Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 931 insertions, 0 deletions

diff --git a/drivers/media/cec/platform/seco/Makefile b/drivers/media/cec/platform/seco/Makefile
new file mode 100644
index 0000000000..aa1ca8ccdb
--- /dev/null
+++ b/drivers/media/cec/platform/seco/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CEC_SECO) += seco-cec.o
diff --git a/drivers/media/cec/platform/seco/seco-cec.c b/drivers/media/cec/platform/seco/seco-cec.c
new file mode 100644
index 0000000000..5d4c5a2cae
--- /dev/null
+++ b/drivers/media/cec/platform/seco/seco-cec.c
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * CEC driver for SECO X86 Boards
+ *
+ * Author:  Ettore Chimenti <ek5.chimenti@gmail.com>
+ * Copyright (C) 2018, SECO SpA.
+ * Copyright (C) 2018, Aidilab Srl.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+/* CEC Framework */
+#include <media/cec-notifier.h>
+
+#include "seco-cec.h"
+
+struct secocec_data {
+	struct device *dev;
+	struct platform_device *pdev;
+	struct cec_adapter *cec_adap;
+	struct cec_notifier *notifier;
+	struct rc_dev *ir;
+	char ir_input_phys[32];
+	int irq;
+};
+
+#define smb_wr16(cmd, data) smb_word_op(SECOCEC_MICRO_ADDRESS, \
+					cmd, data, SMBUS_WRITE, NULL)
+#define smb_rd16(cmd, res) smb_word_op(SECOCEC_MICRO_ADDRESS, \
+				       cmd, 0, SMBUS_READ, res)
+
+static int smb_word_op(u16 slave_addr, u8 cmd, u16 data,
+		       u8 operation, u16 *result)
+{
+	unsigned int count;
+	int status = 0;
+
+	/* Active wait until ready */
+	for (count = 0; count <= SMBTIMEOUT; ++count) {
+		if (!(inb(HSTS) & BRA_INUSE_STS))
+			break;
+		udelay(SMB_POLL_UDELAY);
+	}
+
+	if (count > SMBTIMEOUT)
+		/* Reset the lock instead of failing */
+		outb(0xff, HSTS);
+
+	outb(0x00, HCNT);
+	outb((u8)(slave_addr & 0xfe) | operation, XMIT_SLVA);
+	outb(cmd, HCMD);
+	inb(HCNT);
+
+	if (operation == SMBUS_WRITE) {
+		outb((u8)data, HDAT0);
+		outb((u8)(data >> 8), HDAT1);
+	}
+
+	outb(BRA_START + BRA_SMB_CMD_WORD_DATA, HCNT);
+
+	for (count = 0; count <= SMBTIMEOUT; count++) {
+		if (!(inb(HSTS) & BRA_HOST_BUSY))
+			break;
+		udelay(SMB_POLL_UDELAY);
+	}
+
+	if (count > SMBTIMEOUT) {
+		status = -EBUSY;
+		goto err;
+	}
+
+	if (inb(HSTS) & BRA_HSTS_ERR_MASK) {
+		status = -EIO;
+		goto err;
+	}
+
+	if (operation == SMBUS_READ)
+		*result = ((inb(HDAT0) & 0xff) + ((inb(HDAT1) & 0xff) << 8));
+
+err:
+	outb(0xff, HSTS);
+	return status;
+}
+
+static int secocec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct secocec_data *cec = cec_get_drvdata(adap);
+	struct device *dev = cec->dev;
+	u16 val = 0;
+	int status;
+
+	if (enable) {
+		/* Clear the status register */
+		status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+		if (status)
+			goto err;
+
+		status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+		if (status)
+			goto err;
+
+		/* Enable the interrupts */
+		status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+		if (status)
+			goto err;
+
+		status = smb_wr16(SECOCEC_ENABLE_REG_1,
+				  val | SECOCEC_ENABLE_REG_1_CEC);
+		if (status)
+			goto err;
+
+		dev_dbg(dev, "Device enabled\n");
+	} else {
+		/* Clear the status register */
+		status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+		status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+
