Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 651 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/drx39xyj/drxj.h b/drivers/media/dvb-frontends/drx39xyj/drxj.h
new file mode 100644
index 0000000000..232b3b0d68
--- /dev/null
+++ b/drivers/media/dvb-frontends/drx39xyj/drxj.h
@@ -0,0 +1,651 @@
+
+/*
+  Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc.
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without
+  modification, are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+  * Redistributions in binary form must reproduce the above copyright notice,
+    this list of conditions and the following disclaimer in the documentation
+	and/or other materials provided with the distribution.
+  * Neither the name of Trident Microsystems nor Hauppauge Computer Works
+    nor the names of its contributors may be used to endorse or promote
+	products derived from this software without specific prior written
+	permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+ DRXJ specific header file
+
+ Authors: Dragan Savic, Milos Nikolic, Mihajlo Katona, Tao Ding, Paul Janssen
+*/
+
+#ifndef __DRXJ_H__
+#define __DRXJ_H__
+/*-------------------------------------------------------------------------
+INCLUDES
+-------------------------------------------------------------------------*/
+
+#include "drx_driver.h"
+#include "drx_dap_fasi.h"
+
+/* Check DRX-J specific dap condition */
+/* Multi master mode and short addr format only will not work.
+   RMW, CRC reset, broadcast and switching back to single master mode
+   cannot be done with short addr only in multi master mode. */
+#if ((DRXDAP_SINGLE_MASTER == 0) && (DRXDAPFASI_LONG_ADDR_ALLOWED == 0))
+#error "Multi master mode and short addressing only is an illegal combination"
+	*;			/* Generate a fatal compiler error to make sure it stops here,
+				   this is necessary because not all compilers stop after a #error. */
+#endif
+
+/*-------------------------------------------------------------------------
+TYPEDEFS
+-------------------------------------------------------------------------*/
+/*============================================================================*/
+/*============================================================================*/
+/*== code support ============================================================*/
+/*============================================================================*/
+/*============================================================================*/
+
+/*============================================================================*/
+/*============================================================================*/
+/*== SCU cmd if  =============================================================*/
+/*============================================================================*/
+/*============================================================================*/
+
+	struct drxjscu_cmd {
+		u16 command;
+			/*< Command number */
+		u16 parameter_len;
+			/*< Data length in byte */
+		u16 result_len;
+			/*< result length in byte */
+		u16 *parameter;
+			/*< General purpose param */
+		u16 *result;
+			/*< General purpose param */};
+
+/*============================================================================*/
+/*============================================================================*/
+/*== CTRL CFG related data structures ========================================*/
+/*============================================================================*/
