Merging upstream version 6.10.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

33 files changed, 2652 insertions, 481 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 0d9282fa67..8db68b80b3 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -70,6 +70,23 @@ config AD7124
 	  To compile this driver as a module, choose M here: the module will be
 	  called ad7124.
 
+config AD7173
+	tristate "Analog Devices AD7173 driver"
+	depends on SPI_MASTER
+	select AD_SIGMA_DELTA
+	select GPIO_REGMAP if GPIOLIB
+	select REGMAP_SPI if GPIOLIB
+	help
+	  Say yes here to build support for Analog Devices AD7173 and similar ADC
+	  Currently supported models:
+	   - AD7172-2
+	   - AD7173-8
+	   - AD7175-2
+	   - AD7176-2
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ad7173.
+
 config AD7192
 	tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver"
 	depends on SPI
@@ -264,6 +281,16 @@ config AD7923
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7923.
 
+config AD7944
+	tristate "Analog Devices AD7944 and similar ADCs driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices
+	  AD7944, AD7985, AD7986 ADCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7944
+
 config AD7949
 	tristate "Analog Devices AD7949 and similar ADCs driver"
 	depends on SPI
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index b3c4347223..edb32ce2af 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_AD7091R) += ad7091r-base.o
 obj-$(CONFIG_AD7091R5) += ad7091r5.o
 obj-$(CONFIG_AD7091R8) += ad7091r8.o
 obj-$(CONFIG_AD7124) += ad7124.o
+obj-$(CONFIG_AD7173) += ad7173.o
 obj-$(CONFIG_AD7192) += ad7192.o
 obj-$(CONFIG_AD7266) += ad7266.o
 obj-$(CONFIG_AD7280) += ad7280a.o
@@ -28,6 +29,7 @@ obj-$(CONFIG_AD7780) += ad7780.o
 obj-$(CONFIG_AD7791) += ad7791.o
 obj-$(CONFIG_AD7793) += ad7793.o
 obj-$(CONFIG_AD7887) += ad7887.o
+obj-$(CONFIG_AD7944) += ad7944.o
 obj-$(CONFIG_AD7949) += ad7949.o
 obj-$(CONFIG_AD799X) += ad799x.o
 obj-$(CONFIG_AD9467) += ad9467.o
diff --git a/drivers/iio/adc/ab8500-gpadc.c b/drivers/iio/adc/ab8500-gpadc.c
index 80645fee79..59f66e9cb0 100644
--- a/drivers/iio/adc/ab8500-gpadc.c
+++ b/drivers/iio/adc/ab8500-gpadc.c
@@ -1021,14 +1021,13 @@ static int ab8500_gpadc_parse_channel(struct device *dev,
 /**
  * ab8500_gpadc_parse_channels() - Parse the GPADC channels from DT
  * @gpadc: the GPADC to configure the channels for
- * @chans: the IIO channels we parsed
- * @nchans: the number of IIO channels we parsed
+ * @chans_parsed: the IIO channels we parsed
+ * @nchans_parsed: the number of IIO channels we parsed
  */
 static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
 				       struct iio_chan_spec **chans_parsed,
 				       unsigned int *nchans_parsed)
 {
-	struct fwnode_handle *child;
 	struct ab8500_gpadc_chan_info *ch;
 	struct iio_chan_spec *iio_chans;
 	unsigned int nchans;
@@ -1052,7 +1051,7 @@ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
 		return -ENOMEM;
 
 	i = 0;
-	device_for_each_child_node(gpadc->dev, child) {
+	device_for_each_child_node_scoped(gpadc->dev, child) {
 		struct iio_chan_spec *iio_chan;
 		int ret;
 
@@ -1062,7 +1061,6 @@ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
 		ret = ab8500_gpadc_parse_channel(gpadc->dev, child, ch,
 						 iio_chan);
 		if (ret) {
-			fwnode_handle_put(child);
 			return ret;
 		}
 		i++;
diff --git a/drivers/iio/adc/ad4130.c b/drivers/iio/adc/ad4130.c
index febb64e679..aaf1fb0ac4 100644
--- a/drivers/iio/adc/ad4130.c
+++ b/drivers/iio/adc/ad4130.c
@@ -1600,17 +1600,14 @@ static int ad4130_parse_fw_children(struct iio_dev *indio_dev)
 {
 	struct ad4130_state *st = iio_priv(indio_dev);
 	struct device *dev = &st->spi->dev;
-	struct fwnode_handle *child;
 	int ret;
 
 	indio_dev->channels = st->chans;
 
-	device_for_each_child_node(dev, child) {
+	device_for_each_child_node_scoped(dev, child) {
 		ret = ad4130_parse_fw_channel(indio_dev, child);
-		if (ret) {
-			fwnode_handle_put(child);
+		if (ret)
 			return ret;
-		}
 	}
 
 	return 0;
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index b9b206fcd7..e7b1d517d3 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -14,7 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/kfifo.h>
 #include <linux/module.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
 
@@ -807,22 +808,19 @@ static int ad7124_check_chip_id(struct ad7124_state *st)
 	return 0;
 }
 
-static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
-					  struct device_node *np)
+static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
+				       struct device *dev)
 {
 	struct ad7124_state *st = iio_priv(indio_dev);
 	struct ad7124_channel_config *cfg;
 	struct ad7124_channel *channels;
-	struct device_node *child;
 	struct iio_chan_spec *chan;
 	unsigned int ain[2], channel = 0, tmp;
 	int ret;
 
-	st->num_channels = of_get_available_child_count(np);
-	if (!st->num_channels) {
-		dev_err(indio_dev->dev.parent, "no channel children\n");
-		return -ENODEV;
-	}
+	st->num_channels = device_get_child_node_count(dev);
+	if (!st->num_channels)
+		return dev_err_probe(dev, -ENODEV, "no channel children\n");
 
 	chan = devm_kcalloc(indio_dev->dev.parent, st->num_channels,
 			    sizeof(*chan), GFP_KERNEL);
@@ -838,39 +836,38 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
 	indio_dev->num_channels = st->num_channels;
 	st->channels = channels;
 
-	for_each_available_child_of_node(np, child) {
+	device_for_each_child_node_scoped(dev, child) {
 		cfg = &st->channels[channel].cfg;
 
-		ret = of_property_read_u32(child, "reg", &channel);
+		ret = fwnode_property_read_u32(child, "reg", &channel);
 		if (ret)
-			goto err;
+			return ret;
 
-		if (channel >= indio_dev->num_channels) {
-			dev_err(indio_dev->dev.parent,
+		if (channel >= indio_dev->num_channels)
+			return dev_err_probe(dev, -EINVAL,
 				"Channel index >= number of channels\n");
-			ret = -EINVAL;
-			goto err;
-		}
 
-		ret = of_property_read_u32_array(child, "diff-channels",
-						 ain, 2);
+		ret = fwnode_property_read_u32_array(child, "diff-channels",
+						     ain, 2);
 		if (ret)
-			goto err;
+			return ret;
 
 		st->channels[channel].nr = channel;
 		st->channels[channel].ain = AD7124_CHANNEL_AINP(ain[0]) |
 						  AD7124_CHANNEL_AINM(ain[1]);
 
-		cfg->bipolar = of_property_read_bool(child, "bipolar");
+		cfg->bipolar = fwnode_property_read_bool(child, "bipolar");
 
-		ret = of_property_read_u32(child, "adi,reference-select", &tmp);
+		ret = fwnode_property_read_u32(child, "adi,reference-select", &tmp);
 		if (ret)
 			cfg->refsel = AD7124_INT_REF;
 		else
 			cfg->refsel = tmp;
 
-		cfg->buf_positive = of_property_read_bool(child, "adi,buffered-positive");
-		cfg->buf_negative = of_property_read_bool(child, "adi,buffered-negative");
+		cfg->buf_positive =
+			fwnode_property_read_bool(child, "adi,buffered-positive");
+		cfg->buf_negative =
+			fwnode_property_read_bool(child, "adi,buffered-negative");
 
 		chan[channel] = ad7124_channel_template;
 		chan[channel].address = channel;
@@ -880,10 +877,6 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
 	}
 
 	return 0;
-err:
-	of_node_put(child);
-
-	return ret;
 }
 
 static int ad7124_setup(struct ad7124_state *st)
@@ -943,9 +936,7 @@ static int ad7124_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 	int i, ret;
 
-	info = of_device_get_match_data(&spi->dev);
-	if (!info)
-		info = (void *)spi_get_device_id(spi)->driver_data;
+	info = spi_get_device_match_data(spi);
 	if (!info)
 		return -ENODEV;
 
