Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1671 insertions, 0 deletions

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
new file mode 100644
index 0000000000..6dac7c1853
--- /dev/null
+++ b/drivers/input/serio/i8042.c
@@ -0,0 +1,1671 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  i8042 keyboard and mouse controller driver for Linux
+ *
+ *  Copyright (c) 1999-2004 Vojtech Pavlik
+ */
+
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/err.h>
+#include <linux/rcupdate.h>
+#include <linux/platform_device.h>
+#include <linux/i8042.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/property.h>
+
+#include <asm/io.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
+MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver");
+MODULE_LICENSE("GPL");
+
+static bool i8042_nokbd;
+module_param_named(nokbd, i8042_nokbd, bool, 0);
+MODULE_PARM_DESC(nokbd, "Do not probe or use KBD port.");
+
+static bool i8042_noaux;
+module_param_named(noaux, i8042_noaux, bool, 0);
+MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port.");
+
+static bool i8042_nomux;
+module_param_named(nomux, i8042_nomux, bool, 0);
+MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing controller is present.");
+
+static bool i8042_unlock;
+module_param_named(unlock, i8042_unlock, bool, 0);
+MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
+
+static bool i8042_probe_defer;
+module_param_named(probe_defer, i8042_probe_defer, bool, 0);
+MODULE_PARM_DESC(probe_defer, "Allow deferred probing.");
+
+enum i8042_controller_reset_mode {
+	I8042_RESET_NEVER,
+	I8042_RESET_ALWAYS,
+	I8042_RESET_ON_S2RAM,
+#define I8042_RESET_DEFAULT	I8042_RESET_ON_S2RAM
+};
+static enum i8042_controller_reset_mode i8042_reset = I8042_RESET_DEFAULT;
+static int i8042_set_reset(const char *val, const struct kernel_param *kp)
+{
+	enum i8042_controller_reset_mode *arg = kp->arg;
+	int error;
+	bool reset;
+
+	if (val) {
+		error = kstrtobool(val, &reset);
+		if (error)
+			return error;
+	} else {
+		reset = true;
+	}
+
+	*arg = reset ? I8042_RESET_ALWAYS : I8042_RESET_NEVER;
+	return 0;
+}
+
+static const struct kernel_param_ops param_ops_reset_param = {
+	.flags = KERNEL_PARAM_OPS_FL_NOARG,
+	.set = i8042_set_reset,
+};
+#define param_check_reset_param(name, p)	\
+	__param_check(name, p, enum i8042_controller_reset_mode)
+module_param_named(reset, i8042_reset, reset_param, 0);
+MODULE_PARM_DESC(reset, "Reset controller on resume, cleanup or both");
+
+static bool i8042_direct;
+module_param_named(direct, i8042_direct, bool, 0);
+MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode.");
+
+static bool i8042_dumbkbd;
+module_param_named(dumbkbd, i8042_dumbkbd, bool, 0);
+MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard");
+
+static bool i8042_noloop;
+module_param_named(noloop, i8042_noloop, bool, 0);
+MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port");
+
+static bool i8042_notimeout;
+module_param_named(notimeout, i8042_notimeout, bool, 0);
+MODULE_PARM_DESC(notimeout, "Ignore timeouts signalled by i8042");
+
+static bool i8042_kbdreset;
+module_param_named(kbdreset, i8042_kbdreset, bool, 0);
+MODULE_PARM_DESC(kbdreset, "Reset device connected to KBD port");
+
+#ifdef CONFIG_X86
+static bool i8042_dritek;
+module_param_named(dritek, i8042_dritek, bool, 0);
+MODULE_PARM_DESC(dritek, "Force enable the Dritek keyboard extension");
+#endif
+
+#ifdef CONFIG_PNP
+static bool i8042_nopnp;
+module_param_named(nopnp, i8042_nopnp, bool, 0);
+MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
+#endif
+
+#define DEBUG
+#ifdef DEBUG
+static bool i8042_debug;
+module_param_named(debug, i8042_debug, bool, 0600);
+MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off");
+
+static bool i8042_unmask_kbd_data;
+module_param_named(unmask_kbd_data, i8042_unmask_kbd_data, bool, 0600);
+MODULE_PARM_DESC(unmask_kbd_data, "Unconditional enable (may reveal sensitive data) of normally sanitize-filtered kbd data traffic debug log [pre-condition: i8042.debug=1 enabled]");
+#endif
+
+static bool i8042_present;
+static bool i8042_bypass_aux_irq_test;
+static char i8042_kbd_firmware_id[128];
+static char i8042_aux_firmware_id[128];
+static struct fwnode_handle *i8042_kbd_fwnode;
+
+#include "i8042.h"
+
+/*
+ * i8042_lock protects serialization between i8042_command and
+ * the interrupt handler.
+ */
+static DEFINE_SPINLOCK(i8042_lock);
+
+/*
+ * Writers to AUX and KBD ports as well as users issuing i8042_command
+ * directly should acquire i8042_mutex (by means of calling
+ * i8042_lock_chip() and i8042_unlock_chip() helpers) to ensure that
+ * they do not disturb each other (unfortunately in many i8042
+ * implementations write to one of the ports will immediately abort
+ * command that is being processed by another port).
