Merging upstream version 6.10.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 132 insertions, 177 deletions

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index dba826db73..8199d96200 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -224,18 +224,6 @@ struct mci_slot_pdata {
 	bool			non_removable;
 };
 
-/**
- * struct mci_platform_data - board-specific MMC/SDcard configuration
- * @dma_slave: DMA slave interface to use in data transfers.
- * @dma_filter: Filtering function to filter the DMA channel
- * @slot: Per-slot configuration data.
- */
-struct mci_platform_data {
-	void			*dma_slave;
-	dma_filter_fn		dma_filter;
-	struct mci_slot_pdata	slot[ATMCI_MAX_NR_SLOTS];
-};
-
 struct atmel_mci_caps {
 	bool    has_dma_conf_reg;
 	bool    has_pdc;
@@ -300,7 +288,8 @@ struct atmel_mci_dma {
  *	rate and timeout calculations.
  * @mapbase: Physical address of the MMIO registers.
  * @mck: The peripheral bus clock hooked up to the MMC controller.
- * @pdev: Platform device associated with the MMC controller.
+ * @dev: Device associated with the MMC controller.
+ * @pdata: Per-slot configuration data.
  * @slot: Slots sharing this MMC controller.
  * @caps: MCI capabilities depending on MCI version.
  * @prepare_data: function to setup MCI before data transfer which
@@ -377,8 +366,9 @@ struct atmel_mci {
 	unsigned long		bus_hz;
 	unsigned long		mapbase;
 	struct clk		*mck;
-	struct platform_device	*pdev;
+	struct device		*dev;
 
+	struct mci_slot_pdata	pdata[ATMCI_MAX_NR_SLOTS];
 	struct atmel_mci_slot	*slot[ATMCI_MAX_NR_SLOTS];
 
 	struct atmel_mci_caps   caps;
@@ -530,6 +520,7 @@ static void atmci_show_status_reg(struct seq_file *s,
 static int atmci_regs_show(struct seq_file *s, void *v)
 {
 	struct atmel_mci	*host = s->private;
+	struct device		*dev = host->dev;
 	u32			*buf;
 	int			ret = 0;
 
@@ -538,7 +529,7 @@ static int atmci_regs_show(struct seq_file *s, void *v)
 	if (!buf)
 		return -ENOMEM;
 
-	pm_runtime_get_sync(&host->pdev->dev);
+	pm_runtime_get_sync(dev);
 
 	/*
 	 * Grab a more or less consistent snapshot. Note that we're
@@ -549,8 +540,8 @@ static int atmci_regs_show(struct seq_file *s, void *v)
 	memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
 	spin_unlock_bh(&host->lock);
 
-	pm_runtime_mark_last_busy(&host->pdev->dev);
-	pm_runtime_put_autosuspend(&host->pdev->dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
 
 	seq_printf(s, "MR:\t0x%08x%s%s ",
 			buf[ATMCI_MR / 4],
@@ -626,7 +617,6 @@ static void atmci_init_debugfs(struct atmel_mci_slot *slot)
 			   &host->completed_events);
 }
 
-#if defined(CONFIG_OF)
 static const struct of_device_id atmci_dt_ids[] = {
 	{ .compatible = "atmel,hsmci" },
 	{ /* sentinel */ }
@@ -634,79 +624,64 @@ static const struct of_device_id atmci_dt_ids[] = {
 
 MODULE_DEVICE_TABLE(of, atmci_dt_ids);
 
-static struct mci_platform_data*
-atmci_of_init(struct platform_device *pdev)
+static int atmci_of_init(struct atmel_mci *host)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = host->dev;
+	struct device_node *np = dev->of_node;
 	struct device_node *cnp;
-	struct mci_platform_data *pdata;
 	u32 slot_id;
 	int err;
 
