Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 509 insertions, 0 deletions

diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
new file mode 100644
index 0000000000..d52eccdc7e
--- /dev/null
+++ b/drivers/media/radio/Kconfig
@@ -0,0 +1,509 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Multimedia Video device configuration
+#
+
+menuconfig RADIO_ADAPTERS
+	tristate "Radio Adapters"
+	depends on VIDEO_DEV
+	depends on MEDIA_RADIO_SUPPORT
+	default VIDEO_DEV
+	help
+	  Say Y here to enable selecting AM/FM radio adapters.
+
+if RADIO_ADAPTERS
+
+config RADIO_MAXIRADIO
+	tristate "Guillemot MAXI Radio FM 2000 radio"
+	depends on PCI && HAS_IOPORT
+	select RADIO_TEA575X
+	help
+	  Choose Y here if you have this radio card.  This card may also be
+	  found as Gemtek PCI FM.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux API.  Information on
+	  this API and pointers to "v4l" programs may be found at
+	  <file:Documentation/userspace-api/media/index.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-maxiradio.
+
+config RADIO_SAA7706H
+	tristate "SAA7706H Car Radio DSP"
+	depends on I2C
+	help
+	  Say Y here if you want to use the SAA7706H Car radio Digital
+	  Signal Processor, found for instance on the Russellville development
+	  board. On the russellville the device is connected to internal
+	  timberdale I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called SAA7706H.
+
+config RADIO_SHARK
+	tristate "Griffin radioSHARK USB radio receiver"
+	depends on USB
+	select RADIO_TEA575X
+	help
+	  Choose Y here if you have this radio receiver.
+
+	  There are 2 versions of this device, this driver is for version 1,
+	  which is white.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux API.  Information on
+	  this API and pointers to "v4l" programs may be found at
+	  <file:Documentation/userspace-api/media/index.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-shark.
+
+config RADIO_SHARK2
+	tristate "Griffin radioSHARK2 USB radio receiver"
+	depends on USB
+	help
+	  Choose Y here if you have this radio receiver.
+
+	  There are 2 versions of this device, this driver is for version 2,
+	  which is black.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux API.  Information on
+	  this API and pointers to "v4l" programs may be found at
+	  <file:Documentation/userspace-api/media/index.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-shark2.
+
+config RADIO_SI4713
+	tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support"
+
+config RADIO_SI476X
+	tristate "Silicon Laboratories Si476x I2C FM Radio"
+	depends on I2C
+	depends on MFD_SI476X_CORE
+	depends on SND_SOC
+	select SND_SOC_SI476X
+	help
+	  Choose Y here if you have this FM radio chip.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux 2 API.  Information on
+	  this API and pointers to "v4l2" programs may be found at
+	  <file:Documentation/userspace-api/media/index.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-si476x.
+
+config RADIO_TEA575X
+	tristate
+
+config RADIO_TEA5764
+	tristate "TEA5764 I2C FM radio support"
+	depends on I2C
+	help
+	  Say Y here if you want to use the TEA5764 FM chip found in
+	  EZX phones. This FM chip is present in EZX phones from Motorola,
+	  connected to internal pxa I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-tea5764.
+
+config RADIO_TEA5764_XTAL
+	bool "TEA5764 crystal reference"
+	depends on RADIO_TEA5764=y
+	default y
+	help
+	  Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
+	  here if TEA5764 reference frequency is connected in FREQIN.
+
+config RADIO_TEF6862
+	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
+	depends on I2C
+	help
+	  Say Y here if you want to use the TEF6862 Car Radio Enhanced
+	  Selectivity Tuner, found for instance on the Russellville development
+	  board. On the russellville the device is connected to internal
+	  timberdale I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called TEF6862.
+
+config RADIO_TIMBERDALE
+	tristate "Enable the Timberdale radio driver"
+	depends on MFD_TIMBERDALE
+	depends on I2C	# for RADIO_SAA7706H
+	select RADIO_TEF6862
+	select RADIO_SAA7706H
+	help
+	  This is a kind of umbrella driver for the Radio Tuner and DSP
+	  found behind the Timberdale FPGA on the Russellville board.
+	  Enabling this driver will automatically select the DSP and tuner.
+
+config RADIO_WL1273
+	tristate "Texas Instruments WL1273 I2C FM Radio"
+	depends on I2C
+	select MFD_CORE
+	select MFD_WL1273_CORE
+	select FW_LOADER
+	help
+	  Choose Y here if you have this FM radio chip.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux 2 API.  Information on
+	  this API and pointers to "v4l2" programs may be found at
+	  <file:Documentation/userspace-api/media/index.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-wl1273.
