Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1370 insertions, 0 deletions

diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
new file mode 100644
index 0000000000..b30512a705
--- /dev/null
+++ b/drivers/hwmon/fschmd.c
@@ -0,0 +1,1370 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * fschmd.c
+ *
+ * Copyright (C) 2007 - 2009 Hans de Goede <hdegoede@redhat.com>
+ */
+
+/*
+ *  Merged Fujitsu Siemens hwmon driver, supporting the Poseidon, Hermes,
+ *  Scylla, Heracles, Heimdall, Hades and Syleus chips
+ *
+ *  Based on the original 2.4 fscscy, 2.6 fscpos, 2.6 fscher and 2.6
+ *  (candidate) fschmd drivers:
+ *  Copyright (C) 2006 Thilo Cestonaro
+ *			<thilo.cestonaro.external@fujitsu-siemens.com>
+ *  Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
+ *  Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
+ *  Copyright (c) 2001 Martin Knoblauch <mkn@teraport.de, knobi@knobisoft.de>
+ *  Copyright (C) 2000 Hermann Jung <hej@odn.de>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/dmi.h>
+#include <linux/fs.h>
+#include <linux/watchdog.h>
+#include <linux/miscdevice.h>
+#include <linux/uaccess.h>
+#include <linux/kref.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
+
+/* Insmod parameters */
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+enum chips { fscpos, fscher, fscscy, fschrc, fschmd, fschds, fscsyl };
+
+/*
+ * The FSCHMD registers and other defines
+ */
+
+/* chip identification */
+#define FSCHMD_REG_IDENT_0		0x00
+#define FSCHMD_REG_IDENT_1		0x01
+#define FSCHMD_REG_IDENT_2		0x02
+#define FSCHMD_REG_REVISION		0x03
+
+/* global control and status */
+#define FSCHMD_REG_EVENT_STATE		0x04
+#define FSCHMD_REG_CONTROL		0x05
+
+#define FSCHMD_CONTROL_ALERT_LED	0x01
+
+/* watchdog */
+static const u8 FSCHMD_REG_WDOG_CONTROL[7] = {
+	0x21, 0x21, 0x21, 0x21, 0x21, 0x28, 0x28 };
+static const u8 FSCHMD_REG_WDOG_STATE[7] = {
+	0x23, 0x23, 0x23, 0x23, 0x23, 0x29, 0x29 };
+static const u8 FSCHMD_REG_WDOG_PRESET[7] = {
+	0x28, 0x28, 0x28, 0x28, 0x28, 0x2a, 0x2a };
+
+#define FSCHMD_WDOG_CONTROL_TRIGGER	0x10
+#define FSCHMD_WDOG_CONTROL_STARTED	0x10 /* the same as trigger */
+#define FSCHMD_WDOG_CONTROL_STOP	0x20
+#define FSCHMD_WDOG_CONTROL_RESOLUTION	0x40
+
+#define FSCHMD_WDOG_STATE_CARDRESET	0x02
+
+/* voltages, weird order is to keep the same order as the old drivers */
+static const u8 FSCHMD_REG_VOLT[7][6] = {
+	{ 0x45, 0x42, 0x48 },				/* pos */
+	{ 0x45, 0x42, 0x48 },				/* her */
+	{ 0x45, 0x42, 0x48 },				/* scy */
+	{ 0x45, 0x42, 0x48 },				/* hrc */
+	{ 0x45, 0x42, 0x48 },				/* hmd */
+	{ 0x21, 0x20, 0x22 },				/* hds */
+	{ 0x21, 0x20, 0x22, 0x23, 0x24, 0x25 },		/* syl */
+};
+
+static const int FSCHMD_NO_VOLT_SENSORS[7] = { 3, 3, 3, 3, 3, 3, 6 };
+
+/*
+ * minimum pwm at which the fan is driven (pwm can be increased depending on
+ * the temp. Notice that for the scy some fans share there minimum speed.
+ * Also notice that with the scy the sensor order is different than with the
+ * other chips, this order was in the 2.4 driver and kept for consistency.
+ */
+static const u8 FSCHMD_REG_FAN_MIN[7][7] = {
+	{ 0x55, 0x65 },					/* pos */
+	{ 0x55, 0x65, 0xb5 },				/* her */
+	{ 0x65, 0x65, 0x55, 0xa5, 0x55, 0xa5 },		/* scy */
+	{ 0x55, 0x65, 0xa5, 0xb5 },			/* hrc */
+	{ 0x55, 0x65, 0xa5, 0xb5, 0xc5 },		/* hmd */
+	{ 0x55, 0x65, 0xa5, 0xb5, 0xc5 },		/* hds */
+	{ 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb4 },	/* syl */
+};
+
+/* actual fan speed */
+static const u8 FSCHMD_REG_FAN_ACT[7][7] = {
+	{ 0x0e, 0x6b, 0xab },				/* pos */
+	{ 0x0e, 0x6b, 0xbb },				/* her */
+	{ 0x6b, 0x6c, 0x0e, 0xab, 0x5c, 0xbb },		/* scy */
+	{ 0x0e, 0x6b, 0xab, 0xbb },			/* hrc */
+	{ 0x5b, 0x6b, 0xab, 0xbb, 0xcb },		/* hmd */
+	{ 0x5b, 0x6b, 0xab, 0xbb, 0xcb },		/* hds */
+	{ 0x57, 0x67, 0x77, 0x87, 0x97, 0xa7, 0xb7 },	/* syl */
+};
+
+/* fan status registers */
+static const u8 FSCHMD_REG_FAN_STATE[7][7] = {
+	{ 0x0d, 0x62, 0xa2 },				/* pos */
+	{ 0x0d, 0x62, 0xb2 },				/* her */
+	{ 0x62, 0x61, 0x0d, 0xa2, 0x52, 0xb2 },		/* scy */
+	{ 0x0d, 0x62, 0xa2, 0xb2 },			/* hrc */
+	{ 0x52, 0x62, 0xa2, 0xb2, 0xc2 },		/* hmd */
+	{ 0x52, 0x62, 0xa2, 0xb2, 0xc2 },		/* hds */
+	{ 0x50, 0x60, 0x70, 0x80, 0x90, 0xa0, 0xb0 },	/* syl */
+};
+
+/* fan ripple / divider registers */
+static const u8 FSCHMD_REG_FAN_RIPPLE[7][7] = {
+	{ 0x0f, 0x6f, 0xaf },				/* pos */
+	{ 0x0f, 0x6f, 0xbf },				/* her */
+	{ 0x6f, 0x6f, 0x0f, 0xaf, 0x0f, 0xbf },		/* scy */
+	{ 0x0f, 0x6f, 0xaf, 0xbf },			/* hrc */
+	{ 0x5f, 0x6f, 0xaf, 0xbf, 0xcf },		/* hmd */
+	{ 0x5f, 0x6f, 0xaf, 0xbf, 0xcf },		/* hds */
+	{ 0x56, 0x66, 0x76, 0x86, 0x96, 0xa6, 0xb6 },	/* syl */
+};
+
+static const int FSCHMD_NO_FAN_SENSORS[7] = { 3, 3, 6, 4, 5, 5, 7 };
+
+/* Fan status register bitmasks */
+#define FSCHMD_FAN_ALARM	0x04 /* called fault by FSC! */
+#define FSCHMD_FAN_NOT_PRESENT	0x08