+		/* Disable the interrupts */
+		status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+		status = smb_wr16(SECOCEC_ENABLE_REG_1, val &
+				  ~SECOCEC_ENABLE_REG_1_CEC &
+				  ~SECOCEC_ENABLE_REG_1_IR);
+
+		dev_dbg(dev, "Device disabled\n");
+	}
+
+	return 0;
+err:
+	return status;
+}
+
+static int secocec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	u16 enable_val = 0;
+	int status;
+
+	/* Disable device */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &enable_val);
+	if (status)
+		return status;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1,
+			  enable_val & ~SECOCEC_ENABLE_REG_1_CEC);
+	if (status)
+		return status;
+
+	/* Write logical address
+	 * NOTE: CEC_LOG_ADDR_INVALID is mapped to the 'Unregistered' LA
+	 */
+	status = smb_wr16(SECOCEC_DEVICE_LA, logical_addr & 0xf);
+	if (status)
+		return status;
+
+	/* Re-enable device */
+	status = smb_wr16(SECOCEC_ENABLE_REG_1,
+			  enable_val | SECOCEC_ENABLE_REG_1_CEC);
+	if (status)
+		return status;
+
+	return 0;
+}
+
+static int secocec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				 u32 signal_free_time, struct cec_msg *msg)
+{
+	u16 payload_len, payload_id_len, destination, val = 0;
+	u8 *payload_msg;
+	int status;
+	u8 i;
+
+	/* Device msg len already accounts for header */
+	payload_id_len = msg->len - 1;
+
+	/* Send data length */
+	status = smb_wr16(SECOCEC_WRITE_DATA_LENGTH, payload_id_len);
+	if (status)
+		goto err;
+
+	/* Send Operation ID if present */
+	if (payload_id_len > 0) {
+		status = smb_wr16(SECOCEC_WRITE_OPERATION_ID, msg->msg[1]);
+		if (status)
+			goto err;
+	}
+	/* Send data if present */
+	if (payload_id_len > 1) {
+		/* Only data; */
+		payload_len = msg->len - 2;
+		payload_msg = &msg->msg[2];
+
+		/* Copy message into registers */
+		for (i = 0; i < payload_len; i += 2) {
+			/* hi byte */
+			val = payload_msg[i + 1] << 8;
+
+			/* lo byte */
+			val |= payload_msg[i];
+
+			status = smb_wr16(SECOCEC_WRITE_DATA_00 + i / 2, val);
+			if (status)
+				goto err;
+		}
+	}
+	/* Send msg source/destination and fire msg */
+	destination = msg->msg[0];
+	status = smb_wr16(SECOCEC_WRITE_BYTE0, destination);
+	if (status)
+		goto err;
+
+	return 0;
+
+err:
+	return status;
+}
+
+static void secocec_tx_done(struct cec_adapter *adap, u16 status_val)
+{
+	if (status_val & SECOCEC_STATUS_TX_ERROR_MASK) {
+		if (status_val & SECOCEC_STATUS_TX_NACK_ERROR)
+			cec_transmit_attempt_done(adap, CEC_TX_STATUS_NACK);
+		else
+			cec_transmit_attempt_done(adap, CEC_TX_STATUS_ERROR);
+	} else {
+		cec_transmit_attempt_done(adap, CEC_TX_STATUS_OK);
+	}
+
+	/* Reset status reg */
+	status_val = SECOCEC_STATUS_TX_ERROR_MASK |
+		SECOCEC_STATUS_MSG_SENT_MASK |
+		SECOCEC_STATUS_TX_NACK_ERROR;
+	smb_wr16(SECOCEC_STATUS, status_val);
+}
+
+static void secocec_rx_done(struct cec_adapter *adap, u16 status_val)
+{
+	struct secocec_data *cec = cec_get_drvdata(adap);
+	struct device *dev = cec->dev;
+	struct cec_msg msg = { };
+	bool flag_overflow = false;
+	u8 payload_len, i = 0;
+	u8 *payload_msg;
+	u16 val = 0;
+	int status;
+
+	if (status_val & SECOCEC_STATUS_RX_OVERFLOW_MASK) {
+		/* NOTE: Untested, it also might not be necessary */
+		dev_warn(dev, "Received more than 16 bytes. Discarding\n");
