Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 5236 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c
new file mode 100644
index 0000000000..3af594134a
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/dib0700_devices.c
@@ -0,0 +1,5236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
+ *
+ *  Copyright (C) 2005-9 DiBcom, SA et al
+ */
+#include "dib0700.h"
+
+#include "dib3000mc.h"
+#include "dib7000m.h"
+#include "dib7000p.h"
+#include "dib8000.h"
+#include "dib9000.h"
+#include "mt2060.h"
+#include "mt2266.h"
+#include "xc2028.h"
+#include "xc5000.h"
+#include "xc4000.h"
+#include "s5h1411.h"
+#include "dib0070.h"
+#include "dib0090.h"
+#include "lgdt3305.h"
+#include "mxl5007t.h"
+#include "mn88472.h"
+#include "tda18250.h"
+
+
+static int force_lna_activation;
+module_param(force_lna_activation, int, 0644);
+MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifier(s) (LNA), if applicable for the device (default: 0=automatic/off).");
+
+struct dib0700_adapter_state {
+	int (*set_param_save) (struct dvb_frontend *);
+	const struct firmware *frontend_firmware;
+	struct dib7000p_ops dib7000p_ops;
+	struct dib8000_ops dib8000_ops;
+};
+
+/* Hauppauge Nova-T 500 (aka Bristol)
+ *  has a LNA on GPIO0 which is enabled by setting 1 */
+static struct mt2060_config bristol_mt2060_config[2] = {
+	{
+		.i2c_address = 0x60,
+		.clock_out   = 3,
+	}, {
+		.i2c_address = 0x61,
+	}
+};
+
+
+static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
+	.band_caps = BAND_VHF | BAND_UHF,
+	.setup     = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
+
+	.agc1_max = 42598,
+	.agc1_min = 17694,
+	.agc2_max = 45875,
+	.agc2_min = 0,
+
+	.agc1_pt1 = 0,
+	.agc1_pt2 = 59,
+
+	.agc1_slope1 = 0,
+	.agc1_slope2 = 69,
+
+	.agc2_pt1 = 0,
+	.agc2_pt2 = 59,
+
+	.agc2_slope1 = 111,
+	.agc2_slope2 = 28,
+};
+
+static struct dib3000mc_config bristol_dib3000mc_config[2] = {
+	{	.agc          = &bristol_dib3000p_mt2060_agc_config,
+		.max_time     = 0x196,
+		.ln_adc_level = 0x1cc7,
+		.output_mpeg2_in_188_bytes = 1,
+	},
+	{	.agc          = &bristol_dib3000p_mt2060_agc_config,
+		.max_time     = 0x196,
+		.ln_adc_level = 0x1cc7,
+		.output_mpeg2_in_188_bytes = 1,
+	}
+};
+
+static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+	if (adap->id == 0) {
+		dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1); msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
+
+		if (force_lna_activation)
+			dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+		else
+			dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
+
+		if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
+			dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
+			return -ENODEV;
+		}
+	}
+	st->mt2060_if1[adap->id] = 1220;
+	return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
+		(10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
+}
+
+static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
+{
+	struct i2c_msg msg[2] = {
+		{ .addr = 0x50, .flags = 0,        .buf = &adrs, .len = 1 },
+		{ .addr = 0x50, .flags = I2C_M_RD, .buf = pval,  .len = 1 },
+	};
+	if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
+	return 0;
+}
+
+static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
+	struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
+	s8 a;
+	int if1=1220;
+	if (adap->dev->udev->descriptor.idVendor  == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+		adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
+		if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
+	}
+	return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c,
+			  &bristol_mt2060_config[adap->id], if1) == NULL ?
+			  -ENODEV : 0;
+}
+
+/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
+
+/* MT226x */
+static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
+	{
+		BAND_UHF,
+
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
+		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
+	    | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+		1130,
+		21,
+
+		0,
+		118,
+
+		0,
+		3530,
+		1,
+		0,
+
+		65535,
+		33770,
+		65535,
+		23592,
+
+		0,
+		62,
+		255,
+		64,
+		64,
+		132,
+		192,
+		80,
+		80,
+
+		17,
+		27,
+		23,
+		51,
+
+		1,
+	}, {
+		BAND_VHF | BAND_LBAND,
+
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
+		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
+	    | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+
+		2372,
+		21,
+
+		0,
+		118,
+
+		0,
+		3530,
+		1,
+		0,
+
+		65535,
+		0,
+		65535,
+		23592,
+
+		0,
+		128,
+		128,
+		128,
+		0,
+		128,
+		253,
+		81,
+		0,
+
+		17,
+		27,
+		23,
+		51,
+
+		1,
+	}
+};
+
+static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
+	.internal = 60000,
+	.sampling = 30000,
+	.pll_prediv = 1,
+	.pll_ratio = 8,
+	.pll_range = 3,
+	.pll_reset = 1,
+	.pll_bypass = 0,
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 1,
+	.ADClkSrc = 1,
+	.modulo = 2,
+	.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+	.ifreq = 0,
+	.timf = 20452225,
+};
+
+static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
+	{	.output_mpeg2_in_188_bytes = 1,
+		.hostbus_diversity = 1,
+		.tuner_is_baseband = 1,
+
+		.agc_config_count = 2,
+		.agc = stk7700d_7000p_mt2266_agc_config,
+		.bw  = &stk7700d_mt2266_pll_config,
+
+		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+	},
+	{	.output_mpeg2_in_188_bytes = 1,
+		.hostbus_diversity = 1,
+		.tuner_is_baseband = 1,
+
+		.agc_config_count = 2,
+		.agc = stk7700d_7000p_mt2266_agc_config,
+		.bw  = &stk7700d_mt2266_pll_config,
+
+		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+	}
+};
+
+static struct mt2266_config stk7700d_mt2266_config[2] = {
+	{	.i2c_address = 0x60
+	},
+	{	.i2c_address = 0x60
+	}
+};
+
+static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	if (adap->id == 0) {
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+		msleep(10);
+		if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+					     stk7700d_dib7000p_mt2266_config)
+		    != 0) {
+			err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n", __func__);
+			dvb_detach(state->dib7000p_ops.set_wbd_ref);
+			return -ENODEV;
+		}
+	}
+
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
+			   0x80 + (adap->id << 1),
+			   &stk7700d_dib7000p_mt2266_config[adap->id]);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	if (adap->id == 0) {
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+		if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
+					     stk7700d_dib7000p_mt2266_config)
+		    != 0) {
+			err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n", __func__);
+			dvb_detach(state->dib7000p_ops.set_wbd_ref);
+			return -ENODEV;
+		}
+	}
+
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
+			   0x80 + (adap->id << 1),
+			   &stk7700d_dib7000p_mt2266_config[adap->id]);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *tun_i2c;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
+					    DIBX000_I2C_INTERFACE_TUNER, 1);
+	return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c,
+		&stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
+}
+
+/* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
+static struct dibx000_agc_config xc3028_agc_config = {
+	.band_caps = BAND_VHF | BAND_UHF,
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+	.setup = (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+	.inv_gain = 712,
+	.time_stabiliz = 21,
+	.alpha_level = 0,
+	.thlock = 118,
+	.wbd_inv = 0,
+	.wbd_ref = 2867,
+	.wbd_sel = 0,
+	.wbd_alpha = 2,
+	.agc1_max = 0,
+	.agc1_min = 0,
+	.agc2_max = 39718,
+	.agc2_min = 9930,
+	.agc1_pt1 = 0,
+	.agc1_pt2 = 0,
+	.agc1_pt3 = 0,
+	.agc1_slope1 = 0,
+	.agc1_slope2 = 0,
+	.agc2_pt1 = 0,
+	.agc2_pt2 = 128,
+	.agc2_slope1 = 29,
+	.agc2_slope2 = 29,
+	.alpha_mant = 17,
+	.alpha_exp = 27,
+	.beta_mant = 23,
+	.beta_exp = 51,
+	.perform_agc_softsplit = 1,
+};
+
+/* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
+static struct dibx000_bandwidth_config xc3028_bw_config = {
+	.internal = 60000,
+	.sampling = 30000,
+	.pll_prediv = 1,
+	.pll_ratio = 8,
+	.pll_range = 3,
+	.pll_reset = 1,
+	.pll_bypass = 0,
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 1,
+	.ADClkSrc = 1,
+	.modulo = 0,
+	.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
+	.ifreq = (1 << 25) | 5816102,  /* ifreq = 5.200000 MHz */
+	.timf = 20452225,
+	.xtal_hz = 30000000,
+};
+
+static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
+	.output_mpeg2_in_188_bytes = 1,
+	.tuner_is_baseband = 1,
+
+	.agc_config_count = 1,
+	.agc = &xc3028_agc_config,
+	.bw  = &xc3028_bw_config,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+};
+
+static int stk7700ph_xc3028_callback(void *ptr, int component,
+				     int command, int arg)
+{
+	struct dvb_usb_adapter *adap = ptr;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	switch (command) {
+	case XC2028_TUNER_RESET:
+		/* Send the tuner in then out of reset */
+		state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
+		msleep(10);
+		state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+		break;
+	case XC2028_RESET_CLK:
+	case XC2028_I2C_FLUSH:
+		break;
+	default:
+		err("%s: unknown command %d, arg %d\n", __func__,
+			command, arg);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
+	.fname = XC2028_DEFAULT_FIRMWARE,
+	.max_len = 64,
+	.demod = XC3028_FE_DIBCOM52,
+};
+
+static struct xc2028_config stk7700ph_xc3028_config = {
+	.i2c_addr = 0x61,
+	.ctrl = &stk7700ph_xc3028_ctrl,
+};
+
+static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	if (desc->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
+	    desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	else
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+	msleep(10);
+
+	if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				     &stk7700ph_dib7700_xc3028_config) != 0) {
+		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
+		    __func__);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
+		&stk7700ph_dib7700_xc3028_config);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *tun_i2c;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
+		DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	stk7700ph_xc3028_config.i2c_adap = tun_i2c;
+
+	/* FIXME: generalize & move to common area */
+	adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback;
+
+	return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config)
+		== NULL ? -ENODEV : 0;
+}
+
+#define DEFAULT_RC_INTERVAL 50
+
+/*
+ * This function is used only when firmware is < 1.20 version. Newer
+ * firmwares use bulk mode, with functions implemented at dib0700_core,
+ * at dib0700_rc_urb_completion()
+ */
+static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
+{
+	enum rc_proto protocol;
+	u32 scancode;
+	u8 toggle;
+	int i;
+	struct dib0700_state *st = d->priv;
+
+	if (st->fw_version >= 0x10200) {
+		/* For 1.20 firmware , We need to keep the RC polling
+		   callback so we can reuse the input device setup in
+		   dvb-usb-remote.c.  However, the actual work is being done
+		   in the bulk URB completion handler. */
+		return 0;
+	}
+
+	st->buf[0] = REQUEST_POLL_RC;
+	st->buf[1] = 0;
+
+	i = dib0700_ctrl_rd(d, st->buf, 2, st->buf, 4);
+	if (i <= 0) {
+		err("RC Query Failed");
+		return -EIO;
+	}
+
+	/* losing half of KEY_0 events from Philipps rc5 remotes.. */
+	if (st->buf[0] == 0 && st->buf[1] == 0
+	    && st->buf[2] == 0 && st->buf[3] == 0)
+		return 0;
+
+	/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)st->buf[3 - 2],(int)st->buf[3 - 3],(int)st->buf[3 - 1],(int)st->buf[3]);  */
+
+	dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */
+
+	switch (d->props.rc.core.protocol) {
+	case RC_PROTO_BIT_NEC:
+		/* NEC protocol sends repeat code as 0 0 0 FF */
+		if ((st->buf[3 - 2] == 0x00) && (st->buf[3 - 3] == 0x00) &&
+		    (st->buf[3] == 0xff)) {
+			rc_repeat(d->rc_dev);
+			return 0;
+		}
+
+		protocol = RC_PROTO_NEC;
+		scancode = RC_SCANCODE_NEC(st->buf[3 - 2], st->buf[3 - 3]);
+		toggle = 0;
+		break;
+
+	default:
+		/* RC-5 protocol changes toggle bit on new keypress */
+		protocol = RC_PROTO_RC5;
+		scancode = RC_SCANCODE_RC5(st->buf[3 - 2], st->buf[3 - 3]);
+		toggle = st->buf[3 - 1];
+		break;
+	}
+
+	rc_keydown(d->rc_dev, protocol, scancode, toggle);
+	return 0;
+}
+
+/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
+static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
+	BAND_UHF | BAND_VHF,
+
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+
+	712,
+	41,
+
+	0,
+	118,
+
+	0,
+	4095,
+	0,
+	0,
+
+	42598,
+	17694,
+	45875,
+	2621,
+	0,
+	76,
+	139,
+	52,
+	59,
+	107,
+	172,
+	57,
+	70,
+
+	21,
+	25,
+	28,
+	48,
+
+	1,
+	{  0,
+	   107,
+	   51800,
+	   24700
+	},
+};
+
+static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
+	.band_caps = BAND_UHF | BAND_VHF,
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+	.setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+	.inv_gain = 712,
+	.time_stabiliz = 41,
+	.alpha_level = 0,
+	.thlock = 118,
+	.wbd_inv = 0,
+	.wbd_ref = 4095,
+	.wbd_sel = 0,
+	.wbd_alpha = 0,
+	.agc1_max = 42598,
+	.agc1_min = 16384,
+	.agc2_max = 42598,
+	.agc2_min = 0,
+	.agc1_pt1 = 0,
+	.agc1_pt2 = 137,
+	.agc1_pt3 = 255,
+	.agc1_slope1 = 0,
+	.agc1_slope2 = 255,
+	.agc2_pt1 = 0,
+	.agc2_pt2 = 0,
+	.agc2_slope1 = 0,
+	.agc2_slope2 = 41,
+	.alpha_mant = 15,
+	.alpha_exp = 25,
+	.beta_mant = 28,
+	.beta_exp = 48,
+	.perform_agc_softsplit = 0,
+};
+
+static struct dibx000_bandwidth_config stk7700p_pll_config = {
+	.internal = 60000,
+	.sampling = 30000,
+	.pll_prediv = 1,
+	.pll_ratio = 8,
+	.pll_range = 3,
+	.pll_reset = 1,
+	.pll_bypass = 0,
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 1,
+	.ADClkSrc = 1,
+	.modulo = 0,
+	.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+	.ifreq = 60258167,