-	if (!np) {
-		dev_err(&pdev->dev, "device node not found\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		return ERR_PTR(-ENOMEM);
+	if (!np)
+		return dev_err_probe(dev, -EINVAL, "device node not found\n");
 
 	for_each_child_of_node(np, cnp) {
 		if (of_property_read_u32(cnp, "reg", &slot_id)) {
-			dev_warn(&pdev->dev, "reg property is missing for %pOF\n",
-				 cnp);
+			dev_warn(dev, "reg property is missing for %pOF\n", cnp);
 			continue;
 		}
 
 		if (slot_id >= ATMCI_MAX_NR_SLOTS) {
-			dev_warn(&pdev->dev, "can't have more than %d slots\n",
+			dev_warn(dev, "can't have more than %d slots\n",
 			         ATMCI_MAX_NR_SLOTS);
 			of_node_put(cnp);
 			break;
 		}
 
 		if (of_property_read_u32(cnp, "bus-width",
-		                         &pdata->slot[slot_id].bus_width))
-			pdata->slot[slot_id].bus_width = 1;
+					 &host->pdata[slot_id].bus_width))
+			host->pdata[slot_id].bus_width = 1;
 
-		pdata->slot[slot_id].detect_pin =
-			devm_fwnode_gpiod_get(&pdev->dev, of_fwnode_handle(cnp),
+		host->pdata[slot_id].detect_pin =
+			devm_fwnode_gpiod_get(dev, of_fwnode_handle(cnp),
 					      "cd", GPIOD_IN, "cd-gpios");
-		err = PTR_ERR_OR_ZERO(pdata->slot[slot_id].detect_pin);
+		err = PTR_ERR_OR_ZERO(host->pdata[slot_id].detect_pin);
 		if (err) {
 			if (err != -ENOENT) {
 				of_node_put(cnp);
-				return ERR_PTR(err);
+				return err;
 			}
-			pdata->slot[slot_id].detect_pin = NULL;
+			host->pdata[slot_id].detect_pin = NULL;
 		}
 
-		pdata->slot[slot_id].non_removable =
+		host->pdata[slot_id].non_removable =
 			of_property_read_bool(cnp, "non-removable");
 
-		pdata->slot[slot_id].wp_pin =
-			devm_fwnode_gpiod_get(&pdev->dev, of_fwnode_handle(cnp),
+		host->pdata[slot_id].wp_pin =
+			devm_fwnode_gpiod_get(dev, of_fwnode_handle(cnp),
 					      "wp", GPIOD_IN, "wp-gpios");
-		err = PTR_ERR_OR_ZERO(pdata->slot[slot_id].wp_pin);
+		err = PTR_ERR_OR_ZERO(host->pdata[slot_id].wp_pin);
 		if (err) {
 			if (err != -ENOENT) {
 				of_node_put(cnp);
-				return ERR_PTR(err);
+				return err;
 			}
-			pdata->slot[slot_id].wp_pin = NULL;
+			host->pdata[slot_id].wp_pin = NULL;
 		}
 	}
 
-	return pdata;
-}
-#else /* CONFIG_OF */
-static inline struct mci_platform_data*
-atmci_of_init(struct platform_device *dev)
-{
-	return ERR_PTR(-EINVAL);
+	return 0;
 }
-#endif
 
 static inline unsigned int atmci_get_version(struct atmel_mci *host)
 {
@@ -738,11 +713,10 @@ static inline unsigned int atmci_convert_chksize(struct atmel_mci *host,
 
 static void atmci_timeout_timer(struct timer_list *t)
 {
-	struct atmel_mci *host;
+	struct atmel_mci *host = from_timer(host, t, timer);
+	struct device *dev = host->dev;
 
-	host = from_timer(host, t, timer);
-
-	dev_dbg(&host->pdev->dev, "software timeout\n");
+	dev_dbg(dev, "software timeout\n");
 
 	if (host->mrq->cmd->data) {
 		host->mrq->cmd->data->error = -ETIMEDOUT;
@@ -860,15 +834,14 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
 static void atmci_send_command(struct atmel_mci *host,
 		struct mmc_command *cmd, u32 cmd_flags)
 {
+	struct device *dev = host->dev;
 	unsigned int timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
 		ATMCI_CMD_TIMEOUT_MS;
 
 	WARN_ON(host->cmd);
 	host->cmd = cmd;
 