+
+config USB_DSBR
+	tristate "D-Link/GemTek USB FM radio support"
+	depends on USB
+	help
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port. Note that the audio is not digital, and
+	  you must connect the line out connector to a sound card or a
+	  set of speakers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dsbr100.
+
+config USB_KEENE
+	tristate "Keene FM Transmitter USB support"
+	depends on USB
+	help
+	  Say Y here if you want to connect this type of FM transmitter
+	  to your computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-keene.
+
+config USB_MA901
+	tristate "Masterkit MA901 USB FM radio support"
+	depends on USB
+	help
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port. Note that the audio is not digital, and
+	  you must connect the line out connector to a sound card or a
+	  set of speakers or headphones.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-ma901.
+
+config USB_MR800
+	tristate "AverMedia MR 800 USB FM radio support"
+	depends on USB
+	help
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port. Note that the audio is not digital, and
+	  you must connect the line out connector to a sound card or a
+	  set of speakers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-mr800.
+
+config USB_RAREMONO
+	tristate "Thanko's Raremono AM/FM/SW radio support"
+	depends on USB
+	help
+	  The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc.
+	  It is one of the very few or perhaps the only consumer USB radio device
+	  to receive the AM/FM/SW bands.
+
+	  Say Y here if you want to connect this type of AM/FM/SW receiver
+	  to your computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-raremono.
+
+source "drivers/media/radio/si470x/Kconfig"
+source "drivers/media/radio/si4713/Kconfig"
+
+# TI's ST based wl128x FM radio
+
+source "drivers/media/radio/wl128x/Kconfig"
+
+#
+# ISA drivers configuration
+#
+
+menuconfig V4L_RADIO_ISA_DRIVERS
+	bool "ISA radio devices"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	help
+	  Say Y here to enable support for these ISA drivers.
+
+if V4L_RADIO_ISA_DRIVERS
+
+config RADIO_AZTECH
+	tristate "Aztech/Packard Bell Radio"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have one of these FM radio cards, and then fill
+	  in the port address below.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-aztech.
+
+config RADIO_AZTECH_PORT
+	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
+	depends on RADIO_AZTECH=y
+	default "350"
+	help
+	  Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
+	  haven't changed the setting of jumper JP3 on the card.  Removing the
+	  jumper sets the card to 0x358.
+
+config RADIO_CADET
+	tristate "ADS Cadet AM/FM Tuner"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	help
+	  Choose Y here if you have one of these AM/FM radio cards, and then
+	  fill in the port address below.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-cadet.
+
+config RADIO_GEMTEK
+	tristate "GemTek Radio card (or compatible) support"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have this FM radio card, and then fill in the
+	  I/O port address and settings below. The following cards either have
+	  GemTek Radio tuner or are rebranded GemTek Radio cards:
+
+	  - Sound Vision 16 Gold with FM Radio
+	  - Typhoon Radio card (some models)
+	  - Hama Radio card
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-gemtek.
+
+config RADIO_GEMTEK_PORT
+	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
+	depends on RADIO_GEMTEK=y
+	default "34c"
+	help
+	  Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
+	  card default is 0x34c, if you haven't changed the jumper setting
+	  on the card.
+
+	  On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
+	  port is 0x20c, 0x248 or 0x28c.
+
+	  If automatic I/O port probing is enabled this port will be used only
+	  in case of automatic probing failure, ie. as a fallback.
+
+config RADIO_GEMTEK_PROBE
+	bool "Automatic I/O port probing"
+	depends on RADIO_GEMTEK=y
+	default y
+	help
+	  Say Y here to enable automatic probing for GemTek Radio card. The
+	  following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
+	  0x28c.
+
+config RADIO_ISA
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	tristate
+
+config RADIO_MIROPCM20
+	tristate "miroSOUND PCM20 radio"
+	depends on ISA || COMPILE_TEST
+	depends on ISA_DMA_API && SND
+	select SND_ISA
+	select SND_MIRO
+	help
+	  Choose Y here if you have this FM radio card. You also need to enable
+	  the ALSA sound system. This choice automatically selects the ALSA
+	  sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
+	  is required for the radio-miropcm20.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-miropcm20.
+
+config RADIO_RTRACK
+	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have one of these FM radio cards, and then fill
+	  in the port address below.
+
+	  Note that newer AIMSlab RadioTrack cards have a different chipset
+	  and are not supported by this driver.  For these cards, use the
+	  RadioTrack II driver below.
