summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/ingenic
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/mtd/nand/raw/ingenic
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/mtd/nand/raw/ingenic')
-rw-r--r--drivers/mtd/nand/raw/ingenic/Kconfig45
-rw-r--r--drivers/mtd/nand/raw/ingenic/Makefile9
-rw-r--r--drivers/mtd/nand/raw/ingenic/ingenic_ecc.c159
-rw-r--r--drivers/mtd/nand/raw/ingenic/ingenic_ecc.h83
-rw-r--r--drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c575
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4725b_bch.c295
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4740_ecc.c197
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4780_bch.c271
8 files changed, 1634 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig
new file mode 100644
index 0000000000..96c5ae8b1b
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Kconfig
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MTD_NAND_JZ4780
+ tristate "JZ4780 NAND controller"
+ depends on MIPS || COMPILE_TEST
+ depends on JZ4780_NEMC
+ help
+ Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
+ based boards, using the BCH controller for hardware error correction.
+
+if MTD_NAND_JZ4780
+
+config MTD_NAND_INGENIC_ECC
+ bool
+
+config MTD_NAND_JZ4740_ECC
+ tristate "Hardware BCH support for JZ4740 SoC"
+ select MTD_NAND_INGENIC_ECC
+ help
+ Enable this driver to support the Reed-Solomon error-correction
+ hardware present on the JZ4740 SoC from Ingenic.
+
+ This driver can also be built as a module. If so, the module
+ will be called jz4740-ecc.
+
+config MTD_NAND_JZ4725B_BCH
+ tristate "Hardware BCH support for JZ4725B SoC"
+ select MTD_NAND_INGENIC_ECC
+ help
+ Enable this driver to support the BCH error-correction hardware
+ present on the JZ4725B SoC from Ingenic.
+
+ This driver can also be built as a module. If so, the module
+ will be called jz4725b-bch.
+
+config MTD_NAND_JZ4780_BCH
+ tristate "Hardware BCH support for JZ4780 SoC"
+ select MTD_NAND_INGENIC_ECC
+ help
+ Enable this driver to support the BCH error-correction hardware
+ present on the JZ4780 SoC from Ingenic.
+
+ This driver can also be built as a module. If so, the module
+ will be called jz4780-bch.
+
+endif # MTD_NAND_JZ4780
diff --git a/drivers/mtd/nand/raw/ingenic/Makefile b/drivers/mtd/nand/raw/ingenic/Makefile
new file mode 100644
index 0000000000..4c53f5e759
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_MTD_NAND_JZ4780) += ingenic_nand.o
+
+ingenic_nand-y += ingenic_nand_drv.o
+ingenic_nand-$(CONFIG_MTD_NAND_INGENIC_ECC) += ingenic_ecc.o
+
+obj-$(CONFIG_MTD_NAND_JZ4740_ECC) += jz4740_ecc.o
+obj-$(CONFIG_MTD_NAND_JZ4725B_BCH) += jz4725b_bch.o
+obj-$(CONFIG_MTD_NAND_JZ4780_BCH) += jz4780_bch.o
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
new file mode 100644
index 0000000000..525c34c281
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx ECC common code
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+/**
+ * ingenic_ecc_calculate() - calculate ECC for a data buffer
+ * @ecc: ECC device.
+ * @params: ECC parameters.
+ * @buf: input buffer with raw data.
+ * @ecc_code: output buffer with ECC.
+ *
+ * Return: 0 on success, -ETIMEDOUT if timed out while waiting for ECC
+ * controller.
+ */
+int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code)
+{
+ return ecc->ops->calculate(ecc, params, buf, ecc_code);
+}
+
+/**
+ * ingenic_ecc_correct() - detect and correct bit errors
+ * @ecc: ECC device.
+ * @params: ECC parameters.
+ * @buf: raw data read from the chip.
+ * @ecc_code: ECC read from the chip.
+ *
+ * Given the raw data and the ECC read from the NAND device, detects and
+ * corrects errors in the data.
+ *
+ * Return: the number of bit errors corrected, -EBADMSG if there are too many
+ * errors to correct or -ETIMEDOUT if we timed out waiting for the controller.
+ */
+int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ u8 *buf, u8 *ecc_code)
+{
+ return ecc->ops->correct(ecc, params, buf, ecc_code);
+}
+
+/**
+ * ingenic_ecc_get() - get the ECC controller device
+ * @np: ECC device tree node.
+ *
+ * Gets the ECC controller device from the specified device tree node. The
+ * device must be released with ingenic_ecc_release() when it is no longer being
+ * used.
+ *
+ * Return: a pointer to ingenic_ecc, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+static struct ingenic_ecc *ingenic_ecc_get(struct device_node *np)
+{
+ struct platform_device *pdev;
+ struct ingenic_ecc *ecc;
+
+ pdev = of_find_device_by_node(np);
+ if (!pdev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ if (!platform_get_drvdata(pdev)) {
+ put_device(&pdev->dev);
+ return ERR_PTR(-EPROBE_DEFER);
+ }
+
+ ecc = platform_get_drvdata(pdev);
+ clk_prepare_enable(ecc->clk);
+
+ return ecc;
+}
+
+/**
+ * of_ingenic_ecc_get() - get the ECC controller from a DT node
+ * @of_node: the node that contains an ecc-engine property.
+ *
+ * Get the ecc-engine property from the given device tree
+ * node and pass it to ingenic_ecc_get to do the work.
+ *
+ * Return: a pointer to ingenic_ecc, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *of_node)
+{
+ struct ingenic_ecc *ecc = NULL;
+ struct device_node *np;
+
+ np = of_parse_phandle(of_node, "ecc-engine", 0);
+
+ /*
+ * If the ecc-engine property is not found, check for the deprecated
+ * ingenic,bch-controller property
+ */
+ if (!np)
+ np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
+
+ if (np) {
+ ecc = ingenic_ecc_get(np);
+ of_node_put(np);
+ }
+ return ecc;
+}
+
+/**
+ * ingenic_ecc_release() - release the ECC controller device
+ * @ecc: ECC device.
