Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 417 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
new file mode 100644
index 0000000000..288c15a7d7
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
@@ -0,0 +1,417 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * DVB USB framework
+ *
+ * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@posteo.de>
+ * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
+ */
+
+#ifndef DVB_USB_H
+#define DVB_USB_H
+
+#include <linux/usb/input.h>
+#include <linux/firmware.h>
+#include <media/rc-core.h>
+#include <media/media-device.h>
+
+#include <media/dvb_frontend.h>
+#include <media/dvb_demux.h>
+#include <media/dvb_net.h>
+#include <media/dmxdev.h>
+#include <media/dvb-usb-ids.h>
+
+/*
+ * device file: /dev/dvb/adapter[0-1]/frontend[0-2]
+ *
+ * |-- device
+ * |   |-- adapter0
+ * |   |   |-- frontend0
+ * |   |   |-- frontend1
+ * |   |   `-- frontend2
+ * |   `-- adapter1
+ * |       |-- frontend0
+ * |       |-- frontend1
+ * |       `-- frontend2
+ *
+ *
+ * Commonly used variable names:
+ * d = pointer to device (struct dvb_usb_device *)
+ * adap = pointer to adapter (struct dvb_usb_adapter *)
+ * fe = pointer to frontend (struct dvb_frontend *)
+ *
+ * Use macros defined in that file to resolve needed pointers.
+ */
+
+/* helper macros for every DVB USB driver use */
+#define adap_to_d(adap) (container_of(adap, struct dvb_usb_device, \
+		adapter[adap->id]))
+#define adap_to_priv(adap) (adap_to_d(adap)->priv)
+#define fe_to_adap(fe) ((struct dvb_usb_adapter *) ((fe)->dvb->priv))
+#define fe_to_d(fe) (adap_to_d(fe_to_adap(fe)))
+#define fe_to_priv(fe) (fe_to_d(fe)->priv)
+#define d_to_priv(d) (d->priv)
+
+#define dvb_usb_dbg_usb_control_msg(udev, r, t, v, i, b, l) { \
+	char *direction; \
+	if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
+		direction = ">>>"; \
+	else \
+		direction = "<<<"; \
+	dev_dbg(&udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \
+			"%s %*ph\n",  __func__, t, r, v & 0xff, v >> 8, \
+			i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l, b); \
+}
+
+#define DVB_USB_STREAM_BULK(endpoint_, count_, size_) { \
+	.type = USB_BULK, \
+	.count = count_, \
+	.endpoint = endpoint_, \
+	.u = { \
+		.bulk = { \
+			.buffersize = size_, \
+		} \
+	} \
+}
+
+#define DVB_USB_STREAM_ISOC(endpoint_, count_, frames_, size_, interval_) { \
+	.type = USB_ISOC, \
+	.count = count_, \
+	.endpoint = endpoint_, \
+	.u = { \
+		.isoc = { \
+			.framesperurb = frames_, \
+			.framesize = size_,\
+			.interval = interval_, \
+		} \
+	} \
+}
+
+#define DVB_USB_DEVICE(vend, prod, props_, name_, rc) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
+	.idVendor = (vend), \
+	.idProduct = (prod), \
+	.driver_info = (kernel_ulong_t) &((const struct dvb_usb_driver_info) { \
+		.props = (props_), \
+		.name = (name_), \
+		.rc_map = (rc), \
+	})
+
+struct dvb_usb_device;
+struct dvb_usb_adapter;
+
+/**
+ * struct dvb_usb_driver_info - structure for carrying all needed data from the
+ *	device driver to the general
+ * dvb usb routines
+ * @name: device name
+ * @rc_map: name of rc codes table
+ * @props: structure containing all device properties
+ */
+struct dvb_usb_driver_info {
+	const char *name;
+	const char *rc_map;
+	const struct dvb_usb_device_properties *props;
+};
+
+/**
+ * struct dvb_usb_rc - structure for remote controller configuration
+ * @map_name: name of rc codes table
+ * @allowed_protos: protocol(s) supported by the driver
+ * @change_protocol: callback to change protocol
+ * @query: called to query an event from the device
+ * @interval: time in ms between two queries
+ * @driver_type: used to point if a device supports raw mode
+ * @bulk_mode: device supports bulk mode for rc (disable polling mode)
