Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 559 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
new file mode 100644
index 0000000000..0209933b9a
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -0,0 +1,559 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Intel CHT Whiskey Cove PMIC I2C Master driver
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
+ * Copyright (C) 2011 - 2014 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/acpi.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power/bq24190_charger.h>
+#include <linux/power/bq25890_charger.h>
+#include <linux/slab.h>
+
+#define CHT_WC_I2C_CTRL			0x5e24
+#define CHT_WC_I2C_CTRL_WR		BIT(0)
+#define CHT_WC_I2C_CTRL_RD		BIT(1)
+#define CHT_WC_I2C_CLIENT_ADDR		0x5e25
+#define CHT_WC_I2C_REG_OFFSET		0x5e26
+#define CHT_WC_I2C_WRDATA		0x5e27
+#define CHT_WC_I2C_RDDATA		0x5e28
+
+#define CHT_WC_EXTCHGRIRQ		0x6e0a
+#define CHT_WC_EXTCHGRIRQ_CLIENT_IRQ	BIT(0)
+#define CHT_WC_EXTCHGRIRQ_WRITE_IRQ	BIT(1)
+#define CHT_WC_EXTCHGRIRQ_READ_IRQ	BIT(2)
+#define CHT_WC_EXTCHGRIRQ_NACK_IRQ	BIT(3)
+#define CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK	((u8)GENMASK(3, 1))
+#define CHT_WC_EXTCHGRIRQ_MSK		0x6e17
+
+struct cht_wc_i2c_adap {
+	struct i2c_adapter adapter;
+	wait_queue_head_t wait;
+	struct irq_chip irqchip;
+	struct mutex adap_lock;
+	struct mutex irqchip_lock;
+	struct regmap *regmap;
+	struct irq_domain *irq_domain;
+	struct i2c_client *client;
+	int client_irq;
+	u8 irq_mask;
+	u8 old_irq_mask;
+	int read_data;
+	bool io_error;
+	bool done;
+};
+
+static irqreturn_t cht_wc_i2c_adap_thread_handler(int id, void *data)
+{
+	struct cht_wc_i2c_adap *adap = data;
+	int ret, reg;
+
+	mutex_lock(&adap->adap_lock);
+
+	/* Read IRQs */
+	ret = regmap_read(adap->regmap, CHT_WC_EXTCHGRIRQ, &reg);
+	if (ret) {
+		dev_err(&adap->adapter.dev, "Error reading extchgrirq reg\n");
+		mutex_unlock(&adap->adap_lock);
+		return IRQ_NONE;
+	}
+
+	reg &= ~adap->irq_mask;
+
+	/* Reads must be acked after reading the received data. */
+	ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, &adap->read_data);
+	if (ret)
+		adap->io_error = true;
+
+	/*
+	 * Immediately ack IRQs, so that if new IRQs arrives while we're
+	 * handling the previous ones our irq will re-trigger when we're done.
+	 */
+	ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, reg);
+	if (ret)
+		dev_err(&adap->adapter.dev, "Error writing extchgrirq reg\n");
+
+	if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK) {
+		adap->io_error |= !!(reg & CHT_WC_EXTCHGRIRQ_NACK_IRQ);
+		adap->done = true;
+	}
+
+	mutex_unlock(&adap->adap_lock);
+
+	if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK)
+		wake_up(&adap->wait);
+
+	/*
+	 * Do NOT use handle_nested_irq here, the client irq handler will
+	 * likely want to do i2c transfers and the i2c controller uses this
+	 * interrupt handler as well, so running the client irq handler from
+	 * this thread will cause things to lock up.