+ */
+void ingenic_ecc_release(struct ingenic_ecc *ecc)
+{
+ clk_disable_unprepare(ecc->clk);
+ put_device(ecc->dev);
+}
+
+int ingenic_ecc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ingenic_ecc *ecc;
+
+ ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
+ if (!ecc)
+ return -ENOMEM;
+
+ ecc->ops = device_get_match_data(dev);
+ if (!ecc->ops)
+ return -EINVAL;
+
+ ecc->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ecc->base))
+ return PTR_ERR(ecc->base);
+
+ ecc->ops->disable(ecc);
+
+ ecc->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(ecc->clk)) {
+ dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(ecc->clk));
+ return PTR_ERR(ecc->clk);
+ }
+
+ mutex_init(&ecc->lock);
+
+ ecc->dev = dev;
+ platform_set_drvdata(pdev, ecc);
+
+ return 0;
+}
+EXPORT_SYMBOL(ingenic_ecc_probe);
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h
new file mode 100644
index 0000000000..017868f59f
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__
+#define __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__
+
+#include <linux/compiler_types.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+#include <uapi/asm-generic/errno-base.h>
+
+struct clk;
+struct device;
+struct ingenic_ecc;
+struct platform_device;
+
+/**
+ * struct ingenic_ecc_params - ECC parameters
+ * @size: data bytes per ECC step.
+ * @bytes: ECC bytes per step.
+ * @strength: number of correctable bits per ECC step.
+ */
+struct ingenic_ecc_params {
+ int size;
+ int bytes;
+ int strength;
+};
+
+#if IS_ENABLED(CONFIG_MTD_NAND_INGENIC_ECC)
+int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code);
+int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params, u8 *buf,
+ u8 *ecc_code);
+
+void ingenic_ecc_release(struct ingenic_ecc *ecc);
+struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np);
+#else /* CONFIG_MTD_NAND_INGENIC_ECC */
+static inline int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code)
+{
+ return -ENODEV;
+}
+
+static inline int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params, u8 *buf,
+ u8 *ecc_code)
+{
+ return -ENODEV;
+}
+
+static inline void ingenic_ecc_release(struct ingenic_ecc *ecc)
+{
+}
+
+static inline struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np)
+{
+ return ERR_PTR(-ENODEV);
+}
+#endif /* CONFIG_MTD_NAND_INGENIC_ECC */
+
+struct ingenic_ecc_ops {
+ void (*disable)(struct ingenic_ecc *ecc);
+ int (*calculate)(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code);
+ int (*correct)(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ u8 *buf, u8 *ecc_code);
+};
+
+struct ingenic_ecc {
+ struct device *dev;
+ const struct ingenic_ecc_ops *ops;
+ void __iomem *base;
+ struct clk *clk;
+ struct mutex lock;
+};
+
+int ingenic_ecc_probe(struct platform_device *pdev);
+
+#endif /* __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__ */
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
new file mode 100644
index 0000000000..6748226b8b
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ47xx NAND driver
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/jz4780-nemc.h>
+
+#include "ingenic_ecc.h"
+
+#define DRV_NAME "ingenic-nand"
+
+struct jz_soc_info {
+ unsigned long data_offset;
+ unsigned long addr_offset;
+ unsigned long cmd_offset;
+ const struct mtd_ooblayout_ops *oob_layout;
+ bool oob_first;
+};
+
+struct ingenic_nand_cs {
+ unsigned int bank;
+ void __iomem *base;
+};
+
+struct ingenic_nfc {
+ struct device *dev;
+ struct ingenic_ecc *ecc;
+ const struct jz_soc_info *soc_info;
+ struct nand_controller controller;
+ unsigned int num_banks;
+ struct list_head chips;
+ struct ingenic_nand_cs cs[];
+};
+
+struct ingenic_nand {
+ struct nand_chip chip;
+ struct list_head chip_list;
+
+ struct gpio_desc *busy_gpio;
+ struct gpio_desc *wp_gpio;
+ unsigned int reading: 1;
+};
+
+static inline struct ingenic_nand *to_ingenic_nand(struct mtd_info *mtd)
+{
+ return container_of(mtd_to_nand(mtd), struct ingenic_nand, chip);
+}
+
+static inline struct ingenic_nfc *to_ingenic_nfc(struct nand_controller *ctrl)
+{
+ return container_of(ctrl, struct ingenic_nfc, controller);
+}
+
+static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section || !ecc->total)
+ return -ERANGE;
+
+ oobregion->length = ecc->total;
+ oobregion->offset = 12;
+
+ return 0;
+}
+
+static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = mtd->oobsize - ecc->total - 12;
+ oobregion->offset = 12 + ecc->total;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
+ .ecc = qi_lb60_ooblayout_ecc,
+ .free = qi_lb60_ooblayout_free,
+};
+
+static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section || !ecc->total)
+ return -ERANGE;
+
+ oobregion->length = ecc->total;
+ oobregion->offset = 3;
+
+ return 0;
+}
+
+static int jz4725b_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = mtd->oobsize - ecc->total - 3;
+ oobregion->offset = 3 + ecc->total;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops jz4725b_ooblayout_ops = {
+ .ecc = jz4725b_ooblayout_ecc,
+ .free = jz4725b_ooblayout_free,
+};
+
+static void ingenic_nand_ecc_hwctl(struct nand_chip *chip, int mode)
+{
+ struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+
+ nand->reading = (mode == NAND_ECC_READ);
+}
+
+static int ingenic_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat,
+ u8 *ecc_code)
+{
+ struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+ struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+ struct ingenic_ecc_params params;
+
+ /*
+ * Don't need to generate the ECC when reading, the ECC engine does it
+ * for us as part of decoding/correction.
