Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 878 insertions, 0 deletions

diff --git a/drivers/media/pci/saa7146/mxb.c b/drivers/media/pci/saa7146/mxb.c
new file mode 100644
index 0000000000..a14b839098
--- /dev/null
+++ b/drivers/media/pci/saa7146/mxb.c
@@ -0,0 +1,878 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+    mxb - v4l2 driver for the Multimedia eXtension Board
+
+    Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de>
+
+    Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html
+    for further details about this card.
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DEBUG_VARIABLE debug
+
+#include <media/drv-intf/saa7146_vv.h>
+#include <media/tuner.h>
+#include <media/v4l2-common.h>
+#include <media/i2c/saa7115.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include "tea6415c.h"
+#include "tea6420.h"
+
+#define MXB_AUDIOS	6
+
+#define I2C_SAA7111A  0x24
+#define	I2C_TDA9840   0x42
+#define	I2C_TEA6415C  0x43
+#define	I2C_TEA6420_1 0x4c
+#define	I2C_TEA6420_2 0x4d
+#define	I2C_TUNER     0x60
+
+#define MXB_BOARD_CAN_DO_VBI(dev)   (dev->revision != 0)
+
+/* global variable */
+static int mxb_num;
+
+/* initial frequence the tuner will be tuned to.
+   in verden (lower saxony, germany) 4148 is a
+   channel called "phoenix" */
+static int freq = 4148;
+module_param(freq, int, 0644);
+MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup");
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
+
+#define MXB_STD (V4L2_STD_PAL_BG | V4L2_STD_PAL_I | V4L2_STD_SECAM | V4L2_STD_NTSC)
+#define MXB_INPUTS 4
+enum { TUNER, AUX1, AUX3, AUX3_YC };
+
+static struct v4l2_input mxb_inputs[MXB_INPUTS] = {
+	{ TUNER,   "Tuner",          V4L2_INPUT_TYPE_TUNER,  0x3f, 0,
+		V4L2_STD_PAL_BG | V4L2_STD_PAL_I, 0, V4L2_IN_CAP_STD },
+	{ AUX1,	   "AUX1",           V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
+		MXB_STD, 0, V4L2_IN_CAP_STD },
+	{ AUX3,	   "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
+		MXB_STD, 0, V4L2_IN_CAP_STD },
+	{ AUX3_YC, "AUX3 S-Video",   V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
+		MXB_STD, 0, V4L2_IN_CAP_STD },
+};
+
+/* this array holds the information, which port of the saa7146 each
+   input actually uses. the mxb uses port 0 for every input */
+static struct {
+	int hps_source;
+	int hps_sync;
+} input_port_selection[MXB_INPUTS] = {
+	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+};
+
+/* this array holds the information of the audio source (mxb_audios),
+   which has to be switched corresponding to the video source (mxb_channels) */
+static int video_audio_connect[MXB_INPUTS] =
+	{ 0, 1, 3, 3 };
+
+struct mxb_routing {
+	u32 input;
+	u32 output;
+};
+
+/* these are the available audio sources, which can switched
+   to the line- and cd-output individually */
+static struct v4l2_audio mxb_audios[MXB_AUDIOS] = {
+	    {
+		.index	= 0,
+		.name	= "Tuner",
+		.capability = V4L2_AUDCAP_STEREO,
+	} , {
+		.index	= 1,
+		.name	= "AUX1",
+		.capability = V4L2_AUDCAP_STEREO,
+	} , {
+		.index	= 2,
+		.name	= "AUX2",
+		.capability = V4L2_AUDCAP_STEREO,
+	} , {
+		.index	= 3,
+		.name	= "AUX3",
+		.capability = V4L2_AUDCAP_STEREO,
+	} , {
+		.index	= 4,
+		.name	= "Radio (X9)",
+		.capability = V4L2_AUDCAP_STEREO,
+	} , {
+		.index	= 5,
+		.name	= "CD-ROM (X10)",
+		.capability = V4L2_AUDCAP_STEREO,
+	}
+};
+
+/* These are the necessary input-output-pins for bringing one audio source
+   (see above) to the CD-output. Note that gain is set to 0 in this table. */
+static struct mxb_routing TEA6420_cd[MXB_AUDIOS + 1][2] = {
+	{ { 1, 1 }, { 1, 1 } },	/* Tuner */
+	{ { 5, 1 }, { 6, 1 } },	/* AUX 1 */
+	{ { 4, 1 }, { 6, 1 } },	/* AUX 2 */
+	{ { 3, 1 }, { 6, 1 } },	/* AUX 3 */
+	{ { 1, 1 }, { 3, 1 } },	/* Radio */
+	{ { 1, 1 }, { 2, 1 } },	/* CD-Rom */
+	{ { 6, 1 }, { 6, 1 } }	/* Mute */
+};
+
