Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3475 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
new file mode 100644
index 0000000000..20094b9899
--- /dev/null
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -0,0 +1,3475 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Atmel maXTouch Touchscreen driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Copyright (C) 2011-2014 Atmel Corporation
+ * Copyright (C) 2012 Google, Inc.
+ * Copyright (C) 2016 Zodiac Inflight Innovations
+ *
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+#include <asm/unaligned.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/videobuf2-vmalloc.h>
+#include <dt-bindings/input/atmel-maxtouch.h>
+
+/* Firmware files */
+#define MXT_FW_NAME		"maxtouch.fw"
+#define MXT_CFG_NAME		"maxtouch.cfg"
+#define MXT_CFG_MAGIC		"OBP_RAW V1"
+
+/* Registers */
+#define MXT_OBJECT_START	0x07
+#define MXT_OBJECT_SIZE		6
+#define MXT_INFO_CHECKSUM_SIZE	3
+#define MXT_MAX_BLOCK_WRITE	256
+
+/* Object types */
+#define MXT_DEBUG_DIAGNOSTIC_T37	37
+#define MXT_GEN_MESSAGE_T5		5
+#define MXT_GEN_COMMAND_T6		6
+#define MXT_GEN_POWER_T7		7
+#define MXT_GEN_ACQUIRE_T8		8
+#define MXT_GEN_DATASOURCE_T53		53
+#define MXT_TOUCH_MULTI_T9		9
+#define MXT_TOUCH_KEYARRAY_T15		15
+#define MXT_TOUCH_PROXIMITY_T23		23
+#define MXT_TOUCH_PROXKEY_T52		52
+#define MXT_TOUCH_PTC_KEYS_T97		97
+#define MXT_PROCI_GRIPFACE_T20		20
+#define MXT_PROCG_NOISE_T22		22
+#define MXT_PROCI_ONETOUCH_T24		24
+#define MXT_PROCI_TWOTOUCH_T27		27
+#define MXT_PROCI_GRIP_T40		40
+#define MXT_PROCI_PALM_T41		41
+#define MXT_PROCI_TOUCHSUPPRESSION_T42	42
+#define MXT_PROCI_STYLUS_T47		47
+#define MXT_PROCG_NOISESUPPRESSION_T48	48
+#define MXT_SPT_COMMSCONFIG_T18		18
+#define MXT_SPT_GPIOPWM_T19		19
+#define MXT_SPT_SELFTEST_T25		25
+#define MXT_SPT_CTECONFIG_T28		28
+#define MXT_SPT_USERDATA_T38		38
+#define MXT_SPT_DIGITIZER_T43		43
+#define MXT_SPT_MESSAGECOUNT_T44	44
+#define MXT_SPT_CTECONFIG_T46		46
+#define MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71 71
+#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
+
+/* MXT_GEN_MESSAGE_T5 object */
+#define MXT_RPTID_NOMSG		0xff
+
+/* MXT_GEN_COMMAND_T6 field */
+#define MXT_COMMAND_RESET	0
+#define MXT_COMMAND_BACKUPNV	1
+#define MXT_COMMAND_CALIBRATE	2
+#define MXT_COMMAND_REPORTALL	3
+#define MXT_COMMAND_DIAGNOSTIC	5
+
+/* Define for T6 status byte */
+#define MXT_T6_STATUS_RESET	BIT(7)
+#define MXT_T6_STATUS_OFL	BIT(6)
+#define MXT_T6_STATUS_SIGERR	BIT(5)
+#define MXT_T6_STATUS_CAL	BIT(4)
+#define MXT_T6_STATUS_CFGERR	BIT(3)
+#define MXT_T6_STATUS_COMSERR	BIT(2)
+
+/* MXT_GEN_POWER_T7 field */
+struct t7_config {
+	u8 idle;
+	u8 active;
+} __packed;
+
+#define MXT_POWER_CFG_RUN		0
+#define MXT_POWER_CFG_DEEPSLEEP		1
+
+/* MXT_TOUCH_MULTI_T9 field */
+#define MXT_T9_CTRL		0
+#define MXT_T9_XSIZE		3
+#define MXT_T9_YSIZE		4
+#define MXT_T9_ORIENT		9
+#define MXT_T9_RANGE		18
+
+/* MXT_TOUCH_MULTI_T9 status */
+#define MXT_T9_UNGRIP		BIT(0)
+#define MXT_T9_SUPPRESS		BIT(1)
+#define MXT_T9_AMP		BIT(2)
+#define MXT_T9_VECTOR		BIT(3)
+#define MXT_T9_MOVE		BIT(4)
+#define MXT_T9_RELEASE		BIT(5)
+#define MXT_T9_PRESS		BIT(6)
+#define MXT_T9_DETECT		BIT(7)
+
+struct t9_range {
+	__le16 x;
+	__le16 y;
+} __packed;
+
+/* MXT_TOUCH_MULTI_T9 orient */
+#define MXT_T9_ORIENT_SWITCH	BIT(0)
+#define MXT_T9_ORIENT_INVERTX	BIT(1)
+#define MXT_T9_ORIENT_INVERTY	BIT(2)
+
+/* MXT_SPT_COMMSCONFIG_T18 */
+#define MXT_COMMS_CTRL		0
+#define MXT_COMMS_CMD		1
+#define MXT_COMMS_RETRIGEN	BIT(6)
+
+/* MXT_DEBUG_DIAGNOSTIC_T37 */
+#define MXT_DIAGNOSTIC_PAGEUP	0x01
+#define MXT_DIAGNOSTIC_DELTAS	0x10
+#define MXT_DIAGNOSTIC_REFS	0x11
+#define MXT_DIAGNOSTIC_SIZE	128
+
+#define MXT_FAMILY_1386			160
+#define MXT1386_COLUMNS			3
+#define MXT1386_PAGES_PER_COLUMN	8
+
+struct t37_debug {
+#ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT_T37
+	u8 mode;
+	u8 page;
+	u8 data[MXT_DIAGNOSTIC_SIZE];
+#endif
+};
+
+/* Define for MXT_GEN_COMMAND_T6 */
+#define MXT_BOOT_VALUE		0xa5
+#define MXT_RESET_VALUE		0x01
+#define MXT_BACKUP_VALUE	0x55
+
+/* T100 Multiple Touch Touchscreen */
+#define MXT_T100_CTRL		0
+#define MXT_T100_CFG1		1
+#define MXT_T100_TCHAUX		3
+#define MXT_T100_XSIZE		9
+#define MXT_T100_XRANGE		13
+#define MXT_T100_YSIZE		20
+#define MXT_T100_YRANGE		24
+
+#define MXT_T100_CFG_SWITCHXY	BIT(5)
+#define MXT_T100_CFG_INVERTY	BIT(6)
+#define MXT_T100_CFG_INVERTX	BIT(7)
+
+#define MXT_T100_TCHAUX_VECT	BIT(0)
+#define MXT_T100_TCHAUX_AMPL	BIT(1)
+#define MXT_T100_TCHAUX_AREA	BIT(2)
+
+#define MXT_T100_DETECT		BIT(7)
+#define MXT_T100_TYPE_MASK	0x70
+
+enum t100_type {
+	MXT_T100_TYPE_FINGER		= 1,
+	MXT_T100_TYPE_PASSIVE_STYLUS	= 2,
+	MXT_T100_TYPE_HOVERING_FINGER	= 4,
+	MXT_T100_TYPE_GLOVE		= 5,
+	MXT_T100_TYPE_LARGE_TOUCH	= 6,
+};
+
+#define MXT_DISTANCE_ACTIVE_TOUCH	0
+#define MXT_DISTANCE_HOVERING		1
+
+#define MXT_TOUCH_MAJOR_DEFAULT		1
+#define MXT_PRESSURE_DEFAULT		1
+
+/* Delay times */
+#define MXT_BACKUP_TIME		50	/* msec */
+#define MXT_RESET_GPIO_TIME	20	/* msec */
+#define MXT_RESET_INVALID_CHG	100	/* msec */
+#define MXT_RESET_TIME		200	/* msec */
+#define MXT_RESET_TIMEOUT	3000	/* msec */
+#define MXT_CRC_TIMEOUT		1000	/* msec */
+#define MXT_FW_RESET_TIME	3000	/* msec */
+#define MXT_FW_CHG_TIMEOUT	300	/* msec */
+#define MXT_WAKEUP_TIME		25	/* msec */
+
+/* Command to unlock bootloader */
+#define MXT_UNLOCK_CMD_MSB	0xaa
+#define MXT_UNLOCK_CMD_LSB	0xdc
+
+/* Bootloader mode status */
+#define MXT_WAITING_BOOTLOAD_CMD	0xc0	/* valid 7 6 bit only */
+#define MXT_WAITING_FRAME_DATA	0x80	/* valid 7 6 bit only */
+#define MXT_FRAME_CRC_CHECK	0x02
+#define MXT_FRAME_CRC_FAIL	0x03
+#define MXT_FRAME_CRC_PASS	0x04
+#define MXT_APP_CRC_FAIL	0x40	/* valid 7 8 bit only */
+#define MXT_BOOT_STATUS_MASK	0x3f
+#define MXT_BOOT_EXTENDED_ID	BIT(5)
+#define MXT_BOOT_ID_MASK	0x1f
+
+/* Touchscreen absolute values */
+#define MXT_MAX_AREA		0xff
+
+#define MXT_PIXELS_PER_MM	20
+
+struct mxt_info {
+	u8 family_id;
+	u8 variant_id;
+	u8 version;
+	u8 build;
+	u8 matrix_xsize;
+	u8 matrix_ysize;
+	u8 object_num;
+};
+
+struct mxt_object {
+	u8 type;
+	u16 start_address;
+	u8 size_minus_one;
+	u8 instances_minus_one;
+	u8 num_report_ids;
+} __packed;
+
+struct mxt_dbg {
+	u16 t37_address;
+	u16 diag_cmd_address;
+	struct t37_debug *t37_buf;
+	unsigned int t37_pages;
+	unsigned int t37_nodes;
+
+	struct v4l2_device v4l2;
+	struct v4l2_pix_format format;
+	struct video_device vdev;
+	struct vb2_queue queue;
+	struct mutex lock;
+	int input;
+};
+
+enum v4l_dbg_inputs {
+	MXT_V4L_INPUT_DELTAS,
+	MXT_V4L_INPUT_REFS,
+	MXT_V4L_INPUT_MAX,
+};
+
+enum mxt_suspend_mode {
+	MXT_SUSPEND_DEEP_SLEEP	= 0,
+	MXT_SUSPEND_T9_CTRL	= 1,
+};
+
+/* Config update context */
+struct mxt_cfg {
+	u8 *raw;
+	size_t raw_size;
+	off_t raw_pos;
+
+	u8 *mem;
+	size_t mem_size;
+	int start_ofs;
+
+	struct mxt_info info;
+};
+
+/* Each client has this additional data */
+struct mxt_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	char phys[64];		/* device physical location */
+	struct mxt_object *object_table;
+	struct mxt_info *info;
+	void *raw_info_block;
+	unsigned int irq;
+	unsigned int max_x;
+	unsigned int max_y;
+	bool invertx;
+	bool inverty;
+	bool xy_switch;
+	u8 xsize;
+	u8 ysize;
+	bool in_bootloader;
+	u16 mem_size;
+	u8 t100_aux_ampl;
+	u8 t100_aux_area;
+	u8 t100_aux_vect;
+	u8 max_reportid;
+	u32 config_crc;
+	u32 info_crc;
+	u8 bootloader_addr;
+	u8 *msg_buf;
+	u8 t6_status;
+	bool update_input;
+	u8 last_message_count;
+	u8 num_touchids;
+	u8 multitouch;
+	struct t7_config t7_cfg;
+	struct mxt_dbg dbg;
+	struct regulator_bulk_data regulators[2];
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *wake_gpio;
+	bool use_retrigen_workaround;
+
+	/* Cached parameters from object table */
+	u16 T5_address;
+	u8 T5_msg_size;
+	u8 T6_reportid;
+	u16 T6_address;
+	u16 T7_address;
+	u16 T71_address;
+	u8 T9_reportid_min;
+	u8 T9_reportid_max;
+	u8 T15_reportid_min;
+	u8 T15_reportid_max;
+	u16 T18_address;
+	u8 T19_reportid;
+	u16 T44_address;
+	u8 T97_reportid_min;
+	u8 T97_reportid_max;
+	u8 T100_reportid_min;
+	u8 T100_reportid_max;
+
+	/* for fw update in bootloader */
+	struct completion bl_completion;
+
+	/* for reset handling */
+	struct completion reset_completion;
+
+	/* for config update handling */
+	struct completion crc_completion;
+
+	u32 *t19_keymap;
+	unsigned int t19_num_keys;
+
+	u32 *t15_keymap;
+	unsigned int t15_num_keys;
+
+	enum mxt_suspend_mode suspend_mode;
+
+	u32 wakeup_method;
+};
+
+struct mxt_vb2_buffer {
+	struct vb2_buffer	vb;
+	struct list_head	list;
+};
+
+static size_t mxt_obj_size(const struct mxt_object *obj)
+{
+	return obj->size_minus_one + 1;
+}
+
+static size_t mxt_obj_instances(const struct mxt_object *obj)
+{
+	return obj->instances_minus_one + 1;
+}
+
+static bool mxt_object_readable(unsigned int type)
+{
+	switch (type) {
+	case MXT_GEN_COMMAND_T6:
+	case MXT_GEN_POWER_T7:
+	case MXT_GEN_ACQUIRE_T8:
+	case MXT_GEN_DATASOURCE_T53:
+	case MXT_TOUCH_MULTI_T9:
+	case MXT_TOUCH_KEYARRAY_T15:
+	case MXT_TOUCH_PROXIMITY_T23:
+	case MXT_TOUCH_PROXKEY_T52:
+	case MXT_TOUCH_PTC_KEYS_T97:
+	case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+	case MXT_PROCI_GRIPFACE_T20:
+	case MXT_PROCG_NOISE_T22:
+	case MXT_PROCI_ONETOUCH_T24:
+	case MXT_PROCI_TWOTOUCH_T27:
+	case MXT_PROCI_GRIP_T40:
+	case MXT_PROCI_PALM_T41:
+	case MXT_PROCI_TOUCHSUPPRESSION_T42:
+	case MXT_PROCI_STYLUS_T47:
+	case MXT_PROCG_NOISESUPPRESSION_T48:
+	case MXT_SPT_COMMSCONFIG_T18:
+	case MXT_SPT_GPIOPWM_T19:
+	case MXT_SPT_SELFTEST_T25:
+	case MXT_SPT_CTECONFIG_T28:
+	case MXT_SPT_USERDATA_T38:
+	case MXT_SPT_DIGITIZER_T43:
+	case MXT_SPT_CTECONFIG_T46:
