Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 609 insertions, 0 deletions

diff --git a/drivers/hwmon/asus_rog_ryujin.c b/drivers/hwmon/asus_rog_ryujin.c
new file mode 100644
index 0000000000..f8b20346a9
--- /dev/null
+++ b/drivers/hwmon/asus_rog_ryujin.c
@@ -0,0 +1,609 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * hwmon driver for Asus ROG Ryujin II 360 AIO cooler.
+ *
+ * Copyright 2024 Aleksa Savic <savicaleksa83@gmail.com>
+ */
+
+#include <linux/debugfs.h>
+#include <linux/hid.h>
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/unaligned.h>
+
+#define DRIVER_NAME	"asus_rog_ryujin"
+
+#define USB_VENDOR_ID_ASUS_ROG		0x0b05
+#define USB_PRODUCT_ID_RYUJIN_AIO	0x1988	/* ASUS ROG RYUJIN II 360 */
+
+#define STATUS_VALIDITY		1500	/* ms */
+#define MAX_REPORT_LENGTH	65
+
+/* Cooler status report offsets */
+#define RYUJIN_TEMP_SENSOR_1		3
+#define RYUJIN_TEMP_SENSOR_2		4
+#define RYUJIN_PUMP_SPEED		5
+#define RYUJIN_INTERNAL_FAN_SPEED	7
+
+/* Cooler duty report offsets */
+#define RYUJIN_PUMP_DUTY		4
+#define RYUJIN_INTERNAL_FAN_DUTY	5
+
+/* Controller status (speeds) report offsets */
+#define RYUJIN_CONTROLLER_SPEED_1	5
+#define RYUJIN_CONTROLLER_SPEED_2	7
+#define RYUJIN_CONTROLLER_SPEED_3	9
+#define RYUJIN_CONTROLLER_SPEED_4	3
+
+/* Controller duty report offsets */
+#define RYUJIN_CONTROLLER_DUTY		4
+
+/* Control commands and their inner offsets */
+#define RYUJIN_CMD_PREFIX	0xEC
+
+static const u8 get_cooler_status_cmd[] = { RYUJIN_CMD_PREFIX, 0x99 };
+static const u8 get_cooler_duty_cmd[] = { RYUJIN_CMD_PREFIX, 0x9A };
+static const u8 get_controller_speed_cmd[] = { RYUJIN_CMD_PREFIX, 0xA0 };
+static const u8 get_controller_duty_cmd[] = { RYUJIN_CMD_PREFIX, 0xA1 };
+
+#define RYUJIN_SET_COOLER_PUMP_DUTY_OFFSET	3
+#define RYUJIN_SET_COOLER_FAN_DUTY_OFFSET	4
+static const u8 set_cooler_duty_cmd[] = { RYUJIN_CMD_PREFIX, 0x1A, 0x00, 0x00, 0x00 };
+
+#define RYUJIN_SET_CONTROLLER_FAN_DUTY_OFFSET	4
+static const u8 set_controller_duty_cmd[] = { RYUJIN_CMD_PREFIX, 0x21, 0x00, 0x00, 0x00 };
+
+/* Command lengths */
+#define GET_CMD_LENGTH	2	/* Same length for all get commands */
+#define SET_CMD_LENGTH	5	/* Same length for all set commands */
+
+/* Command response headers */
+#define RYUJIN_GET_COOLER_STATUS_CMD_RESPONSE		0x19
+#define RYUJIN_GET_COOLER_DUTY_CMD_RESPONSE		0x1A
+#define RYUJIN_GET_CONTROLLER_SPEED_CMD_RESPONSE	0x20
+#define RYUJIN_GET_CONTROLLER_DUTY_CMD_RESPONSE		0x21
+
+static const char *const rog_ryujin_temp_label[] = {
+	"Coolant temp"
+};
+
+static const char *const rog_ryujin_speed_label[] = {
+	"Pump speed",
+	"Internal fan speed",
+	"Controller fan 1 speed",
+	"Controller fan 2 speed",
+	"Controller fan 3 speed",
+	"Controller fan 4 speed",
+};
+
+struct rog_ryujin_data {
+	struct hid_device *hdev;
+	struct device *hwmon_dev;
+	/* For locking access to buffer */
+	struct mutex buffer_lock;
+	/* For queueing multiple readers */
+	struct mutex status_report_request_mutex;
+	/* For reinitializing the completions below */
+	spinlock_t status_report_request_lock;
+	struct completion cooler_status_received;
+	struct completion controller_status_received;
