Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 254 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h b/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
new file mode 100644
index 0000000000..9df34c10d2
--- /dev/null
+++ b/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
@@ -0,0 +1,254 @@
+/*
+  Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc.
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without
+  modification, are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+  * Redistributions in binary form must reproduce the above copyright notice,
+    this list of conditions and the following disclaimer in the documentation
+	and/or other materials provided with the distribution.
+  * Neither the name of Trident Microsystems nor Hauppauge Computer Works
+    nor the names of its contributors may be used to endorse or promote
+	products derived from this software without specific prior written
+	permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/*******************************************************************************
+* FILENAME: $Id: drx_dap_fasi.h,v 1.5 2009/07/07 14:21:40 justin Exp $
+*
+* DESCRIPTION:
+* Part of DRX driver.
+* Data access protocol: Fast Access Sequential Interface (fasi)
+* Fast access, because of short addressing format (16 instead of 32 bits addr)
+* Sequential, because of I2C.
+*
+* USAGE:
+* Include.
+*
+* NOTES:
+*
+*
+*******************************************************************************/
+
+/*-------- compilation control switches --------------------------------------*/
+
+#ifndef __DRX_DAP_FASI_H__
+#define __DRX_DAP_FASI_H__
+
+/*-------- Required includes -------------------------------------------------*/
+
+#include "drx_driver.h"
+
+/*-------- Defines, configuring the API --------------------------------------*/
+
+/********************************************
+* Allowed address formats
+********************************************/
+
+/*
+* Comments about short/long addressing format:
+*
+* The DAP FASI offers long address format (4 bytes) and short address format
+* (2 bytes). The DAP can operate in 3 modes:
+* (1) only short
+* (2) only long
+* (3) both long and short but short preferred and long only when necessary
+*
+* These modes must be selected compile time via compile switches.
+* Compile switch settings for the different modes:
+* (1) DRXDAPFASI_LONG_ADDR_ALLOWED=0, DRXDAPFASI_SHORT_ADDR_ALLOWED=1
+* (2) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=0
+* (3) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=1
+*
+* The default setting will be (3) both long and short.
+* The default setting will need no compile switches.
+* The default setting must be overridden if compile switches are already
+* defined.
+*
+*/
+
+/* set default */
+#if !defined(DRXDAPFASI_LONG_ADDR_ALLOWED)
+#define  DRXDAPFASI_LONG_ADDR_ALLOWED 1
+#endif
+
+/* set default */
+#if !defined(DRXDAPFASI_SHORT_ADDR_ALLOWED)
+#define  DRXDAPFASI_SHORT_ADDR_ALLOWED 1
+#endif
+
+/* check */
+#if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 0) && \
+      (DRXDAPFASI_SHORT_ADDR_ALLOWED == 0))
+#error  At least one of short- or long-addressing format must be allowed.
+*;				/* illegal statement to force compiler error */
+#endif
+
+/********************************************
+* Single/master multi master setting
+********************************************/
+/*
+* Comments about SINGLE MASTER/MULTI MASTER  modes:
+*
+* Consider the two sides:1) the master and 2)the slave.
+*
+* Master:
+* Single/multimaster operation set via DRXDAP_SINGLE_MASTER compile switch
+*  + single master mode means no use of repeated starts
+*  + multi master mode means use of repeated starts
+*  Default is single master.
+*  Default can be overridden by setting the compile switch DRXDAP_SINGLE_MASTER.
+*
+* Slave:
+* Single/multi master selected via the flags in the FASI protocol.
+*  + single master means remember memory address between i2c packets
+*  + multimaster means flush memory address between i2c packets
+*  Default is single master, DAP FASI changes multi-master setting silently
+*  into single master setting. This cannot be overridden.
+*
+*/
+/* set default */
+#ifndef DRXDAP_SINGLE_MASTER
+#define DRXDAP_SINGLE_MASTER 0
+#endif
+
+/********************************************
+* Chunk/mode checking
+********************************************/
+/*
+* Comments about DRXDAP_MAX_WCHUNKSIZE in single or multi master mode and
+* in combination with short and long addressing format. All text below
+* assumes long addressing format. The table also includes information
+* for short ADDRessing format.
+*
+* In single master mode, data can be written by sending the register address
+* first, then two or four bytes of data in the next packet.
+* Because the device address plus a register address equals five bytes,
+* the minimum chunk size must be five.
+* If ten-bit I2C device addresses are used, the minimum chunk size must be six,
+* because the I2C device address will then occupy two bytes when writing.
+*
+* Data in single master mode is transferred as follows:
+* <S> <devW>  a0  a1  a2  a3  <P>
+* <S> <devW>  d0  d1 [d2  d3] <P>
+* ..