+	.timf = 20452225,
+	.xtal_hz = 30000000,
+};
+
+static struct dib7000m_config stk7700p_dib7000m_config = {
+	.dvbt_mode = 1,
+	.output_mpeg2_in_188_bytes = 1,
+	.quartz_direct = 1,
+
+	.agc_config_count = 1,
+	.agc = &stk7700p_7000m_mt2060_agc_config,
+	.bw  = &stk7700p_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+static struct dib7000p_config stk7700p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &stk7700p_7000p_mt2060_agc_config,
+	.bw  = &stk7700p_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	/* unless there is no real power management in DVB - we leave the device on GPIO6 */
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(50);
+
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1); msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9,  GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
+
+	dib0700_set_gpio(adap->dev,  GPIO0, GPIO_OUT, 1);
+
+	st->mt2060_if1[0] = 1220;
+
+	if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap)) {
+		adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
+		st->is_dib7000pc = 1;
+	} else {
+		memset(&state->dib7000p_ops, 0, sizeof(state->dib7000p_ops));
+		adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
+	}
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static struct mt2060_config stk7700p_mt2060_config = {
+	0x60
+};
+
+static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
+	struct dib0700_state *st = adap->dev->priv;
+	struct i2c_adapter *tun_i2c;
+	struct dib0700_adapter_state *state = adap->priv;
+	s8 a;
+	int if1=1220;
+
+	if (adap->dev->udev->descriptor.idVendor  == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+		adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
+		if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
+	}
+	if (st->is_dib7000pc)
+		tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+	else
+		tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config,
+		if1) == NULL ? -ENODEV : 0;
+}
+
+/* DIB7070 generic */
+static struct dibx000_agc_config dib7070_agc_config = {
+	.band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+	.setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+	.inv_gain = 600,
+	.time_stabiliz = 10,
+	.alpha_level = 0,
+	.thlock = 118,
+	.wbd_inv = 0,
+	.wbd_ref = 3530,
+	.wbd_sel = 1,
+	.wbd_alpha = 5,
+	.agc1_max = 65535,
+	.agc1_min = 0,
+	.agc2_max = 65535,
+	.agc2_min = 0,
+	.agc1_pt1 = 0,
+	.agc1_pt2 = 40,
+	.agc1_pt3 = 183,
+	.agc1_slope1 = 206,
+	.agc1_slope2 = 255,
+	.agc2_pt1 = 72,
+	.agc2_pt2 = 152,
+	.agc2_slope1 = 88,
+	.agc2_slope2 = 90,
+	.alpha_mant = 17,
+	.alpha_exp = 27,
+	.beta_mant = 23,
+	.beta_exp = 51,
+	.perform_agc_softsplit = 0,
+};
+
+static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	deb_info("reset: %d", onoff);
+	return state->dib7000p_ops.set_gpio(fe, 8, 0, !onoff);
+}
+
+static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	deb_info("sleep: %d", onoff);
+	return state->dib7000p_ops.set_gpio(fe, 9, 0, onoff);
+}
+
+static struct dib0070_config dib7070p_dib0070_config[2] = {
+	{
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib7070_tuner_reset,
+		.sleep = dib7070_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 4,
+		.charge_pump = 2,
+	}, {
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib7070_tuner_reset,
+		.sleep = dib7070_tuner_sleep,
+		.clock_khz = 12000,
+		.charge_pump = 2,
+	}
+};
+
+static struct dib0070_config dib7770p_dib0070_config = {
+	 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+	 .reset = dib7070_tuner_reset,
+	 .sleep = dib7070_tuner_sleep,
+	 .clock_khz = 12000,
+	 .clock_pad_drive = 0,
+	 .flip_chip = 1,
+	 .charge_pump = 2,
+};
+
+static int dib7070_set_param_override(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	u16 offset;
+	u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
+	switch (band) {
+		case BAND_VHF: offset = 950; break;
+		case BAND_UHF:
+		default: offset = 550; break;
+	}
+	deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
+	state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+	return state->set_param_save(fe);
+}
+
+static int dib7770_set_param_override(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	u16 offset;
+	u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
+	switch (band) {
+	case BAND_VHF:
+		state->dib7000p_ops.set_gpio(fe, 0, 0, 1);
+		offset = 850;
+		break;
+	case BAND_UHF:
+	default:
+		state->dib7000p_ops.set_gpio(fe, 0, 0, 0);
+		offset = 250;
+		break;
+	}
+	deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
+	state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+	return state->set_param_save(fe);
+}
+
+static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
+			 DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
+		       &dib7770p_dib0070_config) == NULL)
+		return -ENODEV;
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override;
+	return 0;
+}
+
+static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	if (adap->id == 0) {
+		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
+			return -ENODEV;
+	} else {
+		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
+			return -ENODEV;
+	}
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
+	return 0;
+}
+
+static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index,
+		u16 pid, int onoff)
+{
+	struct dib0700_adapter_state *state = adapter->priv;
+	struct dib0700_state *st = adapter->dev->priv;
+
+	if (st->is_dib7000pc)
+		return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+	return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+	struct dib0700_state *st = adapter->dev->priv;
+	struct dib0700_adapter_state *state = adapter->priv;
+	if (st->is_dib7000pc)
+		return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+	return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
+{
+	struct dib0700_adapter_state *state = adapter->priv;
+	return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+	struct dib0700_adapter_state *state = adapter->priv;
+	return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
+	.internal = 60000,
+	.sampling = 15000,
+	.pll_prediv = 1,
+	.pll_ratio = 20,
+	.pll_range = 3,
+	.pll_reset = 1,
+	.pll_bypass = 0,
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 1,
+	.ADClkSrc = 1,
+	.modulo = 2,
+	.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+	.ifreq = (0 << 25) | 0,
+	.timf = 20452225,
+	.xtal_hz = 12000000,
+};
+
+static struct dib7000p_config dib7070p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &dib7070_agc_config,
+	.bw  = &dib7070_bw_config_12_mhz,
+	.tuner_is_baseband = 1,
+	.spur_protect = 1,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+};
+
+/* STK7070P */
+static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
+	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	else
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				     &dib7070p_dib7000p_config) != 0) {
+		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
+		    __func__);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
+		&dib7070p_dib7000p_config);
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+/* STK7770P */
+static struct dib7000p_config dib7770p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &dib7070_agc_config,
+	.bw  = &dib7070_bw_config_12_mhz,
+	.tuner_is_baseband = 1,
+	.spur_protect = 1,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+	.enable_current_mirror = 1,
+	.disable_sample_and_hold = 0,
+};
+
+static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
+	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	else
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				     &dib7770p_dib7000p_config) != 0) {
+		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
+		    __func__);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
+		&dib7770p_dib7000p_config);
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+/* DIB807x generic */
+static struct dibx000_agc_config dib807x_agc_config[2] = {
+	{
+		BAND_VHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup*/
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}, {
+		BAND_UHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup */
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}
+};
+
+static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
+	.internal = 60000,
+	.sampling = 15000,
+	.pll_prediv = 1,
+	.pll_ratio = 20,
+	.pll_range = 3,
+	.pll_reset = 1,
+	.pll_bypass = 0,
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 1,
+	.ADClkSrc = 1,
+	.modulo = 2,
+	.sad_cfg = (3 << 14) | (1 << 12) | (599 << 0),	/* sad_cfg: refsel, sel, freq_15k*/
+	.ifreq = (0 << 25) | 0,				/* ifreq = 0.000000 MHz*/
+	.timf = 18179755,
+	.xtal_hz = 12000000,
+};
+
+static struct dib8000_config dib807x_dib8000_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.div_cfg = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}, {
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}
+};
+
+static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	return state->dib8000_ops.set_gpio(fe, 5, 0, !onoff);
+}
+
+static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	return state->dib8000_ops.set_gpio(fe, 0, 0, onoff);
+}
+
+static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
+    { 240,      7},
+    { 0xffff,   6},
+};
+
+static struct dib0070_config dib807x_dib0070_config[2] = {
+	{
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib80xx_tuner_reset,
+		.sleep = dib80xx_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 4,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -100,
+		.freq_offset_khz_vhf = -100,
+	}, {
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib80xx_tuner_reset,
+		.sleep = dib80xx_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 2,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -25,
+		.freq_offset_khz_vhf = -25,
+	}
+};
+
+static int dib807x_set_param_override(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	u16 offset = dib0070_wbd_offset(fe);
+	u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
+	switch (band) {
+	case BAND_VHF:
+		offset += 750;
+		break;
+	case BAND_UHF:  /* fall-thru wanted */
+	default:
+		offset += 250; break;
+	}
+	deb_info("WBD for DiB8000: %d\n", offset);
+	state->dib8000_ops.set_wbd_ref(fe, offset);
+
+	return state->set_param_save(fe);
+}
+
+static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe,
+			DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	if (adap->id == 0) {
+		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
+				&dib807x_dib0070_config[0]) == NULL)
+			return -ENODEV;
+	} else {
+		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
+				&dib807x_dib0070_config[1]) == NULL)
+			return -ENODEV;
+	}
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override;
+	return 0;
+}
+
+static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
+	u16 pid, int onoff)
+{
+	struct dib0700_adapter_state *state = adapter->priv;
+
+	return state->dib8000_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
+		int onoff)
+{
+	struct dib0700_adapter_state *state = adapter->priv;
+
+	return state->dib8000_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+/* STK807x */
+static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+		return -ENODEV;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				0x80, 0);
+
+	adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+/* STK807xPVR */
+static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+		return -ENODEV;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(500);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	/* initialize IC 0 */
+	state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0);
+
+	adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+		return -ENODEV;
+
+	/* initialize IC 1 */
+	state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0);
+
+	adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82,
+			      &dib807x_dib8000_config[1]);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+/* STK8096GP */
+static struct dibx000_agc_config dib8090_agc_config[2] = {
+	{
+	.band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+	.setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+	.inv_gain = 787,
+	.time_stabiliz = 10,
+
+	.alpha_level = 0,
+	.thlock = 118,
+
+	.wbd_inv = 0,
+	.wbd_ref = 3530,
+	.wbd_sel = 1,
+	.wbd_alpha = 5,
+
+	.agc1_max = 65535,
+	.agc1_min = 0,
+
+	.agc2_max = 65535,
+	.agc2_min = 0,
+
+	.agc1_pt1 = 0,
+	.agc1_pt2 = 32,
+	.agc1_pt3 = 114,
+	.agc1_slope1 = 143,
+	.agc1_slope2 = 144,
+	.agc2_pt1 = 114,
+	.agc2_pt2 = 227,
+	.agc2_slope1 = 116,
+	.agc2_slope2 = 117,
+
+	.alpha_mant = 28,
+	.alpha_exp = 26,
+	.beta_mant = 31,
+	.beta_exp = 51,
+
+	.perform_agc_softsplit = 0,
+	},
+	{
+	.band_caps = BAND_CBAND,
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+	.setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+	.inv_gain = 787,
+	.time_stabiliz = 10,
+
+	.alpha_level = 0,
+	.thlock = 118,
+
+	.wbd_inv = 0,
+	.wbd_ref = 3530,
+	.wbd_sel = 1,
+	.wbd_alpha = 5,
+
+	.agc1_max = 0,
+	.agc1_min = 0,
+
+	.agc2_max = 65535,
+	.agc2_min = 0,
+
+	.agc1_pt1 = 0,
+	.agc1_pt2 = 32,
+	.agc1_pt3 = 114,
+	.agc1_slope1 = 143,
+	.agc1_slope2 = 144,
+	.agc2_pt1 = 114,
+	.agc2_pt2 = 227,
+	.agc2_slope1 = 116,
+	.agc2_slope2 = 117,
+
+	.alpha_mant = 28,
+	.alpha_exp = 26,
+	.beta_mant = 31,
+	.beta_exp = 51,
+
+	.perform_agc_softsplit = 0,
+	}
+};
+
+static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
+	.internal = 54000,
+	.sampling = 13500,
+
+	.pll_prediv = 1,
+	.pll_ratio = 18,
+	.pll_range = 3,
+	.pll_reset = 1,
+	.pll_bypass = 0,
+
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 1,
+	.ADClkSrc = 1,
+	.modulo = 2,
+
+	.sad_cfg = (3 << 14) | (1 << 12) | (599 << 0),
+
+	.ifreq = (0 << 25) | 0,
+	.timf = 20199727,
+
