Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 354 insertions, 0 deletions

diff --git a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c
new file mode 100644
index 0000000000..79566c9ea8
--- /dev/null
+++ b/drivers/gpu/drm/tegra/rgb.c
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Avionic Design GmbH
+ * Copyright (C) 2012 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/of.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#include "drm.h"
+#include "dc.h"
+
+struct tegra_rgb {
+	struct tegra_output output;
+	struct tegra_dc *dc;
+
+	struct clk *pll_d_out0;
+	struct clk *pll_d2_out0;
+	struct clk *clk_parent;
+	struct clk *clk;
+};
+
+static inline struct tegra_rgb *to_rgb(struct tegra_output *output)
+{
+	return container_of(output, struct tegra_rgb, output);
+}
+
+struct reg_entry {
+	unsigned long offset;
+	unsigned long value;
+};
+
+static const struct reg_entry rgb_enable[] = {
+	{ DC_COM_PIN_OUTPUT_ENABLE(0),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_ENABLE(1),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_ENABLE(2),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_ENABLE(3),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 },
+	{ DC_COM_PIN_OUTPUT_POLARITY(1), 0x01000000 },
+	{ DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 },
+	{ DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 },
+	{ DC_COM_PIN_OUTPUT_DATA(0),     0x00000000 },
+	{ DC_COM_PIN_OUTPUT_DATA(1),     0x00000000 },
+	{ DC_COM_PIN_OUTPUT_DATA(2),     0x00000000 },
+	{ DC_COM_PIN_OUTPUT_DATA(3),     0x00000000 },
+	{ DC_COM_PIN_OUTPUT_SELECT(0),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_SELECT(1),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_SELECT(2),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_SELECT(3),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_SELECT(4),   0x00210222 },
+	{ DC_COM_PIN_OUTPUT_SELECT(5),   0x00002200 },
+	{ DC_COM_PIN_OUTPUT_SELECT(6),   0x00020000 },
+};
+
+static const struct reg_entry rgb_disable[] = {
+	{ DC_COM_PIN_OUTPUT_SELECT(6),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_SELECT(5),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_SELECT(4),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_SELECT(3),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_SELECT(2),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_SELECT(1),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_SELECT(0),   0x00000000 },
+	{ DC_COM_PIN_OUTPUT_DATA(3),     0xaaaaaaaa },
+	{ DC_COM_PIN_OUTPUT_DATA(2),     0xaaaaaaaa },
+	{ DC_COM_PIN_OUTPUT_DATA(1),     0xaaaaaaaa },
+	{ DC_COM_PIN_OUTPUT_DATA(0),     0xaaaaaaaa },
+	{ DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 },
+	{ DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 },
+	{ DC_COM_PIN_OUTPUT_POLARITY(1), 0x00000000 },
+	{ DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 },
+	{ DC_COM_PIN_OUTPUT_ENABLE(3),   0x55555555 },
+	{ DC_COM_PIN_OUTPUT_ENABLE(2),   0x55555555 },
+	{ DC_COM_PIN_OUTPUT_ENABLE(1),   0x55150005 },
+	{ DC_COM_PIN_OUTPUT_ENABLE(0),   0x55555555 },
+};
+
+static void tegra_dc_write_regs(struct tegra_dc *dc,
+				const struct reg_entry *table,
+				unsigned int num)
+{
+	unsigned int i;
+
+	for (i = 0; i < num; i++)
+		tegra_dc_writel(dc, table[i].value, table[i].offset);
+}
+
+static void tegra_rgb_encoder_disable(struct drm_encoder *encoder)
+{
+	struct tegra_output *output = encoder_to_output(encoder);
+	struct tegra_rgb *rgb = to_rgb(output);
+
+	tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable));
+	tegra_dc_commit(rgb->dc);
+}
+