+ */
+ if (nand->reading)
+ return 0;
+
+ params.size = nand->chip.ecc.size;
+ params.bytes = nand->chip.ecc.bytes;
+ params.strength = nand->chip.ecc.strength;
+
+ return ingenic_ecc_calculate(nfc->ecc, &params, dat, ecc_code);
+}
+
+static int ingenic_nand_ecc_correct(struct nand_chip *chip, u8 *dat,
+ u8 *read_ecc, u8 *calc_ecc)
+{
+ struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+ struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+ struct ingenic_ecc_params params;
+
+ params.size = nand->chip.ecc.size;
+ params.bytes = nand->chip.ecc.bytes;
+ params.strength = nand->chip.ecc.strength;
+
+ return ingenic_ecc_correct(nfc->ecc, &params, dat, read_ecc);
+}
+
+static int ingenic_nand_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct ingenic_nfc *nfc = to_ingenic_nfc(chip->controller);
+ int eccbytes;
+
+ if (chip->ecc.strength == 4) {
+ /* JZ4740 uses 9 bytes of ECC to correct maximum 4 errors */
+ chip->ecc.bytes = 9;
+ } else {
+ chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
+ (chip->ecc.strength / 8);
+ }
+
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
+ if (!nfc->ecc) {
+ dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
+ return -ENODEV;
+ }
+
+ chip->ecc.hwctl = ingenic_nand_ecc_hwctl;
+ chip->ecc.calculate = ingenic_nand_ecc_calculate;
+ chip->ecc.correct = ingenic_nand_ecc_correct;
+ fallthrough;
+ case NAND_ECC_ENGINE_TYPE_SOFT:
+ dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
+ (nfc->ecc) ? "hardware ECC" : "software ECC",
+ chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
+ break;
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ dev_info(nfc->dev, "not using ECC\n");
+ break;
+ default:
+ dev_err(nfc->dev, "ECC mode %d not supported\n",
+ chip->ecc.engine_type);
+ return -EINVAL;
+ }
+
+ /* The NAND core will generate the ECC layout for SW ECC */
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
+ return 0;
+
+ /* Generate ECC layout. ECC codes are right aligned in the OOB area. */
+ eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
+
+ if (eccbytes > mtd->oobsize - 2) {
+ dev_err(nfc->dev,
+ "invalid ECC config: required %d ECC bytes, but only %d are available",
+ eccbytes, mtd->oobsize - 2);
+ return -EINVAL;
+ }
+
+ /*
+ * The generic layout for BBT markers will most likely overlap with our
+ * ECC bytes in the OOB, so move the BBT markers outside the OOB area.
+ */
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+
+ if (nfc->soc_info->oob_first)
+ chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+
+ /* For legacy reasons we use a different layout on the qi,lb60 board. */
+ if (of_machine_is_compatible("qi,lb60"))
+ mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
+ else if (nfc->soc_info->oob_layout)
+ mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
+ else
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
+
+ return 0;
+}
+
+static int ingenic_nand_exec_instr(struct nand_chip *chip,
+ struct ingenic_nand_cs *cs,
+ const struct nand_op_instr *instr)
+{
+ struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+ struct ingenic_nfc *nfc = to_ingenic_nfc(chip->controller);
+ unsigned int i;
+
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ writeb(instr->ctx.cmd.opcode,
+ cs->base + nfc->soc_info->cmd_offset);
+ return 0;
+ case NAND_OP_ADDR_INSTR:
+ for (i = 0; i < instr->ctx.addr.naddrs; i++)
+ writeb(instr->ctx.addr.addrs[i],
+ cs->base + nfc->soc_info->addr_offset);
+ return 0;
+ case NAND_OP_DATA_IN_INSTR:
+ if (instr->ctx.data.force_8bit ||
+ !(chip->options & NAND_BUSWIDTH_16))
+ ioread8_rep(cs->base + nfc->soc_info->data_offset,
+ instr->ctx.data.buf.in,
+ instr->ctx.data.len);
+ else
+ ioread16_rep(cs->base + nfc->soc_info->data_offset,
+ instr->ctx.data.buf.in,
+ instr->ctx.data.len);
+ return 0;
+ case NAND_OP_DATA_OUT_INSTR:
+ if (instr->ctx.data.force_8bit ||
+ !(chip->options & NAND_BUSWIDTH_16))
+ iowrite8_rep(cs->base + nfc->soc_info->data_offset,
+ instr->ctx.data.buf.out,
+ instr->ctx.data.len);
+ else
+ iowrite16_rep(cs->base + nfc->soc_info->data_offset,
+ instr->ctx.data.buf.out,
+ instr->ctx.data.len);
+ return 0;
+ case NAND_OP_WAITRDY_INSTR:
+ if (!nand->busy_gpio)
+ return nand_soft_waitrdy(chip,
+ instr->ctx.waitrdy.timeout_ms);
+
+ return nand_gpio_waitrdy(chip, nand->busy_gpio,
+ instr->ctx.waitrdy.timeout_ms);
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int ingenic_nand_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op,
+ bool check_only)
+{
+ struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+ struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+ struct ingenic_nand_cs *cs;
+ unsigned int i;
+ int ret = 0;
+
+ if (check_only)
+ return 0;
+
+ cs = &nfc->cs[op->cs];
+ jz4780_nemc_assert(nfc->dev, cs->bank, true);
+ for (i = 0; i < op->ninstrs; i++) {
+ ret = ingenic_nand_exec_instr(chip, cs, &op->instrs[i]);
+ if (ret)
+ break;
+
+ if (op->instrs[i].delay_ns)
+ ndelay(op->instrs[i].delay_ns);
+ }
+ jz4780_nemc_assert(nfc->dev, cs->bank, false);
+
+ return ret;
+}
+
+static const struct nand_controller_ops ingenic_nand_controller_ops = {
+ .attach_chip = ingenic_nand_attach_chip,
+ .exec_op = ingenic_nand_exec_op,
+};
+
+static int ingenic_nand_init_chip(struct platform_device *pdev,
+ struct ingenic_nfc *nfc,
+ struct device_node *np,
+ unsigned int chipnr)
+{
+ struct device *dev = &pdev->dev;
+ struct ingenic_nand *nand;
+ struct ingenic_nand_cs *cs;
+ struct nand_chip *chip;
+ struct mtd_info *mtd;
+ const __be32 *reg;
+ int ret = 0;
+
+ cs = &nfc->cs[chipnr];
+
+ reg = of_get_property(np, "reg", NULL);
+ if (!reg)
+ return -EINVAL;
+
+ cs->bank = be32_to_cpu(*reg);
+
+ jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
+
+ cs->base = devm_platform_ioremap_resource(pdev, chipnr);
+ if (IS_ERR(cs->base))
+ return PTR_ERR(cs->base);
+
+ nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
+ if (!nand)
+ return -ENOMEM;
+
+ nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
+
+ if (IS_ERR(nand->busy_gpio)) {
+ ret = PTR_ERR(nand->busy_gpio);
+ dev_err(dev, "failed to request busy GPIO: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * The rb-gpios semantics was undocumented and qi,lb60 (along with
+ * the ingenic driver) got it wrong. The active state encodes the
+ * NAND ready state, which is high level. Since there's no signal
+ * inverter on this board, it should be active-high. Let's fix that
+ * here for older DTs so we can re-use the generic nand_gpio_waitrdy()
+ * helper, and be consistent with what other drivers do.
