Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 150 insertions, 0 deletions

diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
new file mode 100644
index 0000000000..afd6a18417
--- /dev/null
+++ b/drivers/irqchip/irq-gic-common.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/arm-gic.h>
+
+#include "irq-gic-common.h"
+
+static DEFINE_RAW_SPINLOCK(irq_controller_lock);
+
+void gic_enable_of_quirks(const struct device_node *np,
+			  const struct gic_quirk *quirks, void *data)
+{
+	for (; quirks->desc; quirks++) {
+		if (!quirks->compatible && !quirks->property)
+			continue;
+		if (quirks->compatible &&
+		    !of_device_is_compatible(np, quirks->compatible))
+			continue;
+		if (quirks->property &&
+		    !of_property_read_bool(np, quirks->property))
+			continue;
+		if (quirks->init(data))
+			pr_info("GIC: enabling workaround for %s\n",
+				quirks->desc);
+	}
+}
+
+void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
+		void *data)
+{
+	for (; quirks->desc; quirks++) {
+		if (quirks->compatible || quirks->property)
+			continue;
+		if (quirks->iidr != (quirks->mask & iidr))
+			continue;
+		if (quirks->init(data))
+			pr_info("GIC: enabling workaround for %s\n",
+				quirks->desc);
+	}
+}
+
+int gic_configure_irq(unsigned int irq, unsigned int type,
+		       void __iomem *base, void (*sync_access)(void))
+{
+	u32 confmask = 0x2 << ((irq % 16) * 2);
+	u32 confoff = (irq / 16) * 4;
+	u32 val, oldval;
+	int ret = 0;
+	unsigned long flags;
+
+	/*
+	 * Read current configuration register, and insert the config
+	 * for "irq", depending on "type".
+	 */
+	raw_spin_lock_irqsave(&irq_controller_lock, flags);
+	val = oldval = readl_relaxed(base + confoff);
+	if (type & IRQ_TYPE_LEVEL_MASK)
+		val &= ~confmask;
+	else if (type & IRQ_TYPE_EDGE_BOTH)
+		val |= confmask;
+
+	/* If the current configuration is the same, then we are done */
+	if (val == oldval) {
+		raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
+		return 0;
+	}
+
+	/*
+	 * Write back the new configuration, and possibly re-enable
+	 * the interrupt. If we fail to write a new configuration for
+	 * an SPI then WARN and return an error. If we fail to write the
+	 * configuration for a PPI this is most likely because the GIC
+	 * does not allow us to set the configuration or we are in a
+	 * non-secure mode, and hence it may not be catastrophic.
+	 */
+	writel_relaxed(val, base + confoff);
+	if (readl_relaxed(base + confoff) != val)
+		ret = -EINVAL;
+
+	raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
+
+	if (sync_access)
+		sync_access();
+
+	return ret;
+}
+
+void gic_dist_config(void __iomem *base, int gic_irqs,
+		     void (*sync_access)(void))
+{
+	unsigned int i;
+
+	/*
+	 * Set all global interrupts to be level triggered, active low.
+	 */
+	for (i = 32; i < gic_irqs; i += 16)
+		writel_relaxed(GICD_INT_ACTLOW_LVLTRIG,
+					base + GIC_DIST_CONFIG + i / 4);
+
+	/*
+	 * Set priority on all global interrupts.
+	 */
+	for (i = 32; i < gic_irqs; i += 4)
+		writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);
+
+	/*
+	 * Deactivate and disable all SPIs. Leave the PPI and SGIs
+	 * alone as they are in the redistributor registers on GICv3.
+	 */
+	for (i = 32; i < gic_irqs; i += 32) {
+		writel_relaxed(GICD_INT_EN_CLR_X32,
+			       base + GIC_DIST_ACTIVE_CLEAR + i / 8);
+		writel_relaxed(GICD_INT_EN_CLR_X32,
+			       base + GIC_DIST_ENABLE_CLEAR + i / 8);
+	}
+
+	if (sync_access)
+		sync_access();
+}
+
+void gic_cpu_config(void __iomem *base, int nr, void (*sync_access)(void))
+{
+	int i;
+
+	/*
+	 * Deal with the banked PPI and SGI interrupts - disable all
+	 * private interrupts. Make sure everything is deactivated.
+	 */
+	for (i = 0; i < nr; i += 32) {
+		writel_relaxed(GICD_INT_EN_CLR_X32,
+			       base + GIC_DIST_ACTIVE_CLEAR + i / 8);
+		writel_relaxed(GICD_INT_EN_CLR_X32,
+			       base + GIC_DIST_ENABLE_CLEAR + i / 8);
+	}
+
+	/*
+	 * Set priority on PPI and SGI interrupts
+	 */
+	for (i = 0; i < nr; i += 4)
+		writel_relaxed(GICD_INT_DEF_PRI_X4,
+					base + GIC_DIST_PRI + i * 4 / 4);
+
+	if (sync_access)
+		sync_access();
+}