+	struct completion cooler_duty_received;
+	struct completion controller_duty_received;
+	struct completion cooler_duty_set;
+	struct completion controller_duty_set;
+
+	/* Sensor data */
+	s32 temp_input[1];
+	u16 speed_input[6];	/* Pump, internal fan and four controller fan speeds in RPM */
+	u8 duty_input[3];	/* Pump, internal fan and controller fan duty in PWM */
+
+	u8 *buffer;
+	unsigned long updated;	/* jiffies */
+};
+
+static int rog_ryujin_percent_to_pwm(u16 val)
+{
+	return DIV_ROUND_CLOSEST(val * 255, 100);
+}
+
+static int rog_ryujin_pwm_to_percent(long val)
+{
+	return DIV_ROUND_CLOSEST(val * 100, 255);
+}
+
+static umode_t rog_ryujin_is_visible(const void *data,
+				     enum hwmon_sensor_types type, u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_label:
+		case hwmon_temp_input:
+			return 0444;
+		default:
+			break;
+		}
+		break;
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_label:
+		case hwmon_fan_input:
+			return 0444;
+		default:
+			break;
+		}
+		break;
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+			return 0644;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/* Writes the command to the device with the rest of the report filled with zeroes */
+static int rog_ryujin_write_expanded(struct rog_ryujin_data *priv, const u8 *cmd, int cmd_length)
+{
+	int ret;
+
+	mutex_lock(&priv->buffer_lock);
+
+	memcpy_and_pad(priv->buffer, MAX_REPORT_LENGTH, cmd, cmd_length, 0x00);
+	ret = hid_hw_output_report(priv->hdev, priv->buffer, MAX_REPORT_LENGTH);
+
+	mutex_unlock(&priv->buffer_lock);
+	return ret;
+}
+
+/* Assumes priv->status_report_request_mutex is locked */
+static int rog_ryujin_execute_cmd(struct rog_ryujin_data *priv, const u8 *cmd, int cmd_length,
+				  struct completion *status_completion)
+{
+	int ret;
+
+	/*
+	 * Disable raw event parsing for a moment to safely reinitialize the
+	 * completion. Reinit is done because hidraw could have triggered
+	 * the raw event parsing and marked the passed in completion as done.
+	 */
+	spin_lock_bh(&priv->status_report_request_lock);
+	reinit_completion(status_completion);
+	spin_unlock_bh(&priv->status_report_request_lock);
+
+	/* Send command for getting data */
+	ret = rog_ryujin_write_expanded(priv, cmd, cmd_length);
+	if (ret < 0)
+		return ret;
+
+	ret = wait_for_completion_interruptible_timeout(status_completion,
+							msecs_to_jiffies(STATUS_VALIDITY));
+	if (ret == 0)
+		return -ETIMEDOUT;
+	else if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int rog_ryujin_get_status(struct rog_ryujin_data *priv)
+{
+	int ret = mutex_lock_interruptible(&priv->status_report_request_mutex);
+
+	if (ret < 0)
+		return ret;
+
+	if (!time_after(jiffies, priv->updated + msecs_to_jiffies(STATUS_VALIDITY))) {
+		/* Data is up to date */
+		goto unlock_and_return;
+	}
+
+	/* Retrieve cooler status */
+	ret =
+	    rog_ryujin_execute_cmd(priv, get_cooler_status_cmd, GET_CMD_LENGTH,
+				   &priv->cooler_status_received);
+	if (ret < 0)
+		goto unlock_and_return;
+
+	/* Retrieve controller status (speeds) */
+	ret =
+	    rog_ryujin_execute_cmd(priv, get_controller_speed_cmd, GET_CMD_LENGTH,