+ */
+ if (of_machine_is_compatible("qi,lb60") &&
+ gpiod_is_active_low(nand->busy_gpio))
+ gpiod_toggle_active_low(nand->busy_gpio);
+
+ nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
+
+ if (IS_ERR(nand->wp_gpio)) {
+ ret = PTR_ERR(nand->wp_gpio);
+ dev_err(dev, "failed to request WP GPIO: %d\n", ret);
+ return ret;
+ }
+
+ chip = &nand->chip;
+ mtd = nand_to_mtd(chip);
+ mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
+ cs->bank);
+ if (!mtd->name)
+ return -ENOMEM;
+ mtd->dev.parent = dev;
+
+ chip->options = NAND_NO_SUBPAGE_WRITE;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+ chip->controller = &nfc->controller;
+ nand_set_flash_node(chip, np);
+
+ chip->controller->ops = &ingenic_nand_controller_ops;
+ ret = nand_scan(chip, 1);
+ if (ret)
+ return ret;
+
+ ret = mtd_device_register(mtd, NULL, 0);
+ if (ret) {
+ nand_cleanup(chip);
+ return ret;
+ }
+
+ list_add_tail(&nand->chip_list, &nfc->chips);
+
+ return 0;
+}
+
+static void ingenic_nand_cleanup_chips(struct ingenic_nfc *nfc)
+{
+ struct ingenic_nand *ingenic_chip;
+ struct nand_chip *chip;
+ int ret;
+
+ while (!list_empty(&nfc->chips)) {
+ ingenic_chip = list_first_entry(&nfc->chips,
+ struct ingenic_nand, chip_list);
+ chip = &ingenic_chip->chip;
+ ret = mtd_device_unregister(nand_to_mtd(chip));
+ WARN_ON(ret);
+ nand_cleanup(chip);
+ list_del(&ingenic_chip->chip_list);
+ }
+}
+
+static int ingenic_nand_init_chips(struct ingenic_nfc *nfc,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np;
+ int i = 0;
+ int ret;
+ int num_chips = of_get_child_count(dev->of_node);
+
+ if (num_chips > nfc->num_banks) {
+ dev_err(dev, "found %d chips but only %d banks\n",
+ num_chips, nfc->num_banks);
+ return -EINVAL;
+ }
+
+ for_each_child_of_node(dev->of_node, np) {
+ ret = ingenic_nand_init_chip(pdev, nfc, np, i);
+ if (ret) {
+ ingenic_nand_cleanup_chips(nfc);
+ of_node_put(np);
+ return ret;
+ }
+
+ i++;
+ }
+
+ return 0;
+}
+
+static int ingenic_nand_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ unsigned int num_banks;
+ struct ingenic_nfc *nfc;
+ int ret;
+
+ num_banks = jz4780_nemc_num_banks(dev);
+ if (num_banks == 0) {
+ dev_err(dev, "no banks found\n");
+ return -ENODEV;
+ }
+
+ nfc = devm_kzalloc(dev, struct_size(nfc, cs, num_banks), GFP_KERNEL);
+ if (!nfc)
+ return -ENOMEM;
+
+ nfc->soc_info = device_get_match_data(dev);
+ if (!nfc->soc_info)
+ return -EINVAL;
+
+ /*
+ * Check for ECC HW before we call nand_scan_ident, to prevent us from
+ * having to call it again if the ECC driver returns -EPROBE_DEFER.
+ */
+ nfc->ecc = of_ingenic_ecc_get(dev->of_node);
+ if (IS_ERR(nfc->ecc))
+ return PTR_ERR(nfc->ecc);
+
+ nfc->dev = dev;
+ nfc->num_banks = num_banks;
+
+ nand_controller_init(&nfc->controller);
+ INIT_LIST_HEAD(&nfc->chips);
+
+ ret = ingenic_nand_init_chips(nfc, pdev);
+ if (ret) {
+ if (nfc->ecc)
+ ingenic_ecc_release(nfc->ecc);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, nfc);
+ return 0;
+}
+
+static void ingenic_nand_remove(struct platform_device *pdev)
+{
+ struct ingenic_nfc *nfc = platform_get_drvdata(pdev);
+
+ if (nfc->ecc)
+ ingenic_ecc_release(nfc->ecc);
+
+ ingenic_nand_cleanup_chips(nfc);
+}
+
+static const struct jz_soc_info jz4740_soc_info = {
+ .data_offset = 0x00000000,
+ .cmd_offset = 0x00008000,
+ .addr_offset = 0x00010000,
+ .oob_first = true,
+};
+
+static const struct jz_soc_info jz4725b_soc_info = {
+ .data_offset = 0x00000000,
+ .cmd_offset = 0x00008000,
+ .addr_offset = 0x00010000,
+ .oob_layout = &jz4725b_ooblayout_ops,
+};
+
+static const struct jz_soc_info jz4780_soc_info = {
+ .data_offset = 0x00000000,
+ .cmd_offset = 0x00400000,
+ .addr_offset = 0x00800000,
+};
+
+static const struct of_device_id ingenic_nand_dt_match[] = {
+ { .compatible = "ingenic,jz4740-nand", .data = &jz4740_soc_info },
+ { .compatible = "ingenic,jz4725b-nand", .data = &jz4725b_soc_info },
+ { .compatible = "ingenic,jz4780-nand", .data = &jz4780_soc_info },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ingenic_nand_dt_match);
+
+static struct platform_driver ingenic_nand_driver = {
+ .probe = ingenic_nand_probe,
+ .remove_new = ingenic_nand_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = ingenic_nand_dt_match,
+ },
+};
+module_platform_driver(ingenic_nand_driver);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
+MODULE_DESCRIPTION("Ingenic JZ47xx NAND driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