+#define FSCHMD_FAN_DISABLED	0x80
+
+
+/* actual temperature registers */
+static const u8 FSCHMD_REG_TEMP_ACT[7][11] = {
+	{ 0x64, 0x32, 0x35 },				/* pos */
+	{ 0x64, 0x32, 0x35 },				/* her */
+	{ 0x64, 0xD0, 0x32, 0x35 },			/* scy */
+	{ 0x64, 0x32, 0x35 },				/* hrc */
+	{ 0x70, 0x80, 0x90, 0xd0, 0xe0 },		/* hmd */
+	{ 0x70, 0x80, 0x90, 0xd0, 0xe0 },		/* hds */
+	{ 0x58, 0x68, 0x78, 0x88, 0x98, 0xa8,		/* syl */
+	  0xb8, 0xc8, 0xd8, 0xe8, 0xf8 },
+};
+
+/* temperature state registers */
+static const u8 FSCHMD_REG_TEMP_STATE[7][11] = {
+	{ 0x71, 0x81, 0x91 },				/* pos */
+	{ 0x71, 0x81, 0x91 },				/* her */
+	{ 0x71, 0xd1, 0x81, 0x91 },			/* scy */
+	{ 0x71, 0x81, 0x91 },				/* hrc */
+	{ 0x71, 0x81, 0x91, 0xd1, 0xe1 },		/* hmd */
+	{ 0x71, 0x81, 0x91, 0xd1, 0xe1 },		/* hds */
+	{ 0x59, 0x69, 0x79, 0x89, 0x99, 0xa9,		/* syl */
+	  0xb9, 0xc9, 0xd9, 0xe9, 0xf9 },
+};
+
+/*
+ * temperature high limit registers, FSC does not document these. Proven to be
+ * there with field testing on the fscher and fschrc, already supported / used
+ * in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers
+ * at these addresses, but doesn't want to confirm they are the same as with
+ * the fscher??
+ */
+static const u8 FSCHMD_REG_TEMP_LIMIT[7][11] = {
+	{ 0, 0, 0 },					/* pos */
+	{ 0x76, 0x86, 0x96 },				/* her */
+	{ 0x76, 0xd6, 0x86, 0x96 },			/* scy */
+	{ 0x76, 0x86, 0x96 },				/* hrc */
+	{ 0x76, 0x86, 0x96, 0xd6, 0xe6 },		/* hmd */
+	{ 0x76, 0x86, 0x96, 0xd6, 0xe6 },		/* hds */
+	{ 0x5a, 0x6a, 0x7a, 0x8a, 0x9a, 0xaa,		/* syl */
+	  0xba, 0xca, 0xda, 0xea, 0xfa },
+};
+
+/*
+ * These were found through experimenting with an fscher, currently they are
+ * not used, but we keep them around for future reference.
+ * On the fscsyl AUTOP1 lives at 0x#c (so 0x5c for fan1, 0x6c for fan2, etc),
+ * AUTOP2 lives at 0x#e, and 0x#1 is a bitmask defining which temps influence
+ * the fan speed.
+ * static const u8 FSCHER_REG_TEMP_AUTOP1[] =	{ 0x73, 0x83, 0x93 };
+ * static const u8 FSCHER_REG_TEMP_AUTOP2[] =	{ 0x75, 0x85, 0x95 };
+ */
+
+static const int FSCHMD_NO_TEMP_SENSORS[7] = { 3, 3, 4, 3, 5, 5, 11 };
+
+/* temp status register bitmasks */
+#define FSCHMD_TEMP_WORKING	0x01
+#define FSCHMD_TEMP_ALERT	0x02
+#define FSCHMD_TEMP_DISABLED	0x80
+/* there only really is an alarm if the sensor is working and alert == 1 */
+#define FSCHMD_TEMP_ALARM_MASK \
+	(FSCHMD_TEMP_WORKING | FSCHMD_TEMP_ALERT)
+
+/*
+ * Functions declarations
+ */
+
+static int fschmd_probe(struct i2c_client *client);
+static int fschmd_detect(struct i2c_client *client,
+			 struct i2c_board_info *info);
+static void fschmd_remove(struct i2c_client *client);
+static struct fschmd_data *fschmd_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static const struct i2c_device_id fschmd_id[] = {
+	{ "fscpos", fscpos },
+	{ "fscher", fscher },
+	{ "fscscy", fscscy },
+	{ "fschrc", fschrc },
+	{ "fschmd", fschmd },
+	{ "fschds", fschds },
+	{ "fscsyl", fscsyl },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, fschmd_id);
+
+static struct i2c_driver fschmd_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "fschmd",
+	},
+	.probe		= fschmd_probe,
+	.remove		= fschmd_remove,
+	.id_table	= fschmd_id,
+	.detect		= fschmd_detect,
+	.address_list	= normal_i2c,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct fschmd_data {
+	struct i2c_client *client;
+	struct device *hwmon_dev;
+	struct mutex update_lock;
+	struct mutex watchdog_lock;
+	struct list_head list; /* member of the watchdog_data_list */
+	struct kref kref;
+	struct miscdevice watchdog_miscdev;
+	enum chips kind;
+	unsigned long watchdog_is_open;
+	char watchdog_expect_close;
+	char watchdog_name[10]; /* must be unique to avoid sysfs conflict */
+	bool valid; /* false until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* register values */
+	u8 revision;            /* chip revision */
+	u8 global_control;	/* global control register */
+	u8 watchdog_control;    /* watchdog control register */
+	u8 watchdog_state;      /* watchdog status register */
+	u8 watchdog_preset;     /* watchdog counter preset on trigger val */
+	u8 volt[6];		/* voltage */
+	u8 temp_act[11];	/* temperature */
+	u8 temp_status[11];	/* status of sensor */
+	u8 temp_max[11];	/* high temp limit, notice: undocumented! */
+	u8 fan_act[7];		/* fans revolutions per second */
+	u8 fan_status[7];	/* fan status */
+	u8 fan_min[7];		/* fan min value for rps */
+	u8 fan_ripple[7];	/* divider for rps */
+};
+
+/*
+ * Global variables to hold information read from special DMI tables, which are
+ * available on FSC machines with an fscher or later chip. There is no need to
+ * protect these with a lock as they are only modified from our attach function
+ * which always gets called with the i2c-core lock held and never accessed
+ * before the attach function is done with them.
