Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

30 files changed, 11464 insertions, 0 deletions

diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
new file mode 100644
index 0000000000..24cd25de2b
--- /dev/null
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig MTD_SPI_NOR
+	tristate "SPI NOR device support"
+	depends on MTD
+	depends on MTD && SPI_MASTER
+	select SPI_MEM
+	help
+	  This is the framework for the SPI NOR which can be used by the SPI
+	  device drivers and the SPI NOR device driver.
+
+if MTD_SPI_NOR
+
+config MTD_SPI_NOR_USE_4K_SECTORS
+	bool "Use small 4096 B erase sectors"
+	default y
+	help
+	  Many flash memories support erasing small (4096 B) sectors. Depending
+	  on the usage this feature may provide performance gain in comparison
+	  to erasing whole blocks (32/64 KiB).
+	  Changing a small part of the flash's contents is usually faster with
+	  small sectors. On the other hand erasing should be faster when using
+	  64 KiB block instead of 16 × 4 KiB sectors.
+
+	  Please note that some tools/drivers/filesystems may not work with
+	  4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
+
+choice
+	prompt "Software write protection at boot"
+	default MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE
+
+config MTD_SPI_NOR_SWP_DISABLE
+	bool "Disable SWP on any flashes (legacy behavior)"
+	help
+	  This option disables the software write protection on any SPI
+	  flashes at boot-up.
+
+	  Depending on the flash chip this either clears the block protection
+	  bits or does a "Global Unprotect" command.
+
+	  Don't use this if you intent to use the software write protection
+	  of your SPI flash. This is only to keep backwards compatibility.
+
+config MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE
+	bool "Disable SWP on flashes w/ volatile protection bits"
+	help
+	  Some SPI flashes have volatile block protection bits, ie. after a
+	  power-up or a reset the flash is software write protected by
+	  default.
+
+	  This option disables the software write protection for these kind
+	  of flashes while keeping it enabled for any other SPI flashes
+	  which have non-volatile write protection bits.
+
+	  If the software write protection will be disabled depending on
+	  the flash either the block protection bits are cleared or a
+	  "Global Unprotect" command is issued.
+
+	  If you are unsure, select this option.
+
+config MTD_SPI_NOR_SWP_KEEP
+	bool "Keep software write protection as is"
+	help
+	  If you select this option the software write protection of any
+	  SPI flashes will not be changed. If your flash is software write
+	  protected or will be automatically software write protected after
+	  power-up you have to manually unlock it before you are able to
+	  write to it.
+
+endchoice
+
+source "drivers/mtd/spi-nor/controllers/Kconfig"
+
+endif # MTD_SPI_NOR
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
new file mode 100644
index 0000000000..e347b435a0
--- /dev/null
+++ b/drivers/mtd/spi-nor/Makefile
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+
+spi-nor-objs			:= core.o sfdp.o swp.o otp.o sysfs.o
+spi-nor-objs			+= atmel.o
+spi-nor-objs			+= catalyst.o
+spi-nor-objs			+= eon.o
+spi-nor-objs			+= esmt.o
+spi-nor-objs			+= everspin.o
+spi-nor-objs			+= fujitsu.o
+spi-nor-objs			+= gigadevice.o
+spi-nor-objs			+= intel.o
+spi-nor-objs			+= issi.o
+spi-nor-objs			+= macronix.o
+spi-nor-objs			+= micron-st.o
+spi-nor-objs			+= spansion.o
+spi-nor-objs			+= sst.o
+spi-nor-objs			+= winbond.o
+spi-nor-objs			+= xilinx.o
+spi-nor-objs			+= xmc.o
+spi-nor-$(CONFIG_DEBUG_FS)	+= debugfs.o
+obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
+
+obj-$(CONFIG_MTD_SPI_NOR)	+= controllers/
diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
new file mode 100644
index 0000000000..58968c1e7d
--- /dev/null
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+#define ATMEL_SR_GLOBAL_PROTECT_MASK GENMASK(5, 2)
+
+/*
+ * The Atmel AT25FS010/AT25FS040 parts have some weird configuration for the
+ * block protection bits. We don't support them. But legacy behavior in linux
+ * is to unlock the whole flash array on startup. Therefore, we have to support
+ * exactly this operation.
+ */
+static int at25fs_nor_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	return -EOPNOTSUPP;
+}
+
+static int at25fs_nor_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	int ret;
+
+	/* We only support unlocking the whole flash array */
+	if (ofs || len != nor->params->size)
+		return -EINVAL;
+
+	/* Write 0x00 to the status register to disable write protection */
+	ret = spi_nor_write_sr_and_check(nor, 0);
+	if (ret)
+		dev_dbg(nor->dev, "unable to clear BP bits, WP# asserted?\n");
+
+	return ret;
+}
+
+static int at25fs_nor_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	return -EOPNOTSUPP;
+}
+
+static const struct spi_nor_locking_ops at25fs_nor_locking_ops = {
+	.lock = at25fs_nor_lock,
+	.unlock = at25fs_nor_unlock,
+	.is_locked = at25fs_nor_is_locked,
+};
+
+static int at25fs_nor_late_init(struct spi_nor *nor)
+{
+	nor->params->locking_ops = &at25fs_nor_locking_ops;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups at25fs_nor_fixups = {
+	.late_init = at25fs_nor_late_init,
+};
+
+/**
+ * atmel_nor_set_global_protection - Do a Global Protect or Unprotect command
+ * @nor:	pointer to 'struct spi_nor'
+ * @ofs:	offset in bytes
+ * @len:	len in bytes
+ * @is_protect:	if true do a Global Protect otherwise it is a Global Unprotect
+ *
+ * Return: 0 on success, -error otherwise.
+ */
+static int atmel_nor_set_global_protection(struct spi_nor *nor, loff_t ofs,
+					   uint64_t len, bool is_protect)
+{
+	int ret;
+	u8 sr;
+
+	/* We only support locking the whole flash array */
+	if (ofs || len != nor->params->size)
+		return -EINVAL;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	sr = nor->bouncebuf[0];
+
+	/* SRWD bit needs to be cleared, otherwise the protection doesn't change */
+	if (sr & SR_SRWD) {
+		sr &= ~SR_SRWD;
+		ret = spi_nor_write_sr_and_check(nor, sr);
+		if (ret) {
+			dev_dbg(nor->dev, "unable to clear SRWD bit, WP# asserted?\n");
+			return ret;
+		}
+	}
+
+	if (is_protect) {
+		sr |= ATMEL_SR_GLOBAL_PROTECT_MASK;
+		/*
+		 * Set the SRWD bit again as soon as we are protecting
+		 * anything. This will ensure that the WP# pin is working
+		 * correctly. By doing this we also behave the same as
+		 * spi_nor_sr_lock(), which sets SRWD if any block protection
+		 * is active.
+		 */
+		sr |= SR_SRWD;
+	} else {
+		sr &= ~ATMEL_SR_GLOBAL_PROTECT_MASK;
+	}
+
+	nor->bouncebuf[0] = sr;
+
+	/*
+	 * We cannot use the spi_nor_write_sr_and_check() because this command
+	 * isn't really setting any bits, instead it is an pseudo command for
+	 * "Global Unprotect" or "Global Protect"
+	 */
+	return spi_nor_write_sr(nor, nor->bouncebuf, 1);
+}
+
+static int atmel_nor_global_protect(struct spi_nor *nor, loff_t ofs,
+				    uint64_t len)
+{
+	return atmel_nor_set_global_protection(nor, ofs, len, true);
+}
+
+static int atmel_nor_global_unprotect(struct spi_nor *nor, loff_t ofs,
+				      uint64_t len)
+{
+	return atmel_nor_set_global_protection(nor, ofs, len, false);
+}
+
+static int atmel_nor_is_global_protected(struct spi_nor *nor, loff_t ofs,
+					 uint64_t len)
+{
+	int ret;
+
+	if (ofs >= nor->params->size || (ofs + len) > nor->params->size)
+		return -EINVAL;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	return ((nor->bouncebuf[0] & ATMEL_SR_GLOBAL_PROTECT_MASK) == ATMEL_SR_GLOBAL_PROTECT_MASK);
+}
+
+static const struct spi_nor_locking_ops atmel_nor_global_protection_ops = {
+	.lock = atmel_nor_global_protect,
+	.unlock = atmel_nor_global_unprotect,
+	.is_locked = atmel_nor_is_global_protected,
+};
+
+static int atmel_nor_global_protection_late_init(struct spi_nor *nor)
+{
+	nor->params->locking_ops = &atmel_nor_global_protection_ops;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups atmel_nor_global_protection_fixups = {
+	.late_init = atmel_nor_global_protection_late_init,
+};
+
+static const struct flash_info atmel_nor_parts[] = {
+	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
+	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &at25fs_nor_fixups },
+	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &at25fs_nor_fixups },
+	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_nor_global_protection_fixups },
+	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_nor_global_protection_fixups },
+	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_nor_global_protection_fixups },
+	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_nor_global_protection_fixups },
+	{ "at25sl321",	INFO(0x1f4216, 0, 64 * 1024, 64)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_nor_global_protection_fixups },
+	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_nor_global_protection_fixups },
+	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_nor_global_protection_fixups },
+	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16)
+		NO_SFDP_FLAGS(SECT_4K) },
+};
+
+const struct spi_nor_manufacturer spi_nor_atmel = {
+	.name = "atmel",
+	.parts = atmel_nor_parts,
+	.nparts = ARRAY_SIZE(atmel_nor_parts),
+};
diff --git a/drivers/mtd/spi-nor/catalyst.c b/drivers/mtd/spi-nor/catalyst.c
new file mode 100644
index 0000000000..6d310815fb
--- /dev/null
+++ b/drivers/mtd/spi-nor/catalyst.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info catalyst_nor_parts[] = {
+	/* Catalyst / On Semiconductor -- non-JEDEC */
+	{ "cat25c11", CAT25_INFO(16, 8, 16, 1) },
+	{ "cat25c03", CAT25_INFO(32, 8, 16, 2) },
+	{ "cat25c09", CAT25_INFO(128, 8, 32, 2) },
+	{ "cat25c17", CAT25_INFO(256, 8, 32, 2) },
+	{ "cat25128", CAT25_INFO(2048, 8, 64, 2) },
+};
+
+const struct spi_nor_manufacturer spi_nor_catalyst = {
+	.name = "catalyst",
+	.parts = catalyst_nor_parts,
+	.nparts = ARRAY_SIZE(catalyst_nor_parts),
+};
diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig
new file mode 100644
index 0000000000..ca45dcd3ff
--- /dev/null
+++ b/drivers/mtd/spi-nor/controllers/Kconfig
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config SPI_HISI_SFC
+	tristate "Hisilicon FMC SPI NOR Flash Controller(SFC)"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This enables support for HiSilicon FMC SPI NOR flash controller.
+
+config SPI_NXP_SPIFI
+	tristate "NXP SPI Flash Interface (SPIFI)"
+	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+	depends on HAS_IOMEM
+	help
+	  Enable support for the NXP LPC SPI Flash Interface controller.
+
+	  SPIFI is a specialized controller for connecting serial SPI
+	  Flash. Enable this option if you have a device with a SPIFI
+	  controller and want to access the Flash as a mtd device.
diff --git a/drivers/mtd/spi-nor/controllers/Makefile b/drivers/mtd/spi-nor/controllers/Makefile
new file mode 100644
index 0000000000..0b8e1d5309
--- /dev/null
+++ b/drivers/mtd/spi-nor/controllers/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o
+obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
diff --git a/drivers/mtd/spi-nor/controllers/hisi-sfc.c b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
new file mode 100644
index 0000000000..5070d72835
--- /dev/null
+++ b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HiSilicon FMC SPI NOR flash controller driver
+ *
+ * Copyright (c) 2015-2016 HiSilicon Technologies Co., Ltd.