+	.xtal_hz = 12000000,
+};
+
+static int dib8090_get_adc_power(struct dvb_frontend *fe)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	return state->dib8000_ops.get_adc_power(fe, 1);
+}
+
+static void dib8090_agc_control(struct dvb_frontend *fe, u8 restart)
+{
+	deb_info("AGC control callback: %i\n", restart);
+	dib0090_dcc_freq(fe, restart);
+
+	if (restart == 0) /* before AGC startup */
+		dib0090_set_dc_servo(fe, 1);
+}
+
+static struct dib8000_config dib809x_dib8000_config[2] = {
+	{
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 2,
+	.agc = dib8090_agc_config,
+	.agc_control = dib8090_agc_control,
+	.pll = &dib8090_pll_config_12mhz,
+	.tuner_is_baseband = 1,
+
+	.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+	.div_cfg = 0x31,
+	.output_mode = OUTMODE_MPEG2_FIFO,
+	.drives = 0x2d98,
+	.diversity_delay = 48,
+	.refclksel = 3,
+	}, {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 2,
+	.agc = dib8090_agc_config,
+	.agc_control = dib8090_agc_control,
+	.pll = &dib8090_pll_config_12mhz,
+	.tuner_is_baseband = 1,
+
+	.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+	.div_cfg = 0x31,
+	.output_mode = OUTMODE_DIVERSITY,
+	.drives = 0x2d08,
+	.diversity_delay = 1,
+	.refclksel = 3,
+	}
+};
+
+static struct dib0090_wbd_slope dib8090_wbd_table[] = {
+	/* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */
+	{ 120,     0, 500,  0,   500, 4 }, /* CBAND */
+	{ 170,     0, 450,  0,   450, 4 }, /* CBAND */
+	{ 380,    48, 373, 28,   259, 6 }, /* VHF */
+	{ 860,    34, 700, 36,   616, 6 }, /* high UHF */
+	{ 0xFFFF, 34, 700, 36,   616, 6 }, /* default */
+};
+
+static struct dib0090_config dib809x_dib0090_config = {
+	.io.pll_bypass = 1,
+	.io.pll_range = 1,
+	.io.pll_prediv = 1,
+	.io.pll_loopdiv = 20,
+	.io.adc_clock_ratio = 8,
+	.io.pll_int_loop_filt = 0,
+	.io.clock_khz = 12000,
+	.reset = dib80xx_tuner_reset,
+	.sleep = dib80xx_tuner_sleep,
+	.clkouttobamse = 1,
+	.analog_output = 1,
+	.i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
+	.use_pwm_agc = 1,
+	.clkoutdrive = 1,
+	.get_adc_power = dib8090_get_adc_power,
+	.freq_offset_khz_uhf = -63,
+	.freq_offset_khz_vhf = -143,
+	.wbd = dib8090_wbd_table,
+	.fref_clock_ratio = 6,
+};
+
+static u8 dib8090_compute_pll_parameters(struct dvb_frontend *fe)
+{
+	u8 optimal_pll_ratio = 20;
+	u32 freq_adc, ratio, rest, max = 0;
+	u8 pll_ratio;
+
+	for (pll_ratio = 17; pll_ratio <= 20; pll_ratio++) {
+		freq_adc = 12 * pll_ratio * (1 << 8) / 16;
+		ratio = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) / freq_adc;
+		rest = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) - ratio * freq_adc;
+
+		if (rest > freq_adc / 2)
+			rest = freq_adc - rest;
+		deb_info("PLL ratio=%i rest=%i\n", pll_ratio, rest);
+		if ((rest > max) && (rest > 717)) {
+			optimal_pll_ratio = pll_ratio;
+			max = rest;
+		}
+	}
+	deb_info("optimal PLL ratio=%i\n", optimal_pll_ratio);
+
+	return optimal_pll_ratio;
+}
+
+static int dib8096_set_param_override(struct dvb_frontend *fe)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+	u8 pll_ratio, band = BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000);
+	u16 target, ltgain, rf_gain_limit;
+	u32 timf;
+	int ret = 0;
+	enum frontend_tune_state tune_state = CT_SHUTDOWN;
+
+	switch (band) {
+	default:
+		deb_info("Warning : Rf frequency  (%iHz) is not in the supported range, using VHF switch ", fe->dtv_property_cache.frequency);
+		fallthrough;
+	case BAND_VHF:
+		state->dib8000_ops.set_gpio(fe, 3, 0, 1);
+		break;
+	case BAND_UHF:
+		state->dib8000_ops.set_gpio(fe, 3, 0, 0);
+		break;
+	}
+
+	ret = state->set_param_save(fe);
+	if (ret < 0)
+		return ret;
+
+	if (fe->dtv_property_cache.bandwidth_hz != 6000000) {
+		deb_info("only 6MHz bandwidth is supported\n");
+		return -EINVAL;
+	}
+
+	/* Update PLL if needed ratio */
+	state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
+
+	/* Get optimize PLL ratio to remove spurious */
+	pll_ratio = dib8090_compute_pll_parameters(fe);
+	if (pll_ratio == 17)
+		timf = 21387946;
+	else if (pll_ratio == 18)
+		timf = 20199727;
+	else if (pll_ratio == 19)
+		timf = 19136583;
+	else
+		timf = 18179756;
+
+	/* Update ratio */
+	state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio);
+
+	state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, timf);
+
+	if (band != BAND_CBAND) {
+		/* dib0090_get_wbd_target is returning any possible temperature compensated wbd-target */
+		target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2;
+		state->dib8000_ops.set_wbd_ref(fe, target);
+	}
+
+	if (band == BAND_CBAND) {
+		deb_info("tuning in CBAND - soft-AGC startup\n");
+		dib0090_set_tune_state(fe, CT_AGC_START);
+
+		do {
+			ret = dib0090_gain_control(fe);
+			msleep(ret);
+			tune_state = dib0090_get_tune_state(fe);
+			if (tune_state == CT_AGC_STEP_0)
+				state->dib8000_ops.set_gpio(fe, 6, 0, 1);
+			else if (tune_state == CT_AGC_STEP_1) {
+				dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, &ltgain);
+				if (rf_gain_limit < 2000) /* activate the external attenuator in case of very high input power */
+					state->dib8000_ops.set_gpio(fe, 6, 0, 0);
+			}
+		} while (tune_state < CT_AGC_STOP);
+
+		deb_info("switching to PWM AGC\n");
+		dib0090_pwm_gain_reset(fe);
+		state->dib8000_ops.pwm_agc_reset(fe);
+		state->dib8000_ops.set_tune_state(fe, CT_DEMOD_START);
+	} else {
+		/* for everything else than CBAND we are using standard AGC */
+		deb_info("not tuning in CBAND - standard AGC startup\n");
+		dib0090_pwm_gain_reset(fe);
+	}
+
+	return 0;
+}
+
+static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	/* FIXME: if adap->id != 0, check if it is fe_adap[1] */
+	if (!dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config))
+		return -ENODEV;
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
+	return 0;
+}
+
+static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+		return -ENODEV;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0);
+
+	adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int stk809x_frontend1_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+		return -ENODEV;
+
+	state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x82, 0);
+
+	adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c;
+	struct dvb_frontend *fe_slave  = st->dib8000_ops.get_slave_frontend(adap->fe_adap[0].fe, 1);
+
+	if (fe_slave) {
+		tun_i2c = st->dib8000_ops.get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1);
+		if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL)
+			return -ENODEV;
+		fe_slave->dvb = adap->fe_adap[0].fe->dvb;
+		fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override;
+	}
+	tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
+		return -ENODEV;
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
+
+	return 0;
+}
+
+static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_frontend *fe_slave;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+		return -ENODEV;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(1000);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0);
+
+	adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
+	if (adap->fe_adap[0].fe == NULL)
+		return -ENODEV;
+
+	/* Needed to increment refcount */
+	if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+		return -ENODEV;
+
+	fe_slave = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
+	state->dib8000_ops.set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
+
+	return fe_slave == NULL ?  -ENODEV : 0;
+}
+
+/* TFE8096P */
+static struct dibx000_agc_config dib8096p_agc_config[2] = {
+	{
+		.band_caps		= BAND_UHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		   P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		   P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		   P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		   P_agc_write=0 */
+		.setup			= (0 << 15) | (0 << 14) | (5 << 11)
+			| (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
+			| (0 << 4) | (5 << 1) | (0 << 0),
+
+		.inv_gain		= 684,
+		.time_stabiliz	= 10,
+
+		.alpha_level	= 0,
+		.thlock			= 118,
+
+		.wbd_inv		= 0,
+		.wbd_ref		= 1200,
+		.wbd_sel		= 3,
+		.wbd_alpha		= 5,
+
+		.agc1_max		= 65535,
+		.agc1_min		= 0,
+
+		.agc2_max		= 32767,
+		.agc2_min		= 0,
+
+		.agc1_pt1		= 0,
+		.agc1_pt2		= 0,
+		.agc1_pt3		= 105,
+		.agc1_slope1	= 0,
+		.agc1_slope2	= 156,
+		.agc2_pt1		= 105,
+		.agc2_pt2		= 255,
+		.agc2_slope1	= 54,
+		.agc2_slope2	= 0,
+
+		.alpha_mant		= 28,
+		.alpha_exp		= 26,
+		.beta_mant		= 31,
+		.beta_exp		= 51,
+
+		.perform_agc_softsplit = 0,
+	} , {
+		.band_caps		= BAND_FM | BAND_VHF | BAND_CBAND,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		   P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		   P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		   P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		   P_agc_write=0 */
+		.setup			= (0 << 15) | (0 << 14) | (5 << 11)
+			| (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
+			| (0 << 4) | (5 << 1) | (0 << 0),
+
+		.inv_gain		= 732,
+		.time_stabiliz  = 10,
+
+		.alpha_level	= 0,
+		.thlock			= 118,
+
+		.wbd_inv		= 0,
+		.wbd_ref		= 1200,
+		.wbd_sel		= 3,
+		.wbd_alpha		= 5,
+
+		.agc1_max		= 65535,
+		.agc1_min		= 0,
+
+		.agc2_max		= 32767,
+		.agc2_min		= 0,
+
+		.agc1_pt1		= 0,
+		.agc1_pt2		= 0,
+		.agc1_pt3		= 98,
+		.agc1_slope1	= 0,
+		.agc1_slope2	= 167,
+		.agc2_pt1		= 98,
+		.agc2_pt2		= 255,
+		.agc2_slope1	= 52,
+		.agc2_slope2	= 0,
+
+		.alpha_mant		= 28,
+		.alpha_exp		= 26,
+		.beta_mant		= 31,
+		.beta_exp		= 51,
+
+		.perform_agc_softsplit = 0,
+	}
+};
+
+static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = {
+	.internal = 108000,
+	.sampling = 13500,
+	.pll_prediv = 1,
+	.pll_ratio = 9,
+	.pll_range = 1,
+	.pll_reset = 0,
+	.pll_bypass = 0,
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 0,
+	.ADClkSrc = 0,
+	.modulo = 2,
+	.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+	.ifreq = (0 << 25) | 0,
+	.timf = 20199729,
+	.xtal_hz = 12000000,
+};
+
+static struct dib8000_config tfe8096p_dib8000_config = {
+	.output_mpeg2_in_188_bytes	= 1,
+	.hostbus_diversity			= 1,
+	.update_lna					= NULL,
+
+	.agc_config_count			= 2,
+	.agc						= dib8096p_agc_config,
+	.pll						= &dib8096p_clock_config_12_mhz,
+
+	.gpio_dir					= DIB8000_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val					= DIB8000_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos				= DIB8000_GPIO_DEFAULT_PWM_POS,
+
+	.agc_control				= NULL,
+	.diversity_delay			= 48,
+	.output_mode				= OUTMODE_MPEG2_FIFO,
+	.enMpegOutput				= 1,
+};
+
+static struct dib0090_wbd_slope dib8096p_wbd_table[] = {
+	{ 380, 81, 850, 64, 540, 4},
+	{ 860, 51, 866, 21, 375, 4},
+	{1700, 0, 250, 0, 100, 6},
+	{2600, 0, 250, 0, 100, 6},
+	{ 0xFFFF, 0, 0, 0, 0, 0},
+};
+
+static struct dib0090_config tfe8096p_dib0090_config = {
+	.io.clock_khz			= 12000,
+	.io.pll_bypass			= 0,
+	.io.pll_range			= 0,
+	.io.pll_prediv			= 3,
+	.io.pll_loopdiv			= 6,
+	.io.adc_clock_ratio		= 0,
+	.io.pll_int_loop_filt	= 0,
+
+	.freq_offset_khz_uhf	= -143,
+	.freq_offset_khz_vhf	= -143,
+
+	.get_adc_power			= dib8090_get_adc_power,
+
+	.clkouttobamse			= 1,
+	.analog_output			= 0,
+
+	.wbd_vhf_offset			= 0,
+	.wbd_cband_offset		= 0,
+	.use_pwm_agc			= 1,
+	.clkoutdrive			= 0,
+
+	.fref_clock_ratio		= 1,
+
+	.ls_cfg_pad_drv			= 0,
+	.data_tx_drv			= 0,
+	.low_if					= NULL,
+	.in_soc					= 1,
+	.force_cband_input		= 0,
+};
+
+struct dibx090p_best_adc {
+	u32 timf;
+	u32 pll_loopdiv;
+	u32 pll_prediv;
+};
+
+static int dib8096p_get_best_sampling(struct dvb_frontend *fe, struct dibx090p_best_adc *adc)
+{
+	u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
+	u16 xtal = 12000;
+	u16 fcp_min = 1900;  /* PLL, Minimum Frequency of phase comparator (KHz) */
+	u16 fcp_max = 20000; /* PLL, Maximum Frequency of phase comparator (KHz) */
+	u32 fmem_max = 140000; /* 140MHz max SDRAM freq */
+	u32 fdem_min = 66000;
+	u32 fcp = 0, fs = 0, fdem = 0, fmem = 0;
+	u32 harmonic_id = 0;
+
+	adc->timf = 0;
+	adc->pll_loopdiv = loopdiv;
+	adc->pll_prediv = prediv;
+
+	deb_info("bandwidth = %d", fe->dtv_property_cache.bandwidth_hz);
+
+	/* Find Min and Max prediv */
+	while ((xtal / max_prediv) >= fcp_min)
+		max_prediv++;
+
+	max_prediv--;
+	min_prediv = max_prediv;
+	while ((xtal / min_prediv) <= fcp_max) {
+		min_prediv--;
+		if (min_prediv == 1)
+			break;
+	}
+	deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
+
+	min_prediv = 1;
+
+	for (prediv = min_prediv; prediv < max_prediv; prediv++) {
+		fcp = xtal / prediv;
+		if (fcp > fcp_min && fcp < fcp_max) {
+			for (loopdiv = 1; loopdiv < 64; loopdiv++) {
+				fmem = ((xtal/prediv) * loopdiv);
+				fdem = fmem / 2;
+				fs   = fdem / 4;
+
+				/* test min/max system restrictions */
+				if ((fdem >= fdem_min) && (fmem <= fmem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz / 1000)) {
+					spur = 0;
+					/* test fs harmonics positions */
+					for (harmonic_id = (fe->dtv_property_cache.frequency / (1000 * fs));  harmonic_id <= ((fe->dtv_property_cache.frequency / (1000 * fs)) + 1); harmonic_id++) {
+						if (((fs * harmonic_id) >= (fe->dtv_property_cache.frequency / 1000 - (fe->dtv_property_cache.bandwidth_hz / 2000))) &&  ((fs * harmonic_id) <= (fe->dtv_property_cache.frequency / 1000 + (fe->dtv_property_cache.bandwidth_hz / 2000)))) {
+							spur = 1;
+							break;
+						}
+					}
+
+					if (!spur) {
+						adc->pll_loopdiv = loopdiv;
+						adc->pll_prediv = prediv;
+						adc->timf = (4260880253U / fdem) * (1 << 8);
+						adc->timf += ((4260880253U % fdem) << 8) / fdem;
+
+						deb_info("RF %6d; BW %6d; Xtal %6d; Fmem %6d; Fdem %6d; Fs %6d; Prediv %2d; Loopdiv %2d; Timf %8d;", fe->dtv_property_cache.frequency, fe->dtv_property_cache.bandwidth_hz, xtal, fmem, fdem, fs, prediv, loopdiv, adc->timf);