+ */
+static int dmi_mult[6] = { 490, 200, 100, 100, 200, 100 };
+static int dmi_offset[6] = { 0, 0, 0, 0, 0, 0 };
+static int dmi_vref = -1;
+
+/*
+ * Somewhat ugly :( global data pointer list with all fschmd devices, so that
+ * we can find our device data as when using misc_register there is no other
+ * method to get to ones device data from the open fop.
+ */
+static LIST_HEAD(watchdog_data_list);
+/* Note this lock not only protect list access, but also data.kref access */
+static DEFINE_MUTEX(watchdog_data_mutex);
+
+/*
+ * Release our data struct when we're detached from the i2c client *and* all
+ * references to our watchdog device are released
+ */
+static void fschmd_release_resources(struct kref *ref)
+{
+	struct fschmd_data *data = container_of(ref, struct fschmd_data, kref);
+	kfree(data);
+}
+
+/*
+ * Sysfs attr show / store functions
+ */
+
+static ssize_t in_value_show(struct device *dev,
+			     struct device_attribute *devattr, char *buf)
+{
+	const int max_reading[3] = { 14200, 6600, 3300 };
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = fschmd_update_device(dev);
+
+	if (data->kind == fscher || data->kind >= fschrc)
+		return sprintf(buf, "%d\n", (data->volt[index] * dmi_vref *
+			dmi_mult[index]) / 255 + dmi_offset[index]);
+	else
+		return sprintf(buf, "%d\n", (data->volt[index] *
+			max_reading[index] + 128) / 255);
+}
+
+
+#define TEMP_FROM_REG(val)	(((val) - 128) * 1000)
+
+static ssize_t temp_value_show(struct device *dev,
+			       struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = fschmd_update_device(dev);
+
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[index]));
+}
+
+static ssize_t temp_max_show(struct device *dev,
+			     struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = fschmd_update_device(dev);
+
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index]));
+}
+
+static ssize_t temp_max_store(struct device *dev,
+			      struct device_attribute *devattr,
+			      const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = dev_get_drvdata(dev);
+	long v;
+	int err;
+
+	err = kstrtol(buf, 10, &v);
+	if (err)
+		return err;
+
+	v = clamp_val(v / 1000, -128, 127) + 128;
+
+	mutex_lock(&data->update_lock);
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		FSCHMD_REG_TEMP_LIMIT[data->kind][index], v);
+	data->temp_max[index] = v;
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t temp_fault_show(struct device *dev,
+			       struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = fschmd_update_device(dev);
+
+	/* bit 0 set means sensor working ok, so no fault! */
+	if (data->temp_status[index] & FSCHMD_TEMP_WORKING)
+		return sprintf(buf, "0\n");
+	else
+		return sprintf(buf, "1\n");
+}
+
+static ssize_t temp_alarm_show(struct device *dev,
+			       struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = fschmd_update_device(dev);
+
+	if ((data->temp_status[index] & FSCHMD_TEMP_ALARM_MASK) ==
+			FSCHMD_TEMP_ALARM_MASK)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+
+#define RPM_FROM_REG(val)	((val) * 60)
+
+static ssize_t fan_value_show(struct device *dev,
+			      struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = fschmd_update_device(dev);
+
+	return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[index]));
+}
+
+static ssize_t fan_div_show(struct device *dev,
+			    struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = fschmd_update_device(dev);
+
+	/* bits 2..7 reserved => mask with 3 */
+	return sprintf(buf, "%d\n", 1 << (data->fan_ripple[index] & 3));
+}
+
+static ssize_t fan_div_store(struct device *dev,
+			     struct device_attribute *devattr,
+			     const char *buf, size_t count)
+{
+	u8 reg;
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = dev_get_drvdata(dev);
+	/* supported values: 2, 4, 8 */
+	unsigned long v;
+	int err;
+
+	err = kstrtoul(buf, 10, &v);
+	if (err)
+		return err;
+
+	switch (v) {
+	case 2:
+		v = 1;
+		break;
+	case 4:
+		v = 2;
+		break;
+	case 8:
+		v = 3;
+		break;
+	default:
+		dev_err(dev,
+			"fan_div value %lu not supported. Choose one of 2, 4 or 8!\n",
+			v);
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->update_lock);
+
+	reg = i2c_smbus_read_byte_data(to_i2c_client(dev),
+		FSCHMD_REG_FAN_RIPPLE[data->kind][index]);
+
+	/* bits 2..7 reserved => mask with 0x03 */
+	reg &= ~0x03;
+	reg |= v;
+
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg);
+
+	data->fan_ripple[index] = reg;
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t fan_alarm_show(struct device *dev,
+			      struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = fschmd_update_device(dev);
+
