Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 507 insertions, 0 deletions

diff --git a/drivers/input/serio/ps2-gpio.c b/drivers/input/serio/ps2-gpio.c
new file mode 100644
index 0000000000..bc1dc48438
--- /dev/null
+++ b/drivers/input/serio/ps2-gpio.c
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO based serio bus driver for bit banging the PS/2 protocol
+ *
+ * Author: Danilo Krummrich <danilokrummrich@dk-develop.de>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/preempt.h>
+#include <linux/property.h>
+#include <linux/of.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/timekeeping.h>
+
+#define DRIVER_NAME		"ps2-gpio"
+
+#define PS2_MODE_RX		0
+#define PS2_MODE_TX		1
+
+#define PS2_START_BIT		0
+#define PS2_DATA_BIT0		1
+#define PS2_DATA_BIT1		2
+#define PS2_DATA_BIT2		3
+#define PS2_DATA_BIT3		4
+#define PS2_DATA_BIT4		5
+#define PS2_DATA_BIT5		6
+#define PS2_DATA_BIT6		7
+#define PS2_DATA_BIT7		8
+#define PS2_PARITY_BIT		9
+#define PS2_STOP_BIT		10
+#define PS2_ACK_BIT		11
+
+#define PS2_DEV_RET_ACK		0xfa
+#define PS2_DEV_RET_NACK	0xfe
+
+#define PS2_CMD_RESEND		0xfe
+
+/*
+ * The PS2 protocol specifies a clock frequency between 10kHz and 16.7kHz,
+ * therefore the maximal interrupt interval should be 100us and the minimum
+ * interrupt interval should be ~60us. Let's allow +/- 20us for frequency
+ * deviations and interrupt latency.
+ *
+ * The data line must be samples after ~30us to 50us after the falling edge,
+ * since the device updates the data line at the rising edge.
+ *
+ * ___            ______            ______            ______            ___
+ *    \          /      \          /      \          /      \          /
+ *     \        /        \        /        \        /        \        /
+ *      \______/          \______/          \______/          \______/
+ *
+ *     |-----------------|                 |--------|
+ *          60us/100us                      30us/50us
+ */
+#define PS2_CLK_FREQ_MIN_HZ		10000
+#define PS2_CLK_FREQ_MAX_HZ		16700
+#define PS2_CLK_MIN_INTERVAL_US		((1000 * 1000) / PS2_CLK_FREQ_MAX_HZ)
+#define PS2_CLK_MAX_INTERVAL_US		((1000 * 1000) / PS2_CLK_FREQ_MIN_HZ)
+#define PS2_IRQ_MIN_INTERVAL_US		(PS2_CLK_MIN_INTERVAL_US - 20)
+#define PS2_IRQ_MAX_INTERVAL_US		(PS2_CLK_MAX_INTERVAL_US + 20)
+
+struct ps2_gpio_data {
+	struct device *dev;
+	struct serio *serio;
+	unsigned char mode;
+	struct gpio_desc *gpio_clk;
+	struct gpio_desc *gpio_data;
+	bool write_enable;
+	int irq;
+	ktime_t t_irq_now;
+	ktime_t t_irq_last;
+	struct {
+		unsigned char cnt;
+		unsigned char byte;
+	} rx;
+	struct {
+		unsigned char cnt;
+		unsigned char byte;
+		ktime_t t_xfer_start;
+		ktime_t t_xfer_end;
+		struct completion complete;
+		struct mutex mutex;
+		struct delayed_work work;
+	} tx;
+};
+
+static int ps2_gpio_open(struct serio *serio)
+{
+	struct ps2_gpio_data *drvdata = serio->port_data;
+
+	drvdata->t_irq_last = 0;
+	drvdata->tx.t_xfer_end = 0;
+
+	enable_irq(drvdata->irq);
+	return 0;
+}
+
+static void ps2_gpio_close(struct serio *serio)
+{
+	struct ps2_gpio_data *drvdata = serio->port_data;
+
+	flush_delayed_work(&drvdata->tx.work);