+						break;
+					}
+				}
+			}
+		}
+		if (!spur)
+			break;
+	}
+
+	if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
+		return -EINVAL;
+	return 0;
+}
+
+static int dib8096p_agc_startup(struct dvb_frontend *fe)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+	struct dibx000_bandwidth_config pll;
+	struct dibx090p_best_adc adc;
+	u16 target;
+	int ret;
+
+	ret = state->set_param_save(fe);
+	if (ret < 0)
+		return ret;
+	memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
+
+	dib0090_pwm_gain_reset(fe);
+	/* dib0090_get_wbd_target is returning any possible
+	   temperature compensated wbd-target */
+	target = (dib0090_get_wbd_target(fe) * 8  + 1) / 2;
+	state->dib8000_ops.set_wbd_ref(fe, target);
+
+	if (dib8096p_get_best_sampling(fe, &adc) == 0) {
+		pll.pll_ratio  = adc.pll_loopdiv;
+		pll.pll_prediv = adc.pll_prediv;
+
+		dib0700_set_i2c_speed(adap->dev, 200);
+		state->dib8000_ops.update_pll(fe, &pll, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
+		state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
+		dib0700_set_i2c_speed(adap->dev, 1000);
+	}
+	return 0;
+}
+
+static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+	u32 fw_version;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+		return -ENODEV;
+
+	dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
+	if (fw_version >= 0x10200)
+		st->fw_use_new_i2c_api = 1;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1);
+
+	adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap,
+					     0x80, &tfe8096p_dib8000_config);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_tuner(adap->fe_adap[0].fe);
+
+	tfe8096p_dib0090_config.reset = st->dib8000_ops.tuner_sleep;
+	tfe8096p_dib0090_config.sleep = st->dib8000_ops.tuner_sleep;
+	tfe8096p_dib0090_config.wbd = dib8096p_wbd_table;
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
+				&tfe8096p_dib0090_config) == NULL)
+		return -ENODEV;
+
+	st->dib8000_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup;
+	return 0;
+}
+
+/* STK9090M */
+static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
+{
+	return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+	return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	return dib9000_set_gpio(fe, 5, 0, !onoff);
+}
+
+static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	return dib9000_set_gpio(fe, 0, 0, onoff);
+}
+
+static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len)
+{
+	u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 };
+	u8 rb[2];
+	struct i2c_msg msg[2] = {
+		{.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2},
+		{.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2},
+	};
+	u8 index_data;
+
+	dibx000_i2c_set_speed(i2c, 250);
+
+	if (i2c_transfer(i2c, msg, 2) != 2)
+		return -EIO;
+
+	switch (rb[0] << 8 | rb[1]) {
+	case 0:
+			deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n");
+			return -EIO;
+	case 1:
+			deb_info("Found DiB0170 rev2");
+			break;
+	case 2:
+			deb_info("Found DiB0190 rev2");
+			break;
+	default:
+			deb_info("DiB01x0 not found");
+			return -EIO;
+	}
+
+	for (index_data = 0; index_data < len; index_data += 2) {
+		wb[2] = (data[index_data + 1] >> 8) & 0xff;
+		wb[3] = (data[index_data + 1]) & 0xff;
+
+		if (data[index_data] == 0) {
+			wb[0] = (data[index_data] >> 8) & 0xff;
+			wb[1] = (data[index_data]) & 0xff;
+			msg[0].len = 2;
+			if (i2c_transfer(i2c, msg, 2) != 2)
+				return -EIO;
+			wb[2] |= rb[0];
+			wb[3] |= rb[1] & ~(3 << 4);
+		}
+
+		wb[0] = (data[index_data] >> 8)&0xff;
+		wb[1] = (data[index_data])&0xff;
+		msg[0].len = 4;
+		if (i2c_transfer(i2c, &msg[0], 1) != 1)
+			return -EIO;
+	}
+	return 0;
+}
+
+static struct dib9000_config stk9090m_config = {
+	.output_mpeg2_in_188_bytes = 1,
+	.output_mode = OUTMODE_MPEG2_FIFO,
+	.vcxo_timer = 279620,
+	.timing_frequency = 20452225,
+	.demod_clock_khz = 60000,
+	.xtal_clock_khz = 30000,
+	.if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
+	.subband = {
+		2,
+		{
+			{ 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */
+			{ 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */
+			{ 0 },
+		},
+	},
+	.gpio_function = {
+		{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
+		{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
+	},
+};
+
+static struct dib9000_config nim9090md_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes = 1,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.vcxo_timer = 279620,
+		.timing_frequency = 20452225,
+		.demod_clock_khz = 60000,
+		.xtal_clock_khz = 30000,
+		.if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
+	}, {
+		.output_mpeg2_in_188_bytes = 1,
+		.output_mode = OUTMODE_DIVERSITY,
+		.vcxo_timer = 279620,
+		.timing_frequency = 20452225,
+		.demod_clock_khz = 60000,
+		.xtal_clock_khz = 30000,
+		.if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
+		.subband = {
+			2,
+			{
+				{ 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */
+				{ 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */
+				{ 0 },
+			},
+		},
+		.gpio_function = {
+			{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
+			{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
+		},
+	}
+};
+
+static struct dib0090_config dib9090_dib0090_config = {
+	.io.pll_bypass = 0,
+	.io.pll_range = 1,
+	.io.pll_prediv = 1,
+	.io.pll_loopdiv = 8,
+	.io.adc_clock_ratio = 8,
+	.io.pll_int_loop_filt = 0,
+	.io.clock_khz = 30000,
+	.reset = dib90x0_tuner_reset,
+	.sleep = dib90x0_tuner_sleep,
+	.clkouttobamse = 0,
+	.analog_output = 0,
+	.use_pwm_agc = 0,
+	.clkoutdrive = 0,
+	.freq_offset_khz_uhf = 0,
+	.freq_offset_khz_vhf = 0,
+};
+
+static struct dib0090_config nim9090md_dib0090_config[2] = {
+	{
+		.io.pll_bypass = 0,
+		.io.pll_range = 1,
+		.io.pll_prediv = 1,
+		.io.pll_loopdiv = 8,
+		.io.adc_clock_ratio = 8,
+		.io.pll_int_loop_filt = 0,
+		.io.clock_khz = 30000,
+		.reset = dib90x0_tuner_reset,
+		.sleep = dib90x0_tuner_sleep,
+		.clkouttobamse = 1,
+		.analog_output = 0,
+		.use_pwm_agc = 0,
+		.clkoutdrive = 0,
+		.freq_offset_khz_uhf = 0,
+		.freq_offset_khz_vhf = 0,
+	}, {
+		.io.pll_bypass = 0,
+		.io.pll_range = 1,
+		.io.pll_prediv = 1,
+		.io.pll_loopdiv = 8,
+		.io.adc_clock_ratio = 8,
+		.io.pll_int_loop_filt = 0,
+		.io.clock_khz = 30000,
+		.reset = dib90x0_tuner_reset,
+		.sleep = dib90x0_tuner_sleep,
+		.clkouttobamse = 0,
+		.analog_output = 0,
+		.use_pwm_agc = 0,
+		.clkoutdrive = 0,
+		.freq_offset_khz_uhf = 0,
+		.freq_offset_khz_vhf = 0,
+	}
+};
+
+
+static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+	struct dib0700_state *st = adap->dev->priv;
+	u32 fw_version;
+
+	/* Make use of the new i2c functions from FW 1.20 */
+	dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
+	if (fw_version >= 0x10200)
+		st->fw_use_new_i2c_api = 1;
+	dib0700_set_i2c_speed(adap->dev, 340);
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80);
+
+	if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
+		deb_info("%s: Upload failed. (file not found?)\n", __func__);
+		return -ENODEV;
+	} else {
+		deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size);
+	}
+	stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size;
+	stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data;
+
+	adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int dib9090_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+	struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
+	u16 data_dib190[10] = {
+		1, 0x1374,
+		2, 0x01a2,
+		7, 0x0020,
+		0, 0x00ef,
+		8, 0x0486,
+	};
+
+	if (!IS_ENABLED(CONFIG_DVB_DIB9000))
+		return -ENODEV;
+	if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL)
+		return -ENODEV;
+	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+	if (!i2c)
+		return -ENODEV;
+	if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0)
+		return -ENODEV;
+	dib0700_set_i2c_speed(adap->dev, 1500);
+	if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
+		return -ENODEV;
+	release_firmware(state->frontend_firmware);
+	return 0;
+}
+
+static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+	struct dib0700_state *st = adap->dev->priv;
+	struct i2c_adapter *i2c;
+	struct dvb_frontend *fe_slave;
+	u32 fw_version;
+
+	/* Make use of the new i2c functions from FW 1.20 */
+	dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
+	if (fw_version >= 0x10200)
+		st->fw_use_new_i2c_api = 1;
+	dib0700_set_i2c_speed(adap->dev, 340);
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
+		deb_info("%s: Upload failed. (file not found?)\n", __func__);
+		return -EIO;
+	} else {
+		deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size);
+	}
+	nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size;
+	nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data;
+	nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size;
+	nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data;
+
+	dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80);
+	adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]);
+
+	if (adap->fe_adap[0].fe == NULL)
+		return -ENODEV;
+
+	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0);
+	dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82);
+
+	fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]);
+	dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
+
+	return fe_slave == NULL ?  -ENODEV : 0;
+}
+
+static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+	struct i2c_adapter *i2c;
+	struct dvb_frontend *fe_slave;
+	u16 data_dib190[10] = {
+		1, 0x5374,
+		2, 0x01ae,
+		7, 0x0020,
+		0, 0x00ef,
+		8, 0x0406,
+	};
+	if (!IS_ENABLED(CONFIG_DVB_DIB9000))
+		return -ENODEV;
+	i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
+	if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
+		return -ENODEV;
+	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+	if (!i2c)
+		return -ENODEV;
+	if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0)
+		return -ENODEV;
+
+	dib0700_set_i2c_speed(adap->dev, 1500);
+	if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
+		return -ENODEV;
+
+	fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1);
+	if (fe_slave != NULL) {
+		i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe);
+		dib9000_set_i2c_adapter(fe_slave, i2c);
+
+		i2c = dib9000_get_tuner_interface(fe_slave);
+		if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL)
+			return -ENODEV;
+		fe_slave->dvb = adap->fe_adap[0].fe->dvb;
+		dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 1500);
+		if (dib9000_firmware_post_pll_init(fe_slave) < 0)
+			return -ENODEV;
+	}
+	release_firmware(state->frontend_firmware);
+
+	return 0;
+}
+
+/* NIM7090 */
+static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dibx090p_best_adc *adc)
+{
+	u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
+
+	u16 xtal = 12000;
+	u32 fcp_min = 1900;  /* PLL Minimum Frequency comparator KHz */
+	u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */
+	u32 fdem_max = 76000;
+	u32 fdem_min = 69500;
+	u32 fcp = 0, fs = 0, fdem = 0;
+	u32 harmonic_id = 0;
+
+	adc->pll_loopdiv = loopdiv;
+	adc->pll_prediv = prediv;
+	adc->timf = 0;
+
+	deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min);
+
+	/* Find Min and Max prediv */
+	while ((xtal/max_prediv) >= fcp_min)
+		max_prediv++;
+
+	max_prediv--;
+	min_prediv = max_prediv;
+	while ((xtal/min_prediv) <= fcp_max) {
+		min_prediv--;
+		if (min_prediv == 1)
+			break;
+	}
+	deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
+
+	min_prediv = 2;
+
+	for (prediv = min_prediv ; prediv < max_prediv; prediv++) {
+		fcp = xtal / prediv;
+		if (fcp > fcp_min && fcp < fcp_max) {
+			for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) {
+				fdem = ((xtal/prediv) * loopdiv);
+				fs   = fdem / 4;
+				/* test min/max system restrictions */
+
+				if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) {
+					spur = 0;
+					/* test fs harmonics positions */
+					for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ;  harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) {
+						if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) &&  ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) {
+							spur = 1;
+							break;
+						}
+					}
+
+					if (!spur) {
+						adc->pll_loopdiv = loopdiv;
+						adc->pll_prediv = prediv;
+						adc->timf = 2396745143UL/fdem*(1 << 9);
+						adc->timf += ((2396745143UL%fdem) << 9)/fdem;
+						deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf);
+						break;
+					}
+				}
+			}
+		}
+		if (!spur)
+			break;
+	}
+
+
+	if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
+		return -EINVAL;
+	else
+		return 0;
+}
+
+static int dib7090_agc_startup(struct dvb_frontend *fe)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+	struct dibx000_bandwidth_config pll;
+	u16 target;
+	struct dibx090p_best_adc adc;
+	int ret;
+
+	ret = state->set_param_save(fe);
+	if (ret < 0)
+		return ret;
+
+	memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
+	dib0090_pwm_gain_reset(fe);
+	target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
+	state->dib7000p_ops.set_wbd_ref(fe, target);
+
+	if (dib7090p_get_best_sampling(fe, &adc) == 0) {
+		pll.pll_ratio  = adc.pll_loopdiv;
+		pll.pll_prediv = adc.pll_prediv;
+
+		state->dib7000p_ops.update_pll(fe, &pll);
+		state->dib7000p_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
+	}
+	return 0;
+}
+
+static int dib7090_agc_restart(struct dvb_frontend *fe, u8 restart)
+{
+	deb_info("AGC restart callback: %d", restart);
+	if (restart == 0) /* before AGC startup */
+		dib0090_set_dc_servo(fe, 1);
+	return 0;
+}
+
+static int tfe7790p_update_lna(struct dvb_frontend *fe, u16 agc_global)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	deb_info("update LNA: agc global=%i", agc_global);
+
+	if (agc_global < 25000) {
