Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1057 insertions, 0 deletions

diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
new file mode 100644
index 0000000000..2b9105295f
--- /dev/null
+++ b/drivers/mfd/tps65010.c
@@ -0,0 +1,1057 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * tps65010 - driver for tps6501x power management chips
+ *
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004-2005 David Brownell
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/tps65010.h>
+
+#include <linux/gpio/driver.h>
+
+
+/*-------------------------------------------------------------------------*/
+
+#define	DRIVER_VERSION	"2 May 2005"
+#define	DRIVER_NAME	(tps65010_driver.driver.name)
+
+MODULE_DESCRIPTION("TPS6501x Power Management Driver");
+MODULE_LICENSE("GPL");
+
+static struct i2c_driver tps65010_driver;
+
+/*-------------------------------------------------------------------------*/
+
+/* This driver handles a family of multipurpose chips, which incorporate
+ * voltage regulators, lithium ion/polymer battery charging, GPIOs, LEDs,
+ * and other features often needed in portable devices like cell phones
+ * or digital cameras.
+ *
+ * The tps65011 and tps65013 have different voltage settings compared
+ * to tps65010 and tps65012.  The tps65013 has a NO_CHG status/irq.
+ * All except tps65010 have "wait" mode, possibly defaulted so that
+ * battery-insert != device-on.
+ *
+ * We could distinguish between some models by checking VDCDC1.UVLO or
+ * other registers, unless they've been changed already after powerup
+ * as part of board setup by a bootloader.
+ */
+enum tps_model {
+	TPS65010,
+	TPS65011,
+	TPS65012,
+	TPS65013,
+};
+
+struct tps65010 {
+	struct i2c_client	*client;
+	struct mutex		lock;
+	struct delayed_work	work;
+	struct dentry		*file;
+	unsigned		charging:1;
+	unsigned		por:1;
+	unsigned		model:8;
+	u16			vbus;
+	unsigned long		flags;
+#define	FLAG_VBUS_CHANGED	0
+#define	FLAG_IRQ_ENABLE		1
+
+	/* copies of last register state */
+	u8			chgstatus, regstatus, chgconf;
+	u8			nmask1, nmask2;
+
+	u8			outmask;
+	struct gpio_chip	chip;
+	struct platform_device	*leds;
+};
+
+#define	POWER_POLL_DELAY	msecs_to_jiffies(5000)
+
+/*-------------------------------------------------------------------------*/
+
+#if	defined(DEBUG) || defined(CONFIG_DEBUG_FS)
+
+static void dbg_chgstat(char *buf, size_t len, u8 chgstatus)
+{
+	snprintf(buf, len, "%02x%s%s%s%s%s%s%s%s\n",
+		chgstatus,
+		(chgstatus & TPS_CHG_USB) ? " USB" : "",
+		(chgstatus & TPS_CHG_AC) ? " AC" : "",
+		(chgstatus & TPS_CHG_THERM) ? " therm" : "",
+		(chgstatus & TPS_CHG_TERM) ? " done" :
+			((chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+				? " (charging)" : ""),
+		(chgstatus & TPS_CHG_TAPER_TMO) ? " taper_tmo" : "",
+		(chgstatus & TPS_CHG_CHG_TMO) ? " charge_tmo" : "",
+		(chgstatus & TPS_CHG_PRECHG_TMO) ? " prechg_tmo" : "",
+		(chgstatus & TPS_CHG_TEMP_ERR) ? " temp_err" : "");
+}
+