+/*============================================================================*/
+
+/* extra intermediate lock state for VSB,QAM,NTSC */
+#define DRXJ_DEMOD_LOCK       (DRX_LOCK_STATE_1)
+
+/* OOB lock states */
+#define DRXJ_OOB_AGC_LOCK     (DRX_LOCK_STATE_1)	/* analog gain control lock */
+#define DRXJ_OOB_SYNC_LOCK    (DRX_LOCK_STATE_2)	/* digital gain control lock */
+
+/* Intermediate powermodes for DRXJ */
+#define DRXJ_POWER_DOWN_MAIN_PATH   DRX_POWER_MODE_8
+#define DRXJ_POWER_DOWN_CORE        DRX_POWER_MODE_9
+#define DRXJ_POWER_DOWN_PLL         DRX_POWER_MODE_10
+
+/* supstition for GPIO FNC mux */
+#define APP_O                 (0x0000)
+
+/*#define DRX_CTRL_BASE         (0x0000)*/
+
+#define DRXJ_CTRL_CFG_BASE    (0x1000)
+	enum drxj_cfg_type {
+		DRXJ_CFG_AGC_RF = DRXJ_CTRL_CFG_BASE,
+		DRXJ_CFG_AGC_IF,
+		DRXJ_CFG_AGC_INTERNAL,
+		DRXJ_CFG_PRE_SAW,
+		DRXJ_CFG_AFE_GAIN,
+		DRXJ_CFG_SYMBOL_CLK_OFFSET,
+		DRXJ_CFG_ACCUM_CR_RS_CW_ERR,
+		DRXJ_CFG_FEC_MERS_SEQ_COUNT,
+		DRXJ_CFG_OOB_MISC,
+		DRXJ_CFG_SMART_ANT,
+		DRXJ_CFG_OOB_PRE_SAW,
+		DRXJ_CFG_VSB_MISC,
+		DRXJ_CFG_RESET_PACKET_ERR,
+
+		/* ATV (FM) */
+		DRXJ_CFG_ATV_OUTPUT,	/* also for FM (SIF control) but not likely */
+		DRXJ_CFG_ATV_MISC,
+		DRXJ_CFG_ATV_EQU_COEF,
+		DRXJ_CFG_ATV_AGC_STATUS,	/* also for FM ( IF,RF, audioAGC ) */
+
+		DRXJ_CFG_MPEG_OUTPUT_MISC,
+		DRXJ_CFG_HW_CFG,
+		DRXJ_CFG_OOB_LO_POW,
+
+		DRXJ_CFG_MAX	/* dummy, never to be used */};
+
+/*
+* /enum drxj_cfg_smart_ant_io * smart antenna i/o.
+*/
+enum drxj_cfg_smart_ant_io {
+	DRXJ_SMT_ANT_OUTPUT = 0,
+	DRXJ_SMT_ANT_INPUT
+};
+
+/*
+* /struct drxj_cfg_smart_ant * Set smart antenna.
+*/
+	struct drxj_cfg_smart_ant {
+		enum drxj_cfg_smart_ant_io io;
+		u16 ctrl_data;
+	};
+
+/*
+* /struct DRXJAGCSTATUS_t
+* AGC status information from the DRXJ-IQM-AF.
+*/
+struct drxj_agc_status {
+	u16 IFAGC;
+	u16 RFAGC;
+	u16 digital_agc;
+};
+
+/* DRXJ_CFG_AGC_RF, DRXJ_CFG_AGC_IF */
+
+/*
+* /enum drxj_agc_ctrl_mode * Available AGCs modes in the DRXJ.
+*/
+	enum drxj_agc_ctrl_mode {
+		DRX_AGC_CTRL_AUTO = 0,
+		DRX_AGC_CTRL_USER,
+		DRX_AGC_CTRL_OFF};
+
+/*
+* /struct drxj_cfg_agc * Generic interface for all AGCs present on the DRXJ.
+*/
+	struct drxj_cfg_agc {
+		enum drx_standard standard;	/* standard for which these settings apply */
+		enum drxj_agc_ctrl_mode ctrl_mode;	/* off, user, auto          */
+		u16 output_level;	/* range dependent on AGC   */
+		u16 min_output_level;	/* range dependent on AGC   */
+		u16 max_output_level;	/* range dependent on AGC   */
+		u16 speed;	/* range dependent on AGC   */
+		u16 top;	/* rf-agc take over point   */
+		u16 cut_off_current;	/* rf-agc is accelerated if output current
+					   is below cut-off current                */};
+
+/* DRXJ_CFG_PRE_SAW */
+
+/*
+* /struct drxj_cfg_pre_saw * Interface to configure pre SAW sense.
+*/
+	struct drxj_cfg_pre_saw {
+		enum drx_standard standard;	/* standard to which these settings apply */
+		u16 reference;	/* pre SAW reference value, range 0 .. 31 */
+		bool use_pre_saw;	/* true algorithms must use pre SAW sense */};
+
+/* DRXJ_CFG_AFE_GAIN */
+
+/*
+* /struct drxj_cfg_afe_gain * Interface to configure gain of AFE (LNA + PGA).
+*/
+	struct drxj_cfg_afe_gain {
+		enum drx_standard standard;	/* standard to which these settings apply */
+		u16 gain;	/* gain in 0.1 dB steps, DRXJ range 140 .. 335 */};
+
+/*
+* /struct drxjrs_errors
+* Available failure information in DRXJ_FEC_RS.