+ */
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* Hardware register offsets and field definitions */
+#define FMC_CFG				0x00
+#define FMC_CFG_OP_MODE_MASK		BIT_MASK(0)
+#define FMC_CFG_OP_MODE_BOOT		0
+#define FMC_CFG_OP_MODE_NORMAL		1
+#define FMC_CFG_FLASH_SEL(type)		(((type) & 0x3) << 1)
+#define FMC_CFG_FLASH_SEL_MASK		0x6
+#define FMC_ECC_TYPE(type)		(((type) & 0x7) << 5)
+#define FMC_ECC_TYPE_MASK		GENMASK(7, 5)
+#define SPI_NOR_ADDR_MODE_MASK		BIT_MASK(10)
+#define SPI_NOR_ADDR_MODE_3BYTES	(0x0 << 10)
+#define SPI_NOR_ADDR_MODE_4BYTES	(0x1 << 10)
+#define FMC_GLOBAL_CFG			0x04
+#define FMC_GLOBAL_CFG_WP_ENABLE	BIT(6)
+#define FMC_SPI_TIMING_CFG		0x08
+#define TIMING_CFG_TCSH(nr)		(((nr) & 0xf) << 8)
+#define TIMING_CFG_TCSS(nr)		(((nr) & 0xf) << 4)
+#define TIMING_CFG_TSHSL(nr)		((nr) & 0xf)
+#define CS_HOLD_TIME			0x6
+#define CS_SETUP_TIME			0x6
+#define CS_DESELECT_TIME		0xf
+#define FMC_INT				0x18
+#define FMC_INT_OP_DONE			BIT(0)
+#define FMC_INT_CLR			0x20
+#define FMC_CMD				0x24
+#define FMC_CMD_CMD1(cmd)		((cmd) & 0xff)
+#define FMC_ADDRL			0x2c
+#define FMC_OP_CFG			0x30
+#define OP_CFG_FM_CS(cs)		((cs) << 11)
+#define OP_CFG_MEM_IF_TYPE(type)	(((type) & 0x7) << 7)
+#define OP_CFG_ADDR_NUM(addr)		(((addr) & 0x7) << 4)
+#define OP_CFG_DUMMY_NUM(dummy)		((dummy) & 0xf)
+#define FMC_DATA_NUM			0x38
+#define FMC_DATA_NUM_CNT(cnt)		((cnt) & GENMASK(13, 0))
+#define FMC_OP				0x3c
+#define FMC_OP_DUMMY_EN			BIT(8)
+#define FMC_OP_CMD1_EN			BIT(7)
+#define FMC_OP_ADDR_EN			BIT(6)
+#define FMC_OP_WRITE_DATA_EN		BIT(5)
+#define FMC_OP_READ_DATA_EN		BIT(2)
+#define FMC_OP_READ_STATUS_EN		BIT(1)
+#define FMC_OP_REG_OP_START		BIT(0)
+#define FMC_DMA_LEN			0x40
+#define FMC_DMA_LEN_SET(len)		((len) & GENMASK(27, 0))
+#define FMC_DMA_SADDR_D0		0x4c
+#define HIFMC_DMA_MAX_LEN		(4096)
+#define HIFMC_DMA_MASK			(HIFMC_DMA_MAX_LEN - 1)
+#define FMC_OP_DMA			0x68
+#define OP_CTRL_RD_OPCODE(code)		(((code) & 0xff) << 16)
+#define OP_CTRL_WR_OPCODE(code)		(((code) & 0xff) << 8)
+#define OP_CTRL_RW_OP(op)		((op) << 1)
+#define OP_CTRL_DMA_OP_READY		BIT(0)
+#define FMC_OP_READ			0x0
+#define FMC_OP_WRITE			0x1
+#define FMC_WAIT_TIMEOUT		1000000
+
+enum hifmc_iftype {
+	IF_TYPE_STD,
+	IF_TYPE_DUAL,
+	IF_TYPE_DIO,
+	IF_TYPE_QUAD,
+	IF_TYPE_QIO,
+};
+
+struct hifmc_priv {
+	u32 chipselect;
+	u32 clkrate;
+	struct hifmc_host *host;
+};
+
+#define HIFMC_MAX_CHIP_NUM		2
+struct hifmc_host {
+	struct device *dev;
+	struct mutex lock;
+
+	void __iomem *regbase;
+	void __iomem *iobase;
+	struct clk *clk;
+	void *buffer;
+	dma_addr_t dma_buffer;
+
+	struct spi_nor	*nor[HIFMC_MAX_CHIP_NUM];
+	u32 num_chip;
+};
+
+static inline int hisi_spi_nor_wait_op_finish(struct hifmc_host *host)
+{
+	u32 reg;
+
+	return readl_poll_timeout(host->regbase + FMC_INT, reg,
+		(reg & FMC_INT_OP_DONE), 0, FMC_WAIT_TIMEOUT);
+}
+
+static int hisi_spi_nor_get_if_type(enum spi_nor_protocol proto)
+{
+	enum hifmc_iftype if_type;
+
+	switch (proto) {
+	case SNOR_PROTO_1_1_2:
+		if_type = IF_TYPE_DUAL;
+		break;
+	case SNOR_PROTO_1_2_2:
+		if_type = IF_TYPE_DIO;
+		break;
+	case SNOR_PROTO_1_1_4:
+		if_type = IF_TYPE_QUAD;
+		break;
+	case SNOR_PROTO_1_4_4:
+		if_type = IF_TYPE_QIO;
+		break;
+	case SNOR_PROTO_1_1_1:
+	default:
+		if_type = IF_TYPE_STD;
+		break;
+	}
+
+	return if_type;
+}
+
+static void hisi_spi_nor_init(struct hifmc_host *host)
+{
+	u32 reg;
+
+	reg = TIMING_CFG_TCSH(CS_HOLD_TIME)
+		| TIMING_CFG_TCSS(CS_SETUP_TIME)
+		| TIMING_CFG_TSHSL(CS_DESELECT_TIME);
+	writel(reg, host->regbase + FMC_SPI_TIMING_CFG);
+}
+
+static int hisi_spi_nor_prep(struct spi_nor *nor)
+{
+	struct hifmc_priv *priv = nor->priv;
+	struct hifmc_host *host = priv->host;
+	int ret;
+
+	mutex_lock(&host->lock);
+
+	ret = clk_set_rate(host->clk, priv->clkrate);
+	if (ret)
+		goto out;
+
+	ret = clk_prepare_enable(host->clk);
+	if (ret)
+		goto out;
+
+	return 0;
+
+out:
+	mutex_unlock(&host->lock);
+	return ret;
+}
+
+static void hisi_spi_nor_unprep(struct spi_nor *nor)
+{
+	struct hifmc_priv *priv = nor->priv;
+	struct hifmc_host *host = priv->host;
+
+	clk_disable_unprepare(host->clk);
+	mutex_unlock(&host->lock);
+}
+
+static int hisi_spi_nor_op_reg(struct spi_nor *nor,
+				u8 opcode, size_t len, u8 optype)
+{
+	struct hifmc_priv *priv = nor->priv;
+	struct hifmc_host *host = priv->host;
+	u32 reg;
+
+	reg = FMC_CMD_CMD1(opcode);
+	writel(reg, host->regbase + FMC_CMD);
+
+	reg = FMC_DATA_NUM_CNT(len);
+	writel(reg, host->regbase + FMC_DATA_NUM);
+
+	reg = OP_CFG_FM_CS(priv->chipselect);
+	writel(reg, host->regbase + FMC_OP_CFG);
+
+	writel(0xff, host->regbase + FMC_INT_CLR);
+	reg = FMC_OP_CMD1_EN | FMC_OP_REG_OP_START | optype;
+	writel(reg, host->regbase + FMC_OP);
+
+	return hisi_spi_nor_wait_op_finish(host);
+}
+
+static int hisi_spi_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+				 size_t len)
+{
+	struct hifmc_priv *priv = nor->priv;
+	struct hifmc_host *host = priv->host;
+	int ret;
+
+	ret = hisi_spi_nor_op_reg(nor, opcode, len, FMC_OP_READ_DATA_EN);
+	if (ret)
+		return ret;
+
+	memcpy_fromio(buf, host->iobase, len);
+	return 0;
+}
+
+static int hisi_spi_nor_write_reg(struct spi_nor *nor, u8 opcode,
+				  const u8 *buf, size_t len)
+{
+	struct hifmc_priv *priv = nor->priv;
+	struct hifmc_host *host = priv->host;
+
+	if (len)
+		memcpy_toio(host->iobase, buf, len);
+
+	return hisi_spi_nor_op_reg(nor, opcode, len, FMC_OP_WRITE_DATA_EN);
+}
+
+static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
+		dma_addr_t dma_buf, size_t len, u8 op_type)
+{
+	struct hifmc_priv *priv = nor->priv;
+	struct hifmc_host *host = priv->host;
+	u8 if_type = 0;
+	u32 reg;
+
+	reg = readl(host->regbase + FMC_CFG);
+	reg &= ~(FMC_CFG_OP_MODE_MASK | SPI_NOR_ADDR_MODE_MASK);
+	reg |= FMC_CFG_OP_MODE_NORMAL;
+	reg |= (nor->addr_nbytes == 4) ? SPI_NOR_ADDR_MODE_4BYTES
+		: SPI_NOR_ADDR_MODE_3BYTES;
+	writel(reg, host->regbase + FMC_CFG);
+
+	writel(start_off, host->regbase + FMC_ADDRL);
+	writel(dma_buf, host->regbase + FMC_DMA_SADDR_D0);
+	writel(FMC_DMA_LEN_SET(len), host->regbase + FMC_DMA_LEN);
+
+	reg = OP_CFG_FM_CS(priv->chipselect);
+	if (op_type == FMC_OP_READ)
+		if_type = hisi_spi_nor_get_if_type(nor->read_proto);
+	else
+		if_type = hisi_spi_nor_get_if_type(nor->write_proto);
+	reg |= OP_CFG_MEM_IF_TYPE(if_type);
+	if (op_type == FMC_OP_READ)
+		reg |= OP_CFG_DUMMY_NUM(nor->read_dummy >> 3);
+	writel(reg, host->regbase + FMC_OP_CFG);
+
+	writel(0xff, host->regbase + FMC_INT_CLR);
+	reg = OP_CTRL_RW_OP(op_type) | OP_CTRL_DMA_OP_READY;
+	reg |= (op_type == FMC_OP_READ)
+		? OP_CTRL_RD_OPCODE(nor->read_opcode)
+		: OP_CTRL_WR_OPCODE(nor->program_opcode);
+	writel(reg, host->regbase + FMC_OP_DMA);
+
+	return hisi_spi_nor_wait_op_finish(host);
+}
+
+static ssize_t hisi_spi_nor_read(struct spi_nor *nor, loff_t from, size_t len,
+		u_char *read_buf)
+{
+	struct hifmc_priv *priv = nor->priv;
+	struct hifmc_host *host = priv->host;
+	size_t offset;
+	int ret;
+
+	for (offset = 0; offset < len; offset += HIFMC_DMA_MAX_LEN) {
+		size_t trans = min_t(size_t, HIFMC_DMA_MAX_LEN, len - offset);
+
+		ret = hisi_spi_nor_dma_transfer(nor,
+			from + offset, host->dma_buffer, trans, FMC_OP_READ);
+		if (ret) {
+			dev_warn(nor->dev, "DMA read timeout\n");
+			return ret;
+		}
+		memcpy(read_buf + offset, host->buffer, trans);
+	}
+
+	return len;
+}
+
+static ssize_t hisi_spi_nor_write(struct spi_nor *nor, loff_t to,
+			size_t len, const u_char *write_buf)
+{
+	struct hifmc_priv *priv = nor->priv;
+	struct hifmc_host *host = priv->host;
+	size_t offset;
+	int ret;
+
+	for (offset = 0; offset < len; offset += HIFMC_DMA_MAX_LEN) {
+		size_t trans = min_t(size_t, HIFMC_DMA_MAX_LEN, len - offset);
+
+		memcpy(host->buffer, write_buf + offset, trans);
+		ret = hisi_spi_nor_dma_transfer(nor,
+			to + offset, host->dma_buffer, trans, FMC_OP_WRITE);
+		if (ret) {
+			dev_warn(nor->dev, "DMA write timeout\n");
+			return ret;
+		}
+	}
+
+	return len;
+}
+
+static const struct spi_nor_controller_ops hisi_controller_ops = {
+	.prepare = hisi_spi_nor_prep,
+	.unprepare = hisi_spi_nor_unprep,
+	.read_reg = hisi_spi_nor_read_reg,
+	.write_reg = hisi_spi_nor_write_reg,
+	.read = hisi_spi_nor_read,
+	.write = hisi_spi_nor_write,
+};
+
+/*
+ * Get spi flash device information and register it as a mtd device.