+ */
+static DEFINE_MUTEX(i8042_mutex);
+
+struct i8042_port {
+	struct serio *serio;
+	int irq;
+	bool exists;
+	bool driver_bound;
+	signed char mux;
+};
+
+#define I8042_KBD_PORT_NO	0
+#define I8042_AUX_PORT_NO	1
+#define I8042_MUX_PORT_NO	2
+#define I8042_NUM_PORTS		(I8042_NUM_MUX_PORTS + 2)
+
+static struct i8042_port i8042_ports[I8042_NUM_PORTS];
+
+static unsigned char i8042_initial_ctr;
+static unsigned char i8042_ctr;
+static bool i8042_mux_present;
+static bool i8042_kbd_irq_registered;
+static bool i8042_aux_irq_registered;
+static unsigned char i8042_suppress_kbd_ack;
+static struct platform_device *i8042_platform_device;
+static struct notifier_block i8042_kbd_bind_notifier_block;
+
+static irqreturn_t i8042_interrupt(int irq, void *dev_id);
+static bool (*i8042_platform_filter)(unsigned char data, unsigned char str,
+				     struct serio *serio);
+
+void i8042_lock_chip(void)
+{
+	mutex_lock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_lock_chip);
+
+void i8042_unlock_chip(void)
+{
+	mutex_unlock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_unlock_chip);
+
+int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
+					struct serio *serio))
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+
+	if (i8042_platform_filter) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	i8042_platform_filter = filter;
+
+out:
+	spin_unlock_irqrestore(&i8042_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(i8042_install_filter);
+
+int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
+				       struct serio *port))
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+
+	if (i8042_platform_filter != filter) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	i8042_platform_filter = NULL;
+
+out:
+	spin_unlock_irqrestore(&i8042_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(i8042_remove_filter);
+
+/*
+ * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
+ * be ready for reading values from it / writing values to it.
+ * Called always with i8042_lock held.
+ */
+
+static int i8042_wait_read(void)
+{
+	int i = 0;
+
+	while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) {
+		udelay(50);
+		i++;
+	}
+	return -(i == I8042_CTL_TIMEOUT);
+}
+
+static int i8042_wait_write(void)
+{
+	int i = 0;
+
+	while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) {
+		udelay(50);
+		i++;
+	}
+	return -(i == I8042_CTL_TIMEOUT);
+}
+
+/*
+ * i8042_flush() flushes all data that may be in the keyboard and mouse buffers
+ * of the i8042 down the toilet.
+ */
+
+static int i8042_flush(void)
+{
+	unsigned long flags;
+	unsigned char data, str;
+	int count = 0;
+	int retval = 0;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+
+	while ((str = i8042_read_status()) & I8042_STR_OBF) {
+		if (count++ < I8042_BUFFER_SIZE) {
+			udelay(50);
+			data = i8042_read_data();
+			dbg("%02x <- i8042 (flush, %s)\n",
+			    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		} else {
+			retval = -EIO;
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+	return retval;
+}
+
+/*
+ * i8042_command() executes a command on the i8042. It also sends the input
+ * parameter(s) of the commands to it, and receives the output value(s). The
+ * parameters are to be stored in the param array, and the output is placed
+ * into the same array. The number of the parameters and output values is
+ * encoded in bits 8-11 of the command number.
+ */
+
+static int __i8042_command(unsigned char *param, int command)
+{
+	int i, error;
+
+	if (i8042_noloop && command == I8042_CMD_AUX_LOOP)
+		return -1;
+
+	error = i8042_wait_write();
+	if (error)
+		return error;
+
+	dbg("%02x -> i8042 (command)\n", command & 0xff);
+	i8042_write_command(command & 0xff);
+
+	for (i = 0; i < ((command >> 12) & 0xf); i++) {
+		error = i8042_wait_write();
+		if (error) {
+			dbg("     -- i8042 (wait write timeout)\n");
+			return error;
+		}
+		dbg("%02x -> i8042 (parameter)\n", param[i]);
+		i8042_write_data(param[i]);
+	}
+
+	for (i = 0; i < ((command >> 8) & 0xf); i++) {
+		error = i8042_wait_read();
+		if (error) {
+			dbg("     -- i8042 (wait read timeout)\n");
+			return error;
+		}
+
+		if (command == I8042_CMD_AUX_LOOP &&
+		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
+			dbg("     -- i8042 (auxerr)\n");
+			return -1;
+		}
+
+		param[i] = i8042_read_data();
+		dbg("%02x <- i8042 (return)\n", param[i]);
+	}
+
+	return 0;
+}
+
+int i8042_command(unsigned char *param, int command)
+{
+	unsigned long flags;
+	int retval;
+
+	if (!i8042_present)
+		return -1;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+	retval = __i8042_command(param, command);
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+	return retval;
+}
+EXPORT_SYMBOL(i8042_command);
+
+/*
+ * i8042_kbd_write() sends a byte out through the keyboard interface.
+ */
+
+static int i8042_kbd_write(struct serio *port, unsigned char c)
+{
+	unsigned long flags;
+	int retval = 0;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+
+	if (!(retval = i8042_wait_write())) {
+		dbg("%02x -> i8042 (kbd-data)\n", c);
+		i8042_write_data(c);
+	}
+
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+	return retval;
+}
+
+/*
+ * i8042_aux_write() sends a byte out through the aux interface.
+ */
+
+static int i8042_aux_write(struct serio *serio, unsigned char c)
+{
+	struct i8042_port *port = serio->port_data;
+
+	return i8042_command(&c, port->mux == -1 ?
+					I8042_CMD_AUX_SEND :
+					I8042_CMD_MUX_SEND + port->mux);
+}
+
+
+/*
+ * i8042_port_close attempts to clear AUX or KBD port state by disabling
+ * and then re-enabling it.
+ */
+
+static void i8042_port_close(struct serio *serio)
+{
+	int irq_bit;
+	int disable_bit;
+	const char *port_name;
+
+	if (serio == i8042_ports[I8042_AUX_PORT_NO].serio) {
+		irq_bit = I8042_CTR_AUXINT;
+		disable_bit = I8042_CTR_AUXDIS;
+		port_name = "AUX";
+	} else {
+		irq_bit = I8042_CTR_KBDINT;
+		disable_bit = I8042_CTR_KBDDIS;
+		port_name = "KBD";
+	}
+
+	i8042_ctr &= ~irq_bit;
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		pr_warn("Can't write CTR while closing %s port\n", port_name);
+
+	udelay(50);
+
+	i8042_ctr &= ~disable_bit;
+	i8042_ctr |= irq_bit;
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		pr_err("Can't reactivate %s port\n", port_name);
+
+	/*
+	 * See if there is any data appeared while we were messing with
+	 * port state.