@@ -965,7 +956,7 @@ static int ad7124_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	ret = ad7124_of_parse_channel_config(indio_dev, spi->dev.of_node);
+	ret = ad7124_parse_channel_config(indio_dev, &spi->dev);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c
new file mode 100644
index 0000000000..b26d4575e2
--- /dev/null
+++ b/drivers/iio/adc/ad7173.c
@@ -0,0 +1,1181 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AD717x family SPI ADC driver
+ *
+ * Supported devices:
+ *  AD7172-2/AD7172-4/AD7173-8/AD7175-2
+ *  AD7175-8/AD7176-2/AD7177-2
+ *
+ * Copyright (C) 2015, 2024 Analog Devices, Inc.
+ */
+
+#include <linux/array_size.h>
+#include <linux/bitfield.h>
+#include <linux/bitmap.h>
+#include <linux/container_of.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/regmap.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/adc/ad_sigma_delta.h>
+
+#define AD7173_REG_COMMS		0x00
+#define AD7173_REG_ADC_MODE		0x01
+#define AD7173_REG_INTERFACE_MODE	0x02
+#define AD7173_REG_CRC			0x03
+#define AD7173_REG_DATA			0x04
+#define AD7173_REG_GPIO			0x06
+#define AD7173_REG_ID			0x07
+#define AD7173_REG_CH(x)		(0x10 + (x))
+#define AD7173_REG_SETUP(x)		(0x20 + (x))
+#define AD7173_REG_FILTER(x)		(0x28 + (x))
+#define AD7173_REG_OFFSET(x)		(0x30 + (x))
+#define AD7173_REG_GAIN(x)		(0x38 + (x))
+
+#define AD7173_RESET_LENGTH		BITS_TO_BYTES(64)
+
+#define AD7173_CH_ENABLE		BIT(15)
+#define AD7173_CH_SETUP_SEL_MASK	GENMASK(14, 12)
+#define AD7173_CH_SETUP_AINPOS_MASK	GENMASK(9, 5)
+#define AD7173_CH_SETUP_AINNEG_MASK	GENMASK(4, 0)
+
+#define AD7173_CH_ADDRESS(pos, neg) \
+	(FIELD_PREP(AD7173_CH_SETUP_AINPOS_MASK, pos) | \
+	 FIELD_PREP(AD7173_CH_SETUP_AINNEG_MASK, neg))
+#define AD7173_AIN_TEMP_POS	17
+#define AD7173_AIN_TEMP_NEG	18
+
+#define AD7172_2_ID			0x00d0
+#define AD7175_ID			0x0cd0
+#define AD7176_ID			0x0c90
+#define AD7175_2_ID			0x0cd0
+#define AD7172_4_ID			0x2050
+#define AD7173_ID			0x30d0
+#define AD7175_8_ID			0x3cd0
+#define AD7177_ID			0x4fd0
+#define AD7173_ID_MASK			GENMASK(15, 4)
+
+#define AD7173_ADC_MODE_REF_EN		BIT(15)
+#define AD7173_ADC_MODE_SING_CYC	BIT(13)
+#define AD7173_ADC_MODE_MODE_MASK	GENMASK(6, 4)
+#define AD7173_ADC_MODE_CLOCKSEL_MASK	GENMASK(3, 2)
+#define AD7173_ADC_MODE_CLOCKSEL_INT		0x0
+#define AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT	0x1
+#define AD7173_ADC_MODE_CLOCKSEL_EXT		0x2
+#define AD7173_ADC_MODE_CLOCKSEL_XTAL		0x3
+
+#define AD7173_GPIO_PDSW	BIT(14)
+#define AD7173_GPIO_OP_EN2_3	BIT(13)
+#define AD7173_GPIO_MUX_IO	BIT(12)
+#define AD7173_GPIO_SYNC_EN	BIT(11)
+#define AD7173_GPIO_ERR_EN	BIT(10)
+#define AD7173_GPIO_ERR_DAT	BIT(9)
+#define AD7173_GPIO_GP_DATA3	BIT(7)
+#define AD7173_GPIO_GP_DATA2	BIT(6)
+#define AD7173_GPIO_IP_EN1	BIT(5)
+#define AD7173_GPIO_IP_EN0	BIT(4)
+#define AD7173_GPIO_OP_EN1	BIT(3)
+#define AD7173_GPIO_OP_EN0	BIT(2)
+#define AD7173_GPIO_GP_DATA1	BIT(1)
+#define AD7173_GPIO_GP_DATA0	BIT(0)
+
+#define AD7173_GPO12_DATA(x)	BIT((x) + 0)
+#define AD7173_GPO23_DATA(x)	BIT((x) + 4)
+#define AD7173_GPO_DATA(x)	((x) < 2 ? AD7173_GPO12_DATA(x) : AD7173_GPO23_DATA(x))
+
+#define AD7173_INTERFACE_DATA_STAT	BIT(6)
+#define AD7173_INTERFACE_DATA_STAT_EN(x) \
+	FIELD_PREP(AD7173_INTERFACE_DATA_STAT, x)
+
+#define AD7173_SETUP_BIPOLAR		BIT(12)
+#define AD7173_SETUP_AREF_BUF_MASK	GENMASK(11, 10)
+#define AD7173_SETUP_AIN_BUF_MASK	GENMASK(9, 8)
+
+#define AD7173_SETUP_REF_SEL_MASK	GENMASK(5, 4)
+#define AD7173_SETUP_REF_SEL_AVDD1_AVSS	0x3
+#define AD7173_SETUP_REF_SEL_INT_REF	0x2
+#define AD7173_SETUP_REF_SEL_EXT_REF2	0x1
+#define AD7173_SETUP_REF_SEL_EXT_REF	0x0
+#define AD7173_VOLTAGE_INT_REF_uV	2500000
+#define AD7173_TEMP_SENSIIVITY_uV_per_C	477
+#define AD7177_ODR_START_VALUE		0x07
+
+#define AD7173_FILTER_ODR0_MASK		GENMASK(5, 0)
+#define AD7173_MAX_CONFIGS		8
+
+enum ad7173_ids {
+	ID_AD7172_2,
+	ID_AD7172_4,
+	ID_AD7173_8,
+	ID_AD7175_2,
+	ID_AD7175_8,
+	ID_AD7176_2,
+	ID_AD7177_2,
+};
+
+struct ad7173_device_info {
+	const unsigned int *sinc5_data_rates;
+	unsigned int num_sinc5_data_rates;
+	unsigned int odr_start_value;
+	unsigned int num_channels;
+	unsigned int num_configs;
+	unsigned int num_inputs;
+	unsigned int clock;
+	unsigned int id;
+	char *name;
+	bool has_temp;
+	bool has_input_buf;
+	bool has_int_ref;
+	bool has_ref2;
+	u8 num_gpios;
+};
+
+struct ad7173_channel_config {
+	u8 cfg_slot;
+	bool live;
+
+	/* Following fields are used to compare equality. */
+	struct_group(config_props,
+		bool bipolar;
+		bool input_buf;
+		u8 odr;
+		u8 ref_sel;
+	);
+};
+
+struct ad7173_channel {
+	unsigned int chan_reg;
+	unsigned int ain;
+	struct ad7173_channel_config cfg;
+};
+
+struct ad7173_state {
+	struct ad_sigma_delta sd;
+	const struct ad7173_device_info *info;
+	struct ad7173_channel *channels;
+	struct regulator_bulk_data regulators[3];
+	unsigned int adc_mode;
+	unsigned int interface_mode;
+	unsigned int num_channels;
+	struct ida cfg_slots_status;
+	unsigned long long config_usage_counter;
+	unsigned long long *config_cnts;
+	struct clk *ext_clk;
+	struct clk_hw int_clk_hw;
+#if IS_ENABLED(CONFIG_GPIOLIB)
+	struct regmap *reg_gpiocon_regmap;
+	struct gpio_regmap *gpio_regmap;
+#endif
+};
+
+static const unsigned int ad7173_sinc5_data_rates[] = {
+	6211000, 6211000, 6211000, 6211000, 6211000, 6211000, 5181000, 4444000,	/*  0-7  */
+	3115000, 2597000, 1007000, 503800,  381000,  200300,  100500,  59520,	/*  8-15 */
+	49680,	 20010,	  16333,   10000,   5000,    2500,    1250,		/* 16-22 */
+};
+
+static const unsigned int ad7175_sinc5_data_rates[] = {
+	50000000, 41667000, 31250000, 27778000,	/*  0-3  */
+	20833000, 17857000, 12500000, 10000000,	/*  4-7  */
+	5000000,  2500000,  1000000,  500000,	/*  8-11 */
+	397500,   200000,   100000,   59920,	/* 12-15 */
+	49960,    20000,    16666,    10000,	/* 16-19 */
+	5000,					/* 20    */
+};
+
+static const struct ad7173_device_info ad7173_device_info[] = {
+	[ID_AD7172_2] = {
+		.name = "ad7172-2",
+		.id = AD7172_2_ID,
+		.num_inputs = 5,
+		.num_channels = 4,
+		.num_configs = 4,
+		.num_gpios = 2,
+		.has_temp = true,
+		.has_input_buf = true,
+		.has_int_ref = true,
+		.clock = 2 * HZ_PER_MHZ,
+		.sinc5_data_rates = ad7173_sinc5_data_rates,
+		.num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates),
+	},
+	[ID_AD7172_4] = {
+		.name = "ad7172-4",
+		.id = AD7172_4_ID,
+		.num_inputs = 9,
+		.num_channels = 8,
+		.num_configs = 8,
+		.num_gpios = 4,
+		.has_temp = false,
+		.has_input_buf = true,
+		.has_ref2 = true,
+		.clock = 2 * HZ_PER_MHZ,
+		.sinc5_data_rates = ad7173_sinc5_data_rates,
+		.num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates),
+	},
+	[ID_AD7173_8] = {
+		.name = "ad7173-8",
+		.id = AD7173_ID,
+		.num_inputs = 17,
+		.num_channels = 16,
+		.num_configs = 8,
+		.num_gpios = 4,
+		.has_temp = true,
+		.has_input_buf = true,
+		.has_int_ref = true,
+		.has_ref2 = true,
+		.clock = 2 * HZ_PER_MHZ,
+		.sinc5_data_rates = ad7173_sinc5_data_rates,
+		.num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates),
+	},
+	[ID_AD7175_2] = {
+		.name = "ad7175-2",
+		.id = AD7175_2_ID,
+		.num_inputs = 5,
+		.num_channels = 4,
+		.num_configs = 4,
+		.num_gpios = 2,
+		.has_temp = true,
+		.has_input_buf = true,
+		.has_int_ref = true,
+		.clock = 16 * HZ_PER_MHZ,
+		.sinc5_data_rates = ad7175_sinc5_data_rates,
+		.num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates),
+	},
+	[ID_AD7175_8] = {
+		.name = "ad7175-8",
+		.id = AD7175_8_ID,
+		.num_inputs = 17,
+		.num_channels = 16,
+		.num_configs = 8,
+		.num_gpios = 4,
+		.has_temp = true,
+		.has_input_buf = true,
+		.has_int_ref = true,
+		.has_ref2 = true,
+		.clock = 16 * HZ_PER_MHZ,
+		.sinc5_data_rates = ad7175_sinc5_data_rates,
+		.num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates),
+	},
+	[ID_AD7176_2] = {
+		.name = "ad7176-2",
+		.id = AD7176_ID,
+		.num_inputs = 5,
+		.num_channels = 4,
+		.num_configs = 4,
+		.num_gpios = 2,
+		.has_temp = false,
+		.has_input_buf = false,
+		.has_int_ref = true,
+		.clock = 16 * HZ_PER_MHZ,
+		.sinc5_data_rates = ad7175_sinc5_data_rates,
+		.num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates),
+	},
+	[ID_AD7177_2] = {
+		.name = "ad7177-2",
+		.id = AD7177_ID,
+		.num_inputs = 5,
+		.num_channels = 4,
+		.num_configs = 4,
+		.num_gpios = 2,
+		.has_temp = true,
+		.has_input_buf = true,
+		.has_int_ref = true,
+		.clock = 16 * HZ_PER_MHZ,
+		.odr_start_value = AD7177_ODR_START_VALUE,
+		.sinc5_data_rates = ad7175_sinc5_data_rates,
+		.num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates),
+	},
+};
+
+static const char *const ad7173_ref_sel_str[] = {
+	[AD7173_SETUP_REF_SEL_EXT_REF]    = "vref",
+	[AD7173_SETUP_REF_SEL_EXT_REF2]   = "vref2",
+	[AD7173_SETUP_REF_SEL_INT_REF]    = "refout-avss",
+	[AD7173_SETUP_REF_SEL_AVDD1_AVSS] = "avdd",
+};
+
+static const char *const ad7173_clk_sel[] = {
+	"ext-clk", "xtal"
+};
+
+#if IS_ENABLED(CONFIG_GPIOLIB)
+
+static const struct regmap_range ad7173_range_gpio[] = {
+	regmap_reg_range(AD7173_REG_GPIO, AD7173_REG_GPIO),
+};
+
+static const struct regmap_access_table ad7173_access_table = {
+	.yes_ranges = ad7173_range_gpio,
+	.n_yes_ranges = ARRAY_SIZE(ad7173_range_gpio),
+};
+
+static const struct regmap_config ad7173_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.rd_table = &ad7173_access_table,
+	.wr_table = &ad7173_access_table,
+	.read_flag_mask = BIT(6),
+};
+
+static int ad7173_mask_xlate(struct gpio_regmap *gpio, unsigned int base,
+			     unsigned int offset, unsigned int *reg,
+			     unsigned int *mask)
+{
+	*mask = AD7173_GPO_DATA(offset);
+	*reg = base;
+	return 0;
+}
+
+static void ad7173_gpio_disable(void *data)
+{
+	struct ad7173_state *st = data;
+	unsigned int mask;
+
+	mask = AD7173_GPIO_OP_EN0 | AD7173_GPIO_OP_EN1 | AD7173_GPIO_OP_EN2_3;
+	regmap_update_bits(st->reg_gpiocon_regmap, AD7173_REG_GPIO, mask, ~mask);
+}
+
+static int ad7173_gpio_init(struct ad7173_state *st)
+{
+	struct gpio_regmap_config gpio_regmap = {};
+	struct device *dev = &st->sd.spi->dev;
+	unsigned int mask;
+	int ret;
+
+	st->reg_gpiocon_regmap = devm_regmap_init_spi(st->sd.spi, &ad7173_regmap_config);
+	ret = PTR_ERR_OR_ZERO(st->reg_gpiocon_regmap);
+	if (ret)
+		return dev_err_probe(dev, ret, "Unable to init regmap\n");
+
+	mask = AD7173_GPIO_OP_EN0 | AD7173_GPIO_OP_EN1 | AD7173_GPIO_OP_EN2_3;
+	regmap_update_bits(st->reg_gpiocon_regmap, AD7173_REG_GPIO, mask, mask);
+
+	ret = devm_add_action_or_reset(dev, ad7173_gpio_disable, st);
+	if (ret)
+		return ret;
+
+	gpio_regmap.parent = dev;
+	gpio_regmap.regmap = st->reg_gpiocon_regmap;
+	gpio_regmap.ngpio = st->info->num_gpios;
+	gpio_regmap.reg_set_base = AD7173_REG_GPIO;
+	gpio_regmap.reg_mask_xlate = ad7173_mask_xlate;
+
+	st->gpio_regmap = devm_gpio_regmap_register(dev, &gpio_regmap);
+	ret = PTR_ERR_OR_ZERO(st->gpio_regmap);
+	if (ret)
+		return dev_err_probe(dev, ret, "Unable to init gpio-regmap\n");
+
+	return 0;
+}
+#else
+static int ad7173_gpio_init(struct ad7173_state *st)
+{
+	return 0;
+}
+#endif /* CONFIG_GPIOLIB */
+
+static struct ad7173_state *ad_sigma_delta_to_ad7173(struct ad_sigma_delta *sd)
+{
+	return container_of(sd, struct ad7173_state, sd);
+}
+
+static struct ad7173_state *clk_hw_to_ad7173(struct clk_hw *hw)
+{
+	return container_of(hw, struct ad7173_state, int_clk_hw);
+}
+
+static void ad7173_ida_destroy(void *data)
+{
+	struct ad7173_state *st = data;
+
+	ida_destroy(&st->cfg_slots_status);
+}
+
+static void ad7173_reset_usage_cnts(struct ad7173_state *st)
+{
+	memset64(st->config_cnts, 0, st->info->num_configs);
+	st->config_usage_counter = 0;
+}
+
+static struct ad7173_channel_config *
+ad7173_find_live_config(struct ad7173_state *st, struct ad7173_channel_config *cfg)
+{
+	struct ad7173_channel_config *cfg_aux;
+	ptrdiff_t cmp_size;
+	int i;
+
+	cmp_size = sizeof_field(struct ad7173_channel_config, config_props);
+	for (i = 0; i < st->num_channels; i++) {
+		cfg_aux = &st->channels[i].cfg;
+
+		if (cfg_aux->live &&
+		    !memcmp(&cfg->config_props, &cfg_aux->config_props, cmp_size))
+			return cfg_aux;
+	}
+	return NULL;
+}
+
+/* Could be replaced with a generic LRU implementation */
+static int ad7173_free_config_slot_lru(struct ad7173_state *st)
+{
+	int i, lru_position = 0;
+
+	for (i = 1; i < st->info->num_configs; i++)
+		if (st->config_cnts[i] < st->config_cnts[lru_position])
+			lru_position = i;
+
+	for (i = 0; i < st->num_channels; i++)
+		if (st->channels[i].cfg.cfg_slot == lru_position)
+			st->channels[i].cfg.live = false;
+
+	ida_free(&st->cfg_slots_status, lru_position);
+	return ida_alloc(&st->cfg_slots_status, GFP_KERNEL);
+}
+
+/* Could be replaced with a generic LRU implementation */
+static int ad7173_load_config(struct ad7173_state *st,
+			      struct ad7173_channel_config *cfg)
+{
+	unsigned int config;
+	int free_cfg_slot, ret;
+
+	free_cfg_slot = ida_alloc_range(&st->cfg_slots_status, 0,
+					st->info->num_configs - 1, GFP_KERNEL);
+	if (free_cfg_slot < 0)
+		free_cfg_slot = ad7173_free_config_slot_lru(st);
+
+	cfg->cfg_slot = free_cfg_slot;
+	config = FIELD_PREP(AD7173_SETUP_REF_SEL_MASK, cfg->ref_sel);
+
+	if (cfg->bipolar)
+		config |= AD7173_SETUP_BIPOLAR;
+
+	if (cfg->input_buf)
+		config |= AD7173_SETUP_AIN_BUF_MASK;
+
+	ret = ad_sd_write_reg(&st->sd, AD7173_REG_SETUP(free_cfg_slot), 2, config);
+	if (ret)
+		return ret;
+
+	return ad_sd_write_reg(&st->sd, AD7173_REG_FILTER(free_cfg_slot), 2,
+			       AD7173_FILTER_ODR0_MASK & cfg->odr);
+}
+
+static int ad7173_config_channel(struct ad7173_state *st, int addr)
+{
+	struct ad7173_channel_config *cfg = &st->channels[addr].cfg;
+	struct ad7173_channel_config *live_cfg;
+	int ret;
+
+	if (!cfg->live) {
+		live_cfg = ad7173_find_live_config(st, cfg);
+		if (live_cfg) {
+			cfg->cfg_slot = live_cfg->cfg_slot;
+		} else {
+			ret = ad7173_load_config(st, cfg);
+			if (ret)
+				return ret;
+			cfg->live = true;
+		}
+	}
+
+	if (st->config_usage_counter == U64_MAX)
+		ad7173_reset_usage_cnts(st);
+
+	st->config_usage_counter++;
+	st->config_cnts[cfg->cfg_slot] = st->config_usage_counter;
+
+	return 0;
+}
+
+static int ad7173_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
+{
+	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
+	unsigned int val;
+	int ret;
+
+	ret = ad7173_config_channel(st, channel);
+	if (ret)
+		return ret;
+
+	val = AD7173_CH_ENABLE |
+	      FIELD_PREP(AD7173_CH_SETUP_SEL_MASK, st->channels[channel].cfg.cfg_slot) |
+	      st->channels[channel].ain;
+
+	return ad_sd_write_reg(&st->sd, AD7173_REG_CH(channel), 2, val);
+}
+
+static int ad7173_set_mode(struct ad_sigma_delta *sd,
+			   enum ad_sigma_delta_mode mode)
+{
+	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
+
+	st->adc_mode &= ~AD7173_ADC_MODE_MODE_MASK;
+	st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_MODE_MASK, mode);
+
+	return ad_sd_write_reg(&st->sd, AD7173_REG_ADC_MODE, 2, st->adc_mode);
+}
+
+static int ad7173_append_status(struct ad_sigma_delta *sd, bool append)
+{
+	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
+	unsigned int interface_mode = st->interface_mode;
+	int ret;
+
+	interface_mode &= ~AD7173_INTERFACE_DATA_STAT;
+	interface_mode |= AD7173_INTERFACE_DATA_STAT_EN(append);
+	ret = ad_sd_write_reg(&st->sd, AD7173_REG_INTERFACE_MODE, 2, interface_mode);
+	if (ret)
+		return ret;
+
+	st->interface_mode = interface_mode;
+
+	return 0;
+}
+
+static int ad7173_disable_all(struct ad_sigma_delta *sd)
+{
+	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
+	int ret;
+	int i;
+
+	for (i = 0; i < st->num_channels; i++) {
+		ret = ad_sd_write_reg(sd, AD7173_REG_CH(i), 2, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct ad_sigma_delta_info ad7173_sigma_delta_info = {
+	.set_channel = ad7173_set_channel,
+	.append_status = ad7173_append_status,
+	.disable_all = ad7173_disable_all,
+	.set_mode = ad7173_set_mode,
+	.has_registers = true,
+	.addr_shift = 0,
+	.read_mask = BIT(6),
+	.status_ch_mask = GENMASK(3, 0),
+	.data_reg = AD7173_REG_DATA,
+};
+
+static int ad7173_setup(struct iio_dev *indio_dev)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct device *dev = &st->sd.spi->dev;
+	u8 buf[AD7173_RESET_LENGTH];
+	unsigned int id;
+	int ret;
+
+	/* reset the serial interface */
+	memset(buf, 0xff, AD7173_RESET_LENGTH);
+	ret = spi_write_then_read(st->sd.spi, buf, sizeof(buf), NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	/* datasheet recommends a delay of at least 500us after reset */
+	fsleep(500);
+
+	ret = ad_sd_read_reg(&st->sd, AD7173_REG_ID, 2, &id);
+	if (ret)
+		return ret;
+
+	id &= AD7173_ID_MASK;
+	if (id != st->info->id)
+		dev_warn(dev, "Unexpected device id: 0x%04X, expected: 0x%04X\n",
+			 id, st->info->id);
+
+	st->adc_mode |= AD7173_ADC_MODE_SING_CYC;
+	st->interface_mode = 0x0;
+
+	st->config_usage_counter = 0;
+	st->config_cnts = devm_kcalloc(dev, st->info->num_configs,
+				       sizeof(*st->config_cnts), GFP_KERNEL);
+	if (!st->config_cnts)
+		return -ENOMEM;
+
+	/* All channels are enabled by default after a reset */
+	return ad7173_disable_all(&st->sd);
+}
+
+static unsigned int ad7173_get_ref_voltage_milli(struct ad7173_state *st,
+						 u8 reference_select)
+{
+	int vref;
+
+	switch (reference_select) {
+	case AD7173_SETUP_REF_SEL_EXT_REF:
+		vref = regulator_get_voltage(st->regulators[0].consumer);
+		break;
+
+	case AD7173_SETUP_REF_SEL_EXT_REF2:
+		vref = regulator_get_voltage(st->regulators[1].consumer);
+		break;
+
+	case AD7173_SETUP_REF_SEL_INT_REF:
+		vref = AD7173_VOLTAGE_INT_REF_uV;
+		break;
+
+	case AD7173_SETUP_REF_SEL_AVDD1_AVSS:
+		vref = regulator_get_voltage(st->regulators[2].consumer);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (vref < 0)
+		return vref;
+
+	return vref / (MICRO / MILLI);
+}
+
+static int ad7173_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long info)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct ad7173_channel *ch = &st->channels[chan->address];
+	unsigned int reg;
+	u64 temp;
+	int ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		ret = ad_sigma_delta_single_conversion(indio_dev, chan, val);
+		if (ret < 0)
+			return ret;
+
+		/* disable channel after single conversion */
+		ret = ad_sd_write_reg(&st->sd, AD7173_REG_CH(chan->address), 2, 0);
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type == IIO_TEMP) {
+			temp = AD7173_VOLTAGE_INT_REF_uV * MILLI;
+			temp /= AD7173_TEMP_SENSIIVITY_uV_per_C;
+			*val = temp;
+			*val2 = chan->scan_type.realbits;
+		} else {
+			*val = ad7173_get_ref_voltage_milli(st, ch->cfg.ref_sel);
+			*val2 = chan->scan_type.realbits - !!(ch->cfg.bipolar);
+		}
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_OFFSET:
+		if (chan->type == IIO_TEMP) {
+			/* 0 Kelvin -> raw sample */
+			temp   = -ABSOLUTE_ZERO_MILLICELSIUS;
+			temp  *= AD7173_TEMP_SENSIIVITY_uV_per_C;
+			temp <<= chan->scan_type.realbits;
+			temp   = DIV_U64_ROUND_CLOSEST(temp,
+						       AD7173_VOLTAGE_INT_REF_uV *
+						       MILLI);
+			*val   = -temp;
+		} else {
+			*val = -BIT(chan->scan_type.realbits - 1);
+		}
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		reg = st->channels[chan->address].cfg.odr;
+
+		*val = st->info->sinc5_data_rates[reg] / MILLI;
+		*val2 = (st->info->sinc5_data_rates[reg] % MILLI) * (MICRO / MILLI);
+
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad7173_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long info)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct ad7173_channel_config *cfg;
+	unsigned int freq, i;
+	int ret;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		freq = val * MILLI + val2 / MILLI;
+		for (i = st->info->odr_start_value; i < st->info->num_sinc5_data_rates - 1; i++)
+			if (freq >= st->info->sinc5_data_rates[i])
+				break;
+
+		cfg = &st->channels[chan->address].cfg;
+		cfg->odr = i;
+		cfg->live = false;
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	iio_device_release_direct_mode(indio_dev);
+	return ret;
+}
+
+static int ad7173_update_scan_mode(struct iio_dev *indio_dev,
+				   const unsigned long *scan_mask)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	int i, ret;
+
+	for (i = 0; i < indio_dev->num_channels; i++) {
+		if (test_bit(i, scan_mask))
+			ret = ad7173_set_channel(&st->sd, i);
+		else
+			ret = ad_sd_write_reg(&st->sd, AD7173_REG_CH(i), 2, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ad7173_debug_reg_access(struct iio_dev *indio_dev, unsigned int reg,
+				   unsigned int writeval, unsigned int *readval)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	u8 reg_size;
+
+	if (reg == AD7173_REG_COMMS)
+		reg_size = 1;
+	else if (reg == AD7173_REG_CRC || reg == AD7173_REG_DATA ||
+		 reg >= AD7173_REG_OFFSET(0))
+		reg_size = 3;
+	else
+		reg_size = 2;
+
+	if (readval)
+		return ad_sd_read_reg(&st->sd, reg, reg_size, readval);
+
+	return ad_sd_write_reg(&st->sd, reg, reg_size, writeval);
+}
+
+static const struct iio_info ad7173_info = {
+	.read_raw = &ad7173_read_raw,
+	.write_raw = &ad7173_write_raw,
+	.debugfs_reg_access = &ad7173_debug_reg_access,
+	.validate_trigger = ad_sd_validate_trigger,
+	.update_scan_mode = ad7173_update_scan_mode,
+};
+
+static const struct iio_chan_spec ad7173_channel_template = {
+	.type = IIO_VOLTAGE,
+	.indexed = 1,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
+	.scan_type = {
+		.sign = 'u',
+		.realbits = 24,
+		.storagebits = 32,
+		.endianness = IIO_BE,
+	},
+};
+
+static const struct iio_chan_spec ad7173_temp_iio_channel_template = {
+	.type = IIO_TEMP,
+	.channel = AD7173_AIN_TEMP_POS,
+	.channel2 = AD7173_AIN_TEMP_NEG,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),
+	.scan_type = {
+		.sign = 'u',
+		.realbits = 24,
+		.storagebits = 32,
+		.endianness = IIO_BE,
+	},
+};
+
+static void ad7173_disable_regulators(void *data)
+{
+	struct ad7173_state *st = data;
+
+	regulator_bulk_disable(ARRAY_SIZE(st->regulators), st->regulators);
+}
+
+static void ad7173_clk_disable_unprepare(void *clk)
+{
+	clk_disable_unprepare(clk);
+}
+
+static unsigned long ad7173_sel_clk(struct ad7173_state *st,
+				    unsigned int clk_sel)
+{
+	int ret;
+
+	st->adc_mode &= ~AD7173_ADC_MODE_CLOCKSEL_MASK;
+	st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK, clk_sel);
+	ret = ad_sd_write_reg(&st->sd, AD7173_REG_ADC_MODE, 0x2, st->adc_mode);
+
+	return ret;
+}
+
+static unsigned long ad7173_clk_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct ad7173_state *st = clk_hw_to_ad7173(hw);
+
+	return st->info->clock / HZ_PER_KHZ;
+}
+
+static int ad7173_clk_output_is_enabled(struct clk_hw *hw)
+{
+	struct ad7173_state *st = clk_hw_to_ad7173(hw);
+	u32 clk_sel;
+
+	clk_sel = FIELD_GET(AD7173_ADC_MODE_CLOCKSEL_MASK, st->adc_mode);
+	return clk_sel == AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT;
+}
+
+static int ad7173_clk_output_prepare(struct clk_hw *hw)
+{
+	struct ad7173_state *st = clk_hw_to_ad7173(hw);
+
+	return ad7173_sel_clk(st, AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT);
+}
+
+static void ad7173_clk_output_unprepare(struct clk_hw *hw)
+{
+	struct ad7173_state *st = clk_hw_to_ad7173(hw);
+
+	ad7173_sel_clk(st, AD7173_ADC_MODE_CLOCKSEL_INT);
+}
+
+static const struct clk_ops ad7173_int_clk_ops = {
+	.recalc_rate = ad7173_clk_recalc_rate,
+	.is_enabled = ad7173_clk_output_is_enabled,
+	.prepare = ad7173_clk_output_prepare,
+	.unprepare = ad7173_clk_output_unprepare,
+};
+
+static int ad7173_register_clk_provider(struct iio_dev *indio_dev)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	struct clk_init_data init = {};
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_COMMON_CLK))
+		return 0;
+
+	init.name = fwnode_get_name(fwnode);
+	init.ops = &ad7173_int_clk_ops;
+
+	st->int_clk_hw.init = &init;
+	ret = devm_clk_hw_register(dev, &st->int_clk_hw);
+	if (ret)
+		return ret;
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+					   &st->int_clk_hw);
+}
+
+static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev)
+{
+	struct ad7173_channel *chans_st_arr, *chan_st_priv;
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
+	struct iio_chan_spec *chan_arr, *chan;
+	unsigned int ain[2], chan_index = 0;
+	int ref_sel, ret;
+
+	chan_arr = devm_kcalloc(dev, sizeof(*indio_dev->channels),
+				st->num_channels, GFP_KERNEL);
+	if (!chan_arr)
+		return -ENOMEM;
+
+	chans_st_arr = devm_kcalloc(dev, st->num_channels, sizeof(*st->channels),
+				    GFP_KERNEL);
+	if (!chans_st_arr)
+		return -ENOMEM;
+
+	indio_dev->channels = chan_arr;
+	st->channels = chans_st_arr;
+
+	if (st->info->has_temp) {
+		chan_arr[chan_index] = ad7173_temp_iio_channel_template;
+		chan_st_priv = &chans_st_arr[chan_index];
+		chan_st_priv->ain =
+			AD7173_CH_ADDRESS(chan_arr[chan_index].channel,
+					  chan_arr[chan_index].channel2);
+		chan_st_priv->cfg.bipolar = false;
+		chan_st_priv->cfg.input_buf = st->info->has_input_buf;
+		chan_st_priv->cfg.ref_sel = AD7173_SETUP_REF_SEL_INT_REF;
+		st->adc_mode |= AD7173_ADC_MODE_REF_EN;
+
+		chan_index++;
+	}
+
+	device_for_each_child_node_scoped(dev, child) {
+		chan = &chan_arr[chan_index];
+		chan_st_priv = &chans_st_arr[chan_index];
+		ret = fwnode_property_read_u32_array(child, "diff-channels",
+						     ain, ARRAY_SIZE(ain));
+		if (ret)
+			return ret;
+
+		if (ain[0] >= st->info->num_inputs ||
+		    ain[1] >= st->info->num_inputs)
+			return dev_err_probe(dev, -EINVAL,
+				"Input pin number out of range for pair (%d %d).\n",
+				ain[0], ain[1]);
+
+		ret = fwnode_property_match_property_string(child,
+							    "adi,reference-select",
+							    ad7173_ref_sel_str,
+							    ARRAY_SIZE(ad7173_ref_sel_str));
+		if (ret < 0)
+			ref_sel = AD7173_SETUP_REF_SEL_INT_REF;
+		else
+			ref_sel = ret;
+
+		if (ref_sel == AD7173_SETUP_REF_SEL_INT_REF &&
+		    !st->info->has_int_ref)
+			return dev_err_probe(dev, -EINVAL,
+				"Internal reference is not available on current model.\n");
+
+		if (ref_sel == AD7173_SETUP_REF_SEL_EXT_REF2 && !st->info->has_ref2)
+			return dev_err_probe(dev, -EINVAL,
+				"External reference 2 is not available on current model.\n");
+
+		ret = ad7173_get_ref_voltage_milli(st, ref_sel);
+		if (ret < 0)
+			return dev_err_probe(dev, ret,
+					     "Cannot use reference %u\n", ref_sel);
+
+		if (ref_sel == AD7173_SETUP_REF_SEL_INT_REF)
+			st->adc_mode |= AD7173_ADC_MODE_REF_EN;
+		chan_st_priv->cfg.ref_sel = ref_sel;
+
+		*chan = ad7173_channel_template;
+		chan->address = chan_index;
+		chan->scan_index = chan_index;
+		chan->channel = ain[0];
+		chan->channel2 = ain[1];
+		chan->differential = true;
+
+		chan_st_priv->ain = AD7173_CH_ADDRESS(ain[0], ain[1]);
+		chan_st_priv->chan_reg = chan_index;
+		chan_st_priv->cfg.input_buf = st->info->has_input_buf;
+		chan_st_priv->cfg.odr = 0;
+
+		chan_st_priv->cfg.bipolar = fwnode_property_read_bool(child, "bipolar");
+		if (chan_st_priv->cfg.bipolar)
+			chan->info_mask_separate |= BIT(IIO_CHAN_INFO_OFFSET);
+
+		chan_index++;
+	}
+	return 0;
+}
+
+static int ad7173_fw_parse_device_config(struct iio_dev *indio_dev)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
+	unsigned int num_channels;
+	int ret;
+
+	st->regulators[0].supply = ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_EXT_REF];
+	st->regulators[1].supply = ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_EXT_REF2];
+	st->regulators[2].supply = ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_AVDD1_AVSS];
+
+	/*
+	 * If a regulator is not available, it will be set to a dummy regulator.
+	 * Each channel reference is checked with regulator_get_voltage() before
+	 * setting attributes so if any channel uses a dummy supply the driver
+	 * probe will fail.
+	 */
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(st->regulators),
+				      st->regulators);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(st->regulators), st->regulators);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable regulators\n");
+
+	ret = devm_add_action_or_reset(dev, ad7173_disable_regulators, st);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to add regulators disable action\n");
+
+	ret = device_property_match_property_string(dev, "clock-names",
+						    ad7173_clk_sel,
+						    ARRAY_SIZE(ad7173_clk_sel));
+	if (ret < 0) {
+		st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK,
+					   AD7173_ADC_MODE_CLOCKSEL_INT);
+		ad7173_register_clk_provider(indio_dev);
+	} else {
+		st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK,
+					   AD7173_ADC_MODE_CLOCKSEL_EXT + ret);
+		st->ext_clk = devm_clk_get(dev, ad7173_clk_sel[ret]);
+		if (IS_ERR(st->ext_clk))
+			return dev_err_probe(dev, PTR_ERR(st->ext_clk),
+					     "Failed to get external clock\n");
+
+		ret = clk_prepare_enable(st->ext_clk);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to enable external clock\n");
+
+		ret = devm_add_action_or_reset(dev, ad7173_clk_disable_unprepare,
+					       st->ext_clk);
+		if (ret)
+			return ret;
+	}
+
+	ret = fwnode_irq_get_byname(dev_fwnode(dev), "rdy");
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Interrupt 'rdy' is required\n");
+
+	ad7173_sigma_delta_info.irq_line = ret;
+
+	num_channels = device_get_child_node_count(dev);
+
+	if (st->info->has_temp)
+		num_channels++;
+
+	if (num_channels == 0)
+		return dev_err_probe(dev, -ENODATA, "No channels specified\n");
+	indio_dev->num_channels = num_channels;
+	st->num_channels = num_channels;
+
+	return ad7173_fw_parse_channel_config(indio_dev);
+}
+
+static int ad7173_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct ad7173_state *st;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	st->info = spi_get_device_match_data(spi);
+	if (!st->info)
+		return -ENODEV;
+
+	ida_init(&st->cfg_slots_status);
+	ret = devm_add_action_or_reset(dev, ad7173_ida_destroy, st);
+	if (ret)
+		return ret;
+
+	indio_dev->name = st->info->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ad7173_info;
+
+	spi->mode = SPI_MODE_3;
+	spi_setup(spi);
+
+	ad7173_sigma_delta_info.num_slots = st->info->num_configs;
+	ret = ad_sd_init(&st->sd, indio_dev, spi, &ad7173_sigma_delta_info);
+	if (ret)
+		return ret;
+
+	ret = ad7173_fw_parse_device_config(indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_ad_sd_setup_buffer_and_trigger(dev, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = ad7173_setup(indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ret;
+
+	if (IS_ENABLED(CONFIG_GPIOLIB))
+		return ad7173_gpio_init(st);
+
+	return 0;
+}
+
+static const struct of_device_id ad7173_of_match[] = {
+	{ .compatible = "adi,ad7172-2",
+	  .data = &ad7173_device_info[ID_AD7172_2]},
+	{ .compatible = "adi,ad7172-4",
+	  .data = &ad7173_device_info[ID_AD7172_4]},
+	{ .compatible = "adi,ad7173-8",
+	  .data = &ad7173_device_info[ID_AD7173_8]},
+	{ .compatible = "adi,ad7175-2",
+	  .data = &ad7173_device_info[ID_AD7175_2]},
+	{ .compatible = "adi,ad7175-8",
+	  .data = &ad7173_device_info[ID_AD7175_8]},
+	{ .compatible = "adi,ad7176-2",
+	  .data = &ad7173_device_info[ID_AD7176_2]},
+	{ .compatible = "adi,ad7177-2",
+	  .data = &ad7173_device_info[ID_AD7177_2]},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad7173_of_match);
+
+static const struct spi_device_id ad7173_id_table[] = {
+	{ "ad7172-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7172_2]},
+	{ "ad7172-4", (kernel_ulong_t)&ad7173_device_info[ID_AD7172_4]},
+	{ "ad7173-8", (kernel_ulong_t)&ad7173_device_info[ID_AD7173_8]},
+	{ "ad7175-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7175_2]},
+	{ "ad7175-8", (kernel_ulong_t)&ad7173_device_info[ID_AD7175_8]},
+	{ "ad7176-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7176_2]},
+	{ "ad7177-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7177_2]},
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ad7173_id_table);
+
+static struct spi_driver ad7173_driver = {
+	.driver = {
+		.name	= "ad7173",
+		.of_match_table = ad7173_of_match,
+	},
+	.probe		= ad7173_probe,
+	.id_table	= ad7173_id_table,
+};
+module_spi_driver(ad7173_driver);
+
+MODULE_IMPORT_NS(IIO_AD_SIGMA_DELTA);
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafo.de>");
+MODULE_AUTHOR("Dumitru Ceclan <dumitru.ceclan@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7172/AD7173/AD7175/AD7176 ADC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index adc3cbe92d..7bcc7e2aa2 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -17,7 +17,9 @@
 #include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/delay.h>
-#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -364,19 +366,19 @@ static inline bool ad7192_valid_external_frequency(u32 freq)
 		freq <= AD7192_EXT_FREQ_MHZ_MAX);
 }
 