+	case MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static void mxt_dump_message(struct mxt_data *data, u8 *message)
+{
+	dev_dbg(&data->client->dev, "message: %*ph\n",
+		data->T5_msg_size, message);
+}
+
+static int mxt_wait_for_completion(struct mxt_data *data,
+				   struct completion *comp,
+				   unsigned int timeout_ms)
+{
+	struct device *dev = &data->client->dev;
+	unsigned long timeout = msecs_to_jiffies(timeout_ms);
+	long ret;
+
+	ret = wait_for_completion_interruptible_timeout(comp, timeout);
+	if (ret < 0) {
+		return ret;
+	} else if (ret == 0) {
+		dev_err(dev, "Wait for completion timed out.\n");
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static int mxt_bootloader_read(struct mxt_data *data,
+			       u8 *val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.flags |= I2C_M_RD;
+	msg.len = count;
+	msg.buf = val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_bootloader_write(struct mxt_data *data,
+				const u8 * const val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.len = count;
+	msg.buf = (u8 *)val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c send failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
+{
+	u8 appmode = data->client->addr;
+	u8 bootloader;
+	u8 family_id = data->info ? data->info->family_id : 0;
+
+	switch (appmode) {
+	case 0x4a:
+	case 0x4b:
+		/* Chips after 1664S use different scheme */
+		if (retry || family_id >= 0xa2) {
+			bootloader = appmode - 0x24;
+			break;
+		}
+		fallthrough;	/* for normal case */
+	case 0x4c:
+	case 0x4d:
+	case 0x5a:
+	case 0x5b:
+		bootloader = appmode - 0x26;
+		break;
+
+	default:
+		dev_err(&data->client->dev,
+			"Appmode i2c address 0x%02x not found\n",
+			appmode);
+		return -EINVAL;
+	}
+
+	data->bootloader_addr = bootloader;
+	return 0;
+}
+
+static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
+{
+	struct device *dev = &data->client->dev;
+	int error;
+	u8 val;
+	bool crc_failure;
+
+	error = mxt_lookup_bootloader_address(data, alt_address);
+	if (error)
+		return error;
+
+	error = mxt_bootloader_read(data, &val, 1);
+	if (error)
+		return error;
+
+	/* Check app crc fail mode */
+	crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
+
+	dev_err(dev, "Detected bootloader, status:%02X%s\n",
+			val, crc_failure ? ", APP_CRC_FAIL" : "");
+
+	return 0;
+}
+
+static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
+{
+	struct device *dev = &data->client->dev;
+	u8 buf[3];
+
+	if (val & MXT_BOOT_EXTENDED_ID) {
+		if (mxt_bootloader_read(data, &buf[0], 3) != 0) {
+			dev_err(dev, "%s: i2c failure\n", __func__);
+			return val;
+		}
+
+		dev_dbg(dev, "Bootloader ID:%d Version:%d\n", buf[1], buf[2]);
+
+		return buf[0];
+	} else {
+		dev_dbg(dev, "Bootloader ID:%d\n", val & MXT_BOOT_ID_MASK);
+
+		return val;
+	}
+}
+
+static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
+				bool wait)
+{
+	struct device *dev = &data->client->dev;
+	u8 val;
+	int ret;
+
+recheck:
+	if (wait) {
+		/*
+		 * In application update mode, the interrupt
+		 * line signals state transitions. We must wait for the
+		 * CHG assertion before reading the status byte.
+		 * Once the status byte has been read, the line is deasserted.
+		 */
+		ret = mxt_wait_for_completion(data, &data->bl_completion,
+					      MXT_FW_CHG_TIMEOUT);
+		if (ret) {
+			/*
+			 * TODO: handle -ERESTARTSYS better by terminating
+			 * fw update process before returning to userspace
+			 * by writing length 0x000 to device (iff we are in
+			 * WAITING_FRAME_DATA state).
+			 */
+			dev_err(dev, "Update wait error %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = mxt_bootloader_read(data, &val, 1);
+	if (ret)
+		return ret;
+
+	if (state == MXT_WAITING_BOOTLOAD_CMD)
+		val = mxt_get_bootloader_version(data, val);
+
+	switch (state) {
+	case MXT_WAITING_BOOTLOAD_CMD:
+	case MXT_WAITING_FRAME_DATA:
+	case MXT_APP_CRC_FAIL:
+		val &= ~MXT_BOOT_STATUS_MASK;
+		break;
+	case MXT_FRAME_CRC_PASS:
+		if (val == MXT_FRAME_CRC_CHECK) {
+			goto recheck;
+		} else if (val == MXT_FRAME_CRC_FAIL) {
+			dev_err(dev, "Bootloader CRC fail\n");
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (val != state) {
+		dev_err(dev, "Invalid bootloader state %02X != %02X\n",
+			val, state);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
+{
+	u8 buf[2];
+
+	if (unlock) {
+		buf[0] = MXT_UNLOCK_CMD_LSB;
+		buf[1] = MXT_UNLOCK_CMD_MSB;
+	} else {
+		buf[0] = 0x01;
+		buf[1] = 0x01;
+	}
+
+	return mxt_bootloader_write(data, buf, sizeof(buf));
+}
+
+static bool mxt_wakeup_toggle(struct i2c_client *client,
+			      bool wake_up, bool in_i2c)
+{
+	struct mxt_data *data = i2c_get_clientdata(client);
+
+	switch (data->wakeup_method) {
+	case ATMEL_MXT_WAKEUP_I2C_SCL:
+		if (!in_i2c)
+			return false;
+		break;
+
+	case ATMEL_MXT_WAKEUP_GPIO:
+		if (in_i2c)
+			return false;
+
+		gpiod_set_value(data->wake_gpio, wake_up);
+		break;
+
+	default:
+		return false;
+	}
+
+	if (wake_up) {
+		dev_dbg(&client->dev, "waking up controller\n");
+
+		msleep(MXT_WAKEUP_TIME);
+	}
+
+	return true;
+}
+
+static int __mxt_read_reg(struct i2c_client *client,
+			       u16 reg, u16 len, void *val)
+{
+	struct i2c_msg xfer[2];
+	bool retried = false;
+	u8 buf[2];
+	int ret;
+
+	buf[0] = reg & 0xff;
+	buf[1] = (reg >> 8) & 0xff;
+
+	/* Write register */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 2;
+	xfer[0].buf = buf;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = len;
+	xfer[1].buf = val;
+
+retry:
+	ret = i2c_transfer(client->adapter, xfer, 2);
+	if (ret == 2) {
+		ret = 0;
+	} else if (!retried && mxt_wakeup_toggle(client, true, true)) {
+		retried = true;
+		goto retry;
+	} else {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
+			   const void *val)
+{
+	bool retried = false;
+	u8 *buf;
+	size_t count;
+	int ret;
+
+	count = len + 2;
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = reg & 0xff;
+	buf[1] = (reg >> 8) & 0xff;
+	memcpy(&buf[2], val, len);
+
+retry:
+	ret = i2c_master_send(client, buf, count);
+	if (ret == count) {
+		ret = 0;
+	} else if (!retried && mxt_wakeup_toggle(client, true, true)) {
+		retried = true;
+		goto retry;
+	} else {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "%s: i2c send failed (%d)\n",
+			__func__, ret);
+	}
+
+	kfree(buf);
+	return ret;
+}
+
+static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
+{
+	return __mxt_write_reg(client, reg, 1, &val);
+}
+
+static struct mxt_object *
+mxt_get_object(struct mxt_data *data, u8 type)
+{
+	struct mxt_object *object;
+	int i;
+
+	for (i = 0; i < data->info->object_num; i++) {
+		object = data->object_table + i;
+		if (object->type == type)
+			return object;
+	}
+
+	dev_warn(&data->client->dev, "Invalid object type T%u\n", type);
+	return NULL;
+}
+
+static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
+{
+	struct device *dev = &data->client->dev;
+	u8 status = msg[1];
+	u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16);
+
+	if (crc != data->config_crc) {
+		data->config_crc = crc;
+		dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc);
+	}
+
+	complete(&data->crc_completion);
+
+	/* Detect reset */
+	if (status & MXT_T6_STATUS_RESET)
+		complete(&data->reset_completion);
+
+	/* Output debug if status has changed */
+	if (status != data->t6_status)
+		dev_dbg(dev, "T6 Status 0x%02X%s%s%s%s%s%s%s\n",
+			status,
+			status == 0 ? " OK" : "",
+			status & MXT_T6_STATUS_RESET ? " RESET" : "",
+			status & MXT_T6_STATUS_OFL ? " OFL" : "",
+			status & MXT_T6_STATUS_SIGERR ? " SIGERR" : "",
+			status & MXT_T6_STATUS_CAL ? " CAL" : "",
+			status & MXT_T6_STATUS_CFGERR ? " CFGERR" : "",
+			status & MXT_T6_STATUS_COMSERR ? " COMSERR" : "");
+
+	/* Save current status */
+	data->t6_status = status;
+}
+
+static int mxt_write_object(struct mxt_data *data,
+				 u8 type, u8 offset, u8 val)
+{
+	struct mxt_object *object;
+	u16 reg;
+
+	object = mxt_get_object(data, type);
+	if (!object || offset >= mxt_obj_size(object))
+		return -EINVAL;
+
+	reg = object->start_address;
+	return mxt_write_reg(data->client, reg + offset, val);
+}
+
+static void mxt_input_button(struct mxt_data *data, u8 *message)
+{
+	struct input_dev *input = data->input_dev;
+	int i;
+
+	for (i = 0; i < data->t19_num_keys; i++) {
+		if (data->t19_keymap[i] == KEY_RESERVED)
+			continue;
+
+		/* Active-low switch */
+		input_report_key(input, data->t19_keymap[i],
+				 !(message[1] & BIT(i)));
+	}
+}
+
+static void mxt_input_sync(struct mxt_data *data)
+{
+	input_mt_report_pointer_emulation(data->input_dev,
+					  data->t19_num_keys);
+	input_sync(data->input_dev);
+}
+
+static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
+{
+	struct device *dev = &data->client->dev;
+	struct input_dev *input_dev = data->input_dev;
+	int id;
+	u8 status;
+	int x;
+	int y;
+	int area;
+	int amplitude;
+
+	id = message[0] - data->T9_reportid_min;
+	status = message[1];
+	x = (message[2] << 4) | ((message[4] >> 4) & 0xf);
+	y = (message[3] << 4) | ((message[4] & 0xf));
+
+	/* Handle 10/12 bit switching */
+	if (data->max_x < 1024)
+		x >>= 2;
+	if (data->max_y < 1024)
+		y >>= 2;
+
+	area = message[5];
+	amplitude = message[6];
+
+	dev_dbg(dev,
+		"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
+		id,
+		(status & MXT_T9_DETECT) ? 'D' : '.',
+		(status & MXT_T9_PRESS) ? 'P' : '.',
+		(status & MXT_T9_RELEASE) ? 'R' : '.',
+		(status & MXT_T9_MOVE) ? 'M' : '.',
+		(status & MXT_T9_VECTOR) ? 'V' : '.',
+		(status & MXT_T9_AMP) ? 'A' : '.',
+		(status & MXT_T9_SUPPRESS) ? 'S' : '.',
+		(status & MXT_T9_UNGRIP) ? 'U' : '.',
+		x, y, area, amplitude);
+
+	input_mt_slot(input_dev, id);
+
+	if (status & MXT_T9_DETECT) {
+		/*
+		 * Multiple bits may be set if the host is slow to read
+		 * the status messages, indicating all the events that
+		 * have happened.