+	 */
+	i8042_interrupt(0, NULL);
+}
+
+/*
+ * i8042_start() is called by serio core when port is about to finish
+ * registering. It will mark port as existing so i8042_interrupt can
+ * start sending data through it.
+ */
+static int i8042_start(struct serio *serio)
+{
+	struct i8042_port *port = serio->port_data;
+
+	device_set_wakeup_capable(&serio->dev, true);
+
+	/*
+	 * On platforms using suspend-to-idle, allow the keyboard to
+	 * wake up the system from sleep by enabling keyboard wakeups
+	 * by default.  This is consistent with keyboard wakeup
+	 * behavior on many platforms using suspend-to-RAM (ACPI S3)
+	 * by default.
+	 */
+	if (pm_suspend_default_s2idle() &&
+	    serio == i8042_ports[I8042_KBD_PORT_NO].serio) {
+		device_set_wakeup_enable(&serio->dev, true);
+	}
+
+	spin_lock_irq(&i8042_lock);
+	port->exists = true;
+	spin_unlock_irq(&i8042_lock);
+
+	return 0;
+}
+
+/*
+ * i8042_stop() marks serio port as non-existing so i8042_interrupt
+ * will not try to send data to the port that is about to go away.
+ * The function is called by serio core as part of unregister procedure.
+ */
+static void i8042_stop(struct serio *serio)
+{
+	struct i8042_port *port = serio->port_data;
+
+	spin_lock_irq(&i8042_lock);
+	port->exists = false;
+	port->serio = NULL;
+	spin_unlock_irq(&i8042_lock);
+
+	/*
+	 * We need to make sure that interrupt handler finishes using
+	 * our serio port before we return from this function.
+	 * We synchronize with both AUX and KBD IRQs because there is
+	 * a (very unlikely) chance that AUX IRQ is raised for KBD port
+	 * and vice versa.
+	 */
+	synchronize_irq(I8042_AUX_IRQ);
+	synchronize_irq(I8042_KBD_IRQ);
+}
+
+/*
+ * i8042_filter() filters out unwanted bytes from the input data stream.
+ * It is called from i8042_interrupt and thus is running with interrupts
+ * off and i8042_lock held.
+ */
+static bool i8042_filter(unsigned char data, unsigned char str,
+			 struct serio *serio)
+{
+	if (unlikely(i8042_suppress_kbd_ack)) {
+		if ((~str & I8042_STR_AUXDATA) &&
+		    (data == 0xfa || data == 0xfe)) {
+			i8042_suppress_kbd_ack--;
+			dbg("Extra keyboard ACK - filtered out\n");
+			return true;
+		}
+	}
+
+	if (i8042_platform_filter && i8042_platform_filter(data, str, serio)) {
+		dbg("Filtered out by platform filter\n");
+		return true;
+	}
+
+	return false;
+}
+
+/*
+ * i8042_interrupt() is the most important function in this driver -
+ * it handles the interrupts from the i8042, and sends incoming bytes
+ * to the upper layers.
+ */
+
+static irqreturn_t i8042_interrupt(int irq, void *dev_id)
+{
+	struct i8042_port *port;
+	struct serio *serio;
+	unsigned long flags;
+	unsigned char str, data;
+	unsigned int dfl;
+	unsigned int port_no;
+	bool filtered;
+	int ret = 1;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+
+	str = i8042_read_status();
+	if (unlikely(~str & I8042_STR_OBF)) {
+		spin_unlock_irqrestore(&i8042_lock, flags);
+		if (irq)
+			dbg("Interrupt %d, without any data\n", irq);
+		ret = 0;
+		goto out;
+	}
+
+	data = i8042_read_data();
+
+	if (i8042_mux_present && (str & I8042_STR_AUXDATA)) {
+		static unsigned long last_transmit;
+		static unsigned char last_str;
+
+		dfl = 0;
+		if (str & I8042_STR_MUXERR) {
+			dbg("MUX error, status is %02x, data is %02x\n",
+			    str, data);
+/*
+ * When MUXERR condition is signalled the data register can only contain
+ * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
+ * it is not always the case. Some KBCs also report 0xfc when there is
+ * nothing connected to the port while others sometimes get confused which
+ * port the data came from and signal error leaving the data intact. They
+ * _do not_ revert to legacy mode (actually I've never seen KBC reverting
+ * to legacy mode yet, when we see one we'll add proper handling).
+ * Anyway, we process 0xfc, 0xfd, 0xfe and 0xff as timeouts, and for the
+ * rest assume that the data came from the same serio last byte
+ * was transmitted (if transmission happened not too long ago).
+ */
+
+			switch (data) {
+				default:
+					if (time_before(jiffies, last_transmit + HZ/10)) {
+						str = last_str;
+						break;
+					}
+					fallthrough;	/* report timeout */
+				case 0xfc:
+				case 0xfd:
+				case 0xfe: dfl = SERIO_TIMEOUT; data = 0xfe; break;
+				case 0xff: dfl = SERIO_PARITY;  data = 0xfe; break;
+			}
+		}
+
+		port_no = I8042_MUX_PORT_NO + ((str >> 6) & 3);
+		last_str = str;
+		last_transmit = jiffies;
+	} else {
+
+		dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) |
+		      ((str & I8042_STR_TIMEOUT && !i8042_notimeout) ? SERIO_TIMEOUT : 0);
+
+		port_no = (str & I8042_STR_AUXDATA) ?