-	dev_vdbg(&host->pdev->dev,
-			"start command: ARGR=0x%08x CMDR=0x%08x\n",
-			cmd->arg, cmd_flags);
+	dev_vdbg(dev, "start command: ARGR=0x%08x CMDR=0x%08x\n", cmd->arg, cmd_flags);
 
 	atmci_writel(host, ATMCI_ARGR, cmd->arg);
 	atmci_writel(host, ATMCI_CMDR, cmd_flags);
@@ -878,7 +851,9 @@ static void atmci_send_command(struct atmel_mci *host,
 
 static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
 {
-	dev_dbg(&host->pdev->dev, "send stop command\n");
+	struct device *dev = host->dev;
+
+	dev_dbg(dev, "send stop command\n");
 	atmci_send_command(host, data->stop, host->stop_cmdr);
 	atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
 }
@@ -951,11 +926,10 @@ static void atmci_pdc_set_both_buf(struct atmel_mci *host, int dir)
 static void atmci_pdc_cleanup(struct atmel_mci *host)
 {
 	struct mmc_data         *data = host->data;
+	struct device		*dev = host->dev;
 
 	if (data)
-		dma_unmap_sg(&host->pdev->dev,
-				data->sg, data->sg_len,
-				mmc_get_dma_dir(data));
+		dma_unmap_sg(dev, data->sg, data->sg_len, mmc_get_dma_dir(data));
 }
 
 /*
@@ -965,6 +939,7 @@ static void atmci_pdc_cleanup(struct atmel_mci *host)
  */
 static void atmci_pdc_complete(struct atmel_mci *host)
 {
+	struct device *dev = host->dev;
 	int transfer_size = host->data->blocks * host->data->blksz;
 	int i;
 
@@ -981,7 +956,7 @@ static void atmci_pdc_complete(struct atmel_mci *host)
 
 	atmci_pdc_cleanup(host);
 
-	dev_dbg(&host->pdev->dev, "(%s) set pending xfer complete\n", __func__);
+	dev_dbg(dev, "(%s) set pending xfer complete\n", __func__);
 	atmci_set_pending(host, EVENT_XFER_COMPLETE);
 	tasklet_schedule(&host->tasklet);
 }
@@ -1003,8 +978,9 @@ static void atmci_dma_complete(void *arg)
 {
 	struct atmel_mci	*host = arg;
 	struct mmc_data		*data = host->data;
+	struct device		*dev = host->dev;
 
-	dev_vdbg(&host->pdev->dev, "DMA complete\n");
+	dev_vdbg(dev, "DMA complete\n");
 
 	if (host->caps.has_dma_conf_reg)
 		/* Disable DMA hardware handshaking on MCI */
@@ -1017,8 +993,7 @@ static void atmci_dma_complete(void *arg)
 	 * to send the stop command or waiting for NBUSY in this case.
 	 */
 	if (data) {
-		dev_dbg(&host->pdev->dev,
-		        "(%s) set pending xfer complete\n", __func__);
+		dev_dbg(dev, "(%s) set pending xfer complete\n", __func__);
 		atmci_set_pending(host, EVENT_XFER_COMPLETE);
 		tasklet_schedule(&host->tasklet);
 
@@ -1092,6 +1067,7 @@ static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data)
 static u32
 atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data)
 {
+	struct device *dev = host->dev;
 	u32 iflags, tmp;
 	int i;
 
@@ -1117,8 +1093,7 @@ atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data)
 
 	/* Configure PDC */
 	host->data_size = data->blocks * data->blksz;
-	dma_map_sg(&host->pdev->dev, data->sg, data->sg_len,
-		   mmc_get_dma_dir(data));
+	dma_map_sg(dev, data->sg, data->sg_len, mmc_get_dma_dir(data));
 
 	if ((!host->caps.has_rwproof)
 	    && (host->data->flags & MMC_DATA_WRITE)) {
@@ -1244,8 +1219,9 @@ atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
 
 static void atmci_stop_transfer(struct atmel_mci *host)
 {
-	dev_dbg(&host->pdev->dev,
-	        "(%s) set pending xfer complete\n", __func__);
+	struct device *dev = host->dev;
+
+	dev_dbg(dev, "(%s) set pending xfer complete\n", __func__);
 	atmci_set_pending(host, EVENT_XFER_COMPLETE);
 	atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
 }
@@ -1261,14 +1237,14 @@ static void atmci_stop_transfer_pdc(struct atmel_mci *host)
 static void atmci_stop_transfer_dma(struct atmel_mci *host)
 {
 	struct dma_chan *chan = host->data_chan;
+	struct device *dev = host->dev;
 