new file mode 100644
index 0000000000..2d0e0a2192
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4725B BCH controller driver
+ *
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ *
+ * Based on jz4780_bch.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+#define BCH_BHCR 0x0
+#define BCH_BHCSR 0x4
+#define BCH_BHCCR 0x8
+#define BCH_BHCNT 0xc
+#define BCH_BHDR 0x10
+#define BCH_BHPAR0 0x14
+#define BCH_BHERR0 0x28
+#define BCH_BHINT 0x24
+#define BCH_BHINTES 0x3c
+#define BCH_BHINTEC 0x40
+#define BCH_BHINTE 0x38
+
+#define BCH_BHCR_ENCE BIT(3)
+#define BCH_BHCR_BSEL BIT(2)
+#define BCH_BHCR_INIT BIT(1)
+#define BCH_BHCR_BCHE BIT(0)
+
+#define BCH_BHCNT_DEC_COUNT_SHIFT 16
+#define BCH_BHCNT_DEC_COUNT_MASK (0x3ff << BCH_BHCNT_DEC_COUNT_SHIFT)
+#define BCH_BHCNT_ENC_COUNT_SHIFT 0
+#define BCH_BHCNT_ENC_COUNT_MASK (0x3ff << BCH_BHCNT_ENC_COUNT_SHIFT)
+
+#define BCH_BHERR_INDEX0_SHIFT 0
+#define BCH_BHERR_INDEX0_MASK (0x1fff << BCH_BHERR_INDEX0_SHIFT)
+#define BCH_BHERR_INDEX1_SHIFT 16
+#define BCH_BHERR_INDEX1_MASK (0x1fff << BCH_BHERR_INDEX1_SHIFT)
+
+#define BCH_BHINT_ERRC_SHIFT 28
+#define BCH_BHINT_ERRC_MASK (0xf << BCH_BHINT_ERRC_SHIFT)
+#define BCH_BHINT_TERRC_SHIFT 16
+#define BCH_BHINT_TERRC_MASK (0x7f << BCH_BHINT_TERRC_SHIFT)
+#define BCH_BHINT_ALL_0 BIT(5)
+#define BCH_BHINT_ALL_F BIT(4)
+#define BCH_BHINT_DECF BIT(3)
+#define BCH_BHINT_ENCF BIT(2)
+#define BCH_BHINT_UNCOR BIT(1)
+#define BCH_BHINT_ERR BIT(0)
+
+/* Timeout for BCH calculation/correction. */
+#define BCH_TIMEOUT_US 100000
+
+static inline void jz4725b_bch_config_set(struct ingenic_ecc *bch, u32 cfg)
+{
+ writel(cfg, bch->base + BCH_BHCSR);
+}
+
+static inline void jz4725b_bch_config_clear(struct ingenic_ecc *bch, u32 cfg)
+{
+ writel(cfg, bch->base + BCH_BHCCR);
+}
+
+static int jz4725b_bch_reset(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params, bool calc_ecc)
+{
+ u32 reg, max_value;
+
+ /* Clear interrupt status. */
+ writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+ /* Initialise and enable BCH. */
+ jz4725b_bch_config_clear(bch, 0x1f);
+ jz4725b_bch_config_set(bch, BCH_BHCR_BCHE);
+
+ if (params->strength == 8)
+ jz4725b_bch_config_set(bch, BCH_BHCR_BSEL);
+ else
+ jz4725b_bch_config_clear(bch, BCH_BHCR_BSEL);
+
+ if (calc_ecc) /* calculate ECC from data */
+ jz4725b_bch_config_set(bch, BCH_BHCR_ENCE);
+ else /* correct data from ECC */
+ jz4725b_bch_config_clear(bch, BCH_BHCR_ENCE);
+
+ jz4725b_bch_config_set(bch, BCH_BHCR_INIT);
+
+ max_value = BCH_BHCNT_ENC_COUNT_MASK >> BCH_BHCNT_ENC_COUNT_SHIFT;
+ if (params->size > max_value)
+ return -EINVAL;
+
+ max_value = BCH_BHCNT_DEC_COUNT_MASK >> BCH_BHCNT_DEC_COUNT_SHIFT;
+ if (params->size + params->bytes > max_value)
+ return -EINVAL;
+
+ /* Set up BCH count register. */
+ reg = params->size << BCH_BHCNT_ENC_COUNT_SHIFT;
+ reg |= (params->size + params->bytes) << BCH_BHCNT_DEC_COUNT_SHIFT;
+ writel(reg, bch->base + BCH_BHCNT);
+
+ return 0;
+}
+
+static void jz4725b_bch_disable(struct ingenic_ecc *bch)
+{
+ /* Clear interrupts */
+ writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+ /* Disable the hardware */
+ jz4725b_bch_config_clear(bch, BCH_BHCR_BCHE);
+}
+
+static void jz4725b_bch_write_data(struct ingenic_ecc *bch, const u8 *buf,
+ size_t size)
+{
+ while (size--)
+ writeb(*buf++, bch->base + BCH_BHDR);
+}
+
+static void jz4725b_bch_read_parity(struct ingenic_ecc *bch, u8 *buf,
+ size_t size)
+{
+ size_t size32 = size / sizeof(u32);
+ size_t size8 = size % sizeof(u32);
+ u32 *dest32;
+ u8 *dest8;
+ u32 val, offset = 0;
+
+ dest32 = (u32 *)buf;
+ while (size32--) {
+ *dest32++ = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
+ offset += sizeof(u32);
+ }
+
+ dest8 = (u8 *)dest32;
+ val = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
+ switch (size8) {
+ case 3:
+ dest8[2] = (val >> 16) & 0xff;
+ fallthrough;
+ case 2:
+ dest8[1] = (val >> 8) & 0xff;
+ fallthrough;
+ case 1:
+ dest8[0] = val & 0xff;
+ break;
+ }
+}
+
+static int jz4725b_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
+ u32 *status)
+{
+ u32 reg;
+ int ret;
+
+ /*
+ * While we could use interrupts here and sleep until the operation
+ * completes, the controller works fairly quickly (usually a few
+ * microseconds) and so the overhead of sleeping until we get an
+ * interrupt quite noticeably decreases performance.