+	if (data->fan_status[index] & FSCHMD_FAN_ALARM)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+static ssize_t fan_fault_show(struct device *dev,
+			      struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = fschmd_update_device(dev);
+
+	if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+
+static ssize_t pwm_auto_point1_pwm_show(struct device *dev,
+					struct device_attribute *devattr,
+					char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = fschmd_update_device(dev);
+	int val = data->fan_min[index];
+
+	/* 0 = allow turning off (except on the syl), 1-255 = 50-100% */
+	if (val || data->kind == fscsyl)
+		val = val / 2 + 128;
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t pwm_auto_point1_pwm_store(struct device *dev,
+					 struct device_attribute *devattr,
+					 const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct fschmd_data *data = dev_get_drvdata(dev);
+	unsigned long v;
+	int err;
+
+	err = kstrtoul(buf, 10, &v);
+	if (err)
+		return err;
+
+	/* reg: 0 = allow turning off (except on the syl), 1-255 = 50-100% */
+	if (v || data->kind == fscsyl) {
+		v = clamp_val(v, 128, 255);
+		v = (v - 128) * 2 + 1;
+	}
+
+	mutex_lock(&data->update_lock);
+
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		FSCHMD_REG_FAN_MIN[data->kind][index], v);
+	data->fan_min[index] = v;
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+
+/*
+ * The FSC hwmon family has the ability to force an attached alert led to flash
+ * from software, we export this as an alert_led sysfs attr
+ */
+static ssize_t alert_led_show(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	struct fschmd_data *data = fschmd_update_device(dev);
+
+	if (data->global_control & FSCHMD_CONTROL_ALERT_LED)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+static ssize_t alert_led_store(struct device *dev,
+	struct device_attribute *devattr, const char *buf, size_t count)
+{
+	u8 reg;
+	struct fschmd_data *data = dev_get_drvdata(dev);
+	unsigned long v;
+	int err;
+
+	err = kstrtoul(buf, 10, &v);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+
+	reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL);
+
+	if (v)
+		reg |= FSCHMD_CONTROL_ALERT_LED;
+	else
+		reg &= ~FSCHMD_CONTROL_ALERT_LED;
+
+	i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg);
+
+	data->global_control = reg;
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(alert_led);
+
+static struct sensor_device_attribute fschmd_attr[] = {
+	SENSOR_ATTR_RO(in0_input, in_value, 0),
+	SENSOR_ATTR_RO(in1_input, in_value, 1),
+	SENSOR_ATTR_RO(in2_input, in_value, 2),
+	SENSOR_ATTR_RO(in3_input, in_value, 3),
+	SENSOR_ATTR_RO(in4_input, in_value, 4),
+	SENSOR_ATTR_RO(in5_input, in_value, 5),
+};
+
+static struct sensor_device_attribute fschmd_temp_attr[] = {
+	SENSOR_ATTR_RO(temp1_input, temp_value, 0),
+	SENSOR_ATTR_RW(temp1_max, temp_max, 0),
+	SENSOR_ATTR_RO(temp1_fault, temp_fault, 0),
+	SENSOR_ATTR_RO(temp1_alarm, temp_alarm, 0),
+	SENSOR_ATTR_RO(temp2_input, temp_value, 1),
+	SENSOR_ATTR_RW(temp2_max, temp_max, 1),
+	SENSOR_ATTR_RO(temp2_fault, temp_fault, 1),
+	SENSOR_ATTR_RO(temp2_alarm, temp_alarm, 1),
+	SENSOR_ATTR_RO(temp3_input, temp_value, 2),
+	SENSOR_ATTR_RW(temp3_max, temp_max, 2),
+	SENSOR_ATTR_RO(temp3_fault, temp_fault, 2),
+	SENSOR_ATTR_RO(temp3_alarm, temp_alarm, 2),
+	SENSOR_ATTR_RO(temp4_input, temp_value, 3),
+	SENSOR_ATTR_RW(temp4_max, temp_max, 3),
+	SENSOR_ATTR_RO(temp4_fault, temp_fault, 3),
+	SENSOR_ATTR_RO(temp4_alarm, temp_alarm, 3),
+	SENSOR_ATTR_RO(temp5_input, temp_value, 4),
+	SENSOR_ATTR_RW(temp5_max, temp_max, 4),
+	SENSOR_ATTR_RO(temp5_fault, temp_fault, 4),
+	SENSOR_ATTR_RO(temp5_alarm, temp_alarm, 4),
+	SENSOR_ATTR_RO(temp6_input, temp_value, 5),
+	SENSOR_ATTR_RW(temp6_max, temp_max, 5),
+	SENSOR_ATTR_RO(temp6_fault, temp_fault, 5),
+	SENSOR_ATTR_RO(temp6_alarm, temp_alarm, 5),
+	SENSOR_ATTR_RO(temp7_input, temp_value, 6),
+	SENSOR_ATTR_RW(temp7_max, temp_max, 6),
+	SENSOR_ATTR_RO(temp7_fault, temp_fault, 6),
+	SENSOR_ATTR_RO(temp7_alarm, temp_alarm, 6),
+	SENSOR_ATTR_RO(temp8_input, temp_value, 7),
+	SENSOR_ATTR_RW(temp8_max, temp_max, 7),
+	SENSOR_ATTR_RO(temp8_fault, temp_fault, 7),
+	SENSOR_ATTR_RO(temp8_alarm, temp_alarm, 7),
+	SENSOR_ATTR_RO(temp9_input, temp_value, 8),
+	SENSOR_ATTR_RW(temp9_max, temp_max, 8),
+	SENSOR_ATTR_RO(temp9_fault, temp_fault, 8),
+	SENSOR_ATTR_RO(temp9_alarm, temp_alarm, 8),
+	SENSOR_ATTR_RO(temp10_input, temp_value, 9),
+	SENSOR_ATTR_RW(temp10_max, temp_max, 9),
+	SENSOR_ATTR_RO(temp10_fault, temp_fault, 9),
+	SENSOR_ATTR_RO(temp10_alarm, temp_alarm, 9),
+	SENSOR_ATTR_RO(temp11_input, temp_value, 10),
+	SENSOR_ATTR_RW(temp11_max, temp_max, 10),
+	SENSOR_ATTR_RO(temp11_fault, temp_fault, 10),