+		state->dib7000p_ops.set_gpio(fe, 8, 0, 0);
+		state->dib7000p_ops.set_agc1_min(fe, 0);
+	} else {
+		state->dib7000p_ops.set_gpio(fe, 8, 0, 1);
+		state->dib7000p_ops.set_agc1_min(fe, 32768);
+	}
+
+	return 0;
+}
+
+static struct dib0090_wbd_slope dib7090_wbd_table[] = {
+	{ 380,   81, 850, 64, 540,  4},
+	{ 860,   51, 866, 21,  375, 4},
+	{1700,    0, 250, 0,   100, 6},
+	{2600,    0, 250, 0,   100, 6},
+	{ 0xFFFF, 0,   0, 0,   0,   0},
+};
+
+static struct dibx000_agc_config dib7090_agc_config[2] = {
+	{
+		.band_caps      = BAND_UHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+		.setup          = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+		.inv_gain       = 687,
+		.time_stabiliz  = 10,
+
+		.alpha_level    = 0,
+		.thlock         = 118,
+
+		.wbd_inv        = 0,
+		.wbd_ref        = 1200,
+		.wbd_sel        = 3,
+		.wbd_alpha      = 5,
+
+		.agc1_max       = 65535,
+		.agc1_min       = 32768,
+
+		.agc2_max       = 65535,
+		.agc2_min       = 0,
+
+		.agc1_pt1       = 0,
+		.agc1_pt2       = 32,
+		.agc1_pt3       = 114,
+		.agc1_slope1    = 143,
+		.agc1_slope2    = 144,
+		.agc2_pt1       = 114,
+		.agc2_pt2       = 227,
+		.agc2_slope1    = 116,
+		.agc2_slope2    = 117,
+
+		.alpha_mant     = 18,
+		.alpha_exp      = 0,
+		.beta_mant      = 20,
+		.beta_exp       = 59,
+
+		.perform_agc_softsplit = 0,
+	} , {
+		.band_caps      = BAND_FM | BAND_VHF | BAND_CBAND,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+		.setup          = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+		.inv_gain       = 732,
+		.time_stabiliz  = 10,
+
+		.alpha_level    = 0,
+		.thlock         = 118,
+
+		.wbd_inv        = 0,
+		.wbd_ref        = 1200,
+		.wbd_sel        = 3,
+		.wbd_alpha      = 5,
+
+		.agc1_max       = 65535,
+		.agc1_min       = 0,
+
+		.agc2_max       = 65535,
+		.agc2_min       = 0,
+
+		.agc1_pt1       = 0,
+		.agc1_pt2       = 0,
+		.agc1_pt3       = 98,
+		.agc1_slope1    = 0,
+		.agc1_slope2    = 167,
+		.agc2_pt1       = 98,
+		.agc2_pt2       = 255,
+		.agc2_slope1    = 104,
+		.agc2_slope2    = 0,
+
+		.alpha_mant     = 18,
+		.alpha_exp      = 0,
+		.beta_mant      = 20,
+		.beta_exp       = 59,
+
+		.perform_agc_softsplit = 0,
+	}
+};
+
+static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = {
+	.internal = 60000,
+	.sampling = 15000,
+	.pll_prediv = 1,
+	.pll_ratio = 5,
+	.pll_range = 0,
+	.pll_reset = 0,
+	.pll_bypass = 0,
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 1,
+	.ADClkSrc = 1,
+	.modulo = 2,
+	.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+	.ifreq = (0 << 25) | 0,
+	.timf = 20452225,
+	.xtal_hz = 15000000,
+};
+
+static struct dib7000p_config nim7090_dib7000p_config = {
+	.output_mpeg2_in_188_bytes  = 1,
+	.hostbus_diversity			= 1,
+	.tuner_is_baseband			= 1,
+	.update_lna					= tfe7790p_update_lna, /* GPIO used is the same as TFE7790 */
+
+	.agc_config_count			= 2,
+	.agc						= dib7090_agc_config,
+
+	.bw							= &dib7090_clock_config_12_mhz,
+
+	.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.pwm_freq_div				= 0,
+
+	.agc_control				= dib7090_agc_restart,
+
+	.spur_protect				= 0,
+	.disable_sample_and_hold	= 0,
+	.enable_current_mirror		= 0,
+	.diversity_delay			= 0,
+
+	.output_mode				= OUTMODE_MPEG2_FIFO,
+	.enMpegOutput				= 1,
+};
+
+static int tfe7090p_pvr_update_lna(struct dvb_frontend *fe, u16 agc_global)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	deb_info("TFE7090P-PVR update LNA: agc global=%i", agc_global);
+	if (agc_global < 25000) {
+		state->dib7000p_ops.set_gpio(fe, 5, 0, 0);
+		state->dib7000p_ops.set_agc1_min(fe, 0);
+	} else {
+		state->dib7000p_ops.set_gpio(fe, 5, 0, 1);
+		state->dib7000p_ops.set_agc1_min(fe, 32768);
+	}
+
+	return 0;
+}
+
+static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes  = 1,
+		.hostbus_diversity			= 1,
+		.tuner_is_baseband			= 1,
+		.update_lna					= tfe7090p_pvr_update_lna,
+
+		.agc_config_count			= 2,
+		.agc						= dib7090_agc_config,
+
+		.bw							= &dib7090_clock_config_12_mhz,
+
+		.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+		.pwm_freq_div				= 0,
+
+		.agc_control				= dib7090_agc_restart,
+
+		.spur_protect				= 0,
+		.disable_sample_and_hold	= 0,
+		.enable_current_mirror		= 0,
+		.diversity_delay			= 0,
+
+		.output_mode				= OUTMODE_MPEG2_PAR_GATED_CLK,
+		.default_i2c_addr			= 0x90,
+		.enMpegOutput				= 1,
+	}, {
+		.output_mpeg2_in_188_bytes  = 1,
+		.hostbus_diversity			= 1,
+		.tuner_is_baseband			= 1,
+		.update_lna					= tfe7090p_pvr_update_lna,
+
+		.agc_config_count			= 2,
+		.agc						= dib7090_agc_config,
+
+		.bw							= &dib7090_clock_config_12_mhz,
+
+		.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+		.pwm_freq_div				= 0,
+
+		.agc_control				= dib7090_agc_restart,
+
+		.spur_protect				= 0,
+		.disable_sample_and_hold	= 0,
+		.enable_current_mirror		= 0,
+		.diversity_delay			= 0,
+
+		.output_mode				= OUTMODE_MPEG2_PAR_GATED_CLK,
+		.default_i2c_addr			= 0x92,
+		.enMpegOutput				= 0,
+	}
+};
+
+static struct dib0090_config nim7090_dib0090_config = {
+	.io.clock_khz = 12000,
+	.io.pll_bypass = 0,
+	.io.pll_range = 0,
+	.io.pll_prediv = 3,
+	.io.pll_loopdiv = 6,
+	.io.adc_clock_ratio = 0,
+	.io.pll_int_loop_filt = 0,
+
+	.freq_offset_khz_uhf = 0,
+	.freq_offset_khz_vhf = 0,
+
+	.clkouttobamse = 1,
+	.analog_output = 0,
+
+	.wbd_vhf_offset = 0,
+	.wbd_cband_offset = 0,
+	.use_pwm_agc = 1,
+	.clkoutdrive = 0,
+
+	.fref_clock_ratio = 0,
+
+	.wbd = dib7090_wbd_table,
+
+	.ls_cfg_pad_drv = 0,
+	.data_tx_drv = 0,
+	.low_if = NULL,
+	.in_soc = 1,
+};
+
+static struct dib7000p_config tfe7790p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes  = 1,
+	.hostbus_diversity			= 1,
+	.tuner_is_baseband			= 1,
+	.update_lna					= tfe7790p_update_lna,
+
+	.agc_config_count			= 2,
+	.agc						= dib7090_agc_config,
+
+	.bw							= &dib7090_clock_config_12_mhz,
+
+	.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.pwm_freq_div				= 0,
+
+	.agc_control				= dib7090_agc_restart,
+
+	.spur_protect				= 0,
+	.disable_sample_and_hold	= 0,
+	.enable_current_mirror		= 0,
+	.diversity_delay			= 0,
+
+	.output_mode				= OUTMODE_MPEG2_PAR_GATED_CLK,
+	.enMpegOutput				= 1,
+};
+
+static struct dib0090_config tfe7790p_dib0090_config = {
+	.io.clock_khz = 12000,
+	.io.pll_bypass = 0,
+	.io.pll_range = 0,
+	.io.pll_prediv = 3,
+	.io.pll_loopdiv = 6,
+	.io.adc_clock_ratio = 0,
+	.io.pll_int_loop_filt = 0,
+
+	.freq_offset_khz_uhf = 0,
+	.freq_offset_khz_vhf = 0,
+
+	.clkouttobamse = 1,
+	.analog_output = 0,
+
+	.wbd_vhf_offset = 0,
+	.wbd_cband_offset = 0,
+	.use_pwm_agc = 1,
+	.clkoutdrive = 0,
+
+	.fref_clock_ratio = 0,
+
+	.wbd = dib7090_wbd_table,
+
+	.ls_cfg_pad_drv = 0,
+	.data_tx_drv = 0,
+	.low_if = NULL,
+	.in_soc = 1,
+	.force_cband_input = 0,
+	.is_dib7090e = 0,
+	.force_crystal_mode = 1,
+};
+
+static struct dib0090_config tfe7090pvr_dib0090_config[2] = {
+	{
+		.io.clock_khz = 12000,
+		.io.pll_bypass = 0,
+		.io.pll_range = 0,
+		.io.pll_prediv = 3,
+		.io.pll_loopdiv = 6,
+		.io.adc_clock_ratio = 0,
+		.io.pll_int_loop_filt = 0,
+
+		.freq_offset_khz_uhf = 50,
+		.freq_offset_khz_vhf = 70,
+
+		.clkouttobamse = 1,
+		.analog_output = 0,
+
+		.wbd_vhf_offset = 0,
+		.wbd_cband_offset = 0,
+		.use_pwm_agc = 1,
+		.clkoutdrive = 0,
+
+		.fref_clock_ratio = 0,
+
+		.wbd = dib7090_wbd_table,
+
+		.ls_cfg_pad_drv = 0,
+		.data_tx_drv = 0,
+		.low_if = NULL,
+		.in_soc = 1,
+	}, {
+		.io.clock_khz = 12000,
+		.io.pll_bypass = 0,
+		.io.pll_range = 0,
+		.io.pll_prediv = 3,
+		.io.pll_loopdiv = 6,
+		.io.adc_clock_ratio = 0,
+		.io.pll_int_loop_filt = 0,
+
+		.freq_offset_khz_uhf = -50,
+		.freq_offset_khz_vhf = -70,
+
+		.clkouttobamse = 1,
+		.analog_output = 0,
+
+		.wbd_vhf_offset = 0,
+		.wbd_cband_offset = 0,
+		.use_pwm_agc = 1,
+		.clkoutdrive = 0,
+
+		.fref_clock_ratio = 0,
+
+		.wbd = dib7090_wbd_table,
+
+		.ls_cfg_pad_drv = 0,
+		.data_tx_drv = 0,
+		.low_if = NULL,
+		.in_soc = 1,
+	}
+};
+
+static int nim7090_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) {
+		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n", __func__);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
+		return -ENODEV;
+	}
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int nim7090_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
+
+	nim7090_dib0090_config.reset = st->dib7000p_ops.tuner_sleep;
+	nim7090_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep;
+	nim7090_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power;
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL)
+		return -ENODEV;
+
+	st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+	return 0;
+}
+
+static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	/* The TFE7090 requires the dib0700 to not be in master mode */
+	st->disable_streaming_master_mode = 1;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	/* initialize IC 0 */
+	if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) {
+		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n", __func__);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
+		return -ENODEV;
+	}
+
+	dib0700_set_i2c_speed(adap->dev, 340);
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]);
+	if (adap->fe_adap[0].fe == NULL)
+		return -ENODEV;
+
+	state->dib7000p_ops.slave_reset(adap->fe_adap[0].fe);
+
+	return 0;
+}
+
+static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *i2c;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (adap->dev->adapter[0].fe_adap[0].fe == NULL) {
+		err("the master dib7090 has to be initialized first");
+		return -ENODEV; /* the master device has not been initialized */
+	}
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1);
+	if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) {
+		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n", __func__);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(i2c, 0x92, &tfe7090pvr_dib7000p_config[1]);
+	dib0700_set_i2c_speed(adap->dev, 200);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
+
+	tfe7090pvr_dib0090_config[0].reset = st->dib7000p_ops.tuner_sleep;
+	tfe7090pvr_dib0090_config[0].sleep = st->dib7000p_ops.tuner_sleep;
+	tfe7090pvr_dib0090_config[0].get_adc_power = st->dib7000p_ops.get_adc_power;
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL)
+		return -ENODEV;
+
+	st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+	return 0;
+}
+
+static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
+
+	tfe7090pvr_dib0090_config[1].reset = st->dib7000p_ops.tuner_sleep;
+	tfe7090pvr_dib0090_config[1].sleep = st->dib7000p_ops.tuner_sleep;
+	tfe7090pvr_dib0090_config[1].get_adc_power = st->dib7000p_ops.get_adc_power;
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL)
+		return -ENODEV;
+
+	st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+	return 0;
+}
+
+static int tfe7790p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	/* The TFE7790P requires the dib0700 to not be in master mode */
+	st->disable_streaming_master_mode = 1;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	msleep(20);
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap,
+				1, 0x10, &tfe7790p_dib7000p_config) != 0) {
+		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
+				__func__);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
+		return -ENODEV;
+	}
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
+			0x80, &tfe7790p_dib7000p_config);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int tfe7790p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c =
+		st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
+
+
+	tfe7790p_dib0090_config.reset = st->dib7000p_ops.tuner_sleep;
+	tfe7790p_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep;
+	tfe7790p_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power;
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
+				&tfe7790p_dib0090_config) == NULL)
+		return -ENODEV;
+
+	st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+	return 0;
+}
+
+/* STK7070PD */
+static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 1,
+		.agc = &dib7070_agc_config,
+		.bw  = &dib7070_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+		.spur_protect = 1,
+
+		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+	}, {
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 1,
+		.agc = &dib7070_agc_config,
+		.bw  = &dib7070_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+		.spur_protect = 1,
+
+		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+	}
+};
+
+static void stk7070pd_init(struct dvb_usb_device *dev)
+{
+	dib0700_set_gpio(dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 1);
+}
+
+static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	stk7070pd_init(adap->dev);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
+				     stk7070pd_dib7000p_config) != 0) {
+		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
+		    __func__);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int novatd_read_status_override(struct dvb_frontend *fe,
+				       enum fe_status *stat)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dvb_usb_device *dev = adap->dev;
+	struct dib0700_state *state = dev->priv;
+	int ret;
+
+	ret = state->read_status(fe, stat);
+
+	if (!ret)
+		dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT,
+				!!(*stat & FE_HAS_LOCK));
+
+	return ret;
+}
+
+static int novatd_sleep_override(struct dvb_frontend* fe)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dvb_usb_device *dev = adap->dev;
+	struct dib0700_state *state = dev->priv;
+
+	/* turn off LED */
+	dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0);
+
+	return state->sleep(fe);
+}
+
+/*
+ * novatd_frontend_attach - Nova-TD specific attach
+ *
+ * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for
+ * information purposes.