+ */
+ ret = readl_relaxed_poll_timeout(bch->base + BCH_BHINT, reg,
+ reg & irq, 0, BCH_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ if (status)
+ *status = reg;
+
+ writel(reg, bch->base + BCH_BHINT);
+
+ return 0;
+}
+
+static int jz4725b_calculate(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code)
+{
+ int ret;
+
+ mutex_lock(&bch->lock);
+
+ ret = jz4725b_bch_reset(bch, params, true);
+ if (ret) {
+ dev_err(bch->dev, "Unable to init BCH with given parameters\n");
+ goto out_disable;
+ }
+
+ jz4725b_bch_write_data(bch, buf, params->size);
+
+ ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL);
+ if (ret) {
+ dev_err(bch->dev, "timed out while calculating ECC\n");
+ goto out_disable;
+ }
+
+ jz4725b_bch_read_parity(bch, ecc_code, params->bytes);
+
+out_disable:
+ jz4725b_bch_disable(bch);
+ mutex_unlock(&bch->lock);
+
+ return ret;
+}
+
+static int jz4725b_correct(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params,
+ u8 *buf, u8 *ecc_code)
+{
+ u32 reg, errors, bit;
+ unsigned int i;
+ int ret;
+
+ mutex_lock(&bch->lock);
+
+ ret = jz4725b_bch_reset(bch, params, false);
+ if (ret) {
+ dev_err(bch->dev, "Unable to init BCH with given parameters\n");
+ goto out;
+ }
+
+ jz4725b_bch_write_data(bch, buf, params->size);
+ jz4725b_bch_write_data(bch, ecc_code, params->bytes);
+
+ ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_DECF, &reg);
+ if (ret) {
+ dev_err(bch->dev, "timed out while correcting data\n");
+ goto out;
+ }
+
+ if (reg & (BCH_BHINT_ALL_F | BCH_BHINT_ALL_0)) {
+ /* Data and ECC is all 0xff or 0x00 - nothing to correct */
+ ret = 0;
+ goto out;
+ }
+
+ if (reg & BCH_BHINT_UNCOR) {
+ /* Uncorrectable ECC error */
+ ret = -EBADMSG;
+ goto out;
+ }
+
+ errors = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
+
+ /* Correct any detected errors. */
+ for (i = 0; i < errors; i++) {
+ if (i & 1) {
+ bit = (reg & BCH_BHERR_INDEX1_MASK) >> BCH_BHERR_INDEX1_SHIFT;
+ } else {
+ reg = readl(bch->base + BCH_BHERR0 + (i * 4));
+ bit = (reg & BCH_BHERR_INDEX0_MASK) >> BCH_BHERR_INDEX0_SHIFT;
+ }
+
+ buf[(bit >> 3)] ^= BIT(bit & 0x7);
+ }
+
+out:
+ jz4725b_bch_disable(bch);
+ mutex_unlock(&bch->lock);
+
+ return ret;
+}
+
+static const struct ingenic_ecc_ops jz4725b_bch_ops = {
+ .disable = jz4725b_bch_disable,
+ .calculate = jz4725b_calculate,
+ .correct = jz4725b_correct,
+};
+
+static const struct of_device_id jz4725b_bch_dt_match[] = {
+ { .compatible = "ingenic,jz4725b-bch", .data = &jz4725b_bch_ops },
+ {},
+};
+MODULE_DEVICE_TABLE(of, jz4725b_bch_dt_match);
+
+static struct platform_driver jz4725b_bch_driver = {
+ .probe = ingenic_ecc_probe,
+ .driver = {
+ .name = "jz4725b-bch",
+ .of_match_table = jz4725b_bch_dt_match,
+ },
+};
+module_platform_driver(jz4725b_bch_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4725B BCH controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c b/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c
new file mode 100644
index 0000000000..54e377754a
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4740 ECC controller driver
+ *
+ * Copyright (c) 2019 Paul Cercueil <paul@crapouillou.net>
+ *
+ * based on jz4740-nand.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+#define JZ_REG_NAND_ECC_CTRL 0x00
+#define JZ_REG_NAND_DATA 0x04
+#define JZ_REG_NAND_PAR0 0x08
+#define JZ_REG_NAND_PAR1 0x0C
+#define JZ_REG_NAND_PAR2 0x10
+#define JZ_REG_NAND_IRQ_STAT 0x14
+#define JZ_REG_NAND_IRQ_CTRL 0x18
+#define JZ_REG_NAND_ERR(x) (0x1C + ((x) << 2))
+
+#define JZ_NAND_ECC_CTRL_PAR_READY BIT(4)
+#define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
+#define JZ_NAND_ECC_CTRL_RS BIT(2)
+#define JZ_NAND_ECC_CTRL_RESET BIT(1)
+#define JZ_NAND_ECC_CTRL_ENABLE BIT(0)
+
+#define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29))
+#define JZ_NAND_STATUS_PAD_FINISH BIT(4)
+#define JZ_NAND_STATUS_DEC_FINISH BIT(3)
+#define JZ_NAND_STATUS_ENC_FINISH BIT(2)
+#define JZ_NAND_STATUS_UNCOR_ERROR BIT(1)
+#define JZ_NAND_STATUS_ERROR BIT(0)
+
+static const uint8_t empty_block_ecc[] = {
+ 0xcd, 0x9d, 0x90, 0x58, 0xf4, 0x8b, 0xff, 0xb7, 0x6f
+};
+
+static void jz4740_ecc_reset(struct ingenic_ecc *ecc, bool calc_ecc)
+{
+ uint32_t reg;
+
+ /* Clear interrupt status */
+ writel(0, ecc->base + JZ_REG_NAND_IRQ_STAT);
+
+ /* Initialize and enable ECC hardware */
+ reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+ reg |= JZ_NAND_ECC_CTRL_RESET;
+ reg |= JZ_NAND_ECC_CTRL_ENABLE;
+ reg |= JZ_NAND_ECC_CTRL_RS;
+ if (calc_ecc) /* calculate ECC from data */
+ reg |= JZ_NAND_ECC_CTRL_ENCODING;
+ else /* correct data from ECC */
+ reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
+
+ writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static int jz4740_ecc_calculate(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code)
+{
+ uint32_t reg, status;
+ unsigned int timeout = 1000;
+ int i;
+
+ jz4740_ecc_reset(ecc, true);
+
+ do {
+ status = readl(ecc->base + JZ_REG_NAND_IRQ_STAT);
+ } while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+
+ reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+ writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+ for (i = 0; i < params->bytes; ++i)
+ ecc_code[i] = readb(ecc->base + JZ_REG_NAND_PAR0 + i);
+
+ /*
+ * If the written data is completely 0xff, we also want to write 0xff as
+ * ECC, otherwise we will get in trouble when doing subpage writes.