-static int ad7192_of_clock_select(struct ad7192_state *st)
+static int ad7192_clock_select(struct ad7192_state *st)
 {
-	struct device_node *np = st->sd.spi->dev.of_node;
+	struct device *dev = &st->sd.spi->dev;
 	unsigned int clock_sel;
 
 	clock_sel = AD7192_CLK_INT;
 
 	/* use internal clock */
 	if (!st->mclk) {
-		if (of_property_read_bool(np, "adi,int-clock-output-enable"))
+		if (device_property_read_bool(dev, "adi,int-clock-output-enable"))
 			clock_sel = AD7192_CLK_INT_CO;
 	} else {
-		if (of_property_read_bool(np, "adi,clock-xtal"))
+		if (device_property_read_bool(dev, "adi,clock-xtal"))
 			clock_sel = AD7192_CLK_EXT_MCLK1_2;
 		else
 			clock_sel = AD7192_CLK_EXT_MCLK2;
@@ -385,7 +387,7 @@ static int ad7192_of_clock_select(struct ad7192_state *st)
 	return clock_sel;
 }
 
-static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
+static int ad7192_setup(struct iio_dev *indio_dev, struct device *dev)
 {
 	struct ad7192_state *st = iio_priv(indio_dev);
 	bool rej60_en, refin2_en;
@@ -407,7 +409,7 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
 	id = FIELD_GET(AD7192_ID_MASK, id);
 
 	if (id != st->chip_info->chip_id)
-		dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X != 0x%X)\n",
+		dev_warn(dev, "device ID query failed (0x%X != 0x%X)\n",
 			 id, st->chip_info->chip_id);
 
 	st->mode = FIELD_PREP(AD7192_MODE_SEL_MASK, AD7192_MODE_IDLE) |
@@ -416,30 +418,30 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
 
 	st->conf = FIELD_PREP(AD7192_CONF_GAIN_MASK, 0);
 
-	rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable");
+	rej60_en = device_property_read_bool(dev, "adi,rejection-60-Hz-enable");
 	if (rej60_en)
 		st->mode |= AD7192_MODE_REJ60;
 
-	refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable");
+	refin2_en = device_property_read_bool(dev, "adi,refin2-pins-enable");
 	if (refin2_en && st->chip_info->chip_id != CHIPID_AD7195)
 		st->conf |= AD7192_CONF_REFSEL;
 
 	st->conf &= ~AD7192_CONF_CHOP;
 
-	buf_en = of_property_read_bool(np, "adi,buffer-enable");
+	buf_en = device_property_read_bool(dev, "adi,buffer-enable");
 	if (buf_en)
 		st->conf |= AD7192_CONF_BUF;
 
-	bipolar = of_property_read_bool(np, "bipolar");
+	bipolar = device_property_read_bool(dev, "bipolar");
 	if (!bipolar)
 		st->conf |= AD7192_CONF_UNIPOLAR;
 
-	burnout_curr_en = of_property_read_bool(np,
-						"adi,burnout-currents-enable");
+	burnout_curr_en = device_property_read_bool(dev,
+						    "adi,burnout-currents-enable");
 	if (burnout_curr_en && buf_en) {
 		st->conf |= AD7192_CONF_BURN;
 	} else if (burnout_curr_en) {
-		dev_warn(&st->sd.spi->dev,
+		dev_warn(dev,
 			 "Can't enable burnout currents: see CHOP or buffer\n");
 	}
 
@@ -1117,9 +1119,7 @@ static int ad7192_probe(struct spi_device *spi)
 	}
 	st->int_vref_mv = ret / 1000;
 
-	st->chip_info = of_device_get_match_data(&spi->dev);
-	if (!st->chip_info)
-		st->chip_info = (void *)spi_get_device_id(spi)->driver_data;
+	st->chip_info = spi_get_device_match_data(spi);
 	indio_dev->name = st->chip_info->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = st->chip_info->channels;
@@ -1140,7 +1140,7 @@ static int ad7192_probe(struct spi_device *spi)
 	if (IS_ERR(st->mclk))
 		return PTR_ERR(st->mclk);
 
-	st->clock_sel = ad7192_of_clock_select(st);
+	st->clock_sel = ad7192_clock_select(st);
 
 	if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
 	    st->clock_sel == AD7192_CLK_EXT_MCLK2) {
@@ -1152,7 +1152,7 @@ static int ad7192_probe(struct spi_device *spi)
 		}
 	}
 
-	ret = ad7192_setup(indio_dev, spi->dev.of_node);
+	ret = ad7192_setup(indio_dev, &spi->dev);
 	if (ret)
 		return ret;
 
diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
index 98648c679a..13ea8a1073 100644
--- a/drivers/iio/adc/ad7266.c
+++ b/drivers/iio/adc/ad7266.c
@@ -373,7 +373,6 @@ static void ad7266_init_channels(struct iio_dev *indio_dev)
 	indio_dev->channels = chan_info->channels;
 	indio_dev->num_channels = chan_info->num_channels;
 	indio_dev->available_scan_masks = chan_info->scan_masks;
-	indio_dev->masklength = chan_info->num_channels - 1;
 }
 
 static const char * const ad7266_gpio_labels[] = {
diff --git a/drivers/iio/adc/ad7292.c b/drivers/iio/adc/ad7292.c
index cccacec5db..6aadd14f45 100644
--- a/drivers/iio/adc/ad7292.c
+++ b/drivers/iio/adc/ad7292.c
@@ -8,7 +8,8 @@
 #include <linux/bitfield.h>
 #include <linux/device.h>
 #include <linux/module.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
 
@@ -260,7 +261,6 @@ static int ad7292_probe(struct spi_device *spi)
 {
 	struct ad7292_state *st;
 	struct iio_dev *indio_dev;
-	struct device_node *child;
 	bool diff_channels = false;
 	int ret;
 
@@ -305,12 +305,11 @@ static int ad7292_probe(struct spi_device *spi)
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &ad7292_info;
 
-	for_each_available_child_of_node(spi->dev.of_node, child) {
-		diff_channels = of_property_read_bool(child, "diff-channels");
-		if (diff_channels) {
-			of_node_put(child);
+	device_for_each_child_node_scoped(&spi->dev, child) {
+		diff_channels = fwnode_property_read_bool(child,
+							  "diff-channels");
+		if (diff_channels)
 			break;
-		}
 	}
 