+*
+* Container for errors that are received in the most recently finished measurement period
+*
+*/
+	struct drxjrs_errors {
+		u16 nr_bit_errors;
+				/*< no of pre RS bit errors          */
+		u16 nr_symbol_errors;
+				/*< no of pre RS symbol errors       */
+		u16 nr_packet_errors;
+				/*< no of pre RS packet errors       */
+		u16 nr_failures;
+				/*< no of post RS failures to decode */
+		u16 nr_snc_par_fail_count;
+				/*< no of post RS bit erros          */
+	};
+
+/*
+* /struct drxj_cfg_vsb_misc * symbol error rate
+*/
+	struct drxj_cfg_vsb_misc {
+		u32 symb_error;
+			      /*< symbol error rate sps */};
+
+/*
+* /enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
+*
+*/
+	enum drxj_mpeg_start_width {
+		DRXJ_MPEG_START_WIDTH_1CLKCYC,
+		DRXJ_MPEG_START_WIDTH_8CLKCYC};
+
+/*
+* /enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
+*
+*/
+	enum drxj_mpeg_output_clock_rate {
+		DRXJ_MPEGOUTPUT_CLOCK_RATE_AUTO,
+		DRXJ_MPEGOUTPUT_CLOCK_RATE_75973K,
+		DRXJ_MPEGOUTPUT_CLOCK_RATE_50625K,
+		DRXJ_MPEGOUTPUT_CLOCK_RATE_37968K,
+		DRXJ_MPEGOUTPUT_CLOCK_RATE_30375K,
+		DRXJ_MPEGOUTPUT_CLOCK_RATE_25313K,
+		DRXJ_MPEGOUTPUT_CLOCK_RATE_21696K};
+
+/*
+* /struct DRXJCfgMisc_t
+* Change TEI bit of MPEG output
+* reverse MPEG output bit order
+* set MPEG output clock rate
+*/
+	struct drxj_cfg_mpeg_output_misc {
+		bool disable_tei_handling;	      /*< if true pass (not change) TEI bit */
+		bool bit_reverse_mpeg_outout;	      /*< if true, parallel: msb on MD0; serial: lsb out first */
+		enum drxj_mpeg_output_clock_rate mpeg_output_clock_rate;
+						      /*< set MPEG output clock rate that overwirtes the derived one from symbol rate */
+		enum drxj_mpeg_start_width mpeg_start_width;  /*< set MPEG output start width */};
+
+/*
+* /enum drxj_xtal_freq * Supported external crystal reference frequency.
+*/
+	enum drxj_xtal_freq {
+		DRXJ_XTAL_FREQ_RSVD,
+		DRXJ_XTAL_FREQ_27MHZ,
+		DRXJ_XTAL_FREQ_20P25MHZ,
+		DRXJ_XTAL_FREQ_4MHZ};
+
+/*
+* /enum drxj_xtal_freq * Supported external crystal reference frequency.
+*/
+	enum drxji2c_speed {
+		DRXJ_I2C_SPEED_400KBPS,
+		DRXJ_I2C_SPEED_100KBPS};
+
+/*
+* /struct drxj_cfg_hw_cfg * Get hw configuration, such as crystal
+*  reference frequency, I2C speed, etc...