+static void dbg_regstat(char *buf, size_t len, u8 regstatus)
+{
+	snprintf(buf, len, "%02x %s%s%s%s%s%s%s%s\n",
+		regstatus,
+		(regstatus & TPS_REG_ONOFF) ? "off" : "(on)",
+		(regstatus & TPS_REG_COVER) ? " uncover" : "",
+		(regstatus & TPS_REG_UVLO) ? " UVLO" : "",
+		(regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "",
+		(regstatus & TPS_REG_PG_LD02) ? " ld02_bad" : "",
+		(regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "",
+		(regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "",
+		(regstatus & TPS_REG_PG_CORE) ? " core_bad" : "");
+}
+
+static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig)
+{
+	const char *hibit;
+
+	if (por)
+		hibit = (chgconfig & TPS_CHARGE_POR)
+				? "POR=69ms" : "POR=1sec";
+	else
+		hibit = (chgconfig & TPS65013_AUA) ? "AUA" : "";
+
+	snprintf(buf, len, "%02x %s%s%s AC=%d%% USB=%dmA %sCharge\n",
+		chgconfig, hibit,
+		(chgconfig & TPS_CHARGE_RESET) ? " reset" : "",
+		(chgconfig & TPS_CHARGE_FAST) ? " fast" : "",
+		({int p; switch ((chgconfig >> 3) & 3) {
+		case 3:		p = 100; break;
+		case 2:		p = 75; break;
+		case 1:		p = 50; break;
+		default:	p = 25; break;
+		}; p; }),
+		(chgconfig & TPS_VBUS_CHARGING)
+			? ((chgconfig & TPS_VBUS_500MA) ? 500 : 100)
+			: 0,
+		(chgconfig & TPS_CHARGE_ENABLE) ? "" : "No");
+}
+
+#endif
+
+#ifdef	DEBUG
+
+static void show_chgstatus(const char *label, u8 chgstatus)
+{
+	char buf [100];
+
+	dbg_chgstat(buf, sizeof buf, chgstatus);
+	pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+static void show_regstatus(const char *label, u8 regstatus)
+{
+	char buf [100];
+
+	dbg_regstat(buf, sizeof buf, regstatus);
+	pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+static void show_chgconfig(int por, const char *label, u8 chgconfig)
+{
+	char buf [100];
+
+	dbg_chgconf(por, buf, sizeof buf, chgconfig);
+	pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+#else
+
+static inline void show_chgstatus(const char *label, u8 chgstatus) { }
+static inline void show_regstatus(const char *label, u8 chgstatus) { }
+static inline void show_chgconfig(int por, const char *label, u8 chgconfig) { }
+
+#endif
+
+#ifdef	CONFIG_DEBUG_FS
+
+static int dbg_show(struct seq_file *s, void *_)
+{
+	struct tps65010	*tps = s->private;
+	u8		value, v2;
+	unsigned	i;
+	char		buf[100];
+	const char	*chip;
+
+	switch (tps->model) {
+	case TPS65010:	chip = "tps65010"; break;
+	case TPS65011:	chip = "tps65011"; break;
+	case TPS65012:	chip = "tps65012"; break;
+	case TPS65013:	chip = "tps65013"; break;
+	default:	chip = NULL; break;
+	}
+	seq_printf(s, "driver  %s\nversion %s\nchip    %s\n\n",
+			DRIVER_NAME, DRIVER_VERSION, chip);
+
+	mutex_lock(&tps->lock);
+
+	/* FIXME how can we tell whether a battery is present?
+	 * likely involves a charge gauging chip (like BQ26501).
+	 */
+
+	seq_printf(s, "%scharging\n\n", tps->charging ? "" : "(not) ");
+
+
+	/* registers for monitoring battery charging and status; note
+	 * that reading chgstat and regstat may ack IRQs...