+ */
+static int novatd_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *dev = adap->dev;
+	struct dib0700_state *st = dev->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	if (adap->id == 0) {
+		stk7070pd_init(dev);
+
+		/* turn the power LED on, the other two off (just in case) */
+		dib0700_set_gpio(dev, GPIO0, GPIO_OUT, 0);
+		dib0700_set_gpio(dev, GPIO1, GPIO_OUT, 0);
+		dib0700_set_gpio(dev, GPIO2, GPIO_OUT, 1);
+
+		if (state->dib7000p_ops.i2c_enumeration(&dev->i2c_adap, 2, 18,
+					     stk7070pd_dib7000p_config) != 0) {
+			err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
+			    __func__);
+			dvb_detach(state->dib7000p_ops.set_wbd_ref);
+			return -ENODEV;
+		}
+	}
+
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&dev->i2c_adap,
+			adap->id == 0 ? 0x80 : 0x82,
+			&stk7070pd_dib7000p_config[adap->id]);
+
+	if (adap->fe_adap[0].fe == NULL)
+		return -ENODEV;
+
+	st->read_status = adap->fe_adap[0].fe->ops.read_status;
+	adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override;
+	st->sleep = adap->fe_adap[0].fe->ops.sleep;
+	adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override;
+
+	return 0;
+}
+
+/* S5H1411 */
+static struct s5h1411_config pinnacle_801e_config = {
+	.output_mode   = S5H1411_PARALLEL_OUTPUT,
+	.gpio          = S5H1411_GPIO_OFF,
+	.mpeg_timing   = S5H1411_MPEGTIMING_NONCONTINUOUS_NONINVERTING_CLOCK,
+	.qam_if        = S5H1411_IF_44000,
+	.vsb_if        = S5H1411_IF_44000,
+	.inversion     = S5H1411_INVERSION_OFF,
+	.status_mode   = S5H1411_DEMODLOCKING
+};
+
+/* Pinnacle PCTV HD Pro 801e GPIOs map:
+   GPIO0  - currently unknown
+   GPIO1  - xc5000 tuner reset
+   GPIO2  - CX25843 sleep
+   GPIO3  - currently unknown
+   GPIO4  - currently unknown
+   GPIO6  - currently unknown
+   GPIO7  - currently unknown
+   GPIO9  - currently unknown
+   GPIO10 - CX25843 reset
+ */
+static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* Make use of the new i2c functions from FW 1.20 */
+	st->fw_use_new_i2c_api = 1;
+
+	/* The s5h1411 requires the dib0700 to not be in master mode */
+	st->disable_streaming_master_mode = 1;
+
+	/* All msleep values taken from Windows USB trace */
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
+	dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(400);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	msleep(60);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
+	msleep(30);
+
+	/* Put the CX25843 to sleep for now since we're in digital mode */
+	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
+
+	/* GPIOs are initialized, do the attach */
+	adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
+			      &adap->dev->i2c_adap);
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int dib0700_xc5000_tuner_callback(void *priv, int component,
+					 int command, int arg)
+{
+	struct dvb_usb_adapter *adap = priv;
+
+	if (command == XC5000_TUNER_RESET) {
+		/* Reset the tuner */
+		dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
+		msleep(10);
+	} else {
+		err("xc5000: unknown tuner callback command: %d\n", command);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct xc5000_config s5h1411_xc5000_tunerconfig = {
+	.i2c_address      = 0x64,
+	.if_khz           = 5380,
+};
+
+static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	/* FIXME: generalize & move to common area */
+	adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback;
+
+	return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
+			  &s5h1411_xc5000_tunerconfig)
+		== NULL ? -ENODEV : 0;
+}
+
+static int dib0700_xc4000_tuner_callback(void *priv, int component,
+					 int command, int arg)
+{
+	struct dvb_usb_adapter *adap = priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (command == XC4000_TUNER_RESET) {
+		/* Reset the tuner */
+		state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
+		msleep(10);
+		state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+	} else {
+		err("xc4000: unknown tuner callback command: %d\n", command);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
+	.band_caps = BAND_UHF | BAND_VHF,
+	.setup = 0x64,
+	.inv_gain = 0x02c8,
+	.time_stabiliz = 0x15,
+	.alpha_level = 0x00,
+	.thlock = 0x76,
+	.wbd_inv = 0x01,
+	.wbd_ref = 0x0b33,
+	.wbd_sel = 0x00,
+	.wbd_alpha = 0x02,
+	.agc1_max = 0x00,
+	.agc1_min = 0x00,
+	.agc2_max = 0x9b26,
+	.agc2_min = 0x26ca,
+	.agc1_pt1 = 0x00,
+	.agc1_pt2 = 0x00,
+	.agc1_pt3 = 0x00,
+	.agc1_slope1 = 0x00,
+	.agc1_slope2 = 0x00,
+	.agc2_pt1 = 0x00,
+	.agc2_pt2 = 0x80,
+	.agc2_slope1 = 0x1d,
+	.agc2_slope2 = 0x1d,
+	.alpha_mant = 0x11,
+	.alpha_exp = 0x1b,
+	.beta_mant = 0x17,
+	.beta_exp = 0x33,
+	.perform_agc_softsplit = 0x00,
+};
+
+static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
+	.internal = 60000,
+	.sampling = 30000,
+	.pll_prediv = 1,
+	.pll_ratio = 8,
+	.pll_range = 3,
+	.pll_reset = 1,
+	.pll_bypass = 0,
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 1,
+	.ADClkSrc = 1,
+	.modulo = 0,
+	.sad_cfg = (3 << 14) | (1 << 12) | 524, /* sad_cfg: refsel, sel, freq_15k */
+	.ifreq = 39370534,
+	.timf = 20452225,
+	.xtal_hz = 30000000
+};
+
+/* FIXME: none of these inputs are validated yet */
+static struct dib7000p_config pctv_340e_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &stk7700p_7000p_xc4000_agc_config,
+	.bw  = &stk7700p_xc4000_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+/* PCTV 340e GPIOs map:
+   dib0700:
+   GPIO2  - CX25843 sleep
+   GPIO3  - CS5340 reset
+   GPIO5  - IRD
+   GPIO6  - Power Supply
+   GPIO8  - LNA (1=off 0=on)
+   GPIO10 - CX25843 reset
+   dib7000:
+   GPIO8  - xc4000 reset
+ */
+static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+		return -ENODEV;
+
+	/* Power Supply on */
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0);
+	msleep(50);
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1);
+	msleep(100); /* Allow power supply to settle before probing */
+
+	/* cx25843 reset */
+	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 0);
+	msleep(1); /* cx25843 datasheet say 350us required */
+	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 1);
+
+	/* LNA off for now */
+	dib0700_set_gpio(adap->dev, GPIO8,  GPIO_OUT, 1);
+
+	/* Put the CX25843 to sleep for now since we're in digital mode */
+	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
+
+	/* FIXME: not verified yet */
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(500);
+
+	if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
+		/* Demodulator not found for some reason? */
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x12,
+			      &pctv_340e_config);
+	st->is_dib7000pc = 1;
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static struct xc4000_config dib7000p_xc4000_tunerconfig = {
+	.i2c_address	  = 0x61,
+	.default_pm	  = 1,
+	.dvb_amplitude	  = 0,
+	.set_smoothedcvbs = 0,
+	.if_khz		  = 5400
+};
+
+static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *tun_i2c;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	/* The xc4000 is not on the main i2c bus */
+	tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
+					  DIBX000_I2C_INTERFACE_TUNER, 1);
+	if (tun_i2c == NULL) {
+		printk(KERN_ERR "Could not reach tuner i2c bus\n");
+		return 0;
+	}
+
+	/* Setup the reset callback */
+	adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback;
+
+	return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c,
+			  &dib7000p_xc4000_tunerconfig)
+		== NULL ? -ENODEV : 0;
+}
+
+static struct lgdt3305_config hcw_lgdt3305_config = {
+	.i2c_addr           = 0x0e,
+	.mpeg_mode          = LGDT3305_MPEG_PARALLEL,
+	.tpclk_edge         = LGDT3305_TPCLK_FALLING_EDGE,
+	.tpvalid_polarity   = LGDT3305_TP_VALID_LOW,
+	.deny_i2c_rptr      = 0,
+	.spectral_inversion = 1,
+	.qam_if_khz         = 6000,
+	.vsb_if_khz         = 6000,
+	.usref_8vsb         = 0x0500,
+};
+
+static struct mxl5007t_config hcw_mxl5007t_config = {
+	.xtal_freq_hz = MxL_XTAL_25_MHZ,
+	.if_freq_hz = MxL_IF_6_MHZ,
+	.invert_if = 1,
+};
+
+/* TIGER-ATSC map:
+   GPIO0  - LNA_CTR  (H: LNA power enabled, L: LNA power disabled)
+   GPIO1  - ANT_SEL  (H: VPA, L: MCX)
+   GPIO4  - SCL2
+   GPIO6  - EN_TUNER
+   GPIO7  - SDA2
+   GPIO10 - DEM_RST
+
+   MXL is behind LG's i2c repeater.  LG is on SCL2/SDA2 gpios on the DIB
+ */
+static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* Make use of the new i2c functions from FW 1.20 */
+	st->fw_use_new_i2c_api = 1;
+
+	st->disable_streaming_master_mode = 1;
+
+	/* fe power enable */
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(30);
+
+	/* demod reset */
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(30);
+
+	adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach,
+			      &hcw_lgdt3305_config,
+			      &adap->dev->i2c_adap);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
+			  &adap->dev->i2c_adap, 0x60,
+			  &hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
+}
+
+static int xbox_one_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+	struct i2c_client *client_demod, *client_tuner;
+	struct dvb_usb_device *d = adap->dev;
+	struct mn88472_config mn88472_config = { };
+	struct tda18250_config tda18250_config;
+	struct i2c_board_info info;
+
+	st->fw_use_new_i2c_api = 1;
+	st->disable_streaming_master_mode = 1;
+
+	/* fe power enable */
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(30);
+
+	/* demod reset */
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(30);
+
+	/* attach demod */
+	mn88472_config.fe = &adap->fe_adap[0].fe;
+	mn88472_config.i2c_wr_max = 22;
+	mn88472_config.xtal = 20500000;
+	mn88472_config.ts_mode = PARALLEL_TS_MODE;
+	mn88472_config.ts_clock = FIXED_TS_CLOCK;
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strscpy(info.type, "mn88472", I2C_NAME_SIZE);
+	info.addr = 0x18;
+	info.platform_data = &mn88472_config;
+	request_module(info.type);
+	client_demod = i2c_new_client_device(&d->i2c_adap, &info);
+	if (!i2c_client_has_driver(client_demod))
+		goto fail_demod_device;
+	if (!try_module_get(client_demod->dev.driver->owner))
+		goto fail_demod_module;
+
+	st->i2c_client_demod = client_demod;
+
+	adap->fe_adap[0].fe = mn88472_config.get_dvb_frontend(client_demod);
+
+	/* attach tuner */
+	memset(&tda18250_config, 0, sizeof(tda18250_config));
+	tda18250_config.if_dvbt_6 = 3950;
+	tda18250_config.if_dvbt_7 = 4450;
+	tda18250_config.if_dvbt_8 = 4950;
+	tda18250_config.if_dvbc_6 = 4950;
+	tda18250_config.if_dvbc_8 = 4950;
+	tda18250_config.if_atsc = 4079;
+	tda18250_config.loopthrough = true;
+	tda18250_config.xtal_freq = TDA18250_XTAL_FREQ_27MHZ;
+	tda18250_config.fe = adap->fe_adap[0].fe;
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strscpy(info.type, "tda18250", I2C_NAME_SIZE);
+	info.addr = 0x60;
+	info.platform_data = &tda18250_config;
+
+	request_module(info.type);
+	client_tuner = i2c_new_client_device(&adap->dev->i2c_adap, &info);
+	if (!i2c_client_has_driver(client_tuner))
+		goto fail_tuner_device;
+	if (!try_module_get(client_tuner->dev.driver->owner))
+		goto fail_tuner_module;
+
+	st->i2c_client_tuner = client_tuner;
+	return 0;
+
+fail_tuner_module:
+	i2c_unregister_device(client_tuner);
+fail_tuner_device:
+	module_put(client_demod->dev.driver->owner);
+fail_demod_module:
+	i2c_unregister_device(client_demod);
+fail_demod_device:
+	return -ENODEV;
+}
+
+
+/* DVB-USB and USB stuff follows */
+enum {
+	DIBCOM_STK7700P,
+	DIBCOM_STK7700P_PC,
+	HAUPPAUGE_NOVA_T_500,
+	HAUPPAUGE_NOVA_T_500_2,
+	HAUPPAUGE_NOVA_T_STICK,
+	AVERMEDIA_VOLAR,
+	COMPRO_VIDEOMATE_U500,
+	UNIWILL_STK7700P,
+	LEADTEK_WINFAST_DTV_DONGLE_STK7700P,
+	HAUPPAUGE_NOVA_T_STICK_2,
+	AVERMEDIA_VOLAR_2,
+	PINNACLE_PCTV2000E,
+	TERRATEC_CINERGY_DT_XS_DIVERSITY,
+	HAUPPAUGE_NOVA_TD_STICK,
+	DIBCOM_STK7700D,
+	DIBCOM_STK7070P,
+	PINNACLE_PCTV_DVB_T_FLASH,
+	DIBCOM_STK7070PD,
+	PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T,
+	COMPRO_VIDEOMATE_U500_PC,
+	AVERMEDIA_EXPRESS,
+	GIGABYTE_U7000,
