `HXG Message`_                                  |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = `GUC_HXG_TYPE_FAST_REQUEST`_                          |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 27:16 | DATA0 - see `HXG Request`_                                   |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | ACTION - see `HXG Request`_                                  |
+ *  +---+-------+--------------------------------------------------------------+
+ *  |...|       | DATAn - see `HXG Request`_                                   |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+/**
+ * DOC: HXG Event
+ *
+ * The `HXG Event`_ message should be used to initiate asynchronous activity
+ * that does not involves immediate confirmation nor data.
+ *
+ * Format of @DATA0 and all @DATAn fields depends on the @ACTION code.
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_EVENT_                                   |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 27:16 | **DATA0** - event data (depends on ACTION)                   |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | **ACTION** - event action code                               |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 |                                                              |
+ *  +---+-------+                                                              |
+ *  |...|       | **DATAn** - optional event  data (depends on ACTION)         |
+ *  +---+-------+                                                              |
+ *  | n |  31:0 |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_EVENT_MSG_MIN_LEN		GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_EVENT_MSG_0_DATA0		(0xfff << 16)
+#define GUC_HXG_EVENT_MSG_0_ACTION		(0xffff << 0)
+#define GUC_HXG_EVENT_MSG_n_DATAn		GUC_HXG_MSG_n_PAYLOAD
+
+/**
+ * DOC: HXG Busy
+ *
+ * The `HXG Busy`_ message may be used to acknowledge reception of the `HXG Request`_
+ * message if the recipient expects that it processing will be longer than default
+ * timeout.
+ *
+ * The @COUNTER field may be used as a progress indicator.
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_BUSY_                        |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  27:0 | **COUNTER** - progress indicator                             |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_BUSY_MSG_LEN			GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_BUSY_MSG_0_COUNTER		GUC_HXG_MSG_0_AUX
+
+/**
+ * DOC: HXG Retry
+ *
+ * The `HXG Retry`_ message should be used by recipient to indicate that the
+ * `HXG Request`_ message was dropped and it should be resent again.
+ *
+ * The @REASON field may be used to provide additional information.
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_RETRY_                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  27:0 | **REASON** - reason for retry                                |
+ *  |   |       |  - _`GUC_HXG_RETRY_REASON_UNSPECIFIED` = 0                   |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_RETRY_MSG_LEN			GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_RETRY_MSG_0_REASON		GUC_HXG_MSG_0_AUX
+#define   GUC_HXG_RETRY_REASON_UNSPECIFIED	0u
+
+/**
+ * DOC: HXG Failure
+ *
+ * The `HXG Failure`_ message shall be used as a reply to the `HXG Request`_
+ * message that could not be processed due to an error.
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_FAILURE_                        |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 27:16 | **HINT** - additional error hint                             |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | **ERROR** - error/result code                                |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_FAILURE_MSG_LEN			GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_FAILURE_MSG_0_HINT		(0xfff << 16)
+#define GUC_HXG_FAILURE_MSG_0_ERROR		(0xffff << 0)
+
+/**
+ * DOC: HXG Response
+ *
+ * The `HXG Response`_ message shall be used as a reply to the `HXG Request`_
+ * message that was successfully processed without an error.
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_                        |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  27:0 | **DATA0** - data (depends on ACTION from `HXG Request`_)     |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 |                                                              |
+ *  +---+-------+                                                              |
+ *  |...|       | **DATAn** - data (depends on ACTION from `HXG Request`_)     |
+ *  +---+-------+                                                              |
+ *  | n |  31:0 |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_RESPONSE_MSG_MIN_LEN		GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_RESPONSE_MSG_0_DATA0		GUC_HXG_MSG_0_AUX
+#define GUC_HXG_RESPONSE_MSG_n_DATAn		GUC_HXG_MSG_n_PAYLOAD
+
+/* deprecated */
+#define INTEL_GUC_MSG_TYPE_SHIFT	28
+#define INTEL_GUC_MSG_TYPE_MASK		(0xF << INTEL_GUC_MSG_TYPE_SHIFT)
+#define INTEL_GUC_MSG_DATA_SHIFT	16
+#define INTEL_GUC_MSG_DATA_MASK		(0xFFF << INTEL_GUC_MSG_DATA_SHIFT)
+#define INTEL_GUC_MSG_CODE_SHIFT	0
+#define INTEL_GUC_MSG_CODE_MASK		(0xFFFF << INTEL_GUC_MSG_CODE_SHIFT)
+
+enum intel_guc_msg_type {
+	INTEL_GUC_MSG_TYPE_REQUEST = 0x0,
+	INTEL_GUC_MSG_TYPE_RESPONSE = 0xF,
+};
+
+#endif /* _ABI_GUC_MESSAGES_ABI_H */