+/* These are the necessary input-output-pins for bringing one audio source
+   (see above) to the line-output. Note that gain is set to 0 in this table. */
+static struct mxb_routing TEA6420_line[MXB_AUDIOS + 1][2] = {
+	{ { 2, 3 }, { 1, 2 } },
+	{ { 5, 3 }, { 6, 2 } },
+	{ { 4, 3 }, { 6, 2 } },
+	{ { 3, 3 }, { 6, 2 } },
+	{ { 2, 3 }, { 3, 2 } },
+	{ { 2, 3 }, { 2, 2 } },
+	{ { 6, 3 }, { 6, 2 } }	/* Mute */
+};
+
+struct mxb
+{
+	struct video_device	video_dev;
+	struct video_device	vbi_dev;
+
+	struct i2c_adapter	i2c_adapter;
+
+	struct v4l2_subdev	*saa7111a;
+	struct v4l2_subdev	*tda9840;
+	struct v4l2_subdev	*tea6415c;
+	struct v4l2_subdev	*tuner;
+	struct v4l2_subdev	*tea6420_1;
+	struct v4l2_subdev	*tea6420_2;
+
+	int	cur_mode;	/* current audio mode (mono, stereo, ...) */
+	int	cur_input;	/* current input */
+	int	cur_audinput;	/* current audio input */
+	int	cur_mute;	/* current mute status */
+	struct v4l2_frequency	cur_freq;	/* current frequency the tuner is tuned to */
+};
+
+#define saa7111a_call(mxb, o, f, args...) \
+	v4l2_subdev_call(mxb->saa7111a, o, f, ##args)
+#define tda9840_call(mxb, o, f, args...) \
+	v4l2_subdev_call(mxb->tda9840, o, f, ##args)
+#define tea6415c_call(mxb, o, f, args...) \
+	v4l2_subdev_call(mxb->tea6415c, o, f, ##args)
+#define tuner_call(mxb, o, f, args...) \
+	v4l2_subdev_call(mxb->tuner, o, f, ##args)
+#define call_all(dev, o, f, args...) \
+	v4l2_device_call_until_err(&dev->v4l2_dev, 0, o, f, ##args)
+
+static void mxb_update_audmode(struct mxb *mxb)
+{
+	struct v4l2_tuner t = {
+		.audmode = mxb->cur_mode,
+	};
+
+	tda9840_call(mxb, tuner, s_tuner, &t);
+}
+
+static inline void tea6420_route(struct mxb *mxb, int idx)
+{
+	v4l2_subdev_call(mxb->tea6420_1, audio, s_routing,
+		TEA6420_cd[idx][0].input, TEA6420_cd[idx][0].output, 0);
+	v4l2_subdev_call(mxb->tea6420_2, audio, s_routing,
+		TEA6420_cd[idx][1].input, TEA6420_cd[idx][1].output, 0);
+	v4l2_subdev_call(mxb->tea6420_1, audio, s_routing,
+		TEA6420_line[idx][0].input, TEA6420_line[idx][0].output, 0);
+	v4l2_subdev_call(mxb->tea6420_2, audio, s_routing,
+		TEA6420_line[idx][1].input, TEA6420_line[idx][1].output, 0);
+}
+
+static struct saa7146_extension extension;
+
+static int mxb_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct saa7146_dev *dev = container_of(ctrl->handler,
+				struct saa7146_dev, ctrl_handler);
+	struct mxb *mxb = dev->ext_priv;
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		mxb->cur_mute = ctrl->val;
+		/* switch the audio-source */
+		tea6420_route(mxb, ctrl->val ? 6 :
+				video_audio_connect[mxb->cur_input]);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops mxb_ctrl_ops = {
+	.s_ctrl = mxb_s_ctrl,
+};
+
+static int mxb_probe(struct saa7146_dev *dev)
+{
+	struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
+	struct mxb *mxb = NULL;
+
+	v4l2_ctrl_new_std(hdl, &mxb_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	if (hdl->error)
+		return hdl->error;
+	mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL);
+	if (mxb == NULL) {
+		DEB_D("not enough kernel memory\n");
+		return -ENOMEM;
+	}
+
+
+	snprintf(mxb->i2c_adapter.name, sizeof(mxb->i2c_adapter.name), "mxb%d", mxb_num);
+
+	saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
+	if (i2c_add_adapter(&mxb->i2c_adapter) < 0) {
+		DEB_S("cannot register i2c-device. skipping.\n");
+		kfree(mxb);
+		return -EFAULT;
+	}
+
+	mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"saa7111", I2C_SAA7111A, NULL);
+	mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"tea6420", I2C_TEA6420_1, NULL);
+	mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"tea6420", I2C_TEA6420_2, NULL);
+	mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"tea6415c", I2C_TEA6415C, NULL);
+	mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"tda9840", I2C_TDA9840, NULL);