+	 */
+	value = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
+	dbg_chgconf(tps->por, buf, sizeof buf, value);
+	seq_printf(s, "chgconfig %s", buf);
+
+	value = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
+	dbg_chgstat(buf, sizeof buf, value);
+	seq_printf(s, "chgstat   %s", buf);
+	value = i2c_smbus_read_byte_data(tps->client, TPS_MASK1);
+	dbg_chgstat(buf, sizeof buf, value);
+	seq_printf(s, "mask1     %s", buf);
+	/* ignore ackint1 */
+
+	value = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
+	dbg_regstat(buf, sizeof buf, value);
+	seq_printf(s, "regstat   %s", buf);
+	value = i2c_smbus_read_byte_data(tps->client, TPS_MASK2);
+	dbg_regstat(buf, sizeof buf, value);
+	seq_printf(s, "mask2     %s\n", buf);
+	/* ignore ackint2 */
+
+	queue_delayed_work(system_power_efficient_wq, &tps->work,
+			   POWER_POLL_DELAY);
+
+	/* VMAIN voltage, enable lowpower, etc */
+	value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC1);
+	seq_printf(s, "vdcdc1    %02x\n", value);
+
+	/* VCORE voltage, vibrator on/off */
+	value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC2);
+	seq_printf(s, "vdcdc2    %02x\n", value);
+
+	/* both LD0s, and their lowpower behavior */
+	value = i2c_smbus_read_byte_data(tps->client, TPS_VREGS1);
+	seq_printf(s, "vregs1    %02x\n\n", value);
+
+
+	/* LEDs and GPIOs */
+	value = i2c_smbus_read_byte_data(tps->client, TPS_LED1_ON);
+	v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED1_PER);
+	seq_printf(s, "led1 %s, on=%02x, per=%02x, %d/%d msec\n",
+		(value & 0x80)
+			? ((v2 & 0x80) ? "on" : "off")
+			: ((v2 & 0x80) ? "blink" : "(nPG)"),
+		value, v2,
+		(value & 0x7f) * 10, (v2 & 0x7f) * 100);
+
+	value = i2c_smbus_read_byte_data(tps->client, TPS_LED2_ON);
+	v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED2_PER);
+	seq_printf(s, "led2 %s, on=%02x, per=%02x, %d/%d msec\n",
+		(value & 0x80)
+			? ((v2 & 0x80) ? "on" : "off")
+			: ((v2 & 0x80) ? "blink" : "off"),
+		value, v2,
+		(value & 0x7f) * 10, (v2 & 0x7f) * 100);
+
+	value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
+	v2 = i2c_smbus_read_byte_data(tps->client, TPS_MASK3);
+	seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2);
+
+	for (i = 0; i < 4; i++) {
+		if (value & (1 << (4 + i)))
+			seq_printf(s, "  gpio%d-out %s\n", i + 1,
+				(value & (1 << i)) ? "low" : "hi ");
+		else
+			seq_printf(s, "  gpio%d-in  %s %s %s\n", i + 1,
+				(value & (1 << i)) ? "hi " : "low",
+				(v2 & (1 << i)) ? "no-irq" : "irq",
+				(v2 & (1 << (4 + i))) ? "rising" : "falling");
+	}
+
+	mutex_unlock(&tps->lock);
+	return 0;
+}
+
+static int dbg_tps_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dbg_show, inode->i_private);
+}
+
+static const struct file_operations debug_fops = {
+	.open		= dbg_tps_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+#define	DEBUG_FOPS	&debug_fops
+
+#else
+#define	DEBUG_FOPS	NULL
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* handle IRQS in a task context, so we can use I2C calls */
+static void tps65010_interrupt(struct tps65010 *tps)
+{
+	u8 tmp = 0, mask, poll;
+
+	/* IRQs won't trigger for certain events, but we can get
+	 * others by polling (normally, with external power applied).
+	 */
+	poll = 0;
+
+	/* regstatus irqs */
+	if (tps->nmask2) {
+		tmp = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
+		mask = tmp ^ tps->regstatus;
+		tps->regstatus = tmp;
+		mask &= tps->nmask2;
+	} else
+		mask = 0;
+	if (mask) {
+		tps->regstatus =  tmp;
+		/* may need to shut something down ... */
+
+		/* "off" usually means deep sleep */
+		if (tmp & TPS_REG_ONOFF) {
+			pr_info("%s: power off button\n", DRIVER_NAME);
+#if 0
+			/* REVISIT:  this might need its own workqueue
+			 * plus tweaks including deadlock avoidance ...
+			 * also needs to get error handling and probably
+			 * an #ifdef CONFIG_HIBERNATION
+			 */
+			hibernate();
+#endif
+			poll = 1;
+		}
+	}
+
+	/* chgstatus irqs */
+	if (tps->nmask1) {
+		tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
+		mask = tmp ^ tps->chgstatus;
+		tps->chgstatus = tmp;
+		mask &= tps->nmask1;
+	} else
+		mask = 0;
+	if (mask) {
+		unsigned	charging = 0;
+
+		show_chgstatus("chg/irq", tmp);
+		if (tmp & (TPS_CHG_USB|TPS_CHG_AC))
+			show_chgconfig(tps->por, "conf", tps->chgconf);
+
+		/* Unless it was turned off or disabled, we charge any
+		 * battery whenever there's power available for it
+		 * and the charger hasn't been disabled.