+ */
+static int hisi_spi_nor_register(struct device_node *np,
+				struct hifmc_host *host)
+{
+	const struct spi_nor_hwcaps hwcaps = {
+		.mask = SNOR_HWCAPS_READ |
+			SNOR_HWCAPS_READ_FAST |
+			SNOR_HWCAPS_READ_1_1_2 |
+			SNOR_HWCAPS_READ_1_1_4 |
+			SNOR_HWCAPS_PP,
+	};
+	struct device *dev = host->dev;
+	struct spi_nor *nor;
+	struct hifmc_priv *priv;
+	struct mtd_info *mtd;
+	int ret;
+
+	nor = devm_kzalloc(dev, sizeof(*nor), GFP_KERNEL);
+	if (!nor)
+		return -ENOMEM;
+
+	nor->dev = dev;
+	spi_nor_set_flash_node(nor, np);
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ret = of_property_read_u32(np, "reg", &priv->chipselect);
+	if (ret) {
+		dev_err(dev, "There's no reg property for %pOF\n",
+			np);
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "spi-max-frequency",
+			&priv->clkrate);
+	if (ret) {
+		dev_err(dev, "There's no spi-max-frequency property for %pOF\n",
+			np);
+		return ret;
+	}
+	priv->host = host;
+	nor->priv = priv;
+	nor->controller_ops = &hisi_controller_ops;
+
+	ret = spi_nor_scan(nor, NULL, &hwcaps);
+	if (ret)
+		return ret;
+
+	mtd = &nor->mtd;
+	mtd->name = np->name;
+	ret = mtd_device_register(mtd, NULL, 0);
+	if (ret)
+		return ret;
+
+	host->nor[host->num_chip] = nor;
+	host->num_chip++;
+	return 0;
+}
+
+static void hisi_spi_nor_unregister_all(struct hifmc_host *host)
+{
+	int i;
+
+	for (i = 0; i < host->num_chip; i++)
+		mtd_device_unregister(&host->nor[i]->mtd);
+}
+
+static int hisi_spi_nor_register_all(struct hifmc_host *host)
+{
+	struct device *dev = host->dev;
+	struct device_node *np;
+	int ret;
+
+	for_each_available_child_of_node(dev->of_node, np) {
+		ret = hisi_spi_nor_register(np, host);
+		if (ret) {
+			of_node_put(np);
+			goto fail;
+		}
+
+		if (host->num_chip == HIFMC_MAX_CHIP_NUM) {
+			dev_warn(dev, "Flash device number exceeds the maximum chipselect number\n");
+			of_node_put(np);
+			break;
+		}
+	}
+
+	return 0;
+
+fail:
+	hisi_spi_nor_unregister_all(host);
+	return ret;
+}
+
+static int hisi_spi_nor_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct hifmc_host *host;
+	int ret;
+
+	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, host);
+	host->dev = dev;
+
+	host->regbase = devm_platform_ioremap_resource_byname(pdev, "control");
+	if (IS_ERR(host->regbase))
+		return PTR_ERR(host->regbase);
+
+	host->iobase = devm_platform_ioremap_resource_byname(pdev, "memory");
+	if (IS_ERR(host->iobase))
+		return PTR_ERR(host->iobase);
+
+	host->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(host->clk))
+		return PTR_ERR(host->clk);
+
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_warn(dev, "Unable to set dma mask\n");
+		return ret;
+	}
+
+	host->buffer = dmam_alloc_coherent(dev, HIFMC_DMA_MAX_LEN,
+			&host->dma_buffer, GFP_KERNEL);
+	if (!host->buffer)
+		return -ENOMEM;
+
+	ret = clk_prepare_enable(host->clk);
+	if (ret)
+		return ret;
+
+	mutex_init(&host->lock);
+	hisi_spi_nor_init(host);
+	ret = hisi_spi_nor_register_all(host);
+	if (ret)
+		mutex_destroy(&host->lock);
+
+	clk_disable_unprepare(host->clk);
+	return ret;
+}
+
+static int hisi_spi_nor_remove(struct platform_device *pdev)
+{
+	struct hifmc_host *host = platform_get_drvdata(pdev);
+
+	hisi_spi_nor_unregister_all(host);
+	mutex_destroy(&host->lock);
+	return 0;
+}
+
+static const struct of_device_id hisi_spi_nor_dt_ids[] = {
+	{ .compatible = "hisilicon,fmc-spi-nor"},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, hisi_spi_nor_dt_ids);
+
+static struct platform_driver hisi_spi_nor_driver = {
+	.driver = {
+		.name	= "hisi-sfc",
+		.of_match_table = hisi_spi_nor_dt_ids,
+	},
+	.probe	= hisi_spi_nor_probe,
+	.remove	= hisi_spi_nor_remove,
+};
+module_platform_driver(hisi_spi_nor_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("HiSilicon SPI Nor Flash Controller Driver");
diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
new file mode 100644
index 0000000000..5d8f47ab14
--- /dev/null
+++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SPI NOR driver for NXP SPI Flash Interface (SPIFI)
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on Freescale QuadSPI driver:
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+/* NXP SPIFI registers, bits and macros */
+#define SPIFI_CTRL				0x000
+#define  SPIFI_CTRL_TIMEOUT(timeout)		(timeout)
+#define  SPIFI_CTRL_CSHIGH(cshigh)		((cshigh) << 16)
+#define  SPIFI_CTRL_MODE3			BIT(23)
+#define  SPIFI_CTRL_DUAL			BIT(28)
+#define  SPIFI_CTRL_FBCLK			BIT(30)
+#define SPIFI_CMD				0x004
+#define  SPIFI_CMD_DATALEN(dlen)		((dlen) & 0x3fff)
+#define  SPIFI_CMD_DOUT				BIT(15)
+#define  SPIFI_CMD_INTLEN(ilen)			((ilen) << 16)
+#define  SPIFI_CMD_FIELDFORM(field)		((field) << 19)
+#define  SPIFI_CMD_FIELDFORM_ALL_SERIAL		SPIFI_CMD_FIELDFORM(0x0)
+#define  SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA	SPIFI_CMD_FIELDFORM(0x1)
+#define  SPIFI_CMD_FRAMEFORM(frame)		((frame) << 21)
+#define  SPIFI_CMD_FRAMEFORM_OPCODE_ONLY	SPIFI_CMD_FRAMEFORM(0x1)
+#define  SPIFI_CMD_OPCODE(op)			((op) << 24)
+#define SPIFI_ADDR				0x008
+#define SPIFI_IDATA				0x00c
+#define SPIFI_CLIMIT				0x010
+#define SPIFI_DATA				0x014
+#define SPIFI_MCMD				0x018
+#define SPIFI_STAT				0x01c
+#define  SPIFI_STAT_MCINIT			BIT(0)
+#define  SPIFI_STAT_CMD				BIT(1)
+#define  SPIFI_STAT_RESET			BIT(4)
+
+#define SPI_NOR_MAX_ID_LEN	6
+
+struct nxp_spifi {
+	struct device *dev;
+	struct clk *clk_spifi;
+	struct clk *clk_reg;
+	void __iomem *io_base;
+	void __iomem *flash_base;
+	struct spi_nor nor;
+	bool memory_mode;
+	u32 mcmd;
+};
+
+static int nxp_spifi_wait_for_cmd(struct nxp_spifi *spifi)
+{
+	u8 stat;
+	int ret;
+
+	ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
+				 !(stat & SPIFI_STAT_CMD), 10, 30);
+	if (ret)
+		dev_warn(spifi->dev, "command timed out\n");
+
+	return ret;
+}
+
+static int nxp_spifi_reset(struct nxp_spifi *spifi)
+{
+	u8 stat;
+	int ret;
+
+	writel(SPIFI_STAT_RESET, spifi->io_base + SPIFI_STAT);
+	ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
+				 !(stat & SPIFI_STAT_RESET), 10, 30);
+	if (ret)
+		dev_warn(spifi->dev, "state reset timed out\n");
+
+	return ret;
+}
+
+static int nxp_spifi_set_memory_mode_off(struct nxp_spifi *spifi)
+{
+	int ret;
+
+	if (!spifi->memory_mode)
+		return 0;
+
+	ret = nxp_spifi_reset(spifi);
+	if (ret)
+		dev_err(spifi->dev, "unable to enter command mode\n");
+	else
+		spifi->memory_mode = false;
+
+	return ret;
+}
+
+static int nxp_spifi_set_memory_mode_on(struct nxp_spifi *spifi)
+{
+	u8 stat;
+	int ret;
+
+	if (spifi->memory_mode)
+		return 0;
+
+	writel(spifi->mcmd, spifi->io_base + SPIFI_MCMD);
+	ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
+				 stat & SPIFI_STAT_MCINIT, 10, 30);
+	if (ret)
+		dev_err(spifi->dev, "unable to enter memory mode\n");
+	else
+		spifi->memory_mode = true;
+
+	return ret;
+}
+
+static int nxp_spifi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+			      size_t len)
+{
+	struct nxp_spifi *spifi = nor->priv;
+	u32 cmd;
+	int ret;
+
+	ret = nxp_spifi_set_memory_mode_off(spifi);
+	if (ret)
+		return ret;
+
+	cmd = SPIFI_CMD_DATALEN(len) |
+	      SPIFI_CMD_OPCODE(opcode) |
+	      SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+	      SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
+	writel(cmd, spifi->io_base + SPIFI_CMD);
+
+	while (len--)
+		*buf++ = readb(spifi->io_base + SPIFI_DATA);
+
+	return nxp_spifi_wait_for_cmd(spifi);
+}
+
+static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
+			       size_t len)
+{
+	struct nxp_spifi *spifi = nor->priv;
+	u32 cmd;
+	int ret;
+
+	ret = nxp_spifi_set_memory_mode_off(spifi);
+	if (ret)
+		return ret;
+
+	cmd = SPIFI_CMD_DOUT |
+	      SPIFI_CMD_DATALEN(len) |
+	      SPIFI_CMD_OPCODE(opcode) |
+	      SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+	      SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
+	writel(cmd, spifi->io_base + SPIFI_CMD);
+
+	while (len--)
+		writeb(*buf++, spifi->io_base + SPIFI_DATA);
+
+	return nxp_spifi_wait_for_cmd(spifi);
+}
+
+static ssize_t nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len,
+			      u_char *buf)
+{
+	struct nxp_spifi *spifi = nor->priv;
+	int ret;
+
+	ret = nxp_spifi_set_memory_mode_on(spifi);
+	if (ret)
+		return ret;
+
+	memcpy_fromio(buf, spifi->flash_base + from, len);
+
+	return len;
+}
+
+static ssize_t nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
+			       const u_char *buf)
+{
+	struct nxp_spifi *spifi = nor->priv;
+	u32 cmd;
+	int ret;
+	size_t i;
+
+	ret = nxp_spifi_set_memory_mode_off(spifi);
+	if (ret)
+		return ret;
+
+	writel(to, spifi->io_base + SPIFI_ADDR);
+
+	cmd = SPIFI_CMD_DOUT |
+	      SPIFI_CMD_DATALEN(len) |
+	      SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+	      SPIFI_CMD_OPCODE(nor->program_opcode) |
+	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
+	writel(cmd, spifi->io_base + SPIFI_CMD);
+
+	for (i = 0; i < len; i++)
+		writeb(buf[i], spifi->io_base + SPIFI_DATA);
+
+	ret = nxp_spifi_wait_for_cmd(spifi);
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
+{
+	struct nxp_spifi *spifi = nor->priv;
+	u32 cmd;
+	int ret;
+
+	ret = nxp_spifi_set_memory_mode_off(spifi);
+	if (ret)
+		return ret;
+
+	writel(offs, spifi->io_base + SPIFI_ADDR);
+
+	cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+	      SPIFI_CMD_OPCODE(nor->erase_opcode) |
+	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
+	writel(cmd, spifi->io_base + SPIFI_CMD);
+
+	return nxp_spifi_wait_for_cmd(spifi);
+}
+
+static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
+{
+	switch (spifi->nor.read_proto) {
+	case SNOR_PROTO_1_1_1:
+		spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL;
+		break;
+	case SNOR_PROTO_1_1_2:
+	case SNOR_PROTO_1_1_4:
+		spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA;
+		break;
+	default:
+		dev_err(spifi->dev, "unsupported SPI read mode\n");
+		return -EINVAL;
+	}
+
+	/* Memory mode supports address length between 1 and 4 */
+	if (spifi->nor.addr_nbytes < 1 || spifi->nor.addr_nbytes > 4)
+		return -EINVAL;
+
+	spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) |
+		       SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) |
+		       SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
+
+	return 0;
+}
+
+static void nxp_spifi_dummy_id_read(struct spi_nor *nor)
+{
+	u8 id[SPI_NOR_MAX_ID_LEN];
+	nor->controller_ops->read_reg(nor, SPINOR_OP_RDID, id,
+				      SPI_NOR_MAX_ID_LEN);
+}
+
+static const struct spi_nor_controller_ops nxp_spifi_controller_ops = {
+	.read_reg  = nxp_spifi_read_reg,
+	.write_reg = nxp_spifi_write_reg,
+	.read  = nxp_spifi_read,
+	.write = nxp_spifi_write,
+	.erase = nxp_spifi_erase,
+};
+
+static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
+				 struct device_node *np)
+{
+	struct spi_nor_hwcaps hwcaps = {
+		.mask = SNOR_HWCAPS_READ |
+			SNOR_HWCAPS_READ_FAST |
+			SNOR_HWCAPS_PP,
+	};
+	u32 ctrl, property;
+	u16 mode = 0;
+	int ret;
+
+	if (!of_property_read_u32(np, "spi-rx-bus-width", &property)) {
+		switch (property) {
+		case 1:
+			break;
+		case 2:
+			mode |= SPI_RX_DUAL;
+			break;
+		case 4:
+			mode |= SPI_RX_QUAD;
+			break;
+		default:
+			dev_err(spifi->dev, "unsupported rx-bus-width\n");
+			return -EINVAL;
+		}
+	}
+
+	if (of_property_read_bool(np, "spi-cpha"))
+		mode |= SPI_CPHA;
+
+	if (of_property_read_bool(np, "spi-cpol"))
+		mode |= SPI_CPOL;
+
+	/* Setup control register defaults */
+	ctrl = SPIFI_CTRL_TIMEOUT(1000) |
+	       SPIFI_CTRL_CSHIGH(15) |
+	       SPIFI_CTRL_FBCLK;
+
+	if (mode & SPI_RX_DUAL) {
+		ctrl |= SPIFI_CTRL_DUAL;
+		hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
+	} else if (mode & SPI_RX_QUAD) {
+		ctrl &= ~SPIFI_CTRL_DUAL;
+		hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
+	} else {
+		ctrl |= SPIFI_CTRL_DUAL;
+	}
+
+	switch (mode & SPI_MODE_X_MASK) {
+	case SPI_MODE_0:
+		ctrl &= ~SPIFI_CTRL_MODE3;
+		break;
+	case SPI_MODE_3:
+		ctrl |= SPIFI_CTRL_MODE3;
+		break;
+	default:
+		dev_err(spifi->dev, "only mode 0 and 3 supported\n");
+		return -EINVAL;
+	}
+
+	writel(ctrl, spifi->io_base + SPIFI_CTRL);
+
+	spifi->nor.dev   = spifi->dev;
+	spi_nor_set_flash_node(&spifi->nor, np);
+	spifi->nor.priv  = spifi;
+	spifi->nor.controller_ops = &nxp_spifi_controller_ops;
+
+	/*
+	 * The first read on a hard reset isn't reliable so do a
+	 * dummy read of the id before calling spi_nor_scan().
+	 * The reason for this problem is unknown.
+	 *
+	 * The official NXP spifilib uses more or less the same
+	 * workaround that is applied here by reading the device
+	 * id multiple times.
+	 */
+	nxp_spifi_dummy_id_read(&spifi->nor);
+
+	ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps);
+	if (ret) {
+		dev_err(spifi->dev, "device scan failed\n");
+		return ret;
+	}
+
+	ret = nxp_spifi_setup_memory_cmd(spifi);
+	if (ret) {
+		dev_err(spifi->dev, "memory command setup failed\n");
+		return ret;
+	}
+
+	ret = mtd_device_register(&spifi->nor.mtd, NULL, 0);
+	if (ret) {
+		dev_err(spifi->dev, "mtd device parse failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int nxp_spifi_probe(struct platform_device *pdev)
+{
+	struct device_node *flash_np;
+	struct nxp_spifi *spifi;
+	int ret;
+
+	spifi = devm_kzalloc(&pdev->dev, sizeof(*spifi), GFP_KERNEL);
+	if (!spifi)
+		return -ENOMEM;
+
+	spifi->io_base = devm_platform_ioremap_resource_byname(pdev, "spifi");
+	if (IS_ERR(spifi->io_base))
+		return PTR_ERR(spifi->io_base);
+
+	spifi->flash_base = devm_platform_ioremap_resource_byname(pdev, "flash");
+	if (IS_ERR(spifi->flash_base))
+		return PTR_ERR(spifi->flash_base);
+
+	spifi->clk_spifi = devm_clk_get_enabled(&pdev->dev, "spifi");
+	if (IS_ERR(spifi->clk_spifi)) {
+		dev_err(&pdev->dev, "spifi clock not found or unable to enable\n");
+		return PTR_ERR(spifi->clk_spifi);
+	}
+
+	spifi->clk_reg = devm_clk_get_enabled(&pdev->dev, "reg");
+	if (IS_ERR(spifi->clk_reg)) {
+		dev_err(&pdev->dev, "reg clock not found or unable to enable\n");
+		return PTR_ERR(spifi->clk_reg);
+	}
+
+	spifi->dev = &pdev->dev;
+	platform_set_drvdata(pdev, spifi);
+
+	/* Initialize and reset device */
+	nxp_spifi_reset(spifi);
+	writel(0, spifi->io_base + SPIFI_IDATA);
+	writel(0, spifi->io_base + SPIFI_MCMD);
+	nxp_spifi_reset(spifi);
+
+	flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
+	if (!flash_np) {
+		dev_err(&pdev->dev, "no SPI flash device to configure\n");
+		return -ENODEV;
+	}
+
+	ret = nxp_spifi_setup_flash(spifi, flash_np);
+	of_node_put(flash_np);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to setup flash chip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int nxp_spifi_remove(struct platform_device *pdev)
+{
+	struct nxp_spifi *spifi = platform_get_drvdata(pdev);
+
+	mtd_device_unregister(&spifi->nor.mtd);
+
+	return 0;
+}
+
+static const struct of_device_id nxp_spifi_match[] = {
+	{.compatible = "nxp,lpc1773-spifi"},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, nxp_spifi_match);
+
+static struct platform_driver nxp_spifi_driver = {
+	.probe	= nxp_spifi_probe,
+	.remove	= nxp_spifi_remove,
+	.driver	= {
+		.name = "nxp-spifi",
+		.of_match_table = nxp_spifi_match,
+	},
+};
+module_platform_driver(nxp_spifi_driver);
+
+MODULE_DESCRIPTION("NXP SPI Flash Interface driver");
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
new file mode 100644
index 0000000000..1b0c6770c1
--- /dev/null
+++ b/drivers/mtd/spi-nor/core.c
@@ -0,0 +1,3813 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with
+ * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c
+ *
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/sched/task_stack.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/spi/flash.h>
+
+#include "core.h"
+
+/* Define max times to check status register before we give up. */
+
+/*
+ * For everything but full-chip erase; probably could be much smaller, but kept
+ * around for safety for now
+ */
+#define DEFAULT_READY_WAIT_JIFFIES		(40UL * HZ)
+
+/*
+ * For full-chip erase, calibrated to a 2MB flash (M25P16); should be scaled up
+ * for larger flash
+ */
+#define CHIP_ERASE_2MB_READY_WAIT_JIFFIES	(40UL * HZ)
+
+#define SPI_NOR_MAX_ADDR_NBYTES	4
+
+#define SPI_NOR_SRST_SLEEP_MIN 200
+#define SPI_NOR_SRST_SLEEP_MAX 400
+
+/**
+ * spi_nor_get_cmd_ext() - Get the command opcode extension based on the
+ *			   extension type.