 	if (chan) {
 		dmaengine_terminate_all(chan);
 		atmci_dma_cleanup(host);
 	} else {
 		/* Data transfer was stopped by the interrupt handler */
-		dev_dbg(&host->pdev->dev,
-		        "(%s) set pending xfer complete\n", __func__);
+		dev_dbg(dev, "(%s) set pending xfer complete\n", __func__);
 		atmci_set_pending(host, EVENT_XFER_COMPLETE);
 		atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
 	}
@@ -1281,6 +1257,7 @@ static void atmci_stop_transfer_dma(struct atmel_mci *host)
 static void atmci_start_request(struct atmel_mci *host,
 		struct atmel_mci_slot *slot)
 {
+	struct device		*dev = host->dev;
 	struct mmc_request	*mrq;
 	struct mmc_command	*cmd;
 	struct mmc_data		*data;
@@ -1296,7 +1273,7 @@ static void atmci_start_request(struct atmel_mci *host,
 	host->cmd_status = 0;
 	host->data_status = 0;
 
-	dev_dbg(&host->pdev->dev, "start request: cmd %u\n", mrq->cmd->opcode);
+	dev_dbg(dev, "start request: cmd %u\n", mrq->cmd->opcode);
 
 	if (host->need_reset || host->caps.need_reset_after_xfer) {
 		iflags = atmci_readl(host, ATMCI_IMR);
@@ -1375,6 +1352,8 @@ static void atmci_start_request(struct atmel_mci *host,
 static void atmci_queue_request(struct atmel_mci *host,
 		struct atmel_mci_slot *slot, struct mmc_request *mrq)
 {
+	struct device *dev = host->dev;
+
 	dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
 			host->state);
 
@@ -1384,7 +1363,7 @@ static void atmci_queue_request(struct atmel_mci *host,
 		host->state = STATE_SENDING_CMD;
 		atmci_start_request(host, slot);
 	} else {
-		dev_dbg(&host->pdev->dev, "queue request\n");
+		dev_dbg(dev, "queue request\n");
 		list_add_tail(&slot->queue_node, &host->queue);
 	}
 	spin_unlock_bh(&host->lock);
@@ -1394,10 +1373,11 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 {
 	struct atmel_mci_slot	*slot = mmc_priv(mmc);
 	struct atmel_mci	*host = slot->host;
+	struct device		*dev = host->dev;
 	struct mmc_data		*data;
 
 	WARN_ON(slot->mrq);
-	dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode);
+	dev_dbg(dev, "MRQ: cmd %u\n", mrq->cmd->opcode);
 
 	/*
 	 * We may "know" the card is gone even though there's still an
@@ -1607,6 +1587,7 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
 {
 	struct atmel_mci_slot	*slot = NULL;
 	struct mmc_host		*prev_mmc = host->cur_slot->mmc;
+	struct device		*dev = host->dev;
 
 	WARN_ON(host->cmd || host->data);
 
@@ -1629,12 +1610,11 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
 		slot = list_entry(host->queue.next,
 				struct atmel_mci_slot, queue_node);
 		list_del(&slot->queue_node);
-		dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n",
-				mmc_hostname(slot->mmc));
+		dev_vdbg(dev, "list not empty: %s is next\n", mmc_hostname(slot->mmc));
 		host->state = STATE_SENDING_CMD;
 		atmci_start_request(host, slot);
 	} else {
-		dev_vdbg(&host->pdev->dev, "list empty\n");
+		dev_vdbg(dev, "list empty\n");
 		host->state = STATE_IDLE;
 	}
 
@@ -1770,6 +1750,7 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
 	struct atmel_mci        *host = from_tasklet(host, t, tasklet);
 	struct mmc_request	*mrq = host->mrq;
 	struct mmc_data		*data = host->data;
+	struct device		*dev = host->dev;
 	enum atmel_mci_state	state = host->state;
 	enum atmel_mci_state	prev_state;
 	u32			status;
@@ -1778,14 +1759,13 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
 
 	state = host->state;
 
-	dev_vdbg(&host->pdev->dev,
-		"tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
+	dev_vdbg(dev, "tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
 		state, host->pending_events, host->completed_events,
 		atmci_readl(host, ATMCI_IMR));
 
 	do {
 		prev_state = state;
-		dev_dbg(&host->pdev->dev, "FSM: state=%d\n", state);
+		dev_dbg(dev, "FSM: state=%d\n", state);
 
 		switch (state) {
 		case STATE_IDLE:
@@ -1798,18 +1778,17 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
 			 * END_REQUEST by default, WAITING_NOTBUSY if it's a
 			 * command needing it or DATA_XFER if there is data.
 			 */
-			dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n");
+			dev_dbg(dev, "FSM: cmd ready?\n");
 			if (!atmci_test_and_clear_pending(host,
 						EVENT_CMD_RDY))
 				break;
 