+	disable_irq(drvdata->irq);
+}
+
+static int __ps2_gpio_write(struct serio *serio, unsigned char val)
+{
+	struct ps2_gpio_data *drvdata = serio->port_data;
+
+	disable_irq_nosync(drvdata->irq);
+	gpiod_direction_output(drvdata->gpio_clk, 0);
+
+	drvdata->mode = PS2_MODE_TX;
+	drvdata->tx.byte = val;
+
+	schedule_delayed_work(&drvdata->tx.work, usecs_to_jiffies(200));
+
+	return 0;
+}
+
+static int ps2_gpio_write(struct serio *serio, unsigned char val)
+{
+	struct ps2_gpio_data *drvdata = serio->port_data;
+	int ret = 0;
+
+	if (in_task()) {
+		mutex_lock(&drvdata->tx.mutex);
+		__ps2_gpio_write(serio, val);
+		if (!wait_for_completion_timeout(&drvdata->tx.complete,
+						 msecs_to_jiffies(10000)))
+			ret = SERIO_TIMEOUT;
+		mutex_unlock(&drvdata->tx.mutex);
+	} else {
+		__ps2_gpio_write(serio, val);
+	}
+
+	return ret;
+}
+
+static void ps2_gpio_tx_work_fn(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct ps2_gpio_data *drvdata = container_of(dwork,
+						     struct ps2_gpio_data,
+						     tx.work);
+
+	drvdata->tx.t_xfer_start = ktime_get();
+	enable_irq(drvdata->irq);
+	gpiod_direction_output(drvdata->gpio_data, 0);
+	gpiod_direction_input(drvdata->gpio_clk);
+}
+
+static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata)
+{
+	unsigned char byte, cnt;
+	int data;
+	int rxflags = 0;
+	s64 us_delta;
+
+	byte = drvdata->rx.byte;
+	cnt = drvdata->rx.cnt;
+
+	drvdata->t_irq_now = ktime_get();
+
+	/*
+	 * We need to consider spurious interrupts happening right after
+	 * a TX xfer finished.
+	 */
+	us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->tx.t_xfer_end);
+	if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US))
+		goto end;
+
+	us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->t_irq_last);
+	if (us_delta > PS2_IRQ_MAX_INTERVAL_US && cnt) {
+		dev_err(drvdata->dev,
+			"RX: timeout, probably we missed an interrupt\n");
+		goto err;
+	} else if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US)) {
+		/* Ignore spurious IRQs. */
+		goto end;
+	}
+	drvdata->t_irq_last = drvdata->t_irq_now;
+
+	data = gpiod_get_value(drvdata->gpio_data);
+	if (unlikely(data < 0)) {
+		dev_err(drvdata->dev, "RX: failed to get data gpio val: %d\n",
+			data);
+		goto err;
+	}
+
+	switch (cnt) {
+	case PS2_START_BIT:
+		/* start bit should be low */
+		if (unlikely(data)) {
+			dev_err(drvdata->dev, "RX: start bit should be low\n");
+			goto err;
+		}
+		break;
+	case PS2_DATA_BIT0:
+	case PS2_DATA_BIT1:
+	case PS2_DATA_BIT2:
+	case PS2_DATA_BIT3:
+	case PS2_DATA_BIT4:
+	case PS2_DATA_BIT5:
+	case PS2_DATA_BIT6:
+	case PS2_DATA_BIT7:
+		/* processing data bits */
+		if (data)
+			byte |= (data << (cnt - 1));
+		break;
+	case PS2_PARITY_BIT:
+		/* check odd parity */
+		if (!((hweight8(byte) & 1) ^ data)) {
+			rxflags |= SERIO_PARITY;
+			dev_warn(drvdata->dev, "RX: parity error\n");
+			if (!drvdata->write_enable)
+				goto err;
+		}
+		break;
+	case PS2_STOP_BIT:
+		/* stop bit should be high */
+		if (unlikely(!data)) {
+			dev_err(drvdata->dev, "RX: stop bit should be high\n");
+			goto err;
+		}
+
+		/*
+		 * Do not send spurious ACK's and NACK's when write fn is
+		 * not provided.