+		 */
+		if (status & MXT_T9_RELEASE) {
+			input_mt_report_slot_inactive(input_dev);
+			mxt_input_sync(data);
+		}
+
+		/* if active, pressure must be non-zero */
+		if (!amplitude)
+			amplitude = MXT_PRESSURE_DEFAULT;
+
+		/* Touch active */
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude);
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
+	} else {
+		/* Touch no longer active, close out slot */
+		input_mt_report_slot_inactive(input_dev);
+	}
+
+	data->update_input = true;
+}
+
+static void mxt_proc_t15_messages(struct mxt_data *data, u8 *message)
+{
+	struct input_dev *input_dev = data->input_dev;
+	unsigned long keystates = get_unaligned_le32(&message[2]);
+	int key;
+
+	for (key = 0; key < data->t15_num_keys; key++)
+		input_report_key(input_dev, data->t15_keymap[key],
+				 keystates & BIT(key));
+
+	data->update_input = true;
+}
+
+static void mxt_proc_t97_messages(struct mxt_data *data, u8 *message)
+{
+	mxt_proc_t15_messages(data, message);
+}
+
+static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
+{
+	struct device *dev = &data->client->dev;
+	struct input_dev *input_dev = data->input_dev;
+	int id;
+	u8 status;
+	u8 type = 0;
+	u16 x;
+	u16 y;
+	int distance = 0;
+	int tool = 0;
+	u8 major = 0;
+	u8 pressure = 0;
+	u8 orientation = 0;
+
+	id = message[0] - data->T100_reportid_min - 2;
+
+	/* ignore SCRSTATUS events */
+	if (id < 0)
+		return;
+
+	status = message[1];
+	x = get_unaligned_le16(&message[2]);
+	y = get_unaligned_le16(&message[4]);
+
+	if (status & MXT_T100_DETECT) {
+		type = (status & MXT_T100_TYPE_MASK) >> 4;
+
+		switch (type) {
+		case MXT_T100_TYPE_HOVERING_FINGER:
+			tool = MT_TOOL_FINGER;
+			distance = MXT_DISTANCE_HOVERING;
+
+			if (data->t100_aux_vect)
+				orientation = message[data->t100_aux_vect];
+
+			break;
+
+		case MXT_T100_TYPE_FINGER:
+		case MXT_T100_TYPE_GLOVE:
+			tool = MT_TOOL_FINGER;
+			distance = MXT_DISTANCE_ACTIVE_TOUCH;
+
+			if (data->t100_aux_area)
+				major = message[data->t100_aux_area];
+
+			if (data->t100_aux_ampl)
+				pressure = message[data->t100_aux_ampl];
+
+			if (data->t100_aux_vect)
+				orientation = message[data->t100_aux_vect];
+
+			break;
+
+		case MXT_T100_TYPE_PASSIVE_STYLUS:
+			tool = MT_TOOL_PEN;
+
+			/*
+			 * Passive stylus is reported with size zero so
+			 * hardcode.
+			 */
+			major = MXT_TOUCH_MAJOR_DEFAULT;
+
+			if (data->t100_aux_ampl)
+				pressure = message[data->t100_aux_ampl];
+
+			break;
+
+		case MXT_T100_TYPE_LARGE_TOUCH:
+			/* Ignore suppressed touch */
+			break;
+
+		default:
+			dev_dbg(dev, "Unexpected T100 type\n");
+			return;
+		}
+	}
+
+	/*
+	 * Values reported should be non-zero if tool is touching the
+	 * device
+	 */
+	if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER)
+		pressure = MXT_PRESSURE_DEFAULT;
+
+	input_mt_slot(input_dev, id);
+
+	if (status & MXT_T100_DETECT) {
+		dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n",
+			id, type, x, y, major, pressure, orientation);
+
+		input_mt_report_slot_state(input_dev, tool, 1);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, major);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+		input_report_abs(input_dev, ABS_MT_DISTANCE, distance);
+		input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation);
+	} else {
+		dev_dbg(dev, "[%u] release\n", id);
+
+		/* close out slot */
+		input_mt_report_slot_inactive(input_dev);
+	}
+
+	data->update_input = true;
+}
+
+static int mxt_proc_message(struct mxt_data *data, u8 *message)
+{
+	u8 report_id = message[0];
+
+	if (report_id == MXT_RPTID_NOMSG)
+		return 0;
+
+	if (report_id == data->T6_reportid) {
+		mxt_proc_t6_messages(data, message);
+	} else if (!data->input_dev) {
+		/*
+		 * Do not report events if input device
+		 * is not yet registered.
+		 */
+		mxt_dump_message(data, message);
+	} else if (report_id >= data->T9_reportid_min &&
+		   report_id <= data->T9_reportid_max) {
+		mxt_proc_t9_message(data, message);
+	} else if (report_id >= data->T15_reportid_min &&
+		   report_id <= data->T15_reportid_max) {
+		mxt_proc_t15_messages(data, message);
+	} else if (report_id >= data->T97_reportid_min &&
+		   report_id <= data->T97_reportid_max) {
+		mxt_proc_t97_messages(data, message);
+	} else if (report_id >= data->T100_reportid_min &&
+		   report_id <= data->T100_reportid_max) {
+		mxt_proc_t100_message(data, message);
+	} else if (report_id == data->T19_reportid) {
+		mxt_input_button(data, message);
+		data->update_input = true;
+	} else {
+		mxt_dump_message(data, message);
+	}
+
+	return 1;
+}
+
+static int mxt_read_and_process_messages(struct mxt_data *data, u8 count)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	int i;
+	u8 num_valid = 0;
+
+	/* Safety check for msg_buf */
+	if (count > data->max_reportid)
+		return -EINVAL;
+
+	/* Process remaining messages if necessary */
+	ret = __mxt_read_reg(data->client, data->T5_address,
+				data->T5_msg_size * count, data->msg_buf);
+	if (ret) {
+		dev_err(dev, "Failed to read %u messages (%d)\n", count, ret);
+		return ret;
+	}
+
+	for (i = 0;  i < count; i++) {
+		ret = mxt_proc_message(data,
+			data->msg_buf + data->T5_msg_size * i);
+
+		if (ret == 1)
+			num_valid++;
+	}
+
+	/* return number of messages read */
+	return num_valid;
+}
+
+static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	u8 count, num_left;
+
+	/* Read T44 and T5 together */
+	ret = __mxt_read_reg(data->client, data->T44_address,
+		data->T5_msg_size + 1, data->msg_buf);
+	if (ret) {
+		dev_err(dev, "Failed to read T44 and T5 (%d)\n", ret);
+		return IRQ_NONE;
+	}
+
+	count = data->msg_buf[0];
+
+	/*
+	 * This condition may be caused by the CHG line being configured in
+	 * Mode 0. It results in unnecessary I2C operations but it is benign.
+	 */
+	if (count == 0)
+		return IRQ_NONE;
+
+	if (count > data->max_reportid) {
+		dev_warn(dev, "T44 count %d exceeded max report id\n", count);
+		count = data->max_reportid;
+	}
+
+	/* Process first message */
+	ret = mxt_proc_message(data, data->msg_buf + 1);
+	if (ret < 0) {
+		dev_warn(dev, "Unexpected invalid message\n");
+		return IRQ_NONE;
+	}
+
+	num_left = count - 1;
+
+	/* Process remaining messages if necessary */
+	if (num_left) {
+		ret = mxt_read_and_process_messages(data, num_left);
+		if (ret < 0)
+			goto end;
+		else if (ret != num_left)
+			dev_warn(dev, "Unexpected invalid message\n");
+	}
+
+end:
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int mxt_process_messages_until_invalid(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int count, read;
+	u8 tries = 2;
+
+	count = data->max_reportid;
+
+	/* Read messages until we force an invalid */
+	do {
+		read = mxt_read_and_process_messages(data, count);
+		if (read < count)
+			return 0;
+	} while (--tries);
+
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
+
+	dev_err(dev, "CHG pin isn't cleared\n");
+	return -EBUSY;
+}
+
+static irqreturn_t mxt_process_messages(struct mxt_data *data)
+{
+	int total_handled, num_handled;
+	u8 count = data->last_message_count;
+
+	if (count < 1 || count > data->max_reportid)
+		count = 1;
+
+	/* include final invalid message */
+	total_handled = mxt_read_and_process_messages(data, count + 1);
+	if (total_handled < 0)
+		return IRQ_NONE;
+	/* if there were invalid messages, then we are done */
+	else if (total_handled <= count)
+		goto update_count;
+
+	/* keep reading two msgs until one is invalid or reportid limit */
+	do {
+		num_handled = mxt_read_and_process_messages(data, 2);
+		if (num_handled < 0)
+			return IRQ_NONE;
+
+		total_handled += num_handled;
+
+		if (num_handled < 2)
+			break;
+	} while (total_handled < data->num_touchids);
+
+update_count:
+	data->last_message_count = total_handled;
+
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mxt_interrupt(int irq, void *dev_id)
+{
+	struct mxt_data *data = dev_id;
+
+	if (data->in_bootloader) {
+		/* bootloader state transition completion */
+		complete(&data->bl_completion);
+		return IRQ_HANDLED;
+	}
+
+	if (!data->object_table)
+		return IRQ_HANDLED;
+
+	if (data->T44_address) {
+		return mxt_process_messages_t44(data);
+	} else {
+		return mxt_process_messages(data);
+	}
+}
+
+static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
+			  u8 value, bool wait)
+{
+	u16 reg;
+	u8 command_register;
+	int timeout_counter = 0;
+	int ret;
+
+	reg = data->T6_address + cmd_offset;
+
+	ret = mxt_write_reg(data->client, reg, value);
+	if (ret)
+		return ret;
+
+	if (!wait)
+		return 0;
+
+	do {
+		msleep(20);
+		ret = __mxt_read_reg(data->client, reg, 1, &command_register);
+		if (ret)
+			return ret;
+	} while (command_register != 0 && timeout_counter++ <= 100);
+
+	if (timeout_counter > 100) {
+		dev_err(&data->client->dev, "Command failed!\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mxt_acquire_irq(struct mxt_data *data)
+{
+	int error;
+
+	enable_irq(data->irq);
+
+	if (data->use_retrigen_workaround) {
+		error = mxt_process_messages_until_invalid(data);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
+static int mxt_soft_reset(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret = 0;
+
+	dev_info(dev, "Resetting device\n");
+
+	disable_irq(data->irq);
+
+	reinit_completion(&data->reset_completion);
+
+	ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_RESET_VALUE, false);
+	if (ret)
+		return ret;
+
+	/* Ignore CHG line for 100ms after reset */
+	msleep(MXT_RESET_INVALID_CHG);
+
+	mxt_acquire_irq(data);
+
+	ret = mxt_wait_for_completion(data, &data->reset_completion,
+				      MXT_RESET_TIMEOUT);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value)
+{
+	/*
+	 * On failure, CRC is set to 0 and config will always be
+	 * downloaded.