 	if (diff_channels) {
diff --git a/drivers/iio/adc/ad7944.c b/drivers/iio/adc/ad7944.c
new file mode 100644
index 0000000000..4602ab5ed2
--- /dev/null
+++ b/drivers/iio/adc/ad7944.c
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices AD7944/85/86 PulSAR ADC family driver.
+ *
+ * Copyright 2024 Analog Devices, Inc.
+ * Copyright 2024 BayLibre, SAS
+ */
+
+#include <linux/align.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+#include <linux/string_helpers.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define AD7944_INTERNAL_REF_MV		4096
+
+struct ad7944_timing_spec {
+	/* Normal mode max conversion time (t_{CONV}). */
+	unsigned int conv_ns;
+	/* TURBO mode max conversion time (t_{CONV}). */
+	unsigned int turbo_conv_ns;
+};
+
+enum ad7944_spi_mode {
+	/* datasheet calls this "4-wire mode" */
+	AD7944_SPI_MODE_DEFAULT,
+	/* datasheet calls this "3-wire mode" (not related to SPI_3WIRE!) */
+	AD7944_SPI_MODE_SINGLE,
+	/* datasheet calls this "chain mode" */
+	AD7944_SPI_MODE_CHAIN,
+};
+
+/* maps adi,spi-mode property value to enum */
+static const char * const ad7944_spi_modes[] = {
+	[AD7944_SPI_MODE_DEFAULT] = "",
+	[AD7944_SPI_MODE_SINGLE] = "single",
+	[AD7944_SPI_MODE_CHAIN] = "chain",
+};
+
+struct ad7944_adc {
+	struct spi_device *spi;
+	enum ad7944_spi_mode spi_mode;
+	struct spi_transfer xfers[3];
+	struct spi_message msg;
+	void *chain_mode_buf;
+	/* Chip-specific timing specifications. */
+	const struct ad7944_timing_spec *timing_spec;
+	/* GPIO connected to CNV pin. */
+	struct gpio_desc *cnv;
+	/* Optional GPIO to enable turbo mode. */
+	struct gpio_desc *turbo;
+	/* Indicates TURBO is hard-wired to be always enabled. */
+	bool always_turbo;
+	/* Reference voltage (millivolts). */
+	unsigned int ref_mv;
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	struct {
+		union {
+			u16 u16;
+			u32 u32;
+		} raw;
+		u64 timestamp __aligned(8);
+	 } sample __aligned(IIO_DMA_MINALIGN);
+};
+
+/* quite time before CNV rising edge */
+#define T_QUIET_NS	20
+
+static const struct ad7944_timing_spec ad7944_timing_spec = {
+	.conv_ns = 420,
+	.turbo_conv_ns = 320,
+};
+
+static const struct ad7944_timing_spec ad7986_timing_spec = {
+	.conv_ns = 500,
+	.turbo_conv_ns = 400,
+};
+
+struct ad7944_chip_info {
+	const char *name;
+	const struct ad7944_timing_spec *timing_spec;
+	const struct iio_chan_spec channels[2];
+};
+
+/*
+ * AD7944_DEFINE_CHIP_INFO - Define a chip info structure for a specific chip
+ * @_name: The name of the chip
+ * @_ts: The timing specification for the chip
+ * @_bits: The number of bits in the conversion result
+ * @_diff: Whether the chip is true differential or not
+ */
+#define AD7944_DEFINE_CHIP_INFO(_name, _ts, _bits, _diff)		\
+static const struct ad7944_chip_info _name##_chip_info = {		\
+	.name = #_name,							\
+	.timing_spec = &_ts##_timing_spec,				\
+	.channels = {							\
+		{							\
+			.type = IIO_VOLTAGE,				\
+			.indexed = 1,					\
+			.differential = _diff,				\
+			.channel = 0,					\
+			.channel2 = _diff ? 1 : 0,			\
+			.scan_index = 0,				\
+			.scan_type.sign = _diff ? 's' : 'u',		\
+			.scan_type.realbits = _bits,			\
+			.scan_type.storagebits = _bits > 16 ? 32 : 16,	\
+			.scan_type.endianness = IIO_CPU,		\
+			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW)	\
+					| BIT(IIO_CHAN_INFO_SCALE),	\
+		},							\
+		IIO_CHAN_SOFT_TIMESTAMP(1),				\
+	},								\
+}
+
+/* pseudo-differential with ground sense */
+AD7944_DEFINE_CHIP_INFO(ad7944, ad7944, 14, 0);
+AD7944_DEFINE_CHIP_INFO(ad7985, ad7944, 16, 0);
+/* fully differential */
+AD7944_DEFINE_CHIP_INFO(ad7986, ad7986, 18, 1);
+
+static void ad7944_unoptimize_msg(void *msg)
+{
+	spi_unoptimize_message(msg);
+}
+
+static int ad7944_3wire_cs_mode_init_msg(struct device *dev, struct ad7944_adc *adc,
+					 const struct iio_chan_spec *chan)
+{
+	unsigned int t_conv_ns = adc->always_turbo ? adc->timing_spec->turbo_conv_ns
+						   : adc->timing_spec->conv_ns;
+	struct spi_transfer *xfers = adc->xfers;
+	int ret;
+
+	/*
+	 * NB: can get better performance from some SPI controllers if we use
+	 * the same bits_per_word in every transfer.
+	 */
+	xfers[0].bits_per_word = chan->scan_type.realbits;
+	/*
+	 * CS is tied to CNV and we need a low to high transition to start the
+	 * conversion, so place CNV low for t_QUIET to prepare for this.
+	 */
+	xfers[0].delay.value = T_QUIET_NS;
+	xfers[0].delay.unit = SPI_DELAY_UNIT_NSECS;
+
+	/*
+	 * CS has to be high for full conversion time to avoid triggering the
+	 * busy indication.
+	 */
+	xfers[1].cs_off = 1;
+	xfers[1].delay.value = t_conv_ns;
+	xfers[1].delay.unit = SPI_DELAY_UNIT_NSECS;
+	xfers[1].bits_per_word = chan->scan_type.realbits;
+
+	/* Then we can read the data during the acquisition phase */
+	xfers[2].rx_buf = &adc->sample.raw;
+	xfers[2].len = BITS_TO_BYTES(chan->scan_type.storagebits);
+	xfers[2].bits_per_word = chan->scan_type.realbits;
+
+	spi_message_init_with_transfers(&adc->msg, xfers, 3);
+
+	ret = spi_optimize_message(adc->spi, &adc->msg);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, ad7944_unoptimize_msg, &adc->msg);
+}
+
+static int ad7944_4wire_mode_init_msg(struct device *dev, struct ad7944_adc *adc,
+				      const struct iio_chan_spec *chan)
+{
+	unsigned int t_conv_ns = adc->always_turbo ? adc->timing_spec->turbo_conv_ns
+						   : adc->timing_spec->conv_ns;
+	struct spi_transfer *xfers = adc->xfers;
+	int ret;
+
+	/*
+	 * NB: can get better performance from some SPI controllers if we use
+	 * the same bits_per_word in every transfer.
+	 */
+	xfers[0].bits_per_word = chan->scan_type.realbits;
+	/*
+	 * CS has to be high for full conversion time to avoid triggering the
+	 * busy indication.
+	 */
+	xfers[0].cs_off = 1;
+	xfers[0].delay.value = t_conv_ns;
+	xfers[0].delay.unit = SPI_DELAY_UNIT_NSECS;
+
+	xfers[1].rx_buf = &adc->sample.raw;
+	xfers[1].len = BITS_TO_BYTES(chan->scan_type.storagebits);
+	xfers[1].bits_per_word = chan->scan_type.realbits;
+
+	spi_message_init_with_transfers(&adc->msg, xfers, 2);
+
+	ret = spi_optimize_message(adc->spi, &adc->msg);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, ad7944_unoptimize_msg, &adc->msg);
+}
+
+static int ad7944_chain_mode_init_msg(struct device *dev, struct ad7944_adc *adc,
+				      const struct iio_chan_spec *chan,
+				      u32 n_chain_dev)
+{
+	struct spi_transfer *xfers = adc->xfers;
+	int ret;
+
+	/*
+	 * NB: SCLK has to be low before we toggle CS to avoid triggering the
+	 * busy indication.
+	 */
+	if (adc->spi->mode & SPI_CPOL)
+		return dev_err_probe(dev, -EINVAL,
+				     "chain mode requires ~SPI_CPOL\n");
+
+	/*
+	 * We only support CNV connected to CS in chain mode and we need CNV
+	 * to be high during the transfer to trigger the conversion.
+	 */
+	if (!(adc->spi->mode & SPI_CS_HIGH))
+		return dev_err_probe(dev, -EINVAL,
+				     "chain mode requires SPI_CS_HIGH\n");
+
+	/* CNV has to be high for full conversion time before reading data. */
+	xfers[0].delay.value = adc->timing_spec->conv_ns;
+	xfers[0].delay.unit = SPI_DELAY_UNIT_NSECS;
+
+	xfers[1].rx_buf = adc->chain_mode_buf;
+	xfers[1].len = BITS_TO_BYTES(chan->scan_type.storagebits) * n_chain_dev;
+	xfers[1].bits_per_word = chan->scan_type.realbits;
+
+	spi_message_init_with_transfers(&adc->msg, xfers, 2);
+
+	ret = spi_optimize_message(adc->spi, &adc->msg);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, ad7944_unoptimize_msg, &adc->msg);
+}
+
+/**
+ * ad7944_convert_and_acquire - Perform a single conversion and acquisition
+ * @adc: The ADC device structure
+ * @chan: The channel specification
+ * Return: 0 on success, a negative error code on failure
+ *
+ * Perform a conversion and acquisition of a single sample using the
+ * pre-optimized adc->msg.
+ *
+ * Upon successful return adc->sample.raw will contain the conversion result
+ * (or adc->chain_mode_buf if the device is using chain mode).
+ */
+static int ad7944_convert_and_acquire(struct ad7944_adc *adc,
+				      const struct iio_chan_spec *chan)
+{
+	int ret;
+
+	/*
+	 * In 4-wire mode, the CNV line is held high for the entire conversion
+	 * and acquisition process. In other modes adc->cnv is NULL and is
+	 * ignored (CS is wired to CNV in those cases).
+	 */
+	gpiod_set_value_cansleep(adc->cnv, 1);
+	ret = spi_sync(adc->spi, &adc->msg);
+	gpiod_set_value_cansleep(adc->cnv, 0);
+
+	return ret;
+}
+
+static int ad7944_single_conversion(struct ad7944_adc *adc,
+				    const struct iio_chan_spec *chan,
+				    int *val)
+{
+	int ret;
+
+	ret = ad7944_convert_and_acquire(adc, chan);
+	if (ret)
+		return ret;
+
+	if (adc->spi_mode == AD7944_SPI_MODE_CHAIN) {
+		if (chan->scan_type.storagebits > 16)
+			*val = ((u32 *)adc->chain_mode_buf)[chan->scan_index];
+		else
+			*val = ((u16 *)adc->chain_mode_buf)[chan->scan_index];
+	} else {
+		if (chan->scan_type.storagebits > 16)
+			*val = adc->sample.raw.u32;
+		else
+			*val = adc->sample.raw.u16;
+	}
+
+	if (chan->scan_type.sign == 's')
+		*val = sign_extend32(*val, chan->scan_type.realbits - 1);
+
+	return IIO_VAL_INT;
+}
+
+static int ad7944_read_raw(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan,
+			   int *val, int *val2, long info)
+{
+	struct ad7944_adc *adc = iio_priv(indio_dev);
+	int ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = ad7944_single_conversion(adc, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			*val = adc->ref_mv;
+
+			if (chan->scan_type.sign == 's')
+				*val2 = chan->scan_type.realbits - 1;
+			else
+				*val2 = chan->scan_type.realbits;
+
+			return IIO_VAL_FRACTIONAL_LOG2;
+		default:
+			return -EINVAL;
+		}
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ad7944_iio_info = {
+	.read_raw = &ad7944_read_raw,
+};
+
+static irqreturn_t ad7944_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ad7944_adc *adc = iio_priv(indio_dev);
+	int ret;
+
+	ret = ad7944_convert_and_acquire(adc, &indio_dev->channels[0]);
+	if (ret)
+		goto out;
+
+	if (adc->spi_mode == AD7944_SPI_MODE_CHAIN)
+		iio_push_to_buffers_with_timestamp(indio_dev, adc->chain_mode_buf,
+						   pf->timestamp);
+	else
+		iio_push_to_buffers_with_timestamp(indio_dev, &adc->sample.raw,
+						   pf->timestamp);
+
+out:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ad7944_chain_mode_alloc - allocate and initialize channel specs and buffers
+ *                           for daisy-chained devices
+ * @dev: The device for devm_ functions
+ * @chan_template: The channel template for the devices (array of 2 channels
+ *                 voltage and timestamp)
+ * @n_chain_dev: The number of devices in the chain
+ * @chain_chan: Pointer to receive the allocated channel specs
+ * @chain_mode_buf: Pointer to receive the allocated rx buffer
+ * @chain_scan_masks: Pointer to receive the allocated scan masks
+ * Return: 0 on success, a negative error code on failure
+ */
+static int ad7944_chain_mode_alloc(struct device *dev,
+				   const struct iio_chan_spec *chan_template,
+				   u32 n_chain_dev,
+				   struct iio_chan_spec **chain_chan,
+				   void **chain_mode_buf,
+				   unsigned long **chain_scan_masks)
+{
+	struct iio_chan_spec *chan;
+	size_t chain_mode_buf_size;
+	unsigned long *scan_masks;
+	void *buf;
+	int i;
+
+	/* 1 channel for each device in chain plus 1 for soft timestamp */
+
+	chan = devm_kcalloc(dev, n_chain_dev + 1, sizeof(*chan), GFP_KERNEL);
+	if (!chan)
+		return -ENOMEM;
+
+	for (i = 0; i < n_chain_dev; i++) {
+		chan[i] = chan_template[0];
+
+		if (chan_template[0].differential) {
+			chan[i].channel = 2 * i;
+			chan[i].channel2 = 2 * i + 1;
+		} else {
+			chan[i].channel = i;
+		}
+
+		chan[i].scan_index = i;
+	}
+
+	/* soft timestamp */
+	chan[i] = chan_template[1];
+	chan[i].scan_index = i;
+
+	*chain_chan = chan;
+
+	/* 1 word for each voltage channel + aligned u64 for timestamp */
+
+	chain_mode_buf_size = ALIGN(n_chain_dev *
+		BITS_TO_BYTES(chan[0].scan_type.storagebits), sizeof(u64))
+		+ sizeof(u64);
+	buf = devm_kzalloc(dev, chain_mode_buf_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	*chain_mode_buf = buf;
+
+	/*
+	 * Have to limit n_chain_dev due to current implementation of
+	 * available_scan_masks.
+	 */
+	if (n_chain_dev > BITS_PER_LONG)
+		return dev_err_probe(dev, -EINVAL,
+				     "chain is limited to 32 devices\n");
+
+	scan_masks = devm_kcalloc(dev, 2, sizeof(*scan_masks), GFP_KERNEL);
+	if (!scan_masks)
+		return -ENOMEM;
+
+	/*
+	 * Scan mask is needed since we always have to read all devices in the
+	 * chain in one SPI transfer.
+	 */
+	scan_masks[0] = GENMASK(n_chain_dev - 1, 0);
+
+	*chain_scan_masks = scan_masks;
+
+	return 0;
+}
+
+static const char * const ad7944_power_supplies[] = {
+	"avdd",	"dvdd",	"bvdd", "vio"
+};
+
+static void ad7944_ref_disable(void *ref)
+{
+	regulator_disable(ref);
+}
+
+static int ad7944_probe(struct spi_device *spi)
+{
+	const struct ad7944_chip_info *chip_info;
+	struct device *dev = &spi->dev;
+	struct iio_dev *indio_dev;
+	struct ad7944_adc *adc;
+	bool have_refin = false;
+	struct regulator *ref;
+	struct iio_chan_spec *chain_chan;
+	unsigned long *chain_scan_masks;
+	u32 n_chain_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+
+	chip_info = spi_get_device_match_data(spi);
+	if (!chip_info)
+		return dev_err_probe(dev, -EINVAL, "no chip info\n");
+
+	adc->timing_spec = chip_info->timing_spec;
+
+	ret = device_property_match_property_string(dev, "adi,spi-mode",
+						    ad7944_spi_modes,
+						    ARRAY_SIZE(ad7944_spi_modes));
+	/* absence of adi,spi-mode property means default mode */
+	if (ret == -EINVAL)
+		adc->spi_mode = AD7944_SPI_MODE_DEFAULT;
+	else if (ret < 0)
+		return dev_err_probe(dev, ret,
+				     "getting adi,spi-mode property failed\n");
+	else
+		adc->spi_mode = ret;
+
+	/*
+	 * Some chips use unusual word sizes, so check now instead of waiting
+	 * for the first xfer.
+	 */
+	if (!spi_is_bpw_supported(spi, chip_info->channels[0].scan_type.realbits))
+		return dev_err_probe(dev, -EINVAL,
+				"SPI host does not support %d bits per word\n",
+				chip_info->channels[0].scan_type.realbits);
+
+	ret = devm_regulator_bulk_get_enable(dev,
+					     ARRAY_SIZE(ad7944_power_supplies),
+					     ad7944_power_supplies);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to get and enable supplies\n");
+
+	/*
+	 * Sort out what is being used for the reference voltage. Options are:
+	 * - internal reference: neither REF or REFIN is connected
+	 * - internal reference with external buffer: REF not connected, REFIN
+	 *   is connected
+	 * - external reference: REF is connected, REFIN is not connected
+	 */
+
+	ref = devm_regulator_get_optional(dev, "ref");
+	if (IS_ERR(ref)) {
+		if (PTR_ERR(ref) != -ENODEV)
+			return dev_err_probe(dev, PTR_ERR(ref),
+					     "failed to get REF supply\n");
+
+		ref = NULL;
+	}
+
+	ret = devm_regulator_get_enable_optional(dev, "refin");
+	if (ret == 0)
+		have_refin = true;
+	else if (ret != -ENODEV)
+		return dev_err_probe(dev, ret,
+				     "failed to get and enable REFIN supply\n");
+
+	if (have_refin && ref)
+		return dev_err_probe(dev, -EINVAL,
+				     "cannot have both refin and ref supplies\n");
+
+	if (ref) {
+		ret = regulator_enable(ref);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "failed to enable REF supply\n");
+
+		ret = devm_add_action_or_reset(dev, ad7944_ref_disable, ref);
+		if (ret)
+			return ret;
+
+		ret = regulator_get_voltage(ref);
+		if (ret < 0)
+			return dev_err_probe(dev, ret,
+					     "failed to get REF voltage\n");
+
+		/* external reference */
+		adc->ref_mv = ret / 1000;
+	} else {
+		/* internal reference */
+		adc->ref_mv = AD7944_INTERNAL_REF_MV;
+	}
+
+	adc->cnv = devm_gpiod_get_optional(dev, "cnv", GPIOD_OUT_LOW);
+	if (IS_ERR(adc->cnv))
+		return dev_err_probe(dev, PTR_ERR(adc->cnv),
+				     "failed to get CNV GPIO\n");
+
+	if (!adc->cnv && adc->spi_mode == AD7944_SPI_MODE_DEFAULT)
+		return dev_err_probe(&spi->dev, -EINVAL, "CNV GPIO is required\n");
+	if (adc->cnv && adc->spi_mode != AD7944_SPI_MODE_DEFAULT)
+		return dev_err_probe(&spi->dev, -EINVAL,
+				     "CNV GPIO in single and chain mode is not currently supported\n");
+
+	adc->turbo = devm_gpiod_get_optional(dev, "turbo", GPIOD_OUT_LOW);
+	if (IS_ERR(adc->turbo))
+		return dev_err_probe(dev, PTR_ERR(adc->turbo),
+				     "failed to get TURBO GPIO\n");
+
+	adc->always_turbo = device_property_present(dev, "adi,always-turbo");
+
+	if (adc->turbo && adc->always_turbo)
+		return dev_err_probe(dev, -EINVAL,
+			"cannot have both turbo-gpios and adi,always-turbo\n");
+
+	if (adc->spi_mode == AD7944_SPI_MODE_CHAIN && adc->always_turbo)
+		return dev_err_probe(dev, -EINVAL,
+			"cannot have both chain mode and always turbo\n");
+
+	switch (adc->spi_mode) {
+	case AD7944_SPI_MODE_DEFAULT:
+		ret = ad7944_4wire_mode_init_msg(dev, adc, &chip_info->channels[0]);
+		if (ret)
+			return ret;
+
+		break;
+	case AD7944_SPI_MODE_SINGLE:
+		ret = ad7944_3wire_cs_mode_init_msg(dev, adc, &chip_info->channels[0]);
+		if (ret)
+			return ret;
+
+		break;
+	case AD7944_SPI_MODE_CHAIN:
+		ret = device_property_read_u32(dev, "#daisy-chained-devices",
+					       &n_chain_dev);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					"failed to get #daisy-chained-devices\n");
+
+		ret = ad7944_chain_mode_alloc(dev, chip_info->channels,
+					      n_chain_dev, &chain_chan,
+					      &adc->chain_mode_buf,
+					      &chain_scan_masks);
+		if (ret)
+			return ret;
+
+		ret = ad7944_chain_mode_init_msg(dev, adc, &chain_chan[0],
+						 n_chain_dev);
+		if (ret)
+			return ret;
+
+		break;
+	}
+
+	indio_dev->name = chip_info->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ad7944_iio_info;
+
+	if (adc->spi_mode == AD7944_SPI_MODE_CHAIN) {
+		indio_dev->available_scan_masks = chain_scan_masks;
+		indio_dev->channels = chain_chan;
+		indio_dev->num_channels = n_chain_dev + 1;
+	} else {
+		indio_dev->channels = chip_info->channels;
+		indio_dev->num_channels = ARRAY_SIZE(chip_info->channels);
+	}
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					      iio_pollfunc_store_time,
+					      ad7944_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id ad7944_of_match[] = {
+	{ .compatible = "adi,ad7944", .data = &ad7944_chip_info },
+	{ .compatible = "adi,ad7985", .data = &ad7985_chip_info },
+	{ .compatible = "adi,ad7986", .data = &ad7986_chip_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad7944_of_match);
+
+static const struct spi_device_id ad7944_spi_id[] = {
+	{ "ad7944", (kernel_ulong_t)&ad7944_chip_info },
+	{ "ad7985", (kernel_ulong_t)&ad7985_chip_info },
+	{ "ad7986", (kernel_ulong_t)&ad7986_chip_info },
+	{ }
+
+};
+MODULE_DEVICE_TABLE(spi, ad7944_spi_id);
+
+static struct spi_driver ad7944_driver = {
+	.driver = {
+		.name = "ad7944",
+		.of_match_table = ad7944_of_match,
+	},
+	.probe = ad7944_probe,
+	.id_table = ad7944_spi_id,
+};
+module_spi_driver(ad7944_driver);
+
+MODULE_AUTHOR("David Lechner <dlechner@baylibre.com>");
+MODULE_DESCRIPTION("Analog Devices AD7944 PulSAR ADC family driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index b757cc45c4..0f0dcd9ca6 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -128,7 +128,7 @@ struct ad799x_state {
 	struct regulator		*vref;
 	/* lock to protect against multiple access to the device */
 	struct mutex			lock;
-	unsigned			id;
+	unsigned int			id;
 	u16				config;
 
 	u8				*rx_buf;
@@ -253,7 +253,7 @@ static int ad799x_update_scan_mode(struct iio_dev *indio_dev,
 	}
 }
 
-static int ad799x_scan_direct(struct ad799x_state *st, unsigned ch)
+static int ad799x_scan_direct(struct ad799x_state *st, unsigned int ch)
 {
 	u8 cmd;
 
@@ -335,6 +335,7 @@ static ssize_t ad799x_read_frequency(struct device *dev,
 	struct ad799x_state *st = iio_priv(indio_dev);
 
 	int ret = i2c_smbus_read_byte_data(st->client, AD7998_CYCLE_TMR_REG);
+
 	if (ret < 0)
 		return ret;
 
@@ -523,7 +524,7 @@ done:
 	return IRQ_HANDLED;
 }
 
-static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+static IIO_DEV_ATTR_SAMP_FREQ(0644,
 			      ad799x_read_frequency,
 			      ad799x_write_frequency);
 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("15625 7812 3906 1953 976 488 244 0");
diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
index 13e1bba45b..1fd2211e29 100644
--- a/drivers/iio/adc/ad9467.c
+++ b/drivers/iio/adc/ad9467.c
@@ -4,7 +4,11 @@
  *
  * Copyright 2012-2020 Analog Devices Inc.
  */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
 #include <linux/cleanup.h>
+#include <linux/debugfs.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/device.h>
@@ -100,6 +104,8 @@
 #define AD9467_DEF_OUTPUT_MODE		0x08
 #define AD9467_REG_VREF_MASK		0x0F
 