+	SENSOR_ATTR_RO(temp11_alarm, temp_alarm, 10),
+};
+
+static struct sensor_device_attribute fschmd_fan_attr[] = {
+	SENSOR_ATTR_RO(fan1_input, fan_value, 0),
+	SENSOR_ATTR_RW(fan1_div, fan_div, 0),
+	SENSOR_ATTR_RO(fan1_alarm, fan_alarm, 0),
+	SENSOR_ATTR_RO(fan1_fault, fan_fault, 0),
+	SENSOR_ATTR_RW(pwm1_auto_point1_pwm, pwm_auto_point1_pwm, 0),
+	SENSOR_ATTR_RO(fan2_input, fan_value, 1),
+	SENSOR_ATTR_RW(fan2_div, fan_div, 1),
+	SENSOR_ATTR_RO(fan2_alarm, fan_alarm, 1),
+	SENSOR_ATTR_RO(fan2_fault, fan_fault, 1),
+	SENSOR_ATTR_RW(pwm2_auto_point1_pwm, pwm_auto_point1_pwm, 1),
+	SENSOR_ATTR_RO(fan3_input, fan_value, 2),
+	SENSOR_ATTR_RW(fan3_div, fan_div, 2),
+	SENSOR_ATTR_RO(fan3_alarm, fan_alarm, 2),
+	SENSOR_ATTR_RO(fan3_fault, fan_fault, 2),
+	SENSOR_ATTR_RW(pwm3_auto_point1_pwm, pwm_auto_point1_pwm, 2),
+	SENSOR_ATTR_RO(fan4_input, fan_value, 3),
+	SENSOR_ATTR_RW(fan4_div, fan_div, 3),
+	SENSOR_ATTR_RO(fan4_alarm, fan_alarm, 3),
+	SENSOR_ATTR_RO(fan4_fault, fan_fault, 3),
+	SENSOR_ATTR_RW(pwm4_auto_point1_pwm, pwm_auto_point1_pwm, 3),
+	SENSOR_ATTR_RO(fan5_input, fan_value, 4),
+	SENSOR_ATTR_RW(fan5_div, fan_div, 4),
+	SENSOR_ATTR_RO(fan5_alarm, fan_alarm, 4),
+	SENSOR_ATTR_RO(fan5_fault, fan_fault, 4),
+	SENSOR_ATTR_RW(pwm5_auto_point1_pwm, pwm_auto_point1_pwm, 4),
+	SENSOR_ATTR_RO(fan6_input, fan_value, 5),
+	SENSOR_ATTR_RW(fan6_div, fan_div, 5),
+	SENSOR_ATTR_RO(fan6_alarm, fan_alarm, 5),
+	SENSOR_ATTR_RO(fan6_fault, fan_fault, 5),
+	SENSOR_ATTR_RW(pwm6_auto_point1_pwm, pwm_auto_point1_pwm, 5),
+	SENSOR_ATTR_RO(fan7_input, fan_value, 6),
+	SENSOR_ATTR_RW(fan7_div, fan_div, 6),
+	SENSOR_ATTR_RO(fan7_alarm, fan_alarm, 6),
+	SENSOR_ATTR_RO(fan7_fault, fan_fault, 6),
+	SENSOR_ATTR_RW(pwm7_auto_point1_pwm, pwm_auto_point1_pwm, 6),
+};
+
+
+/*
+ * Watchdog routines
+ */
+
+static int watchdog_set_timeout(struct fschmd_data *data, int timeout)
+{
+	int ret, resolution;
+	int kind = data->kind + 1; /* 0-x array index -> 1-x module param */
+
+	/* 2 second or 60 second resolution? */
+	if (timeout <= 510 || kind == fscpos || kind == fscscy)
+		resolution = 2;
+	else
+		resolution = 60;
+
+	if (timeout < resolution || timeout > (resolution * 255))
+		return -EINVAL;
+
+	mutex_lock(&data->watchdog_lock);
+	if (!data->client) {
+		ret = -ENODEV;
+		goto leave;
+	}
+
+	if (resolution == 2)
+		data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_RESOLUTION;
+	else
+		data->watchdog_control |= FSCHMD_WDOG_CONTROL_RESOLUTION;
+
+	data->watchdog_preset = DIV_ROUND_UP(timeout, resolution);
+
+	/* Write new timeout value */
+	i2c_smbus_write_byte_data(data->client,
+		FSCHMD_REG_WDOG_PRESET[data->kind], data->watchdog_preset);
+	/* Write new control register, do not trigger! */
+	i2c_smbus_write_byte_data(data->client,
+		FSCHMD_REG_WDOG_CONTROL[data->kind],
+		data->watchdog_control & ~FSCHMD_WDOG_CONTROL_TRIGGER);
+
+	ret = data->watchdog_preset * resolution;
+
+leave:
+	mutex_unlock(&data->watchdog_lock);
+	return ret;
+}
+
+static int watchdog_get_timeout(struct fschmd_data *data)
+{
+	int timeout;
+
+	mutex_lock(&data->watchdog_lock);
+	if (data->watchdog_control & FSCHMD_WDOG_CONTROL_RESOLUTION)
+		timeout = data->watchdog_preset * 60;
+	else
+		timeout = data->watchdog_preset * 2;
+	mutex_unlock(&data->watchdog_lock);
+
+	return timeout;
+}
+
+static int watchdog_trigger(struct fschmd_data *data)
+{
+	int ret = 0;
+
+	mutex_lock(&data->watchdog_lock);
+	if (!data->client) {
+		ret = -ENODEV;
+		goto leave;
+	}
+
+	data->watchdog_control |= FSCHMD_WDOG_CONTROL_TRIGGER;
+	i2c_smbus_write_byte_data(data->client,
+				  FSCHMD_REG_WDOG_CONTROL[data->kind],
+				  data->watchdog_control);
+leave:
+	mutex_unlock(&data->watchdog_lock);
+	return ret;
+}
+
+static int watchdog_stop(struct fschmd_data *data)
+{
+	int ret = 0;
+
+	mutex_lock(&data->watchdog_lock);
+	if (!data->client) {
+		ret = -ENODEV;
+		goto leave;
+	}
+
+	data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_STARTED;
+	/*
+	 * Don't store the stop flag in our watchdog control register copy, as
+	 * its a write only bit (read always returns 0)
+	 */
+	i2c_smbus_write_byte_data(data->client,
+		FSCHMD_REG_WDOG_CONTROL[data->kind],
+		data->watchdog_control | FSCHMD_WDOG_CONTROL_STOP);
+leave:
+	mutex_unlock(&data->watchdog_lock);
+	return ret;
+}
+
+static int watchdog_open(struct inode *inode, struct file *filp)
+{
+	struct fschmd_data *pos, *data = NULL;
+	int watchdog_is_open;
+
+	/*
+	 * We get called from drivers/char/misc.c with misc_mtx hold, and we
+	 * call misc_register() from fschmd_probe() with watchdog_data_mutex
+	 * hold, as misc_register() takes the misc_mtx lock, this is a possible
+	 * deadlock, so we use mutex_trylock here.