+*/
+	struct drxj_cfg_hw_cfg {
+		enum drxj_xtal_freq xtal_freq;
+				   /*< crystal reference frequency */
+		enum drxji2c_speed i2c_speed;
+				   /*< 100 or 400 kbps */};
+
+/*
+ *  DRXJ_CFG_ATV_MISC
+ */
+	struct drxj_cfg_atv_misc {
+		s16 peak_filter;	/* -8 .. 15 */
+		u16 noise_filter;	/* 0 .. 15 */};
+
+/*
+ *  struct drxj_cfg_oob_misc */
+#define   DRXJ_OOB_STATE_RESET                                        0x0
+#define   DRXJ_OOB_STATE_AGN_HUNT                                     0x1
+#define   DRXJ_OOB_STATE_DGN_HUNT                                     0x2
+#define   DRXJ_OOB_STATE_AGC_HUNT                                     0x3
+#define   DRXJ_OOB_STATE_FRQ_HUNT                                     0x4
+#define   DRXJ_OOB_STATE_PHA_HUNT                                     0x8
+#define   DRXJ_OOB_STATE_TIM_HUNT                                     0x10
+#define   DRXJ_OOB_STATE_EQU_HUNT                                     0x20
+#define   DRXJ_OOB_STATE_EQT_HUNT                                     0x30
+#define   DRXJ_OOB_STATE_SYNC                                         0x40
+
+struct drxj_cfg_oob_misc {
+	struct drxj_agc_status agc;
+	bool eq_lock;
+	bool sym_timing_lock;
+	bool phase_lock;
+	bool freq_lock;
+	bool dig_gain_lock;
+	bool ana_gain_lock;
+	u8 state;
+};
+
+/*
+ *  Index of in array of coef
+ */
+	enum drxj_cfg_oob_lo_power {
+		DRXJ_OOB_LO_POW_MINUS0DB = 0,
+		DRXJ_OOB_LO_POW_MINUS5DB,
+		DRXJ_OOB_LO_POW_MINUS10DB,
+		DRXJ_OOB_LO_POW_MINUS15DB,
+		DRXJ_OOB_LO_POW_MAX};
+
+/*
+ *  DRXJ_CFG_ATV_EQU_COEF
+ */
+	struct drxj_cfg_atv_equ_coef {
+		s16 coef0;	/* -256 .. 255 */
+		s16 coef1;	/* -256 .. 255 */
+		s16 coef2;	/* -256 .. 255 */
+		s16 coef3;	/* -256 .. 255 */};
+
+/*
+ *  Index of in array of coef
+ */
+	enum drxj_coef_array_index {
+		DRXJ_COEF_IDX_MN = 0,
+		DRXJ_COEF_IDX_FM,
+		DRXJ_COEF_IDX_L,
+		DRXJ_COEF_IDX_LP,
+		DRXJ_COEF_IDX_BG,
+		DRXJ_COEF_IDX_DK,
+		DRXJ_COEF_IDX_I,
+		DRXJ_COEF_IDX_MAX};
+
+/*
+ *  DRXJ_CFG_ATV_OUTPUT
+ */
+
+/*
+* /enum DRXJAttenuation_t
+* Attenuation setting for SIF AGC.
+*
+*/
+	enum drxjsif_attenuation {
+		DRXJ_SIF_ATTENUATION_0DB,
+		DRXJ_SIF_ATTENUATION_3DB,
+		DRXJ_SIF_ATTENUATION_6DB,
+		DRXJ_SIF_ATTENUATION_9DB};
+
+/*
+* /struct drxj_cfg_atv_output * SIF attenuation setting.
+*
+*/
+struct drxj_cfg_atv_output {
+	bool enable_cvbs_output;	/* true= enabled */
+	bool enable_sif_output;	/* true= enabled */
+	enum drxjsif_attenuation sif_attenuation;
+};
+
+/*
+   DRXJ_CFG_ATV_AGC_STATUS (get only)
+*/
+/* TODO : AFE interface not yet finished, subject to change */
+	struct drxj_cfg_atv_agc_status {
+		u16 rf_agc_gain;	/* 0 .. 877 uA */
+		u16 if_agc_gain;	/* 0 .. 877  uA */
+		s16 video_agc_gain;	/* -75 .. 1972 in 0.1 dB steps */
+		s16 audio_agc_gain;	/* -4 .. 1020 in 0.1 dB steps */
+		u16 rf_agc_loop_gain;	/* 0 .. 7 */
+		u16 if_agc_loop_gain;	/* 0 .. 7 */
+		u16 video_agc_loop_gain;	/* 0 .. 7 */};
+
+/*============================================================================*/
+/*============================================================================*/
+/*== CTRL related data structures ============================================*/
+/*============================================================================*/
+/*============================================================================*/
+
+/* NONE */
+
+/*============================================================================*/
+/*============================================================================*/
+
+/*========================================*/
+/*
+* /struct struct drxj_data * DRXJ specific attributes.