+	 */
+	if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ)
+		generic_handle_irq_safe(adap->client_irq);
+
+	return IRQ_HANDLED;
+}
+
+static u32 cht_wc_i2c_adap_master_func(struct i2c_adapter *adap)
+{
+	/* This i2c adapter only supports SMBUS byte transfers */
+	return I2C_FUNC_SMBUS_BYTE_DATA;
+}
+
+static int cht_wc_i2c_adap_smbus_xfer(struct i2c_adapter *_adap, u16 addr,
+				      unsigned short flags, char read_write,
+				      u8 command, int size,
+				      union i2c_smbus_data *data)
+{
+	struct cht_wc_i2c_adap *adap = i2c_get_adapdata(_adap);
+	int ret;
+
+	mutex_lock(&adap->adap_lock);
+	adap->io_error = false;
+	adap->done = false;
+	mutex_unlock(&adap->adap_lock);
+
+	ret = regmap_write(adap->regmap, CHT_WC_I2C_CLIENT_ADDR, addr);
+	if (ret)
+		return ret;
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		ret = regmap_write(adap->regmap, CHT_WC_I2C_WRDATA, data->byte);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_write(adap->regmap, CHT_WC_I2C_REG_OFFSET, command);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(adap->regmap, CHT_WC_I2C_CTRL,
+			   (read_write == I2C_SMBUS_WRITE) ?
+			   CHT_WC_I2C_CTRL_WR : CHT_WC_I2C_CTRL_RD);
+	if (ret)
+		return ret;
+
+	ret = wait_event_timeout(adap->wait, adap->done, msecs_to_jiffies(30));
+	if (ret == 0) {
+		/*
+		 * The CHT GPIO controller serializes all IRQs, sometimes
+		 * causing significant delays, check status manually.
+		 */
+		cht_wc_i2c_adap_thread_handler(0, adap);
+		if (!adap->done)
+			return -ETIMEDOUT;
+	}
+
+	ret = 0;
+	mutex_lock(&adap->adap_lock);
+	if (adap->io_error)
+		ret = -EIO;
+	else if (read_write == I2C_SMBUS_READ)
+		data->byte = adap->read_data;
+	mutex_unlock(&adap->adap_lock);
+
+	return ret;
+}
+
+static const struct i2c_algorithm cht_wc_i2c_adap_algo = {
+	.functionality = cht_wc_i2c_adap_master_func,
+	.smbus_xfer = cht_wc_i2c_adap_smbus_xfer,
+};
+
+/*
+ * We are an i2c-adapter which itself is part of an i2c-client. This means that
+ * transfers done through us take adapter->bus_lock twice, once for our parent
+ * i2c-adapter and once to take our own bus_lock. Lockdep does not like this
+ * nested locking, to make lockdep happy in the case of busses with muxes, the
+ * i2c-core's i2c_adapter_lock_bus function calls:
+ * rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
+ *
+ * But i2c_adapter_depth only works when the direct parent of the adapter is
+ * another adapter, as it is only meant for muxes. In our case there is an
+ * i2c-client and MFD instantiated platform_device in the parent->child chain
+ * between the 2 devices.
+ *
+ * So we override the default i2c_lock_operations and pass a hardcoded
+ * depth of 1 to rt_mutex_lock_nested, to make lockdep happy.
+ *
+ * Note that if there were to be a mux attached to our adapter, this would
+ * break things again since the i2c-mux code expects the root-adapter to have
+ * a locking depth of 0. But we always have only 1 client directly attached
+ * in the form of the Charger IC paired with the CHT Whiskey Cove PMIC.