+ */
+ if (memcmp(ecc_code, empty_block_ecc, sizeof(empty_block_ecc)) == 0)
+ memset(ecc_code, 0xff, sizeof(empty_block_ecc));
+
+ return 0;
+}
+
+static void jz_nand_correct_data(uint8_t *buf, int index, int mask)
+{
+ int offset = index & 0x7;
+ uint16_t data;
+
+ index += (index >> 3);
+
+ data = buf[index];
+ data |= buf[index + 1] << 8;
+
+ mask ^= (data >> offset) & 0x1ff;
+ data &= ~(0x1ff << offset);
+ data |= (mask << offset);
+
+ buf[index] = data & 0xff;
+ buf[index + 1] = (data >> 8) & 0xff;
+}
+
+static int jz4740_ecc_correct(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ u8 *buf, u8 *ecc_code)
+{
+ int i, error_count, index;
+ uint32_t reg, status, error;
+ unsigned int timeout = 1000;
+
+ jz4740_ecc_reset(ecc, false);
+
+ for (i = 0; i < params->bytes; ++i)
+ writeb(ecc_code[i], ecc->base + JZ_REG_NAND_PAR0 + i);
+
+ reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+ reg |= JZ_NAND_ECC_CTRL_PAR_READY;
+ writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+ do {
+ status = readl(ecc->base + JZ_REG_NAND_IRQ_STAT);
+ } while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+
+ reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+ writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+ if (status & JZ_NAND_STATUS_ERROR) {
+ if (status & JZ_NAND_STATUS_UNCOR_ERROR)
+ return -EBADMSG;
+
+ error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
+
+ for (i = 0; i < error_count; ++i) {
+ error = readl(ecc->base + JZ_REG_NAND_ERR(i));
+ index = ((error >> 16) & 0x1ff) - 1;
+ if (index >= 0 && index < params->size)
+ jz_nand_correct_data(buf, index, error & 0x1ff);
+ }
+
+ return error_count;
+ }
+
+ return 0;
+}
+
+static void jz4740_ecc_disable(struct ingenic_ecc *ecc)
+{
+ u32 reg;
+
+ writel(0, ecc->base + JZ_REG_NAND_IRQ_STAT);
+ reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+ writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static const struct ingenic_ecc_ops jz4740_ecc_ops = {
+ .disable = jz4740_ecc_disable,
+ .calculate = jz4740_ecc_calculate,
+ .correct = jz4740_ecc_correct,
+};
+
+static const struct of_device_id jz4740_ecc_dt_match[] = {
+ { .compatible = "ingenic,jz4740-ecc", .data = &jz4740_ecc_ops },
+ {},
+};
+MODULE_DEVICE_TABLE(of, jz4740_ecc_dt_match);
+
+static struct platform_driver jz4740_ecc_driver = {
+ .probe = ingenic_ecc_probe,
+ .driver = {
+ .name = "jz4740-ecc",
+ .of_match_table = jz4740_ecc_dt_match,
+ },
+};
+module_platform_driver(jz4740_ecc_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4740 ECC controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_bch.c b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
new file mode 100644
index 0000000000..12b5b0484f
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4780 BCH controller driver
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+#define BCH_BHCR 0x0
+#define BCH_BHCCR 0x8
+#define BCH_BHCNT 0xc
+#define BCH_BHDR 0x10
+#define BCH_BHPAR0 0x14
+#define BCH_BHERR0 0x84
+#define BCH_BHINT 0x184
+#define BCH_BHINTES 0x188
+#define BCH_BHINTEC 0x18c
+#define BCH_BHINTE 0x190
+
+#define BCH_BHCR_BSEL_SHIFT 4
+#define BCH_BHCR_BSEL_MASK (0x7f << BCH_BHCR_BSEL_SHIFT)
+#define BCH_BHCR_ENCE BIT(2)
+#define BCH_BHCR_INIT BIT(1)
+#define BCH_BHCR_BCHE BIT(0)
+
+#define BCH_BHCNT_PARITYSIZE_SHIFT 16
+#define BCH_BHCNT_PARITYSIZE_MASK (0x7f << BCH_BHCNT_PARITYSIZE_SHIFT)
+#define BCH_BHCNT_BLOCKSIZE_SHIFT 0
+#define BCH_BHCNT_BLOCKSIZE_MASK (0x7ff << BCH_BHCNT_BLOCKSIZE_SHIFT)
+
+#define BCH_BHERR_MASK_SHIFT 16
+#define BCH_BHERR_MASK_MASK (0xffff << BCH_BHERR_MASK_SHIFT)
+#define BCH_BHERR_INDEX_SHIFT 0
+#define BCH_BHERR_INDEX_MASK (0x7ff << BCH_BHERR_INDEX_SHIFT)
+
+#define BCH_BHINT_ERRC_SHIFT 24
+#define BCH_BHINT_ERRC_MASK (0x7f << BCH_BHINT_ERRC_SHIFT)
+#define BCH_BHINT_TERRC_SHIFT 16
+#define BCH_BHINT_TERRC_MASK (0x7f << BCH_BHINT_TERRC_SHIFT)
+#define BCH_BHINT_DECF BIT(3)
+#define BCH_BHINT_ENCF BIT(2)
+#define BCH_BHINT_UNCOR BIT(1)
+#define BCH_BHINT_ERR BIT(0)
+
+#define BCH_CLK_RATE (200 * 1000 * 1000)
+
+/* Timeout for BCH calculation/correction. */
+#define BCH_TIMEOUT_US 100000
+
+static void jz4780_bch_reset(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params, bool encode)
+{
+ u32 reg;
+
+ /* Clear interrupt status. */
+ writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+ /* Set up BCH count register. */
+ reg = params->size << BCH_BHCNT_BLOCKSIZE_SHIFT;
+ reg |= params->bytes << BCH_BHCNT_PARITYSIZE_SHIFT;
+ writel(reg, bch->base + BCH_BHCNT);
+
+ /* Initialise and enable BCH. */
+ reg = BCH_BHCR_BCHE | BCH_BHCR_INIT;