+*
+* Global data container for DRXJ specific data.
+*
+*/
+	struct drxj_data {
+		/* device capabilities (determined during drx_open()) */
+		bool has_lna;		  /*< true if LNA (aka PGA) present */
+		bool has_oob;		  /*< true if OOB supported */
+		bool has_ntsc;		  /*< true if NTSC supported */
+		bool has_btsc;		  /*< true if BTSC supported */
+		bool has_smatx;	  /*< true if mat_tx is available */
+		bool has_smarx;	  /*< true if mat_rx is available */
+		bool has_gpio;		  /*< true if GPIO is available */
+		bool has_irqn;		  /*< true if IRQN is available */
+		/* A1/A2/A... */
+		u8 mfx;		  /*< metal fix */
+
+		/* tuner settings */
+		bool mirror_freq_spect_oob;/*< tuner inversion (true = tuner mirrors the signal */
+
+		/* standard/channel settings */
+		enum drx_standard standard;	  /*< current standard information                     */
+		enum drx_modulation constellation;
+					  /*< current constellation                            */
+		s32 frequency; /*< center signal frequency in KHz                   */
+		enum drx_bandwidth curr_bandwidth;
+					  /*< current channel bandwidth                        */
+		enum drx_mirror mirror;	  /*< current channel mirror                           */
+
+		/* signal quality information */
+		u32 fec_bits_desired;	  /*< BER accounting period                            */
+		u16 fec_vd_plen;	  /*< no of trellis symbols: VD SER measurement period */
+		u16 qam_vd_prescale;	  /*< Viterbi Measurement Prescale                     */
+		u16 qam_vd_period;	  /*< Viterbi Measurement period                       */
+		u16 fec_rs_plen;	  /*< defines RS BER measurement period                */
+		u16 fec_rs_prescale;	  /*< ReedSolomon Measurement Prescale                 */
+		u16 fec_rs_period;	  /*< ReedSolomon Measurement period                   */
+		bool reset_pkt_err_acc;	  /*< Set a flag to reset accumulated packet error     */
+		u16 pkt_err_acc_start;	  /*< Set a flag to reset accumulated packet error     */
+
+		/* HI configuration */
+		u16 hi_cfg_timing_div;	  /*< HI Configure() parameter 2                       */
+		u16 hi_cfg_bridge_delay;	  /*< HI Configure() parameter 3                       */
+		u16 hi_cfg_wake_up_key;	  /*< HI Configure() parameter 4                       */
+		u16 hi_cfg_ctrl;	  /*< HI Configure() parameter 5                       */
+		u16 hi_cfg_transmit;	  /*< HI Configure() parameter 6                       */
+
+		/* UIO configuration */
+		enum drxuio_mode uio_sma_rx_mode;/*< current mode of SmaRx pin                        */
+		enum drxuio_mode uio_sma_tx_mode;/*< current mode of SmaTx pin                        */
+		enum drxuio_mode uio_gpio_mode; /*< current mode of ASEL pin                         */
+		enum drxuio_mode uio_irqn_mode; /*< current mode of IRQN pin                         */
+
+		/* IQM fs frequency shift and inversion */
+		u32 iqm_fs_rate_ofs;	   /*< frequency shifter setting after setchannel      */
+		bool pos_image;	   /*< True: positive image                            */
+		/* IQM RC frequency shift */
+		u32 iqm_rc_rate_ofs;	   /*< frequency shifter setting after setchannel      */
+
+		/* ATV configuration */
+		u32 atv_cfg_changed_flags; /*< flag: flags cfg changes */
+		s16 atv_top_equ0[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU0__A */