+		flag_overflow = true;
+	}
+
+	if (status_val & SECOCEC_STATUS_RX_ERROR_MASK) {
+		dev_warn(dev, "Message received with errors. Discarding\n");
+		status = -EIO;
+		goto rxerr;
+	}
+
+	/* Read message length */
+	status = smb_rd16(SECOCEC_READ_DATA_LENGTH, &val);
+	if (status)
+		return;
+
+	/* Device msg len already accounts for the header */
+	msg.len = min(val + 1, CEC_MAX_MSG_SIZE);
+
+	/* Read logical address */
+	status = smb_rd16(SECOCEC_READ_BYTE0, &val);
+	if (status)
+		return;
+
+	/* device stores source LA and destination */
+	msg.msg[0] = val;
+
+	/* Read operation ID */
+	status = smb_rd16(SECOCEC_READ_OPERATION_ID, &val);
+	if (status)
+		return;
+
+	msg.msg[1] = val;
+
+	/* Read data if present */
+	if (msg.len > 1) {
+		payload_len = msg.len - 2;
+		payload_msg = &msg.msg[2];
+
+		/* device stores 2 bytes in every 16-bit val */
+		for (i = 0; i < payload_len; i += 2) {
+			status = smb_rd16(SECOCEC_READ_DATA_00 + i / 2, &val);
+			if (status)
+				return;
+
+			/* low byte, skipping header */
+			payload_msg[i] = val & 0x00ff;
+
+			/* hi byte */
+			payload_msg[i + 1] = (val & 0xff00) >> 8;
+		}
+	}
+
+	cec_received_msg(cec->cec_adap, &msg);
+
+	/* Reset status reg */
+	status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK;
+	if (flag_overflow)
+		status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK;
+
+	status = smb_wr16(SECOCEC_STATUS, status_val);
+
+	return;
+
+rxerr:
+	/* Reset error reg */
+	status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK |
+		SECOCEC_STATUS_RX_ERROR_MASK;
+	if (flag_overflow)
+		status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK;
+	smb_wr16(SECOCEC_STATUS, status_val);
+}
+
+static const struct cec_adap_ops secocec_cec_adap_ops = {
+	/* Low-level callbacks */
+	.adap_enable = secocec_adap_enable,
+	.adap_log_addr = secocec_adap_log_addr,
+	.adap_transmit = secocec_adap_transmit,
+};
+
+#ifdef CONFIG_CEC_SECO_RC
+static int secocec_ir_probe(void *priv)
+{
+	struct secocec_data *cec = priv;
+	struct device *dev = cec->dev;
+	int status;
+	u16 val;
+
+	/* Prepare the RC input device */
+	cec->ir = devm_rc_allocate_device(dev, RC_DRIVER_SCANCODE);
+	if (!cec->ir)
+		return -ENOMEM;
+
+	snprintf(cec->ir_input_phys, sizeof(cec->ir_input_phys),
+		 "%s/input0", dev_name(dev));
+
+	cec->ir->device_name = dev_name(dev);
+	cec->ir->input_phys = cec->ir_input_phys;
+	cec->ir->input_id.bustype = BUS_HOST;
+	cec->ir->input_id.vendor = 0;
+	cec->ir->input_id.product = 0;
+	cec->ir->input_id.version = 1;
+	cec->ir->driver_name = SECOCEC_DEV_NAME;
+	cec->ir->allowed_protocols = RC_PROTO_BIT_RC5;
+	cec->ir->priv = cec;
+	cec->ir->map_name = RC_MAP_HAUPPAUGE;
+	cec->ir->timeout = MS_TO_US(100);
+
+	/* Clear the status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+	if (status != 0)
+		goto err;
+
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status != 0)
+		goto err;
+
+	/* Enable the interrupts */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+	if (status != 0)
+		goto err;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1,
+			  val | SECOCEC_ENABLE_REG_1_IR);
+	if (status != 0)
+		goto err;
+
+	dev_dbg(dev, "IR enabled\n");
+
+	status = devm_rc_register_device(dev, cec->ir);