+	mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"tuner", I2C_TUNER, NULL);
+
+	/* check if all devices are present */
+	if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
+	    !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) {
+		pr_err("did not find all i2c devices. aborting\n");
+		i2c_del_adapter(&mxb->i2c_adapter);
+		kfree(mxb);
+		return -ENODEV;
+	}
+
+	/* all devices are present, probe was successful */
+
+	/* we store the pointer in our private data field */
+	dev->ext_priv = mxb;
+
+	v4l2_ctrl_handler_setup(hdl);
+
+	return 0;
+}
+
+/* some init data for the saa7740, the so-called 'sound arena module'.
+   there are no specs available, so we simply use some init values */
+static struct {
+	int	length;
+	char	data[9];
+} mxb_saa7740_init[] = {
+	{ 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } },
+	{ 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } },
+	{ 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } },
+	{ 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } },
+	{ 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } },
+	{ 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } },
+	{ 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } },
+	{ 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } },
+	{ 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } },
+	{ 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } },
+	{ 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } },
+	{ 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } },
+	{ 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } },
+	{ 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } },
+	{ 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } },
+	{ 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } },
+	{ 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } },
+	{ 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } },
+	{ 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } },
+	{ 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } },
+	{ 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } },
+	{ 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } },
+	{ 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } },
+	{ 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } },
+	{ 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } },
+	{ 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } },
+	{ 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } },
+	{ 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } },
+	{ 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } },
+	{ 3, { 0x48, 0x00, 0x01 } },
+	{ 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
+	{ 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
+	{ 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
+	{ 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
+	{ 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
+	{ 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
+	{ 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
+	{ 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
+	{ 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
+	{ 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
+	{ 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
+	{ 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
+	{ 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
+	{ 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
+	{ 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
+	{ 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
+	{ 3, { 0x80, 0xb3, 0x0a } },
+	{-1, { 0 } }
+};
+
+/* bring hardware to a sane state. this has to be done, just in case someone
+   wants to capture from this device before it has been properly initialized.
+   the capture engine would badly fail, because no valid signal arrives on the
+   saa7146, thus leading to timeouts and stuff. */