+static void tegra_rgb_encoder_enable(struct drm_encoder *encoder)
+{
+	struct tegra_output *output = encoder_to_output(encoder);
+	struct tegra_rgb *rgb = to_rgb(output);
+	u32 value;
+
+	tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable));
+
+	value = DE_SELECT_ACTIVE | DE_CONTROL_NORMAL;
+	tegra_dc_writel(rgb->dc, value, DC_DISP_DATA_ENABLE_OPTIONS);
+
+	/* XXX: parameterize? */
+	value = tegra_dc_readl(rgb->dc, DC_COM_PIN_OUTPUT_POLARITY(1));
+	value &= ~LVS_OUTPUT_POLARITY_LOW;
+	value &= ~LHS_OUTPUT_POLARITY_LOW;
+	tegra_dc_writel(rgb->dc, value, DC_COM_PIN_OUTPUT_POLARITY(1));
+
+	/* XXX: parameterize? */
+	value = DISP_DATA_FORMAT_DF1P1C | DISP_ALIGNMENT_MSB |
+		DISP_ORDER_RED_BLUE;
+	tegra_dc_writel(rgb->dc, value, DC_DISP_DISP_INTERFACE_CONTROL);
+
+	tegra_dc_commit(rgb->dc);
+}
+
+static bool tegra_rgb_pll_rate_change_allowed(struct tegra_rgb *rgb)
+{
+	if (!rgb->pll_d2_out0)
+		return false;
+
+	if (!clk_is_match(rgb->clk_parent, rgb->pll_d_out0) &&
+	    !clk_is_match(rgb->clk_parent, rgb->pll_d2_out0))
+		return false;
+
+	return true;
+}
+
+static int
+tegra_rgb_encoder_atomic_check(struct drm_encoder *encoder,
+			       struct drm_crtc_state *crtc_state,
+			       struct drm_connector_state *conn_state)
+{
+	struct tegra_output *output = encoder_to_output(encoder);
+	struct tegra_dc *dc = to_tegra_dc(conn_state->crtc);
+	unsigned long pclk = crtc_state->mode.clock * 1000;
+	struct tegra_rgb *rgb = to_rgb(output);
+	unsigned int div;
+	int err;
+
+	/*
+	 * We may not want to change the frequency of the parent clock, since
+	 * it may be a parent for other peripherals. This is due to the fact
+	 * that on Tegra20 there's only a single clock dedicated to display
+	 * (pll_d_out0), whereas later generations have a second one that can
+	 * be used to independently drive a second output (pll_d2_out0).
+	 *
+	 * As a way to support multiple outputs on Tegra20 as well, pll_p is
+	 * typically used as the parent clock for the display controllers.
+	 * But this comes at a cost: pll_p is the parent of several other
+	 * peripherals, so its frequency shouldn't change out of the blue.
+	 *
+	 * The best we can do at this point is to use the shift clock divider
+	 * and hope that the desired frequency can be matched (or at least
+	 * matched sufficiently close that the panel will still work).
+	 */
+	if (tegra_rgb_pll_rate_change_allowed(rgb)) {
+		/*
+		 * Set display controller clock to x2 of PCLK in order to
+		 * produce higher resolution pulse positions.
+		 */
+		div = 2;
+		pclk *= 2;
+	} else {
+		div = ((clk_get_rate(rgb->clk) * 2) / pclk) - 2;
+		pclk = 0;
+	}
+
+	err = tegra_dc_state_setup_clock(dc, crtc_state, rgb->clk_parent,
+					 pclk, div);
+	if (err < 0) {
+		dev_err(output->dev, "failed to setup CRTC state: %d\n", err);
+		return err;
+	}
+
+	return err;
+}
+
+static const struct drm_encoder_helper_funcs tegra_rgb_encoder_helper_funcs = {
+	.disable = tegra_rgb_encoder_disable,
+	.enable = tegra_rgb_encoder_enable,
+	.atomic_check = tegra_rgb_encoder_atomic_check,
+};
+
+int tegra_dc_rgb_probe(struct tegra_dc *dc)
+{
+	struct device_node *np;
+	struct tegra_rgb *rgb;
+	int err;
+
+	np = of_get_child_by_name(dc->dev->of_node, "rgb");
+	if (!np || !of_device_is_available(np))
+		return -ENODEV;
+
+	rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL);
+	if (!rgb)
+		return -ENOMEM;
+
+	rgb->output.dev = dc->dev;
+	rgb->output.of_node = np;
+	rgb->dc = dc;
+
+	err = tegra_output_probe(&rgb->output);
+	if (err < 0)
+		return err;
+
+	rgb->clk = devm_clk_get(dc->dev, NULL);
+	if (IS_ERR(rgb->clk)) {