+
+	if (status) {
+		dev_err(dev, "Failed to prepare input device\n");
+		cec->ir = NULL;
+		goto err;
+	}
+
+	return 0;
+
+err:
+	smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+
+	smb_wr16(SECOCEC_ENABLE_REG_1,
+		 val & ~SECOCEC_ENABLE_REG_1_IR);
+
+	dev_dbg(dev, "IR disabled\n");
+	return status;
+}
+
+static int secocec_ir_rx(struct secocec_data *priv)
+{
+	struct secocec_data *cec = priv;
+	struct device *dev = cec->dev;
+	u16 val, status, key, addr, toggle;
+
+	if (!cec->ir)
+		return -ENODEV;
+
+	status = smb_rd16(SECOCEC_IR_READ_DATA, &val);
+	if (status != 0)
+		goto err;
+
+	key = val & SECOCEC_IR_COMMAND_MASK;
+	addr = (val & SECOCEC_IR_ADDRESS_MASK) >> SECOCEC_IR_ADDRESS_SHL;
+	toggle = (val & SECOCEC_IR_TOGGLE_MASK) >> SECOCEC_IR_TOGGLE_SHL;
+
+	rc_keydown(cec->ir, RC_PROTO_RC5, RC_SCANCODE_RC5(addr, key), toggle);
+
+	dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x\n", key,
+		addr, toggle);
+
+	return 0;
+
+err:
+	dev_err(dev, "IR Receive message failed (%d)\n", status);
+	return -EIO;
+}
+#else
+static void secocec_ir_rx(struct secocec_data *priv)
+{
+}
+
+static int secocec_ir_probe(void *priv)
+{
+	return 0;
+}
+#endif
+
+static irqreturn_t secocec_irq_handler(int irq, void *priv)
+{
+	struct secocec_data *cec = priv;
+	struct device *dev = cec->dev;
+	u16 status_val, cec_val, val = 0;
+	int status;
+
+	/*  Read status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &status_val);
+	if (status)
+		goto err;
+
+	if (status_val & SECOCEC_STATUS_REG_1_CEC) {
+		/* Read CEC status register */
+		status = smb_rd16(SECOCEC_STATUS, &cec_val);
+		if (status)
+			goto err;
+
+		if (cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK)
+			secocec_rx_done(cec->cec_adap, cec_val);
+
+		if (cec_val & SECOCEC_STATUS_MSG_SENT_MASK)
+			secocec_tx_done(cec->cec_adap, cec_val);
+
+		if ((~cec_val & SECOCEC_STATUS_MSG_SENT_MASK) &&
+		    (~cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK))
+			dev_warn_once(dev,
+				      "Message not received or sent, but interrupt fired");
+
+		val = SECOCEC_STATUS_REG_1_CEC;
+	}
+
+	if (status_val & SECOCEC_STATUS_REG_1_IR) {
+		val |= SECOCEC_STATUS_REG_1_IR;
+
+		secocec_ir_rx(cec);
+	}
+
+	/*  Reset status register */
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status)
+		goto err;
+
+	return IRQ_HANDLED;
+
+err:
+	dev_err_once(dev, "IRQ: R/W SMBus operation failed %d\n", status);
+
+	/*  Reset status register */
+	val = SECOCEC_STATUS_REG_1_CEC | SECOCEC_STATUS_REG_1_IR;
+	smb_wr16(SECOCEC_STATUS_REG_1, val);
+
+	return IRQ_HANDLED;
+}
+
+struct cec_dmi_match {
+	const char *sys_vendor;
+	const char *product_name;
+	const char *devname;
+	const char *conn;
+};
+
+static const struct cec_dmi_match secocec_dmi_match_table[] = {
+	/* UDOO X86 */
+	{ "SECO", "UDOO x86", "0000:00:02.0", "Port B" },
+};
+
+static struct device *secocec_cec_find_hdmi_dev(struct device *dev,
+						const char **conn)
+{
+	int i;
+
+	for (i = 0 ; i < ARRAY_SIZE(secocec_dmi_match_table) ; ++i) {
+		const struct cec_dmi_match *m = &secocec_dmi_match_table[i];
+
+		if (dmi_match(DMI_SYS_VENDOR, m->sys_vendor) &&
+		    dmi_match(DMI_PRODUCT_NAME, m->product_name)) {
+			struct device *d;
+
+			/* Find the device, bail out if not yet registered */