+	 */
+	if (!mutex_trylock(&watchdog_data_mutex))
+		return -ERESTARTSYS;
+	list_for_each_entry(pos, &watchdog_data_list, list) {
+		if (pos->watchdog_miscdev.minor == iminor(inode)) {
+			data = pos;
+			break;
+		}
+	}
+	/* Note we can never not have found data, so we don't check for this */
+	watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open);
+	if (!watchdog_is_open)
+		kref_get(&data->kref);
+	mutex_unlock(&watchdog_data_mutex);
+
+	if (watchdog_is_open)
+		return -EBUSY;
+
+	/* Start the watchdog */
+	watchdog_trigger(data);
+	filp->private_data = data;
+
+	return stream_open(inode, filp);
+}
+
+static int watchdog_release(struct inode *inode, struct file *filp)
+{
+	struct fschmd_data *data = filp->private_data;
+
+	if (data->watchdog_expect_close) {
+		watchdog_stop(data);
+		data->watchdog_expect_close = 0;
+	} else {
+		watchdog_trigger(data);
+		dev_crit(&data->client->dev,
+			"unexpected close, not stopping watchdog!\n");
+	}
+
+	clear_bit(0, &data->watchdog_is_open);
+
+	mutex_lock(&watchdog_data_mutex);
+	kref_put(&data->kref, fschmd_release_resources);
+	mutex_unlock(&watchdog_data_mutex);
+
+	return 0;
+}
+
+static ssize_t watchdog_write(struct file *filp, const char __user *buf,
+	size_t count, loff_t *offset)
+{
+	int ret;
+	struct fschmd_data *data = filp->private_data;
+
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* Clear it in case it was set with a previous write */
+			data->watchdog_expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					data->watchdog_expect_close = 1;
+			}
+		}
+		ret = watchdog_trigger(data);
+		if (ret < 0)
+			return ret;
+	}
+	return count;
+}
+
+static long watchdog_ioctl(struct file *filp, unsigned int cmd,
+			   unsigned long arg)
+{
+	struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+				WDIOF_CARDRESET,
+		.identity = "FSC watchdog"
+	};
+	int i, ret = 0;
+	struct fschmd_data *data = filp->private_data;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ident.firmware_version = data->revision;
+		if (!nowayout)
+			ident.options |= WDIOF_MAGICCLOSE;
+		if (copy_to_user((void __user *)arg, &ident, sizeof(ident)))
+			ret = -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, (int __user *)arg);
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		if (data->watchdog_state & FSCHMD_WDOG_STATE_CARDRESET)
+			ret = put_user(WDIOF_CARDRESET, (int __user *)arg);
+		else
+			ret = put_user(0, (int __user *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		ret = watchdog_trigger(data);
+		break;
+
+	case WDIOC_GETTIMEOUT:
+		i = watchdog_get_timeout(data);
+		ret = put_user(i, (int __user *)arg);
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(i, (int __user *)arg)) {
+			ret = -EFAULT;
+			break;
+		}
+		ret = watchdog_set_timeout(data, i);
+		if (ret > 0)
+			ret = put_user(ret, (int __user *)arg);
+		break;
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(i, (int __user *)arg)) {
+			ret = -EFAULT;
+			break;
+		}
+
+		if (i & WDIOS_DISABLECARD)
+			ret = watchdog_stop(data);
+		else if (i & WDIOS_ENABLECARD)
+			ret = watchdog_trigger(data);
+		else
+			ret = -EINVAL;
+
+		break;
+	default:
+		ret = -ENOTTY;
+	}
+	return ret;
+}
+
+static const struct file_operations watchdog_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.open = watchdog_open,
+	.release = watchdog_release,
+	.write = watchdog_write,
+	.unlocked_ioctl = watchdog_ioctl,
+	.compat_ioctl = compat_ptr_ioctl,
+};
+
+
+/*
+ * Detect, register, unregister and update device functions
+ */
+
+/*
+ * DMI decode routine to read voltage scaling factors from special DMI tables,
+ * which are available on FSC machines with an fscher or later chip.