+		 */
+		if (!(tps->chgstatus & ~(TPS_CHG_USB|TPS_CHG_AC))
+				&& (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+				&& (tps->chgconf & TPS_CHARGE_ENABLE)
+				) {
+			if (tps->chgstatus & TPS_CHG_USB) {
+				/* VBUS options are readonly until reconnect */
+				if (mask & TPS_CHG_USB)
+					set_bit(FLAG_VBUS_CHANGED, &tps->flags);
+				charging = 1;
+			} else if (tps->chgstatus & TPS_CHG_AC)
+				charging = 1;
+		}
+		if (charging != tps->charging) {
+			tps->charging = charging;
+			pr_info("%s: battery %scharging\n",
+				DRIVER_NAME, charging ? "" :
+				((tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+					? "NOT " : "dis"));
+		}
+	}
+
+	/* always poll to detect (a) power removal, without tps65013
+	 * NO_CHG IRQ; or (b) restart of charging after stop.
+	 */
+	if ((tps->model != TPS65013 || !tps->charging)
+			&& (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)))
+		poll = 1;
+	if (poll)
+		queue_delayed_work(system_power_efficient_wq, &tps->work,
+				   POWER_POLL_DELAY);
+
+	/* also potentially gpio-in rise or fall */
+}
+
+/* handle IRQs and polling using keventd for now */
+static void tps65010_work(struct work_struct *work)
+{
+	struct tps65010		*tps;
+
+	tps = container_of(to_delayed_work(work), struct tps65010, work);
+	mutex_lock(&tps->lock);
+
+	tps65010_interrupt(tps);
+
+	if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) {
+		u8	chgconfig, tmp;
+
+		chgconfig = i2c_smbus_read_byte_data(tps->client,
+					TPS_CHGCONFIG);
+		chgconfig &= ~(TPS_VBUS_500MA | TPS_VBUS_CHARGING);
+		if (tps->vbus == 500)
+			chgconfig |= TPS_VBUS_500MA | TPS_VBUS_CHARGING;
+		else if (tps->vbus >= 100)
+			chgconfig |= TPS_VBUS_CHARGING;
+
+		i2c_smbus_write_byte_data(tps->client,
+					  TPS_CHGCONFIG, chgconfig);
+
+		/* vbus update fails unless VBUS is connected! */
+		tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
+		tps->chgconf = tmp;
+		show_chgconfig(tps->por, "update vbus", tmp);
+	}
+
+	if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
+		enable_irq(tps->client->irq);
+
+	mutex_unlock(&tps->lock);
+}
+
+static irqreturn_t tps65010_irq(int irq, void *_tps)
+{
+	struct tps65010		*tps = _tps;
+
+	disable_irq_nosync(irq);
+	set_bit(FLAG_IRQ_ENABLE, &tps->flags);
+	queue_delayed_work(system_power_efficient_wq, &tps->work, 0);
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* offsets 0..3 == GPIO1..GPIO4
+ * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes)
+ * offset 6 == vibrator motor driver
+ */
+static void
+tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (offset < 4)
+		tps65010_set_gpio_out_value(offset + 1, value);
+	else if (offset < 6)
+		tps65010_set_led(offset - 3, value ? ON : OFF);
+	else
+		tps65010_set_vib(value);
+}
+
+static int
+tps65010_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	/* GPIOs may be input-only */
+	if (offset < 4) {
+		struct tps65010		*tps;
+
+		tps = gpiochip_get_data(chip);
+		if (!(tps->outmask & (1 << offset)))
+			return -EINVAL;
+		tps65010_set_gpio_out_value(offset + 1, value);
+	} else if (offset < 6)
+		tps65010_set_led(offset - 3, value ? ON : OFF);
+	else
+		tps65010_set_vib(value);
+
+	return 0;
+}
+
+static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	int			value;
+	struct tps65010		*tps;
+
+	tps = gpiochip_get_data(chip);
+