+ * @timeout: set to length of last space before raw IR goes idle
+ */
+struct dvb_usb_rc {
+	const char *map_name;
+	u64 allowed_protos;
+	int (*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
+	int (*query) (struct dvb_usb_device *d);
+	unsigned int interval;
+	enum rc_driver_type driver_type;
+	bool bulk_mode;
+	int timeout;
+};
+
+/**
+ * struct usb_data_stream_properties - usb streaming configuration for adapter
+ * @type: urb type
+ * @count: count of used urbs
+ * @endpoint: stream usb endpoint number
+ * @u: union for @bulk and @isoc
+ */
+struct usb_data_stream_properties {
+#define USB_BULK  1
+#define USB_ISOC  2
+	u8 type;
+	u8 count;
+	u8 endpoint;
+
+	union {
+		struct {
+			unsigned int buffersize; /* per URB */
+		} bulk;
+		struct {
+			int framesperurb;
+			int framesize;
+			int interval;
+		} isoc;
+	} u;
+};
+
+/**
+ * struct dvb_usb_adapter_properties - properties of dvb usb device adapter
+ * @caps: adapter capabilities
+ * @pid_filter_count: pid count of adapter pid-filter
+ * @pid_filter_ctrl: called to enable/disable pid-filter
+ * @pid_filter: called to set/unset pid for filtering
+ * @stream: adapter usb stream configuration
+ */
+struct dvb_usb_adapter_properties {
+#define MAX_NO_OF_FE_PER_ADAP 3
+#define DVB_USB_ADAP_HAS_PID_FILTER               0x01
+#define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02
+#define DVB_USB_ADAP_NEED_PID_FILTERING           0x04
+	u8 caps;
+
+	u8 pid_filter_count;
+	int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int);
+	int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int);
+
+	struct usb_data_stream_properties stream;
+};
+
+/**
+ * struct dvb_usb_device_properties - properties of a dvb-usb-device
+ * @driver_name: name of the owning driver module
+ * @owner: owner of the dvb_adapter
+ * @adapter_nr: values from the DVB_DEFINE_MOD_OPT_ADAPTER_NR() macro
+ * @bInterfaceNumber: usb interface number driver binds
+ * @size_of_priv: bytes allocated for the driver private data
+ * @generic_bulk_ctrl_endpoint: bulk control endpoint number for sent
+ * @generic_bulk_ctrl_endpoint_response: bulk control endpoint number for
+ *  receive
+ * @generic_bulk_ctrl_delay: delay between bulk control sent and receive message
+ * @probe: like probe on driver model
+ * @disconnect: like disconnect on driver model
+ * @identify_state: called to determine the firmware state (cold or warm) and
+ *  return possible firmware file name to be loaded
+ * @firmware: name of the firmware file to be loaded
+ * @download_firmware: called to download the firmware
+ * @i2c_algo: i2c_algorithm if the device has i2c-adapter
+ * @num_adapters: dvb usb device adapter count
+ * @get_adapter_count: called to resolve adapter count
+ * @adapter: array of all adapter properties of device
+ * @power_ctrl: called to enable/disable power of the device
+ * @read_config: called to resolve device configuration
+ * @read_mac_address: called to resolve adapter mac-address
+ * @frontend_attach: called to attach the possible frontends
+ * @frontend_detach: called to detach the possible frontends
+ * @tuner_attach: called to attach the possible tuners
+ * @tuner_detach: called to detach the possible tuners
+ * @frontend_ctrl: called to power on/off active frontend
+ * @streaming_ctrl: called to start/stop the usb streaming of adapter
+ * @init: called after adapters are created in order to finalize device
+ *  configuration
+ * @exit: called when driver is unloaded
+ * @get_rc_config: called to resolve used remote controller configuration
+ * @get_stream_config: called to resolve input and output stream configuration
+ *  of the adapter just before streaming is started. input stream is transport
+ *  stream from the demodulator and output stream is usb stream to host.