+ */
+static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy)
+{
+	int i, mult[3] = { 0 }, offset[3] = { 0 }, vref = 0, found = 0;
+
+	/*
+	 * dmi code ugliness, we get passed the address of the contents of
+	 * a complete DMI record, but in the form of a dmi_header pointer, in
+	 * reality this address holds header->length bytes of which the header
+	 * are the first 4 bytes
+	 */
+	u8 *dmi_data = (u8 *)header;
+
+	/* We are looking for OEM-specific type 185 */
+	if (header->type != 185)
+		return;
+
+	/*
+	 * we are looking for what Siemens calls "subtype" 19, the subtype
+	 * is stored in byte 5 of the dmi block
+	 */
+	if (header->length < 5 || dmi_data[4] != 19)
+		return;
+
+	/*
+	 * After the subtype comes 1 unknown byte and then blocks of 5 bytes,
+	 * consisting of what Siemens calls an "Entity" number, followed by
+	 * 2 16-bit words in LSB first order
+	 */
+	for (i = 6; (i + 4) < header->length; i += 5) {
+		/* entity 1 - 3: voltage multiplier and offset */
+		if (dmi_data[i] >= 1 && dmi_data[i] <= 3) {
+			/* Our in sensors order and the DMI order differ */
+			const int shuffle[3] = { 1, 0, 2 };
+			int in = shuffle[dmi_data[i] - 1];
+
+			/* Check for twice the same entity */
+			if (found & (1 << in))
+				return;
+
+			mult[in] = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
+			offset[in] = dmi_data[i + 3] | (dmi_data[i + 4] << 8);
+
+			found |= 1 << in;
+		}
+
+		/* entity 7: reference voltage */
+		if (dmi_data[i] == 7) {
+			/* Check for twice the same entity */
+			if (found & 0x08)
+				return;
+
+			vref = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
+
+			found |= 0x08;
+		}
+	}
+
+	if (found == 0x0F) {
+		for (i = 0; i < 3; i++) {
+			dmi_mult[i] = mult[i] * 10;
+			dmi_offset[i] = offset[i] * 10;
+		}
+		/*
+		 * According to the docs there should be separate dmi entries
+		 * for the mult's and offsets of in3-5 of the syl, but on
+		 * my test machine these are not present
+		 */
+		dmi_mult[3] = dmi_mult[2];
+		dmi_mult[4] = dmi_mult[1];
+		dmi_mult[5] = dmi_mult[2];
+		dmi_offset[3] = dmi_offset[2];
+		dmi_offset[4] = dmi_offset[1];
+		dmi_offset[5] = dmi_offset[2];
+		dmi_vref = vref;
+	}
+}
+
+static int fschmd_detect(struct i2c_client *client,
+			 struct i2c_board_info *info)
+{
+	enum chips kind;
+	struct i2c_adapter *adapter = client->adapter;
+	char id[4];
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	/* Detect & Identify the chip */
+	id[0] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_0);
+	id[1] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_1);
+	id[2] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_2);
+	id[3] = '\0';
+
+	if (!strcmp(id, "PEG"))
+		kind = fscpos;
+	else if (!strcmp(id, "HER"))
+		kind = fscher;
+	else if (!strcmp(id, "SCY"))
+		kind = fscscy;
+	else if (!strcmp(id, "HRC"))
+		kind = fschrc;
+	else if (!strcmp(id, "HMD"))
+		kind = fschmd;
+	else if (!strcmp(id, "HDS"))
+		kind = fschds;
+	else if (!strcmp(id, "SYL"))
+		kind = fscsyl;
+	else
+		return -ENODEV;
+
+	strscpy(info->type, fschmd_id[kind].name, I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int fschmd_probe(struct i2c_client *client)
+{
+	struct fschmd_data *data;
+	static const char * const names[7] = { "Poseidon", "Hermes", "Scylla",
+				"Heracles", "Heimdall", "Hades", "Syleus" };
+	static const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 };
+	int i, err;
+	enum chips kind = i2c_match_id(fschmd_id, client)->driver_data;
+
+	data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+	mutex_init(&data->watchdog_lock);
+	INIT_LIST_HEAD(&data->list);
+	kref_init(&data->kref);
+	/*
+	 * Store client pointer in our data struct for watchdog usage
+	 * (where the client is found through a data ptr instead of the
+	 * otherway around)
+	 */
+	data->client = client;
+	data->kind = kind;
+
+	if (kind == fscpos) {
+		/*
+		 * The Poseidon has hardwired temp limits, fill these
+		 * in for the alarm resetting code
+		 */
+		data->temp_max[0] = 70 + 128;
+		data->temp_max[1] = 50 + 128;
+		data->temp_max[2] = 50 + 128;
+	}
+
+	/* Read the special DMI table for fscher and newer chips */
+	if ((kind == fscher || kind >= fschrc) && dmi_vref == -1) {
+		dmi_walk(fschmd_dmi_decode, NULL);
+		if (dmi_vref == -1) {
+			dev_warn(&client->dev,
+				"Couldn't get voltage scaling factors from "
+				"BIOS DMI table, using builtin defaults\n");
+			dmi_vref = 33;
+		}
+	}
+
+	/* Read in some never changing registers */
+	data->revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION);
+	data->global_control = i2c_smbus_read_byte_data(client,
+					FSCHMD_REG_CONTROL);
+	data->watchdog_control = i2c_smbus_read_byte_data(client,
+					FSCHMD_REG_WDOG_CONTROL[data->kind]);
+	data->watchdog_state = i2c_smbus_read_byte_data(client,
+					FSCHMD_REG_WDOG_STATE[data->kind]);
+	data->watchdog_preset = i2c_smbus_read_byte_data(client,
+					FSCHMD_REG_WDOG_PRESET[data->kind]);
+
+	err = device_create_file(&client->dev, &dev_attr_alert_led);
+	if (err)
+		goto exit_detach;
+
+	for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++) {
+		err = device_create_file(&client->dev,
+					&fschmd_attr[i].dev_attr);
+		if (err)
+			goto exit_detach;
+	}
+
+	for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) {
+		/* Poseidon doesn't have TEMP_LIMIT registers */
+		if (kind == fscpos && fschmd_temp_attr[i].dev_attr.show ==
+				temp_max_show)
+			continue;
+
+		if (kind == fscsyl) {
+			if (i % 4 == 0)
+				data->temp_status[i / 4] =
+					i2c_smbus_read_byte_data(client,
+						FSCHMD_REG_TEMP_STATE
+						[data->kind][i / 4]);
+			if (data->temp_status[i / 4] & FSCHMD_TEMP_DISABLED)
+				continue;
+		}
+
+		err = device_create_file(&client->dev,
+					&fschmd_temp_attr[i].dev_attr);
+		if (err)
+			goto exit_detach;
+	}
+
+	for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) {