+* or
+* ..
+* <S> <devW>  a0  a1  a2  a3  <P>
+* <S> <devR> --- <P>
+*
+* In multi-master mode, the data must immediately follow the address (an I2C
+* stop resets the internal address), and hence the minimum chunk size is
+* 1 <I2C address> + 4 (register address) + 2 (data to send) = 7 bytes (8 if
+* 10-bit I2C device addresses are used).
+*
+* The 7-bit or 10-bit i2c address parameters is a runtime parameter.
+* The other parameters can be limited via compile time switches.
+*
+*-------------------------------------------------------------------------------
+*
+*  Minimum chunk size table (in bytes):
+*
+*       +----------------+----------------+
+*       | 7b i2c addr    | 10b i2c addr   |
+*       +----------------+----------------+
+*       | single | multi | single | multi |
+* ------+--------+-------+--------+-------+
+* short | 3      | 5     | 4      | 6     |
+* long  | 5      | 7     | 6      | 8     |
+* ------+--------+-------+--------+-------+
+*
+*/
+
+/* set default */
+#if !defined(DRXDAP_MAX_WCHUNKSIZE)
+#define  DRXDAP_MAX_WCHUNKSIZE 254
+#endif
+
+/* check */
+#if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 0) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1))
+#if DRXDAP_SINGLE_MASTER
+#define  DRXDAP_MAX_WCHUNKSIZE_MIN 3
+#else
+#define  DRXDAP_MAX_WCHUNKSIZE_MIN 5
+#endif
+#else
+#if DRXDAP_SINGLE_MASTER
+#define  DRXDAP_MAX_WCHUNKSIZE_MIN 5
+#else
+#define  DRXDAP_MAX_WCHUNKSIZE_MIN 7
+#endif
+#endif
+
+#if  DRXDAP_MAX_WCHUNKSIZE <  DRXDAP_MAX_WCHUNKSIZE_MIN
+#if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 0) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1))
+#if DRXDAP_SINGLE_MASTER
+#error  DRXDAP_MAX_WCHUNKSIZE must be at least 3 in single master mode
+*;				/* illegal statement to force compiler error */
+#else
+#error  DRXDAP_MAX_WCHUNKSIZE must be at least 5 in multi master mode
+*;				/* illegal statement to force compiler error */
+#endif
+#else
+#if DRXDAP_SINGLE_MASTER
+#error  DRXDAP_MAX_WCHUNKSIZE must be at least 5 in single master mode
+*;				/* illegal statement to force compiler error */
+#else
+#error  DRXDAP_MAX_WCHUNKSIZE must be at least 7 in multi master mode
+*;				/* illegal statement to force compiler error */
+#endif
+#endif
+#endif
+
+/* set default */
+#if !defined(DRXDAP_MAX_RCHUNKSIZE)
+#define  DRXDAP_MAX_RCHUNKSIZE 254
+#endif
+
+/* check */
+#if  DRXDAP_MAX_RCHUNKSIZE < 2
+#error  DRXDAP_MAX_RCHUNKSIZE must be at least 2
+*;				/* illegal statement to force compiler error */
+#endif
+
+/* check */
+#if  DRXDAP_MAX_RCHUNKSIZE & 1
+#error  DRXDAP_MAX_RCHUNKSIZE must be even
+*;				/* illegal statement to force compiler error */
+#endif
+
+/*-------- Public API functions ----------------------------------------------*/
+
+#define DRXDAP_FASI_RMW           0x10000000
+#define DRXDAP_FASI_BROADCAST     0x20000000
+#define DRXDAP_FASI_CLEARCRC      0x80000000
+#define DRXDAP_FASI_SINGLE_MASTER 0xC0000000
+#define DRXDAP_FASI_MULTI_MASTER  0x40000000
+#define DRXDAP_FASI_SMM_SWITCH    0x40000000	/* single/multi master switch */
+#define DRXDAP_FASI_MODEFLAGS     0xC0000000
+#define DRXDAP_FASI_FLAGS         0xF0000000
+
+#define DRXDAP_FASI_ADDR2BLOCK(addr)  (((addr)>>22)&0x3F)
+#define DRXDAP_FASI_ADDR2BANK(addr)   (((addr)>>16)&0x3F)
+#define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr)&0x7FFF)
+
+#define DRXDAP_FASI_SHORT_FORMAT(addr)     (((addr) & 0xFC30FF80) == 0)
+#define DRXDAP_FASI_LONG_FORMAT(addr)      (((addr) & 0xFC30FF80) != 0)
+#define DRXDAP_FASI_OFFSET_TOO_LARGE(addr) (((addr) & 0x00008000) != 0)
+
+#endif				/* __DRX_DAP_FASI_H__ */