+				   &priv->controller_status_received);
+	if (ret < 0)
+		goto unlock_and_return;
+
+	/* Retrieve cooler duty */
+	ret =
+	    rog_ryujin_execute_cmd(priv, get_cooler_duty_cmd, GET_CMD_LENGTH,
+				   &priv->cooler_duty_received);
+	if (ret < 0)
+		goto unlock_and_return;
+
+	/* Retrieve controller duty */
+	ret =
+	    rog_ryujin_execute_cmd(priv, get_controller_duty_cmd, GET_CMD_LENGTH,
+				   &priv->controller_duty_received);
+	if (ret < 0)
+		goto unlock_and_return;
+
+	priv->updated = jiffies;
+
+unlock_and_return:
+	mutex_unlock(&priv->status_report_request_mutex);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int rog_ryujin_read(struct device *dev, enum hwmon_sensor_types type,
+			   u32 attr, int channel, long *val)
+{
+	struct rog_ryujin_data *priv = dev_get_drvdata(dev);
+	int ret = rog_ryujin_get_status(priv);
+
+	if (ret < 0)
+		return ret;
+
+	switch (type) {
+	case hwmon_temp:
+		*val = priv->temp_input[channel];
+		break;
+	case hwmon_fan:
+		*val = priv->speed_input[channel];
+		break;
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+			*val = priv->duty_input[channel];
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		break;
+	default:
+		return -EOPNOTSUPP;	/* unreachable */
+	}
+
+	return 0;
+}
+
+static int rog_ryujin_read_string(struct device *dev, enum hwmon_sensor_types type,
+				  u32 attr, int channel, const char **str)
+{
+	switch (type) {
+	case hwmon_temp:
+		*str = rog_ryujin_temp_label[channel];
+		break;
+	case hwmon_fan:
+		*str = rog_ryujin_speed_label[channel];
+		break;
+	default:
+		return -EOPNOTSUPP;	/* unreachable */
+	}
+
+	return 0;
+}
+
+static int rog_ryujin_write_fixed_duty(struct rog_ryujin_data *priv, int channel, int val)
+{
+	u8 set_cmd[SET_CMD_LENGTH];
+	int ret;
+
+	if (channel < 2) {
+		/*
+		 * Retrieve cooler duty since both pump and internal fan are set
+		 * together, then write back with one of them modified.
+		 */
+		ret = mutex_lock_interruptible(&priv->status_report_request_mutex);
+		if (ret < 0)
+			return ret;
+		ret =
+		    rog_ryujin_execute_cmd(priv, get_cooler_duty_cmd, GET_CMD_LENGTH,
+					   &priv->cooler_duty_received);
+		if (ret < 0)
+			goto unlock_and_return;
+
+		memcpy(set_cmd, set_cooler_duty_cmd, SET_CMD_LENGTH);
+
+		/* Cooler duties are set as 0-100% */
+		val = rog_ryujin_pwm_to_percent(val);
+
+		if (channel == 0) {
+			/* Cooler pump duty */
+			set_cmd[RYUJIN_SET_COOLER_PUMP_DUTY_OFFSET] = val;
+			set_cmd[RYUJIN_SET_COOLER_FAN_DUTY_OFFSET] =
+			    rog_ryujin_pwm_to_percent(priv->duty_input[1]);
+		} else if (channel == 1) {
+			/* Cooler internal fan duty */
+			set_cmd[RYUJIN_SET_COOLER_PUMP_DUTY_OFFSET] =
+			    rog_ryujin_pwm_to_percent(priv->duty_input[0]);
+			set_cmd[RYUJIN_SET_COOLER_FAN_DUTY_OFFSET] = val;
+		}
+
+		ret = rog_ryujin_execute_cmd(priv, set_cmd, SET_CMD_LENGTH, &priv->cooler_duty_set);
+unlock_and_return:
+		mutex_unlock(&priv->status_report_request_mutex);
+		if (ret < 0)
+			return ret;
+	} else {
+		/*
+		 * Controller fan duty (channel == 2). No need to retrieve current
+		 * duty, so just send the command.