+#define AD9647_MAX_TEST_POINTS		32
+
 struct ad9467_chip_info {
 	const char		*name;
 	unsigned int		id;
@@ -110,6 +116,9 @@ struct ad9467_chip_info {
 	unsigned long		max_rate;
 	unsigned int		default_output_mode;
 	unsigned int		vref_mask;
+	unsigned int		num_lanes;
+	/* data clock output */
+	bool			has_dco;
 };
 
 struct ad9467_state {
@@ -119,13 +128,23 @@ struct ad9467_state {
 	struct clk			*clk;
 	unsigned int			output_mode;
 	unsigned int                    (*scales)[2];
-
+	/*
+	 * Times 2 because we may also invert the signal polarity and run the
+	 * calibration again. For some reference on the test points (ad9265) see:
+	 * https://www.analog.com/media/en/technical-documentation/data-sheets/ad9265.pdf
+	 * at page 38 for the dco output delay. On devices as ad9467, the
+	 * calibration is done at the backend level. For the ADI axi-adc:
+	 * https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+	 * at the io delay control section.
+	 */
+	DECLARE_BITMAP(calib_map, AD9647_MAX_TEST_POINTS * 2);
 	struct gpio_desc		*pwrdown_gpio;
 	/* ensure consistent state obtained on multiple related accesses */
 	struct mutex			lock;
+	u8				buf[3] __aligned(IIO_DMA_MINALIGN);
 };
 
-static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
+static int ad9467_spi_read(struct ad9467_state *st, unsigned int reg)
 {
 	unsigned char tbuf[2], rbuf[1];
 	int ret;
@@ -133,7 +152,7 @@ static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
 	tbuf[0] = 0x80 | (reg >> 8);
 	tbuf[1] = reg & 0xFF;
 
-	ret = spi_write_then_read(spi,
+	ret = spi_write_then_read(st->spi,
 				  tbuf, ARRAY_SIZE(tbuf),
 				  rbuf, ARRAY_SIZE(rbuf));
 
@@ -143,35 +162,32 @@ static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
 	return rbuf[0];
 }
 
-static int ad9467_spi_write(struct spi_device *spi, unsigned int reg,
+static int ad9467_spi_write(struct ad9467_state *st, unsigned int reg,
 			    unsigned int val)
 {
-	unsigned char buf[3];
-
-	buf[0] = reg >> 8;
-	buf[1] = reg & 0xFF;
-	buf[2] = val;
+	st->buf[0] = reg >> 8;
+	st->buf[1] = reg & 0xFF;
+	st->buf[2] = val;
 
-	return spi_write(spi, buf, ARRAY_SIZE(buf));
+	return spi_write(st->spi, st->buf, ARRAY_SIZE(st->buf));
 }
 
 static int ad9467_reg_access(struct iio_dev *indio_dev, unsigned int reg,
 			     unsigned int writeval, unsigned int *readval)
 {
 	struct ad9467_state *st = iio_priv(indio_dev);
-	struct spi_device *spi = st->spi;
 	int ret;
 
 	if (!readval) {
 		guard(mutex)(&st->lock);
-		ret = ad9467_spi_write(spi, reg, writeval);
+		ret = ad9467_spi_write(st, reg, writeval);
 		if (ret)
 			return ret;
-		return ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
+		return ad9467_spi_write(st, AN877_ADC_REG_TRANSFER,
 					AN877_ADC_TRANSFER_SYNC);
 	}
 
-	ret = ad9467_spi_read(spi, reg);
+	ret = ad9467_spi_read(st, reg);
 	if (ret < 0)
 		return ret;
 	*readval = ret;
@@ -242,6 +258,7 @@ static const struct ad9467_chip_info ad9467_chip_tbl = {
 	.num_channels = ARRAY_SIZE(ad9467_channels),
 	.default_output_mode = AD9467_DEF_OUTPUT_MODE,
 	.vref_mask = AD9467_REG_VREF_MASK,
+	.num_lanes = 8,
 };
 
 static const struct ad9467_chip_info ad9434_chip_tbl = {
@@ -254,6 +271,7 @@ static const struct ad9467_chip_info ad9434_chip_tbl = {
 	.num_channels = ARRAY_SIZE(ad9434_channels),
 	.default_output_mode = AD9434_DEF_OUTPUT_MODE,
 	.vref_mask = AD9434_REG_VREF_MASK,
+	.num_lanes = 6,
 };
 
 static const struct ad9467_chip_info ad9265_chip_tbl = {
@@ -266,6 +284,7 @@ static const struct ad9467_chip_info ad9265_chip_tbl = {
 	.num_channels = ARRAY_SIZE(ad9467_channels),
 	.default_output_mode = AD9265_DEF_OUTPUT_MODE,
 	.vref_mask = AD9265_REG_VREF_MASK,
+	.has_dco = true,
 };
 
 static int ad9467_get_scale(struct ad9467_state *st, int *val, int *val2)
@@ -274,7 +293,7 @@ static int ad9467_get_scale(struct ad9467_state *st, int *val, int *val2)
 	unsigned int i, vref_val;
 	int ret;
 
-	ret = ad9467_spi_read(st->spi, AN877_ADC_REG_VREF);
+	ret = ad9467_spi_read(st, AN877_ADC_REG_VREF);
 	if (ret < 0)
 		return ret;
 
@@ -309,18 +328,257 @@ static int ad9467_set_scale(struct ad9467_state *st, int val, int val2)
 			continue;
 
 		guard(mutex)(&st->lock);
-		ret = ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
+		ret = ad9467_spi_write(st, AN877_ADC_REG_VREF,
 				       info->scale_table[i][1]);
 		if (ret < 0)
 			return ret;
 
-		return ad9467_spi_write(st->spi, AN877_ADC_REG_TRANSFER,
+		return ad9467_spi_write(st, AN877_ADC_REG_TRANSFER,
 					AN877_ADC_TRANSFER_SYNC);
 	}
 
 	return -EINVAL;
 }
 
+static int ad9467_outputmode_set(struct ad9467_state *st, unsigned int mode)
+{
+	int ret;
+
+	ret = ad9467_spi_write(st, AN877_ADC_REG_OUTPUT_MODE, mode);
+	if (ret < 0)
+		return ret;
+
+	return ad9467_spi_write(st, AN877_ADC_REG_TRANSFER,
+				AN877_ADC_TRANSFER_SYNC);
+}
+
+static int ad9647_calibrate_prepare(struct ad9467_state *st)
+{
+	struct iio_backend_data_fmt data = {
+		.enable = false,
+	};
+	unsigned int c;
+	int ret;
+
+	ret = ad9467_spi_write(st, AN877_ADC_REG_TEST_IO,
+			       AN877_ADC_TESTMODE_PN9_SEQ);
+	if (ret)
+		return ret;
+
+	ret = ad9467_spi_write(st, AN877_ADC_REG_TRANSFER,
+			       AN877_ADC_TRANSFER_SYNC);
+	if (ret)
+		return ret;
+
+	ret = ad9467_outputmode_set(st, st->info->default_output_mode);
+	if (ret)
+		return ret;
+
+	for (c = 0; c < st->info->num_channels; c++) {
+		ret = iio_backend_data_format_set(st->back, c, &data);
+		if (ret)
+			return ret;
+	}
+
+	ret = iio_backend_test_pattern_set(st->back, 0,
+					   IIO_BACKEND_ADI_PRBS_9A);
+	if (ret)
+		return ret;
+
+	return iio_backend_chan_enable(st->back, 0);
+}
+
+static int ad9647_calibrate_polarity_set(struct ad9467_state *st,
+					 bool invert)
+{
+	enum iio_backend_sample_trigger trigger;
+
+	if (st->info->has_dco) {
+		unsigned int phase = AN877_ADC_OUTPUT_EVEN_ODD_MODE_EN;
+
+		if (invert)
+			phase |= AN877_ADC_INVERT_DCO_CLK;
+
+		return ad9467_spi_write(st, AN877_ADC_REG_OUTPUT_PHASE,
+					phase);
+	}
+
+	if (invert)
+		trigger = IIO_BACKEND_SAMPLE_TRIGGER_EDGE_FALLING;
+	else
+		trigger = IIO_BACKEND_SAMPLE_TRIGGER_EDGE_RISING;
+
+	return iio_backend_data_sample_trigger(st->back, trigger);
+}
+
+/*
+ * The idea is pretty simple. Find the max number of successful points in a row
+ * and get the one in the middle.
+ */
+static unsigned int ad9467_find_optimal_point(const unsigned long *calib_map,
+					      unsigned int start,
+					      unsigned int nbits,
+					      unsigned int *val)
+{
+	unsigned int bit = start, end, start_cnt, cnt = 0;
+
+	for_each_clear_bitrange_from(bit, end, calib_map, nbits + start) {
+		if (end - bit > cnt) {
+			cnt = end - bit;
+			start_cnt = bit;
+		}
+	}
+
+	if (cnt)
+		*val = start_cnt + cnt / 2;
+
+	return cnt;
+}
+
+static int ad9467_calibrate_apply(struct ad9467_state *st, unsigned int val)
+{
+	unsigned int lane;
+	int ret;
+
+	if (st->info->has_dco) {
+		ret = ad9467_spi_write(st, AN877_ADC_REG_OUTPUT_DELAY,
+				       val);
+		if (ret)
+			return ret;
+
+		return ad9467_spi_write(st, AN877_ADC_REG_TRANSFER,
+					AN877_ADC_TRANSFER_SYNC);
+	}
+
+	for (lane = 0; lane < st->info->num_lanes; lane++) {
+		ret = iio_backend_iodelay_set(st->back, lane, val);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ad9647_calibrate_stop(struct ad9467_state *st)
+{
+	struct iio_backend_data_fmt data = {
+		.sign_extend = true,
+		.enable = true,
+	};
+	unsigned int c, mode;
+	int ret;
+
+	ret = iio_backend_chan_disable(st->back, 0);
+	if (ret)
+		return ret;
+
+	ret = iio_backend_test_pattern_set(st->back, 0,
+					   IIO_BACKEND_NO_TEST_PATTERN);
+	if (ret)
+		return ret;
+
+	for (c = 0; c < st->info->num_channels; c++) {
+		ret = iio_backend_data_format_set(st->back, c, &data);
+		if (ret)
+			return ret;
+	}
+
+	mode = st->info->default_output_mode | AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
+	ret = ad9467_outputmode_set(st, mode);
+	if (ret)
+		return ret;
+
+	ret = ad9467_spi_write(st, AN877_ADC_REG_TEST_IO,
+			       AN877_ADC_TESTMODE_OFF);
+	if (ret)
+		return ret;
+
+	return ad9467_spi_write(st, AN877_ADC_REG_TRANSFER,
+			       AN877_ADC_TRANSFER_SYNC);
+}
+
+static int ad9467_calibrate(struct ad9467_state *st)
+{
+	unsigned int point, val, inv_val, cnt, inv_cnt = 0;
+	/*
+	 * Half of the bitmap is for the inverted signal. The number of test
+	 * points is the same though...
+	 */
+	unsigned int test_points = AD9647_MAX_TEST_POINTS;
+	unsigned long sample_rate = clk_get_rate(st->clk);
+	struct device *dev = &st->spi->dev;
+	bool invert = false, stat;
+	int ret;
+
+	/* all points invalid */
+	bitmap_fill(st->calib_map, BITS_PER_TYPE(st->calib_map));
+
+	ret = ad9647_calibrate_prepare(st);
+	if (ret)
+		return ret;
+retune:
+	ret = ad9647_calibrate_polarity_set(st, invert);
+	if (ret)
+		return ret;
+
+	for (point = 0; point < test_points; point++) {
+		ret = ad9467_calibrate_apply(st, point);
+		if (ret)
+			return ret;
+
+		ret = iio_backend_chan_status(st->back, 0, &stat);
+		if (ret)
+			return ret;
+
+		__assign_bit(point + invert * test_points, st->calib_map, stat);
+	}
+
+	if (!invert) {
+		cnt = ad9467_find_optimal_point(st->calib_map, 0, test_points,
+						&val);
+		/*
+		 * We're happy if we find, at least, three good test points in
+		 * a row.
+		 */
+		if (cnt < 3) {
+			invert = true;
+			goto retune;
+		}
+	} else {
+		inv_cnt = ad9467_find_optimal_point(st->calib_map, test_points,
+						    test_points, &inv_val);
+		if (!inv_cnt && !cnt)
+			return -EIO;
+	}
+
+	if (inv_cnt < cnt) {
+		ret = ad9647_calibrate_polarity_set(st, false);
+		if (ret)
+			return ret;
+	} else {
+		/*
+		 * polarity inverted is the last test to run. Hence, there's no
+		 * need to re-do any configuration. We just need to "normalize"
+		 * the selected value.
+		 */
+		val = inv_val - test_points;
+	}
+
+	if (st->info->has_dco)
+		dev_dbg(dev, "%sDCO 0x%X CLK %lu Hz\n", inv_cnt >= cnt ? "INVERT " : "",
+			val, sample_rate);
+	else
+		dev_dbg(dev, "%sIDELAY 0x%x\n", inv_cnt >= cnt ? "INVERT " : "",
+			val);
+
+	ret = ad9467_calibrate_apply(st, val);
+	if (ret)
+		return ret;
+
+	/* finally apply the optimal value */
+	return ad9647_calibrate_stop(st);
+}
+
 static int ad9467_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan,
 			   int *val, int *val2, long m)
@@ -345,7 +603,9 @@ static int ad9467_write_raw(struct iio_dev *indio_dev,
 {
 	struct ad9467_state *st = iio_priv(indio_dev);
 	const struct ad9467_chip_info *info = st->info;
+	unsigned long sample_rate;
 	long r_clk;
+	int ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SCALE:
@@ -358,7 +618,23 @@ static int ad9467_write_raw(struct iio_dev *indio_dev,
 			return -EINVAL;
 		}
 
-		return clk_set_rate(st->clk, r_clk);
+		sample_rate = clk_get_rate(st->clk);
+		/*
+		 * clk_set_rate() would also do this but since we would still
+		 * need it for avoiding an unnecessary calibration, do it now.
+		 */
+		if (sample_rate == r_clk)
+			return 0;
+
+		iio_device_claim_direct_scoped(return -EBUSY, indio_dev) {
+			ret = clk_set_rate(st->clk, r_clk);
+			if (ret)
+				return ret;
+
+			guard(mutex)(&st->lock);
+			ret = ad9467_calibrate(st);
+		}
+		return ret;
 	default:
 		return -EINVAL;
 	}
@@ -411,18 +687,6 @@ static const struct iio_info ad9467_info = {
 	.read_avail = ad9467_read_avail,
 };
 
-static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode)
-{
-	int ret;
-
-	ret = ad9467_spi_write(spi, AN877_ADC_REG_OUTPUT_MODE, mode);
-	if (ret < 0)
-		return ret;
-
-	return ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
-				AN877_ADC_TRANSFER_SYNC);
-}
-
 static int ad9467_scale_fill(struct ad9467_state *st)
 {
 	const struct ad9467_chip_info *info = st->info;
@@ -442,29 +706,6 @@ static int ad9467_scale_fill(struct ad9467_state *st)
 	return 0;
 }
 
-static int ad9467_setup(struct ad9467_state *st)
-{
-	struct iio_backend_data_fmt data = {
-		.sign_extend = true,
-		.enable = true,
-	};
-	unsigned int c, mode;
-	int ret;
-
-	mode = st->info->default_output_mode | AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
-	ret = ad9467_outputmode_set(st->spi, mode);
-	if (ret)
-		return ret;
-
-	for (c = 0; c < st->info->num_channels; c++) {
-		ret = iio_backend_data_format_set(st->back, c, &data);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
 static int ad9467_reset(struct device *dev)
 {
 	struct gpio_desc *gpio;
@@ -521,6 +762,52 @@ static int ad9467_iio_backend_get(struct ad9467_state *st)
 	return -ENODEV;
 }
 
+static ssize_t ad9467_dump_calib_table(struct file *file,
+				       char __user *userbuf,
+				       size_t count, loff_t *ppos)
+{
+	struct ad9467_state *st = file->private_data;
+	unsigned int bit, size = BITS_PER_TYPE(st->calib_map);
+	/* +2 for the newline and +1 for the string termination */
+	unsigned char map[AD9647_MAX_TEST_POINTS * 2 + 3];
+	ssize_t len = 0;
+
+	guard(mutex)(&st->lock);
+	if (*ppos)
+		goto out_read;
+
+	for (bit = 0; bit < size; bit++) {
+		if (bit == size / 2)
+			len += scnprintf(map + len, sizeof(map) - len, "\n");
+
+		len += scnprintf(map + len, sizeof(map) - len, "%c",
+				 test_bit(bit, st->calib_map) ? 'x' : 'o');
+	}
+
+	len += scnprintf(map + len, sizeof(map) - len, "\n");
+out_read:
+	return simple_read_from_buffer(userbuf, count, ppos, map, len);
+}
+
+static const struct file_operations ad9467_calib_table_fops = {
+	.open = simple_open,
+	.read = ad9467_dump_calib_table,
+	.llseek = default_llseek,
+	.owner = THIS_MODULE,
+};
+
+static void ad9467_debugfs_init(struct iio_dev *indio_dev)
+{
+	struct dentry *d = iio_get_debugfs_dentry(indio_dev);
+	struct ad9467_state *st = iio_priv(indio_dev);
+
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
+		return;
+
+	debugfs_create_file("calibration_table_dump", 0400, d, st,
+			    &ad9467_calib_table_fops);
+}
+
 static int ad9467_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
@@ -556,7 +843,7 @@ static int ad9467_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID);
+	id = ad9467_spi_read(st, AN877_ADC_REG_CHIP_ID);
 	if (id != st->info->id) {
 		dev_err(&spi->dev, "Mismatch CHIP_ID, got 0x%X, expected 0x%X\n",
 			id, st->info->id);
@@ -580,11 +867,17 @@ static int ad9467_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	ret = ad9467_setup(st);
+	ret = ad9467_calibrate(st);
 	if (ret)
 		return ret;
 
-	return devm_iio_device_register(&spi->dev, indio_dev);
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
+	if (ret)
+		return ret;
+
+	ad9467_debugfs_init(indio_dev);
+
+	return 0;
 }
 
 static const struct of_device_id ad9467_of_match[] = {
diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index a602429cdd..a2b87f6b7a 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -206,7 +206,7 @@ int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
 	unsigned int mode, unsigned int channel)
 {
 	int ret;
-	unsigned long timeout;
+	unsigned long time_left;
 
 	ret = ad_sigma_delta_set_channel(sigma_delta, channel);
 	if (ret)
@@ -222,11 +222,11 @@ int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
 		goto out;
 
 	sigma_delta->irq_dis = false;
-	enable_irq(sigma_delta->spi->irq);
-	timeout = wait_for_completion_timeout(&sigma_delta->completion, 2 * HZ);
-	if (timeout == 0) {
+	enable_irq(sigma_delta->irq_line);
+	time_left = wait_for_completion_timeout(&sigma_delta->completion, 2 * HZ);
+	if (time_left == 0) {
 		sigma_delta->irq_dis = true;
-		disable_irq_nosync(sigma_delta->spi->irq);
+		disable_irq_nosync(sigma_delta->irq_line);
 		ret = -EIO;
 	} else {
 		ret = 0;
@@ -295,7 +295,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_SINGLE);
 
 	sigma_delta->irq_dis = false;
-	enable_irq(sigma_delta->spi->irq);
+	enable_irq(sigma_delta->irq_line);
 	ret = wait_for_completion_interruptible_timeout(
 			&sigma_delta->completion, HZ);
 
@@ -315,7 +315,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 
 out:
 	if (!sigma_delta->irq_dis) {
-		disable_irq_nosync(sigma_delta->spi->irq);
+		disable_irq_nosync(sigma_delta->irq_line);
 		sigma_delta->irq_dis = true;
 	}
 
