Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 87 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/hfi1/opfn.h b/drivers/infiniband/hw/hfi1/opfn.h
new file mode 100644
index 0000000000..62f93c1dc0
--- /dev/null
+++ b/drivers/infiniband/hw/hfi1/opfn.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * Copyright(c) 2018 Intel Corporation.
+ *
+ */
+#ifndef _HFI1_OPFN_H
+#define _HFI1_OPFN_H
+
+/**
+ * DOC: Omni Path Feature Negotion (OPFN)
+ *
+ * OPFN is a discovery protocol for Intel Omni-Path fabric that
+ * allows two RC QPs to negotiate a common feature that both QPs
+ * can support. Currently, the only OPA feature that OPFN
+ * supports is TID RDMA.
+ *
+ * Architecture
+ *
+ * OPFN involves the communication between two QPs on the HFI
+ * level on an Omni-Path fabric, and ULPs have no knowledge of
+ * OPFN at all.
+ *
+ * Implementation
+ *
+ * OPFN extends the existing IB RC protocol with the following
+ * changes:
+ * -- Uses Bit 24 (reserved) of DWORD 1 of Base Transport
+ *    Header (BTH1) to indicate that the RC QP supports OPFN;
+ * -- Uses a combination of RC COMPARE_SWAP opcode (0x13) and
+ *    the address U64_MAX (0xFFFFFFFFFFFFFFFF) as an OPFN
+ *    request; The 64-bit data carried with the request/response
+ *    contains the parameters for negotiation and will be
+ *    defined in tid_rdma.c file;
+ * -- Defines IB_WR_RESERVED3 as IB_WR_OPFN.
+ *
+ * The OPFN communication will be triggered when an RC QP
+ * receives a request with Bit 24 of BTH1 set. The responder QP
+ * will then post send an OPFN request with its local
+ * parameters, which will be sent to the requester QP once all
+ * existing requests on the responder QP side have been sent.
+ * Once the requester QP receives the OPFN request, it will
+ * keep a copy of the responder QP's parameters, and return a
+ * response packet with its own local parameters. The responder
+ * QP receives the response packet and keeps a copy of the requester
+ * QP's parameters. After this exchange, each side has the parameters
+ * for both sides and therefore can select the right parameters
+ * for future transactions
+ */
+
+#include <linux/workqueue.h>
+#include <rdma/ib_verbs.h>
+#include <rdma/rdmavt_qp.h>
+
+/* STL Verbs Extended */
+#define IB_BTHE_E_SHIFT           24
+#define HFI1_VERBS_E_ATOMIC_VADDR U64_MAX
+
+enum hfi1_opfn_codes {
+	STL_VERBS_EXTD_NONE = 0,
+	STL_VERBS_EXTD_TID_RDMA,
+	STL_VERBS_EXTD_MAX
+};
+
+struct hfi1_opfn_data {
+	u8 extended;
+	u16 requested;
+	u16 completed;
+	enum hfi1_opfn_codes curr;
+	/* serialize opfn function calls */
+	spinlock_t lock;
+	struct work_struct opfn_work;
+};
+
+/* WR opcode for OPFN */
+#define IB_WR_OPFN IB_WR_RESERVED3
+
+void opfn_send_conn_request(struct work_struct *work);
+void opfn_conn_response(struct rvt_qp *qp, struct rvt_ack_entry *e,
+			struct ib_atomic_eth *ateth);
+void opfn_conn_reply(struct rvt_qp *qp, u64 data);
+void opfn_conn_error(struct rvt_qp *qp);
+void opfn_qp_init(struct rvt_qp *qp, struct ib_qp_attr *attr, int attr_mask);
+void opfn_trigger_conn_request(struct rvt_qp *qp, u32 bth1);
+int opfn_init(void);
+void opfn_exit(void);
+
+#endif /* _HFI1_OPFN_H */