+		dev_err(dc->dev, "failed to get clock\n");
+		return PTR_ERR(rgb->clk);
+	}
+
+	rgb->clk_parent = devm_clk_get(dc->dev, "parent");
+	if (IS_ERR(rgb->clk_parent)) {
+		dev_err(dc->dev, "failed to get parent clock\n");
+		return PTR_ERR(rgb->clk_parent);
+	}
+
+	err = clk_set_parent(rgb->clk, rgb->clk_parent);
+	if (err < 0) {
+		dev_err(dc->dev, "failed to set parent clock: %d\n", err);
+		return err;
+	}
+
+	rgb->pll_d_out0 = clk_get_sys(NULL, "pll_d_out0");
+	if (IS_ERR(rgb->pll_d_out0)) {
+		err = PTR_ERR(rgb->pll_d_out0);
+		dev_err(dc->dev, "failed to get pll_d_out0: %d\n", err);
+		return err;
+	}
+
+	if (dc->soc->has_pll_d2_out0) {
+		rgb->pll_d2_out0 = clk_get_sys(NULL, "pll_d2_out0");
+		if (IS_ERR(rgb->pll_d2_out0)) {
+			err = PTR_ERR(rgb->pll_d2_out0);
+			dev_err(dc->dev, "failed to get pll_d2_out0: %d\n", err);
+			return err;
+		}
+	}
+
+	dc->rgb = &rgb->output;
+
+	return 0;
+}
+
+void tegra_dc_rgb_remove(struct tegra_dc *dc)
+{
+	struct tegra_rgb *rgb;
+
+	if (!dc->rgb)
+		return;
+
+	rgb = to_rgb(dc->rgb);
+	clk_put(rgb->pll_d2_out0);
+	clk_put(rgb->pll_d_out0);
+
+	tegra_output_remove(dc->rgb);
+	dc->rgb = NULL;
+}
+
+int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc)
+{
+	struct tegra_output *output = dc->rgb;
+	struct drm_connector *connector;
+	int err;
+
+	if (!dc->rgb)
+		return -ENODEV;
+
+	drm_simple_encoder_init(drm, &output->encoder, DRM_MODE_ENCODER_LVDS);
+	drm_encoder_helper_add(&output->encoder,
+			       &tegra_rgb_encoder_helper_funcs);
+
+	/*
+	 * Wrap directly-connected panel into DRM bridge in order to let
+	 * DRM core to handle panel for us.
+	 */
+	if (output->panel) {
+		output->bridge = devm_drm_panel_bridge_add(output->dev,
+							   output->panel);
+		if (IS_ERR(output->bridge)) {
+			dev_err(output->dev,
+				"failed to wrap panel into bridge: %pe\n",
+				output->bridge);
+			return PTR_ERR(output->bridge);
+		}
+
+		output->panel = NULL;
+	}
+
+	/*
+	 * Tegra devices that have LVDS panel utilize LVDS encoder bridge
+	 * for converting up to 28 LCD LVTTL lanes into 5/4 LVDS lanes that
+	 * go to display panel's receiver.
+	 *
+	 * Encoder usually have a power-down control which needs to be enabled
+	 * in order to transmit data to the panel.  Historically devices that
+	 * use an older device-tree version didn't model the bridge, assuming
+	 * that encoder is turned ON by default, while today's DRM allows us
+	 * to model LVDS encoder properly.
+	 *
+	 * Newer device-trees utilize LVDS encoder bridge, which provides
+	 * us with a connector and handles the display panel.
+	 *
+	 * For older device-trees we wrapped panel into the panel-bridge.
+	 */
+	if (output->bridge) {
+		err = drm_bridge_attach(&output->encoder, output->bridge,
+					NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+		if (err)
+			return err;
+
+		connector = drm_bridge_connector_init(drm, &output->encoder);
+		if (IS_ERR(connector)) {
+			dev_err(output->dev,
+				"failed to initialize bridge connector: %pe\n",
+				connector);
+			return PTR_ERR(connector);
+		}
+
+		drm_connector_attach_encoder(connector, &output->encoder);
+	}
+
+	err = tegra_output_init(drm, output);
+	if (err < 0) {
+		dev_err(output->dev, "failed to initialize output: %d\n", err);
+		return err;
+	}
+
+	/*
+	 * Other outputs can be attached to either display controller. The RGB
+	 * outputs are an exception and work only with their parent display
+	 * controller.
+	 */
+	output->encoder.possible_crtcs = drm_crtc_mask(&dc->base);
+
+	return 0;
+}
+
+int tegra_dc_rgb_exit(struct tegra_dc *dc)
+{
+	if (dc->rgb)
+		tegra_output_exit(dc->rgb);
+
+	return 0;
+}