+	ULTIMA_ARTEC_T14BR,
+	ASUS_U3000,
+	ASUS_U3100,
+	HAUPPAUGE_NOVA_T_STICK_3,
+	HAUPPAUGE_MYTV_T,
+	TERRATEC_CINERGY_HT_USB_XE,
+	PINNACLE_EXPRESSCARD_320CX,
+	PINNACLE_PCTV72E,
+	PINNACLE_PCTV73E,
+	YUAN_EC372S,
+	TERRATEC_CINERGY_HT_EXPRESS,
+	TERRATEC_CINERGY_T_XXS,
+	LEADTEK_WINFAST_DTV_DONGLE_STK7700P_2,
+	HAUPPAUGE_NOVA_TD_STICK_52009,
+	HAUPPAUGE_NOVA_T_500_3,
+	GIGABYTE_U8000,
+	YUAN_STK7700PH,
+	ASUS_U3000H,
+	PINNACLE_PCTV801E,
+	PINNACLE_PCTV801E_SE,
+	TERRATEC_CINERGY_T_EXPRESS,
+	TERRATEC_CINERGY_DT_XS_DIVERSITY_2,
+	SONY_PLAYTV,
+	YUAN_PD378S,
+	HAUPPAUGE_TIGER_ATSC,
+	HAUPPAUGE_TIGER_ATSC_B210,
+	YUAN_MC770,
+	ELGATO_EYETV_DTT,
+	ELGATO_EYETV_DTT_Dlx,
+	LEADTEK_WINFAST_DTV_DONGLE_H,
+	TERRATEC_T3,
+	TERRATEC_T5,
+	YUAN_STK7700D,
+	YUAN_STK7700D_2,
+	PINNACLE_PCTV73A,
+	PCTV_PINNACLE_PCTV73ESE,
+	PCTV_PINNACLE_PCTV282E,
+	DIBCOM_STK7770P,
+	TERRATEC_CINERGY_T_XXS_2,
+	DIBCOM_STK807XPVR,
+	DIBCOM_STK807XP,
+	PIXELVIEW_SBTVD,
+	EVOLUTEPC_TVWAY_PLUS,
+	PINNACLE_PCTV73ESE,
+	PINNACLE_PCTV282E,
+	DIBCOM_STK8096GP,
+	ELGATO_EYETV_DIVERSITY,
+	DIBCOM_NIM9090M,
+	DIBCOM_NIM8096MD,
+	DIBCOM_NIM9090MD,
+	DIBCOM_NIM7090,
+	DIBCOM_TFE7090PVR,
+	TECHNISAT_AIRSTAR_TELESTICK_2,
+	MEDION_CREATIX_CTX1921,
+	PINNACLE_PCTV340E,
+	PINNACLE_PCTV340E_SE,
+	DIBCOM_TFE7790P,
+	DIBCOM_TFE8096P,
+	ELGATO_EYETV_DTT_2,
+	PCTV_2002E,
+	PCTV_2002E_SE,
+	PCTV_DIBCOM_STK8096PVR,
+	DIBCOM_STK8096PVR,
+	HAMA_DVBT_HYBRID,
+	MICROSOFT_XBOX_ONE_TUNER,
+};
+
+struct usb_device_id dib0700_usb_id_table[] = {
+	DVB_USB_DEV(DIBCOM, DIBCOM_STK7700P),
+	DVB_USB_DEV(DIBCOM, DIBCOM_STK7700P_PC),
+	DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_500),
+	DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_500_2),
+	DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_STICK),
+	DVB_USB_DEV(AVERMEDIA, AVERMEDIA_VOLAR),
+	DVB_USB_DEV(COMPRO, COMPRO_VIDEOMATE_U500),
+	DVB_USB_DEV(UNIWILL, UNIWILL_STK7700P),
+	DVB_USB_DEV(LEADTEK, LEADTEK_WINFAST_DTV_DONGLE_STK7700P),
+	DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_STICK_2),
+	DVB_USB_DEV(AVERMEDIA, AVERMEDIA_VOLAR_2),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV2000E),
+	DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_DT_XS_DIVERSITY),
+	DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_TD_STICK),
+	DVB_USB_DEV(DIBCOM, DIBCOM_STK7700D),
+	DVB_USB_DEV(DIBCOM, DIBCOM_STK7070P),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV_DVB_T_FLASH),
+	DVB_USB_DEV(DIBCOM, DIBCOM_STK7070PD),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T),
+	DVB_USB_DEV(COMPRO, COMPRO_VIDEOMATE_U500_PC),
+	DVB_USB_DEV(AVERMEDIA, AVERMEDIA_EXPRESS),
+	DVB_USB_DEV(GIGABYTE, GIGABYTE_U7000),
+	DVB_USB_DEV(ULTIMA_ELECTRONIC, ULTIMA_ARTEC_T14BR),
+	DVB_USB_DEV(ASUS, ASUS_U3000),
+	DVB_USB_DEV(ASUS, ASUS_U3100),
+	DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_STICK_3),
+	DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_MYTV_T),
+	DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_HT_USB_XE),
+	DVB_USB_DEV(PINNACLE, PINNACLE_EXPRESSCARD_320CX),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV72E),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV73E),
+	DVB_USB_DEV(YUAN, YUAN_EC372S),
+	DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_HT_EXPRESS),
+	DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_T_XXS),
+	DVB_USB_DEV(LEADTEK, LEADTEK_WINFAST_DTV_DONGLE_STK7700P_2),
+	DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_TD_STICK_52009),
+	DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_500_3),
+	DVB_USB_DEV(GIGABYTE, GIGABYTE_U8000),
+	DVB_USB_DEV(YUAN, YUAN_STK7700PH),
+	DVB_USB_DEV(ASUS, ASUS_U3000H),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV801E),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV801E_SE),
+	DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_T_EXPRESS),
+	DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_DT_XS_DIVERSITY_2),
+	DVB_USB_DEV(SONY, SONY_PLAYTV),
+	DVB_USB_DEV(YUAN, YUAN_PD378S),
+	DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_TIGER_ATSC),
+	DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_TIGER_ATSC_B210),
+	DVB_USB_DEV(YUAN, YUAN_MC770),
+	DVB_USB_DEV(ELGATO, ELGATO_EYETV_DTT),
+	DVB_USB_DEV(ELGATO, ELGATO_EYETV_DTT_Dlx),
+	DVB_USB_DEV(LEADTEK, LEADTEK_WINFAST_DTV_DONGLE_H),
+	DVB_USB_DEV(TERRATEC, TERRATEC_T3),
+	DVB_USB_DEV(TERRATEC, TERRATEC_T5),
+	DVB_USB_DEV(YUAN, YUAN_STK7700D),
+	DVB_USB_DEV(YUAN, YUAN_STK7700D_2),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV73A),
+	DVB_USB_DEV(PCTV, PCTV_PINNACLE_PCTV73ESE),
+	DVB_USB_DEV(PCTV, PCTV_PINNACLE_PCTV282E),
+	DVB_USB_DEV(DIBCOM, DIBCOM_STK7770P),
+	DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_T_XXS_2),
+	DVB_USB_DEV(DIBCOM, DIBCOM_STK807XPVR),
+	DVB_USB_DEV(DIBCOM, DIBCOM_STK807XP),
+	DVB_USB_DEV_VER(PIXELVIEW, PIXELVIEW_SBTVD, 0x000, 0x3f00),
+	DVB_USB_DEV(EVOLUTEPC, EVOLUTEPC_TVWAY_PLUS),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV73ESE),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV282E),
+	DVB_USB_DEV(DIBCOM, DIBCOM_STK8096GP),
+	DVB_USB_DEV(ELGATO, ELGATO_EYETV_DIVERSITY),
+	DVB_USB_DEV(DIBCOM, DIBCOM_NIM9090M),
+	DVB_USB_DEV(DIBCOM, DIBCOM_NIM8096MD),
+	DVB_USB_DEV(DIBCOM, DIBCOM_NIM9090MD),
+	DVB_USB_DEV(DIBCOM, DIBCOM_NIM7090),
+	DVB_USB_DEV(DIBCOM, DIBCOM_TFE7090PVR),
+	DVB_USB_DEV(TECHNISAT, TECHNISAT_AIRSTAR_TELESTICK_2),
+	DVB_USB_DEV(MEDION, MEDION_CREATIX_CTX1921),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV340E),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV340E_SE),
+	DVB_USB_DEV(DIBCOM, DIBCOM_TFE7790P),
+	DVB_USB_DEV(DIBCOM, DIBCOM_TFE8096P),
+	DVB_USB_DEV(ELGATO, ELGATO_EYETV_DTT_2),
+	DVB_USB_DEV(PCTV, PCTV_2002E),
+	DVB_USB_DEV(PCTV, PCTV_2002E_SE),
+	DVB_USB_DEV(PCTV, PCTV_DIBCOM_STK8096PVR),
+	DVB_USB_DEV(DIBCOM, DIBCOM_STK8096PVR),
+	DVB_USB_DEV(HAMA, HAMA_DVBT_HYBRID),
+	DVB_USB_DEV(MICROSOFT, MICROSOFT_XBOX_ONE_TUNER),
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
+
+#define DIB0700_DEFAULT_DEVICE_PROPERTIES \
+	.caps              = DVB_USB_IS_AN_I2C_ADAPTER, \
+	.usb_ctrl          = DEVICE_SPECIFIC, \
+	.firmware          = "dvb-usb-dib0700-1.20.fw", \
+	.download_firmware = dib0700_download_firmware, \
+	.no_reconnect      = 1, \
+	.size_of_priv      = sizeof(struct dib0700_state), \
+	.i2c_algo          = &dib0700_i2c_algo, \
+	.identify_state    = dib0700_identify_state
+
+#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
+	.streaming_ctrl   = dib0700_streaming_ctrl, \
+	.stream = { \
+		.type = USB_BULK, \
+		.count = 4, \
+		.endpoint = ep, \
+		.u = { \
+			.bulk = { \
+				.buffersize = 39480, \
+			} \
+		} \
+	}
+
+#define DIB0700_NUM_FRONTENDS(n) \
+	.num_frontends = n, \
+	.size_of_priv     = sizeof(struct dib0700_adapter_state)
+
+struct dvb_usb_device_properties dib0700_devices[] = {
+	{
+		DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk7700p_pid_filter,
+				.pid_filter_ctrl  = stk7700p_pid_filter_ctrl,
+				.frontend_attach  = stk7700p_frontend_attach,
+				.tuner_attach     = stk7700p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 8,
+		.devices = {
+			{   "DiBcom STK7700P reference design",
+				{ &dib0700_usb_id_table[DIBCOM_STK7700P], &dib0700_usb_id_table[DIBCOM_STK7700P_PC] },
+				{ NULL },
+			},
+			{   "Hauppauge Nova-T Stick",
+				{ &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_STICK], &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_STICK_2], NULL },
+				{ NULL },
+			},
+			{   "AVerMedia AVerTV DVB-T Volar",
+				{ &dib0700_usb_id_table[AVERMEDIA_VOLAR], &dib0700_usb_id_table[AVERMEDIA_VOLAR_2] },
+				{ NULL },
+			},
+			{   "Compro Videomate U500",
+				{ &dib0700_usb_id_table[COMPRO_VIDEOMATE_U500], &dib0700_usb_id_table[COMPRO_VIDEOMATE_U500_PC] },
+				{ NULL },
+			},
+			{   "Uniwill STK7700P based (Hama and others)",
+				{ &dib0700_usb_id_table[UNIWILL_STK7700P], NULL },
+				{ NULL },
+			},
+			{   "Leadtek Winfast DTV Dongle (STK7700P based)",
+				{ &dib0700_usb_id_table[LEADTEK_WINFAST_DTV_DONGLE_STK7700P], &dib0700_usb_id_table[LEADTEK_WINFAST_DTV_DONGLE_STK7700P_2] },
+				{ NULL },
+			},
+			{   "AVerMedia AVerTV DVB-T Express",
+				{ &dib0700_usb_id_table[AVERMEDIA_EXPRESS] },
+				{ NULL },
+			},
+			{   "Gigabyte U7000",
+				{ &dib0700_usb_id_table[GIGABYTE_U7000], NULL },
+				{ NULL },
+			}
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.frontend_attach  = bristol_frontend_attach,
+				.tuner_attach     = bristol_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			}, {
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.frontend_attach  = bristol_frontend_attach,
+				.tuner_attach     = bristol_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+			}
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "Hauppauge Nova-T 500 Dual DVB-T",
+				{ &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_500], &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_500_2], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7700d_frontend_attach,
+				.tuner_attach     = stk7700d_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			}, {
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7700d_frontend_attach,
+				.tuner_attach     = stk7700d_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+			}
+		},
+
+		.num_device_descs = 5,
+		.devices = {
+			{   "Pinnacle PCTV 2000e",
+				{ &dib0700_usb_id_table[PINNACLE_PCTV2000E], NULL },
+				{ NULL },
+			},
+			{   "Terratec Cinergy DT XS Diversity",
+				{ &dib0700_usb_id_table[TERRATEC_CINERGY_DT_XS_DIVERSITY], NULL },
+				{ NULL },
+			},
+			{   "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
+				{ &dib0700_usb_id_table[HAUPPAUGE_NOVA_TD_STICK], NULL },
+				{ NULL },
+			},
+			{   "DiBcom STK7700D reference design",
+				{ &dib0700_usb_id_table[DIBCOM_STK7700D], NULL },
+				{ NULL },
+			},
+			{   "YUAN High-Tech DiBcom STK7700D",
+				{ &dib0700_usb_id_table[YUAN_STK7700D_2], NULL },
+				{ NULL },
+			},
+
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7700P2_frontend_attach,
+				.tuner_attach     = stk7700d_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 3,
+		.devices = {
+			{   "ASUS My Cinema U3000 Mini DVBT Tuner",
+				{ &dib0700_usb_id_table[ASUS_U3000], NULL },
+				{ NULL },
+			},
+			{   "Yuan EC372S",
+				{ &dib0700_usb_id_table[YUAN_EC372S], NULL },
+				{ NULL },
+			},
+			{   "Terratec Cinergy T Express",
+				{ &dib0700_usb_id_table[TERRATEC_CINERGY_T_EXPRESS], NULL },
+				{ NULL },
+			}
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 12,
+		.devices = {
+			{   "DiBcom STK7070P reference design",
+				{ &dib0700_usb_id_table[DIBCOM_STK7070P], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV DVB-T Flash Stick",
+				{ &dib0700_usb_id_table[PINNACLE_PCTV_DVB_T_FLASH], NULL },
+				{ NULL },
+			},
+			{   "Artec T14BR DVB-T",
+				{ &dib0700_usb_id_table[ULTIMA_ARTEC_T14BR], NULL },
+				{ NULL },
+			},
+			{   "ASUS My Cinema U3100 Mini DVBT Tuner",
+				{ &dib0700_usb_id_table[ASUS_U3100], NULL },
+				{ NULL },
+			},
+			{   "Hauppauge Nova-T Stick",
+				{ &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_STICK_3], NULL },
+				{ NULL },
+			},
+			{   "Hauppauge Nova-T MyTV.t",
+				{ &dib0700_usb_id_table[HAUPPAUGE_MYTV_T], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 72e",
+				{ &dib0700_usb_id_table[PINNACLE_PCTV72E], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 73e",
+				{ &dib0700_usb_id_table[PINNACLE_PCTV73E], NULL },
+				{ NULL },
+			},
+			{   "Elgato EyeTV DTT",
+				{ &dib0700_usb_id_table[ELGATO_EYETV_DTT], NULL },
+				{ NULL },
+			},
+			{   "Yuan PD378S",
+				{ &dib0700_usb_id_table[YUAN_PD378S], NULL },
+				{ NULL },
+			},
+			{   "Elgato EyeTV Dtt Dlx PD378S",
+				{ &dib0700_usb_id_table[ELGATO_EYETV_DTT_Dlx], NULL },
+				{ NULL },
+			},
+			{   "Elgato EyeTV DTT rev. 2",