+	 */
+	data->config_crc = 0;
+	reinit_completion(&data->crc_completion);
+
+	mxt_t6_command(data, cmd, value, true);
+
+	/*
+	 * Wait for crc message. On failure, CRC is set to 0 and config will
+	 * always be downloaded.
+	 */
+	mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT);
+}
+
+static void mxt_calc_crc24(u32 *crc, u8 firstbyte, u8 secondbyte)
+{
+	static const unsigned int crcpoly = 0x80001B;
+	u32 result;
+	u32 data_word;
+
+	data_word = (secondbyte << 8) | firstbyte;
+	result = ((*crc << 1) ^ data_word);
+
+	if (result & 0x1000000)
+		result ^= crcpoly;
+
+	*crc = result;
+}
+
+static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
+{
+	u32 crc = 0;
+	u8 *ptr = base + start_off;
+	u8 *last_val = base + end_off - 1;
+
+	if (end_off < start_off)
+		return -EINVAL;
+
+	while (ptr < last_val) {
+		mxt_calc_crc24(&crc, *ptr, *(ptr + 1));
+		ptr += 2;
+	}
+
+	/* if len is odd, fill the last byte with 0 */
+	if (ptr == last_val)
+		mxt_calc_crc24(&crc, *ptr, 0);
+
+	/* Mask to 24-bit */
+	crc &= 0x00FFFFFF;
+
+	return crc;
+}
+
+static int mxt_check_retrigen(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	int val;
+	struct irq_data *irqd;
+
+	data->use_retrigen_workaround = false;
+
+	irqd = irq_get_irq_data(data->irq);
+	if (!irqd)
+		return -EINVAL;
+
+	if (irqd_is_level_type(irqd))
+		return 0;
+
+	if (data->T18_address) {
+		error = __mxt_read_reg(client,
+				       data->T18_address + MXT_COMMS_CTRL,
+				       1, &val);
+		if (error)
+			return error;
+
+		if (val & MXT_COMMS_RETRIGEN)
+			return 0;
+	}
+
+	dev_warn(&client->dev, "Enabling RETRIGEN workaround\n");
+	data->use_retrigen_workaround = true;
+	return 0;
+}
+
+static int mxt_prepare_cfg_mem(struct mxt_data *data, struct mxt_cfg *cfg)
+{
+	struct device *dev = &data->client->dev;
+	struct mxt_object *object;
+	unsigned int type, instance, size, byte_offset;
+	int offset;
+	int ret;
+	int i;
+	u16 reg;
+	u8 val;
+
+	while (cfg->raw_pos < cfg->raw_size) {
+		/* Read type, instance, length */
+		ret = sscanf(cfg->raw + cfg->raw_pos, "%x %x %x%n",
+			     &type, &instance, &size, &offset);
+		if (ret == 0) {
+			/* EOF */
+			break;
+		} else if (ret != 3) {
+			dev_err(dev, "Bad format: failed to parse object\n");
+			return -EINVAL;
+		}
+		cfg->raw_pos += offset;
+
+		object = mxt_get_object(data, type);
+		if (!object) {
+			/* Skip object */
+			for (i = 0; i < size; i++) {
+				ret = sscanf(cfg->raw + cfg->raw_pos, "%hhx%n",
+					     &val, &offset);
+				if (ret != 1) {
+					dev_err(dev, "Bad format in T%d at %d\n",
+						type, i);
+					return -EINVAL;
+				}
+				cfg->raw_pos += offset;
+			}
+			continue;
+		}
+
+		if (size > mxt_obj_size(object)) {
+			/*
+			 * Either we are in fallback mode due to wrong
+			 * config or config from a later fw version,
+			 * or the file is corrupt or hand-edited.
+			 */
+			dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
+				 size - mxt_obj_size(object), type);
+		} else if (mxt_obj_size(object) > size) {
+			/*
+			 * If firmware is upgraded, new bytes may be added to
+			 * end of objects. It is generally forward compatible
+			 * to zero these bytes - previous behaviour will be
+			 * retained. However this does invalidate the CRC and
+			 * will force fallback mode until the configuration is
+			 * updated. We warn here but do nothing else - the
+			 * malloc has zeroed the entire configuration.
+			 */
+			dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
+				 mxt_obj_size(object) - size, type);
+		}
+
+		if (instance >= mxt_obj_instances(object)) {
+			dev_err(dev, "Object instances exceeded!\n");
+			return -EINVAL;
+		}
+
+		reg = object->start_address + mxt_obj_size(object) * instance;
+
+		for (i = 0; i < size; i++) {
+			ret = sscanf(cfg->raw + cfg->raw_pos, "%hhx%n",
+				     &val,
+				     &offset);
+			if (ret != 1) {
+				dev_err(dev, "Bad format in T%d at %d\n",
+					type, i);
+				return -EINVAL;
+			}
+			cfg->raw_pos += offset;
+
+			if (i > mxt_obj_size(object))
+				continue;
+
+			byte_offset = reg + i - cfg->start_ofs;
+
+			if (byte_offset >= 0 && byte_offset < cfg->mem_size) {
+				*(cfg->mem + byte_offset) = val;
+			} else {
+				dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
+					reg, object->type, byte_offset);
+				return -EINVAL;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int mxt_upload_cfg_mem(struct mxt_data *data, struct mxt_cfg *cfg)
+{
+	unsigned int byte_offset = 0;
+	int error;
+
+	/* Write configuration as blocks */
+	while (byte_offset < cfg->mem_size) {
+		unsigned int size = cfg->mem_size - byte_offset;
+
+		if (size > MXT_MAX_BLOCK_WRITE)
+			size = MXT_MAX_BLOCK_WRITE;
+
+		error = __mxt_write_reg(data->client,
+					cfg->start_ofs + byte_offset,
+					size, cfg->mem + byte_offset);
+		if (error) {
+			dev_err(&data->client->dev,
+				"Config write error, ret=%d\n", error);
+			return error;
+		}
+
+		byte_offset += size;
+	}
+
+	return 0;
+}
+
+static int mxt_init_t7_power_cfg(struct mxt_data *data);
+
+/*
+ * mxt_update_cfg - download configuration to chip
+ *
+ * Atmel Raw Config File Format
+ *
+ * The first four lines of the raw config file contain:
+ *  1) Version
+ *  2) Chip ID Information (first 7 bytes of device memory)
+ *  3) Chip Information Block 24-bit CRC Checksum
+ *  4) Chip Configuration 24-bit CRC Checksum
+ *
+ * The rest of the file consists of one line per object instance:
+ *   <TYPE> <INSTANCE> <SIZE> <CONTENTS>
+ *
+ *   <TYPE> - 2-byte object type as hex
+ *   <INSTANCE> - 2-byte object instance number as hex
+ *   <SIZE> - 2-byte object size as hex
+ *   <CONTENTS> - array of <SIZE> 1-byte hex values
+ */
+static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
+{
+	struct device *dev = &data->client->dev;
+	struct mxt_cfg cfg;
+	int ret;
+	int offset;
+	int i;
+	u32 info_crc, config_crc, calculated_crc;
+	u16 crc_start = 0;
+
+	/* Make zero terminated copy of the OBP_RAW file */
+	cfg.raw = kmemdup_nul(fw->data, fw->size, GFP_KERNEL);
+	if (!cfg.raw)
+		return -ENOMEM;
+
+	cfg.raw_size = fw->size;
+
+	mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
+
+	if (strncmp(cfg.raw, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
+		dev_err(dev, "Unrecognised config file\n");
+		ret = -EINVAL;
+		goto release_raw;
+	}
+
+	cfg.raw_pos = strlen(MXT_CFG_MAGIC);
+
+	/* Load information block and check */
+	for (i = 0; i < sizeof(struct mxt_info); i++) {
+		ret = sscanf(cfg.raw + cfg.raw_pos, "%hhx%n",
+			     (unsigned char *)&cfg.info + i,
+			     &offset);
+		if (ret != 1) {
+			dev_err(dev, "Bad format\n");
+			ret = -EINVAL;
+			goto release_raw;
+		}
+
+		cfg.raw_pos += offset;
+	}
+
+	if (cfg.info.family_id != data->info->family_id) {
+		dev_err(dev, "Family ID mismatch!\n");
+		ret = -EINVAL;
+		goto release_raw;
+	}
+
+	if (cfg.info.variant_id != data->info->variant_id) {
+		dev_err(dev, "Variant ID mismatch!\n");
+		ret = -EINVAL;
+		goto release_raw;
+	}
+
+	/* Read CRCs */
+	ret = sscanf(cfg.raw + cfg.raw_pos, "%x%n", &info_crc, &offset);
+	if (ret != 1) {
+		dev_err(dev, "Bad format: failed to parse Info CRC\n");
+		ret = -EINVAL;
+		goto release_raw;
+	}
+	cfg.raw_pos += offset;
+
+	ret = sscanf(cfg.raw + cfg.raw_pos, "%x%n", &config_crc, &offset);
+	if (ret != 1) {
+		dev_err(dev, "Bad format: failed to parse Config CRC\n");
+		ret = -EINVAL;
+		goto release_raw;
+	}
+	cfg.raw_pos += offset;
+
+	/*
+	 * The Info Block CRC is calculated over mxt_info and the object
+	 * table. If it does not match then we are trying to load the
+	 * configuration from a different chip or firmware version, so
+	 * the configuration CRC is invalid anyway.
+	 */
+	if (info_crc == data->info_crc) {
+		if (config_crc == 0 || data->config_crc == 0) {
+			dev_info(dev, "CRC zero, attempting to apply config\n");
+		} else if (config_crc == data->config_crc) {
+			dev_dbg(dev, "Config CRC 0x%06X: OK\n",
+				 data->config_crc);
+			ret = 0;
+			goto release_raw;
+		} else {
+			dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
+				 data->config_crc, config_crc);
+		}
+	} else {
+		dev_warn(dev,
+			 "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
+			 data->info_crc, info_crc);
+	}
+
+	/* Malloc memory to store configuration */
+	cfg.start_ofs = MXT_OBJECT_START +
+			data->info->object_num * sizeof(struct mxt_object) +
+			MXT_INFO_CHECKSUM_SIZE;
+	cfg.mem_size = data->mem_size - cfg.start_ofs;
+	cfg.mem = kzalloc(cfg.mem_size, GFP_KERNEL);
+	if (!cfg.mem) {
+		ret = -ENOMEM;
+		goto release_raw;
+	}
+
+	ret = mxt_prepare_cfg_mem(data, &cfg);
+	if (ret)
+		goto release_mem;
+
+	/* Calculate crc of the received configs (not the raw config file) */
+	if (data->T71_address)
+		crc_start = data->T71_address;
+	else if (data->T7_address)
+		crc_start = data->T7_address;
+	else
+		dev_warn(dev, "Could not find CRC start\n");
+
+	if (crc_start > cfg.start_ofs) {
+		calculated_crc = mxt_calculate_crc(cfg.mem,
+						   crc_start - cfg.start_ofs,
+						   cfg.mem_size);
+
+		if (config_crc > 0 && config_crc != calculated_crc)
+			dev_warn(dev, "Config CRC in file inconsistent, calculated=%06X, file=%06X\n",
+				 calculated_crc, config_crc);
+	}
+
+	ret = mxt_upload_cfg_mem(data, &cfg);
+	if (ret)
+		goto release_mem;
+
+	mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
+
+	ret = mxt_check_retrigen(data);
+	if (ret)
+		goto release_mem;
+
+	ret = mxt_soft_reset(data);
+	if (ret)
+		goto release_mem;
+
+	dev_info(dev, "Config successfully updated\n");
+
+	/* T7 config may have changed */
+	mxt_init_t7_power_cfg(data);
+
+release_mem:
+	kfree(cfg.mem);
+release_raw:
+	kfree(cfg.raw);
+	return ret;
+}
+
+static void mxt_free_input_device(struct mxt_data *data)
+{
+	if (data->input_dev) {
+		input_unregister_device(data->input_dev);
+		data->input_dev = NULL;
+	}
+}
+
+static void mxt_free_object_table(struct mxt_data *data)
+{
+#ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT_T37
+	video_unregister_device(&data->dbg.vdev);
+	v4l2_device_unregister(&data->dbg.v4l2);
+#endif
+	data->object_table = NULL;
+	data->info = NULL;
+	kfree(data->raw_info_block);
+	data->raw_info_block = NULL;
+	kfree(data->msg_buf);
+	data->msg_buf = NULL;
+	data->T5_address = 0;
+	data->T5_msg_size = 0;
+	data->T6_reportid = 0;
+	data->T7_address = 0;
+	data->T71_address = 0;
+	data->T9_reportid_min = 0;
+	data->T9_reportid_max = 0;
+	data->T15_reportid_min = 0;
+	data->T15_reportid_max = 0;
+	data->T18_address = 0;
+	data->T19_reportid = 0;
+	data->T44_address = 0;
+	data->T97_reportid_min = 0;
+	data->T97_reportid_max = 0;
+	data->T100_reportid_min = 0;
+	data->T100_reportid_max = 0;
+	data->max_reportid = 0;
+}
+
+static int mxt_parse_object_table(struct mxt_data *data,
+				  struct mxt_object *object_table)
+{
+	struct i2c_client *client = data->client;
+	int i;
+	u8 reportid;
+	u16 end_address;
+
+	/* Valid Report IDs start counting from 1 */
+	reportid = 1;
+	data->mem_size = 0;
+	for (i = 0; i < data->info->object_num; i++) {
+		struct mxt_object *object = object_table + i;
+		u8 min_id, max_id;
+
+		le16_to_cpus(&object->start_address);
+
+		if (object->num_report_ids) {
+			min_id = reportid;
+			reportid += object->num_report_ids *
+					mxt_obj_instances(object);
+			max_id = reportid - 1;
+		} else {
+			min_id = 0;
+			max_id = 0;
+		}
+
+		dev_dbg(&data->client->dev,
+			"T%u Start:%u Size:%zu Instances:%zu Report IDs:%u-%u\n",
+			object->type, object->start_address,
+			mxt_obj_size(object), mxt_obj_instances(object),
+			min_id, max_id);
+
+		switch (object->type) {
+		case MXT_GEN_MESSAGE_T5:
+			if (data->info->family_id == 0x80 &&
+			    data->info->version < 0x20) {
+				/*
+				 * On mXT224 firmware versions prior to V2.0
+				 * read and discard unused CRC byte otherwise
+				 * DMA reads are misaligned.