+ reg |= params->strength << BCH_BHCR_BSEL_SHIFT;
+ if (encode)
+ reg |= BCH_BHCR_ENCE;
+ writel(reg, bch->base + BCH_BHCR);
+}
+
+static void jz4780_bch_disable(struct ingenic_ecc *bch)
+{
+ writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+ writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR);
+}
+
+static void jz4780_bch_write_data(struct ingenic_ecc *bch, const void *buf,
+ size_t size)
+{
+ size_t size32 = size / sizeof(u32);
+ size_t size8 = size % sizeof(u32);
+ const u32 *src32;
+ const u8 *src8;
+
+ src32 = (const u32 *)buf;
+ while (size32--)
+ writel(*src32++, bch->base + BCH_BHDR);
+
+ src8 = (const u8 *)src32;
+ while (size8--)
+ writeb(*src8++, bch->base + BCH_BHDR);
+}
+
+static void jz4780_bch_read_parity(struct ingenic_ecc *bch, void *buf,
+ size_t size)
+{
+ size_t size32 = size / sizeof(u32);
+ size_t size8 = size % sizeof(u32);
+ u32 *dest32;
+ u8 *dest8;
+ u32 val, offset = 0;
+
+ dest32 = (u32 *)buf;
+ while (size32--) {
+ *dest32++ = readl(bch->base + BCH_BHPAR0 + offset);
+ offset += sizeof(u32);
+ }
+
+ dest8 = (u8 *)dest32;
+ val = readl(bch->base + BCH_BHPAR0 + offset);
+ switch (size8) {
+ case 3:
+ dest8[2] = (val >> 16) & 0xff;
+ fallthrough;
+ case 2:
+ dest8[1] = (val >> 8) & 0xff;
+ fallthrough;
+ case 1:
+ dest8[0] = val & 0xff;
+ break;
+ }
+}
+
+static bool jz4780_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
+ u32 *status)
+{
+ u32 reg;
+ int ret;
+
+ /*
+ * While we could use interrupts here and sleep until the operation
+ * completes, the controller works fairly quickly (usually a few
+ * microseconds) and so the overhead of sleeping until we get an
+ * interrupt quite noticeably decreases performance.
+ */
+ ret = readl_poll_timeout(bch->base + BCH_BHINT, reg,
+ (reg & irq) == irq, 0, BCH_TIMEOUT_US);
+ if (ret)
+ return false;
+
+ if (status)
+ *status = reg;
+
+ writel(reg, bch->base + BCH_BHINT);
+ return true;
+}
+
+static int jz4780_calculate(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code)
+{
+ int ret = 0;
+
+ mutex_lock(&bch->lock);
+
+ jz4780_bch_reset(bch, params, true);
+ jz4780_bch_write_data(bch, buf, params->size);
+
+ if (jz4780_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL)) {
+ jz4780_bch_read_parity(bch, ecc_code, params->bytes);
+ } else {
+ dev_err(bch->dev, "timed out while calculating ECC\n");
+ ret = -ETIMEDOUT;
+ }
+
+ jz4780_bch_disable(bch);
+ mutex_unlock(&bch->lock);
+ return ret;
+}
+
+static int jz4780_correct(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params,
+ u8 *buf, u8 *ecc_code)
+{
+ u32 reg, mask, index;
+ int i, ret, count;
+
+ mutex_lock(&bch->lock);
+
+ jz4780_bch_reset(bch, params, false);
+ jz4780_bch_write_data(bch, buf, params->size);
+ jz4780_bch_write_data(bch, ecc_code, params->bytes);
+
+ if (!jz4780_bch_wait_complete(bch, BCH_BHINT_DECF, &reg)) {
+ dev_err(bch->dev, "timed out while correcting data\n");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ if (reg & BCH_BHINT_UNCOR) {
+ dev_warn(bch->dev, "uncorrectable ECC error\n");
+ ret = -EBADMSG;
+ goto out;
+ }
+
+ /* Correct any detected errors. */
+ if (reg & BCH_BHINT_ERR) {
+ count = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
+ ret = (reg & BCH_BHINT_TERRC_MASK) >> BCH_BHINT_TERRC_SHIFT;
+
+ for (i = 0; i < count; i++) {
+ reg = readl(bch->base + BCH_BHERR0 + (i * 4));
+ mask = (reg & BCH_BHERR_MASK_MASK) >>
+ BCH_BHERR_MASK_SHIFT;
+ index = (reg & BCH_BHERR_INDEX_MASK) >>
+ BCH_BHERR_INDEX_SHIFT;
+ buf[(index * 2) + 0] ^= mask;
+ buf[(index * 2) + 1] ^= mask >> 8;
+ }
+ } else {
+ ret = 0;
+ }
+
+out:
+ jz4780_bch_disable(bch);
+ mutex_unlock(&bch->lock);
+ return ret;
+}
+
+static int jz4780_bch_probe(struct platform_device *pdev)
+{
+ struct ingenic_ecc *bch;
+ int ret;
+
+ ret = ingenic_ecc_probe(pdev);
+ if (ret)
+ return ret;
+
+ bch = platform_get_drvdata(pdev);
+ clk_set_rate(bch->clk, BCH_CLK_RATE);
+
+ return 0;
+}
+
+static const struct ingenic_ecc_ops jz4780_bch_ops = {
+ .disable = jz4780_bch_disable,
+ .calculate = jz4780_calculate,
+ .correct = jz4780_correct,
+};
+
+static const struct of_device_id jz4780_bch_dt_match[] = {
+ { .compatible = "ingenic,jz4780-bch", .data = &jz4780_bch_ops },
+ {},
+};
+MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match);
+
+static struct platform_driver jz4780_bch_driver = {
+ .probe = jz4780_bch_probe,
+ .driver = {
+ .name = "jz4780-bch",
+ .of_match_table = jz4780_bch_dt_match,
+ },
+};
+module_platform_driver(jz4780_bch_driver);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
+MODULE_DESCRIPTION("Ingenic JZ4780 BCH error correction driver");
+MODULE_LICENSE("GPL v2");