-			dev_dbg(&host->pdev->dev, "set completed cmd ready\n");
+			dev_dbg(dev, "set completed cmd ready\n");
 			host->cmd = NULL;
 			atmci_set_completed(host, EVENT_CMD_RDY);
 			atmci_command_complete(host, mrq->cmd);
 			if (mrq->data) {
-				dev_dbg(&host->pdev->dev,
-				        "command with data transfer");
+				dev_dbg(dev, "command with data transfer\n");
 				/*
 				 * If there is a command error don't start
 				 * data transfer.
@@ -1824,8 +1803,7 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
 				} else
 					state = STATE_DATA_XFER;
 			} else if ((!mrq->data) && (mrq->cmd->flags & MMC_RSP_BUSY)) {
-				dev_dbg(&host->pdev->dev,
-				        "command response need waiting notbusy");
+				dev_dbg(dev, "command response need waiting notbusy\n");
 				atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
 				state = STATE_WAITING_NOTBUSY;
 			} else
@@ -1836,7 +1814,7 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
 		case STATE_DATA_XFER:
 			if (atmci_test_and_clear_pending(host,
 						EVENT_DATA_ERROR)) {
-				dev_dbg(&host->pdev->dev, "set completed data error\n");
+				dev_dbg(dev, "set completed data error\n");
 				atmci_set_completed(host, EVENT_DATA_ERROR);
 				state = STATE_END_REQUEST;
 				break;
@@ -1849,14 +1827,12 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
 			 * to the next step which is WAITING_NOTBUSY in write
 			 * case and directly SENDING_STOP in read case.
 			 */
-			dev_dbg(&host->pdev->dev, "FSM: xfer complete?\n");
+			dev_dbg(dev, "FSM: xfer complete?\n");
 			if (!atmci_test_and_clear_pending(host,
 						EVENT_XFER_COMPLETE))
 				break;
 
-			dev_dbg(&host->pdev->dev,
-			        "(%s) set completed xfer complete\n",
-				__func__);
+			dev_dbg(dev, "(%s) set completed xfer complete\n", __func__);
 			atmci_set_completed(host, EVENT_XFER_COMPLETE);
 
 			if (host->caps.need_notbusy_for_read_ops ||
@@ -1881,12 +1857,12 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
 			 * included) or a write operation. In the latest case,
 			 * we need to send a stop command.
 			 */
-			dev_dbg(&host->pdev->dev, "FSM: not busy?\n");
+			dev_dbg(dev, "FSM: not busy?\n");
 			if (!atmci_test_and_clear_pending(host,
 						EVENT_NOTBUSY))
 				break;
 
-			dev_dbg(&host->pdev->dev, "set completed not busy\n");
+			dev_dbg(dev, "set completed not busy\n");
 			atmci_set_completed(host, EVENT_NOTBUSY);
 
 			if (host->data) {
@@ -1916,12 +1892,12 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
 			 * in order to go to the end request state instead of
 			 * sending stop again.
 			 */
-			dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n");
+			dev_dbg(dev, "FSM: cmd ready?\n");
 			if (!atmci_test_and_clear_pending(host,
 						EVENT_CMD_RDY))
 				break;
 
-			dev_dbg(&host->pdev->dev, "FSM: cmd ready\n");
+			dev_dbg(dev, "FSM: cmd ready\n");
 			host->cmd = NULL;
 			data->bytes_xfered = data->blocks * data->blksz;
 			data->error = 0;
@@ -2120,6 +2096,7 @@ static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status)
 static irqreturn_t atmci_interrupt(int irq, void *dev_id)
 {
 	struct atmel_mci	*host = dev_id;
+	struct device		*dev = host->dev;
 	u32			status, mask, pending;
 	unsigned int		pass_count = 0;
 