+static int mxb_init_done(struct saa7146_dev* dev)
+{
+	struct mxb* mxb = (struct mxb*)dev->ext_priv;
+	struct i2c_msg msg;
+	struct tuner_setup tun_setup;
+	v4l2_std_id std = V4L2_STD_PAL_BG;
+
+	int i, err = 0;
+
+	/* mute audio on tea6420s */
+	tea6420_route(mxb, 6);
+
+	/* select video mode in saa7111a */
+	saa7111a_call(mxb, video, s_std, std);
+
+	/* select tuner-output on saa7111a */
+	saa7111a_call(mxb, video, s_routing, SAA7115_COMPOSITE0,
+		SAA7111_FMT_CCIR, 0);
+
+	/* select a tuner type */
+	tun_setup.mode_mask = T_ANALOG_TV;
+	tun_setup.addr = ADDR_UNSET;
+	tun_setup.type = TUNER_PHILIPS_PAL;
+	tuner_call(mxb, tuner, s_type_addr, &tun_setup);
+	/* tune in some frequency on tuner */
+	mxb->cur_freq.tuner = 0;
+	mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV;
+	mxb->cur_freq.frequency = freq;
+	tuner_call(mxb, tuner, s_frequency, &mxb->cur_freq);
+
+	/* set a default video standard */
+	/* These two gpio calls set the GPIO pins that control the tda9820 */
+	saa7146_write(dev, GPIO_CTRL, 0x00404050);
+	saa7111a_call(mxb, core, s_gpio, 1);
+	saa7111a_call(mxb, video, s_std, std);
+	tuner_call(mxb, video, s_std, std);
+
+	/* switch to tuner-channel on tea6415c */
+	tea6415c_call(mxb, video, s_routing, 3, 17, 0);
+
+	/* select tuner-output on multicable on tea6415c */
+	tea6415c_call(mxb, video, s_routing, 3, 13, 0);
+
+	/* the rest for mxb */
+	mxb->cur_input = 0;
+	mxb->cur_audinput = video_audio_connect[mxb->cur_input];
+	mxb->cur_mute = 1;
+
+	mxb->cur_mode = V4L2_TUNER_MODE_STEREO;
+	mxb_update_audmode(mxb);
+
+	/* check if the saa7740 (aka 'sound arena module') is present
+	   on the mxb. if so, we must initialize it. due to lack of
+	   information about the saa7740, the values were reverse
+	   engineered. */
+	msg.addr = 0x1b;
+	msg.flags = 0;
+	msg.len = mxb_saa7740_init[0].length;
+	msg.buf = &mxb_saa7740_init[0].data[0];
+
+	err = i2c_transfer(&mxb->i2c_adapter, &msg, 1);
+	if (err == 1) {
+		/* the sound arena module is a pos, that's probably the reason
+		   philips refuses to hand out a datasheet for the saa7740...
+		   it seems to screw up the i2c bus, so we disable fast irq
+		   based i2c transactions here and rely on the slow and safe
+		   polling method ... */
+		extension.flags &= ~SAA7146_USE_I2C_IRQ;
+		for (i = 1; ; i++) {
+			if (-1 == mxb_saa7740_init[i].length)
+				break;
+
+			msg.len = mxb_saa7740_init[i].length;
+			msg.buf = &mxb_saa7740_init[i].data[0];
+			err = i2c_transfer(&mxb->i2c_adapter, &msg, 1);
+			if (err != 1) {
+				DEB_D("failed to initialize 'sound arena module'\n");
+				goto err;
+			}
+		}
+		pr_info("'sound arena module' detected\n");
+	}
+err:
+	/* the rest for saa7146: you should definitely set some basic values
+	   for the input-port handling of the saa7146. */
+
+	/* ext->saa has been filled by the core driver */
+
+	/* some stuff is done via variables */
+	saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source,
+			input_port_selection[mxb->cur_input].hps_sync);
+
+	/* some stuff is done via direct write to the registers */
+
+	/* this is ugly, but because of the fact that this is completely
+	   hardware dependend, it should be done directly... */
+	saa7146_write(dev, DD1_STREAM_B,	0x00000000);
+	saa7146_write(dev, DD1_INIT,		0x02000200);
+	saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+
+	return 0;
+}
+
+/* interrupt-handler. this gets called when irq_mask is != 0.
+   it must clear the interrupt-bits in irq_mask it has handled */
+/*
+void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask)
+{
+	struct mxb* mxb = (struct mxb*)dev->ext_priv;
+}
+*/
+
+static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
+{
+	DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index);
+	if (i->index >= MXB_INPUTS)
+		return -EINVAL;
+	memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input));