@@ -396,7 +396,7 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
 		goto err_unlock;
 
 	sigma_delta->irq_dis = false;
-	enable_irq(sigma_delta->spi->irq);
+	enable_irq(sigma_delta->irq_line);
 
 	return 0;
 
@@ -414,7 +414,7 @@ static int ad_sd_buffer_postdisable(struct iio_dev *indio_dev)
 	wait_for_completion_timeout(&sigma_delta->completion, HZ);
 
 	if (!sigma_delta->irq_dis) {
-		disable_irq_nosync(sigma_delta->spi->irq);
+		disable_irq_nosync(sigma_delta->irq_line);
 		sigma_delta->irq_dis = true;
 	}
 
@@ -516,7 +516,7 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
 irq_handled:
 	iio_trigger_notify_done(indio_dev->trig);
 	sigma_delta->irq_dis = false;
-	enable_irq(sigma_delta->spi->irq);
+	enable_irq(sigma_delta->irq_line);
 
 	return IRQ_HANDLED;
 }
@@ -587,13 +587,13 @@ static int devm_ad_sd_probe_trigger(struct device *dev, struct iio_dev *indio_de
 	sigma_delta->irq_dis = true;
 
 	/* the IRQ core clears IRQ_DISABLE_UNLAZY flag when freeing an IRQ */
-	irq_set_status_flags(sigma_delta->spi->irq, IRQ_DISABLE_UNLAZY);
+	irq_set_status_flags(sigma_delta->irq_line, IRQ_DISABLE_UNLAZY);
 
 	/* Allow overwriting the flags from firmware */
 	if (!irq_flags)
 		irq_flags = sigma_delta->info->irq_flags;
 
-	ret = devm_request_irq(dev, sigma_delta->spi->irq,
+	ret = devm_request_irq(dev, sigma_delta->irq_line,
 			       ad_sd_data_rdy_trig_poll,
 			       irq_flags | IRQF_NO_AUTOEN,
 			       indio_dev->name,
@@ -673,6 +673,11 @@ int ad_sd_init(struct ad_sigma_delta *sigma_delta, struct iio_dev *indio_dev,
 		}
 	}
 
+	if (info->irq_line)
+		sigma_delta->irq_line = info->irq_line;
+	else
+		sigma_delta->irq_line = spi->irq;
+
 	iio_device_set_drvdata(indio_dev, sigma_delta);
 
 	return 0;
diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
index e3b2158829..bf51d619eb 100644
--- a/drivers/iio/adc/adi-axi-adc.c
+++ b/drivers/iio/adc/adi-axi-adc.c
@@ -7,11 +7,13 @@
  */
 
 #include <linux/bitfield.h>
+#include <linux/cleanup.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
@@ -37,6 +39,9 @@
 #define   ADI_AXI_REG_RSTN_MMCM_RSTN		BIT(1)
 #define   ADI_AXI_REG_RSTN_RSTN			BIT(0)
 
+#define ADI_AXI_ADC_REG_CTRL			0x0044
+#define    ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK	BIT(1)
+
 /* ADC Channel controls */
 
 #define ADI_AXI_REG_CHAN_CTRL(c)		(0x0400 + (c) * 0x40)
@@ -51,14 +56,28 @@
 #define   ADI_AXI_REG_CHAN_CTRL_PN_TYPE_OWR	BIT(1)
 #define   ADI_AXI_REG_CHAN_CTRL_ENABLE		BIT(0)
 
+#define ADI_AXI_ADC_REG_CHAN_STATUS(c)		(0x0404 + (c) * 0x40)
+#define   ADI_AXI_ADC_CHAN_STAT_PN_MASK		GENMASK(2, 1)
+
+#define ADI_AXI_ADC_REG_CHAN_CTRL_3(c)		(0x0418 + (c) * 0x40)
+#define   ADI_AXI_ADC_CHAN_PN_SEL_MASK		GENMASK(19, 16)
+
+/* IO Delays */
+#define ADI_AXI_ADC_REG_DELAY(l)		(0x0800 + (l) * 0x4)
+#define   AXI_ADC_DELAY_CTRL_MASK		GENMASK(4, 0)
+
+#define ADI_AXI_ADC_MAX_IO_NUM_LANES		15
+
 #define ADI_AXI_REG_CHAN_CTRL_DEFAULTS		\
 	(ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT |	\
 	 ADI_AXI_REG_CHAN_CTRL_FMT_EN |		\
 	 ADI_AXI_REG_CHAN_CTRL_ENABLE)
 
 struct adi_axi_adc_state {
-	struct regmap				*regmap;
-	struct device				*dev;
+	struct regmap *regmap;
+	struct device *dev;
+	/* lock to protect multiple accesses to the device registers */
+	struct mutex lock;
 };
 
 static int axi_adc_enable(struct iio_backend *back)
@@ -66,6 +85,7 @@ static int axi_adc_enable(struct iio_backend *back)
 	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
 	int ret;
 
+	guard(mutex)(&st->lock);
 	ret = regmap_set_bits(st->regmap, ADI_AXI_REG_RSTN,
 			      ADI_AXI_REG_RSTN_MMCM_RSTN);
 	if (ret)
@@ -80,6 +100,7 @@ static void axi_adc_disable(struct iio_backend *back)
 {
 	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
 
+	guard(mutex)(&st->lock);
 	regmap_write(st->regmap, ADI_AXI_REG_RSTN, 0);
 }
 
@@ -104,6 +125,100 @@ static int axi_adc_data_format_set(struct iio_backend *back, unsigned int chan,
 				  ADI_AXI_REG_CHAN_CTRL_FMT_MASK, val);
 }
 
+static int axi_adc_data_sample_trigger(struct iio_backend *back,
+				       enum iio_backend_sample_trigger trigger)
+{
+	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+
+	switch (trigger) {
+	case IIO_BACKEND_SAMPLE_TRIGGER_EDGE_RISING:
+		return regmap_clear_bits(st->regmap, ADI_AXI_ADC_REG_CTRL,
+					 ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK);
+	case IIO_BACKEND_SAMPLE_TRIGGER_EDGE_FALLING:
+		return regmap_set_bits(st->regmap, ADI_AXI_ADC_REG_CTRL,
+				       ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int axi_adc_iodelays_set(struct iio_backend *back, unsigned int lane,
+				unsigned int tap)
+{
+	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+	int ret;
+	u32 val;
+
+	if (tap > FIELD_MAX(AXI_ADC_DELAY_CTRL_MASK))
+		return -EINVAL;
+	if (lane > ADI_AXI_ADC_MAX_IO_NUM_LANES)
+		return -EINVAL;
+
+	guard(mutex)(&st->lock);
+	ret = regmap_write(st->regmap, ADI_AXI_ADC_REG_DELAY(lane), tap);
+	if (ret)
+		return ret;
+	/*
+	 * If readback is ~0, that means there are issues with the
+	 * delay_clk.
+	 */
+	ret = regmap_read(st->regmap, ADI_AXI_ADC_REG_DELAY(lane), &val);
+	if (ret)
+		return ret;
+	if (val == U32_MAX)
+		return -EIO;
+
+	return 0;
+}
+
+static int axi_adc_test_pattern_set(struct iio_backend *back,
+				    unsigned int chan,
+				    enum iio_backend_test_pattern pattern)
+{
+	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+
+	switch (pattern) {
+	case IIO_BACKEND_NO_TEST_PATTERN:
+		/* nothing to do */
+		return 0;
+	case IIO_BACKEND_ADI_PRBS_9A:
+		return regmap_update_bits(st->regmap, ADI_AXI_ADC_REG_CHAN_CTRL_3(chan),
+					  ADI_AXI_ADC_CHAN_PN_SEL_MASK,
+					  FIELD_PREP(ADI_AXI_ADC_CHAN_PN_SEL_MASK, 0));
+	default:
+		return -EINVAL;
+	}
+}
+
+static int axi_adc_chan_status(struct iio_backend *back, unsigned int chan,
+			       bool *error)
+{
+	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+	int ret;
+	u32 val;
+
+	guard(mutex)(&st->lock);
+	/* reset test bits by setting them */
+	ret = regmap_write(st->regmap, ADI_AXI_ADC_REG_CHAN_STATUS(chan),
+			   ADI_AXI_ADC_CHAN_STAT_PN_MASK);
+	if (ret)
+		return ret;
+
+	/* let's give enough time to validate or erroring the incoming pattern */
+	fsleep(1000);
+
+	ret = regmap_read(st->regmap, ADI_AXI_ADC_REG_CHAN_STATUS(chan), &val);
+	if (ret)
+		return ret;
+
+	if (ADI_AXI_ADC_CHAN_STAT_PN_MASK & val)
+		*error = true;
+	else
+		*error = false;
+
+	return 0;
+}
+
 static int axi_adc_chan_enable(struct iio_backend *back, unsigned int chan)
 {
 	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
@@ -124,26 +239,12 @@ static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
 						 struct iio_dev *indio_dev)
 {
 	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
-	struct iio_buffer *buffer;
 	const char *dma_name;
-	int ret;
 
 	if (device_property_read_string(st->dev, "dma-names", &dma_name))
 		dma_name = "rx";
 
-	buffer = iio_dmaengine_buffer_alloc(st->dev, dma_name);
-	if (IS_ERR(buffer)) {
-		dev_err(st->dev, "Could not get DMA buffer, %ld\n",
-			PTR_ERR(buffer));
-		return ERR_CAST(buffer);
-	}
-
-	indio_dev->modes |= INDIO_BUFFER_HARDWARE;
-	ret = iio_device_attach_buffer(indio_dev, buffer);
-	if (ret)
-		return ERR_PTR(ret);
-
-	return buffer;
+	return iio_dmaengine_buffer_setup(st->dev, indio_dev, dma_name);
 }
 
 static void axi_adc_free_buffer(struct iio_backend *back,
@@ -156,7 +257,6 @@ static const struct regmap_config axi_adc_regmap_config = {
 	.val_bits = 32,
 	.reg_bits = 32,
 	.reg_stride = 4,
-	.max_register = 0x0800,
 };
 
 static const struct iio_backend_ops adi_axi_adc_generic = {
@@ -167,6 +267,10 @@ static const struct iio_backend_ops adi_axi_adc_generic = {
 	.chan_disable = axi_adc_chan_disable,
 	.request_buffer = axi_adc_request_buffer,
 	.free_buffer = axi_adc_free_buffer,
+	.data_sample_trigger = axi_adc_data_sample_trigger,
+	.iodelay_set = axi_adc_iodelays_set,
+	.test_pattern_set = axi_adc_test_pattern_set,
+	.chan_status = axi_adc_chan_status,
 };
 
 static int adi_axi_adc_probe(struct platform_device *pdev)
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 614de96448..78fada4b7b 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -538,7 +538,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
 				long mask)
 {
 	struct exynos_adc *info = iio_priv(indio_dev);
-	unsigned long timeout;
+	unsigned long time_left;
 	int ret;
 
 	if (mask == IIO_CHAN_INFO_SCALE) {
@@ -562,9 +562,9 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
 	if (info->data->start_conv)
 		info->data->start_conv(info, chan->address);
 
-	timeout = wait_for_completion_timeout(&info->completion,
-					      EXYNOS_ADC_TIMEOUT);
-	if (timeout == 0) {
+	time_left = wait_for_completion_timeout(&info->completion,
+						EXYNOS_ADC_TIMEOUT);
+	if (time_left == 0) {
 		dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
 		if (info->data->init_hw)
 			info->data->init_hw(info);
@@ -583,7 +583,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
 static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y)
 {
 	struct exynos_adc *info = iio_priv(indio_dev);
-	unsigned long timeout;
+	unsigned long time_left;
 	int ret;
 
 	mutex_lock(&info->lock);
@@ -597,9 +597,9 @@ static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y)
 	/* Select the ts channel to be used and Trigger conversion */
 	info->data->start_conv(info, ADC_S3C2410_MUX_TS);
 
-	timeout = wait_for_completion_timeout(&info->completion,
-					      EXYNOS_ADC_TIMEOUT);
-	if (timeout == 0) {
+	time_left = wait_for_completion_timeout(&info->completion,
+						EXYNOS_ADC_TIMEOUT);
+	if (time_left == 0) {
 		dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
 		if (info->data->init_hw)
 			info->data->init_hw(info);
diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
index 68c813de06..b680690631 100644
--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -12,8 +12,9 @@
 #include <linux/interrupt.h>
 #include <linux/mfd/imx25-tsadc.h>
 #include <linux/module.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
@@ -107,7 +108,7 @@ static int mx25_gcq_get_raw_value(struct device *dev,
 				  struct mx25_gcq_priv *priv,
 				  int *val)
 {
-	long timeout;
+	long time_left;
 	u32 data;
 
 	/* Setup the configuration we want to use */
@@ -120,12 +121,12 @@ static int mx25_gcq_get_raw_value(struct device *dev,
 	regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS,
 			   MX25_ADCQ_CR_FQS);
 
-	timeout = wait_for_completion_interruptible_timeout(
+	time_left = wait_for_completion_interruptible_timeout(
 		&priv->completed, MX25_GCQ_TIMEOUT);
-	if (timeout < 0) {
+	if (time_left < 0) {
 		dev_err(dev, "ADC wait for measurement failed\n");
-		return timeout;
-	} else if (timeout == 0) {
+		return time_left;
+	} else if (time_left == 0) {
 		dev_err(dev, "ADC timed out\n");
 		return -ETIMEDOUT;
 	}
@@ -198,8 +199,6 @@ static int mx25_gcq_ext_regulator_setup(struct device *dev,
 static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 			       struct mx25_gcq_priv *priv)
 {
-	struct device_node *np = pdev->dev.of_node;
-	struct device_node *child;
 	struct device *dev = &pdev->dev;
 	int ret, i;
 
@@ -216,37 +215,30 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 			     MX25_ADCQ_CFG_IN(i) |
 			     MX25_ADCQ_CFG_REFN_NGND2);
 
-	for_each_child_of_node(np, child) {
+	device_for_each_child_node_scoped(dev, child) {
 		u32 reg;
 		u32 refp = MX25_ADCQ_CFG_REFP_INT;
 		u32 refn = MX25_ADCQ_CFG_REFN_NGND2;
 
-		ret = of_property_read_u32(child, "reg", &reg);
-		if (ret) {
-			dev_err(dev, "Failed to get reg property\n");
-			of_node_put(child);
-			return ret;
-		}
+		ret = fwnode_property_read_u32(child, "reg", &reg);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to get reg property\n");
 
-		if (reg >= MX25_NUM_CFGS) {
-			dev_err(dev,
+		if (reg >= MX25_NUM_CFGS)
+			return dev_err_probe(dev, -EINVAL,
 				"reg value is greater than the number of available configuration registers\n");
-			of_node_put(child);
-			return -EINVAL;
-		}
 
-		of_property_read_u32(child, "fsl,adc-refp", &refp);
-		of_property_read_u32(child, "fsl,adc-refn", &refn);
+		fwnode_property_read_u32(child, "fsl,adc-refp", &refp);
+		fwnode_property_read_u32(child, "fsl,adc-refn", &refn);
 
 		switch (refp) {
 		case MX25_ADC_REFP_EXT:
 		case MX25_ADC_REFP_XP:
 		case MX25_ADC_REFP_YP:
 			ret = mx25_gcq_ext_regulator_setup(&pdev->dev, priv, refp);
-			if (ret) {
-				of_node_put(child);
+			if (ret)
 				return ret;
-			}
 			priv->channel_vref_mv[reg] =
 				regulator_get_voltage(priv->vref[refp]);
 			/* Conversion from uV to mV */
@@ -256,9 +248,8 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 			priv->channel_vref_mv[reg] = 2500;
 			break;
 		default:
-			dev_err(dev, "Invalid positive reference %d\n", refp);
-			of_node_put(child);
-			return -EINVAL;
+			return dev_err_probe(dev, -EINVAL,
+					     "Invalid positive reference %d\n", refp);
 		}
 
 		/*
@@ -268,16 +259,13 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 		refp = MX25_ADCQ_CFG_REFP(refp);
 		refn = MX25_ADCQ_CFG_REFN(refn);
 
-		if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) {
-			dev_err(dev, "Invalid fsl,adc-refp property value\n");
-			of_node_put(child);
-			return -EINVAL;
-		}
-		if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) {
-			dev_err(dev, "Invalid fsl,adc-refn property value\n");
-			of_node_put(child);
-			return -EINVAL;
-		}
+		if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp)
+			return dev_err_probe(dev, -EINVAL,
+					     "Invalid fsl,adc-refp property value\n");
+
+		if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn)
+			return dev_err_probe(dev, -EINVAL,
+					     "Invalid fsl,adc-refn property value\n");
 
 		regmap_update_bits(priv->regs, MX25_ADCQ_CFG(reg),
 				   MX25_ADCQ_CFG_REFP_MASK |
@@ -294,6 +282,17 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 	return 0;
 }
 
+static void mx25_gcq_reg_disable(void *reg)
+{
+	regulator_disable(reg);
+}
+
+/* Custom handling needed as this driver doesn't own the clock */
+static void mx25_gcq_clk_disable(void *clk)
+{
+	clk_disable_unprepare(clk);
+}
+
 static int mx25_gcq_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
@@ -315,10 +314,9 @@ static int mx25_gcq_probe(struct platform_device *pdev)
 		return PTR_ERR(mem);
 
 	priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_gcq_regconfig);
-	if (IS_ERR(priv->regs)) {
-		dev_err(dev, "Failed to initialize regmap\n");
-		return PTR_ERR(priv->regs);
-	}
+	if (IS_ERR(priv->regs))
+		return dev_err_probe(dev, PTR_ERR(priv->regs),
+				     "Failed to initialize regmap\n");
 
 	mutex_init(&priv->lock);
 
@@ -334,69 +332,44 @@ static int mx25_gcq_probe(struct platform_device *pdev)
 
 		ret = regulator_enable(priv->vref[i]);
 		if (ret)
-			goto err_regulator_disable;
+			return ret;
+
+		ret = devm_add_action_or_reset(dev, mx25_gcq_reg_disable,
+					       priv->vref[i]);
+		if (ret)
+			return ret;
 	}
 
 	priv->clk = tsadc->clk;
 	ret = clk_prepare_enable(priv->clk);
-	if (ret) {
-		dev_err(dev, "Failed to enable clock\n");
-		goto err_vref_disable;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable clock\n");
+
+	ret = devm_add_action_or_reset(dev, mx25_gcq_clk_disable,
+				       priv->clk);
+	if (ret)
+		return ret;
 
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0)
-		goto err_clk_unprepare;
+		return ret;
 
 	priv->irq = ret;
-	ret = request_irq(priv->irq, mx25_gcq_irq, 0, pdev->name, priv);
-	if (ret) {
-		dev_err(dev, "Failed requesting IRQ\n");
-		goto err_clk_unprepare;
-	}
+	ret = devm_request_irq(dev, priv->irq, mx25_gcq_irq, 0, pdev->name,
+			       priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed requesting IRQ\n");
 
 	indio_dev->channels = mx25_gcq_channels;
 	indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels);
 	indio_dev->info = &mx25_gcq_iio_info;
 	indio_dev->name = driver_name;
 