+				I8042_AUX_PORT_NO : I8042_KBD_PORT_NO;
+	}
+
+	port = &i8042_ports[port_no];
+	serio = port->exists ? port->serio : NULL;
+
+	filter_dbg(port->driver_bound, data, "<- i8042 (interrupt, %d, %d%s%s)\n",
+		   port_no, irq,
+		   dfl & SERIO_PARITY ? ", bad parity" : "",
+		   dfl & SERIO_TIMEOUT ? ", timeout" : "");
+
+	filtered = i8042_filter(data, str, serio);
+
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+	if (likely(serio && !filtered))
+		serio_interrupt(serio, data, dfl);
+
+ out:
+	return IRQ_RETVAL(ret);
+}
+
+/*
+ * i8042_enable_kbd_port enables keyboard port on chip
+ */
+
+static int i8042_enable_kbd_port(void)
+{
+	i8042_ctr &= ~I8042_CTR_KBDDIS;
+	i8042_ctr |= I8042_CTR_KBDINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		i8042_ctr &= ~I8042_CTR_KBDINT;
+		i8042_ctr |= I8042_CTR_KBDDIS;
+		pr_err("Failed to enable KBD port\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * i8042_enable_aux_port enables AUX (mouse) port on chip
+ */
+
+static int i8042_enable_aux_port(void)
+{
+	i8042_ctr &= ~I8042_CTR_AUXDIS;
+	i8042_ctr |= I8042_CTR_AUXINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		i8042_ctr &= ~I8042_CTR_AUXINT;
+		i8042_ctr |= I8042_CTR_AUXDIS;
+		pr_err("Failed to enable AUX port\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * i8042_enable_mux_ports enables 4 individual AUX ports after
+ * the controller has been switched into Multiplexed mode
+ */
+
+static int i8042_enable_mux_ports(void)
+{
+	unsigned char param;
+	int i;
+
+	for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
+		i8042_command(&param, I8042_CMD_MUX_PFX + i);
+		i8042_command(&param, I8042_CMD_AUX_ENABLE);
+	}
+
+	return i8042_enable_aux_port();
+}
+
+/*
+ * i8042_set_mux_mode checks whether the controller has an
+ * active multiplexor and puts the chip into Multiplexed (true)
+ * or Legacy (false) mode.
+ */
+
+static int i8042_set_mux_mode(bool multiplex, unsigned char *mux_version)
+{
+
+	unsigned char param, val;
+/*
+ * Get rid of bytes in the queue.
+ */
+
+	i8042_flush();
+
+/*
+ * Internal loopback test - send three bytes, they should come back from the
+ * mouse interface, the last should be version.
+ */
+
+	param = val = 0xf0;
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != val)
+		return -1;
+	param = val = multiplex ? 0x56 : 0xf6;
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != val)
+		return -1;
+	param = val = multiplex ? 0xa4 : 0xa5;
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == val)
+		return -1;
+
+/*
+ * Workaround for interference with USB Legacy emulation
+ * that causes a v10.12 MUX to be found.
+ */
+	if (param == 0xac)
+		return -1;
+
+	if (mux_version)
+		*mux_version = param;
+
+	return 0;
+}
+
+/*
+ * i8042_check_mux() checks whether the controller supports the PS/2 Active
+ * Multiplexing specification by Synaptics, Phoenix, Insyde and
+ * LCS/Telegraphics.
+ */
+
+static int i8042_check_mux(void)
+{
+	unsigned char mux_version;
+
+	if (i8042_set_mux_mode(true, &mux_version))
+		return -1;
+
+	pr_info("Detected active multiplexing controller, rev %d.%d\n",
+		(mux_version >> 4) & 0xf, mux_version & 0xf);
+
+/*
+ * Disable all muxed ports by disabling AUX.
+ */
+	i8042_ctr |= I8042_CTR_AUXDIS;
+	i8042_ctr &= ~I8042_CTR_AUXINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		pr_err("Failed to disable AUX port, can't use MUX\n");
+		return -EIO;
+	}
+
+	i8042_mux_present = true;
+
+	return 0;
+}
+
+/*
+ * The following is used to test AUX IRQ delivery.
+ */
+static struct completion i8042_aux_irq_delivered;
+static bool i8042_irq_being_tested;
+
+static irqreturn_t i8042_aux_test_irq(int irq, void *dev_id)
+{
+	unsigned long flags;
+	unsigned char str, data;
+	int ret = 0;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+	str = i8042_read_status();
+	if (str & I8042_STR_OBF) {
+		data = i8042_read_data();
+		dbg("%02x <- i8042 (aux_test_irq, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		if (i8042_irq_being_tested &&
+		    data == 0xa5 && (str & I8042_STR_AUXDATA))
+			complete(&i8042_aux_irq_delivered);
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+	return IRQ_RETVAL(ret);
+}
+
+/*
+ * i8042_toggle_aux - enables or disables AUX port on i8042 via command and
+ * verifies success by readinng CTR. Used when testing for presence of AUX
+ * port.
+ */
+static int i8042_toggle_aux(bool on)
+{
+	unsigned char param;
+	int i;
+
+	if (i8042_command(&param,
+			on ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE))
+		return -1;
+
+	/* some chips need some time to set the I8042_CTR_AUXDIS bit */
+	for (i = 0; i < 100; i++) {
+		udelay(50);
+
+		if (i8042_command(&param, I8042_CMD_CTL_RCTR))
+			return -1;
+
+		if (!(param & I8042_CTR_AUXDIS) == on)
+			return 0;
+	}
+
+	return -1;
+}
+
+/*
+ * i8042_check_aux() applies as much paranoia as it can at detecting
+ * the presence of an AUX interface.