+		s16 atv_top_equ1[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU1__A */
+		s16 atv_top_equ2[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU2__A */
+		s16 atv_top_equ3[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU3__A */
+		bool phase_correction_bypass;/*< flag: true=bypass */
+		s16 atv_top_vid_peak;	  /*< shadow of ATV_TOP_VID_PEAK__A */
+		u16 atv_top_noise_th;	  /*< shadow of ATV_TOP_NOISE_TH__A */
+		bool enable_cvbs_output;  /*< flag CVBS output enable */
+		bool enable_sif_output;	  /*< flag SIF output enable */
+		 enum drxjsif_attenuation sif_attenuation;
+					  /*< current SIF att setting */
+		/* Agc configuration for QAM and VSB */
+		struct drxj_cfg_agc qam_rf_agc_cfg; /*< qam RF AGC config */
+		struct drxj_cfg_agc qam_if_agc_cfg; /*< qam IF AGC config */
+		struct drxj_cfg_agc vsb_rf_agc_cfg; /*< vsb RF AGC config */
+		struct drxj_cfg_agc vsb_if_agc_cfg; /*< vsb IF AGC config */
+
+		/* PGA gain configuration for QAM and VSB */
+		u16 qam_pga_cfg;	  /*< qam PGA config */
+		u16 vsb_pga_cfg;	  /*< vsb PGA config */
+
+		/* Pre SAW configuration for QAM and VSB */
+		struct drxj_cfg_pre_saw qam_pre_saw_cfg;
+					  /*< qam pre SAW config */
+		struct drxj_cfg_pre_saw vsb_pre_saw_cfg;
+					  /*< qam pre SAW config */
+
+		/* Version information */
+		char v_text[2][12];	  /*< allocated text versions */
+		struct drx_version v_version[2]; /*< allocated versions structs */
+		struct drx_version_list v_list_elements[2];
+					  /*< allocated version list */
+
+		/* smart antenna configuration */
+		bool smart_ant_inverted;
+
+		/* Tracking filter setting for OOB */
+		u16 oob_trk_filter_cfg[8];
+		bool oob_power_on;
+
+		/* MPEG static bitrate setting */
+		u32 mpeg_ts_static_bitrate;  /*< bitrate static MPEG output */
+		bool disable_te_ihandling;  /*< MPEG TS TEI handling */
+		bool bit_reverse_mpeg_outout;/*< MPEG output bit order */
+		 enum drxj_mpeg_output_clock_rate mpeg_output_clock_rate;
+					    /*< MPEG output clock rate */
+		 enum drxj_mpeg_start_width mpeg_start_width;
+					    /*< MPEG Start width */
+
+		/* Pre SAW & Agc configuration for ATV */
+		struct drxj_cfg_pre_saw atv_pre_saw_cfg;
+					  /*< atv pre SAW config */
+		struct drxj_cfg_agc atv_rf_agc_cfg; /*< atv RF AGC config */
+		struct drxj_cfg_agc atv_if_agc_cfg; /*< atv IF AGC config */
+		u16 atv_pga_cfg;	  /*< atv pga config    */
+
+		u32 curr_symbol_rate;
+
+		/* pin-safe mode */
+		bool pdr_safe_mode;	    /*< PDR safe mode activated      */
+		u16 pdr_safe_restore_val_gpio;
+		u16 pdr_safe_restore_val_v_sync;
+		u16 pdr_safe_restore_val_sma_rx;
+		u16 pdr_safe_restore_val_sma_tx;
+
+		/* OOB pre-saw value */
+		u16 oob_pre_saw;
+		enum drxj_cfg_oob_lo_power oob_lo_pow;
+
+		struct drx_aud_data aud_data;
+				    /*< audio storage                  */};
+
+/*-------------------------------------------------------------------------
+Access MACROS
+-------------------------------------------------------------------------*/
+/*
+* \brief Compilable references to attributes
+* \param d pointer to demod instance
+*
+* Used as main reference to an attribute field.
+* Can be used by both macro implementation and function implementation.
+* These macros are defined to avoid duplication of code in macro and function
+* definitions that handle access of demod common or extended attributes.