+ */
+struct dvb_usb_device_properties {
+#define MAX_NO_OF_ADAPTER_PER_DEVICE 2
+	const char *driver_name;
+	struct module *owner;
+	short *adapter_nr;
+
+	u8 bInterfaceNumber;
+	unsigned int size_of_priv;
+	u8 generic_bulk_ctrl_endpoint;
+	u8 generic_bulk_ctrl_endpoint_response;
+	unsigned int generic_bulk_ctrl_delay;
+
+	int (*probe)(struct dvb_usb_device *);
+	void (*disconnect)(struct dvb_usb_device *);
+#define WARM                  0
+#define COLD                  1
+	int (*identify_state) (struct dvb_usb_device *, const char **);
+	const char *firmware;
+#define RECONNECTS_USB        1
+	int (*download_firmware) (struct dvb_usb_device *,
+			const struct firmware *);
+
+	struct i2c_algorithm *i2c_algo;
+
+	unsigned int num_adapters;
+	int (*get_adapter_count) (struct dvb_usb_device *);
+	struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
+	int (*power_ctrl) (struct dvb_usb_device *, int);
+	int (*read_config) (struct dvb_usb_device *d);
+	int (*read_mac_address) (struct dvb_usb_adapter *, u8 []);
+	int (*frontend_attach) (struct dvb_usb_adapter *);
+	int (*frontend_detach)(struct dvb_usb_adapter *);
+	int (*tuner_attach) (struct dvb_usb_adapter *);
+	int (*tuner_detach)(struct dvb_usb_adapter *);
+	int (*frontend_ctrl) (struct dvb_frontend *, int);
+	int (*streaming_ctrl) (struct dvb_frontend *, int);
+	int (*init) (struct dvb_usb_device *);
+	void (*exit) (struct dvb_usb_device *);
+	int (*get_rc_config) (struct dvb_usb_device *, struct dvb_usb_rc *);
+#define DVB_USB_FE_TS_TYPE_188        0
+#define DVB_USB_FE_TS_TYPE_204        1
+#define DVB_USB_FE_TS_TYPE_RAW        2
+	int (*get_stream_config) (struct dvb_frontend *,  u8 *,
+			struct usb_data_stream_properties *);
+};
+
+/**
+ * struct usb_data_stream - generic object of an usb stream
+ * @udev: USB device
+ * @props: properties
+ * @state: state of the data stream
+ * @complete: complete callback
+ * @urb_list: list of URBs
+ * @buf_num: number of buffer allocated
+ * @buf_size: size of each buffer in buf_list
+ * @buf_list: array containing all allocate buffers for streaming
+ * @dma_addr: list of dma_addr_t for each buffer in buf_list
+ *
+ * @urbs_initialized: number of URBs initialized
+ * @urbs_submitted: number of URBs submitted
+ * @user_priv: private pointer
+ */
+struct usb_data_stream {
+#define MAX_NO_URBS_FOR_DATA_STREAM 10
+	struct usb_device *udev;
+	struct usb_data_stream_properties props;
+
+#define USB_STATE_INIT    0x00
+#define USB_STATE_URB_BUF 0x01
+	u8 state;
+
+	void (*complete) (struct usb_data_stream *, u8 *, size_t);
+
+	struct urb    *urb_list[MAX_NO_URBS_FOR_DATA_STREAM];
+	int            buf_num;
+	unsigned long  buf_size;
+	u8            *buf_list[MAX_NO_URBS_FOR_DATA_STREAM];
+	dma_addr_t     dma_addr[MAX_NO_URBS_FOR_DATA_STREAM];
+
+	int urbs_initialized;
+	int urbs_submitted;
+
+	void *user_priv;
+};
+
+/**
+ * struct dvb_usb_adapter - dvb adapter object on dvb usb device
+ * @props: pointer to adapter properties
+ * @stream: adapter the usb data stream
+ * @id: index of this adapter (starting with 0)
+ * @ts_type: transport stream, input stream, type
+ * @suspend_resume_active: set when there is ongoing suspend / resume
+ * @pid_filtering: is hardware pid_filtering used or not