-	ret = iio_device_register(indio_dev);
-	if (ret) {
-		dev_err(dev, "Failed to register iio device\n");
-		goto err_irq_free;
-	}
-
-	platform_set_drvdata(pdev, indio_dev);
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register iio device\n");
 
 	return 0;
-
-err_irq_free:
-	free_irq(priv->irq, priv);
-err_clk_unprepare:
-	clk_disable_unprepare(priv->clk);
-err_vref_disable:
-	i = 4;
-err_regulator_disable:
-	for (; i-- > 0;) {
-		if (priv->vref[i])
-			regulator_disable(priv->vref[i]);
-	}
-	return ret;
-}
-
-static void mx25_gcq_remove(struct platform_device *pdev)
-{
-	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
-	struct mx25_gcq_priv *priv = iio_priv(indio_dev);
-	int i;
-
-	iio_device_unregister(indio_dev);
-	free_irq(priv->irq, priv);
-	clk_disable_unprepare(priv->clk);
-	for (i = 4; i-- > 0;) {
-		if (priv->vref[i])
-			regulator_disable(priv->vref[i]);
-	}
 }
 
 static const struct of_device_id mx25_gcq_ids[] = {
@@ -411,7 +384,6 @@ static struct platform_driver mx25_gcq_driver = {
 		.of_match_table = mx25_gcq_ids,
 	},
 	.probe		= mx25_gcq_probe,
-	.remove_new	= mx25_gcq_remove,
 };
 module_platform_driver(mx25_gcq_driver);
 
diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
index c80c55fb8c..fef97c1d22 100644
--- a/drivers/iio/adc/hx711.c
+++ b/drivers/iio/adc/hx711.c
@@ -7,7 +7,7 @@
 #include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/slab.h>
@@ -459,7 +459,6 @@ static const struct iio_chan_spec hx711_chan_spec[] = {
 static int hx711_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
 	struct hx711_data *hx711_data;
 	struct iio_dev *indio_dev;
 	int ret;
@@ -533,7 +532,7 @@ static int hx711_probe(struct platform_device *pdev)
 	hx711_data->gain_chan_a = 128;
 
 	hx711_data->clock_frequency = 400000;
-	ret = of_property_read_u32(np, "clock-frequency",
+	ret = device_property_read_u32(&pdev->dev, "clock-frequency",
 					&hx711_data->clock_frequency);
 
 	/*
diff --git a/drivers/iio/adc/intel_mrfld_adc.c b/drivers/iio/adc/intel_mrfld_adc.c
index 7263ad7612..c7f40ae6e6 100644
--- a/drivers/iio/adc/intel_mrfld_adc.c
+++ b/drivers/iio/adc/intel_mrfld_adc.c
@@ -75,7 +75,7 @@ static int mrfld_adc_single_conv(struct iio_dev *indio_dev,
 	struct mrfld_adc *adc = iio_priv(indio_dev);
 	struct regmap *regmap = adc->regmap;
 	unsigned int req;
-	long timeout;
+	long time_left;
 	__be16 value;
 	int ret;
 
@@ -95,13 +95,13 @@ static int mrfld_adc_single_conv(struct iio_dev *indio_dev,
 	if (ret)
 		goto done;
 
-	timeout = wait_for_completion_interruptible_timeout(&adc->completion,
-							    BCOVE_ADC_TIMEOUT);
-	if (timeout < 0) {
-		ret = timeout;
+	time_left = wait_for_completion_interruptible_timeout(&adc->completion,
+							      BCOVE_ADC_TIMEOUT);
+	if (time_left < 0) {
+		ret = time_left;
 		goto done;
 	}
-	if (timeout == 0) {
+	if (time_left == 0) {
 		ret = -ETIMEDOUT;
 		goto done;
 	}
diff --git a/drivers/iio/adc/max11410.c b/drivers/iio/adc/max11410.c
index 6af829349b..45368850b2 100644
--- a/drivers/iio/adc/max11410.c
+++ b/drivers/iio/adc/max11410.c
@@ -696,7 +696,6 @@ static int max11410_parse_channels(struct max11410_state *st,
 	struct device *dev = &st->spi_dev->dev;
 	struct max11410_channel_config *cfg;
 	struct iio_chan_spec *channels;
-	struct fwnode_handle *child;
 	u32 reference, sig_path;
 	const char *node_name;
 	u32 inputs[2], scale;
@@ -720,7 +719,7 @@ static int max11410_parse_channels(struct max11410_state *st,
 	if (!st->channels)
 		return -ENOMEM;
 
-	device_for_each_child_node(dev, child) {
+	device_for_each_child_node_scoped(dev, child) {
 		node_name = fwnode_get_name(child);
 		if (fwnode_property_present(child, "diff-channels")) {
 			ret = fwnode_property_read_u32_array(child,
@@ -735,47 +734,37 @@ static int max11410_parse_channels(struct max11410_state *st,
 			inputs[1] = 0;
 			chanspec.differential = 0;
 		}
-		if (ret) {
-			fwnode_handle_put(child);
+		if (ret)
 			return ret;
-		}
 
 		if (inputs[0] > MAX11410_CHANNEL_INDEX_MAX ||
-		    inputs[1] > MAX11410_CHANNEL_INDEX_MAX) {
-			fwnode_handle_put(child);
+		    inputs[1] > MAX11410_CHANNEL_INDEX_MAX)
 			return dev_err_probe(&indio_dev->dev, -EINVAL,
 					     "Invalid channel index for %s, should be less than %d\n",
 					     node_name,
 					     MAX11410_CHANNEL_INDEX_MAX + 1);
-		}
 
 		cfg = &st->channels[chan_idx];
 
 		reference = MAX11410_REFSEL_AVDD_AGND;
 		fwnode_property_read_u32(child, "adi,reference", &reference);
-		if (reference > MAX11410_REFSEL_MAX) {
-			fwnode_handle_put(child);
+		if (reference > MAX11410_REFSEL_MAX)
 			return dev_err_probe(&indio_dev->dev, -EINVAL,
 					     "Invalid adi,reference value for %s, should be less than %d.\n",
 					     node_name, MAX11410_REFSEL_MAX + 1);
-		}
 
 		if (!max11410_get_vrefp(st, reference) ||
-		    (!max11410_get_vrefn(st, reference) && reference <= 2)) {
-			fwnode_handle_put(child);
+		    (!max11410_get_vrefn(st, reference) && reference <= 2))
 			return dev_err_probe(&indio_dev->dev, -EINVAL,
 					     "Invalid VREF configuration for %s, either specify corresponding VREF regulators or change adi,reference property.\n",
 					     node_name);
-		}
 
 		sig_path = MAX11410_PGA_SIG_PATH_BUFFERED;
 		fwnode_property_read_u32(child, "adi,input-mode", &sig_path);
-		if (sig_path > MAX11410_SIG_PATH_MAX) {
-			fwnode_handle_put(child);
+		if (sig_path > MAX11410_SIG_PATH_MAX)
 			return dev_err_probe(&indio_dev->dev, -EINVAL,
 					     "Invalid adi,input-mode value for %s, should be less than %d.\n",
 					     node_name, MAX11410_SIG_PATH_MAX + 1);
-		}
 
 		fwnode_property_read_u32(child, "settling-time-us",
 					 &cfg->settling_time_us);
@@ -793,10 +782,8 @@ static int max11410_parse_channels(struct max11410_state *st,
 			cfg->scale_avail = devm_kcalloc(dev, MAX11410_SCALE_AVAIL_SIZE * 2,
 							sizeof(*cfg->scale_avail),
 							GFP_KERNEL);
-			if (!cfg->scale_avail) {
-				fwnode_handle_put(child);
+			if (!cfg->scale_avail)
 				return -ENOMEM;
-			}
 
 			scale = max11410_get_scale(st, *cfg);
 			for (i = 0; i < MAX11410_SCALE_AVAIL_SIZE; i++) {
diff --git a/drivers/iio/adc/mcp3564.c b/drivers/iio/adc/mcp3564.c
index 311b613b60..e2ae13f1e8 100644
--- a/drivers/iio/adc/mcp3564.c
+++ b/drivers/iio/adc/mcp3564.c
@@ -998,7 +998,6 @@ static int mcp3564_parse_fw_children(struct iio_dev *indio_dev)
 	struct mcp3564_state *adc = iio_priv(indio_dev);
 	struct device *dev = &adc->spi->dev;
 	struct iio_chan_spec *channels;
-	struct fwnode_handle *child;
 	struct iio_chan_spec chanspec = mcp3564_channel_template;
 	struct iio_chan_spec temp_chanspec = mcp3564_temp_channel_template;
 	struct iio_chan_spec burnout_chanspec = mcp3564_burnout_channel_template;
@@ -1025,7 +1024,7 @@ static int mcp3564_parse_fw_children(struct iio_dev *indio_dev)
 	if (!channels)
 		return dev_err_probe(dev, -ENOMEM, "Can't allocate memory\n");
 
-	device_for_each_child_node(dev, child) {
+	device_for_each_child_node_scoped(dev, child) {
 		node_name = fwnode_get_name(child);
 
 		if (fwnode_property_present(child, "diff-channels")) {
@@ -1033,26 +1032,25 @@ static int mcp3564_parse_fw_children(struct iio_dev *indio_dev)
 							     "diff-channels",
 							     inputs,
 							     ARRAY_SIZE(inputs));
+			if (ret)
+				return ret;
+
 			chanspec.differential = 1;
 		} else {
 			ret = fwnode_property_read_u32(child, "reg", &inputs[0]);
+			if (ret)
+				return ret;
 
 			chanspec.differential = 0;
 			inputs[1] = MCP3564_AGND;
 		}
-		if (ret) {
-			fwnode_handle_put(child);
-			return ret;
-		}
 
 		if (inputs[0] > MCP3564_INTERNAL_VCM ||
-		    inputs[1] > MCP3564_INTERNAL_VCM) {
-			fwnode_handle_put(child);
+		    inputs[1] > MCP3564_INTERNAL_VCM)
 			return dev_err_probe(&indio_dev->dev, -EINVAL,
 					     "Channel index > %d, for %s\n",
 					     MCP3564_INTERNAL_VCM + 1,
 					     node_name);
-		}
 
 		chanspec.address = (inputs[0] << 4) | inputs[1];
 		chanspec.channel = inputs[0];
diff --git a/drivers/iio/adc/mxs-lradc-adc.c b/drivers/iio/adc/mxs-lradc-adc.c
index 2e60c10ee4..8c7b64e78d 100644
--- a/drivers/iio/adc/mxs-lradc-adc.c
+++ b/drivers/iio/adc/mxs-lradc-adc.c
@@ -724,7 +724,6 @@ static int mxs_lradc_adc_probe(struct platform_device *pdev)
 	iio->dev.of_node = dev->parent->of_node;
 	iio->info = &mxs_lradc_adc_iio_info;
 	iio->modes = INDIO_DIRECT_MODE;
-	iio->masklength = LRADC_MAX_TOTAL_CHANS;
 
 	if (lradc->soc == IMX23_LRADC) {
 		iio->channels = mx23_lradc_chan_spec;
diff --git a/drivers/iio/adc/pac1934.c b/drivers/iio/adc/pac1934.c
index 8a0c357422..456f12faa3 100644
--- a/drivers/iio/adc/pac1934.c
+++ b/drivers/iio/adc/pac1934.c
@@ -1088,8 +1088,8 @@ static int pac1934_chip_identify(struct pac1934_chip_info *info)
  * documentation related to the ACPI device definition
  * https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ApplicationNotes/ApplicationNotes/PAC1934-Integration-Notes-for-Microsoft-Windows-10-and-Windows-11-Driver-Support-DS00002534.pdf
  */
-static bool pac1934_acpi_parse_channel_config(struct i2c_client *client,
-					      struct pac1934_chip_info *info)
+static int pac1934_acpi_parse_channel_config(struct i2c_client *client,
+					     struct pac1934_chip_info *info)
 {
 	acpi_handle handle;
 	union acpi_object *rez;
@@ -1104,7 +1104,7 @@ static bool pac1934_acpi_parse_channel_config(struct i2c_client *client,
 
 	rez = acpi_evaluate_dsm(handle, &guid, 0, PAC1934_ACPI_GET_NAMES_AND_MOHMS_VALS, NULL);
 	if (!rez)
-		return false;
+		return -EINVAL;
 
 	for (i = 0; i < rez->package.count; i += 2) {
 		idx = i / 2;
@@ -1127,7 +1127,7 @@ static bool pac1934_acpi_parse_channel_config(struct i2c_client *client,
 		 * and assign the default sampling rate
 		 */
 		info->sample_rate_value = PAC1934_DEFAULT_CHIP_SAMP_SPEED_HZ;
-		return true;
+		return 0;
 	}
 
 	for (i = 0; i < rez->package.count; i++) {
@@ -1140,7 +1140,7 @@ static bool pac1934_acpi_parse_channel_config(struct i2c_client *client,
 
 	rez = acpi_evaluate_dsm(handle, &guid, 1, PAC1934_ACPI_GET_BIPOLAR_SETTINGS, NULL);
 	if (!rez)
-		return false;
+		return -EINVAL;
 
 	bi_dir_mask = rez->package.elements[0].integer.value;
 	info->bi_dir[0] = ((bi_dir_mask & (1 << 3)) | (bi_dir_mask & (1 << 7))) != 0;
@@ -1152,19 +1152,18 @@ static bool pac1934_acpi_parse_channel_config(struct i2c_client *client,
 
 	rez = acpi_evaluate_dsm(handle, &guid, 1, PAC1934_ACPI_GET_SAMP, NULL);
 	if (!rez)
-		return false;
+		return -EINVAL;
 
 	info->sample_rate_value = rez->package.elements[0].integer.value;
 
 	ACPI_FREE(rez);
 
-	return true;
+	return 0;
 }
 
-static bool pac1934_of_parse_channel_config(struct i2c_client *client,
-					    struct pac1934_chip_info *info)
+static int pac1934_fw_parse_channel_config(struct i2c_client *client,
+					   struct pac1934_chip_info *info)
 {
-	struct fwnode_handle *node, *fwnode;
 	struct device *dev = &client->dev;
 	unsigned int current_channel;
 	int idx, ret;
@@ -1172,46 +1171,38 @@ static bool pac1934_of_parse_channel_config(struct i2c_client *client,
 	info->sample_rate_value = 1024;
 	current_channel = 1;
 
-	fwnode = dev_fwnode(dev);
-	fwnode_for_each_available_child_node(fwnode, node) {
+	device_for_each_child_node_scoped(dev, node) {
 		ret = fwnode_property_read_u32(node, "reg", &idx);
-		if (ret) {
-			dev_err_probe(dev, ret,
-				      "reading invalid channel index\n");
-			goto err_fwnode;
-		}
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "reading invalid channel index\n");
+
 		/* adjust idx to match channel index (1 to 4) from the datasheet */
 		idx--;
 
 		if (current_channel >= (info->phys_channels + 1) ||
-		    idx >= info->phys_channels || idx < 0) {
-			dev_err_probe(dev, -EINVAL,
-				      "%s: invalid channel_index %d value\n",
-				      fwnode_get_name(node), idx);
-			goto err_fwnode;
-		}
+		    idx >= info->phys_channels || idx < 0)
+			return dev_err_probe(dev, -EINVAL,
+					     "%s: invalid channel_index %d value\n",
+					     fwnode_get_name(node), idx);
 
 		/* enable channel */
 		info->active_channels[idx] = true;
 
 		ret = fwnode_property_read_u32(node, "shunt-resistor-micro-ohms",
 					       &info->shunts[idx]);
-		if (ret) {
-			dev_err_probe(dev, ret,
-				      "%s: invalid shunt-resistor value: %d\n",
-				      fwnode_get_name(node), info->shunts[idx]);
-			goto err_fwnode;
-		}
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "%s: invalid shunt-resistor value: %d\n",
+					     fwnode_get_name(node), info->shunts[idx]);
 
 		if (fwnode_property_present(node, "label")) {
 			ret = fwnode_property_read_string(node, "label",
 							  (const char **)&info->labels[idx]);
-			if (ret) {
-				dev_err_probe(dev, ret,
-					      "%s: invalid rail-name value\n",
-					      fwnode_get_name(node));
-				goto err_fwnode;
-			}
+			if (ret)
+				return dev_err_probe(dev, ret,
+						     "%s: invalid rail-name value\n",
+						     fwnode_get_name(node));
 		}
 
 		info->bi_dir[idx] = fwnode_property_read_bool(node, "bipolar");
@@ -1219,12 +1210,7 @@ static bool pac1934_of_parse_channel_config(struct i2c_client *client,
 		current_channel++;
 	}
 
-	return true;
-
-err_fwnode:
-	fwnode_handle_put(node);
-
-	return false;
+	return 0;
 }
 
 static void pac1934_cancel_delayed_work(void *dwork)
@@ -1494,7 +1480,6 @@ static int pac1934_probe(struct i2c_client *client)
 	const struct pac1934_features *chip;
 	struct iio_dev *indio_dev;
 	int cnt, ret;
-	bool match = false;
 	struct device *dev = &client->dev;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*info));
@@ -1528,16 +1513,16 @@ static int pac1934_probe(struct i2c_client *client)
 	}
 
 	if (acpi_match_device(dev->driver->acpi_match_table, dev))
-		match = pac1934_acpi_parse_channel_config(client, info);
+		ret = pac1934_acpi_parse_channel_config(client, info);
 	else
 		/*
 		 * This makes it possible to use also ACPI PRP0001 for
 		 * registering the device using device tree properties.
 		 */
-		match = pac1934_of_parse_channel_config(client, info);
+		ret = pac1934_fw_parse_channel_config(client, info);
 
-	if (!match)
-		return dev_err_probe(dev, -EINVAL,
+	if (ret)
+		return dev_err_probe(dev, ret,
 				     "parameter parsing returned an error\n");
 
 	mutex_init(&info->lock);
diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index b6b612d733..9b69f40bee 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -825,7 +825,6 @@ static int adc5_get_fw_data(struct adc5_chip *adc)
 	const struct adc5_channels *adc_chan;
 	struct iio_chan_spec *iio_chan;
 	struct adc5_channel_prop prop, *chan_props;
-	struct fwnode_handle *child;
 	unsigned int index = 0;
 	int ret;
 
@@ -849,12 +848,10 @@ static int adc5_get_fw_data(struct adc5_chip *adc)
 	if (!adc->data)
 		adc->data = &adc5_data_pmic;
 
-	device_for_each_child_node(adc->dev, child) {
+	device_for_each_child_node_scoped(adc->dev, child) {
 		ret = adc5_get_fw_channel_data(adc, &prop, child, adc->data);
-		if (ret) {
-			fwnode_handle_put(child);
+		if (ret)
 			return ret;
-		}
 
 		prop.scale_fn_type =
 			adc->data->adc_chans[prop.channel].scale_fn_type;
diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c
index d524f2e8e9..15a21d2860 100644
--- a/drivers/iio/adc/rcar-gyroadc.c
+++ b/drivers/iio/adc/rcar-gyroadc.c
@@ -318,7 +318,6 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 	struct rcar_gyroadc *priv = iio_priv(indio_dev);
 	struct device *dev = priv->dev;
 	struct device_node *np = dev->of_node;
-	struct device_node *child;
 	struct regulator *vref;
 	unsigned int reg;
 	unsigned int adcmode = -1, childmode;
@@ -326,7 +325,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 	unsigned int num_channels;
 	int ret, first = 1;
 
-	for_each_child_of_node(np, child) {
+	for_each_available_child_of_node_scoped(np, child) {
 		of_id = of_match_node(rcar_gyroadc_child_match, child);
 		if (!of_id) {
 			dev_err(dev, "Ignoring unsupported ADC \"%pOFn\".",
@@ -352,7 +351,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 			num_channels = ARRAY_SIZE(rcar_gyroadc_iio_channels_3);
 			break;
 		default:
-			goto err_e_inval;
+			return -EINVAL;
 		}
 
 		/*
@@ -369,7 +368,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 				dev_err(dev,
 					"Failed to get child reg property of ADC \"%pOFn\".\n",
 					child);
-				goto err_of_node_put;
+				return ret;
 			}
 
 			/* Channel number is too high. */
@@ -377,7 +376,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 				dev_err(dev,
 					"Only %i channels supported with %pOFn, but reg = <%i>.\n",
 					num_channels, child, reg);
-				goto err_e_inval;
+				return -EINVAL;
 			}
 		}
 
@@ -386,7 +385,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 			dev_err(dev,
 				"Channel %i uses different ADC mode than the rest.\n",
 				reg);
-			goto err_e_inval;
+			return -EINVAL;
 		}
 