+				 */
+				data->T5_msg_size = mxt_obj_size(object);
+			} else {
+				/* CRC not enabled, so skip last byte */
+				data->T5_msg_size = mxt_obj_size(object) - 1;
+			}
+			data->T5_address = object->start_address;
+			break;
+		case MXT_GEN_COMMAND_T6:
+			data->T6_reportid = min_id;
+			data->T6_address = object->start_address;
+			break;
+		case MXT_GEN_POWER_T7:
+			data->T7_address = object->start_address;
+			break;
+		case MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71:
+			data->T71_address = object->start_address;
+			break;
+		case MXT_TOUCH_MULTI_T9:
+			data->multitouch = MXT_TOUCH_MULTI_T9;
+			/* Only handle messages from first T9 instance */
+			data->T9_reportid_min = min_id;
+			data->T9_reportid_max = min_id +
+						object->num_report_ids - 1;
+			data->num_touchids = object->num_report_ids;
+			break;
+		case MXT_TOUCH_KEYARRAY_T15:
+			data->T15_reportid_min = min_id;
+			data->T15_reportid_max = max_id;
+			break;
+		case MXT_SPT_COMMSCONFIG_T18:
+			data->T18_address = object->start_address;
+			break;
+		case MXT_SPT_MESSAGECOUNT_T44:
+			data->T44_address = object->start_address;
+			break;
+		case MXT_SPT_GPIOPWM_T19:
+			data->T19_reportid = min_id;
+			break;
+		case MXT_TOUCH_PTC_KEYS_T97:
+			data->T97_reportid_min = min_id;
+			data->T97_reportid_max = max_id;
+			break;
+		case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+			data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
+			data->T100_reportid_min = min_id;
+			data->T100_reportid_max = max_id;
+			/* first two report IDs reserved */
+			data->num_touchids = object->num_report_ids - 2;
+			break;
+		}
+
+		end_address = object->start_address
+			+ mxt_obj_size(object) * mxt_obj_instances(object) - 1;
+
+		if (end_address >= data->mem_size)
+			data->mem_size = end_address + 1;
+	}
+
+	/* Store maximum reportid */
+	data->max_reportid = reportid;
+
+	/* If T44 exists, T5 position has to be directly after */
+	if (data->T44_address && (data->T5_address != data->T44_address + 1)) {
+		dev_err(&client->dev, "Invalid T44 position\n");
+		return -EINVAL;
+	}
+
+	data->msg_buf = kcalloc(data->max_reportid,
+				data->T5_msg_size, GFP_KERNEL);
+	if (!data->msg_buf)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int mxt_read_info_block(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	size_t size;
+	void *id_buf, *buf;
+	uint8_t num_objects;
+	u32 calculated_crc;
+	u8 *crc_ptr;
+
+	/* If info block already allocated, free it */
+	if (data->raw_info_block)
+		mxt_free_object_table(data);
+
+	/* Read 7-byte ID information block starting at address 0 */
+	size = sizeof(struct mxt_info);
+	id_buf = kzalloc(size, GFP_KERNEL);
+	if (!id_buf)
+		return -ENOMEM;
+
+	error = __mxt_read_reg(client, 0, size, id_buf);
+	if (error)
+		goto err_free_mem;
+
+	/* Resize buffer to give space for rest of info block */
+	num_objects = ((struct mxt_info *)id_buf)->object_num;
+	size += (num_objects * sizeof(struct mxt_object))
+		+ MXT_INFO_CHECKSUM_SIZE;
+
+	buf = krealloc(id_buf, size, GFP_KERNEL);
+	if (!buf) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+	id_buf = buf;
+
+	/* Read rest of info block */
+	error = __mxt_read_reg(client, MXT_OBJECT_START,
+			       size - MXT_OBJECT_START,
+			       id_buf + MXT_OBJECT_START);
+	if (error)
+		goto err_free_mem;
+
+	/* Extract & calculate checksum */
+	crc_ptr = id_buf + size - MXT_INFO_CHECKSUM_SIZE;
+	data->info_crc = crc_ptr[0] | (crc_ptr[1] << 8) | (crc_ptr[2] << 16);
+
+	calculated_crc = mxt_calculate_crc(id_buf, 0,
+					   size - MXT_INFO_CHECKSUM_SIZE);
+
+	/*
+	 * CRC mismatch can be caused by data corruption due to I2C comms
+	 * issue or else device is not using Object Based Protocol (eg i2c-hid)
+	 */
+	if ((data->info_crc == 0) || (data->info_crc != calculated_crc)) {
+		dev_err(&client->dev,
+			"Info Block CRC error calculated=0x%06X read=0x%06X\n",
+			calculated_crc, data->info_crc);
+		error = -EIO;
+		goto err_free_mem;
+	}
+
+	data->raw_info_block = id_buf;
+	data->info = (struct mxt_info *)id_buf;
+
+	dev_info(&client->dev,
+		 "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
+		 data->info->family_id, data->info->variant_id,
+		 data->info->version >> 4, data->info->version & 0xf,
+		 data->info->build, data->info->object_num);
+
+	/* Parse object table information */
+	error = mxt_parse_object_table(data, id_buf + MXT_OBJECT_START);
+	if (error) {
+		dev_err(&client->dev, "Error %d parsing object table\n", error);
+		mxt_free_object_table(data);
+		return error;
+	}
+
+	data->object_table = (struct mxt_object *)(id_buf + MXT_OBJECT_START);
+
+	return 0;
+
+err_free_mem:
+	kfree(id_buf);
+	return error;
+}
+
+static int mxt_read_t9_resolution(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	struct t9_range range;
+	unsigned char orient;
+	struct mxt_object *object;
+
+	object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
+	if (!object)
+		return -EINVAL;
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T9_XSIZE,
+			       sizeof(data->xsize), &data->xsize);
+	if (error)
+		return error;
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T9_YSIZE,
+			       sizeof(data->ysize), &data->ysize);
+	if (error)
+		return error;
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T9_RANGE,
+			       sizeof(range), &range);
+	if (error)
+		return error;
+
+	data->max_x = get_unaligned_le16(&range.x);
+	data->max_y = get_unaligned_le16(&range.y);
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T9_ORIENT,
+				1, &orient);
+	if (error)
+		return error;
+
+	data->xy_switch = orient & MXT_T9_ORIENT_SWITCH;
+	data->invertx = orient & MXT_T9_ORIENT_INVERTX;
+	data->inverty = orient & MXT_T9_ORIENT_INVERTY;
+
+	return 0;
+}
+
+static int mxt_read_t100_config(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	struct mxt_object *object;
+	u16 range_x, range_y;
+	u8 cfg, tchaux;
+	u8 aux;
+
+	object = mxt_get_object(data, MXT_TOUCH_MULTITOUCHSCREEN_T100);
+	if (!object)
+		return -EINVAL;
+
+	/* read touchscreen dimensions */
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_XRANGE,
+			       sizeof(range_x), &range_x);
+	if (error)
+		return error;
+
+	data->max_x = get_unaligned_le16(&range_x);
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_YRANGE,
+			       sizeof(range_y), &range_y);
+	if (error)
+		return error;
+
+	data->max_y = get_unaligned_le16(&range_y);
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_XSIZE,
+			       sizeof(data->xsize), &data->xsize);
+	if (error)
+		return error;
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_YSIZE,
+			       sizeof(data->ysize), &data->ysize);
+	if (error)
+		return error;
+
+	/* read orientation config */
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T100_CFG1,
+				1, &cfg);
+	if (error)
+		return error;
+
+	data->xy_switch = cfg & MXT_T100_CFG_SWITCHXY;
+	data->invertx = cfg & MXT_T100_CFG_INVERTX;
+	data->inverty = cfg & MXT_T100_CFG_INVERTY;
+
+	/* allocate aux bytes */
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T100_TCHAUX,
+				1, &tchaux);
+	if (error)
+		return error;
+
+	aux = 6;
+
+	if (tchaux & MXT_T100_TCHAUX_VECT)
+		data->t100_aux_vect = aux++;
+
+	if (tchaux & MXT_T100_TCHAUX_AMPL)
+		data->t100_aux_ampl = aux++;
+
+	if (tchaux & MXT_T100_TCHAUX_AREA)
+		data->t100_aux_area = aux++;
+
+	dev_dbg(&client->dev,
+		"T100 aux mappings vect:%u ampl:%u area:%u\n",
+		data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area);
+
+	return 0;
+}
+
+static int mxt_input_open(struct input_dev *dev);
+static void mxt_input_close(struct input_dev *dev);
+
+static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
+				   struct mxt_data *data)
+{
+	int i;
+
+	input_dev->name = "Atmel maXTouch Touchpad";
+
+	__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+
+	input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+			  MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+			  MXT_PIXELS_PER_MM);
+
+	for (i = 0; i < data->t19_num_keys; i++)
+		if (data->t19_keymap[i] != KEY_RESERVED)
+			input_set_capability(input_dev, EV_KEY,
+					     data->t19_keymap[i]);
+}
+
+static int mxt_initialize_input_device(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	struct input_dev *input_dev;
+	int error;
+	unsigned int num_mt_slots;
+	unsigned int mt_flags = 0;
+	int i;
+
+	switch (data->multitouch) {
+	case MXT_TOUCH_MULTI_T9:
+		num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+		error = mxt_read_t9_resolution(data);
+		if (error)
+			dev_warn(dev, "Failed to initialize T9 resolution\n");
+		break;
+
+	case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+		num_mt_slots = data->num_touchids;
+		error = mxt_read_t100_config(data);
+		if (error)
+			dev_warn(dev, "Failed to read T100 config\n");
+		break;
+
+	default:
+		dev_err(dev, "Invalid multitouch object\n");
+		return -EINVAL;
+	}
+
+	/* Handle default values and orientation switch */
+	if (data->max_x == 0)
+		data->max_x = 1023;
+
+	if (data->max_y == 0)
+		data->max_y = 1023;
+
+	if (data->xy_switch)
+		swap(data->max_x, data->max_y);
+
+	dev_info(dev, "Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+
+	/* Register input device */
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		return -ENOMEM;
+
+	input_dev->name = "Atmel maXTouch Touchscreen";
+	input_dev->phys = data->phys;
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = dev;
+	input_dev->open = mxt_input_open;
+	input_dev->close = mxt_input_close;
+
+	input_dev->keycode = data->t15_keymap;
+	input_dev->keycodemax = data->t15_num_keys;
+	input_dev->keycodesize = sizeof(data->t15_keymap[0]);
+
+	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+
+	/* For single touch */
+	input_set_abs_params(input_dev, ABS_X, 0, data->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, data->max_y, 0, 0);
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_ampl)) {
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
+	}
+
+	/* If device has buttons we assume it is a touchpad */
+	if (data->t19_num_keys) {
+		mxt_set_up_as_touchpad(input_dev, data);
+		mt_flags |= INPUT_MT_POINTER;
+	} else {
+		mt_flags |= INPUT_MT_DIRECT;
+	}
+
+	/* For multi touch */
+	error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
+	if (error) {
+		dev_err(dev, "Error %d initialising slots\n", error);
+		goto err_free_mem;
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100) {
+		input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
+				     0, MT_TOOL_MAX, 0, 0);
+		input_set_abs_params(input_dev, ABS_MT_DISTANCE,
+				     MXT_DISTANCE_ACTIVE_TOUCH,
+				     MXT_DISTANCE_HOVERING,
+				     0, 0);
+	}
+
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, data->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, data->max_y, 0, 0);
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_area)) {
+		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+				     0, MXT_MAX_AREA, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_ampl)) {
+		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_vect) {
+		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_vect) {
+		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+				     0, 255, 0, 0);
+	}
+
+	/* For T15 and T97 Key Array */
+	if (data->T15_reportid_min || data->T97_reportid_min) {
+		for (i = 0; i < data->t15_num_keys; i++)
+			input_set_capability(input_dev,
+					     EV_KEY, data->t15_keymap[i]);
+	}
+
+	input_set_drvdata(input_dev, data);
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(dev, "Error %d registering input device\n", error);
+		goto err_free_mem;
+	}
+
+	data->input_dev = input_dev;
+
+	return 0;
+
+err_free_mem:
+	input_free_device(input_dev);
+	return error;
+}
+
+static int mxt_configure_objects(struct mxt_data *data,
+				 const struct firmware *cfg);
+
+static void mxt_config_cb(const struct firmware *cfg, void *ctx)
+{
+	mxt_configure_objects(ctx, cfg);
+	release_firmware(cfg);
+}
+
+static int mxt_initialize(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int recovery_attempts = 0;
+	int error;
+
+	while (1) {
+		error = mxt_read_info_block(data);
+		if (!error)
+			break;
+
+		/* Check bootloader state */
+		error = mxt_probe_bootloader(data, false);
+		if (error) {
+			dev_info(&client->dev, "Trying alternate bootloader address\n");
+			error = mxt_probe_bootloader(data, true);
+			if (error) {
+				/* Chip is not in appmode or bootloader mode */
+				return error;
+			}
+		}
+
+		/* OK, we are in bootloader, see if we can recover */
+		if (++recovery_attempts > 1) {
+			dev_err(&client->dev, "Could not recover from bootloader mode\n");
+			/*
+			 * We can reflash from this state, so do not
+			 * abort initialization.