+ * @feed_count: current feed count
+ * @max_feed_count: maimum feed count device can handle
+ * @active_fe: active frontend
+ * @state_bits: status bits
+ * @dvb_adap: adapter dvb_adapter
+ * @dmxdev: adapter dmxdev
+ * @demux: adapter software demuxer
+ * @dvb_net: adapter dvb_net interfaces
+ * @fe: adapter frontends
+ * @fe_init: rerouted frontend-init function
+ * @fe_sleep: rerouted frontend-sleep function
+ */
+struct dvb_usb_adapter {
+	const struct dvb_usb_adapter_properties *props;
+	struct usb_data_stream stream;
+	u8 id;
+	u8 ts_type;
+	bool suspend_resume_active;
+	bool pid_filtering;
+	u8 feed_count;
+	u8 max_feed_count;
+	s8 active_fe;
+#define ADAP_INIT                0
+#define ADAP_SLEEP               1
+#define ADAP_STREAMING           2
+	unsigned long state_bits;
+
+	/* dvb */
+	struct dvb_adapter   dvb_adap;
+	struct dmxdev        dmxdev;
+	struct dvb_demux     demux;
+	struct dvb_net       dvb_net;
+
+	struct dvb_frontend *fe[MAX_NO_OF_FE_PER_ADAP];
+	int (*fe_init[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *);
+	int (*fe_sleep[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *);
+};
+
+/**
+ * struct dvb_usb_device - dvb usb device object
+ * @props: device properties
+ * @name: device name
+ * @rc_map: name of rc codes table
+ * @rc_polling_active: set when RC polling is active
+ * @intf: pointer to the device's struct usb_interface
+ * @udev: pointer to the device's struct usb_device
+ * @rc: remote controller configuration
+ * @powered: indicated whether the device is power or not
+ * @usb_mutex: mutex for usb control messages
+ * @i2c_mutex: mutex for i2c-transfers
+ * @i2c_adap: device's i2c-adapter
+ * @adapter: adapters
+ * @rc_dev: rc device for the remote control
+ * @rc_phys: rc path
+ * @rc_query_work: work for polling remote
+ * @priv: private data of the actual driver (allocate by dvb usb, size defined
+ *  in size_of_priv of dvb_usb_properties).
+ */
+struct dvb_usb_device {
+	const struct dvb_usb_device_properties *props;
+	const char *name;
+	const char *rc_map;
+	bool rc_polling_active;
+	struct usb_interface *intf;
+	struct usb_device *udev;
+	struct dvb_usb_rc rc;
+	int powered;
+
+	/* locking */
+	struct mutex usb_mutex;
+
+	/* i2c */
+	struct mutex i2c_mutex;
+	struct i2c_adapter i2c_adap;
+
+	struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
+
+	/* remote control */
+	struct rc_dev *rc_dev;
+	char rc_phys[64];
+	struct delayed_work rc_query_work;
+
+	void *priv;
+};
+
+extern int dvb_usbv2_probe(struct usb_interface *,
+		const struct usb_device_id *);
+extern void dvb_usbv2_disconnect(struct usb_interface *);
+extern int dvb_usbv2_suspend(struct usb_interface *, pm_message_t);
+extern int dvb_usbv2_resume(struct usb_interface *);
+extern int dvb_usbv2_reset_resume(struct usb_interface *);
+
+/* the generic read/write method for device control */
+extern int dvb_usbv2_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16);
+extern int dvb_usbv2_generic_write(struct dvb_usb_device *, u8 *, u16);
+/* caller must hold lock when locked versions are called */
+extern int dvb_usbv2_generic_rw_locked(struct dvb_usb_device *,
+		u8 *, u16, u8 *, u16);
+extern int dvb_usbv2_generic_write_locked(struct dvb_usb_device *, u8 *, u16);
+
+#endif