+ */
+
+static int i8042_check_aux(void)
+{
+	int retval = -1;
+	bool irq_registered = false;
+	bool aux_loop_broken = false;
+	unsigned long flags;
+	unsigned char param;
+
+/*
+ * Get rid of bytes in the queue.
+ */
+
+	i8042_flush();
+
+/*
+ * Internal loopback test - filters out AT-type i8042's. Unfortunately
+ * SiS screwed up and their 5597 doesn't support the LOOP command even
+ * though it has an AUX port.
+ */
+
+	param = 0x5a;
+	retval = i8042_command(&param, I8042_CMD_AUX_LOOP);
+	if (retval || param != 0x5a) {
+
+/*
+ * External connection test - filters out AT-soldered PS/2 i8042's
+ * 0x00 - no error, 0x01-0x03 - clock/data stuck, 0xff - general error
+ * 0xfa - no error on some notebooks which ignore the spec
+ * Because it's common for chipsets to return error on perfectly functioning
+ * AUX ports, we test for this only when the LOOP command failed.
+ */
+
+		if (i8042_command(&param, I8042_CMD_AUX_TEST) ||
+		    (param && param != 0xfa && param != 0xff))
+			return -1;
+
+/*
+ * If AUX_LOOP completed without error but returned unexpected data
+ * mark it as broken
+ */
+		if (!retval)
+			aux_loop_broken = true;
+	}
+
+/*
+ * Bit assignment test - filters out PS/2 i8042's in AT mode
+ */
+
+	if (i8042_toggle_aux(false)) {
+		pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
+		pr_warn("If AUX port is really absent please use the 'i8042.noaux' option\n");
+	}
+
+	if (i8042_toggle_aux(true))
+		return -1;
+
+/*
+ * Reset keyboard (needed on some laptops to successfully detect
+ * touchpad, e.g., some Gigabyte laptop models with Elantech
+ * touchpads).
+ */
+	if (i8042_kbdreset) {
+		pr_warn("Attempting to reset device connected to KBD port\n");
+		i8042_kbd_write(NULL, (unsigned char) 0xff);
+	}
+
+/*
+ * Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and
+ * used it for a PCI card or somethig else.
+ */
+
+	if (i8042_noloop || i8042_bypass_aux_irq_test || aux_loop_broken) {
+/*
+ * Without LOOP command we can't test AUX IRQ delivery. Assume the port
+ * is working and hope we are right.
+ */
+		retval = 0;
+		goto out;
+	}
+
+	if (request_irq(I8042_AUX_IRQ, i8042_aux_test_irq, IRQF_SHARED,
+			"i8042", i8042_platform_device))
+		goto out;
+
+	irq_registered = true;
+
+	if (i8042_enable_aux_port())
+		goto out;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+
+	init_completion(&i8042_aux_irq_delivered);
+	i8042_irq_being_tested = true;
+
+	param = 0xa5;
+	retval = __i8042_command(&param, I8042_CMD_AUX_LOOP & 0xf0ff);
+
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+	if (retval)
+		goto out;
+
+	if (wait_for_completion_timeout(&i8042_aux_irq_delivered,
+					msecs_to_jiffies(250)) == 0) {
+/*
+ * AUX IRQ was never delivered so we need to flush the controller to
+ * get rid of the byte we put there; otherwise keyboard may not work.
+ */
+		dbg("     -- i8042 (aux irq test timeout)\n");
+		i8042_flush();
+		retval = -1;
+	}
+
+ out:
+
+/*
+ * Disable the interface.
+ */
+
+	i8042_ctr |= I8042_CTR_AUXDIS;
+	i8042_ctr &= ~I8042_CTR_AUXINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		retval = -1;
+
+	if (irq_registered)
+		free_irq(I8042_AUX_IRQ, i8042_platform_device);
+
+	return retval;
+}
+
+static int i8042_controller_check(void)
+{
+	if (i8042_flush()) {
+		pr_info("No controller found\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int i8042_controller_selftest(void)
+{
+	unsigned char param;
+	int i = 0;
+
+	/*
+	 * We try this 5 times; on some really fragile systems this does not
+	 * take the first time...
+	 */
+	do {
+
+		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
+			pr_err("i8042 controller selftest timeout\n");
+			return -ENODEV;
+		}
+
+		if (param == I8042_RET_CTL_TEST)
+			return 0;
+
+		dbg("i8042 controller selftest: %#x != %#x\n",
+		    param, I8042_RET_CTL_TEST);
+		msleep(50);
+	} while (i++ < 5);
+
+#ifdef CONFIG_X86
+	/*
+	 * On x86, we don't fail entire i8042 initialization if controller
+	 * reset fails in hopes that keyboard port will still be functional
+	 * and user will still get a working keyboard. This is especially
+	 * important on netbooks. On other arches we trust hardware more.
+	 */
+	pr_info("giving up on controller selftest, continuing anyway...\n");
+	return 0;
+#else
+	pr_err("i8042 controller selftest failed\n");
+	return -EIO;
+#endif
+}
+
+/*
+ * i8042_controller_init initializes the i8042 controller, and,
+ * most importantly, sets it into non-xlated mode if that's
+ * desired.
+ */
+
+static int i8042_controller_init(void)
+{
+	unsigned long flags;
+	int n = 0;
+	unsigned char ctr[2];
+
+/*
+ * Save the CTR for restore on unload / reboot.
+ */
+
+	do {
+		if (n >= 10) {
+			pr_err("Unable to get stable CTR read\n");
+			return -EIO;
+		}
+
+		if (n != 0)
+			udelay(50);
+
+		if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
+			pr_err("Can't read CTR while initializing i8042\n");
+			return i8042_probe_defer ? -EPROBE_DEFER : -EIO;
+		}
+
+	} while (n < 2 || ctr[0] != ctr[1]);
+
+	i8042_initial_ctr = i8042_ctr = ctr[0];
+
+/*
+ * Disable the keyboard interface and interrupt.