+			 */
+			data->in_bootloader = true;
+			return 0;
+		}
+
+		/* Attempt to exit bootloader into app mode */
+		mxt_send_bootloader_cmd(data, false);
+		msleep(MXT_FW_RESET_TIME);
+	}
+
+	error = mxt_check_retrigen(data);
+	if (error)
+		return error;
+
+	error = mxt_acquire_irq(data);
+	if (error)
+		return error;
+
+	error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
+					&client->dev, GFP_KERNEL, data,
+					mxt_config_cb);
+	if (error) {
+		dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep)
+{
+	struct device *dev = &data->client->dev;
+	int error;
+	struct t7_config *new_config;
+	struct t7_config deepsleep = { .active = 0, .idle = 0 };
+
+	if (sleep == MXT_POWER_CFG_DEEPSLEEP)
+		new_config = &deepsleep;
+	else
+		new_config = &data->t7_cfg;
+
+	error = __mxt_write_reg(data->client, data->T7_address,
+				sizeof(data->t7_cfg), new_config);
+	if (error)
+		return error;
+
+	dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n",
+		new_config->active, new_config->idle);
+
+	return 0;
+}
+
+static int mxt_init_t7_power_cfg(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int error;
+	bool retry = false;
+
+recheck:
+	error = __mxt_read_reg(data->client, data->T7_address,
+				sizeof(data->t7_cfg), &data->t7_cfg);
+	if (error)
+		return error;
+
+	if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) {
+		if (!retry) {
+			dev_dbg(dev, "T7 cfg zero, resetting\n");
+			mxt_soft_reset(data);
+			retry = true;
+			goto recheck;
+		} else {
+			dev_dbg(dev, "T7 cfg zero after reset, overriding\n");
+			data->t7_cfg.active = 20;
+			data->t7_cfg.idle = 100;
+			return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+		}
+	}
+
+	dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n",
+		data->t7_cfg.active, data->t7_cfg.idle);
+	return 0;
+}
+
+#ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT_T37
+static const struct v4l2_file_operations mxt_video_fops = {
+	.owner = THIS_MODULE,
+	.open = v4l2_fh_open,
+	.release = vb2_fop_release,
+	.unlocked_ioctl = video_ioctl2,
+	.read = vb2_fop_read,
+	.mmap = vb2_fop_mmap,
+	.poll = vb2_fop_poll,
+};
+
+static u16 mxt_get_debug_value(struct mxt_data *data, unsigned int x,
+			       unsigned int y)
+{
+	struct mxt_info *info = data->info;
+	struct mxt_dbg *dbg = &data->dbg;
+	unsigned int ofs, page;
+	unsigned int col = 0;
+	unsigned int col_width;
+
+	if (info->family_id == MXT_FAMILY_1386) {
+		col_width = info->matrix_ysize / MXT1386_COLUMNS;
+		col = y / col_width;
+		y = y % col_width;
+	} else {
+		col_width = info->matrix_ysize;
+	}
+
+	ofs = (y + (x * col_width)) * sizeof(u16);
+	page = ofs / MXT_DIAGNOSTIC_SIZE;
+	ofs %= MXT_DIAGNOSTIC_SIZE;
+
+	if (info->family_id == MXT_FAMILY_1386)
+		page += col * MXT1386_PAGES_PER_COLUMN;
+
+	return get_unaligned_le16(&dbg->t37_buf[page].data[ofs]);
+}
+
+static int mxt_convert_debug_pages(struct mxt_data *data, u16 *outbuf)
+{
+	struct mxt_dbg *dbg = &data->dbg;
+	unsigned int x = 0;
+	unsigned int y = 0;
+	unsigned int i, rx, ry;
+
+	for (i = 0; i < dbg->t37_nodes; i++) {
+		/* Handle orientation */
+		rx = data->xy_switch ? y : x;
+		ry = data->xy_switch ? x : y;
+		rx = data->invertx ? (data->xsize - 1 - rx) : rx;
+		ry = data->inverty ? (data->ysize - 1 - ry) : ry;
+
+		outbuf[i] = mxt_get_debug_value(data, rx, ry);
+
+		/* Next value */
+		if (++x >= (data->xy_switch ? data->ysize : data->xsize)) {
+			x = 0;
+			y++;
+		}
+	}
+
+	return 0;
+}
+
+static int mxt_read_diagnostic_debug(struct mxt_data *data, u8 mode,
+				     u16 *outbuf)
+{
+	struct mxt_dbg *dbg = &data->dbg;
+	int retries = 0;
+	int page;
+	int ret;
+	u8 cmd = mode;
+	struct t37_debug *p;
+	u8 cmd_poll;
+
+	for (page = 0; page < dbg->t37_pages; page++) {
+		p = dbg->t37_buf + page;
+
+		ret = mxt_write_reg(data->client, dbg->diag_cmd_address,
+				    cmd);
+		if (ret)
+			return ret;
+
+		retries = 0;
+		msleep(20);
+wait_cmd:
+		/* Read back command byte */
+		ret = __mxt_read_reg(data->client, dbg->diag_cmd_address,
+				     sizeof(cmd_poll), &cmd_poll);
+		if (ret)
+			return ret;
+
+		/* Field is cleared once the command has been processed */
+		if (cmd_poll) {
+			if (retries++ > 100)
+				return -EINVAL;
+
+			msleep(20);
+			goto wait_cmd;
+		}
+
+		/* Read T37 page */
+		ret = __mxt_read_reg(data->client, dbg->t37_address,
+				     sizeof(struct t37_debug), p);
+		if (ret)
+			return ret;
+
+		if (p->mode != mode || p->page != page) {
+			dev_err(&data->client->dev, "T37 page mismatch\n");
+			return -EINVAL;
+		}
+
+		dev_dbg(&data->client->dev, "%s page:%d retries:%d\n",
+			__func__, page, retries);
+
+		/* For remaining pages, write PAGEUP rather than mode */
+		cmd = MXT_DIAGNOSTIC_PAGEUP;
+	}
+
+	return mxt_convert_debug_pages(data, outbuf);
+}
+
+static int mxt_queue_setup(struct vb2_queue *q,
+		       unsigned int *nbuffers, unsigned int *nplanes,
+		       unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct mxt_data *data = q->drv_priv;
+	size_t size = data->dbg.t37_nodes * sizeof(u16);
+
+	if (*nplanes)
+		return sizes[0] < size ? -EINVAL : 0;
+
+	*nplanes = 1;
+	sizes[0] = size;
+
+	return 0;
+}
+
+static void mxt_buffer_queue(struct vb2_buffer *vb)
+{
+	struct mxt_data *data = vb2_get_drv_priv(vb->vb2_queue);
+	u16 *ptr;
+	int ret;
+	u8 mode;
+
+	ptr = vb2_plane_vaddr(vb, 0);
+	if (!ptr) {
+		dev_err(&data->client->dev, "Error acquiring frame ptr\n");
+		goto fault;
+	}
+
+	switch (data->dbg.input) {
+	case MXT_V4L_INPUT_DELTAS:
+	default:
+		mode = MXT_DIAGNOSTIC_DELTAS;
+		break;
+
+	case MXT_V4L_INPUT_REFS:
+		mode = MXT_DIAGNOSTIC_REFS;
+		break;
+	}
+
+	ret = mxt_read_diagnostic_debug(data, mode, ptr);
+	if (ret)
+		goto fault;
+
+	vb2_set_plane_payload(vb, 0, data->dbg.t37_nodes * sizeof(u16));
+	vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
+	return;
+
+fault:
+	vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+}
+
+/* V4L2 structures */
+static const struct vb2_ops mxt_queue_ops = {
+	.queue_setup		= mxt_queue_setup,
+	.buf_queue		= mxt_buffer_queue,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+static const struct vb2_queue mxt_queue = {
+	.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+	.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ,
+	.buf_struct_size = sizeof(struct mxt_vb2_buffer),
+	.ops = &mxt_queue_ops,
+	.mem_ops = &vb2_vmalloc_memops,
+	.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC,
+	.min_buffers_needed = 1,
+};
+
+static int mxt_vidioc_querycap(struct file *file, void *priv,
+				 struct v4l2_capability *cap)
+{
+	struct mxt_data *data = video_drvdata(file);
+
+	strscpy(cap->driver, "atmel_mxt_ts", sizeof(cap->driver));
+	strscpy(cap->card, "atmel_mxt_ts touch", sizeof(cap->card));
+	snprintf(cap->bus_info, sizeof(cap->bus_info),
+		 "I2C:%s", dev_name(&data->client->dev));
+	return 0;
+}
+
+static int mxt_vidioc_enum_input(struct file *file, void *priv,
+				   struct v4l2_input *i)
+{
+	if (i->index >= MXT_V4L_INPUT_MAX)
+		return -EINVAL;
+
+	i->type = V4L2_INPUT_TYPE_TOUCH;
+
+	switch (i->index) {
+	case MXT_V4L_INPUT_REFS:
+		strscpy(i->name, "Mutual Capacitance References",
+			sizeof(i->name));
+		break;
+	case MXT_V4L_INPUT_DELTAS:
+		strscpy(i->name, "Mutual Capacitance Deltas", sizeof(i->name));
+		break;
+	}
+
+	return 0;
+}
+
+static int mxt_set_input(struct mxt_data *data, unsigned int i)
+{
+	struct v4l2_pix_format *f = &data->dbg.format;
+
+	if (i >= MXT_V4L_INPUT_MAX)
+		return -EINVAL;
+
+	if (i == MXT_V4L_INPUT_DELTAS)
+		f->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
+	else
+		f->pixelformat = V4L2_TCH_FMT_TU16;
+
+	f->width = data->xy_switch ? data->ysize : data->xsize;
+	f->height = data->xy_switch ? data->xsize : data->ysize;
+	f->field = V4L2_FIELD_NONE;
+	f->colorspace = V4L2_COLORSPACE_RAW;
+	f->bytesperline = f->width * sizeof(u16);
+	f->sizeimage = f->width * f->height * sizeof(u16);
+
+	data->dbg.input = i;
+
+	return 0;
+}
+
+static int mxt_vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	return mxt_set_input(video_drvdata(file), i);
+}
+
+static int mxt_vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	struct mxt_data *data = video_drvdata(file);
+
+	*i = data->dbg.input;
+
+	return 0;
+}
+
+static int mxt_vidioc_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct mxt_data *data = video_drvdata(file);
+
+	f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	f->fmt.pix = data->dbg.format;
+
+	return 0;
+}
+
+static int mxt_vidioc_enum_fmt(struct file *file, void *priv,
+				 struct v4l2_fmtdesc *fmt)
+{
+	if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	switch (fmt->index) {
+	case 0:
+		fmt->pixelformat = V4L2_TCH_FMT_TU16;
+		break;
+
+	case 1:
+		fmt->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mxt_vidioc_g_parm(struct file *file, void *fh,
+			     struct v4l2_streamparm *a)
+{
+	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	a->parm.capture.readbuffers = 1;
+	a->parm.capture.timeperframe.numerator = 1;
+	a->parm.capture.timeperframe.denominator = 10;