+	if (offset < 4) {
+		value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
+		if (value < 0)
+			return value;
+		if (value & (1 << (offset + 4)))	/* output */
+			return !(value & (1 << offset));
+		else					/* input */
+			return !!(value & (1 << offset));
+	}
+
+	/* REVISIT we *could* report LED1/nPG and LED2 state ... */
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct tps65010 *the_tps;
+
+static void tps65010_remove(struct i2c_client *client)
+{
+	struct tps65010		*tps = i2c_get_clientdata(client);
+	struct tps65010_board	*board = dev_get_platdata(&client->dev);
+
+	if (board && board->teardown)
+		board->teardown(client, &tps->chip);
+	if (client->irq > 0)
+		free_irq(client->irq, tps);
+	cancel_delayed_work_sync(&tps->work);
+	debugfs_remove(tps->file);
+	the_tps = NULL;
+}
+
+static int tps65010_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct tps65010		*tps;
+	int			status;
+	struct tps65010_board	*board = dev_get_platdata(&client->dev);
+
+	if (the_tps) {
+		dev_dbg(&client->dev, "only one tps6501x chip allowed\n");
+		return -ENODEV;
+	}
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EINVAL;
+
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	mutex_init(&tps->lock);
+	INIT_DELAYED_WORK(&tps->work, tps65010_work);
+	tps->client = client;
+	tps->model = id->driver_data;
+
+	/* the IRQ is active low, but many gpio lines can't support that
+	 * so this driver uses falling-edge triggers instead.
+	 */
+	if (client->irq > 0) {
+		status = request_irq(client->irq, tps65010_irq,
+				     IRQF_TRIGGER_FALLING, DRIVER_NAME, tps);
+		if (status < 0) {
+			dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
+					client->irq, status);
+			return status;
+		}
+		/* annoying race here, ideally we'd have an option
+		 * to claim the irq now and enable it later.
+		 * FIXME genirq IRQF_NOAUTOEN now solves that ...
+		 */
+		disable_irq(client->irq);
+		set_bit(FLAG_IRQ_ENABLE, &tps->flags);
+	} else
+		dev_warn(&client->dev, "IRQ not configured!\n");
+
+
+	switch (tps->model) {
+	case TPS65010:
+	case TPS65012:
+		tps->por = 1;
+		break;
+	/* else CHGCONFIG.POR is replaced by AUA, enabling a WAIT mode */
+	}
+	tps->chgconf = i2c_smbus_read_byte_data(client, TPS_CHGCONFIG);
+	show_chgconfig(tps->por, "conf/init", tps->chgconf);
+
+	show_chgstatus("chg/init",
+		i2c_smbus_read_byte_data(client, TPS_CHGSTATUS));
+	show_regstatus("reg/init",
+		i2c_smbus_read_byte_data(client, TPS_REGSTATUS));
+
+	pr_debug("%s: vdcdc1 0x%02x, vdcdc2 %02x, vregs1 %02x\n", DRIVER_NAME,
+		i2c_smbus_read_byte_data(client, TPS_VDCDC1),
+		i2c_smbus_read_byte_data(client, TPS_VDCDC2),
+		i2c_smbus_read_byte_data(client, TPS_VREGS1));
+	pr_debug("%s: defgpio 0x%02x, mask3 0x%02x\n", DRIVER_NAME,
+		i2c_smbus_read_byte_data(client, TPS_DEFGPIO),
+		i2c_smbus_read_byte_data(client, TPS_MASK3));
+
+	i2c_set_clientdata(client, tps);
+	the_tps = tps;
+
+#if	defined(CONFIG_USB_GADGET) && !defined(CONFIG_USB_OTG)
+	/* USB hosts can't draw VBUS.  OTG devices could, later
+	 * when OTG infrastructure enables it.  USB peripherals
+	 * could be relying on VBUS while booting, though.
+	 */
+	tps->vbus = 100;
+#endif
+
+	/* unmask the "interesting" irqs, then poll once to
+	 * kickstart monitoring, initialize shadowed status
+	 * registers, and maybe disable VBUS draw.