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *fh, unsigned int *i)
+{
+	struct saa7146_dev *dev = video_drvdata(file);
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+	*i = mxb->cur_input;
+
+	DEB_EE("VIDIOC_G_INPUT %d\n", *i);
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
+{
+	struct saa7146_dev *dev = video_drvdata(file);
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+	int err = 0;
+	int i = 0;
+
+	DEB_EE("VIDIOC_S_INPUT %d\n", input);
+
+	if (input >= MXB_INPUTS)
+		return -EINVAL;
+
+	mxb->cur_input = input;
+
+	saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source,
+			input_port_selection[input].hps_sync);
+
+	/* prepare switching of tea6415c and saa7111a;
+	   have a look at the 'background'-file for further information  */
+	switch (input) {
+	case TUNER:
+		i = SAA7115_COMPOSITE0;
+
+		err = tea6415c_call(mxb, video, s_routing, 3, 17, 0);
+
+		/* connect tuner-output always to multicable */
+		if (!err)
+			err = tea6415c_call(mxb, video, s_routing, 3, 13, 0);
+		break;
+	case AUX3_YC:
+		/* nothing to be done here. aux3_yc is
+		   directly connected to the saa711a */
+		i = SAA7115_SVIDEO1;
+		break;
+	case AUX3:
+		/* nothing to be done here. aux3 is
+		   directly connected to the saa711a */
+		i = SAA7115_COMPOSITE1;
+		break;
+	case AUX1:
+		i = SAA7115_COMPOSITE0;
+		err = tea6415c_call(mxb, video, s_routing, 1, 17, 0);
+		break;
+	}
+
+	if (err)
+		return err;
+
+	mxb->video_dev.tvnorms = mxb_inputs[input].std;
+	mxb->vbi_dev.tvnorms = mxb_inputs[input].std;
+
+	/* switch video in saa7111a */
+	if (saa7111a_call(mxb, video, s_routing, i, SAA7111_FMT_CCIR, 0))
+		pr_err("VIDIOC_S_INPUT: could not address saa7111a\n");
+
+	mxb->cur_audinput = video_audio_connect[input];
+	/* switch the audio-source only if necessary */
+	if (0 == mxb->cur_mute)
+		tea6420_route(mxb, mxb->cur_audinput);
+	if (mxb->cur_audinput == 0)
+		mxb_update_audmode(mxb);
+
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *t)
+{
+	struct saa7146_dev *dev = video_drvdata(file);
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	if (t->index) {
+		DEB_D("VIDIOC_G_TUNER: channel %d does not have a tuner attached\n",
+		      t->index);
+		return -EINVAL;
+	}
+
+	DEB_EE("VIDIOC_G_TUNER: %d\n", t->index);
+
+	memset(t, 0, sizeof(*t));
+	strscpy(t->name, "TV Tuner", sizeof(t->name));
+	t->type = V4L2_TUNER_ANALOG_TV;
+	t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO |
+			V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
+	t->audmode = mxb->cur_mode;
+	return call_all(dev, tuner, g_tuner, t);
+}
+
+static int vidioc_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *t)
+{
+	struct saa7146_dev *dev = video_drvdata(file);
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	if (t->index) {
+		DEB_D("VIDIOC_S_TUNER: channel %d does not have a tuner attached\n",
+		      t->index);
+		return -EINVAL;
+	}
+
+	mxb->cur_mode = t->audmode;
+	return call_all(dev, tuner, s_tuner, t);
+}
+
+static int vidioc_querystd(struct file *file, void *fh, v4l2_std_id *norm)
+{
+	struct saa7146_dev *dev = video_drvdata(file);
+
+	return call_all(dev, video, querystd, norm);
+}
+
+static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *f)
+{
+	struct saa7146_dev *dev = video_drvdata(file);
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	if (f->tuner)
+		return -EINVAL;
+	*f = mxb->cur_freq;
+
+	DEB_EE("VIDIOC_G_FREQ: freq:0x%08x\n", mxb->cur_freq.frequency);
+	return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *f)
+{
+	struct saa7146_dev *dev = video_drvdata(file);
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	if (f->tuner)
+		return -EINVAL;
+
+	if (V4L2_TUNER_ANALOG_TV != f->type)
+		return -EINVAL;
+
+	DEB_EE("VIDIOC_S_FREQUENCY: freq:0x%08x\n", mxb->cur_freq.frequency);
+
+	/* tune in desired frequency */