+		/* Poseidon doesn't have a FAN_MIN register for its 3rd fan */
+		if (kind == fscpos &&
+				!strcmp(fschmd_fan_attr[i].dev_attr.attr.name,
+					"pwm3_auto_point1_pwm"))
+			continue;
+
+		if (kind == fscsyl) {
+			if (i % 5 == 0)
+				data->fan_status[i / 5] =
+					i2c_smbus_read_byte_data(client,
+						FSCHMD_REG_FAN_STATE
+						[data->kind][i / 5]);
+			if (data->fan_status[i / 5] & FSCHMD_FAN_DISABLED)
+				continue;
+		}
+
+		err = device_create_file(&client->dev,
+					&fschmd_fan_attr[i].dev_attr);
+		if (err)
+			goto exit_detach;
+	}
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		data->hwmon_dev = NULL;
+		goto exit_detach;
+	}
+
+	/*
+	 * We take the data_mutex lock early so that watchdog_open() cannot
+	 * run when misc_register() has completed, but we've not yet added
+	 * our data to the watchdog_data_list (and set the default timeout)
+	 */
+	mutex_lock(&watchdog_data_mutex);
+	for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) {
+		/* Register our watchdog part */
+		snprintf(data->watchdog_name, sizeof(data->watchdog_name),
+			"watchdog%c", (i == 0) ? '\0' : ('0' + i));
+		data->watchdog_miscdev.name = data->watchdog_name;
+		data->watchdog_miscdev.fops = &watchdog_fops;
+		data->watchdog_miscdev.minor = watchdog_minors[i];
+		err = misc_register(&data->watchdog_miscdev);
+		if (err == -EBUSY)
+			continue;
+		if (err) {
+			data->watchdog_miscdev.minor = 0;
+			dev_err(&client->dev,
+				"Registering watchdog chardev: %d\n", err);
+			break;
+		}
+
+		list_add(&data->list, &watchdog_data_list);
+		watchdog_set_timeout(data, 60);
+		dev_info(&client->dev,
+			"Registered watchdog chardev major 10, minor: %d\n",
+			watchdog_minors[i]);
+		break;
+	}
+	if (i == ARRAY_SIZE(watchdog_minors)) {
+		data->watchdog_miscdev.minor = 0;
+		dev_warn(&client->dev,
+			 "Couldn't register watchdog chardev (due to no free minor)\n");
+	}
+	mutex_unlock(&watchdog_data_mutex);
+
+	dev_info(&client->dev, "Detected FSC %s chip, revision: %d\n",
+		names[data->kind], (int) data->revision);
+
+	return 0;
+
+exit_detach:
+	fschmd_remove(client); /* will also free data for us */
+	return err;
+}
+
+static void fschmd_remove(struct i2c_client *client)
+{
+	struct fschmd_data *data = i2c_get_clientdata(client);
+	int i;
+
+	/* Unregister the watchdog (if registered) */
+	if (data->watchdog_miscdev.minor) {
+		misc_deregister(&data->watchdog_miscdev);
+		if (data->watchdog_is_open) {
+			dev_warn(&client->dev,
+				"i2c client detached with watchdog open! "
+				"Stopping watchdog.\n");
+			watchdog_stop(data);
+		}
+		mutex_lock(&watchdog_data_mutex);
+		list_del(&data->list);
+		mutex_unlock(&watchdog_data_mutex);
+		/* Tell the watchdog code the client is gone */
+		mutex_lock(&data->watchdog_lock);
+		data->client = NULL;
+		mutex_unlock(&data->watchdog_lock);
+	}
+
+	/*
+	 * Check if registered in case we're called from fschmd_detect
+	 * to cleanup after an error
+	 */
+	if (data->hwmon_dev)
+		hwmon_device_unregister(data->hwmon_dev);
+
+	device_remove_file(&client->dev, &dev_attr_alert_led);
+	for (i = 0; i < (FSCHMD_NO_VOLT_SENSORS[data->kind]); i++)
+		device_remove_file(&client->dev, &fschmd_attr[i].dev_attr);
+	for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++)
+		device_remove_file(&client->dev,
+					&fschmd_temp_attr[i].dev_attr);
+	for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++)
+		device_remove_file(&client->dev,
+					&fschmd_fan_attr[i].dev_attr);
+
+	mutex_lock(&watchdog_data_mutex);
+	kref_put(&data->kref, fschmd_release_resources);
+	mutex_unlock(&watchdog_data_mutex);
+}
+
+static struct fschmd_data *fschmd_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct fschmd_data *data = i2c_get_clientdata(client);
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
+
+		for (i = 0; i < FSCHMD_NO_TEMP_SENSORS[data->kind]; i++) {
+			data->temp_act[i] = i2c_smbus_read_byte_data(client,
+					FSCHMD_REG_TEMP_ACT[data->kind][i]);
+			data->temp_status[i] = i2c_smbus_read_byte_data(client,
+					FSCHMD_REG_TEMP_STATE[data->kind][i]);
+
+			/* The fscpos doesn't have TEMP_LIMIT registers */
+			if (FSCHMD_REG_TEMP_LIMIT[data->kind][i])
+				data->temp_max[i] = i2c_smbus_read_byte_data(
+					client,
+					FSCHMD_REG_TEMP_LIMIT[data->kind][i]);
+
+			/*
+			 * reset alarm if the alarm condition is gone,
+			 * the chip doesn't do this itself
+			 */
+			if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) ==
+					FSCHMD_TEMP_ALARM_MASK &&
+					data->temp_act[i] < data->temp_max[i])
+				i2c_smbus_write_byte_data(client,
+					FSCHMD_REG_TEMP_STATE[data->kind][i],
+					data->temp_status[i]);
+		}
+
+		for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) {
+			data->fan_act[i] = i2c_smbus_read_byte_data(client,
+					FSCHMD_REG_FAN_ACT[data->kind][i]);
+			data->fan_status[i] = i2c_smbus_read_byte_data(client,
+					FSCHMD_REG_FAN_STATE[data->kind][i]);
+			data->fan_ripple[i] = i2c_smbus_read_byte_data(client,
+					FSCHMD_REG_FAN_RIPPLE[data->kind][i]);
+
+			/* The fscpos third fan doesn't have a fan_min */
+			if (FSCHMD_REG_FAN_MIN[data->kind][i])
+				data->fan_min[i] = i2c_smbus_read_byte_data(
+					client,
+					FSCHMD_REG_FAN_MIN[data->kind][i]);
+
+			/* reset fan status if speed is back to > 0 */
+			if ((data->fan_status[i] & FSCHMD_FAN_ALARM) &&
+					data->fan_act[i])
+				i2c_smbus_write_byte_data(client,
+					FSCHMD_REG_FAN_STATE[data->kind][i],
+					data->fan_status[i]);
+		}
+
+		for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++)
+			data->volt[i] = i2c_smbus_read_byte_data(client,
+					       FSCHMD_REG_VOLT[data->kind][i]);
+
+		data->last_updated = jiffies;
+		data->valid = true;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+module_i2c_driver(fschmd_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles, Heimdall, Hades "
+			"and Syleus driver");
+MODULE_LICENSE("GPL");