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops mxt_video_ioctl_ops = {
+	.vidioc_querycap        = mxt_vidioc_querycap,
+
+	.vidioc_enum_fmt_vid_cap = mxt_vidioc_enum_fmt,
+	.vidioc_s_fmt_vid_cap   = mxt_vidioc_fmt,
+	.vidioc_g_fmt_vid_cap   = mxt_vidioc_fmt,
+	.vidioc_try_fmt_vid_cap	= mxt_vidioc_fmt,
+	.vidioc_g_parm		= mxt_vidioc_g_parm,
+
+	.vidioc_enum_input      = mxt_vidioc_enum_input,
+	.vidioc_g_input         = mxt_vidioc_g_input,
+	.vidioc_s_input         = mxt_vidioc_s_input,
+
+	.vidioc_reqbufs         = vb2_ioctl_reqbufs,
+	.vidioc_create_bufs     = vb2_ioctl_create_bufs,
+	.vidioc_querybuf        = vb2_ioctl_querybuf,
+	.vidioc_qbuf            = vb2_ioctl_qbuf,
+	.vidioc_dqbuf           = vb2_ioctl_dqbuf,
+	.vidioc_expbuf          = vb2_ioctl_expbuf,
+
+	.vidioc_streamon        = vb2_ioctl_streamon,
+	.vidioc_streamoff       = vb2_ioctl_streamoff,
+};
+
+static const struct video_device mxt_video_device = {
+	.name = "Atmel maxTouch",
+	.fops = &mxt_video_fops,
+	.ioctl_ops = &mxt_video_ioctl_ops,
+	.release = video_device_release_empty,
+	.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TOUCH |
+		       V4L2_CAP_READWRITE | V4L2_CAP_STREAMING,
+};
+
+static void mxt_debug_init(struct mxt_data *data)
+{
+	struct mxt_info *info = data->info;
+	struct mxt_dbg *dbg = &data->dbg;
+	struct mxt_object *object;
+	int error;
+
+	object = mxt_get_object(data, MXT_GEN_COMMAND_T6);
+	if (!object)
+		goto error;
+
+	dbg->diag_cmd_address = object->start_address + MXT_COMMAND_DIAGNOSTIC;
+
+	object = mxt_get_object(data, MXT_DEBUG_DIAGNOSTIC_T37);
+	if (!object)
+		goto error;
+
+	if (mxt_obj_size(object) != sizeof(struct t37_debug)) {
+		dev_warn(&data->client->dev, "Bad T37 size");
+		goto error;
+	}
+
+	dbg->t37_address = object->start_address;
+
+	/* Calculate size of data and allocate buffer */
+	dbg->t37_nodes = data->xsize * data->ysize;
+
+	if (info->family_id == MXT_FAMILY_1386)
+		dbg->t37_pages = MXT1386_COLUMNS * MXT1386_PAGES_PER_COLUMN;
+	else
+		dbg->t37_pages = DIV_ROUND_UP(data->xsize *
+					      info->matrix_ysize *
+					      sizeof(u16),
+					      sizeof(dbg->t37_buf->data));
+
+	dbg->t37_buf = devm_kmalloc_array(&data->client->dev, dbg->t37_pages,
+					  sizeof(struct t37_debug), GFP_KERNEL);
+	if (!dbg->t37_buf)
+		goto error;
+
+	/* init channel to zero */
+	mxt_set_input(data, 0);
+
+	/* register video device */
+	snprintf(dbg->v4l2.name, sizeof(dbg->v4l2.name), "%s", "atmel_mxt_ts");
+	error = v4l2_device_register(&data->client->dev, &dbg->v4l2);
+	if (error)
+		goto error;
+
+	/* initialize the queue */
+	mutex_init(&dbg->lock);
+	dbg->queue = mxt_queue;
+	dbg->queue.drv_priv = data;
+	dbg->queue.lock = &dbg->lock;
+	dbg->queue.dev = &data->client->dev;
+
+	error = vb2_queue_init(&dbg->queue);
+	if (error)
+		goto error_unreg_v4l2;
+
+	dbg->vdev = mxt_video_device;
+	dbg->vdev.v4l2_dev = &dbg->v4l2;
+	dbg->vdev.lock = &dbg->lock;
+	dbg->vdev.vfl_dir = VFL_DIR_RX;
+	dbg->vdev.queue = &dbg->queue;
+	video_set_drvdata(&dbg->vdev, data);
+
+	error = video_register_device(&dbg->vdev, VFL_TYPE_TOUCH, -1);
+	if (error)
+		goto error_unreg_v4l2;
+
+	return;
+
+error_unreg_v4l2:
+	v4l2_device_unregister(&dbg->v4l2);
+error:
+	dev_warn(&data->client->dev, "Error initializing T37\n");
+}
+#else
+static void mxt_debug_init(struct mxt_data *data)
+{
+}
+#endif
+
+static int mxt_configure_objects(struct mxt_data *data,
+				 const struct firmware *cfg)
+{
+	struct device *dev = &data->client->dev;
+	int error;
+
+	error = mxt_init_t7_power_cfg(data);
+	if (error) {
+		dev_err(dev, "Failed to initialize power cfg\n");
+		return error;
+	}
+
+	if (cfg) {
+		error = mxt_update_cfg(data, cfg);
+		if (error)
+			dev_warn(dev, "Error %d updating config\n", error);
+	}
+
+	if (data->multitouch) {
+		error = mxt_initialize_input_device(data);
+		if (error)
+			return error;
+	} else {
+		dev_warn(dev, "No touch object detected\n");
+	}
+
+	mxt_debug_init(data);
+
+	return 0;
+}
+
+/* Firmware Version is returned as Major.Minor.Build */
+static ssize_t mxt_fw_version_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_info *info = data->info;
+	return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
+			 info->version >> 4, info->version & 0xf, info->build);
+}
+
+/* Hardware Version is returned as FamilyID.VariantID */
+static ssize_t mxt_hw_version_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_info *info = data->info;
+	return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
+			 info->family_id, info->variant_id);
+}
+
+static ssize_t mxt_show_instance(char *buf, int count,
+				 struct mxt_object *object, int instance,
+				 const u8 *val)
+{
+	int i;
+
+	if (mxt_obj_instances(object) > 1)
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				   "Instance %u\n", instance);
+
+	for (i = 0; i < mxt_obj_size(object); i++)
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				"\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
+	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
+
+	return count;
+}
+
+static ssize_t mxt_object_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_object *object;
+	int count = 0;
+	int i, j;
+	int error;
+	u8 *obuf;
+
+	/* Pre-allocate buffer large enough to hold max sized object. */
+	obuf = kmalloc(256, GFP_KERNEL);
+	if (!obuf)
+		return -ENOMEM;
+
+	error = 0;
+	for (i = 0; i < data->info->object_num; i++) {
+		object = data->object_table + i;
+
+		if (!mxt_object_readable(object->type))
+			continue;
+
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				"T%u:\n", object->type);
+
+		for (j = 0; j < mxt_obj_instances(object); j++) {
+			u16 size = mxt_obj_size(object);
+			u16 addr = object->start_address + j * size;
+
+			error = __mxt_read_reg(data->client, addr, size, obuf);
+			if (error)
+				goto done;
+
+			count = mxt_show_instance(buf, count, object, j, obuf);
+		}
+	}
+
+done:
+	kfree(obuf);
+	return error ?: count;
+}
+
+static int mxt_check_firmware_format(struct device *dev,
+				     const struct firmware *fw)
+{
+	unsigned int pos = 0;
+	char c;
+
+	while (pos < fw->size) {
+		c = *(fw->data + pos);
+
+		if (c < '0' || (c > '9' && c < 'A') || c > 'F')
+			return 0;
+
+		pos++;
+	}
+
+	/*
+	 * To convert file try:
+	 * xxd -r -p mXTXXX__APP_VX-X-XX.enc > maxtouch.fw
+	 */
+	dev_err(dev, "Aborting: firmware file must be in binary format\n");
+
+	return -EINVAL;
+}
+
+static int mxt_load_fw(struct device *dev, const char *fn)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	const struct firmware *fw = NULL;
+	unsigned int frame_size;
+	unsigned int pos = 0;
+	unsigned int retry = 0;
+	unsigned int frame = 0;
+	int ret;
+
+	ret = request_firmware(&fw, fn, dev);
+	if (ret) {
+		dev_err(dev, "Unable to open firmware %s\n", fn);
+		return ret;
+	}
+
+	/* Check for incorrect enc file */
+	ret = mxt_check_firmware_format(dev, fw);
+	if (ret)
+		goto release_firmware;
+
+	if (!data->in_bootloader) {
+		/* Change to the bootloader mode */
+		data->in_bootloader = true;
+
+		ret = mxt_t6_command(data, MXT_COMMAND_RESET,
+				     MXT_BOOT_VALUE, false);
+		if (ret)
+			goto release_firmware;
+
+		msleep(MXT_RESET_TIME);
+
+		/* Do not need to scan since we know family ID */
+		ret = mxt_lookup_bootloader_address(data, 0);
+		if (ret)
+			goto release_firmware;
+
+		mxt_free_input_device(data);
+		mxt_free_object_table(data);
+	} else {
+		enable_irq(data->irq);
+	}
+
+	reinit_completion(&data->bl_completion);
+
+	ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
+	if (ret) {
+		/* Bootloader may still be unlocked from previous attempt */
+		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false);
+		if (ret)
+			goto disable_irq;
+	} else {
+		dev_info(dev, "Unlocking bootloader\n");
+
+		/* Unlock bootloader */
+		ret = mxt_send_bootloader_cmd(data, true);
+		if (ret)
+			goto disable_irq;
+	}
+
+	while (pos < fw->size) {
+		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
+		if (ret)
+			goto disable_irq;
+
+		frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
+
+		/* Take account of CRC bytes */
+		frame_size += 2;
+
+		/* Write one frame to device */
+		ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
+		if (ret)
+			goto disable_irq;
+
+		ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
+		if (ret) {
+			retry++;
+
+			/* Back off by 20ms per retry */
+			msleep(retry * 20);
+
+			if (retry > 20) {
+				dev_err(dev, "Retry count exceeded\n");
+				goto disable_irq;
+			}
+		} else {
+			retry = 0;
+			pos += frame_size;
+			frame++;
+		}
+
+		if (frame % 50 == 0)
+			dev_dbg(dev, "Sent %d frames, %d/%zd bytes\n",
+				frame, pos, fw->size);
+	}
+
+	/* Wait for flash. */
+	ret = mxt_wait_for_completion(data, &data->bl_completion,
+				      MXT_FW_RESET_TIME);
+	if (ret)
+		goto disable_irq;
+
+	dev_dbg(dev, "Sent %d frames, %d bytes\n", frame, pos);
+
+	/*
+	 * Wait for device to reset. Some bootloader versions do not assert
+	 * the CHG line after bootloading has finished, so ignore potential
+	 * errors.