+				{ &dib0700_usb_id_table[ELGATO_EYETV_DTT_2], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 3,
+		.devices = {
+			{   "Pinnacle PCTV 73A",
+				{ &dib0700_usb_id_table[PINNACLE_PCTV73A], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 73e SE",
+				{ &dib0700_usb_id_table[PCTV_PINNACLE_PCTV73ESE], &dib0700_usb_id_table[PINNACLE_PCTV73ESE], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 282e",
+				{ &dib0700_usb_id_table[PCTV_PINNACLE_PCTV282E], &dib0700_usb_id_table[PINNACLE_PCTV282E], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = novatd_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			}, {
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = novatd_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+			}
+		},
+
+		.num_device_descs = 3,
+		.devices = {
+			{   "Hauppauge Nova-TD Stick (52009)",
+				{ &dib0700_usb_id_table[HAUPPAUGE_NOVA_TD_STICK_52009], NULL },
+				{ NULL },
+			},
+			{   "PCTV 2002e",
+				{ &dib0700_usb_id_table[PCTV_2002E], NULL },
+				{ NULL },
+			},
+			{   "PCTV 2002e SE",
+				{ &dib0700_usb_id_table[PCTV_2002E_SE], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070pd_frontend_attach0,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			}, {
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070pd_frontend_attach1,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+			}
+		},
+
+		.num_device_descs = 5,
+		.devices = {
+			{   "DiBcom STK7070PD reference design",
+				{ &dib0700_usb_id_table[DIBCOM_STK7070PD], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV Dual DVB-T Diversity Stick",
+				{ &dib0700_usb_id_table[PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T], NULL },
+				{ NULL },
+			},
+			{   "Hauppauge Nova-TD-500 (84xxx)",
+				{ &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_500_3], NULL },
+				{ NULL },
+			},
+			{  "Terratec Cinergy DT USB XS Diversity/ T5",
+				{ &dib0700_usb_id_table[TERRATEC_CINERGY_DT_XS_DIVERSITY_2],
+					&dib0700_usb_id_table[TERRATEC_T5], NULL},
+				{ NULL },
+			},
+			{  "Sony PlayTV",
+				{ &dib0700_usb_id_table[SONY_PLAYTV], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070pd_frontend_attach0,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			}, {
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070pd_frontend_attach1,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+			}
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "Elgato EyeTV Diversity",
+				{ &dib0700_usb_id_table[ELGATO_EYETV_DIVERSITY], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7700ph_frontend_attach,
+				.tuner_attach     = stk7700ph_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 10,
+		.devices = {
+			{   "Terratec Cinergy HT USB XE",
+				{ &dib0700_usb_id_table[TERRATEC_CINERGY_HT_USB_XE], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle Expresscard 320cx",
+				{ &dib0700_usb_id_table[PINNACLE_EXPRESSCARD_320CX], NULL },
+				{ NULL },
+			},
+			{   "Terratec Cinergy HT Express",
+				{ &dib0700_usb_id_table[TERRATEC_CINERGY_HT_EXPRESS], NULL },
+				{ NULL },
+			},
+			{   "Gigabyte U8000-RH",
+				{ &dib0700_usb_id_table[GIGABYTE_U8000], NULL },
+				{ NULL },
+			},
+			{   "YUAN High-Tech STK7700PH",
+				{ &dib0700_usb_id_table[YUAN_STK7700PH], NULL },
+				{ NULL },
+			},
+			{   "Asus My Cinema-U3000Hybrid",
+				{ &dib0700_usb_id_table[ASUS_U3000H], NULL },
+				{ NULL },
+			},
+			{   "YUAN High-Tech MC770",
+				{ &dib0700_usb_id_table[YUAN_MC770], NULL },
+				{ NULL },
+			},
+			{   "Leadtek WinFast DTV Dongle H",
+				{ &dib0700_usb_id_table[LEADTEK_WINFAST_DTV_DONGLE_H], NULL },
+				{ NULL },
+			},
+			{   "YUAN High-Tech STK7700D",
+				{ &dib0700_usb_id_table[YUAN_STK7700D], NULL },
+				{ NULL },
+			},
+			{   "Hama DVB=T Hybrid USB Stick",
+				{ &dib0700_usb_id_table[HAMA_DVBT_HYBRID], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.frontend_attach  = s5h1411_frontend_attach,
+				.tuner_attach     = xc5000_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "Pinnacle PCTV HD Pro USB Stick",
+				{ &dib0700_usb_id_table[PINNACLE_PCTV801E], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV HD USB Stick",
+				{ &dib0700_usb_id_table[PINNACLE_PCTV801E_SE], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.frontend_attach  = lgdt3305_frontend_attach,
+				.tuner_attach     = mxl5007t_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "Hauppauge ATSC MiniCard (B200)",
+				{ &dib0700_usb_id_table[HAUPPAUGE_TIGER_ATSC], NULL },
+				{ NULL },
+			},
+			{   "Hauppauge ATSC MiniCard (B210)",
+				{ &dib0700_usb_id_table[HAUPPAUGE_TIGER_ATSC_B210], NULL },
+				{ NULL },
+			},
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7770p_frontend_attach,
+				.tuner_attach     = dib7770p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 4,
+		.devices = {
+			{   "DiBcom STK7770P reference design",
+				{ &dib0700_usb_id_table[DIBCOM_STK7770P], NULL },
+				{ NULL },
+			},
+			{   "Terratec Cinergy T USB XXS (HD)/ T3",
+				{ &dib0700_usb_id_table[TERRATEC_CINERGY_T_XXS],
+					&dib0700_usb_id_table[TERRATEC_T3],
+					&dib0700_usb_id_table[TERRATEC_CINERGY_T_XXS_2], NULL},
+				{ NULL },
+			},
+			{   "TechniSat AirStar TeleStick 2",
+				{ &dib0700_usb_id_table[TECHNISAT_AIRSTAR_TELESTICK_2], NULL },
+				{ NULL },
+			},
+			{   "Medion CTX1921 DVB-T USB",
+				{ &dib0700_usb_id_table[MEDION_CREATIX_CTX1921], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+				.frontend_attach  = stk807x_frontend_attach,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 3,
+		.devices = {
+			{   "DiBcom STK807xP reference design",
+				{ &dib0700_usb_id_table[DIBCOM_STK807XP], NULL },
+				{ NULL },
+			},
+			{   "Prolink Pixelview SBTVD",
+				{ &dib0700_usb_id_table[PIXELVIEW_SBTVD], NULL },
+				{ NULL },
+			},
+			{   "EvolutePC TVWay+",
+				{ &dib0700_usb_id_table[EVOLUTEPC_TVWAY_PLUS], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 2,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+				.frontend_attach  = stk807xpvr_frontend_attach0,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+				.frontend_attach  = stk807xpvr_frontend_attach1,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK807xPVR reference design",
+				{ &dib0700_usb_id_table[DIBCOM_STK807XPVR], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+				.frontend_attach  = stk809x_frontend_attach,
+				.tuner_attach     = dib809x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK8096GP reference design",
+				{ &dib0700_usb_id_table[DIBCOM_STK8096GP], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = dib90x0_pid_filter,
+				.pid_filter_ctrl = dib90x0_pid_filter_ctrl,
+				.frontend_attach  = stk9090m_frontend_attach,
+				.tuner_attach     = dib9090_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK9090M reference design",
+				{ &dib0700_usb_id_table[DIBCOM_NIM9090M], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+				.frontend_attach  = nim8096md_frontend_attach,
+				.tuner_attach     = nim8096md_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom NIM8096MD reference design",
+				{ &dib0700_usb_id_table[DIBCOM_NIM8096MD], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = dib90x0_pid_filter,
+				.pid_filter_ctrl = dib90x0_pid_filter_ctrl,
+				.frontend_attach  = nim9090md_frontend_attach,
+				.tuner_attach     = nim9090md_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom NIM9090MD reference design",
+				{ &dib0700_usb_id_table[DIBCOM_NIM9090MD], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk70x0p_pid_filter,
+				.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = nim7090_frontend_attach,
+				.tuner_attach     = nim7090_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom NIM7090 reference design",
+				{ &dib0700_usb_id_table[DIBCOM_NIM7090], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 2,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk70x0p_pid_filter,
+				.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = tfe7090pvr_frontend0_attach,
+				.tuner_attach     = tfe7090pvr_tuner0_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+			},
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk70x0p_pid_filter,
+				.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = tfe7090pvr_frontend1_attach,
+				.tuner_attach     = tfe7090pvr_tuner1_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom TFE7090PVR reference design",
+				{ &dib0700_usb_id_table[DIBCOM_TFE7090PVR], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			DIB0700_NUM_FRONTENDS(1),
+			.fe = {{
+				.frontend_attach  = pctv340e_frontend_attach,
+				.tuner_attach     = xc4000_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "Pinnacle PCTV 340e HD Pro USB Stick",
+				{ &dib0700_usb_id_table[PINNACLE_PCTV340E], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV Hybrid Stick Solo",
+				{ &dib0700_usb_id_table[PINNACLE_PCTV340E_SE], NULL },
+				{ NULL },
+			},
+		},
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				DIB0700_NUM_FRONTENDS(1),
+				.fe = {{
+					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+					.pid_filter_count = 32,
+					.pid_filter = stk70x0p_pid_filter,
+					.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+					.frontend_attach  = tfe7790p_frontend_attach,
+					.tuner_attach     = tfe7790p_tuner_attach,
+
+					DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+				} },
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom TFE7790P reference design",
+				{ &dib0700_usb_id_table[DIBCOM_TFE7790P], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				DIB0700_NUM_FRONTENDS(1),
+				.fe = {{
+					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+					.pid_filter_count = 32,
+					.pid_filter = stk80xx_pid_filter,
+					.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+					.frontend_attach  = tfe8096p_frontend_attach,
+					.tuner_attach     = tfe8096p_tuner_attach,
+
+					DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				} },
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom TFE8096P reference design",
+				{ &dib0700_usb_id_table[DIBCOM_TFE8096P], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+					    RC_PROTO_BIT_RC6_MCE |
+					    RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 2,
+		.adapter = {
+			{
+				.num_frontends = 1,
+				.fe = {{
+					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+					.pid_filter_count = 32,
+					.pid_filter = stk80xx_pid_filter,
+					.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+					.frontend_attach  = stk809x_frontend_attach,
+					.tuner_attach     = dib809x_tuner_attach,
+
+					DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+				} },
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			}, {
+				.num_frontends = 1,
+				.fe = { {
+					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+					.pid_filter_count = 32,
+					.pid_filter = stk80xx_pid_filter,
+					.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+					.frontend_attach  = stk809x_frontend1_attach,
+					.tuner_attach     = dib809x_tuner_attach,
+
+					DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+				} },
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK8096-PVR reference design",
+				{ &dib0700_usb_id_table[PCTV_DIBCOM_STK8096PVR],
+					&dib0700_usb_id_table[DIBCOM_STK8096PVR], NULL},
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_PROTO_BIT_RC5 |
+				RC_PROTO_BIT_RC6_MCE |
+				RC_PROTO_BIT_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				DIB0700_NUM_FRONTENDS(1),
+				.fe = {{
+					.frontend_attach = xbox_one_attach,
+
+					DIB0700_DEFAULT_STREAMING_CONFIG(0x82),
+				} },
+			},
+		},
+		.num_device_descs = 1,
+		.devices = {
+			{ "Microsoft Xbox One Digital TV Tuner",
+				{ &dib0700_usb_id_table[MICROSOFT_XBOX_ONE_TUNER], NULL },
+				{ NULL },
+			},
+		},
+	},
+};
+
+int dib0700_device_count = ARRAY_SIZE(dib0700_devices);