+	 */
+	tps->nmask1 = ~0;
+	(void) i2c_smbus_write_byte_data(client, TPS_MASK1, ~tps->nmask1);
+
+	tps->nmask2 = TPS_REG_ONOFF;
+	if (tps->model == TPS65013)
+		tps->nmask2 |= TPS_REG_NO_CHG;
+	(void) i2c_smbus_write_byte_data(client, TPS_MASK2, ~tps->nmask2);
+
+	(void) i2c_smbus_write_byte_data(client, TPS_MASK3, 0x0f
+		| i2c_smbus_read_byte_data(client, TPS_MASK3));
+
+	tps65010_work(&tps->work.work);
+
+	tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
+				tps, DEBUG_FOPS);
+
+	/* optionally register GPIOs */
+	if (board) {
+		tps->outmask = board->outmask;
+
+		tps->chip.label = client->name;
+		tps->chip.parent = &client->dev;
+		tps->chip.owner = THIS_MODULE;
+
+		tps->chip.set = tps65010_gpio_set;
+		tps->chip.direction_output = tps65010_output;
+
+		/* NOTE:  only partial support for inputs; nyet IRQs */
+		tps->chip.get = tps65010_gpio_get;
+
+		tps->chip.base = -1;
+		tps->chip.ngpio = 7;
+		tps->chip.can_sleep = 1;
+
+		status = gpiochip_add_data(&tps->chip, tps);
+		if (status < 0)
+			dev_err(&client->dev, "can't add gpiochip, err %d\n",
+					status);
+		else if (board->setup) {
+			status = board->setup(client, &tps->chip);
+			if (status < 0) {
+				dev_dbg(&client->dev,
+					"board %s %s err %d\n",
+					"setup", client->name, status);
+				status = 0;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id tps65010_id[] = {
+	{ "tps65010", TPS65010 },
+	{ "tps65011", TPS65011 },
+	{ "tps65012", TPS65012 },
+	{ "tps65013", TPS65013 },
+	{ "tps65014", TPS65011 },	/* tps65011 charging at 6.5V max */
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tps65010_id);
+
+static struct i2c_driver tps65010_driver = {
+	.driver = {
+		.name	= "tps65010",
+	},
+	.probe = tps65010_probe,
+	.remove	= tps65010_remove,
+	.id_table = tps65010_id,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Draw from VBUS:
+ *   0 mA -- DON'T DRAW (might supply power instead)
+ * 100 mA -- usb unit load (slowest charge rate)
+ * 500 mA -- usb high power (fast battery charge)
+ */
+int tps65010_set_vbus_draw(unsigned mA)
+{
+	unsigned long	flags;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	/* assumes non-SMP */
+	local_irq_save(flags);
+	if (mA >= 500)
+		mA = 500;
+	else if (mA >= 100)
+		mA = 100;
+	else
+		mA = 0;
+	the_tps->vbus = mA;
+	if ((the_tps->chgstatus & TPS_CHG_USB)
+			&& test_and_set_bit(
+				FLAG_VBUS_CHANGED, &the_tps->flags)) {
+		/* gadget drivers call this in_irq() */
+		queue_delayed_work(system_power_efficient_wq, &the_tps->work,
+				   0);
+	}
+	local_irq_restore(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(tps65010_set_vbus_draw);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_gpio_out_value parameter:
+ * gpio:  GPIO1, GPIO2, GPIO3 or GPIO4
+ * value: LOW or HIGH
+ */
+int tps65010_set_gpio_out_value(unsigned gpio, unsigned value)
+{
+	int	 status;
+	unsigned defgpio;
+
+	if (!the_tps)
+		return -ENODEV;
+	if ((gpio < GPIO1) || (gpio > GPIO4))
+		return -EINVAL;
+
+	mutex_lock(&the_tps->lock);
+
+	defgpio = i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO);
+
+	/* Configure GPIO for output */
+	defgpio |= 1 << (gpio + 3);
+
+	/* Writing 1 forces a logic 0 on that GPIO and vice versa */
+	switch (value) {
+	case LOW:
+		defgpio |= 1 << (gpio - 1);    /* set GPIO low by writing 1 */
+		break;
+	/* case HIGH: */
+	default:
+		defgpio &= ~(1 << (gpio - 1)); /* set GPIO high by writing 0 */
+		break;
+	}
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+		TPS_DEFGPIO, defgpio);
+
+	pr_debug("%s: gpio%dout = %s, defgpio 0x%02x\n", DRIVER_NAME,
+		gpio, value ? "high" : "low",
+		i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO));
+
+	mutex_unlock(&the_tps->lock);