+	 */
+	mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
+
+	data->in_bootloader = false;
+
+disable_irq:
+	disable_irq(data->irq);
+release_firmware:
+	release_firmware(fw);
+	return ret;
+}
+
+static ssize_t mxt_update_fw_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	int error;
+
+	error = mxt_load_fw(dev, MXT_FW_NAME);
+	if (error) {
+		dev_err(dev, "The firmware update failed(%d)\n", error);
+		count = error;
+	} else {
+		dev_info(dev, "The firmware update succeeded\n");
+
+		error = mxt_initialize(data);
+		if (error)
+			return error;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
+static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
+static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
+
+static struct attribute *mxt_attrs[] = {
+	&dev_attr_fw_version.attr,
+	&dev_attr_hw_version.attr,
+	&dev_attr_object.attr,
+	&dev_attr_update_fw.attr,
+	NULL
+};
+
+static const struct attribute_group mxt_attr_group = {
+	.attrs = mxt_attrs,
+};
+
+static void mxt_start(struct mxt_data *data)
+{
+	mxt_wakeup_toggle(data->client, true, false);
+
+	switch (data->suspend_mode) {
+	case MXT_SUSPEND_T9_CTRL:
+		mxt_soft_reset(data);
+
+		/* Touch enable */
+		/* 0x83 = SCANEN | RPTEN | ENABLE */
+		mxt_write_object(data,
+				MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
+		break;
+
+	case MXT_SUSPEND_DEEP_SLEEP:
+	default:
+		mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+
+		/* Recalibrate since chip has been in deep sleep */
+		mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+		break;
+	}
+}
+
+static void mxt_stop(struct mxt_data *data)
+{
+	switch (data->suspend_mode) {
+	case MXT_SUSPEND_T9_CTRL:
+		/* Touch disable */
+		mxt_write_object(data,
+				MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0);
+		break;
+
+	case MXT_SUSPEND_DEEP_SLEEP:
+	default:
+		mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+		break;
+	}
+
+	mxt_wakeup_toggle(data->client, false, false);
+}
+
+static int mxt_input_open(struct input_dev *dev)
+{
+	struct mxt_data *data = input_get_drvdata(dev);
+
+	mxt_start(data);
+
+	return 0;
+}
+
+static void mxt_input_close(struct input_dev *dev)
+{
+	struct mxt_data *data = input_get_drvdata(dev);
+
+	mxt_stop(data);
+}
+
+static int mxt_parse_device_properties(struct mxt_data *data)
+{
+	static const char keymap_property[] = "linux,gpio-keymap";
+	static const char buttons_property[] = "linux,keycodes";
+	struct device *dev = &data->client->dev;
+	u32 *keymap;
+	u32 *buttonmap;
+	int n_keys;
+	int error;
+
+	if (device_property_present(dev, keymap_property)) {
+		n_keys = device_property_count_u32(dev, keymap_property);
+		if (n_keys <= 0) {
+			error = n_keys < 0 ? n_keys : -EINVAL;
+			dev_err(dev, "invalid/malformed '%s' property: %d\n",
+				keymap_property, error);
+			return error;
+		}
+
+		keymap = devm_kmalloc_array(dev, n_keys, sizeof(*keymap),
+					    GFP_KERNEL);
+		if (!keymap)
+			return -ENOMEM;
+
+		error = device_property_read_u32_array(dev, keymap_property,
+						       keymap, n_keys);
+		if (error) {
+			dev_err(dev, "failed to parse '%s' property: %d\n",
+				keymap_property, error);
+			return error;
+		}
+
+		data->t19_keymap = keymap;
+		data->t19_num_keys = n_keys;
+	}
+
+	if (device_property_present(dev, buttons_property)) {
+		n_keys = device_property_count_u32(dev, buttons_property);
+		if (n_keys <= 0) {
+			error = n_keys < 0 ? n_keys : -EINVAL;
+			dev_err(dev, "invalid/malformed '%s' property: %d\n",
+				buttons_property, error);
+			return error;
+		}
+
+		buttonmap = devm_kmalloc_array(dev, n_keys, sizeof(*buttonmap),
+					       GFP_KERNEL);
+		if (!buttonmap)
+			return -ENOMEM;
+
+		error = device_property_read_u32_array(dev, buttons_property,
+						       buttonmap, n_keys);
+		if (error) {
+			dev_err(dev, "failed to parse '%s' property: %d\n",
+				buttons_property, error);
+			return error;
+		}
+
+		data->t15_keymap = buttonmap;
+		data->t15_num_keys = n_keys;
+	}
+
+	return 0;
+}
+
+static const struct dmi_system_id chromebook_T9_suspend_dmi[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "Peppy"),
+		},
+	},
+	{ }
+};
+
+static int mxt_probe(struct i2c_client *client)
+{
+	struct mxt_data *data;
+	int error;
+
+	/*
+	 * Ignore devices that do not have device properties attached to
+	 * them, as we need help determining whether we are dealing with
+	 * touch screen or touchpad.
+	 *
+	 * So far on x86 the only users of Atmel touch controllers are
+	 * Chromebooks, and chromeos_laptop driver will ensure that
+	 * necessary properties are provided (if firmware does not do that).
+	 */
+	if (!device_property_present(&client->dev, "compatible"))
+		return -ENXIO;
+
+	/*
+	 * Ignore ACPI devices representing bootloader mode.
+	 *
+	 * This is a bit of a hack: Google Chromebook BIOS creates ACPI
+	 * devices for both application and bootloader modes, but we are
+	 * interested in application mode only (if device is in bootloader
+	 * mode we'll end up switching into application anyway). So far
+	 * application mode addresses were all above 0x40, so we'll use it
+	 * as a threshold.
+	 */
+	if (ACPI_COMPANION(&client->dev) && client->addr < 0x40)
+		return -ENXIO;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct mxt_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
+		 client->adapter->nr, client->addr);
+
+	data->client = client;
+	data->irq = client->irq;
+	i2c_set_clientdata(client, data);
+
+	init_completion(&data->bl_completion);
+	init_completion(&data->reset_completion);
+	init_completion(&data->crc_completion);
+
+	data->suspend_mode = dmi_check_system(chromebook_T9_suspend_dmi) ?
+		MXT_SUSPEND_T9_CTRL : MXT_SUSPEND_DEEP_SLEEP;
+
+	error = mxt_parse_device_properties(data);
+	if (error)
+		return error;
+
+	/*
+	 * VDDA is the analog voltage supply 2.57..3.47 V
+	 * VDD  is the digital voltage supply 1.71..3.47 V
+	 */
+	data->regulators[0].supply = "vdda";
+	data->regulators[1].supply = "vdd";
+	error = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(data->regulators),
+					data->regulators);
+	if (error) {
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev, "Failed to get regulators %d\n",
+				error);
+		return error;
+	}
+
+	/* Request the RESET line as asserted so we go into reset */
+	data->reset_gpio = devm_gpiod_get_optional(&client->dev,
+						   "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(data->reset_gpio)) {
+		error = PTR_ERR(data->reset_gpio);
+		dev_err(&client->dev, "Failed to get reset gpio: %d\n", error);
+		return error;
+	}
+
+	/* Request the WAKE line as asserted so we go out of sleep */
+	data->wake_gpio = devm_gpiod_get_optional(&client->dev,
+						  "wake", GPIOD_OUT_HIGH);
+	if (IS_ERR(data->wake_gpio)) {
+		error = PTR_ERR(data->wake_gpio);
+		dev_err(&client->dev, "Failed to get wake gpio: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, mxt_interrupt,
+					  IRQF_ONESHOT | IRQF_NO_AUTOEN,
+					  client->name, data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		return error;
+	}
+
+	error = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
+				      data->regulators);
+	if (error) {
+		dev_err(&client->dev, "failed to enable regulators: %d\n",
+			error);
+		return error;
+	}
+	/*
+	 * The device takes 40ms to come up after power-on according
+	 * to the mXT224 datasheet, page 13.
+	 */
+	msleep(MXT_BACKUP_TIME);
+
+	if (data->reset_gpio) {
+		/* Wait a while and then de-assert the RESET GPIO line */
+		msleep(MXT_RESET_GPIO_TIME);
+		gpiod_set_value(data->reset_gpio, 0);
+		msleep(MXT_RESET_INVALID_CHG);
+	}
+
+	/*
+	 * Controllers like mXT1386 have a dedicated WAKE line that could be
+	 * connected to a GPIO or to I2C SCL pin, or permanently asserted low.
+	 *
+	 * This WAKE line is used for waking controller from a deep-sleep and
+	 * it needs to be asserted low for 25 milliseconds before I2C transfers
+	 * could be accepted by controller if it was in a deep-sleep mode.
+	 * Controller will go into sleep automatically after 2 seconds of
+	 * inactivity if WAKE line is deasserted and deep sleep is activated.
+	 *
+	 * If WAKE line is connected to I2C SCL pin, then the first I2C transfer
+	 * will get an instant NAK and transfer needs to be retried after 25ms.
+	 *
+	 * If WAKE line is connected to a GPIO line, the line must be asserted
+	 * 25ms before the host attempts to communicate with the controller.
+	 */
+	device_property_read_u32(&client->dev, "atmel,wakeup-method",
+				 &data->wakeup_method);
+
+	error = mxt_initialize(data);
+	if (error)
+		goto err_disable_regulators;
+
+	error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
+	if (error) {
+		dev_err(&client->dev, "Failure %d creating sysfs group\n",
+			error);
+		goto err_free_object;
+	}
+
+	return 0;
+
+err_free_object:
+	mxt_free_input_device(data);
+	mxt_free_object_table(data);
+err_disable_regulators:
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators),
+			       data->regulators);
+	return error;
+}
+
+static void mxt_remove(struct i2c_client *client)
+{
+	struct mxt_data *data = i2c_get_clientdata(client);
+
+	disable_irq(data->irq);
+	sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
+	mxt_free_input_device(data);
+	mxt_free_object_table(data);
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators),
+			       data->regulators);
+}
+
+static int mxt_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mxt_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+
+	if (!input_dev)
+		return 0;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_device_enabled(input_dev))
+		mxt_stop(data);
+
+	mutex_unlock(&input_dev->mutex);
+
+	disable_irq(data->irq);
+
+	return 0;
+}
+
+static int mxt_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mxt_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+
+	if (!input_dev)
+		return 0;
+
+	enable_irq(data->irq);
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_device_enabled(input_dev))
+		mxt_start(data);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
+
+static const struct of_device_id mxt_of_match[] = {
+	{ .compatible = "atmel,maxtouch", },
+	/* Compatibles listed below are deprecated */
+	{ .compatible = "atmel,qt602240_ts", },
+	{ .compatible = "atmel,atmel_mxt_ts", },
+	{ .compatible = "atmel,atmel_mxt_tp", },
+	{ .compatible = "atmel,mXT224", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mxt_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id mxt_acpi_id[] = {
+	{ "ATML0000", 0 },	/* Touchpad */
+	{ "ATML0001", 0 },	/* Touchscreen */
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, mxt_acpi_id);
+#endif
+
+static const struct i2c_device_id mxt_id[] = {
+	{ "qt602240_ts", 0 },
+	{ "atmel_mxt_ts", 0 },
+	{ "atmel_mxt_tp", 0 },
+	{ "maxtouch", 0 },
+	{ "mXT224", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mxt_id);
+
+static struct i2c_driver mxt_driver = {
+	.driver = {
+		.name	= "atmel_mxt_ts",
+		.of_match_table = mxt_of_match,
+		.acpi_match_table = ACPI_PTR(mxt_acpi_id),
+		.pm	= pm_sleep_ptr(&mxt_pm_ops),
+	},
+	.probe		= mxt_probe,
+	.remove		= mxt_remove,
+	.id_table	= mxt_id,
+};
+
+module_i2c_driver(mxt_driver);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver");
+MODULE_LICENSE("GPL");