+ * @nor:		pointer to a 'struct spi_nor'
+ * @op:			pointer to the 'struct spi_mem_op' whose properties
+ *			need to be initialized.
+ *
+ * Right now, only "repeat" and "invert" are supported.
+ *
+ * Return: The opcode extension.
+ */
+static u8 spi_nor_get_cmd_ext(const struct spi_nor *nor,
+			      const struct spi_mem_op *op)
+{
+	switch (nor->cmd_ext_type) {
+	case SPI_NOR_EXT_INVERT:
+		return ~op->cmd.opcode;
+
+	case SPI_NOR_EXT_REPEAT:
+		return op->cmd.opcode;
+
+	default:
+		dev_err(nor->dev, "Unknown command extension type\n");
+		return 0;
+	}
+}
+
+/**
+ * spi_nor_spimem_setup_op() - Set up common properties of a spi-mem op.
+ * @nor:		pointer to a 'struct spi_nor'
+ * @op:			pointer to the 'struct spi_mem_op' whose properties
+ *			need to be initialized.
+ * @proto:		the protocol from which the properties need to be set.
+ */
+void spi_nor_spimem_setup_op(const struct spi_nor *nor,
+			     struct spi_mem_op *op,
+			     const enum spi_nor_protocol proto)
+{
+	u8 ext;
+
+	op->cmd.buswidth = spi_nor_get_protocol_inst_nbits(proto);
+
+	if (op->addr.nbytes)
+		op->addr.buswidth = spi_nor_get_protocol_addr_nbits(proto);
+
+	if (op->dummy.nbytes)
+		op->dummy.buswidth = spi_nor_get_protocol_addr_nbits(proto);
+
+	if (op->data.nbytes)
+		op->data.buswidth = spi_nor_get_protocol_data_nbits(proto);
+
+	if (spi_nor_protocol_is_dtr(proto)) {
+		/*
+		 * SPIMEM supports mixed DTR modes, but right now we can only
+		 * have all phases either DTR or STR. IOW, SPIMEM can have
+		 * something like 4S-4D-4D, but SPI NOR can't. So, set all 4
+		 * phases to either DTR or STR.
+		 */
+		op->cmd.dtr = true;
+		op->addr.dtr = true;
+		op->dummy.dtr = true;
+		op->data.dtr = true;
+
+		/* 2 bytes per clock cycle in DTR mode. */
+		op->dummy.nbytes *= 2;
+
+		ext = spi_nor_get_cmd_ext(nor, op);
+		op->cmd.opcode = (op->cmd.opcode << 8) | ext;
+		op->cmd.nbytes = 2;
+	}
+}
+
+/**
+ * spi_nor_spimem_bounce() - check if a bounce buffer is needed for the data
+ *                           transfer
+ * @nor:        pointer to 'struct spi_nor'
+ * @op:         pointer to 'struct spi_mem_op' template for transfer
+ *
+ * If we have to use the bounce buffer, the data field in @op will be updated.
+ *
+ * Return: true if the bounce buffer is needed, false if not
+ */
+static bool spi_nor_spimem_bounce(struct spi_nor *nor, struct spi_mem_op *op)
+{
+	/* op->data.buf.in occupies the same memory as op->data.buf.out */
+	if (object_is_on_stack(op->data.buf.in) ||
+	    !virt_addr_valid(op->data.buf.in)) {
+		if (op->data.nbytes > nor->bouncebuf_size)
+			op->data.nbytes = nor->bouncebuf_size;
+		op->data.buf.in = nor->bouncebuf;
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ * spi_nor_spimem_exec_op() - execute a memory operation
+ * @nor:        pointer to 'struct spi_nor'
+ * @op:         pointer to 'struct spi_mem_op' template for transfer
+ *
+ * Return: 0 on success, -error otherwise.
+ */
+static int spi_nor_spimem_exec_op(struct spi_nor *nor, struct spi_mem_op *op)
+{
+	int error;
+
+	error = spi_mem_adjust_op_size(nor->spimem, op);
+	if (error)
+		return error;
+
+	return spi_mem_exec_op(nor->spimem, op);
+}
+
+int spi_nor_controller_ops_read_reg(struct spi_nor *nor, u8 opcode,
+				    u8 *buf, size_t len)
+{
+	if (spi_nor_protocol_is_dtr(nor->reg_proto))
+		return -EOPNOTSUPP;
+
+	return nor->controller_ops->read_reg(nor, opcode, buf, len);
+}
+
+int spi_nor_controller_ops_write_reg(struct spi_nor *nor, u8 opcode,
+				     const u8 *buf, size_t len)
+{
+	if (spi_nor_protocol_is_dtr(nor->reg_proto))
+		return -EOPNOTSUPP;
+
+	return nor->controller_ops->write_reg(nor, opcode, buf, len);
+}
+
+static int spi_nor_controller_ops_erase(struct spi_nor *nor, loff_t offs)
+{
+	if (spi_nor_protocol_is_dtr(nor->reg_proto))
+		return -EOPNOTSUPP;
+
+	return nor->controller_ops->erase(nor, offs);
+}
+
+/**
+ * spi_nor_spimem_read_data() - read data from flash's memory region via
+ *                              spi-mem
+ * @nor:        pointer to 'struct spi_nor'
+ * @from:       offset to read from
+ * @len:        number of bytes to read
+ * @buf:        pointer to dst buffer
+ *
+ * Return: number of bytes read successfully, -errno otherwise
+ */
+static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from,
+					size_t len, u8 *buf)
+{
+	struct spi_mem_op op =
+		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
+			   SPI_MEM_OP_ADDR(nor->addr_nbytes, from, 0),
+			   SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
+			   SPI_MEM_OP_DATA_IN(len, buf, 0));
+	bool usebouncebuf;
+	ssize_t nbytes;
+	int error;
+
+	spi_nor_spimem_setup_op(nor, &op, nor->read_proto);
+
+	/* convert the dummy cycles to the number of bytes */
+	op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
+	if (spi_nor_protocol_is_dtr(nor->read_proto))
+		op.dummy.nbytes *= 2;
+
+	usebouncebuf = spi_nor_spimem_bounce(nor, &op);
+
+	if (nor->dirmap.rdesc) {
+		nbytes = spi_mem_dirmap_read(nor->dirmap.rdesc, op.addr.val,
+					     op.data.nbytes, op.data.buf.in);
+	} else {
+		error = spi_nor_spimem_exec_op(nor, &op);
+		if (error)
+			return error;
+		nbytes = op.data.nbytes;
+	}
+
+	if (usebouncebuf && nbytes > 0)
+		memcpy(buf, op.data.buf.in, nbytes);
+
+	return nbytes;
+}
+
+/**
+ * spi_nor_read_data() - read data from flash memory
+ * @nor:        pointer to 'struct spi_nor'
+ * @from:       offset to read from
+ * @len:        number of bytes to read
+ * @buf:        pointer to dst buffer
+ *
+ * Return: number of bytes read successfully, -errno otherwise
+ */
+ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, u8 *buf)
+{
+	if (nor->spimem)
+		return spi_nor_spimem_read_data(nor, from, len, buf);
+
+	return nor->controller_ops->read(nor, from, len, buf);
+}
+
+/**
+ * spi_nor_spimem_write_data() - write data to flash memory via
+ *                               spi-mem
+ * @nor:        pointer to 'struct spi_nor'
+ * @to:         offset to write to
+ * @len:        number of bytes to write
+ * @buf:        pointer to src buffer
+ *
+ * Return: number of bytes written successfully, -errno otherwise
+ */
+static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to,
+					 size_t len, const u8 *buf)
+{
+	struct spi_mem_op op =
+		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 0),
+			   SPI_MEM_OP_ADDR(nor->addr_nbytes, to, 0),
+			   SPI_MEM_OP_NO_DUMMY,
+			   SPI_MEM_OP_DATA_OUT(len, buf, 0));
+	ssize_t nbytes;
+	int error;
+
+	if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
+		op.addr.nbytes = 0;
+
+	spi_nor_spimem_setup_op(nor, &op, nor->write_proto);
+
+	if (spi_nor_spimem_bounce(nor, &op))
+		memcpy(nor->bouncebuf, buf, op.data.nbytes);
+
+	if (nor->dirmap.wdesc) {
+		nbytes = spi_mem_dirmap_write(nor->dirmap.wdesc, op.addr.val,
+					      op.data.nbytes, op.data.buf.out);
+	} else {
+		error = spi_nor_spimem_exec_op(nor, &op);
+		if (error)
+			return error;
+		nbytes = op.data.nbytes;
+	}
+
+	return nbytes;
+}
+
+/**
+ * spi_nor_write_data() - write data to flash memory
+ * @nor:        pointer to 'struct spi_nor'
+ * @to:         offset to write to
+ * @len:        number of bytes to write
+ * @buf:        pointer to src buffer
+ *
+ * Return: number of bytes written successfully, -errno otherwise
+ */
+ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
+			   const u8 *buf)
+{
+	if (nor->spimem)
+		return spi_nor_spimem_write_data(nor, to, len, buf);
+
+	return nor->controller_ops->write(nor, to, len, buf);
+}
+
+/**
+ * spi_nor_read_any_reg() - read any register from flash memory, nonvolatile or
+ * volatile.
+ * @nor:        pointer to 'struct spi_nor'.
+ * @op:		SPI memory operation. op->data.buf must be DMA-able.
+ * @proto:	SPI protocol to use for the register operation.
+ *
+ * Return: zero on success, -errno otherwise
+ */
+int spi_nor_read_any_reg(struct spi_nor *nor, struct spi_mem_op *op,
+			 enum spi_nor_protocol proto)
+{
+	if (!nor->spimem)
+		return -EOPNOTSUPP;
+
+	spi_nor_spimem_setup_op(nor, op, proto);
+	return spi_nor_spimem_exec_op(nor, op);
+}
+
+/**
+ * spi_nor_write_any_volatile_reg() - write any volatile register to flash
+ * memory.
+ * @nor:        pointer to 'struct spi_nor'
+ * @op:		SPI memory operation. op->data.buf must be DMA-able.
+ * @proto:	SPI protocol to use for the register operation.
+ *
+ * Writing volatile registers are instant according to some manufacturers
+ * (Cypress, Micron) and do not need any status polling.
+ *
+ * Return: zero on success, -errno otherwise
+ */
+int spi_nor_write_any_volatile_reg(struct spi_nor *nor, struct spi_mem_op *op,
+				   enum spi_nor_protocol proto)
+{
+	int ret;
+
+	if (!nor->spimem)
+		return -EOPNOTSUPP;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+	spi_nor_spimem_setup_op(nor, op, proto);
+	return spi_nor_spimem_exec_op(nor, op);
+}
+
+/**
+ * spi_nor_write_enable() - Set write enable latch with Write Enable command.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_enable(struct spi_nor *nor)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPI_NOR_WREN_OP;
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_WREN,
+						       NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d on Write Enable\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_write_disable() - Send Write Disable instruction to the chip.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_disable(struct spi_nor *nor)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPI_NOR_WRDI_OP;
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_WRDI,
+						       NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d on Write Disable\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_read_id() - Read the JEDEC ID.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @naddr:	number of address bytes to send. Can be zero if the operation
+ *		does not need to send an address.
+ * @ndummy:	number of dummy bytes to send after an opcode or address. Can
+ *		be zero if the operation does not require dummy bytes.
+ * @id:		pointer to a DMA-able buffer where the value of the JEDEC ID
+ *		will be written.
+ * @proto:	the SPI protocol for register operation.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_read_id(struct spi_nor *nor, u8 naddr, u8 ndummy, u8 *id,
+		    enum spi_nor_protocol proto)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_NOR_READID_OP(naddr, ndummy, id, SPI_NOR_MAX_ID_LEN);
+
+		spi_nor_spimem_setup_op(nor, &op, proto);
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDID, id,
+						    SPI_NOR_MAX_ID_LEN);
+	}
+	return ret;
+}
+
+/**
+ * spi_nor_read_sr() - Read the Status Register.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @sr:		pointer to a DMA-able buffer where the value of the
+ *              Status Register will be written. Should be at least 2 bytes.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_read_sr(struct spi_nor *nor, u8 *sr)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPI_NOR_RDSR_OP(sr);
+
+		if (nor->reg_proto == SNOR_PROTO_8_8_8_DTR) {
+			op.addr.nbytes = nor->params->rdsr_addr_nbytes;
+			op.dummy.nbytes = nor->params->rdsr_dummy;
+			/*
+			 * We don't want to read only one byte in DTR mode. So,
+			 * read 2 and then discard the second byte.