+	tuner_call(mxb, tuner, s_frequency, f);
+	/* let the tuner subdev clamp the frequency to the tuner range */
+	mxb->cur_freq = *f;
+	tuner_call(mxb, tuner, g_frequency, &mxb->cur_freq);
+	if (mxb->cur_audinput == 0)
+		mxb_update_audmode(mxb);
+	return 0;
+}
+
+static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a)
+{
+	if (a->index >= MXB_AUDIOS)
+		return -EINVAL;
+	*a = mxb_audios[a->index];
+	return 0;
+}
+
+static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a)
+{
+	struct saa7146_dev *dev = video_drvdata(file);
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	DEB_EE("VIDIOC_G_AUDIO\n");
+	*a = mxb_audios[mxb->cur_audinput];
+	return 0;
+}
+
+static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a)
+{
+	struct saa7146_dev *dev = video_drvdata(file);
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	DEB_D("VIDIOC_S_AUDIO %d\n", a->index);
+	if (a->index >= 32 ||
+	    !(mxb_inputs[mxb->cur_input].audioset & (1 << a->index)))
+		return -EINVAL;
+
+	if (mxb->cur_audinput != a->index) {
+		mxb->cur_audinput = a->index;
+		tea6420_route(mxb, a->index);
+		if (mxb->cur_audinput == 0)
+			mxb_update_audmode(mxb);
+	}
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vidioc_g_register(struct file *file, void *fh, struct v4l2_dbg_register *reg)
+{
+	struct saa7146_dev *dev = video_drvdata(file);
+
+	if (reg->reg > pci_resource_len(dev->pci, 0) - 4)
+		return -EINVAL;
+	reg->val = saa7146_read(dev, reg->reg);
+	reg->size = 4;
+	return 0;
+}
+
+static int vidioc_s_register(struct file *file, void *fh, const struct v4l2_dbg_register *reg)
+{
+	struct saa7146_dev *dev = video_drvdata(file);
+
+	if (reg->reg > pci_resource_len(dev->pci, 0) - 4)
+		return -EINVAL;
+	saa7146_write(dev, reg->reg, reg->val);
+	return 0;
+}
+#endif
+
+static struct saa7146_ext_vv vv_data;
+
+/* this function only gets called when the probing was successful */
+static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
+{
+	struct mxb *mxb;
+	int ret;
+
+	DEB_EE("dev:%p\n", dev);
+
+	ret = saa7146_vv_init(dev, &vv_data);
+	if (ret) {
+		ERR("Error in saa7146_vv_init()");
+		return ret;
+	}
+
+	if (mxb_probe(dev)) {
+		saa7146_vv_release(dev);
+		return -1;
+	}
+	mxb = (struct mxb *)dev->ext_priv;
+
+	vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
+	vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
+	vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
+	vv_data.vid_ops.vidioc_querystd = vidioc_querystd;
+	vv_data.vid_ops.vidioc_g_tuner = vidioc_g_tuner;
+	vv_data.vid_ops.vidioc_s_tuner = vidioc_s_tuner;
+	vv_data.vid_ops.vidioc_g_frequency = vidioc_g_frequency;
+	vv_data.vid_ops.vidioc_s_frequency = vidioc_s_frequency;
+	vv_data.vid_ops.vidioc_enumaudio = vidioc_enumaudio;
+	vv_data.vid_ops.vidioc_g_audio = vidioc_g_audio;
+	vv_data.vid_ops.vidioc_s_audio = vidioc_s_audio;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	vv_data.vid_ops.vidioc_g_register = vidioc_g_register;
+	vv_data.vid_ops.vidioc_s_register = vidioc_s_register;
+#endif
+	vv_data.vbi_ops.vidioc_enum_input = vidioc_enum_input;
+	vv_data.vbi_ops.vidioc_g_input = vidioc_g_input;
+	vv_data.vbi_ops.vidioc_s_input = vidioc_s_input;
+	vv_data.vbi_ops.vidioc_querystd = vidioc_querystd;
+	vv_data.vbi_ops.vidioc_g_tuner = vidioc_g_tuner;
+	vv_data.vbi_ops.vidioc_s_tuner = vidioc_s_tuner;
+	vv_data.vbi_ops.vidioc_g_frequency = vidioc_g_frequency;
+	vv_data.vbi_ops.vidioc_s_frequency = vidioc_s_frequency;
+	vv_data.vbi_ops.vidioc_enumaudio = vidioc_enumaudio;
+	vv_data.vbi_ops.vidioc_g_audio = vidioc_g_audio;
+	vv_data.vbi_ops.vidioc_s_audio = vidioc_s_audio;
+	if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_VIDEO)) {
+		ERR("cannot register capture v4l2 device. skipping.\n");
+		saa7146_vv_release(dev);
+		return -1;
+	}
+
+	/* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/