+	return status;
+}
+EXPORT_SYMBOL(tps65010_set_gpio_out_value);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_led parameter:
+ * led:  LED1 or LED2
+ * mode: ON, OFF or BLINK
+ */
+int tps65010_set_led(unsigned led, unsigned mode)
+{
+	int	 status;
+	unsigned led_on, led_per, offs;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	if (led == LED1)
+		offs = 0;
+	else {
+		offs = 2;
+		led = LED2;
+	}
+
+	mutex_lock(&the_tps->lock);
+
+	pr_debug("%s: led%i_on   0x%02x\n", DRIVER_NAME, led,
+		i2c_smbus_read_byte_data(the_tps->client,
+				TPS_LED1_ON + offs));
+
+	pr_debug("%s: led%i_per  0x%02x\n", DRIVER_NAME, led,
+		i2c_smbus_read_byte_data(the_tps->client,
+				TPS_LED1_PER + offs));
+
+	switch (mode) {
+	case OFF:
+		led_on  = 1 << 7;
+		led_per = 0 << 7;
+		break;
+	case ON:
+		led_on  = 1 << 7;
+		led_per = 1 << 7;
+		break;
+	case BLINK:
+		led_on  = 0x30 | (0 << 7);
+		led_per = 0x08 | (1 << 7);
+		break;
+	default:
+		printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
+		       DRIVER_NAME);
+		mutex_unlock(&the_tps->lock);
+		return -EINVAL;
+	}
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_LED1_ON + offs, led_on);
+
+	if (status != 0) {
+		printk(KERN_ERR "%s: Failed to write led%i_on register\n",
+		       DRIVER_NAME, led);
+		mutex_unlock(&the_tps->lock);
+		return status;
+	}
+
+	pr_debug("%s: led%i_on   0x%02x\n", DRIVER_NAME, led,
+		i2c_smbus_read_byte_data(the_tps->client, TPS_LED1_ON + offs));
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_LED1_PER + offs, led_per);
+
+	if (status != 0) {
+		printk(KERN_ERR "%s: Failed to write led%i_per register\n",
+		       DRIVER_NAME, led);
+		mutex_unlock(&the_tps->lock);
+		return status;
+	}
+
+	pr_debug("%s: led%i_per  0x%02x\n", DRIVER_NAME, led,
+		i2c_smbus_read_byte_data(the_tps->client,
+				TPS_LED1_PER + offs));
+
+	mutex_unlock(&the_tps->lock);
+
+	return status;
+}
+EXPORT_SYMBOL(tps65010_set_led);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_vib parameter:
+ * value: ON or OFF
+ */
+int tps65010_set_vib(unsigned value)
+{
+	int	 status;
+	unsigned vdcdc2;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	mutex_lock(&the_tps->lock);
+
+	vdcdc2 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC2);
+	vdcdc2 &= ~(1 << 1);
+	if (value)
+		vdcdc2 |= (1 << 1);
+	status = i2c_smbus_write_byte_data(the_tps->client,
+		TPS_VDCDC2, vdcdc2);
+
+	pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off");
+
+	mutex_unlock(&the_tps->lock);
+	return status;
+}
+EXPORT_SYMBOL(tps65010_set_vib);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+int tps65010_set_low_pwr(unsigned mode)
+{
+	int	 status;
+	unsigned vdcdc1;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	mutex_lock(&the_tps->lock);
+
+	pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME,
+		mode ? "enable" : "disable",
+		i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+	vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
+
+	switch (mode) {
+	case OFF:
+		vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
+		break;
+	/* case ON: */
+	default:
+		vdcdc1 |= TPS_ENABLE_LP;  /* enable ENABLE_LP bit */
+		break;
+	}
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_VDCDC1, vdcdc1);
+
+	if (status != 0)
+		printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
+			DRIVER_NAME);
+	else
+		pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
+			i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+	mutex_unlock(&the_tps->lock);
+
+	return status;
+}
+EXPORT_SYMBOL(tps65010_set_low_pwr);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_config_vregs1 parameter:
+ * value to be written to VREGS1 register