+ */
+
+	i8042_ctr |= I8042_CTR_KBDDIS;
+	i8042_ctr &= ~I8042_CTR_KBDINT;
+
+/*
+ * Handle keylock.
+ */
+
+	spin_lock_irqsave(&i8042_lock, flags);
+	if (~i8042_read_status() & I8042_STR_KEYLOCK) {
+		if (i8042_unlock)
+			i8042_ctr |= I8042_CTR_IGNKEYLOCK;
+		else
+			pr_warn("Warning: Keylock active\n");
+	}
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+/*
+ * If the chip is configured into nontranslated mode by the BIOS, don't
+ * bother enabling translating and be happy.
+ */
+
+	if (~i8042_ctr & I8042_CTR_XLATE)
+		i8042_direct = true;
+
+/*
+ * Set nontranslated mode for the kbd interface if requested by an option.
+ * After this the kbd interface becomes a simple serial in/out, like the aux
+ * interface is. We don't do this by default, since it can confuse notebook
+ * BIOSes.
+ */
+
+	if (i8042_direct)
+		i8042_ctr &= ~I8042_CTR_XLATE;
+
+/*
+ * Write CTR back.
+ */
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		pr_err("Can't write CTR while initializing i8042\n");
+		return -EIO;
+	}
+
+/*
+ * Flush whatever accumulated while we were disabling keyboard port.
+ */
+
+	i8042_flush();
+
+	return 0;
+}
+
+
+/*
+ * Reset the controller and reset CRT to the original value set by BIOS.
+ */
+
+static void i8042_controller_reset(bool s2r_wants_reset)
+{
+	i8042_flush();
+
+/*
+ * Disable both KBD and AUX interfaces so they don't get in the way
+ */
+
+	i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS;
+	i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		pr_warn("Can't write CTR while resetting\n");
+
+/*
+ * Disable MUX mode if present.
+ */
+
+	if (i8042_mux_present)
+		i8042_set_mux_mode(false, NULL);
+
+/*
+ * Reset the controller if requested.
+ */
+
+	if (i8042_reset == I8042_RESET_ALWAYS ||
+	    (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
+		i8042_controller_selftest();
+	}
+
+/*
+ * Restore the original control register setting.
+ */
+
+	if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
+		pr_warn("Can't restore CTR\n");
+}
+
+
+/*
+ * i8042_panic_blink() will turn the keyboard LEDs on or off and is called
+ * when kernel panics. Flashing LEDs is useful for users running X who may
+ * not see the console and will help distinguishing panics from "real"
+ * lockups.
+ *
+ * Note that DELAY has a limit of 10ms so we will not get stuck here
+ * waiting for KBC to free up even if KBD interrupt is off
+ */
+
+#define DELAY do { mdelay(1); if (++delay > 10) return delay; } while(0)
+
+static long i8042_panic_blink(int state)
+{
+	long delay = 0;
+	char led;
+
+	led = (state) ? 0x01 | 0x04 : 0;
+	while (i8042_read_status() & I8042_STR_IBF)
+		DELAY;
+	dbg("%02x -> i8042 (panic blink)\n", 0xed);
+	i8042_suppress_kbd_ack = 2;
+	i8042_write_data(0xed); /* set leds */
+	DELAY;
+	while (i8042_read_status() & I8042_STR_IBF)
+		DELAY;
+	DELAY;
+	dbg("%02x -> i8042 (panic blink)\n", led);
+	i8042_write_data(led);
+	DELAY;
+	return delay;
+}
+
+#undef DELAY
+
+#ifdef CONFIG_X86
+static void i8042_dritek_enable(void)
+{
+	unsigned char param = 0x90;
+	int error;
+
+	error = i8042_command(&param, 0x1059);
+	if (error)
+		pr_warn("Failed to enable DRITEK extension: %d\n", error);
+}
+#endif
+
+#ifdef CONFIG_PM
+
+/*
+ * Here we try to reset everything back to a state we had
+ * before suspending.
+ */
+
+static int i8042_controller_resume(bool s2r_wants_reset)
+{
+	int error;
+
+	error = i8042_controller_check();
+	if (error)
+		return error;
+
+	if (i8042_reset == I8042_RESET_ALWAYS ||
+	    (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
+		error = i8042_controller_selftest();
+		if (error)
+			return error;
+	}
+
+/*
+ * Restore original CTR value and disable all ports
+ */
+
+	i8042_ctr = i8042_initial_ctr;
+	if (i8042_direct)
+		i8042_ctr &= ~I8042_CTR_XLATE;
+	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
+	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		pr_warn("Can't write CTR to resume, retrying...\n");
+		msleep(50);
+		if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+			pr_err("CTR write retry failed\n");
+			return -EIO;
+		}
+	}
+
+
+#ifdef CONFIG_X86
+	if (i8042_dritek)
+		i8042_dritek_enable();
+#endif
+
+	if (i8042_mux_present) {
+		if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports())
+			pr_warn("failed to resume active multiplexor, mouse won't work\n");
+	} else if (i8042_ports[I8042_AUX_PORT_NO].serio)
+		i8042_enable_aux_port();
+
+	if (i8042_ports[I8042_KBD_PORT_NO].serio)
+		i8042_enable_kbd_port();
+
+	i8042_interrupt(0, NULL);
+
+	return 0;
+}
+
+/*
+ * Here we try to restore the original BIOS settings to avoid
+ * upsetting it.