@@ -2131,21 +2108,21 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
 			break;
 
 		if (pending & ATMCI_DATA_ERROR_FLAGS) {
-			dev_dbg(&host->pdev->dev, "IRQ: data error\n");
+			dev_dbg(dev, "IRQ: data error\n");
 			atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS
 					| ATMCI_RXRDY | ATMCI_TXRDY
 					| ATMCI_ENDRX | ATMCI_ENDTX
 					| ATMCI_RXBUFF | ATMCI_TXBUFE);
 
 			host->data_status = status;
-			dev_dbg(&host->pdev->dev, "set pending data error\n");
+			dev_dbg(dev, "set pending data error\n");
 			smp_wmb();
 			atmci_set_pending(host, EVENT_DATA_ERROR);
 			tasklet_schedule(&host->tasklet);
 		}
 
 		if (pending & ATMCI_TXBUFE) {
-			dev_dbg(&host->pdev->dev, "IRQ: tx buffer empty\n");
+			dev_dbg(dev, "IRQ: tx buffer empty\n");
 			atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE);
 			atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
 			/*
@@ -2161,7 +2138,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
 				atmci_pdc_complete(host);
 			}
 		} else if (pending & ATMCI_ENDTX) {
-			dev_dbg(&host->pdev->dev, "IRQ: end of tx buffer\n");
+			dev_dbg(dev, "IRQ: end of tx buffer\n");
 			atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
 
 			if (host->data_size) {
@@ -2172,7 +2149,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
 		}
 
 		if (pending & ATMCI_RXBUFF) {
-			dev_dbg(&host->pdev->dev, "IRQ: rx buffer full\n");
+			dev_dbg(dev, "IRQ: rx buffer full\n");
 			atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF);
 			atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
 			/*
@@ -2188,7 +2165,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
 				atmci_pdc_complete(host);
 			}
 		} else if (pending & ATMCI_ENDRX) {
-			dev_dbg(&host->pdev->dev, "IRQ: end of rx buffer\n");
+			dev_dbg(dev, "IRQ: end of rx buffer\n");
 			atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
 
 			if (host->data_size) {
@@ -2205,19 +2182,19 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
 		 * The appropriate workaround is to use the BLKE signal.
 		 */
 		if (pending & ATMCI_BLKE) {
-			dev_dbg(&host->pdev->dev, "IRQ: blke\n");
+			dev_dbg(dev, "IRQ: blke\n");
 			atmci_writel(host, ATMCI_IDR, ATMCI_BLKE);
 			smp_wmb();
-			dev_dbg(&host->pdev->dev, "set pending notbusy\n");
+			dev_dbg(dev, "set pending notbusy\n");
 			atmci_set_pending(host, EVENT_NOTBUSY);
 			tasklet_schedule(&host->tasklet);
 		}
 
 		if (pending & ATMCI_NOTBUSY) {
-			dev_dbg(&host->pdev->dev, "IRQ: not_busy\n");
+			dev_dbg(dev, "IRQ: not_busy\n");
 			atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY);
 			smp_wmb();
-			dev_dbg(&host->pdev->dev, "set pending notbusy\n");
+			dev_dbg(dev, "set pending notbusy\n");
 			atmci_set_pending(host, EVENT_NOTBUSY);
 			tasklet_schedule(&host->tasklet);
 		}
@@ -2228,11 +2205,11 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
 			atmci_write_data_pio(host);
 
 		if (pending & ATMCI_CMDRDY) {
-			dev_dbg(&host->pdev->dev, "IRQ: cmd ready\n");
+			dev_dbg(dev, "IRQ: cmd ready\n");
 			atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY);
 			host->cmd_status = status;
 			smp_wmb();
-			dev_dbg(&host->pdev->dev, "set pending cmd rdy\n");
+			dev_dbg(dev, "set pending cmd rdy\n");
 			atmci_set_pending(host, EVENT_CMD_RDY);
 			tasklet_schedule(&host->tasklet);
 		}
@@ -2264,11 +2241,12 @@ static int atmci_init_slot(struct atmel_mci *host,
 		struct mci_slot_pdata *slot_data, unsigned int id,
 		u32 sdc_reg, u32 sdio_irq)
 {
+	struct device			*dev = host->dev;
 	struct mmc_host			*mmc;
 	struct atmel_mci_slot		*slot;
 	int ret;
 
-	mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev);
+	mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), dev);
 	if (!mmc)
 		return -ENOMEM;
 