+ */
+static void cht_wc_i2c_adap_lock_bus(struct i2c_adapter *adapter,
+				 unsigned int flags)
+{
+	rt_mutex_lock_nested(&adapter->bus_lock, 1);
+}
+
+static int cht_wc_i2c_adap_trylock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	return rt_mutex_trylock(&adapter->bus_lock);
+}
+
+static void cht_wc_i2c_adap_unlock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	rt_mutex_unlock(&adapter->bus_lock);
+}
+
+static const struct i2c_lock_operations cht_wc_i2c_adap_lock_ops = {
+	.lock_bus =    cht_wc_i2c_adap_lock_bus,
+	.trylock_bus = cht_wc_i2c_adap_trylock_bus,
+	.unlock_bus =  cht_wc_i2c_adap_unlock_bus,
+};
+
+/**** irqchip for the client connected to the extchgr i2c adapter ****/
+static void cht_wc_i2c_irq_lock(struct irq_data *data)
+{
+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&adap->irqchip_lock);
+}
+
+static void cht_wc_i2c_irq_sync_unlock(struct irq_data *data)
+{
+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
+	int ret;
+
+	if (adap->irq_mask != adap->old_irq_mask) {
+		ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK,
+				   adap->irq_mask);
+		if (ret == 0)
+			adap->old_irq_mask = adap->irq_mask;
+		else
+			dev_err(&adap->adapter.dev, "Error writing EXTCHGRIRQ_MSK\n");
+	}
+
+	mutex_unlock(&adap->irqchip_lock);
+}
+
+static void cht_wc_i2c_irq_enable(struct irq_data *data)
+{
+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
+
+	adap->irq_mask &= ~CHT_WC_EXTCHGRIRQ_CLIENT_IRQ;
+}
+
+static void cht_wc_i2c_irq_disable(struct irq_data *data)
+{
+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
+
+	adap->irq_mask |= CHT_WC_EXTCHGRIRQ_CLIENT_IRQ;
+}
+
+static const struct irq_chip cht_wc_i2c_irq_chip = {
+	.irq_bus_lock		= cht_wc_i2c_irq_lock,
+	.irq_bus_sync_unlock	= cht_wc_i2c_irq_sync_unlock,
+	.irq_disable		= cht_wc_i2c_irq_disable,
+	.irq_enable		= cht_wc_i2c_irq_enable,
+	.name			= "cht_wc_ext_chrg_irq_chip",
+};
+
+/********** GPD Win / Pocket charger IC settings **********/
+static const char * const bq24190_suppliers[] = {
+	"tcpm-source-psy-i2c-fusb302" };
+
+static const struct property_entry bq24190_props[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers),
+	PROPERTY_ENTRY_BOOL("omit-battery-class"),
+	PROPERTY_ENTRY_BOOL("disable-reset"),
+	{ }
+};
+
+static const struct software_node bq24190_node = {
+	.properties = bq24190_props,
+};
+
+static struct regulator_consumer_supply fusb302_consumer = {
+	.supply = "vbus",
+	/* Must match fusb302 dev_name in intel_cht_int33fe.c */
+	.dev_name = "i2c-fusb302",
+};
+
+static const struct regulator_init_data bq24190_vbus_init_data = {
+	.constraints = {
+		/* The name is used in intel_cht_int33fe.c do not change. */
+		.name = "cht_wc_usb_typec_vbus",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = &fusb302_consumer,
+	.num_consumer_supplies = 1,
+};
+
+static struct bq24190_platform_data bq24190_pdata = {
+	.regulator_init_data = &bq24190_vbus_init_data,
+};
+
+static struct i2c_board_info gpd_win_board_info = {
+	.type = "bq24190",
+	.addr = 0x6b,
+	.dev_name = "bq24190",
+	.swnode = &bq24190_node,
+	.platform_data = &bq24190_pdata,
+};
+
+/********** Xiaomi Mi Pad 2 charger IC settings  **********/
+static struct regulator_consumer_supply bq2589x_vbus_consumer = {
+	.supply = "vbus",
+	.dev_name = "cht_wcove_pwrsrc",
+};
+
+static const struct regulator_init_data bq2589x_vbus_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = &bq2589x_vbus_consumer,
+	.num_consumer_supplies = 1,
+};
+
+static struct bq25890_platform_data bq2589x_pdata = {
+	.regulator_init_data = &bq2589x_vbus_init_data,
+};
+
+static const struct property_entry xiaomi_mipad2_props[] = {
+	PROPERTY_ENTRY_BOOL("linux,skip-reset"),
+	PROPERTY_ENTRY_BOOL("linux,read-back-settings"),
+	{ }
+};
+
+static const struct software_node xiaomi_mipad2_node = {
+	.properties = xiaomi_mipad2_props,
+};
+
+static struct i2c_board_info xiaomi_mipad2_board_info = {
+	.type = "bq25890",
+	.addr = 0x6a,
+	.dev_name = "bq25890",
+	.swnode = &xiaomi_mipad2_node,
+	.platform_data = &bq2589x_pdata,
+};
+
+/********** Lenovo Yogabook YB1-X90F/-X91F/-X91L charger settings **********/
+static const char * const lenovo_yb1_bq25892_suppliers[] = { "cht_wcove_pwrsrc" };
+
+static const struct property_entry lenovo_yb1_bq25892_props[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("supplied-from",
+				    lenovo_yb1_bq25892_suppliers),
+	PROPERTY_ENTRY_U32("linux,pump-express-vbus-max", 12000000),
+	PROPERTY_ENTRY_BOOL("linux,skip-reset"),
+	/*
+	 * The firmware sets everything to the defaults, which leads to a
+	 * somewhat low charge-current of 2048mA and worse to a battery-voltage
+	 * of 4.2V instead of 4.35V (when booted without a charger connected).