+		 */
+		memcpy(set_cmd, set_controller_duty_cmd, SET_CMD_LENGTH);
+		set_cmd[RYUJIN_SET_CONTROLLER_FAN_DUTY_OFFSET] = val;
+
+		ret =
+		    rog_ryujin_execute_cmd(priv, set_cmd, SET_CMD_LENGTH,
+					   &priv->controller_duty_set);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Lock onto this value until next refresh cycle */
+	priv->duty_input[channel] = val;
+
+	return 0;
+}
+
+static int rog_ryujin_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
+			    long val)
+{
+	struct rog_ryujin_data *priv = dev_get_drvdata(dev);
+	int ret;
+
+	switch (type) {
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+			if (val < 0 || val > 255)
+				return -EINVAL;
+
+			ret = rog_ryujin_write_fixed_duty(priv, channel, val);
+			if (ret < 0)
+				return ret;
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static const struct hwmon_ops rog_ryujin_hwmon_ops = {
+	.is_visible = rog_ryujin_is_visible,
+	.read = rog_ryujin_read,
+	.read_string = rog_ryujin_read_string,
+	.write = rog_ryujin_write
+};
+
+static const struct hwmon_channel_info *rog_ryujin_info[] = {
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_LABEL),
+	HWMON_CHANNEL_INFO(fan,
+			   HWMON_F_INPUT | HWMON_F_LABEL,
+			   HWMON_F_INPUT | HWMON_F_LABEL,
+			   HWMON_F_INPUT | HWMON_F_LABEL,
+			   HWMON_F_INPUT | HWMON_F_LABEL,
+			   HWMON_F_INPUT | HWMON_F_LABEL,
+			   HWMON_F_INPUT | HWMON_F_LABEL),
+	HWMON_CHANNEL_INFO(pwm,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT),
+	NULL
+};
+
+static const struct hwmon_chip_info rog_ryujin_chip_info = {
+	.ops = &rog_ryujin_hwmon_ops,
+	.info = rog_ryujin_info,
+};
+
+static int rog_ryujin_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
+				int size)
+{
+	struct rog_ryujin_data *priv = hid_get_drvdata(hdev);
+
+	if (data[0] != RYUJIN_CMD_PREFIX)
+		return 0;
+
+	if (data[1] == RYUJIN_GET_COOLER_STATUS_CMD_RESPONSE) {
+		/* Received coolant temp and speeds of pump and internal fan */
+		priv->temp_input[0] =
+		    data[RYUJIN_TEMP_SENSOR_1] * 1000 + data[RYUJIN_TEMP_SENSOR_2] * 100;
+		priv->speed_input[0] = get_unaligned_le16(data + RYUJIN_PUMP_SPEED);
+		priv->speed_input[1] = get_unaligned_le16(data + RYUJIN_INTERNAL_FAN_SPEED);
+
+		if (!completion_done(&priv->cooler_status_received))
+			complete_all(&priv->cooler_status_received);
+	} else if (data[1] == RYUJIN_GET_CONTROLLER_SPEED_CMD_RESPONSE) {
+		/* Received speeds of four fans attached to the controller */
+		priv->speed_input[2] = get_unaligned_le16(data + RYUJIN_CONTROLLER_SPEED_1);
+		priv->speed_input[3] = get_unaligned_le16(data + RYUJIN_CONTROLLER_SPEED_2);
+		priv->speed_input[4] = get_unaligned_le16(data + RYUJIN_CONTROLLER_SPEED_3);
+		priv->speed_input[5] = get_unaligned_le16(data + RYUJIN_CONTROLLER_SPEED_4);
+
+		if (!completion_done(&priv->controller_status_received))
+			complete_all(&priv->controller_status_received);
+	} else if (data[1] == RYUJIN_GET_COOLER_DUTY_CMD_RESPONSE) {
+		/* Received report for pump and internal fan duties (in %) */
+		if (data[RYUJIN_PUMP_DUTY] == 0 && data[RYUJIN_INTERNAL_FAN_DUTY] == 0) {
+			/*
+			 * We received a report with zeroes for duty in both places.
+			 * The device returns this as a confirmation that setting values
+			 * is successful. If we initiated a write, mark it as complete.
+			 */
+			if (!completion_done(&priv->cooler_duty_set))
+				complete_all(&priv->cooler_duty_set);
+			else if (!completion_done(&priv->cooler_duty_received))
+				/*
+				 * We didn't initiate a write, but received both zeroes.
+				 * This means that either both duties are actually zero,
+				 * or that we received a success report caused by userspace.
+				 * We're expecting a report, so parse it.
+				 */
+				goto read_cooler_duty;
+			return 0;
+		}
+read_cooler_duty:
+		priv->duty_input[0] = rog_ryujin_percent_to_pwm(data[RYUJIN_PUMP_DUTY]);
+		priv->duty_input[1] = rog_ryujin_percent_to_pwm(data[RYUJIN_INTERNAL_FAN_DUTY]);
+
+		if (!completion_done(&priv->cooler_duty_received))
+			complete_all(&priv->cooler_duty_received);
+	} else if (data[1] == RYUJIN_GET_CONTROLLER_DUTY_CMD_RESPONSE) {
+		/* Received report for controller duty for fans (in PWM) */
+		if (data[RYUJIN_CONTROLLER_DUTY] == 0) {
+			/*
+			 * We received a report with a zero for duty. The device returns this as
+			 * a confirmation that setting the controller duty value was successful.