+			 */
+			op.data.nbytes = 2;
+		}
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_RDSR, sr,
+						      1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d reading SR\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_read_cr() - Read the Configuration Register using the
+ * SPINOR_OP_RDCR (35h) command.
+ * @nor:	pointer to 'struct spi_nor'
+ * @cr:		pointer to a DMA-able buffer where the value of the
+ *              Configuration Register will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_read_cr(struct spi_nor *nor, u8 *cr)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPI_NOR_RDCR_OP(cr);
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_RDCR, cr,
+						      1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d reading CR\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_set_4byte_addr_mode_en4b_ex4b() - Enter/Exit 4-byte address mode
+ *			using SPINOR_OP_EN4B/SPINOR_OP_EX4B. Typically used by
+ *			Winbond and Macronix.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
+ *		address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_set_4byte_addr_mode_en4b_ex4b(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPI_NOR_EN4B_EX4B_OP(enable);
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor,
+						       enable ? SPINOR_OP_EN4B :
+								SPINOR_OP_EX4B,
+						       NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_set_4byte_addr_mode_wren_en4b_ex4b() - Set 4-byte address mode using
+ * SPINOR_OP_WREN followed by SPINOR_OP_EN4B or SPINOR_OP_EX4B. Typically used
+ * by ST and Micron flashes.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
+ *		address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_set_4byte_addr_mode_wren_en4b_ex4b(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_set_4byte_addr_mode_en4b_ex4b(nor, enable);
+	if (ret)
+		return ret;
+
+	return spi_nor_write_disable(nor);
+}
+
+/**
+ * spi_nor_set_4byte_addr_mode_brwr() - Set 4-byte address mode using
+ *			SPINOR_OP_BRWR. Typically used by Spansion flashes.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
+ *		address mode.
+ *
+ * 8-bit volatile bank register used to define A[30:A24] bits. MSB (bit[7]) is
+ * used to enable/disable 4-byte address mode. When MSB is set to ‘1’, 4-byte
+ * address mode is active and A[30:24] bits are don’t care. Write instruction is
+ * SPINOR_OP_BRWR(17h) with 1 byte of data.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_set_4byte_addr_mode_brwr(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	nor->bouncebuf[0] = enable << 7;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPI_NOR_BRWR_OP(nor->bouncebuf);
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_BRWR,
+						       nor->bouncebuf, 1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_sr_ready() - Query the Status Register to see if the flash is ready
+ * for new commands.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
+ */
+int spi_nor_sr_ready(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	return !(nor->bouncebuf[0] & SR_WIP);
+}
+
+/**
+ * spi_nor_use_parallel_locking() - Checks if RWW locking scheme shall be used
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: true if parallel locking is enabled, false otherwise.
+ */
+static bool spi_nor_use_parallel_locking(struct spi_nor *nor)
+{
+	return nor->flags & SNOR_F_RWW;
+}
+
+/* Locking helpers for status read operations */
+static int spi_nor_rww_start_rdst(struct spi_nor *nor)
+{
+	struct spi_nor_rww *rww = &nor->rww;
+	int ret = -EAGAIN;
+
+	mutex_lock(&nor->lock);
+
+	if (rww->ongoing_io || rww->ongoing_rd)
+		goto busy;
+
+	rww->ongoing_io = true;
+	rww->ongoing_rd = true;
+	ret = 0;
+
+busy:
+	mutex_unlock(&nor->lock);
+	return ret;
+}
+
+static void spi_nor_rww_end_rdst(struct spi_nor *nor)
+{
+	struct spi_nor_rww *rww = &nor->rww;
+
+	mutex_lock(&nor->lock);
+
+	rww->ongoing_io = false;
+	rww->ongoing_rd = false;
+
+	mutex_unlock(&nor->lock);
+}
+
+static int spi_nor_lock_rdst(struct spi_nor *nor)
+{
+	if (spi_nor_use_parallel_locking(nor))
+		return spi_nor_rww_start_rdst(nor);
+
+	return 0;
+}
+
+static void spi_nor_unlock_rdst(struct spi_nor *nor)
+{
+	if (spi_nor_use_parallel_locking(nor)) {
+		spi_nor_rww_end_rdst(nor);
+		wake_up(&nor->rww.wait);
+	}
+}
+
+/**
+ * spi_nor_ready() - Query the flash to see if it is ready for new commands.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
+ */
+static int spi_nor_ready(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = spi_nor_lock_rdst(nor);
+	if (ret)
+		return 0;
+
+	/* Flashes might override the standard routine. */
+	if (nor->params->ready)
+		ret = nor->params->ready(nor);
+	else
+		ret = spi_nor_sr_ready(nor);
+
+	spi_nor_unlock_rdst(nor);
+
+	return ret;
+}
+
+/**
+ * spi_nor_wait_till_ready_with_timeout() - Service routine to read the
+ * Status Register until ready, or timeout occurs.
+ * @nor:		pointer to "struct spi_nor".
+ * @timeout_jiffies:	jiffies to wait until timeout.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor,
+						unsigned long timeout_jiffies)
+{
+	unsigned long deadline;
+	int timeout = 0, ret;
+
+	deadline = jiffies + timeout_jiffies;
+
+	while (!timeout) {
+		if (time_after_eq(jiffies, deadline))
+			timeout = 1;
+
+		ret = spi_nor_ready(nor);
+		if (ret < 0)
+			return ret;
+		if (ret)
+			return 0;
+
+		cond_resched();
+	}
+
+	dev_dbg(nor->dev, "flash operation timed out\n");
+
+	return -ETIMEDOUT;
+}
+
+/**
+ * spi_nor_wait_till_ready() - Wait for a predefined amount of time for the
+ * flash to be ready, or timeout occurs.
+ * @nor:	pointer to "struct spi_nor".
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_wait_till_ready(struct spi_nor *nor)
+{
+	return spi_nor_wait_till_ready_with_timeout(nor,
+						    DEFAULT_READY_WAIT_JIFFIES);
+}
+
+/**
+ * spi_nor_global_block_unlock() - Unlock Global Block Protection.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_global_block_unlock(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPI_NOR_GBULK_OP;
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_GBULK,
+						       NULL, 0);
+	}
+
+	if (ret) {
+		dev_dbg(nor->dev, "error %d on Global Block Unlock\n", ret);
+		return ret;
+	}
+
+	return spi_nor_wait_till_ready(nor);
+}
+
+/**
+ * spi_nor_write_sr() - Write the Status Register.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @sr:		pointer to DMA-able buffer to write to the Status Register.
+ * @len:	number of bytes to write to the Status Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len)
+{
+	int ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPI_NOR_WRSR_OP(sr, len);
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_WRSR, sr,
+						       len);
+	}
+
+	if (ret) {
+		dev_dbg(nor->dev, "error %d writing SR\n", ret);
+		return ret;
+	}
+
+	return spi_nor_wait_till_ready(nor);
+}
+
+/**
+ * spi_nor_write_sr1_and_check() - Write one byte to the Status Register 1 and
+ * ensure that the byte written match the received value.
+ * @nor:	pointer to a 'struct spi_nor'.
+ * @sr1:	byte value to be written to the Status Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr1_and_check(struct spi_nor *nor, u8 sr1)
+{
+	int ret;
+
+	nor->bouncebuf[0] = sr1;
+
+	ret = spi_nor_write_sr(nor, nor->bouncebuf, 1);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] != sr1) {
+		dev_dbg(nor->dev, "SR1: read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * spi_nor_write_16bit_sr_and_check() - Write the Status Register 1 and the
+ * Status Register 2 in one shot. Ensure that the byte written in the Status
+ * Register 1 match the received value, and that the 16-bit Write did not
+ * affect what was already in the Status Register 2.
+ * @nor:	pointer to a 'struct spi_nor'.
+ * @sr1:	byte value to be written to the Status Register 1.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
+{
+	int ret;
+	u8 *sr_cr = nor->bouncebuf;
+	u8 cr_written;
+
+	/* Make sure we don't overwrite the contents of Status Register 2. */
+	if (!(nor->flags & SNOR_F_NO_READ_CR)) {
+		ret = spi_nor_read_cr(nor, &sr_cr[1]);
+		if (ret)
+			return ret;
+	} else if (spi_nor_get_protocol_width(nor->read_proto) == 4 &&
+		   spi_nor_get_protocol_width(nor->write_proto) == 4 &&
+		   nor->params->quad_enable) {
+		/*
+		 * If the Status Register 2 Read command (35h) is not
+		 * supported, we should at least be sure we don't
+		 * change the value of the SR2 Quad Enable bit.
+		 *
+		 * When the Quad Enable method is set and the buswidth is 4, we
+		 * can safely assume that the value of the QE bit is one, as a
+		 * consequence of the nor->params->quad_enable() call.
+		 *
+		 * According to the JESD216 revB standard, BFPT DWORDS[15],
+		 * bits 22:20, the 16-bit Write Status (01h) command is
+		 * available just for the cases in which the QE bit is
+		 * described in SR2 at BIT(1).
+		 */
+		sr_cr[1] = SR2_QUAD_EN_BIT1;
+	} else {
+		sr_cr[1] = 0;
+	}
+
+	sr_cr[0] = sr1;
+
+	ret = spi_nor_write_sr(nor, sr_cr, 2);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_read_sr(nor, sr_cr);
+	if (ret)
+		return ret;
+
+	if (sr1 != sr_cr[0]) {
+		dev_dbg(nor->dev, "SR: Read back test failed\n");
+		return -EIO;
+	}
+
+	if (nor->flags & SNOR_F_NO_READ_CR)
+		return 0;
+
+	cr_written = sr_cr[1];
+
+	ret = spi_nor_read_cr(nor, &sr_cr[1]);
+	if (ret)
+		return ret;
+
+	if (cr_written != sr_cr[1]) {
+		dev_dbg(nor->dev, "CR: read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * spi_nor_write_16bit_cr_and_check() - Write the Status Register 1 and the
+ * Configuration Register in one shot. Ensure that the byte written in the
+ * Configuration Register match the received value, and that the 16-bit Write
+ * did not affect what was already in the Status Register 1.
+ * @nor:	pointer to a 'struct spi_nor'.
+ * @cr:		byte value to be written to the Configuration Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr)
+{
+	int ret;
+	u8 *sr_cr = nor->bouncebuf;
+	u8 sr_written;
+
+	/* Keep the current value of the Status Register 1. */
+	ret = spi_nor_read_sr(nor, sr_cr);
+	if (ret)
+		return ret;
+
+	sr_cr[1] = cr;
+
+	ret = spi_nor_write_sr(nor, sr_cr, 2);
+	if (ret)
+		return ret;
+
+	sr_written = sr_cr[0];
+
+	ret = spi_nor_read_sr(nor, sr_cr);
+	if (ret)
+		return ret;
+
+	if (sr_written != sr_cr[0]) {
+		dev_dbg(nor->dev, "SR: Read back test failed\n");
+		return -EIO;
+	}
+
+	if (nor->flags & SNOR_F_NO_READ_CR)
+		return 0;
+
+	ret = spi_nor_read_cr(nor, &sr_cr[1]);
+	if (ret)
+		return ret;
+
+	if (cr != sr_cr[1]) {
+		dev_dbg(nor->dev, "CR: read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * spi_nor_write_sr_and_check() - Write the Status Register 1 and ensure that
+ * the byte written match the received value without affecting other bits in the
+ * Status Register 1 and 2.
+ * @nor:	pointer to a 'struct spi_nor'.