+ * Note: The complete register is written, set all bits you need
+ */
+int tps65010_config_vregs1(unsigned value)
+{
+	int	 status;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	mutex_lock(&the_tps->lock);
+
+	pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
+			i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_VREGS1, value);
+
+	if (status != 0)
+		printk(KERN_ERR "%s: Failed to write vregs1 register\n",
+			DRIVER_NAME);
+	else
+		pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
+			i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
+
+	mutex_unlock(&the_tps->lock);
+
+	return status;
+}
+EXPORT_SYMBOL(tps65010_config_vregs1);
+
+int tps65010_config_vdcdc2(unsigned value)
+{
+	struct i2c_client *c;
+	int	 status;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	c = the_tps->client;
+	mutex_lock(&the_tps->lock);
+
+	pr_debug("%s: vdcdc2 0x%02x\n", DRIVER_NAME,
+		 i2c_smbus_read_byte_data(c, TPS_VDCDC2));
+
+	status = i2c_smbus_write_byte_data(c, TPS_VDCDC2, value);
+
+	if (status != 0)
+		printk(KERN_ERR "%s: Failed to write vdcdc2 register\n",
+			DRIVER_NAME);
+	else
+		pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
+			 i2c_smbus_read_byte_data(c, TPS_VDCDC2));
+
+	mutex_unlock(&the_tps->lock);
+	return status;
+}
+EXPORT_SYMBOL(tps65010_config_vdcdc2);
+
+/*-------------------------------------------------------------------------*/
+/* tps65013_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+
+/* FIXME: Assumes AC or USB power is present. Setting AUA bit is not
+	required if power supply is through a battery */
+
+int tps65013_set_low_pwr(unsigned mode)
+{
+	int	 status;
+	unsigned vdcdc1, chgconfig;
+
+	if (!the_tps || the_tps->por)
+		return -ENODEV;
+
+	mutex_lock(&the_tps->lock);
+
+	pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n",
+		DRIVER_NAME,
+		mode ? "enable" : "disable",
+		i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG),
+		i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+	chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
+	vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
+
+	switch (mode) {
+	case OFF:
+		chgconfig &= ~TPS65013_AUA; /* disable AUA bit */
+		vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
+		break;
+	/* case ON: */
+	default:
+		chgconfig |= TPS65013_AUA;  /* enable AUA bit */
+		vdcdc1 |= TPS_ENABLE_LP;  /* enable ENABLE_LP bit */
+		break;
+	}
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_CHGCONFIG, chgconfig);
+	if (status != 0) {
+		printk(KERN_ERR "%s: Failed to write chconfig register\n",
+	 DRIVER_NAME);
+		mutex_unlock(&the_tps->lock);
+		return status;
+	}
+
+	chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
+	the_tps->chgconf = chgconfig;
+	show_chgconfig(0, "chgconf", chgconfig);
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_VDCDC1, vdcdc1);
+
+	if (status != 0)
+		printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
+	 DRIVER_NAME);
+	else
+		pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
+			i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+	mutex_unlock(&the_tps->lock);
+
+	return status;
+}
+EXPORT_SYMBOL(tps65013_set_low_pwr);
+
+/*-------------------------------------------------------------------------*/
+
+static int __init tps_init(void)
+{
+	return i2c_add_driver(&tps65010_driver);
+}
+/* NOTE:  this MUST be initialized before the other parts of the system
+ * that rely on it ... but after the i2c bus on which this relies.
+ * That is, much earlier than on PC-type systems, which don't often use
+ * I2C as a core system bus.
+ */
+subsys_initcall(tps_init);
+
+static void __exit tps_exit(void)
+{
+	i2c_del_driver(&tps65010_driver);
+}
+module_exit(tps_exit);
+