+
+	  If you have a GemTeks combined (PnP) sound- and radio card you must
+	  use this driver as a module and setup the card with isapnptools.
+	  You must also pass the module a suitable io parameter, 0x248 has
+	  been reported to be used by these cards.
+
+	  More information is contained in the file
+	  <file:Documentation/driver-api/media/drivers/radiotrack.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-aimslab.
+
+config RADIO_RTRACK2
+	tristate "AIMSlab RadioTrack II support"
+	depends on ISA || COMPILE_TEST
+	select RADIO_ISA
+	help
+	  Choose Y here if you have this FM radio card, and then fill in the
+	  port address below.
+
+	  Note: this driver hasn't been tested since a long time due to lack
+	  of hardware. If you have this hardware, then please contact the
+	  linux-media mailinglist.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-rtrack2.
+
+config RADIO_RTRACK2_PORT
+	hex "RadioTrack II i/o port (0x20c or 0x30c)"
+	depends on RADIO_RTRACK2=y
+	default "30c"
+	help
+	  Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
+	  haven't changed the jumper setting on the card.
+
+config RADIO_RTRACK_PORT
+	hex "RadioTrack i/o port (0x20f or 0x30f)"
+	depends on RADIO_RTRACK=y
+	default "30f"
+	help
+	  Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
+	  haven't changed the jumper setting on the card.
+
+config RADIO_SF16FMI
+	tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	help
+	  Choose Y here if you have one of these FM radio cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-sf16fmi.
+
+config RADIO_SF16FMR2
+	tristate "SF16-FMR2/SF16-FMD2 Radio"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_TEA575X
+	help
+	  Choose Y here if you have one of these FM radio cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-sf16fmr2.
+
+config RADIO_TERRATEC
+	tristate "TerraTec ActiveRadio ISA Standalone"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have this FM radio card.
+
+	  Note: this driver hasn't been tested since a long time due to lack
+	  of hardware. If you have this hardware, then please contact the
+	  linux-media mailinglist.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-terratec.
+
+config RADIO_TRUST
+	tristate "Trust FM radio card"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  This is a driver for the Trust FM radio cards. Say Y if you have
+	  such a card and want to use it under Linux.
+
+	  Note: this driver hasn't been tested since a long time due to lack
+	  of hardware. If you have this hardware, then please contact the
+	  linux-media mailinglist.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-trust.
+
+config RADIO_TRUST_PORT
+	hex "Trust i/o port (usually 0x350 or 0x358)"
+	depends on RADIO_TRUST=y
+	default "350"
+	help
+	  Enter the I/O port of your Trust FM radio card. If unsure, try the
+	  values "0x350" or "0x358".
+
+config RADIO_TYPHOON
+	tristate "Typhoon Radio (a.k.a. EcoRadio)"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have one of these FM radio cards, and then fill
+	  in the port address and the frequency used for muting below.
+
+	  Note: this driver hasn't been tested since a long time due to lack
+	  of hardware. If you have this hardware, then please contact the
+	  linux-media mailinglist.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-typhoon.
+
+config RADIO_TYPHOON_MUTEFREQ
+	int "Typhoon frequency set when muting the device (kHz)"
+	depends on RADIO_TYPHOON=y
+	default "87500"
+	help
+	  Enter the frequency used for muting the radio. The device is never
+	  completely silent. If the volume is just turned down, you can still
+	  hear silent voices and music. For that reason, the frequency of the
+	  radio device is set to the frequency you can enter here whenever
+	  the device is muted. There should be no local radio station at that
+	  frequency.
+
+config RADIO_TYPHOON_PORT
+	hex "Typhoon I/O port (0x316 or 0x336)"
+	depends on RADIO_TYPHOON=y
+	default "316"
+	help
+	  Enter the I/O port of your Typhoon or EcoRadio radio card.
+
+config RADIO_ZOLTRIX
+	tristate "Zoltrix Radio"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have one of these FM radio cards, and then fill
+	  in the port address below.
+
+	  Note: this driver hasn't been tested since a long time due to lack
+	  of hardware. If you have this hardware, then please contact the
+	  linux-media mailinglist.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-zoltrix.
+
+config RADIO_ZOLTRIX_PORT
+	hex "ZOLTRIX I/O port (0x20c or 0x30c)"
+	depends on RADIO_ZOLTRIX=y
+	default "20c"
+	help
+	  Enter the I/O port of your Zoltrix radio card.
+
+endif # V4L_RADIO_ISA_DRIVERS
+
+endif # RADIO_ADAPTERS