+ * @sr1:	byte value to be written to the Status Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1)
+{
+	if (nor->flags & SNOR_F_HAS_16BIT_SR)
+		return spi_nor_write_16bit_sr_and_check(nor, sr1);
+
+	return spi_nor_write_sr1_and_check(nor, sr1);
+}
+
+/**
+ * spi_nor_write_sr2() - Write the Status Register 2 using the
+ * SPINOR_OP_WRSR2 (3eh) command.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @sr2:	pointer to DMA-able buffer to write to the Status Register 2.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr2(struct spi_nor *nor, const u8 *sr2)
+{
+	int ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPI_NOR_WRSR2_OP(sr2);
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_WRSR2,
+						       sr2, 1);
+	}
+
+	if (ret) {
+		dev_dbg(nor->dev, "error %d writing SR2\n", ret);
+		return ret;
+	}
+
+	return spi_nor_wait_till_ready(nor);
+}
+
+/**
+ * spi_nor_read_sr2() - Read the Status Register 2 using the
+ * SPINOR_OP_RDSR2 (3fh) command.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @sr2:	pointer to DMA-able buffer where the value of the
+ *		Status Register 2 will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPI_NOR_RDSR2_OP(sr2);
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_RDSR2, sr2,
+						      1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d reading SR2\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_erase_chip() - Erase the entire flash memory.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_erase_chip(struct spi_nor *nor)
+{
+	int ret;
+
+	dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10));
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPI_NOR_CHIP_ERASE_OP;
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor,
+						       SPINOR_OP_CHIP_ERASE,
+						       NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d erasing chip\n", ret);
+
+	return ret;
+}
+
+static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size)
+{
+	size_t i;
+
+	for (i = 0; i < size; i++)
+		if (table[i][0] == opcode)
+			return table[i][1];
+
+	/* No conversion found, keep input op code. */
+	return opcode;
+}
+
+u8 spi_nor_convert_3to4_read(u8 opcode)
+{
+	static const u8 spi_nor_3to4_read[][2] = {
+		{ SPINOR_OP_READ,	SPINOR_OP_READ_4B },
+		{ SPINOR_OP_READ_FAST,	SPINOR_OP_READ_FAST_4B },
+		{ SPINOR_OP_READ_1_1_2,	SPINOR_OP_READ_1_1_2_4B },
+		{ SPINOR_OP_READ_1_2_2,	SPINOR_OP_READ_1_2_2_4B },
+		{ SPINOR_OP_READ_1_1_4,	SPINOR_OP_READ_1_1_4_4B },
+		{ SPINOR_OP_READ_1_4_4,	SPINOR_OP_READ_1_4_4_4B },
+		{ SPINOR_OP_READ_1_1_8,	SPINOR_OP_READ_1_1_8_4B },
+		{ SPINOR_OP_READ_1_8_8,	SPINOR_OP_READ_1_8_8_4B },
+
+		{ SPINOR_OP_READ_1_1_1_DTR,	SPINOR_OP_READ_1_1_1_DTR_4B },
+		{ SPINOR_OP_READ_1_2_2_DTR,	SPINOR_OP_READ_1_2_2_DTR_4B },
+		{ SPINOR_OP_READ_1_4_4_DTR,	SPINOR_OP_READ_1_4_4_DTR_4B },
+	};
+
+	return spi_nor_convert_opcode(opcode, spi_nor_3to4_read,
+				      ARRAY_SIZE(spi_nor_3to4_read));
+}
+
+static u8 spi_nor_convert_3to4_program(u8 opcode)
+{
+	static const u8 spi_nor_3to4_program[][2] = {
+		{ SPINOR_OP_PP,		SPINOR_OP_PP_4B },
+		{ SPINOR_OP_PP_1_1_4,	SPINOR_OP_PP_1_1_4_4B },
+		{ SPINOR_OP_PP_1_4_4,	SPINOR_OP_PP_1_4_4_4B },
+		{ SPINOR_OP_PP_1_1_8,	SPINOR_OP_PP_1_1_8_4B },
+		{ SPINOR_OP_PP_1_8_8,	SPINOR_OP_PP_1_8_8_4B },
+	};
+
+	return spi_nor_convert_opcode(opcode, spi_nor_3to4_program,
+				      ARRAY_SIZE(spi_nor_3to4_program));
+}
+
+static u8 spi_nor_convert_3to4_erase(u8 opcode)
+{
+	static const u8 spi_nor_3to4_erase[][2] = {
+		{ SPINOR_OP_BE_4K,	SPINOR_OP_BE_4K_4B },
+		{ SPINOR_OP_BE_32K,	SPINOR_OP_BE_32K_4B },
+		{ SPINOR_OP_SE,		SPINOR_OP_SE_4B },
+	};
+
+	return spi_nor_convert_opcode(opcode, spi_nor_3to4_erase,
+				      ARRAY_SIZE(spi_nor_3to4_erase));
+}
+
+static bool spi_nor_has_uniform_erase(const struct spi_nor *nor)
+{
+	return !!nor->params->erase_map.uniform_erase_type;
+}
+
+static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
+{
+	nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
+	nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode);
+	nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
+
+	if (!spi_nor_has_uniform_erase(nor)) {
+		struct spi_nor_erase_map *map = &nor->params->erase_map;
+		struct spi_nor_erase_type *erase;
+		int i;
+
+		for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+			erase = &map->erase_type[i];
+			erase->opcode =
+				spi_nor_convert_3to4_erase(erase->opcode);
+		}
+	}
+}
+
+static int spi_nor_prep(struct spi_nor *nor)
+{
+	int ret = 0;
+
+	if (nor->controller_ops && nor->controller_ops->prepare)
+		ret = nor->controller_ops->prepare(nor);
+
+	return ret;
+}
+
+static void spi_nor_unprep(struct spi_nor *nor)
+{
+	if (nor->controller_ops && nor->controller_ops->unprepare)
+		nor->controller_ops->unprepare(nor);
+}
+
+static void spi_nor_offset_to_banks(u64 bank_size, loff_t start, size_t len,
+				    u8 *first, u8 *last)
+{
+	/* This is currently safe, the number of banks being very small */
+	*first = DIV_ROUND_DOWN_ULL(start, bank_size);
+	*last = DIV_ROUND_DOWN_ULL(start + len - 1, bank_size);
+}
+
+/* Generic helpers for internal locking and serialization */
+static bool spi_nor_rww_start_io(struct spi_nor *nor)
+{
+	struct spi_nor_rww *rww = &nor->rww;
+	bool start = false;
+
+	mutex_lock(&nor->lock);
+
+	if (rww->ongoing_io)
+		goto busy;
+
+	rww->ongoing_io = true;
+	start = true;
+
+busy:
+	mutex_unlock(&nor->lock);
+	return start;
+}
+
+static void spi_nor_rww_end_io(struct spi_nor *nor)
+{
+	mutex_lock(&nor->lock);
+	nor->rww.ongoing_io = false;
+	mutex_unlock(&nor->lock);
+}
+
+static int spi_nor_lock_device(struct spi_nor *nor)
+{
+	if (!spi_nor_use_parallel_locking(nor))
+		return 0;
+
+	return wait_event_killable(nor->rww.wait, spi_nor_rww_start_io(nor));
+}
+
+static void spi_nor_unlock_device(struct spi_nor *nor)
+{
+	if (spi_nor_use_parallel_locking(nor)) {
+		spi_nor_rww_end_io(nor);
+		wake_up(&nor->rww.wait);
+	}
+}
+
+/* Generic helpers for internal locking and serialization */
+static bool spi_nor_rww_start_exclusive(struct spi_nor *nor)
+{
+	struct spi_nor_rww *rww = &nor->rww;
+	bool start = false;
+
+	mutex_lock(&nor->lock);
+
+	if (rww->ongoing_io || rww->ongoing_rd || rww->ongoing_pe)
+		goto busy;
+
+	rww->ongoing_io = true;
+	rww->ongoing_rd = true;
+	rww->ongoing_pe = true;
+	start = true;
+
+busy:
+	mutex_unlock(&nor->lock);
+	return start;
+}
+
+static void spi_nor_rww_end_exclusive(struct spi_nor *nor)
+{
+	struct spi_nor_rww *rww = &nor->rww;
+
+	mutex_lock(&nor->lock);
+	rww->ongoing_io = false;
+	rww->ongoing_rd = false;
+	rww->ongoing_pe = false;
+	mutex_unlock(&nor->lock);
+}
+
+int spi_nor_prep_and_lock(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = spi_nor_prep(nor);
+	if (ret)
+		return ret;
+
+	if (!spi_nor_use_parallel_locking(nor))
+		mutex_lock(&nor->lock);
+	else
+		ret = wait_event_killable(nor->rww.wait,
+					  spi_nor_rww_start_exclusive(nor));
+
+	return ret;
+}
+
+void spi_nor_unlock_and_unprep(struct spi_nor *nor)
+{
+	if (!spi_nor_use_parallel_locking(nor)) {
+		mutex_unlock(&nor->lock);
+	} else {
+		spi_nor_rww_end_exclusive(nor);
+		wake_up(&nor->rww.wait);
+	}
+
+	spi_nor_unprep(nor);
+}
+
+/* Internal locking helpers for program and erase operations */
+static bool spi_nor_rww_start_pe(struct spi_nor *nor, loff_t start, size_t len)
+{
+	struct spi_nor_rww *rww = &nor->rww;
+	unsigned int used_banks = 0;
+	bool started = false;
+	u8 first, last;
+	int bank;
+
+	mutex_lock(&nor->lock);
+
+	if (rww->ongoing_io || rww->ongoing_rd || rww->ongoing_pe)
+		goto busy;
+
+	spi_nor_offset_to_banks(nor->params->bank_size, start, len, &first, &last);
+	for (bank = first; bank <= last; bank++) {
+		if (rww->used_banks & BIT(bank))
+			goto busy;
+
+		used_banks |= BIT(bank);
+	}
+
+	rww->used_banks |= used_banks;
+	rww->ongoing_pe = true;
+	started = true;
+
+busy:
+	mutex_unlock(&nor->lock);
+	return started;
+}
+
+static void spi_nor_rww_end_pe(struct spi_nor *nor, loff_t start, size_t len)
+{
+	struct spi_nor_rww *rww = &nor->rww;
+	u8 first, last;
+	int bank;
+
+	mutex_lock(&nor->lock);
+
+	spi_nor_offset_to_banks(nor->params->bank_size, start, len, &first, &last);
+	for (bank = first; bank <= last; bank++)
+		rww->used_banks &= ~BIT(bank);
+
+	rww->ongoing_pe = false;
+
+	mutex_unlock(&nor->lock);
+}
+
+static int spi_nor_prep_and_lock_pe(struct spi_nor *nor, loff_t start, size_t len)
+{
+	int ret;
+
+	ret = spi_nor_prep(nor);
+	if (ret)
+		return ret;
+
+	if (!spi_nor_use_parallel_locking(nor))
+		mutex_lock(&nor->lock);
+	else
+		ret = wait_event_killable(nor->rww.wait,
+					  spi_nor_rww_start_pe(nor, start, len));
+
+	return ret;
+}
+
+static void spi_nor_unlock_and_unprep_pe(struct spi_nor *nor, loff_t start, size_t len)
+{
+	if (!spi_nor_use_parallel_locking(nor)) {
+		mutex_unlock(&nor->lock);
+	} else {
+		spi_nor_rww_end_pe(nor, start, len);
+		wake_up(&nor->rww.wait);
+	}
+
+	spi_nor_unprep(nor);
+}
+
+/* Internal locking helpers for read operations */
+static bool spi_nor_rww_start_rd(struct spi_nor *nor, loff_t start, size_t len)
+{
+	struct spi_nor_rww *rww = &nor->rww;
+	unsigned int used_banks = 0;
+	bool started = false;
+	u8 first, last;
+	int bank;
+
+	mutex_lock(&nor->lock);
+
+	if (rww->ongoing_io || rww->ongoing_rd)
+		goto busy;
+
+	spi_nor_offset_to_banks(nor->params->bank_size, start, len, &first, &last);
+	for (bank = first; bank <= last; bank++) {
+		if (rww->used_banks & BIT(bank))
+			goto busy;
+
+		used_banks |= BIT(bank);
+	}
+
+	rww->used_banks |= used_banks;
+	rww->ongoing_io = true;
+	rww->ongoing_rd = true;
+	started = true;
+
+busy:
+	mutex_unlock(&nor->lock);
+	return started;
+}
+
+static void spi_nor_rww_end_rd(struct spi_nor *nor, loff_t start, size_t len)
+{
+	struct spi_nor_rww *rww = &nor->rww;
+	u8 first, last;
+	int bank;
+
+	mutex_lock(&nor->lock);
+
+	spi_nor_offset_to_banks(nor->params->bank_size, start, len, &first, &last);
+	for (bank = first; bank <= last; bank++)
+		nor->rww.used_banks &= ~BIT(bank);
+
+	rww->ongoing_io = false;
+	rww->ongoing_rd = false;
+
+	mutex_unlock(&nor->lock);
+}
+
+static int spi_nor_prep_and_lock_rd(struct spi_nor *nor, loff_t start, size_t len)
+{
+	int ret;
+
+	ret = spi_nor_prep(nor);
+	if (ret)
+		return ret;
+
+	if (!spi_nor_use_parallel_locking(nor))
+		mutex_lock(&nor->lock);
+	else
+		ret = wait_event_killable(nor->rww.wait,
+					  spi_nor_rww_start_rd(nor, start, len));
+
+	return ret;
+}
+
+static void spi_nor_unlock_and_unprep_rd(struct spi_nor *nor, loff_t start, size_t len)
+{
+	if (!spi_nor_use_parallel_locking(nor)) {
+		mutex_unlock(&nor->lock);
+	} else {
+		spi_nor_rww_end_rd(nor, start, len);
+		wake_up(&nor->rww.wait);
+	}
+
+	spi_nor_unprep(nor);
+}
+
+static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr)
+{
+	if (!nor->params->convert_addr)
+		return addr;
+
+	return nor->params->convert_addr(nor, addr);
+}
+
+/*
+ * Initiate the erasure of a single sector
+ */
+int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
+{
+	int i;
+
+	addr = spi_nor_convert_addr(nor, addr);
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_NOR_SECTOR_ERASE_OP(nor->erase_opcode,
+						nor->addr_nbytes, addr);
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		return spi_mem_exec_op(nor->spimem, &op);
+	} else if (nor->controller_ops->erase) {
+		return spi_nor_controller_ops_erase(nor, addr);
+	}
+
+	/*
+	 * Default implementation, if driver doesn't have a specialized HW
+	 * control
+	 */
+	for (i = nor->addr_nbytes - 1; i >= 0; i--) {
+		nor->bouncebuf[i] = addr & 0xff;
+		addr >>= 8;
+	}
+
+	return spi_nor_controller_ops_write_reg(nor, nor->erase_opcode,
+						nor->bouncebuf, nor->addr_nbytes);
+}
+
+/**
+ * spi_nor_div_by_erase_size() - calculate remainder and update new dividend
+ * @erase:	pointer to a structure that describes a SPI NOR erase type
+ * @dividend:	dividend value
+ * @remainder:	pointer to u32 remainder (will be updated)
+ *
+ * Return: the result of the division
+ */
+static u64 spi_nor_div_by_erase_size(const struct spi_nor_erase_type *erase,
+				     u64 dividend, u32 *remainder)
+{
+	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
+	*remainder = (u32)dividend & erase->size_mask;
+	return dividend >> erase->size_shift;
+}
+
+/**
+ * spi_nor_find_best_erase_type() - find the best erase type for the given
+ *				    offset in the serial flash memory and the
+ *				    number of bytes to erase. The region in
+ *				    which the address fits is expected to be
+ *				    provided.
+ * @map:	the erase map of the SPI NOR
+ * @region:	pointer to a structure that describes a SPI NOR erase region
+ * @addr:	offset in the serial flash memory
+ * @len:	number of bytes to erase
+ *
+ * Return: a pointer to the best fitted erase type, NULL otherwise.
+ */
+static const struct spi_nor_erase_type *
+spi_nor_find_best_erase_type(const struct spi_nor_erase_map *map,
+			     const struct spi_nor_erase_region *region,
+			     u64 addr, u32 len)
+{
+	const struct spi_nor_erase_type *erase;
+	u32 rem;
+	int i;
+	u8 erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
+
+	/*
+	 * Erase types are ordered by size, with the smallest erase type at
+	 * index 0.
