Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 251 insertions, 0 deletions

diff --git a/drivers/mmc/host/dw_mmc-hi3798mv200.c b/drivers/mmc/host/dw_mmc-hi3798mv200.c
new file mode 100644
index 0000000000..989ae8dda7
--- /dev/null
+++ b/drivers/mmc/host/dw_mmc-hi3798mv200.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Modified from dw_mmc-hi3798cv200.c
+ *
+ * Copyright (c) 2024 Yang Xiwen <forbidden405@outlook.com>
+ * Copyright (c) 2018 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+
+#define SDMMC_TUNING_CTRL	0x118
+#define SDMMC_TUNING_FIND_EDGE	BIT(5)
+
+#define ALL_INT_CLR		0x1ffff
+
+/* DLL ctrl reg */
+#define SAP_DLL_CTRL_DLLMODE	BIT(16)
+
+struct dw_mci_hi3798mv200_priv {
+	struct clk *sample_clk;
+	struct clk *drive_clk;
+	struct regmap *crg_reg;
+	u32 sap_dll_offset;
+	struct mmc_clk_phase_map phase_map;
+};
+
+static void dw_mci_hi3798mv200_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+	struct dw_mci_hi3798mv200_priv *priv = host->priv;
+	struct mmc_clk_phase phase = priv->phase_map.phase[ios->timing];
+	u32 val;
+
+	val = mci_readl(host, ENABLE_SHIFT);
+	if (ios->timing == MMC_TIMING_MMC_DDR52
+	    || ios->timing == MMC_TIMING_UHS_DDR50)
+		val |= SDMMC_ENABLE_PHASE;
+	else
+		val &= ~SDMMC_ENABLE_PHASE;
+	mci_writel(host, ENABLE_SHIFT, val);
+
+	val = mci_readl(host, DDR_REG);
+	if (ios->timing == MMC_TIMING_MMC_HS400)
+		val |= SDMMC_DDR_HS400;
+	else
+		val &= ~SDMMC_DDR_HS400;
+	mci_writel(host, DDR_REG, val);
+
+	if (clk_set_rate(host->ciu_clk, ios->clock))
+		dev_warn(host->dev, "Failed to set rate to %u\n", ios->clock);
+	else
+		/*
+		 * CLK_MUX_ROUND_NEAREST is enabled for this clock
+		 * The actual clock rate is not what we set, but a rounded value
+		 * so we should get the rate once again
+		 */
+		host->bus_hz = clk_get_rate(host->ciu_clk);
+
+	if (phase.valid) {
+		clk_set_phase(priv->drive_clk, phase.out_deg);
+		clk_set_phase(priv->sample_clk, phase.in_deg);
+	} else {
+		dev_warn(host->dev,
+			 "The phase entry for timing mode %d is missing in device tree.\n",
+			 ios->timing);
+	}
+}
+
+static inline int dw_mci_hi3798mv200_enable_tuning(struct dw_mci_slot *slot)
+{
+	struct dw_mci_hi3798mv200_priv *priv = slot->host->priv;
+
+	return regmap_clear_bits(priv->crg_reg, priv->sap_dll_offset, SAP_DLL_CTRL_DLLMODE);
+}
+
+static inline int dw_mci_hi3798mv200_disable_tuning(struct dw_mci_slot *slot)
+{
+	struct dw_mci_hi3798mv200_priv *priv = slot->host->priv;
+
+	return regmap_set_bits(priv->crg_reg, priv->sap_dll_offset, SAP_DLL_CTRL_DLLMODE);
+}
+
+static int dw_mci_hi3798mv200_execute_tuning_mix_mode(struct dw_mci_slot *slot,
+					     u32 opcode)
+{
+	static const int degrees[] = { 0, 45, 90, 135, 180, 225, 270, 315 };
+	struct dw_mci *host = slot->host;
+	struct dw_mci_hi3798mv200_priv *priv = host->priv;
+	int raise_point = -1, fall_point = -1, mid;
+	int err, prev_err = -1;
+	int found = 0;
+	int regval;
+	int i;
+	int ret;
+
+	ret = dw_mci_hi3798mv200_enable_tuning(slot);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(degrees); i++) {
+		clk_set_phase(priv->sample_clk, degrees[i]);
+		mci_writel(host, RINTSTS, ALL_INT_CLR);
+
+		/*
+		 * HiSilicon implemented a tuning mechanism.
+		 * It needs special interaction with the DLL.
+		 *
+		 * Treat edge(flip) found as an error too.