+		 */
+		if (!drvdata->write_enable) {
+			if (byte == PS2_DEV_RET_NACK)
+				goto err;
+			else if (byte == PS2_DEV_RET_ACK)
+				break;
+		}
+
+		serio_interrupt(drvdata->serio, byte, rxflags);
+		dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte);
+
+		cnt = byte = 0;
+
+		goto end; /* success */
+	default:
+		dev_err(drvdata->dev, "RX: got out of sync with the device\n");
+		goto err;
+	}
+
+	cnt++;
+	goto end; /* success */
+
+err:
+	cnt = byte = 0;
+	__ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND);
+end:
+	drvdata->rx.cnt = cnt;
+	drvdata->rx.byte = byte;
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata)
+{
+	unsigned char byte, cnt;
+	int data;
+	s64 us_delta;
+
+	cnt = drvdata->tx.cnt;
+	byte = drvdata->tx.byte;
+
+	drvdata->t_irq_now = ktime_get();
+
+	/*
+	 * There might be pending IRQs since we disabled IRQs in
+	 * __ps2_gpio_write().  We can expect at least one clock period until
+	 * the device generates the first falling edge after releasing the
+	 * clock line.
+	 */
+	us_delta = ktime_us_delta(drvdata->t_irq_now,
+				  drvdata->tx.t_xfer_start);
+	if (unlikely(us_delta < PS2_CLK_MIN_INTERVAL_US))
+		goto end;
+
+	us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->t_irq_last);
+	if (us_delta > PS2_IRQ_MAX_INTERVAL_US && cnt > 1) {
+		dev_err(drvdata->dev,
+			"TX: timeout, probably we missed an interrupt\n");
+		goto err;
+	} else if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US)) {
+		/* Ignore spurious IRQs. */
+		goto end;
+	}
+	drvdata->t_irq_last = drvdata->t_irq_now;
+
+	switch (cnt) {
+	case PS2_START_BIT:
+		/* should never happen */
+		dev_err(drvdata->dev,
+			"TX: start bit should have been sent already\n");
+		goto err;
+	case PS2_DATA_BIT0:
+	case PS2_DATA_BIT1:
+	case PS2_DATA_BIT2:
+	case PS2_DATA_BIT3:
+	case PS2_DATA_BIT4:
+	case PS2_DATA_BIT5:
+	case PS2_DATA_BIT6:
+	case PS2_DATA_BIT7:
+		data = byte & BIT(cnt - 1);
+		gpiod_set_value(drvdata->gpio_data, data);
+		break;
+	case PS2_PARITY_BIT:
+		/* do odd parity */
+		data = !(hweight8(byte) & 1);
+		gpiod_set_value(drvdata->gpio_data, data);
+		break;
+	case PS2_STOP_BIT:
+		/* release data line to generate stop bit */
+		gpiod_direction_input(drvdata->gpio_data);
+		break;
+	case PS2_ACK_BIT:
+		data = gpiod_get_value(drvdata->gpio_data);
+		if (data) {
+			dev_warn(drvdata->dev, "TX: received NACK, retry\n");
+			goto err;
+		}
+
+		drvdata->tx.t_xfer_end = ktime_get();
+		drvdata->mode = PS2_MODE_RX;
+		complete(&drvdata->tx.complete);
+
+		cnt = 1;
+		goto end; /* success */
+	default:
+		/*
+		 * Probably we missed the stop bit. Therefore we release data
+		 * line and try again.