+ */
+
+static int i8042_pm_suspend(struct device *dev)
+{
+	int i;
+
+	if (pm_suspend_via_firmware())
+		i8042_controller_reset(true);
+
+	/* Set up serio interrupts for system wakeup. */
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (serio && device_may_wakeup(&serio->dev))
+			enable_irq_wake(i8042_ports[i].irq);
+	}
+
+	return 0;
+}
+
+static int i8042_pm_resume_noirq(struct device *dev)
+{
+	if (!pm_resume_via_firmware())
+		i8042_interrupt(0, NULL);
+
+	return 0;
+}
+
+static int i8042_pm_resume(struct device *dev)
+{
+	bool want_reset;
+	int i;
+
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (serio && device_may_wakeup(&serio->dev))
+			disable_irq_wake(i8042_ports[i].irq);
+	}
+
+	/*
+	 * If platform firmware was not going to be involved in suspend, we did
+	 * not restore the controller state to whatever it had been at boot
+	 * time, so we do not need to do anything.
+	 */
+	if (!pm_suspend_via_firmware())
+		return 0;
+
+	/*
+	 * We only need to reset the controller if we are resuming after handing
+	 * off control to the platform firmware, otherwise we can simply restore
+	 * the mode.
+	 */
+	want_reset = pm_resume_via_firmware();
+
+	return i8042_controller_resume(want_reset);
+}
+
+static int i8042_pm_thaw(struct device *dev)
+{
+	i8042_interrupt(0, NULL);
+
+	return 0;
+}
+
+static int i8042_pm_reset(struct device *dev)
+{
+	i8042_controller_reset(false);
+
+	return 0;
+}
+
+static int i8042_pm_restore(struct device *dev)
+{
+	return i8042_controller_resume(false);
+}
+
+static const struct dev_pm_ops i8042_pm_ops = {
+	.suspend	= i8042_pm_suspend,
+	.resume_noirq	= i8042_pm_resume_noirq,
+	.resume		= i8042_pm_resume,
+	.thaw		= i8042_pm_thaw,
+	.poweroff	= i8042_pm_reset,
+	.restore	= i8042_pm_restore,
+};
+
+#endif /* CONFIG_PM */
+
+/*
+ * We need to reset the 8042 back to original mode on system shutdown,
+ * because otherwise BIOSes will be confused.
+ */
+
+static void i8042_shutdown(struct platform_device *dev)
+{
+	i8042_controller_reset(false);
+}
+
+static int i8042_create_kbd_port(void)
+{
+	struct serio *serio;
+	struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO];
+
+	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!serio)
+		return -ENOMEM;
+
+	serio->id.type		= i8042_direct ? SERIO_8042 : SERIO_8042_XL;
+	serio->write		= i8042_dumbkbd ? NULL : i8042_kbd_write;
+	serio->start		= i8042_start;
+	serio->stop		= i8042_stop;
+	serio->close		= i8042_port_close;
+	serio->ps2_cmd_mutex	= &i8042_mutex;
+	serio->port_data	= port;
+	serio->dev.parent	= &i8042_platform_device->dev;
+	strscpy(serio->name, "i8042 KBD port", sizeof(serio->name));
+	strscpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
+	strscpy(serio->firmware_id, i8042_kbd_firmware_id,
+		sizeof(serio->firmware_id));
+	set_primary_fwnode(&serio->dev, i8042_kbd_fwnode);
+
+	port->serio = serio;
+	port->irq = I8042_KBD_IRQ;
+
+	return 0;
+}
+
+static int i8042_create_aux_port(int idx)
+{
+	struct serio *serio;
+	int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx;
+	struct i8042_port *port = &i8042_ports[port_no];
+
+	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!serio)
+		return -ENOMEM;
+
+	serio->id.type		= SERIO_8042;
+	serio->write		= i8042_aux_write;
+	serio->start		= i8042_start;
+	serio->stop		= i8042_stop;
+	serio->ps2_cmd_mutex	= &i8042_mutex;
+	serio->port_data	= port;
+	serio->dev.parent	= &i8042_platform_device->dev;
+	if (idx < 0) {
+		strscpy(serio->name, "i8042 AUX port", sizeof(serio->name));
+		strscpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+		strscpy(serio->firmware_id, i8042_aux_firmware_id,
+			sizeof(serio->firmware_id));
+		serio->close = i8042_port_close;
+	} else {
+		snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx);
+		snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1);
+		strscpy(serio->firmware_id, i8042_aux_firmware_id,
+			sizeof(serio->firmware_id));
+	}
+
+	port->serio = serio;
+	port->mux = idx;
+	port->irq = I8042_AUX_IRQ;
+
+	return 0;
+}
+
+static void i8042_free_kbd_port(void)
+{
+	kfree(i8042_ports[I8042_KBD_PORT_NO].serio);
+	i8042_ports[I8042_KBD_PORT_NO].serio = NULL;
+}
+
+static void i8042_free_aux_ports(void)
+{
+	int i;
+
+	for (i = I8042_AUX_PORT_NO; i < I8042_NUM_PORTS; i++) {
+		kfree(i8042_ports[i].serio);
+		i8042_ports[i].serio = NULL;
+	}
+}
+
+static void i8042_register_ports(void)
+{
+	int i;
+
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (!serio)
+			continue;
+
+		printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
+			serio->name,
+			(unsigned long) I8042_DATA_REG,
+			(unsigned long) I8042_COMMAND_REG,
+			i8042_ports[i].irq);
+		serio_register_port(serio);
+	}
+}
+
+static void i8042_unregister_ports(void)
+{
+	int i;
+
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		if (i8042_ports[i].serio) {
+			serio_unregister_port(i8042_ports[i].serio);