+			d = bus_find_device_by_name(&pci_bus_type, NULL,
+						    m->devname);
+			if (!d)
+				return ERR_PTR(-EPROBE_DEFER);
+
+			put_device(d);
+			*conn = m->conn;
+			return d;
+		}
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+static int secocec_acpi_probe(struct secocec_data *sdev)
+{
+	struct device *dev = sdev->dev;
+	struct gpio_desc *gpio;
+	int irq = 0;
+
+	gpio = devm_gpiod_get(dev, NULL, GPIOD_IN);
+	if (IS_ERR(gpio)) {
+		dev_err(dev, "Cannot request interrupt gpio\n");
+		return PTR_ERR(gpio);
+	}
+
+	irq = gpiod_to_irq(gpio);
+	if (irq < 0) {
+		dev_err(dev, "Cannot find valid irq\n");
+		return -ENODEV;
+	}
+	dev_dbg(dev, "irq-gpio is bound to IRQ %d\n", irq);
+
+	sdev->irq = irq;
+
+	return 0;
+}
+
+static int secocec_probe(struct platform_device *pdev)
+{
+	struct secocec_data *secocec;
+	struct device *dev = &pdev->dev;
+	struct device *hdmi_dev;
+	const char *conn = NULL;
+	int ret;
+	u16 val;
+
+	hdmi_dev = secocec_cec_find_hdmi_dev(&pdev->dev, &conn);
+	if (IS_ERR(hdmi_dev))
+		return PTR_ERR(hdmi_dev);
+
+	secocec = devm_kzalloc(dev, sizeof(*secocec), GFP_KERNEL);
+	if (!secocec)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, secocec);
+
+	/* Request SMBus regions */
+	if (!request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")) {
+		dev_err(dev, "Request memory region failed\n");
+		return -ENXIO;
+	}
+
+	secocec->pdev = pdev;
+	secocec->dev = dev;
+
+	if (!has_acpi_companion(dev)) {
+		dev_dbg(dev, "Cannot find any ACPI companion\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	ret = secocec_acpi_probe(secocec);
+	if (ret) {
+		dev_err(dev, "Cannot assign gpio to IRQ\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* Firmware version check */
+	ret = smb_rd16(SECOCEC_VERSION, &val);
+	if (ret) {
+		dev_err(dev, "Cannot check fw version\n");
+		goto err;
+	}
+	if (val < SECOCEC_LATEST_FW) {
+		dev_err(dev, "CEC Firmware not supported (v.%04x). Use ver > v.%04x\n",
+			val, SECOCEC_LATEST_FW);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = devm_request_threaded_irq(dev,
+					secocec->irq,
+					NULL,
+					secocec_irq_handler,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dev_name(&pdev->dev), secocec);
+
+	if (ret) {
+		dev_err(dev, "Cannot request IRQ %d\n", secocec->irq);
+		ret = -EIO;
+		goto err;
+	}
+
+	/* Allocate CEC adapter */
+	secocec->cec_adap = cec_allocate_adapter(&secocec_cec_adap_ops,
+						 secocec,
+						 dev_name(dev),
+						 CEC_CAP_DEFAULTS |
+						 CEC_CAP_CONNECTOR_INFO,
+						 SECOCEC_MAX_ADDRS);
+
+	if (IS_ERR(secocec->cec_adap)) {
+		ret = PTR_ERR(secocec->cec_adap);
+		goto err;
+	}
+
+	secocec->notifier = cec_notifier_cec_adap_register(hdmi_dev, conn,
+							   secocec->cec_adap);
+	if (!secocec->notifier) {
+		ret = -ENOMEM;
+		goto err_delete_adapter;
+	}
+
+	ret = cec_register_adapter(secocec->cec_adap, dev);
+	if (ret)
+		goto err_notifier;
+
+	ret = secocec_ir_probe(secocec);
+	if (ret)
+		goto err_notifier;
+
+	platform_set_drvdata(pdev, secocec);
+
+	dev_dbg(dev, "Device registered\n");
+
+	return ret;
+
+err_notifier:
+	cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap);
+err_delete_adapter:
+	cec_delete_adapter(secocec->cec_adap);
+err:
+	release_region(BRA_SMB_BASE_ADDR, 7);