+	 * Use our own values instead of "linux,read-back-settings" to fix this.
+	 */
+	PROPERTY_ENTRY_U32("ti,charge-current", 4224000),
+	PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000),
+	PROPERTY_ENTRY_U32("ti,termination-current", 256000),
+	PROPERTY_ENTRY_U32("ti,precharge-current", 128000),
+	PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3500000),
+	PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000),
+	PROPERTY_ENTRY_U32("ti,boost-max-current", 1400000),
+	PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"),
+	{ }
+};
+
+static const struct software_node lenovo_yb1_bq25892_node = {
+	.properties = lenovo_yb1_bq25892_props,
+};
+
+static struct i2c_board_info lenovo_yogabook1_board_info = {
+	.type = "bq25892",
+	.addr = 0x6b,
+	.dev_name = "bq25892",
+	.swnode = &lenovo_yb1_bq25892_node,
+	.platform_data = &bq2589x_pdata,
+};
+
+/********** Lenovo Yogabook YT3-X90F charger settings **********/
+static const char * const lenovo_yt3_bq25892_1_suppliers[] = { "cht_wcove_pwrsrc" };
+
+/*
+ * bq25892 charger settings for the round li-ion cells in the hinge,
+ * this is the main / biggest battery.
+ */
+static const struct property_entry lenovo_yt3_bq25892_1_props[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lenovo_yt3_bq25892_1_suppliers),
+	PROPERTY_ENTRY_STRING("linux,secondary-charger-name", "bq25890-charger-0"),
+	PROPERTY_ENTRY_U32("linux,iinlim-percentage", 60),
+	PROPERTY_ENTRY_U32("linux,pump-express-vbus-max", 12000000),
+	PROPERTY_ENTRY_BOOL("linux,skip-reset"),
+	/*
+	 * The firmware sets everything to the defaults, leading to a low(ish)
+	 * charge-current and battery-voltage of 2048mA resp 4.2V. Use the
+	 * Android values instead of "linux,read-back-settings" to fix this.
+	 */
+	PROPERTY_ENTRY_U32("ti,charge-current", 3072000),
+	PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000),
+	PROPERTY_ENTRY_U32("ti,termination-current", 128000),
+	PROPERTY_ENTRY_U32("ti,precharge-current", 128000),
+	PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3700000),
+	PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"),
+	/* Set 5V boost current-limit to 1.2A (MAX/POR values are 2.45A/1.4A) */
+	PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000),
+	PROPERTY_ENTRY_U32("ti,boost-max-current", 1200000),
+	{ }
+};
+
+static const struct software_node lenovo_yt3_bq25892_1_node = {
+	.properties = lenovo_yt3_bq25892_1_props,
+};
+
+/* bq25892 charger for the round li-ion cells in the hinge */
+static struct i2c_board_info lenovo_yoga_tab3_board_info = {
+	.type = "bq25892",
+	.addr = 0x6b,
+	.dev_name = "bq25892_1",
+	.swnode = &lenovo_yt3_bq25892_1_node,
+	.platform_data = &bq2589x_pdata,
+};
+
+static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	struct i2c_board_info *board_info = NULL;
+	struct cht_wc_i2c_adap *adap;
+	int ret, reg, irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	adap = devm_kzalloc(&pdev->dev, sizeof(*adap), GFP_KERNEL);
+	if (!adap)
+		return -ENOMEM;
+
+	init_waitqueue_head(&adap->wait);
+	mutex_init(&adap->adap_lock);
+	mutex_init(&adap->irqchip_lock);
+	adap->irqchip = cht_wc_i2c_irq_chip;
+	adap->regmap = pmic->regmap;