+			 * If we initiated a write, mark it as complete.
+			 */
+			if (!completion_done(&priv->controller_duty_set))
+				complete_all(&priv->controller_duty_set);
+			else if (!completion_done(&priv->controller_duty_received))
+				/*
+				 * We didn't initiate a write, but received a zero for duty.
+				 * This means that either the duty is actually zero, or that
+				 * we received a success report caused by userspace.
+				 * We're expecting a report, so parse it.
+				 */
+				goto read_controller_duty;
+			return 0;
+		}
+read_controller_duty:
+		priv->duty_input[2] = data[RYUJIN_CONTROLLER_DUTY];
+
+		if (!completion_done(&priv->controller_duty_received))
+			complete_all(&priv->controller_duty_received);
+	}
+
+	return 0;
+}
+
+static int rog_ryujin_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	struct rog_ryujin_data *priv;
+	int ret;
+
+	priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->hdev = hdev;
+	hid_set_drvdata(hdev, priv);
+
+	/*
+	 * Initialize priv->updated to STATUS_VALIDITY seconds in the past, making
+	 * the initial empty data invalid for rog_ryujin_read() without the need for
+	 * a special case there.
+	 */
+	priv->updated = jiffies - msecs_to_jiffies(STATUS_VALIDITY);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "hid parse failed with %d\n", ret);
+		return ret;
+	}
+
+	/* Enable hidraw so existing user-space tools can continue to work */
+	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+	if (ret) {
+		hid_err(hdev, "hid hw start failed with %d\n", ret);
+		return ret;
+	}
+
+	ret = hid_hw_open(hdev);
+	if (ret) {
+		hid_err(hdev, "hid hw open failed with %d\n", ret);
+		goto fail_and_stop;
+	}
+
+	priv->buffer = devm_kzalloc(&hdev->dev, MAX_REPORT_LENGTH, GFP_KERNEL);
+	if (!priv->buffer) {
+		ret = -ENOMEM;
+		goto fail_and_close;
+	}
+
+	mutex_init(&priv->status_report_request_mutex);
+	mutex_init(&priv->buffer_lock);
+	spin_lock_init(&priv->status_report_request_lock);
+	init_completion(&priv->cooler_status_received);
+	init_completion(&priv->controller_status_received);
+	init_completion(&priv->cooler_duty_received);
+	init_completion(&priv->controller_duty_received);
+	init_completion(&priv->cooler_duty_set);
+	init_completion(&priv->controller_duty_set);
+
+	priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "rog_ryujin",
+							  priv, &rog_ryujin_chip_info, NULL);
+	if (IS_ERR(priv->hwmon_dev)) {
+		ret = PTR_ERR(priv->hwmon_dev);
+		hid_err(hdev, "hwmon registration failed with %d\n", ret);
+		goto fail_and_close;
+	}
+
+	return 0;
+
+fail_and_close:
+	hid_hw_close(hdev);
+fail_and_stop:
+	hid_hw_stop(hdev);
+	return ret;
+}
+
+static void rog_ryujin_remove(struct hid_device *hdev)
+{
+	struct rog_ryujin_data *priv = hid_get_drvdata(hdev);
+
+	hwmon_device_unregister(priv->hwmon_dev);
+
+	hid_hw_close(hdev);
+	hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id rog_ryujin_table[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS_ROG, USB_PRODUCT_ID_RYUJIN_AIO) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(hid, rog_ryujin_table);
+
+static struct hid_driver rog_ryujin_driver = {
+	.name = "rog_ryujin",
+	.id_table = rog_ryujin_table,
+	.probe = rog_ryujin_probe,
+	.remove = rog_ryujin_remove,
+	.raw_event = rog_ryujin_raw_event,
+};
+
+static int __init rog_ryujin_init(void)
+{
+	return hid_register_driver(&rog_ryujin_driver);
+}
+
+static void __exit rog_ryujin_exit(void)
+{
+	hid_unregister_driver(&rog_ryujin_driver);
+}
+
+/* When compiled into the kernel, initialize after the HID bus */
+late_initcall(rog_ryujin_init);
+module_exit(rog_ryujin_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Aleksa Savic <savicaleksa83@gmail.com>");
+MODULE_DESCRIPTION("Hwmon driver for Asus ROG Ryujin II 360 AIO cooler");