+	dev_err(dev, "%s device probe failed\n", dev_name(dev));
+
+	return ret;
+}
+
+static void secocec_remove(struct platform_device *pdev)
+{
+	struct secocec_data *secocec = platform_get_drvdata(pdev);
+	u16 val;
+
+	if (secocec->ir) {
+		smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+
+		smb_wr16(SECOCEC_ENABLE_REG_1, val & ~SECOCEC_ENABLE_REG_1_IR);
+
+		dev_dbg(&pdev->dev, "IR disabled\n");
+	}
+	cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap);
+	cec_unregister_adapter(secocec->cec_adap);
+
+	release_region(BRA_SMB_BASE_ADDR, 7);
+
+	dev_dbg(&pdev->dev, "CEC device removed\n");
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int secocec_suspend(struct device *dev)
+{
+	int status;
+	u16 val;
+
+	dev_dbg(dev, "Device going to suspend, disabling\n");
+
+	/* Clear the status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status)
+		goto err;
+
+	/* Disable the interrupts */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1, val &
+			  ~SECOCEC_ENABLE_REG_1_CEC & ~SECOCEC_ENABLE_REG_1_IR);
+	if (status)
+		goto err;
+
+	return 0;
+
+err:
+	dev_err(dev, "Suspend failed: %d\n", status);
+	return status;
+}
+
+static int secocec_resume(struct device *dev)
+{
+	int status;
+	u16 val;
+
+	dev_dbg(dev, "Resuming device from suspend\n");
+
+	/* Clear the status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status)
+		goto err;
+
+	/* Enable the interrupts */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1, val | SECOCEC_ENABLE_REG_1_CEC);
+	if (status)
+		goto err;
+
+	dev_dbg(dev, "Device resumed from suspend\n");
+
+	return 0;
+
+err:
+	dev_err(dev, "Resume failed: %d\n", status);
+	return status;
+}
+
+static SIMPLE_DEV_PM_OPS(secocec_pm_ops, secocec_suspend, secocec_resume);
+#define SECOCEC_PM_OPS (&secocec_pm_ops)
+#else
+#define SECOCEC_PM_OPS NULL
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id secocec_acpi_match[] = {
+	{"CEC00001", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(acpi, secocec_acpi_match);
+#endif
+
+static struct platform_driver secocec_driver = {
+	.driver = {
+		   .name = SECOCEC_DEV_NAME,
+		   .acpi_match_table = ACPI_PTR(secocec_acpi_match),
+		   .pm = SECOCEC_PM_OPS,
+	},
+	.probe = secocec_probe,
+	.remove_new = secocec_remove,
+};
+
+module_platform_driver(secocec_driver);
+
+MODULE_DESCRIPTION("SECO CEC X86 Driver");
+MODULE_AUTHOR("Ettore Chimenti <ek5.chimenti@gmail.com>");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/media/cec/platform/seco/seco-cec.h b/drivers/media/cec/platform/seco/seco-cec.h
new file mode 100644
index 0000000000..843de8c7df
--- /dev/null
+++ b/drivers/media/cec/platform/seco/seco-cec.h
@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * SECO X86 Boards CEC register defines
+ *
+ * Author:  Ettore Chimenti <ek5.chimenti@gmail.com>
+ * Copyright (C) 2018, SECO Spa.
+ * Copyright (C) 2018, Aidilab Srl.
+ */
+
+#ifndef __SECO_CEC_H__
+#define __SECO_CEC_H__
+
+#define SECOCEC_MAX_ADDRS		1
+#define SECOCEC_DEV_NAME		"secocec"
+#define SECOCEC_LATEST_FW		0x0f0b
+
+#define SMBTIMEOUT			0xfff
+#define SMB_POLL_UDELAY			10
+
+#define SMBUS_WRITE			0
+#define SMBUS_READ			1
+
+#define CMD_BYTE_DATA			0
+#define CMD_WORD_DATA			1
+
+/*
+ * SMBus definitons for Braswell