+*
+*/
+
+#define DRXJ_ATTR_BTSC_DETECT(d)                       \
+			(((struct drxj_data *)(d)->my_ext_attr)->aud_data.btsc_detect)
+
+/*-------------------------------------------------------------------------
+DEFINES
+-------------------------------------------------------------------------*/
+
+/*
+* \def DRXJ_NTSC_CARRIER_FREQ_OFFSET
+* \brief Offset from picture carrier to centre frequency in kHz, in RF domain
+*
+* For NTSC standard.
+* NTSC channels are listed by their picture carrier frequency (Fpc).
+* The function DRX_CTRL_SET_CHANNEL requires the centre frequency as input.
+* In case the tuner module is not used the DRX-J requires that the tuner is
+* tuned to the centre frequency of the channel:
+*
+* Fcentre = Fpc + DRXJ_NTSC_CARRIER_FREQ_OFFSET
+*
+*/
+#define DRXJ_NTSC_CARRIER_FREQ_OFFSET           ((s32)(1750))
+
+/*
+* \def DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET
+* \brief Offset from picture carrier to centre frequency in kHz, in RF domain
+*
+* For PAL/SECAM - BG standard. This define is needed in case the tuner module
+* is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc).
+* The DRX-J requires that the tuner is tuned to:
+* Fpc + DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET
+*
+* In case the tuner module is used the drxdriver takes care of this.
+* In case the tuner module is NOT used the application programmer must take
+* care of this.
+*
+*/
+#define DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET   ((s32)(2375))
+
+/*
+* \def DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET
+* \brief Offset from picture carrier to centre frequency in kHz, in RF domain
+*
+* For PAL/SECAM - DK, I, L standards. This define is needed in case the tuner module
+* is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc).
+* The DRX-J requires that the tuner is tuned to:
+* Fpc + DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET
+*
+* In case the tuner module is used the drxdriver takes care of this.
+* In case the tuner module is NOT used the application programmer must take
+* care of this.
+*
+*/
+#define DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET ((s32)(2775))
+
+/*
+* \def DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET
+* \brief Offset from picture carrier to centre frequency in kHz, in RF domain
+*
+* For PAL/SECAM - LP standard. This define is needed in case the tuner module
+* is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc).
+* The DRX-J requires that the tuner is tuned to:
+* Fpc + DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET
+*
+* In case the tuner module is used the drxdriver takes care of this.
+* In case the tuner module is NOT used the application programmer must take
+* care of this.
+*/
+#define DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET   ((s32)(-3255))
+
+/*
+* \def DRXJ_FM_CARRIER_FREQ_OFFSET
+* \brief Offset from sound carrier to centre frequency in kHz, in RF domain
+*
+* For FM standard.
+* FM channels are listed by their sound carrier frequency (Fsc).
+* The function DRX_CTRL_SET_CHANNEL requires the Ffm frequency (see below) as
+* input.
+* In case the tuner module is not used the DRX-J requires that the tuner is
+* tuned to the Ffm frequency of the channel.
+*
+* Ffm = Fsc + DRXJ_FM_CARRIER_FREQ_OFFSET
+*
+*/
+#define DRXJ_FM_CARRIER_FREQ_OFFSET             ((s32)(-3000))
+
+/* Revision types -------------------------------------------------------*/
+
+#define DRXJ_TYPE_ID (0x3946000DUL)
+
+/* Macros ---------------------------------------------------------------*/
+
+/* Convert OOB lock status to string */
+#define DRXJ_STR_OOB_LOCKSTATUS(x) ( \
+	(x == DRX_NEVER_LOCK) ? "Never" : \
+	(x == DRX_NOT_LOCKED) ? "No" : \
+	(x == DRX_LOCKED) ? "Locked" : \
+	(x == DRX_LOCK_STATE_1) ? "AGC lock" : \
+	(x == DRX_LOCK_STATE_2) ? "sync lock" : \
+	"(Invalid)")
+
+#endif				/* __DRXJ_H__ */