 		/* Channel is valid, grab the regulator. */
@@ -396,8 +395,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 		if (IS_ERR(vref)) {
 			dev_dbg(dev, "Channel %i 'vref' supply not connected.\n",
 				reg);
-			ret = PTR_ERR(vref);
-			goto err_of_node_put;
+			return PTR_ERR(vref);
 		}
 
 		priv->vref[reg] = vref;
@@ -422,7 +420,6 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 		 * we can stop parsing here.
 		 */
 		if (childmode == RCAR_GYROADC_MODE_SELECT_1_MB88101A) {
-			of_node_put(child);
 			break;
 		}
 	}
@@ -433,12 +430,6 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 	}
 
 	return 0;
-
-err_e_inval:
-	ret = -EINVAL;
-err_of_node_put:
-	of_node_put(child);
-	return ret;
 }
 
 static void rcar_gyroadc_deinit_supplies(struct iio_dev *indio_dev)
diff --git a/drivers/iio/adc/rtq6056.c b/drivers/iio/adc/rtq6056.c
index a5464737e5..bcb1298409 100644
--- a/drivers/iio/adc/rtq6056.c
+++ b/drivers/iio/adc/rtq6056.c
@@ -520,32 +520,20 @@ static int rtq6056_adc_write_raw(struct iio_dev *indio_dev,
 {
 	struct rtq6056_priv *priv = iio_priv(indio_dev);
 	const struct richtek_dev_data *devdata = priv->devdata;
-	int ret;
 
-	ret = iio_device_claim_direct_mode(indio_dev);
-	if (ret)
-		return ret;
-
-	switch (mask) {
-	case IIO_CHAN_INFO_SAMP_FREQ:
-		if (devdata->fixed_samp_freq) {
-			ret = -EINVAL;
-			break;
+	iio_device_claim_direct_scoped(return -EBUSY, indio_dev) {
+		switch (mask) {
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			if (devdata->fixed_samp_freq)
+				return -EINVAL;
+			return rtq6056_adc_set_samp_freq(priv, chan, val);
+		case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+			return devdata->set_average(priv, val);
+		default:
+			return -EINVAL;
 		}
-
-		ret = rtq6056_adc_set_samp_freq(priv, chan, val);
-		break;
-	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
-		ret = devdata->set_average(priv, val);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
 	}
-
-	iio_device_release_direct_mode(indio_dev);
-
-	return ret;
+	unreachable();
 }
 
 static const char *rtq6056_channel_labels[RTQ6056_MAX_CHANNEL] = {
diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c
index 0921ff2d9b..cd3a7e46ea 100644
--- a/drivers/iio/adc/rzg2l_adc.c
+++ b/drivers/iio/adc/rzg2l_adc.c
@@ -302,7 +302,6 @@ static irqreturn_t rzg2l_adc_isr(int irq, void *dev_id)
 static int rzg2l_adc_parse_properties(struct platform_device *pdev, struct rzg2l_adc *adc)
 {
 	struct iio_chan_spec *chan_array;
-	struct fwnode_handle *fwnode;
 	struct rzg2l_adc_data *data;
 	unsigned int channel;
 	int num_channels;
@@ -330,17 +329,13 @@ static int rzg2l_adc_parse_properties(struct platform_device *pdev, struct rzg2l
 		return -ENOMEM;
 
 	i = 0;
-	device_for_each_child_node(&pdev->dev, fwnode) {
+	device_for_each_child_node_scoped(&pdev->dev, fwnode) {
 		ret = fwnode_property_read_u32(fwnode, "reg", &channel);
-		if (ret) {
-			fwnode_handle_put(fwnode);
+		if (ret)
 			return ret;
-		}
 
-		if (channel >= RZG2L_ADC_MAX_CHANNELS) {
-			fwnode_handle_put(fwnode);
+		if (channel >= RZG2L_ADC_MAX_CHANNELS)
 			return -EINVAL;
-		}
 
 		chan_array[i].type = IIO_VOLTAGE;
 		chan_array[i].indexed = 1;
diff --git a/drivers/iio/adc/spear_adc.c b/drivers/iio/adc/spear_adc.c
index 71362c2ddf..b6dd096391 100644
--- a/drivers/iio/adc/spear_adc.c
+++ b/drivers/iio/adc/spear_adc.c
@@ -5,8 +5,10 @@
  * Copyright 2012 Stefan Roese <sr@denx.de>
  */
 
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -15,8 +17,6 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/completion.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -70,7 +70,7 @@ struct adc_regs_spear6xx {
 };
 
 struct spear_adc_state {
-	struct device_node *np;
+	struct device *dev;
 	struct adc_regs_spear3xx __iomem *adc_base_spear3xx;
 	struct adc_regs_spear6xx __iomem *adc_base_spear6xx;
 	struct clk *clk;
@@ -123,7 +123,7 @@ static void spear_adc_set_ctrl(struct spear_adc_state *st, int n,
 
 static u32 spear_adc_get_average(struct spear_adc_state *st)
 {
-	if (of_device_is_compatible(st->np, "st,spear600-adc")) {
+	if (device_is_compatible(st->dev, "st,spear600-adc")) {
 		return __raw_readl(&st->adc_base_spear6xx->average.msb) &
 			SPEAR_ADC_DATA_MASK;
 	} else {
@@ -134,7 +134,7 @@ static u32 spear_adc_get_average(struct spear_adc_state *st)
 
 static void spear_adc_set_scanrate(struct spear_adc_state *st, u32 rate)
 {
-	if (of_device_is_compatible(st->np, "st,spear600-adc")) {
+	if (device_is_compatible(st->dev, "st,spear600-adc")) {
 		__raw_writel(SPEAR600_ADC_SCAN_RATE_LO(rate),
 			     &st->adc_base_spear6xx->scan_rate_lo);
 		__raw_writel(SPEAR600_ADC_SCAN_RATE_HI(rate),
@@ -266,7 +266,6 @@ static const struct iio_info spear_adc_info = {
 
 static int spear_adc_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	struct spear_adc_state *st;
 	struct iio_dev *indio_dev = NULL;
@@ -279,11 +278,10 @@ static int spear_adc_probe(struct platform_device *pdev)
 				     "failed allocating iio device\n");
 
 	st = iio_priv(indio_dev);
+	st->dev = dev;
 
 	mutex_init(&st->lock);
 
-	st->np = np;
-
 	/*
 	 * SPEAr600 has a different register layout than other SPEAr SoC's
 	 * (e.g. SPEAr3xx). Let's provide two register base addresses
@@ -310,8 +308,7 @@ static int spear_adc_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "failed requesting interrupt\n");
 
-	if (of_property_read_u32(np, "sampling-frequency",
-				 &st->sampling_freq))
+	if (device_property_read_u32(dev, "sampling-frequency", &st->sampling_freq))
 		return dev_err_probe(dev, -EINVAL,
 				     "sampling-frequency missing in DT\n");
 
@@ -319,13 +316,13 @@ static int spear_adc_probe(struct platform_device *pdev)
 	 * Optional avg_samples defaults to 0, resulting in single data
 	 * conversion
 	 */
-	of_property_read_u32(np, "average-samples", &st->avg_samples);
+	device_property_read_u32(dev, "average-samples", &st->avg_samples);
 
 	/*
 	 * Optional vref_external defaults to 0, resulting in internal vref
 	 * selection
 	 */
-	of_property_read_u32(np, "vref-external", &st->vref_external);
+	device_property_read_u32(dev, "vref-external", &st->vref_external);
 
 	spear_adc_configure(st);
 
@@ -346,19 +343,17 @@ static int spear_adc_probe(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id spear_adc_dt_ids[] = {
 	{ .compatible = "st,spear600-adc", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, spear_adc_dt_ids);
-#endif
 
 static struct platform_driver spear_adc_driver = {
 	.probe		= spear_adc_probe,
 	.driver		= {
 		.name	= SPEAR_ADC_MOD_NAME,
-		.of_match_table = of_match_ptr(spear_adc_dt_ids),
+		.of_match_table = spear_adc_dt_ids,
 	},
 };
 
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 283c207571..375aa7720f 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1408,7 +1408,7 @@ static int stm32_adc_single_conv(struct iio_dev *indio_dev,
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	struct device *dev = indio_dev->dev.parent;
 	const struct stm32_adc_regspec *regs = adc->cfg->regs;
-	long timeout;
+	long time_left;
 	u32 val;
 	int ret;
 
@@ -1440,12 +1440,12 @@ static int stm32_adc_single_conv(struct iio_dev *indio_dev,
 
 	adc->cfg->start_conv(indio_dev, false);
 
-	timeout = wait_for_completion_interruptible_timeout(
+	time_left = wait_for_completion_interruptible_timeout(
 					&adc->completion, STM32_ADC_TIMEOUT);
-	if (timeout == 0) {
+	if (time_left == 0) {
 		ret = -ETIMEDOUT;
-	} else if (timeout < 0) {
-		ret = timeout;
+	} else if (time_left < 0) {
+		ret = time_left;
 	} else {
 		*res = adc->buffer[0];
 		ret = IIO_VAL_INT;
@@ -2187,59 +2187,52 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 				       struct iio_chan_spec *channels)
 {
 	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
-	struct fwnode_handle *child;
+	struct device *dev = &indio_dev->dev;
 	const char *name;
 	int val, scan_index = 0, ret;
 	bool differential;
 	u32 vin[2];
 
-	device_for_each_child_node(&indio_dev->dev, child) {
+	device_for_each_child_node_scoped(dev, child) {
 		ret = fwnode_property_read_u32(child, "reg", &val);
-		if (ret) {
-			dev_err(&indio_dev->dev, "Missing channel index %d\n", ret);
-			goto err;
-		}
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Missing channel index\n");
 
 		ret = fwnode_property_read_string(child, "label", &name);
 		/* label is optional */
 		if (!ret) {
-			if (strlen(name) >= STM32_ADC_CH_SZ) {
-				dev_err(&indio_dev->dev, "Label %s exceeds %d characters\n",
-					name, STM32_ADC_CH_SZ);
-				ret = -EINVAL;
-				goto err;
-			}
+			if (strlen(name) >= STM32_ADC_CH_SZ)
+				return dev_err_probe(dev, -EINVAL,
+						     "Label %s exceeds %d characters\n",
+						     name, STM32_ADC_CH_SZ);
+
 			strscpy(adc->chan_name[val], name, STM32_ADC_CH_SZ);
 			ret = stm32_adc_populate_int_ch(indio_dev, name, val);
 			if (ret == -ENOENT)
 				continue;
 			else if (ret)
-				goto err;
+				return ret;
 		} else if (ret != -EINVAL) {
-			dev_err(&indio_dev->dev, "Invalid label %d\n", ret);
-			goto err;
+			return dev_err_probe(dev, ret, "Invalid label\n");
 		}
 
-		if (val >= adc_info->max_channels) {
-			dev_err(&indio_dev->dev, "Invalid channel %d\n", val);
-			ret = -EINVAL;
-			goto err;
-		}
+		if (val >= adc_info->max_channels)
+			return dev_err_probe(dev, -EINVAL,
+					     "Invalid channel %d\n", val);
 
 		differential = false;
 		ret = fwnode_property_read_u32_array(child, "diff-channels", vin, 2);
 		/* diff-channels is optional */
 		if (!ret) {
 			differential = true;
-			if (vin[0] != val || vin[1] >= adc_info->max_channels) {
-				dev_err(&indio_dev->dev, "Invalid channel in%d-in%d\n",
-					vin[0], vin[1]);
-				ret = -EINVAL;
-				goto err;
-			}
+			if (vin[0] != val || vin[1] >= adc_info->max_channels)
+				return dev_err_probe(dev, -EINVAL,
+						     "Invalid channel in%d-in%d\n",
+						     vin[0], vin[1]);
 		} else if (ret != -EINVAL) {
-			dev_err(&indio_dev->dev, "Invalid diff-channels property %d\n", ret);
-			goto err;
+			return dev_err_probe(dev, ret,
+					     "Invalid diff-channels property\n");
 		}
 
 		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
@@ -2248,11 +2241,9 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 		val = 0;
 		ret = fwnode_property_read_u32(child, "st,min-sample-time-ns", &val);
 		/* st,min-sample-time-ns is optional */
-		if (ret && ret != -EINVAL) {
-			dev_err(&indio_dev->dev, "Invalid st,min-sample-time-ns property %d\n",
-				ret);
-			goto err;
-		}
+		if (ret && ret != -EINVAL)
+			return dev_err_probe(dev, ret,
+					     "Invalid st,min-sample-time-ns property\n");
 
 		stm32_adc_smpr_init(adc, channels[scan_index].channel, val);
 		if (differential)
@@ -2262,11 +2253,6 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 	}
 
 	return scan_index;
-
-err:
-	fwnode_handle_put(child);
-
-	return ret;
 }
 
 static int stm32_adc_chan_fw_init(struct iio_dev *indio_dev, bool timestamping)
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index ca08ae3108..9a47d2c87f 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -1116,7 +1116,7 @@ static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev,
 				   const struct iio_chan_spec *chan, int *res)
 {
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
-	long timeout;
+	long time_left;
 	int ret;
 
 	reinit_completion(&adc->completion);
@@ -1141,17 +1141,17 @@ static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev,
 		goto stop_dfsdm;
 	}
 
-	timeout = wait_for_completion_interruptible_timeout(&adc->completion,
-							    DFSDM_TIMEOUT);
+	time_left = wait_for_completion_interruptible_timeout(&adc->completion,
+							      DFSDM_TIMEOUT);
 
 	/* Mask IRQ for regular conversion achievement*/
 	regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR2(adc->fl_id),
 			   DFSDM_CR2_REOCIE_MASK, DFSDM_CR2_REOCIE(0));
 
-	if (timeout == 0)
+	if (time_left == 0)
 		ret = -ETIMEDOUT;
-	else if (timeout < 0)
-		ret = timeout;
+	else if (time_left < 0)
+		ret = time_left;
 	else
 		ret = IIO_VAL_INT;
 
diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index 6ae967e4d8..d3363d02f2 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -902,10 +902,9 @@ static int ads1015_client_get_channels_config(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ads1015_data *data = iio_priv(indio_dev);
 	struct device *dev = &client->dev;
-	struct fwnode_handle *node;
 	int i = -1;
 
-	device_for_each_child_node(dev, node) {
+	device_for_each_child_node_scoped(dev, node) {
 		u32 pval;
 		unsigned int channel;
 		unsigned int pga = ADS1015_DEFAULT_PGA;
@@ -927,7 +926,6 @@ static int ads1015_client_get_channels_config(struct i2c_client *client)
 			pga = pval;
 			if (pga > 5) {
 				dev_err(dev, "invalid gain on %pfw\n", node);
-				fwnode_handle_put(node);
 				return -EINVAL;
 			}
 		}
@@ -936,7 +934,6 @@ static int ads1015_client_get_channels_config(struct i2c_client *client)
 			data_rate = pval;
 			if (data_rate > 7) {
 				dev_err(dev, "invalid data_rate on %pfw\n", node);
-				fwnode_handle_put(node);
 				return -EINVAL;
 			}
 		}
diff --git a/drivers/iio/adc/ti-ads131e08.c b/drivers/iio/adc/ti-ads131e08.c
index fcfc462543..cb04a29b3d 100644
--- a/drivers/iio/adc/ti-ads131e08.c
+++ b/drivers/iio/adc/ti-ads131e08.c
@@ -694,7 +694,6 @@ static int ads131e08_alloc_channels(struct iio_dev *indio_dev)
 	struct ads131e08_channel_config *channel_config;
 	struct device *dev = &st->spi->dev;
 	struct iio_chan_spec *channels;
-	struct fwnode_handle *node;
 	unsigned int channel, tmp;
 	int num_channels, i, ret;
 
@@ -736,10 +735,10 @@ static int ads131e08_alloc_channels(struct iio_dev *indio_dev)
 		return -ENOMEM;
 
 	i = 0;
-	device_for_each_child_node(dev, node) {
+	device_for_each_child_node_scoped(dev, node) {
 		ret = fwnode_property_read_u32(node, "reg", &channel);
 		if (ret)
-			goto err_child_out;
+			return ret;
 
 		ret = fwnode_property_read_u32(node, "ti,gain", &tmp);
 		if (ret) {
@@ -747,7 +746,7 @@ static int ads131e08_alloc_channels(struct iio_dev *indio_dev)
 		} else {
 			ret = ads131e08_pga_gain_to_field_value(st, tmp);
 			if (ret < 0)
-				goto err_child_out;
+				return ret;
 
 			channel_config[i].pga_gain = tmp;
 		}
@@ -758,7 +757,7 @@ static int ads131e08_alloc_channels(struct iio_dev *indio_dev)
 		} else {
 			ret = ads131e08_validate_channel_mux(st, tmp);
 			if (ret)
-				goto err_child_out;
+				return ret;
 
 			channel_config[i].mux = tmp;
 		}
@@ -785,9 +784,6 @@ static int ads131e08_alloc_channels(struct iio_dev *indio_dev)
 
 	return 0;
 
-err_child_out:
-	fwnode_handle_put(node);
-	return ret;
 }
 
 static void ads131e08_regulator_disable(void *data)
diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c
index 4a247ca25a..0253064fad 100644
--- a/drivers/iio/adc/twl4030-madc.c
+++ b/drivers/iio/adc/twl4030-madc.c
@@ -19,10 +19,12 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/mfd/twl.h>
-#include <linux/module.h>
 #include <linux/stddef.h>
 #include <linux/mutex.h>
 #include <linux/bitops.h>
@@ -30,7 +32,6 @@
 #include <linux/types.h>
 #include <linux/gfp.h>
 #include <linux/err.h>
-#include <linux/of.h>
 #include <linux/regulator/consumer.h>
 
 #include <linux/iio/iio.h>
@@ -744,14 +745,14 @@ static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on)
  */
 static int twl4030_madc_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
+	struct twl4030_madc_platform_data *pdata = dev_get_platdata(dev);
 	struct twl4030_madc_data *madc;
-	struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct device_node *np = pdev->dev.of_node;
 	int irq, ret;
 	u8 regval;
 	struct iio_dev *iio_dev = NULL;
 
-	if (!pdata && !np) {
+	if (!pdata && !dev_fwnode(dev)) {
 		dev_err(&pdev->dev, "neither platform data nor Device Tree node available\n");
 		return -EINVAL;
 	}
@@ -779,7 +780,7 @@ static int twl4030_madc_probe(struct platform_device *pdev)
 	if (pdata)
 		madc->use_second_irq = (pdata->irq_line != 1);
 	else
-		madc->use_second_irq = of_property_read_bool(np,
+		madc->use_second_irq = device_property_read_bool(dev,
 				       "ti,system-uses-second-madc-irq");
 
 	madc->imr = madc->use_second_irq ? TWL4030_MADC_IMR2 :
@@ -905,20 +906,18 @@ static void twl4030_madc_remove(struct platform_device *pdev)
 	regulator_disable(madc->usb3v1);
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id twl_madc_of_match[] = {
 	{ .compatible = "ti,twl4030-madc", },
-	{ },
+	{ }
 };
 MODULE_DEVICE_TABLE(of, twl_madc_of_match);
-#endif
 
 static struct platform_driver twl4030_madc_driver = {
 	.probe = twl4030_madc_probe,
 	.remove_new = twl4030_madc_remove,
 	.driver = {
 		   .name = "twl4030_madc",
-		   .of_match_table = of_match_ptr(twl_madc_of_match),
+		   .of_match_table = twl_madc_of_match,
 	},
 };
 
diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c
index 78bf55438b..6a3db2bce4 100644
--- a/drivers/iio/adc/twl6030-gpadc.c
+++ b/drivers/iio/adc/twl6030-gpadc.c
@@ -519,7 +519,7 @@ static int twl6030_gpadc_read_raw(struct iio_dev *indio_dev,
 {
 	struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev);
 	int ret;
-	long timeout;
+	long time_left;
 
 	mutex_lock(&gpadc->lock);
 
@@ -529,12 +529,12 @@ static int twl6030_gpadc_read_raw(struct iio_dev *indio_dev,
 		goto err;
 	}
 	/* wait for conversion to complete */
-	timeout = wait_for_completion_interruptible_timeout(
+	time_left = wait_for_completion_interruptible_timeout(
 				&gpadc->irq_complete, msecs_to_jiffies(5000));
-	if (timeout == 0) {
+	if (time_left == 0) {
 		ret = -ETIMEDOUT;
 		goto err;
-	} else if (timeout < 0) {
+	} else if (time_left < 0) {
 		ret = -EINTR;
 		goto err;
 	}