+ */
+
+#define BRA_DONE_STATUS			BIT(7)
+#define BRA_INUSE_STS			BIT(6)
+#define BRA_FAILED_OP			BIT(4)
+#define BRA_BUS_ERR			BIT(3)
+#define BRA_DEV_ERR			BIT(2)
+#define BRA_INTR			BIT(1)
+#define BRA_HOST_BUSY			BIT(0)
+#define BRA_HSTS_ERR_MASK   (BRA_FAILED_OP | BRA_BUS_ERR | BRA_DEV_ERR)
+
+#define BRA_PEC_EN			BIT(7)
+#define BRA_START			BIT(6)
+#define BRA_LAST__BYTE			BIT(5)
+#define BRA_INTREN			BIT(0)
+#define BRA_SMB_CMD			(7 << 2)
+#define BRA_SMB_CMD_QUICK		(0 << 2)
+#define BRA_SMB_CMD_BYTE		(1 << 2)
+#define BRA_SMB_CMD_BYTE_DATA		(2 << 2)
+#define BRA_SMB_CMD_WORD_DATA		(3 << 2)
+#define BRA_SMB_CMD_PROCESS_CALL	(4 << 2)
+#define BRA_SMB_CMD_BLOCK		(5 << 2)
+#define BRA_SMB_CMD_I2CREAD		(6 << 2)
+#define BRA_SMB_CMD_BLOCK_PROCESS	(7 << 2)
+
+#define BRA_SMB_BASE_ADDR  0x2040
+#define HSTS               (BRA_SMB_BASE_ADDR + 0)
+#define HCNT               (BRA_SMB_BASE_ADDR + 2)
+#define HCMD               (BRA_SMB_BASE_ADDR + 3)
+#define XMIT_SLVA          (BRA_SMB_BASE_ADDR + 4)
+#define HDAT0              (BRA_SMB_BASE_ADDR + 5)
+#define HDAT1              (BRA_SMB_BASE_ADDR + 6)
+
+/*
+ * Microcontroller Address
+ */
+
+#define SECOCEC_MICRO_ADDRESS		0x40
+
+/*
+ * STM32 SMBus Registers
+ */
+
+#define SECOCEC_VERSION			0x00
+#define SECOCEC_ENABLE_REG_1		0x01
+#define SECOCEC_ENABLE_REG_2		0x02
+#define SECOCEC_STATUS_REG_1		0x03
+#define SECOCEC_STATUS_REG_2		0x04
+
+#define SECOCEC_STATUS			0x28
+#define SECOCEC_DEVICE_LA		0x29
+#define SECOCEC_READ_OPERATION_ID	0x2a
+#define SECOCEC_READ_DATA_LENGTH	0x2b
+#define SECOCEC_READ_DATA_00		0x2c
+#define SECOCEC_READ_DATA_02		0x2d
+#define SECOCEC_READ_DATA_04		0x2e
+#define SECOCEC_READ_DATA_06		0x2f
+#define SECOCEC_READ_DATA_08		0x30
+#define SECOCEC_READ_DATA_10		0x31
+#define SECOCEC_READ_DATA_12		0x32
+#define SECOCEC_READ_BYTE0		0x33
+#define SECOCEC_WRITE_OPERATION_ID	0x34
+#define SECOCEC_WRITE_DATA_LENGTH	0x35
+#define SECOCEC_WRITE_DATA_00		0x36
+#define SECOCEC_WRITE_DATA_02		0x37
+#define SECOCEC_WRITE_DATA_04		0x38
+#define SECOCEC_WRITE_DATA_06		0x39
+#define SECOCEC_WRITE_DATA_08		0x3a
+#define SECOCEC_WRITE_DATA_10		0x3b
+#define SECOCEC_WRITE_DATA_12		0x3c
+#define SECOCEC_WRITE_BYTE0		0x3d
+
+#define SECOCEC_IR_READ_DATA		0x3e
+
+/*
+ * IR
+ */
+
+#define SECOCEC_IR_COMMAND_MASK		0x007F
+#define SECOCEC_IR_COMMAND_SHL		0
+#define SECOCEC_IR_ADDRESS_MASK		0x1F00
+#define SECOCEC_IR_ADDRESS_SHL		8
+#define SECOCEC_IR_TOGGLE_MASK		0x8000
+#define SECOCEC_IR_TOGGLE_SHL		15
+
+/*
+ * Enabling register
+ */
+
+#define SECOCEC_ENABLE_REG_1_CEC		0x1000
+#define SECOCEC_ENABLE_REG_1_IR			0x2000
+#define SECOCEC_ENABLE_REG_1_IR_PASSTHROUGH	0x4000
+
+/*
+ * Status register
+ */
+
+#define SECOCEC_STATUS_REG_1_CEC	SECOCEC_ENABLE_REG_1_CEC
+#define SECOCEC_STATUS_REG_1_IR		SECOCEC_ENABLE_REG_1_IR
+#define SECOCEC_STATUS_REG_1_IR_PASSTHR	SECOCEC_ENABLE_REG_1_IR_PASSTHR
+
+/*
+ * Status data
+ */
+
+#define SECOCEC_STATUS_MSG_RECEIVED_MASK	BIT(0)
+#define SECOCEC_STATUS_RX_ERROR_MASK		BIT(1)
+#define SECOCEC_STATUS_MSG_SENT_MASK		BIT(2)
+#define SECOCEC_STATUS_TX_ERROR_MASK		BIT(3)
+
+#define SECOCEC_STATUS_TX_NACK_ERROR		BIT(4)
+#define SECOCEC_STATUS_RX_OVERFLOW_MASK		BIT(5)
+
+#endif /* __SECO_CEC_H__ */