+		 */
+		err = mmc_send_tuning(slot->mmc, opcode, NULL);
+		regval = mci_readl(host, TUNING_CTRL);
+		if (err || (regval & SDMMC_TUNING_FIND_EDGE))
+			err = 1;
+		else
+			found = 1;
+
+		if (i > 0) {
+			if (err && !prev_err)
+				fall_point = i - 1;
+			if (!err && prev_err)
+				raise_point = i;
+		}
+
+		if (raise_point != -1 && fall_point != -1)
+			goto tuning_out;
+
+		prev_err = err;
+		err = 0;
+	}
+
+tuning_out:
+	ret = dw_mci_hi3798mv200_disable_tuning(slot);
+	if (ret < 0)
+		return ret;
+
+	if (found) {
+		if (raise_point == -1)
+			raise_point = 0;
+		if (fall_point == -1)
+			fall_point = ARRAY_SIZE(degrees) - 1;
+		if (fall_point < raise_point) {
+			if ((raise_point + fall_point) >
+			    (ARRAY_SIZE(degrees) - 1))
+				mid = fall_point / 2;
+			else
+				mid = (raise_point + ARRAY_SIZE(degrees) - 1) / 2;
+		} else {
+			mid = (raise_point + fall_point) / 2;
+		}
+
+		/*
+		 * We don't care what timing we are tuning for,
+		 * simply use the same phase for all timing needs tuning.
+		 */
+		priv->phase_map.phase[MMC_TIMING_MMC_HS200].in_deg = degrees[mid];
+		priv->phase_map.phase[MMC_TIMING_MMC_HS400].in_deg = degrees[mid];
+		priv->phase_map.phase[MMC_TIMING_UHS_SDR104].in_deg = degrees[mid];
+
+		clk_set_phase(priv->sample_clk, degrees[mid]);
+		dev_dbg(host->dev, "Tuning clk_sample[%d, %d], set[%d]\n",
+			raise_point, fall_point, degrees[mid]);
+		ret = 0;
+	} else {
+		dev_err(host->dev, "No valid clk_sample shift!\n");
+		ret = -EINVAL;
+	}
+
+	mci_writel(host, RINTSTS, ALL_INT_CLR);
+
+	return ret;
+}
+
+static int dw_mci_hi3798mv200_init(struct dw_mci *host)
+{
+	struct dw_mci_hi3798mv200_priv *priv;
+	struct device_node *np = host->dev->of_node;
+	int ret;
+
+	priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mmc_of_parse_clk_phase(host->dev, &priv->phase_map);
+
+	priv->sample_clk = devm_clk_get_enabled(host->dev, "ciu-sample");
+	if (IS_ERR(priv->sample_clk))
+		return dev_err_probe(host->dev, PTR_ERR(priv->sample_clk),
+				     "failed to get enabled ciu-sample clock\n");
+
+	priv->drive_clk = devm_clk_get_enabled(host->dev, "ciu-drive");
+	if (IS_ERR(priv->drive_clk))
+		return dev_err_probe(host->dev, PTR_ERR(priv->drive_clk),
+				     "failed to get enabled ciu-drive clock\n");
+
+	priv->crg_reg = syscon_regmap_lookup_by_phandle(np, "hisilicon,sap-dll-reg");
+	if (IS_ERR(priv->crg_reg))
+		return dev_err_probe(host->dev, PTR_ERR(priv->crg_reg),
+				     "failed to get CRG reg\n");
+
+	ret = of_property_read_u32_index(np, "hisilicon,sap-dll-reg", 1, &priv->sap_dll_offset);
+	if (ret)
+		return dev_err_probe(host->dev, ret, "failed to get sample DLL register offset\n");
+
+	host->priv = priv;
+	return 0;
+}
+
+static const struct dw_mci_drv_data hi3798mv200_data = {
+	.common_caps = MMC_CAP_CMD23,
+	.init = dw_mci_hi3798mv200_init,
+	.set_ios = dw_mci_hi3798mv200_set_ios,
+	.execute_tuning = dw_mci_hi3798mv200_execute_tuning_mix_mode,
+};
+
+static const struct of_device_id dw_mci_hi3798mv200_match[] = {
+	{ .compatible = "hisilicon,hi3798mv200-dw-mshc" },
+	{},
+};
+
+static int dw_mci_hi3798mv200_probe(struct platform_device *pdev)
+{
+	return dw_mci_pltfm_register(pdev, &hi3798mv200_data);
+}
+
+static void dw_mci_hi3798mv200_remove(struct platform_device *pdev)
+{
+	dw_mci_pltfm_remove(pdev);
+}
+
+MODULE_DEVICE_TABLE(of, dw_mci_hi3798mv200_match);
+static struct platform_driver dw_mci_hi3798mv200_driver = {
+	.probe = dw_mci_hi3798mv200_probe,
+	.remove_new = dw_mci_hi3798mv200_remove,
+	.driver = {
+		.name = "dwmmc_hi3798mv200",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.of_match_table = dw_mci_hi3798mv200_match,
+	},
+};
+module_platform_driver(dw_mci_hi3798mv200_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi3798MV200 Specific DW-MSHC Driver Extension");
+MODULE_LICENSE("GPL");