+	if (MXB_BOARD_CAN_DO_VBI(dev)) {
+		if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) {
+			ERR("cannot register vbi v4l2 device. skipping.\n");
+		}
+	}
+
+	pr_info("found Multimedia eXtension Board #%d\n", mxb_num);
+
+	mxb_num++;
+	mxb_init_done(dev);
+	return 0;
+}
+
+static int mxb_detach(struct saa7146_dev *dev)
+{
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	DEB_EE("dev:%p\n", dev);
+
+	/* mute audio on tea6420s */
+	tea6420_route(mxb, 6);
+
+	saa7146_unregister_device(&mxb->video_dev,dev);
+	if (MXB_BOARD_CAN_DO_VBI(dev))
+		saa7146_unregister_device(&mxb->vbi_dev, dev);
+	saa7146_vv_release(dev);
+
+	mxb_num--;
+
+	i2c_del_adapter(&mxb->i2c_adapter);
+	kfree(mxb);
+
+	return 0;
+}
+
+static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard)
+{
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	if (V4L2_STD_PAL_I == standard->id) {
+		v4l2_std_id std = V4L2_STD_PAL_I;
+
+		DEB_D("VIDIOC_S_STD: setting mxb for PAL_I\n");
+		/* These two gpio calls set the GPIO pins that control the tda9820 */
+		saa7146_write(dev, GPIO_CTRL, 0x00404050);
+		saa7111a_call(mxb, core, s_gpio, 0);
+		saa7111a_call(mxb, video, s_std, std);
+		if (mxb->cur_input == 0)
+			tuner_call(mxb, video, s_std, std);
+	} else {
+		v4l2_std_id std = V4L2_STD_PAL_BG;
+
+		if (mxb->cur_input)
+			std = standard->id;
+		DEB_D("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM\n");
+		/* These two gpio calls set the GPIO pins that control the tda9820 */
+		saa7146_write(dev, GPIO_CTRL, 0x00404050);
+		saa7111a_call(mxb, core, s_gpio, 1);
+		saa7111a_call(mxb, video, s_std, std);
+		if (mxb->cur_input == 0)
+			tuner_call(mxb, video, s_std, std);
+	}
+	return 0;
+}
+
+static struct saa7146_standard standard[] = {
+	{
+		.name	= "PAL-BG",	.id	= V4L2_STD_PAL_BG,
+		.v_offset	= 0x17,	.v_field	= 288,
+		.h_offset	= 0x14,	.h_pixels	= 680,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}, {
+		.name	= "PAL-I",	.id	= V4L2_STD_PAL_I,
+		.v_offset	= 0x17,	.v_field	= 288,
+		.h_offset	= 0x14,	.h_pixels	= 680,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}, {
+		.name	= "NTSC",	.id	= V4L2_STD_NTSC,
+		.v_offset	= 0x16,	.v_field	= 240,
+		.h_offset	= 0x06,	.h_pixels	= 708,
+		.v_max_out	= 480,	.h_max_out	= 640,
+	}, {
+		.name	= "SECAM",	.id	= V4L2_STD_SECAM,
+		.v_offset	= 0x14,	.v_field	= 288,
+		.h_offset	= 0x14,	.h_pixels	= 720,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}
+};
+
+static struct saa7146_pci_extension_data mxb = {
+	.ext_priv = "Multimedia eXtension Board",
+	.ext = &extension,
+};
+
+static const struct pci_device_id pci_tbl[] = {
+	{
+		.vendor    = PCI_VENDOR_ID_PHILIPS,
+		.device	   = PCI_DEVICE_ID_PHILIPS_SAA7146,
+		.subvendor = 0x0000,
+		.subdevice = 0x0000,
+		.driver_data = (unsigned long)&mxb,
+	}, {
+		.vendor	= 0,
+	}
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_ext_vv vv_data = {
+	.inputs		= MXB_INPUTS,
+	.capabilities	= V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_AUDIO,
+	.stds		= &standard[0],
+	.num_stds	= ARRAY_SIZE(standard),
+	.std_callback	= &std_callback,
+};
+
+static struct saa7146_extension extension = {
+	.name		= "Multimedia eXtension Board",
+	.flags		= SAA7146_USE_I2C_IRQ,
+
+	.pci_tbl	= &pci_tbl[0],
+	.module		= THIS_MODULE,
+
+	.attach		= mxb_attach,
+	.detach		= mxb_detach,
+
+	.irq_mask	= 0,
+	.irq_func	= NULL,
+};
+
+static int __init mxb_init_module(void)
+{
+	if (saa7146_register_extension(&extension)) {
+		DEB_S("failed to register extension\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit mxb_cleanup_module(void)
+{
+	saa7146_unregister_extension(&extension);
+}
+
+module_init(mxb_init_module);
+module_exit(mxb_cleanup_module);
+
+MODULE_DESCRIPTION("video4linux-2 driver for the Siemens-Nixdorf 'Multimedia eXtension board'");
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_LICENSE("GPL");