@@ -2387,29 +2365,13 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
 
 static int atmci_configure_dma(struct atmel_mci *host)
 {
-	host->dma.chan = dma_request_chan(&host->pdev->dev, "rxtx");
-
-	if (PTR_ERR(host->dma.chan) == -ENODEV) {
-		struct mci_platform_data *pdata = host->pdev->dev.platform_data;
-		dma_cap_mask_t mask;
-
-		if (!pdata || !pdata->dma_filter)
-			return -ENODEV;
-
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-
-		host->dma.chan = dma_request_channel(mask, pdata->dma_filter,
-						     pdata->dma_slave);
-		if (!host->dma.chan)
-			host->dma.chan = ERR_PTR(-ENODEV);
-	}
+	struct device *dev = host->dev;
 
+	host->dma.chan = dma_request_chan(dev, "rxtx");
 	if (IS_ERR(host->dma.chan))
 		return PTR_ERR(host->dma.chan);
 
-	dev_info(&host->pdev->dev, "using %s for DMA transfers\n",
-		 dma_chan_name(host->dma.chan));
+	dev_info(dev, "using %s for DMA transfers\n", dma_chan_name(host->dma.chan));
 
 	host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
 	host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -2429,11 +2391,11 @@ static int atmci_configure_dma(struct atmel_mci *host)
  */
 static void atmci_get_cap(struct atmel_mci *host)
 {
+	struct device *dev = host->dev;
 	unsigned int version;
 
 	version = atmci_get_version(host);
-	dev_info(&host->pdev->dev,
-			"version: 0x%x\n", version);
+	dev_info(dev, "version: 0x%x\n", version);
 
 	host->caps.has_dma_conf_reg = false;
 	host->caps.has_pdc = true;
@@ -2474,15 +2436,14 @@ static void atmci_get_cap(struct atmel_mci *host)
 		break;
 	default:
 		host->caps.has_pdc = false;
-		dev_warn(&host->pdev->dev,
-				"Unmanaged mci version, set minimum capabilities\n");
+		dev_warn(dev, "Unmanaged mci version, set minimum capabilities\n");
 		break;
 	}
 }
 
 static int atmci_probe(struct platform_device *pdev)
 {
-	struct mci_platform_data	*pdata;
+	struct device			*dev = &pdev->dev;
 	struct atmel_mci		*host;
 	struct resource			*regs;
 	unsigned int			nr_slots;
@@ -2492,32 +2453,28 @@ static int atmci_probe(struct platform_device *pdev)
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!regs)
 		return -ENXIO;
-	pdata = pdev->dev.platform_data;
-	if (!pdata) {
-		pdata = atmci_of_init(pdev);
-		if (IS_ERR(pdata)) {
-			dev_err(&pdev->dev, "platform data not available\n");
-			return PTR_ERR(pdata);
-		}
-	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
 
-	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
 	if (!host)
 		return -ENOMEM;
 
-	host->pdev = pdev;
+	host->dev = dev;
 	spin_lock_init(&host->lock);
 	INIT_LIST_HEAD(&host->queue);
 
-	host->mck = devm_clk_get(&pdev->dev, "mci_clk");
+	ret = atmci_of_init(host);
+	if (ret)
+		return dev_err_probe(dev, ret, "Slot information not available\n");
+
+	host->mck = devm_clk_get(dev, "mci_clk");
 	if (IS_ERR(host->mck))
 		return PTR_ERR(host->mck);
 
-	host->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
+	host->regs = devm_ioremap(dev, regs->start, resource_size(regs));
 	if (!host->regs)
 		return -ENOMEM;
 
@@ -2532,7 +2489,7 @@ static int atmci_probe(struct platform_device *pdev)
 
 	tasklet_setup(&host->tasklet, atmci_tasklet_func);
 
-	ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host);
+	ret = request_irq(irq, atmci_interrupt, 0, dev_name(dev), host);
 	if (ret) {
 		clk_disable_unprepare(host->mck);
 		return ret;
@@ -2548,12 +2505,12 @@ static int atmci_probe(struct platform_device *pdev)
 		host->submit_data = &atmci_submit_data_dma;
 		host->stop_transfer = &atmci_stop_transfer_dma;
 	} else if (host->caps.has_pdc) {
-		dev_info(&pdev->dev, "using PDC\n");
+		dev_info(dev, "using PDC\n");
 		host->prepare_data = &atmci_prepare_data_pdc;
 		host->submit_data = &atmci_submit_data_pdc;
 		host->stop_transfer = &atmci_stop_transfer_pdc;
 	} else {
-		dev_info(&pdev->dev, "using PIO\n");
+		dev_info(dev, "using PIO\n");
 		host->prepare_data = &atmci_prepare_data;
 		host->submit_data = &atmci_submit_data;
 		host->stop_transfer = &atmci_stop_transfer;
@@ -2563,25 +2520,25 @@ static int atmci_probe(struct platform_device *pdev)
 
 	timer_setup(&host->timer, atmci_timeout_timer, 0);
 