+	 */
+	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+		/* Does the erase region support the tested erase type? */
+		if (!(erase_mask & BIT(i)))
+			continue;
+
+		erase = &map->erase_type[i];
+		if (!erase->size)
+			continue;
+
+		/* Alignment is not mandatory for overlaid regions */
+		if (region->offset & SNOR_OVERLAID_REGION &&
+		    region->size <= len)
+			return erase;
+
+		/* Don't erase more than what the user has asked for. */
+		if (erase->size > len)
+			continue;
+
+		spi_nor_div_by_erase_size(erase, addr, &rem);
+		if (!rem)
+			return erase;
+	}
+
+	return NULL;
+}
+
+static u64 spi_nor_region_is_last(const struct spi_nor_erase_region *region)
+{
+	return region->offset & SNOR_LAST_REGION;
+}
+
+static u64 spi_nor_region_end(const struct spi_nor_erase_region *region)
+{
+	return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size;
+}
+
+/**
+ * spi_nor_region_next() - get the next spi nor region
+ * @region:	pointer to a structure that describes a SPI NOR erase region
+ *
+ * Return: the next spi nor region or NULL if last region.
+ */
+struct spi_nor_erase_region *
+spi_nor_region_next(struct spi_nor_erase_region *region)
+{
+	if (spi_nor_region_is_last(region))
+		return NULL;
+	region++;
+	return region;
+}
+
+/**
+ * spi_nor_find_erase_region() - find the region of the serial flash memory in
+ *				 which the offset fits
+ * @map:	the erase map of the SPI NOR
+ * @addr:	offset in the serial flash memory
+ *
+ * Return: a pointer to the spi_nor_erase_region struct, ERR_PTR(-errno)
+ *	   otherwise.
+ */
+static struct spi_nor_erase_region *
+spi_nor_find_erase_region(const struct spi_nor_erase_map *map, u64 addr)
+{
+	struct spi_nor_erase_region *region = map->regions;
+	u64 region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
+	u64 region_end = region_start + region->size;
+
+	while (addr < region_start || addr >= region_end) {
+		region = spi_nor_region_next(region);
+		if (!region)
+			return ERR_PTR(-EINVAL);
+
+		region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
+		region_end = region_start + region->size;
+	}
+
+	return region;
+}
+
+/**
+ * spi_nor_init_erase_cmd() - initialize an erase command
+ * @region:	pointer to a structure that describes a SPI NOR erase region
+ * @erase:	pointer to a structure that describes a SPI NOR erase type
+ *
+ * Return: the pointer to the allocated erase command, ERR_PTR(-errno)
+ *	   otherwise.
+ */
+static struct spi_nor_erase_command *
+spi_nor_init_erase_cmd(const struct spi_nor_erase_region *region,
+		       const struct spi_nor_erase_type *erase)
+{
+	struct spi_nor_erase_command *cmd;
+
+	cmd = kmalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&cmd->list);
+	cmd->opcode = erase->opcode;
+	cmd->count = 1;
+
+	if (region->offset & SNOR_OVERLAID_REGION)
+		cmd->size = region->size;
+	else
+		cmd->size = erase->size;
+
+	return cmd;
+}
+
+/**
+ * spi_nor_destroy_erase_cmd_list() - destroy erase command list
+ * @erase_list:	list of erase commands
+ */
+static void spi_nor_destroy_erase_cmd_list(struct list_head *erase_list)
+{
+	struct spi_nor_erase_command *cmd, *next;
+
+	list_for_each_entry_safe(cmd, next, erase_list, list) {
+		list_del(&cmd->list);
+		kfree(cmd);
+	}
+}
+
+/**
+ * spi_nor_init_erase_cmd_list() - initialize erase command list
+ * @nor:	pointer to a 'struct spi_nor'
+ * @erase_list:	list of erase commands to be executed once we validate that the
+ *		erase can be performed
+ * @addr:	offset in the serial flash memory
+ * @len:	number of bytes to erase
+ *
+ * Builds the list of best fitted erase commands and verifies if the erase can
+ * be performed.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_init_erase_cmd_list(struct spi_nor *nor,
+				       struct list_head *erase_list,
+				       u64 addr, u32 len)
+{
+	const struct spi_nor_erase_map *map = &nor->params->erase_map;
+	const struct spi_nor_erase_type *erase, *prev_erase = NULL;
+	struct spi_nor_erase_region *region;
+	struct spi_nor_erase_command *cmd = NULL;
+	u64 region_end;
+	int ret = -EINVAL;
+
+	region = spi_nor_find_erase_region(map, addr);
+	if (IS_ERR(region))
+		return PTR_ERR(region);
+
+	region_end = spi_nor_region_end(region);
+
+	while (len) {
+		erase = spi_nor_find_best_erase_type(map, region, addr, len);
+		if (!erase)
+			goto destroy_erase_cmd_list;
+
+		if (prev_erase != erase ||
+		    erase->size != cmd->size ||
+		    region->offset & SNOR_OVERLAID_REGION) {
+			cmd = spi_nor_init_erase_cmd(region, erase);
+			if (IS_ERR(cmd)) {
+				ret = PTR_ERR(cmd);
+				goto destroy_erase_cmd_list;
+			}
+
+			list_add_tail(&cmd->list, erase_list);
+		} else {
+			cmd->count++;
+		}
+
+		addr += cmd->size;
+		len -= cmd->size;
+
+		if (len && addr >= region_end) {
+			region = spi_nor_region_next(region);
+			if (!region)
+				goto destroy_erase_cmd_list;
+			region_end = spi_nor_region_end(region);
+		}
+
+		prev_erase = erase;
+	}
+
+	return 0;
+
+destroy_erase_cmd_list:
+	spi_nor_destroy_erase_cmd_list(erase_list);
+	return ret;
+}
+
+/**
+ * spi_nor_erase_multi_sectors() - perform a non-uniform erase
+ * @nor:	pointer to a 'struct spi_nor'
+ * @addr:	offset in the serial flash memory
+ * @len:	number of bytes to erase
+ *
+ * Build a list of best fitted erase commands and execute it once we validate
+ * that the erase can be performed.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_erase_multi_sectors(struct spi_nor *nor, u64 addr, u32 len)
+{
+	LIST_HEAD(erase_list);
+	struct spi_nor_erase_command *cmd, *next;
+	int ret;
+
+	ret = spi_nor_init_erase_cmd_list(nor, &erase_list, addr, len);
+	if (ret)
+		return ret;
+
+	list_for_each_entry_safe(cmd, next, &erase_list, list) {
+		nor->erase_opcode = cmd->opcode;
+		while (cmd->count) {
+			dev_vdbg(nor->dev, "erase_cmd->size = 0x%08x, erase_cmd->opcode = 0x%02x, erase_cmd->count = %u\n",
+				 cmd->size, cmd->opcode, cmd->count);
+
+			ret = spi_nor_lock_device(nor);
+			if (ret)
+				goto destroy_erase_cmd_list;
+
+			ret = spi_nor_write_enable(nor);
+			if (ret) {
+				spi_nor_unlock_device(nor);
+				goto destroy_erase_cmd_list;
+			}
+
+			ret = spi_nor_erase_sector(nor, addr);
+			spi_nor_unlock_device(nor);
+			if (ret)
+				goto destroy_erase_cmd_list;
+
+			ret = spi_nor_wait_till_ready(nor);
+			if (ret)
+				goto destroy_erase_cmd_list;
+
+			addr += cmd->size;
+			cmd->count--;
+		}
+		list_del(&cmd->list);
+		kfree(cmd);
+	}
+
+	return 0;
+
+destroy_erase_cmd_list:
+	spi_nor_destroy_erase_cmd_list(&erase_list);
+	return ret;
+}
+
+/*
+ * Erase an address range on the nor chip.  The address range may extend
+ * one or more erase sectors. Return an error if there is a problem erasing.
+ */
+static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	u32 addr, len;
+	uint32_t rem;
+	int ret;
+
+	dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr,
+			(long long)instr->len);
+
+	if (spi_nor_has_uniform_erase(nor)) {
+		div_u64_rem(instr->len, mtd->erasesize, &rem);
+		if (rem)
+			return -EINVAL;
+	}
+
+	addr = instr->addr;
+	len = instr->len;
+
+	ret = spi_nor_prep_and_lock_pe(nor, instr->addr, instr->len);
+	if (ret)
+		return ret;
+
+	/* whole-chip erase? */
+	if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
+		unsigned long timeout;
+
+		ret = spi_nor_lock_device(nor);
+		if (ret)
+			goto erase_err;
+
+		ret = spi_nor_write_enable(nor);
+		if (ret) {
+			spi_nor_unlock_device(nor);
+			goto erase_err;
+		}
+
+		ret = spi_nor_erase_chip(nor);
+		spi_nor_unlock_device(nor);
+		if (ret)
+			goto erase_err;
+
+		/*
+		 * Scale the timeout linearly with the size of the flash, with
+		 * a minimum calibrated to an old 2MB flash. We could try to
+		 * pull these from CFI/SFDP, but these values should be good
+		 * enough for now.
+		 */
+		timeout = max(CHIP_ERASE_2MB_READY_WAIT_JIFFIES,
+			      CHIP_ERASE_2MB_READY_WAIT_JIFFIES *
+			      (unsigned long)(mtd->size / SZ_2M));
+		ret = spi_nor_wait_till_ready_with_timeout(nor, timeout);
+		if (ret)
+			goto erase_err;
+
+	/* REVISIT in some cases we could speed up erasing large regions
+	 * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K.  We may have set up
+	 * to use "small sector erase", but that's not always optimal.
+	 */
+
+	/* "sector"-at-a-time erase */
+	} else if (spi_nor_has_uniform_erase(nor)) {
+		while (len) {
+			ret = spi_nor_lock_device(nor);
+			if (ret)
+				goto erase_err;
+
+			ret = spi_nor_write_enable(nor);
+			if (ret) {
+				spi_nor_unlock_device(nor);
+				goto erase_err;
+			}
+
+			ret = spi_nor_erase_sector(nor, addr);
+			spi_nor_unlock_device(nor);
+			if (ret)
+				goto erase_err;
+
+			ret = spi_nor_wait_till_ready(nor);
+			if (ret)
+				goto erase_err;
+
+			addr += mtd->erasesize;
+			len -= mtd->erasesize;
+		}
+
+	/* erase multiple sectors */
+	} else {
+		ret = spi_nor_erase_multi_sectors(nor, addr, len);
+		if (ret)
+			goto erase_err;
+	}
+
+	ret = spi_nor_write_disable(nor);
+
+erase_err:
+	spi_nor_unlock_and_unprep_pe(nor, instr->addr, instr->len);
+
+	return ret;
+}
+
+/**
+ * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status
+ * Register 1.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * Bit 6 of the Status Register 1 is the QE bit for Macronix like QSPI memories.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)
+		return 0;
+
+	nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6;
+
+	return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]);
+}
+
+/**
+ * spi_nor_sr2_bit1_quad_enable() - set the Quad Enable BIT(1) in the Status
+ * Register 2.
+ * @nor:       pointer to a 'struct spi_nor'.
+ *
+ * Bit 1 of the Status Register 2 is the QE bit for Spansion like QSPI memories.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
+{
+	int ret;
+
+	if (nor->flags & SNOR_F_NO_READ_CR)
+		return spi_nor_write_16bit_cr_and_check(nor, SR2_QUAD_EN_BIT1);
+
+	ret = spi_nor_read_cr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)
+		return 0;
+
+	nor->bouncebuf[0] |= SR2_QUAD_EN_BIT1;
+
+	return spi_nor_write_16bit_cr_and_check(nor, nor->bouncebuf[0]);
+}
+
+/**
+ * spi_nor_sr2_bit7_quad_enable() - set QE bit in Status Register 2.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * Set the Quad Enable (QE) bit in the Status Register 2.
+ *
+ * This is one of the procedures to set the QE bit described in the SFDP
+ * (JESD216 rev B) specification but no manufacturer using this procedure has
+ * been identified yet, hence the name of the function.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
+{
+	u8 *sr2 = nor->bouncebuf;
+	int ret;
+	u8 sr2_written;
+
+	/* Check current Quad Enable bit value. */
+	ret = spi_nor_read_sr2(nor, sr2);
+	if (ret)
+		return ret;
+	if (*sr2 & SR2_QUAD_EN_BIT7)
+		return 0;
+
+	/* Update the Quad Enable bit. */
+	*sr2 |= SR2_QUAD_EN_BIT7;
+
+	ret = spi_nor_write_sr2(nor, sr2);
+	if (ret)
+		return ret;
+
+	sr2_written = *sr2;
+
+	/* Read back and check it. */
+	ret = spi_nor_read_sr2(nor, sr2);
+	if (ret)
+		return ret;
+
+	if (*sr2 != sr2_written) {
+		dev_dbg(nor->dev, "SR2: Read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static const struct spi_nor_manufacturer *manufacturers[] = {
+	&spi_nor_atmel,
+	&spi_nor_catalyst,
+	&spi_nor_eon,
+	&spi_nor_esmt,
+	&spi_nor_everspin,
+	&spi_nor_fujitsu,
+	&spi_nor_gigadevice,
+	&spi_nor_intel,
+	&spi_nor_issi,
+	&spi_nor_macronix,
+	&spi_nor_micron,
+	&spi_nor_st,
+	&spi_nor_spansion,
+	&spi_nor_sst,
+	&spi_nor_winbond,
+	&spi_nor_xilinx,
+	&spi_nor_xmc,
+};
+
+static const struct flash_info spi_nor_generic_flash = {
+	.name = "spi-nor-generic",
+	.n_banks = 1,
+	/*
+	 * JESD216 rev A doesn't specify the page size, therefore we need a
+	 * sane default.