+			i8042_ports[i].serio = NULL;
+		}
+	}
+}
+
+static void i8042_free_irqs(void)
+{
+	if (i8042_aux_irq_registered)
+		free_irq(I8042_AUX_IRQ, i8042_platform_device);
+	if (i8042_kbd_irq_registered)
+		free_irq(I8042_KBD_IRQ, i8042_platform_device);
+
+	i8042_aux_irq_registered = i8042_kbd_irq_registered = false;
+}
+
+static int i8042_setup_aux(void)
+{
+	int (*aux_enable)(void);
+	int error;
+	int i;
+
+	if (i8042_check_aux())
+		return -ENODEV;
+
+	if (i8042_nomux || i8042_check_mux()) {
+		error = i8042_create_aux_port(-1);
+		if (error)
+			goto err_free_ports;
+		aux_enable = i8042_enable_aux_port;
+	} else {
+		for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
+			error = i8042_create_aux_port(i);
+			if (error)
+				goto err_free_ports;
+		}
+		aux_enable = i8042_enable_mux_ports;
+	}
+
+	error = request_irq(I8042_AUX_IRQ, i8042_interrupt, IRQF_SHARED,
+			    "i8042", i8042_platform_device);
+	if (error)
+		goto err_free_ports;
+
+	error = aux_enable();
+	if (error)
+		goto err_free_irq;
+
+	i8042_aux_irq_registered = true;
+	return 0;
+
+ err_free_irq:
+	free_irq(I8042_AUX_IRQ, i8042_platform_device);
+ err_free_ports:
+	i8042_free_aux_ports();
+	return error;
+}
+
+static int i8042_setup_kbd(void)
+{
+	int error;
+
+	error = i8042_create_kbd_port();
+	if (error)
+		return error;
+
+	error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED,
+			    "i8042", i8042_platform_device);
+	if (error)
+		goto err_free_port;
+
+	error = i8042_enable_kbd_port();
+	if (error)
+		goto err_free_irq;
+
+	i8042_kbd_irq_registered = true;
+	return 0;
+
+ err_free_irq:
+	free_irq(I8042_KBD_IRQ, i8042_platform_device);
+ err_free_port:
+	i8042_free_kbd_port();
+	return error;
+}
+
+static int i8042_kbd_bind_notifier(struct notifier_block *nb,
+				   unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct serio *serio = to_serio_port(dev);
+	struct i8042_port *port = serio->port_data;
+
+	if (serio != i8042_ports[I8042_KBD_PORT_NO].serio)
+		return 0;
+
+	switch (action) {
+	case BUS_NOTIFY_BOUND_DRIVER:
+		port->driver_bound = true;
+		break;
+
+	case BUS_NOTIFY_UNBIND_DRIVER:
+		port->driver_bound = false;
+		break;
+	}
+
+	return 0;
+}
+
+static int i8042_probe(struct platform_device *dev)
+{
+	int error;
+
+	if (i8042_reset == I8042_RESET_ALWAYS) {
+		error = i8042_controller_selftest();
+		if (error)
+			return error;
+	}
+
+	error = i8042_controller_init();
+	if (error)
+		return error;
+
+#ifdef CONFIG_X86
+	if (i8042_dritek)
+		i8042_dritek_enable();
+#endif
+
+	if (!i8042_noaux) {
+		error = i8042_setup_aux();
+		if (error && error != -ENODEV && error != -EBUSY)
+			goto out_fail;
+	}
+
+	if (!i8042_nokbd) {
+		error = i8042_setup_kbd();
+		if (error)
+			goto out_fail;
+	}
+/*
+ * Ok, everything is ready, let's register all serio ports
+ */
+	i8042_register_ports();
+
+	return 0;
+
+ out_fail:
+	i8042_free_aux_ports();	/* in case KBD failed but AUX not */
+	i8042_free_irqs();
+	i8042_controller_reset(false);
+
+	return error;
+}
+
+static int i8042_remove(struct platform_device *dev)
+{
+	i8042_unregister_ports();
+	i8042_free_irqs();
+	i8042_controller_reset(false);
+
+	return 0;
+}
+
+static struct platform_driver i8042_driver = {
+	.driver		= {
+		.name	= "i8042",
+#ifdef CONFIG_PM
+		.pm	= &i8042_pm_ops,
+#endif
+	},
+	.probe		= i8042_probe,
+	.remove		= i8042_remove,
+	.shutdown	= i8042_shutdown,
+};
+
+static struct notifier_block i8042_kbd_bind_notifier_block = {
+	.notifier_call = i8042_kbd_bind_notifier,
+};
+
+static int __init i8042_init(void)
+{
+	int err;
+
+	dbg_init();
+
+	err = i8042_platform_init();
+	if (err)
+		return (err == -ENODEV) ? 0 : err;
+
+	err = i8042_controller_check();
+	if (err)
+		goto err_platform_exit;
+
+	/* Set this before creating the dev to allow i8042_command to work right away */
+	i8042_present = true;
+
+	err = platform_driver_register(&i8042_driver);
+	if (err)
+		goto err_platform_exit;
+
+	i8042_platform_device = platform_device_alloc("i8042", -1);
+	if (!i8042_platform_device) {
+		err = -ENOMEM;
+		goto err_unregister_driver;
+	}
+
+	err = platform_device_add(i8042_platform_device);
+	if (err)
+		goto err_free_device;
+
+	bus_register_notifier(&serio_bus, &i8042_kbd_bind_notifier_block);
+	panic_blink = i8042_panic_blink;
+
+	return 0;
+
+err_free_device:
+	platform_device_put(i8042_platform_device);
+err_unregister_driver:
+	platform_driver_unregister(&i8042_driver);
+ err_platform_exit:
+	i8042_platform_exit();
+	return err;
+}
+
+static void __exit i8042_exit(void)
+{
+	if (!i8042_present)
+		return;
+
+	platform_device_unregister(i8042_platform_device);
+	platform_driver_unregister(&i8042_driver);
+	i8042_platform_exit();
+
+	bus_unregister_notifier(&serio_bus, &i8042_kbd_bind_notifier_block);
+	panic_blink = NULL;
+}
+
+module_init(i8042_init);
+module_exit(i8042_exit);