-	pm_runtime_get_noresume(&pdev->dev);
-	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_DELAY);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_set_autosuspend_delay(dev, AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_enable(dev);
 
 	/* We need at least one slot to succeed */
 	nr_slots = 0;
 	ret = -ENODEV;
-	if (pdata->slot[0].bus_width) {
-		ret = atmci_init_slot(host, &pdata->slot[0],
+	if (host->pdata[0].bus_width) {
+		ret = atmci_init_slot(host, &host->pdata[0],
 				0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA);
 		if (!ret) {
 			nr_slots++;
 			host->buf_size = host->slot[0]->mmc->max_req_size;
 		}
 	}
-	if (pdata->slot[1].bus_width) {
-		ret = atmci_init_slot(host, &pdata->slot[1],
+	if (host->pdata[1].bus_width) {
+		ret = atmci_init_slot(host, &host->pdata[1],
 				1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB);
 		if (!ret) {
 			nr_slots++;
@@ -2592,27 +2549,25 @@ static int atmci_probe(struct platform_device *pdev)
 	}
 
 	if (!nr_slots) {
-		dev_err(&pdev->dev, "init failed: no slot defined\n");
+		dev_err_probe(dev, ret, "init failed: no slot defined\n");
 		goto err_init_slot;
 	}
 
 	if (!host->caps.has_rwproof) {
-		host->buffer = dma_alloc_coherent(&pdev->dev, host->buf_size,
+		host->buffer = dma_alloc_coherent(dev, host->buf_size,
 		                                  &host->buf_phys_addr,
 						  GFP_KERNEL);
 		if (!host->buffer) {
-			ret = -ENOMEM;
-			dev_err(&pdev->dev, "buffer allocation failed\n");
+			ret = dev_err_probe(dev, -ENOMEM, "buffer allocation failed\n");
 			goto err_dma_alloc;
 		}
 	}
 
-	dev_info(&pdev->dev,
-			"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
-			host->mapbase, irq, nr_slots);
+	dev_info(dev, "Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
+		 host->mapbase, irq, nr_slots);
 
-	pm_runtime_mark_last_busy(&host->pdev->dev);
-	pm_runtime_put_autosuspend(&pdev->dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
 
 	return 0;
 
@@ -2624,8 +2579,8 @@ err_dma_alloc:
 err_init_slot:
 	clk_disable_unprepare(host->mck);
 
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
 
 	del_timer_sync(&host->timer);
 	if (!IS_ERR(host->dma.chan))
@@ -2638,13 +2593,13 @@ err_dma_probe_defer:
 static void atmci_remove(struct platform_device *pdev)
 {
 	struct atmel_mci	*host = platform_get_drvdata(pdev);
+	struct device		*dev = &pdev->dev;
 	unsigned int		i;
 
-	pm_runtime_get_sync(&pdev->dev);
+	pm_runtime_get_sync(dev);
 
 	if (host->buffer)
-		dma_free_coherent(&pdev->dev, host->buf_size,
-		                  host->buffer, host->buf_phys_addr);
+		dma_free_coherent(dev, host->buf_size, host->buffer, host->buf_phys_addr);
 
 	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
 		if (host->slot[i])
@@ -2663,8 +2618,8 @@ static void atmci_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(host->mck);
 
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
 }
 
 #ifdef CONFIG_PM
@@ -2701,7 +2656,7 @@ static struct platform_driver atmci_driver = {
 	.driver		= {
 		.name		= "atmel_mci",
 		.probe_type	= PROBE_PREFER_ASYNCHRONOUS,
-		.of_match_table	= of_match_ptr(atmci_dt_ids),
+		.of_match_table	= atmci_dt_ids,
 		.pm		= &atmci_dev_pm_ops,
 	},
 };