+		 */
+		gpiod_direction_input(drvdata->gpio_data);
+		dev_err(drvdata->dev, "TX: got out of sync with the device\n");
+		goto err;
+	}
+
+	cnt++;
+	goto end; /* success */
+
+err:
+	cnt = 1;
+	gpiod_direction_input(drvdata->gpio_data);
+	__ps2_gpio_write(drvdata->serio, drvdata->tx.byte);
+end:
+	drvdata->tx.cnt = cnt;
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ps2_gpio_irq(int irq, void *dev_id)
+{
+	struct ps2_gpio_data *drvdata = dev_id;
+
+	return drvdata->mode ? ps2_gpio_irq_tx(drvdata) :
+		ps2_gpio_irq_rx(drvdata);
+}
+
+static int ps2_gpio_get_props(struct device *dev,
+				 struct ps2_gpio_data *drvdata)
+{
+	enum gpiod_flags gflags;
+
+	/* Enforce open drain, since this is required by the PS/2 bus. */
+	gflags = GPIOD_IN | GPIOD_FLAGS_BIT_OPEN_DRAIN;
+
+	drvdata->gpio_data = devm_gpiod_get(dev, "data", gflags);
+	if (IS_ERR(drvdata->gpio_data)) {
+		dev_err(dev, "failed to request data gpio: %ld",
+			PTR_ERR(drvdata->gpio_data));
+		return PTR_ERR(drvdata->gpio_data);
+	}
+
+	drvdata->gpio_clk = devm_gpiod_get(dev, "clk", gflags);
+	if (IS_ERR(drvdata->gpio_clk)) {
+		dev_err(dev, "failed to request clock gpio: %ld",
+			PTR_ERR(drvdata->gpio_clk));
+		return PTR_ERR(drvdata->gpio_clk);
+	}
+
+	drvdata->write_enable = device_property_read_bool(dev,
+				"write-enable");
+
+	return 0;
+}
+
+static int ps2_gpio_probe(struct platform_device *pdev)
+{
+	struct ps2_gpio_data *drvdata;
+	struct serio *serio;
+	struct device *dev = &pdev->dev;
+	int error;
+
+	drvdata = devm_kzalloc(dev, sizeof(struct ps2_gpio_data), GFP_KERNEL);
+	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!drvdata || !serio) {
+		error = -ENOMEM;
+		goto err_free_serio;
+	}
+
+	error = ps2_gpio_get_props(dev, drvdata);
+	if (error)
+		goto err_free_serio;
+
+	if (gpiod_cansleep(drvdata->gpio_data) ||
+	    gpiod_cansleep(drvdata->gpio_clk)) {
+		dev_err(dev, "GPIO data or clk are connected via slow bus\n");
+		error = -EINVAL;
+		goto err_free_serio;
+	}
+
+	drvdata->irq = platform_get_irq(pdev, 0);
+	if (drvdata->irq < 0) {
+		error = drvdata->irq;
+		goto err_free_serio;
+	}
+
+	error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq,
+				 IRQF_NO_THREAD, DRIVER_NAME, drvdata);
+	if (error) {
+		dev_err(dev, "failed to request irq %d: %d\n",
+			drvdata->irq, error);
+		goto err_free_serio;
+	}
+
+	/* Keep irq disabled until serio->open is called. */
+	disable_irq(drvdata->irq);
+
+	serio->id.type = SERIO_8042;
+	serio->open = ps2_gpio_open;
+	serio->close = ps2_gpio_close;
+	/*
+	 * Write can be enabled in platform/dt data, but possibly it will not
+	 * work because of the tough timings.
+	 */
+	serio->write = drvdata->write_enable ? ps2_gpio_write : NULL;
+	serio->port_data = drvdata;
+	serio->dev.parent = dev;
+	strscpy(serio->name, dev_name(dev), sizeof(serio->name));
+	strscpy(serio->phys, dev_name(dev), sizeof(serio->phys));
+
+	drvdata->serio = serio;
+	drvdata->dev = dev;
+	drvdata->mode = PS2_MODE_RX;
+
+	/*
+	 * Tx count always starts at 1, as the start bit is sent implicitly by
+	 * host-to-device communication initialization.
+	 */
+	drvdata->tx.cnt = 1;
+
+	INIT_DELAYED_WORK(&drvdata->tx.work, ps2_gpio_tx_work_fn);
+	init_completion(&drvdata->tx.complete);
+	mutex_init(&drvdata->tx.mutex);
+
+	serio_register_port(serio);
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;	/* success */
+
+err_free_serio:
+	kfree(serio);
+	return error;
+}
+
+static int ps2_gpio_remove(struct platform_device *pdev)
+{
+	struct ps2_gpio_data *drvdata = platform_get_drvdata(pdev);
+
+	serio_unregister_port(drvdata->serio);
+	return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id ps2_gpio_match[] = {
+	{ .compatible = "ps2-gpio", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ps2_gpio_match);
+#endif
+
+static struct platform_driver ps2_gpio_driver = {
+	.probe		= ps2_gpio_probe,
+	.remove		= ps2_gpio_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = of_match_ptr(ps2_gpio_match),
+	},
+};
+module_platform_driver(ps2_gpio_driver);
+
+MODULE_AUTHOR("Danilo Krummrich <danilokrummrich@dk-develop.de>");
+MODULE_DESCRIPTION("GPIO PS2 driver");
+MODULE_LICENSE("GPL v2");