+	adap->adapter.owner = THIS_MODULE;
+	adap->adapter.class = I2C_CLASS_HWMON;
+	adap->adapter.algo = &cht_wc_i2c_adap_algo;
+	adap->adapter.lock_ops = &cht_wc_i2c_adap_lock_ops;
+	strscpy(adap->adapter.name, "PMIC I2C Adapter",
+		sizeof(adap->adapter.name));
+	adap->adapter.dev.parent = &pdev->dev;
+
+	/* Clear and activate i2c-adapter interrupts, disable client IRQ */
+	adap->old_irq_mask = adap->irq_mask = ~CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK;
+
+	ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, &reg);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, ~adap->irq_mask);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK, adap->irq_mask);
+	if (ret)
+		return ret;
+
+	/* Alloc and register client IRQ */
+	adap->irq_domain = irq_domain_add_linear(NULL, 1, &irq_domain_simple_ops, NULL);
+	if (!adap->irq_domain)
+		return -ENOMEM;
+
+	adap->client_irq = irq_create_mapping(adap->irq_domain, 0);
+	if (!adap->client_irq) {
+		ret = -ENOMEM;
+		goto remove_irq_domain;
+	}
+
+	irq_set_chip_data(adap->client_irq, adap);
+	irq_set_chip_and_handler(adap->client_irq, &adap->irqchip,
+				 handle_simple_irq);
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					cht_wc_i2c_adap_thread_handler,
+					IRQF_ONESHOT, "PMIC I2C Adapter", adap);
+	if (ret)
+		goto remove_irq_domain;
+
+	i2c_set_adapdata(&adap->adapter, adap);
+	ret = i2c_add_adapter(&adap->adapter);
+	if (ret)
+		goto remove_irq_domain;
+
+	switch (pmic->cht_wc_model) {
+	case INTEL_CHT_WC_GPD_WIN_POCKET:
+		board_info = &gpd_win_board_info;
+		break;
+	case INTEL_CHT_WC_XIAOMI_MIPAD2:
+		board_info = &xiaomi_mipad2_board_info;
+		break;
+	case INTEL_CHT_WC_LENOVO_YOGABOOK1:
+		board_info = &lenovo_yogabook1_board_info;
+		break;
+	case INTEL_CHT_WC_LENOVO_YT3_X90:
+		board_info = &lenovo_yoga_tab3_board_info;
+		break;
+	default:
+		dev_warn(&pdev->dev, "Unknown model, not instantiating charger device\n");
+		break;
+	}
+
+	if (board_info) {
+		board_info->irq = adap->client_irq;
+		adap->client = i2c_new_client_device(&adap->adapter, board_info);
+		if (IS_ERR(adap->client)) {
+			ret = PTR_ERR(adap->client);
+			goto del_adapter;
+		}
+	}
+
+	platform_set_drvdata(pdev, adap);
+	return 0;
+
+del_adapter:
+	i2c_del_adapter(&adap->adapter);
+remove_irq_domain:
+	irq_domain_remove(adap->irq_domain);
+	return ret;
+}
+
+static void cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev)
+{
+	struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev);
+
+	i2c_unregister_device(adap->client);
+	i2c_del_adapter(&adap->adapter);
+	irq_domain_remove(adap->irq_domain);
+}
+
+static const struct platform_device_id cht_wc_i2c_adap_id_table[] = {
+	{ .name = "cht_wcove_ext_chgr" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, cht_wc_i2c_adap_id_table);
+
+static struct platform_driver cht_wc_i2c_adap_driver = {
+	.probe = cht_wc_i2c_adap_i2c_probe,
+	.remove_new = cht_wc_i2c_adap_i2c_remove,
+	.driver = {
+		.name = "cht_wcove_ext_chgr",
+	},
+	.id_table = cht_wc_i2c_adap_id_table,
+};
+module_platform_driver(cht_wc_i2c_adap_driver);
+
+MODULE_DESCRIPTION("Intel CHT Whiskey Cove PMIC I2C Master driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");