+	 */
+	.page_size = 256,
+	.parse_sfdp = true,
+};
+
+static const struct flash_info *spi_nor_match_id(struct spi_nor *nor,
+						 const u8 *id)
+{
+	const struct flash_info *part;
+	unsigned int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(manufacturers); i++) {
+		for (j = 0; j < manufacturers[i]->nparts; j++) {
+			part = &manufacturers[i]->parts[j];
+			if (part->id_len &&
+			    !memcmp(part->id, id, part->id_len)) {
+				nor->manufacturer = manufacturers[i];
+				return part;
+			}
+		}
+	}
+
+	return NULL;
+}
+
+static const struct flash_info *spi_nor_detect(struct spi_nor *nor)
+{
+	const struct flash_info *info;
+	u8 *id = nor->bouncebuf;
+	int ret;
+
+	ret = spi_nor_read_id(nor, 0, 0, id, nor->reg_proto);
+	if (ret) {
+		dev_dbg(nor->dev, "error %d reading JEDEC ID\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	/* Cache the complete flash ID. */
+	nor->id = devm_kmemdup(nor->dev, id, SPI_NOR_MAX_ID_LEN, GFP_KERNEL);
+	if (!nor->id)
+		return ERR_PTR(-ENOMEM);
+
+	info = spi_nor_match_id(nor, id);
+
+	/* Fallback to a generic flash described only by its SFDP data. */
+	if (!info) {
+		ret = spi_nor_check_sfdp_signature(nor);
+		if (!ret)
+			info = &spi_nor_generic_flash;
+	}
+
+	if (!info) {
+		dev_err(nor->dev, "unrecognized JEDEC id bytes: %*ph\n",
+			SPI_NOR_MAX_ID_LEN, id);
+		return ERR_PTR(-ENODEV);
+	}
+	return info;
+}
+
+static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, u_char *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	loff_t from_lock = from;
+	size_t len_lock = len;
+	ssize_t ret;
+
+	dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len);
+
+	ret = spi_nor_prep_and_lock_rd(nor, from_lock, len_lock);
+	if (ret)
+		return ret;
+
+	while (len) {
+		loff_t addr = from;
+
+		addr = spi_nor_convert_addr(nor, addr);
+
+		ret = spi_nor_read_data(nor, addr, len, buf);
+		if (ret == 0) {
+			/* We shouldn't see 0-length reads */
+			ret = -EIO;
+			goto read_err;
+		}
+		if (ret < 0)
+			goto read_err;
+
+		WARN_ON(ret > len);
+		*retlen += ret;
+		buf += ret;
+		from += ret;
+		len -= ret;
+	}
+	ret = 0;
+
+read_err:
+	spi_nor_unlock_and_unprep_rd(nor, from_lock, len_lock);
+
+	return ret;
+}
+
+/*
+ * Write an address range to the nor chip.  Data must be written in
+ * FLASH_PAGESIZE chunks.  The address range may be any size provided
+ * it is within the physical boundaries.
+ */
+static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
+	size_t *retlen, const u_char *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	size_t page_offset, page_remain, i;
+	ssize_t ret;
+	u32 page_size = nor->params->page_size;
+
+	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+
+	ret = spi_nor_prep_and_lock_pe(nor, to, len);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < len; ) {
+		ssize_t written;
+		loff_t addr = to + i;
+
+		/*
+		 * If page_size is a power of two, the offset can be quickly
+		 * calculated with an AND operation. On the other cases we
+		 * need to do a modulus operation (more expensive).
+		 */
+		if (is_power_of_2(page_size)) {
+			page_offset = addr & (page_size - 1);
+		} else {
+			uint64_t aux = addr;
+
+			page_offset = do_div(aux, page_size);
+		}
+		/* the size of data remaining on the first page */
+		page_remain = min_t(size_t, page_size - page_offset, len - i);
+
+		addr = spi_nor_convert_addr(nor, addr);
+
+		ret = spi_nor_lock_device(nor);
+		if (ret)
+			goto write_err;
+
+		ret = spi_nor_write_enable(nor);
+		if (ret) {
+			spi_nor_unlock_device(nor);
+			goto write_err;
+		}
+
+		ret = spi_nor_write_data(nor, addr, page_remain, buf + i);
+		spi_nor_unlock_device(nor);
+		if (ret < 0)
+			goto write_err;
+		written = ret;
+
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto write_err;
+		*retlen += written;
+		i += written;
+	}
+
+write_err:
+	spi_nor_unlock_and_unprep_pe(nor, to, len);
+
+	return ret;
+}
+
+static int spi_nor_check(struct spi_nor *nor)
+{
+	if (!nor->dev ||
+	    (!nor->spimem && !nor->controller_ops) ||
+	    (!nor->spimem && nor->controller_ops &&
+	    (!nor->controller_ops->read ||
+	     !nor->controller_ops->write ||
+	     !nor->controller_ops->read_reg ||
+	     !nor->controller_ops->write_reg))) {
+		pr_err("spi-nor: please fill all the necessary fields!\n");
+		return -EINVAL;
+	}
+
+	if (nor->spimem && nor->controller_ops) {
+		dev_err(nor->dev, "nor->spimem and nor->controller_ops are mutually exclusive, please set just one of them.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void
+spi_nor_set_read_settings(struct spi_nor_read_command *read,
+			  u8 num_mode_clocks,
+			  u8 num_wait_states,
+			  u8 opcode,
+			  enum spi_nor_protocol proto)
+{
+	read->num_mode_clocks = num_mode_clocks;
+	read->num_wait_states = num_wait_states;
+	read->opcode = opcode;
+	read->proto = proto;
+}
+
+void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode,
+			     enum spi_nor_protocol proto)
+{
+	pp->opcode = opcode;
+	pp->proto = proto;
+}
+
+static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size)
+{
+	size_t i;
+
+	for (i = 0; i < size; i++)
+		if (table[i][0] == (int)hwcaps)
+			return table[i][1];
+
+	return -EINVAL;
+}
+
+int spi_nor_hwcaps_read2cmd(u32 hwcaps)
+{
+	static const int hwcaps_read2cmd[][2] = {
+		{ SNOR_HWCAPS_READ,		SNOR_CMD_READ },
+		{ SNOR_HWCAPS_READ_FAST,	SNOR_CMD_READ_FAST },
+		{ SNOR_HWCAPS_READ_1_1_1_DTR,	SNOR_CMD_READ_1_1_1_DTR },
+		{ SNOR_HWCAPS_READ_1_1_2,	SNOR_CMD_READ_1_1_2 },
+		{ SNOR_HWCAPS_READ_1_2_2,	SNOR_CMD_READ_1_2_2 },
+		{ SNOR_HWCAPS_READ_2_2_2,	SNOR_CMD_READ_2_2_2 },
+		{ SNOR_HWCAPS_READ_1_2_2_DTR,	SNOR_CMD_READ_1_2_2_DTR },
+		{ SNOR_HWCAPS_READ_1_1_4,	SNOR_CMD_READ_1_1_4 },
+		{ SNOR_HWCAPS_READ_1_4_4,	SNOR_CMD_READ_1_4_4 },
+		{ SNOR_HWCAPS_READ_4_4_4,	SNOR_CMD_READ_4_4_4 },
+		{ SNOR_HWCAPS_READ_1_4_4_DTR,	SNOR_CMD_READ_1_4_4_DTR },
+		{ SNOR_HWCAPS_READ_1_1_8,	SNOR_CMD_READ_1_1_8 },
+		{ SNOR_HWCAPS_READ_1_8_8,	SNOR_CMD_READ_1_8_8 },
+		{ SNOR_HWCAPS_READ_8_8_8,	SNOR_CMD_READ_8_8_8 },
+		{ SNOR_HWCAPS_READ_1_8_8_DTR,	SNOR_CMD_READ_1_8_8_DTR },
+		{ SNOR_HWCAPS_READ_8_8_8_DTR,	SNOR_CMD_READ_8_8_8_DTR },
+	};
+
+	return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd,
+				  ARRAY_SIZE(hwcaps_read2cmd));
+}
+
+int spi_nor_hwcaps_pp2cmd(u32 hwcaps)
+{
+	static const int hwcaps_pp2cmd[][2] = {
+		{ SNOR_HWCAPS_PP,		SNOR_CMD_PP },
+		{ SNOR_HWCAPS_PP_1_1_4,		SNOR_CMD_PP_1_1_4 },
+		{ SNOR_HWCAPS_PP_1_4_4,		SNOR_CMD_PP_1_4_4 },
+		{ SNOR_HWCAPS_PP_4_4_4,		SNOR_CMD_PP_4_4_4 },
+		{ SNOR_HWCAPS_PP_1_1_8,		SNOR_CMD_PP_1_1_8 },
+		{ SNOR_HWCAPS_PP_1_8_8,		SNOR_CMD_PP_1_8_8 },
+		{ SNOR_HWCAPS_PP_8_8_8,		SNOR_CMD_PP_8_8_8 },
+		{ SNOR_HWCAPS_PP_8_8_8_DTR,	SNOR_CMD_PP_8_8_8_DTR },
+	};
+
+	return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd,
+				  ARRAY_SIZE(hwcaps_pp2cmd));
+}
+
+/**
+ * spi_nor_spimem_check_op - check if the operation is supported
+ *                           by controller
+ *@nor:        pointer to a 'struct spi_nor'
+ *@op:         pointer to op template to be checked
+ *
+ * Returns 0 if operation is supported, -EOPNOTSUPP otherwise.
+ */
+static int spi_nor_spimem_check_op(struct spi_nor *nor,
+				   struct spi_mem_op *op)
+{
+	/*
+	 * First test with 4 address bytes. The opcode itself might
+	 * be a 3B addressing opcode but we don't care, because
+	 * SPI controller implementation should not check the opcode,
+	 * but just the sequence.
+	 */
+	op->addr.nbytes = 4;
+	if (!spi_mem_supports_op(nor->spimem, op)) {
+		if (nor->params->size > SZ_16M)
+			return -EOPNOTSUPP;
+
+		/* If flash size <= 16MB, 3 address bytes are sufficient */
+		op->addr.nbytes = 3;
+		if (!spi_mem_supports_op(nor->spimem, op))
+			return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+/**
+ * spi_nor_spimem_check_readop - check if the read op is supported
+ *                               by controller
+ *@nor:         pointer to a 'struct spi_nor'
+ *@read:        pointer to op template to be checked
+ *
+ * Returns 0 if operation is supported, -EOPNOTSUPP otherwise.
+ */
+static int spi_nor_spimem_check_readop(struct spi_nor *nor,
+				       const struct spi_nor_read_command *read)
+{
+	struct spi_mem_op op = SPI_NOR_READ_OP(read->opcode);
+
+	spi_nor_spimem_setup_op(nor, &op, read->proto);
+
+	/* convert the dummy cycles to the number of bytes */
+	op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) *
+			  op.dummy.buswidth / 8;
+	if (spi_nor_protocol_is_dtr(nor->read_proto))
+		op.dummy.nbytes *= 2;
+
+	return spi_nor_spimem_check_op(nor, &op);
+}
+
+/**
+ * spi_nor_spimem_check_pp - check if the page program op is supported
+ *                           by controller
+ *@nor:         pointer to a 'struct spi_nor'
+ *@pp:          pointer to op template to be checked
+ *
+ * Returns 0 if operation is supported, -EOPNOTSUPP otherwise.
+ */
+static int spi_nor_spimem_check_pp(struct spi_nor *nor,
+				   const struct spi_nor_pp_command *pp)
+{
+	struct spi_mem_op op = SPI_NOR_PP_OP(pp->opcode);
+
+	spi_nor_spimem_setup_op(nor, &op, pp->proto);
+
+	return spi_nor_spimem_check_op(nor, &op);
+}
+
+/**
+ * spi_nor_spimem_adjust_hwcaps - Find optimal Read/Write protocol
+ *                                based on SPI controller capabilities
+ * @nor:        pointer to a 'struct spi_nor'
+ * @hwcaps:     pointer to resulting capabilities after adjusting
+ *              according to controller and flash's capability
+ */
+static void
+spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	unsigned int cap;
+
+	/* X-X-X modes are not supported yet, mask them all. */
+	*hwcaps &= ~SNOR_HWCAPS_X_X_X;
+
+	/*
+	 * If the reset line is broken, we do not want to enter a stateful
+	 * mode.
+	 */
+	if (nor->flags & SNOR_F_BROKEN_RESET)
+		*hwcaps &= ~(SNOR_HWCAPS_X_X_X | SNOR_HWCAPS_X_X_X_DTR);
+
+	for (cap = 0; cap < sizeof(*hwcaps) * BITS_PER_BYTE; cap++) {
+		int rdidx, ppidx;
+
+		if (!(*hwcaps & BIT(cap)))
+			continue;
+
+		rdidx = spi_nor_hwcaps_read2cmd(BIT(cap));
+		if (rdidx >= 0 &&
+		    spi_nor_spimem_check_readop(nor, &params->reads[rdidx]))
+			*hwcaps &= ~BIT(cap);
+
+		ppidx = spi_nor_hwcaps_pp2cmd(BIT(cap));
+		if (ppidx < 0)
+			continue;
+
+		if (spi_nor_spimem_check_pp(nor,
+					    &params->page_programs[ppidx]))
+			*hwcaps &= ~BIT(cap);
+	}
+}
+
+/**
+ * spi_nor_set_erase_type() - set a SPI NOR erase type
+ * @erase:	pointer to a structure that describes a SPI NOR erase type
+ * @size:	the size of the sector/block erased by the erase type
+ * @opcode:	the SPI command op code to erase the sector/block
+ */
+void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
+			    u8 opcode)
+{
+	erase->size = size;
+	erase->opcode = opcode;
+	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
+	erase->size_shift = ffs(erase->size) - 1;
+	erase->size_mask = (1 << erase->size_shift) - 1;
+}
+
+/**
+ * spi_nor_mask_erase_type() - mask out a SPI NOR erase type
+ * @erase:	pointer to a structure that describes a SPI NOR erase type
+ */
+void spi_nor_mask_erase_type(struct spi_nor_erase_type *erase)
+{
+	erase->size = 0;
+}
+
+/**
+ * spi_nor_init_uniform_erase_map() - Initialize uniform erase map
+ * @map:		the erase map of the SPI NOR
+ * @erase_mask:		bitmask encoding erase types that can erase the entire
+ *			flash memory
+ * @flash_size:		the spi nor flash memory size
+ */
+void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
+				    u8 erase_mask, u64 flash_size)
+{
+	/* Offset 0 with erase_mask and SNOR_LAST_REGION bit set */
+	map->uniform_region.offset = (erase_mask & SNOR_ERASE_TYPE_MASK) |
+				     SNOR_LAST_REGION;
+	map->uniform_region.size = flash_size;
+	map->regions = &map->uniform_region;
+	map->uniform_erase_type = erase_mask;
+}
+
+int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
+			     const struct sfdp_parameter_header *bfpt_header,
+			     const struct sfdp_bfpt *bfpt)
+{
+	int ret;
+
+	if (nor->manufacturer && nor->manufacturer->fixups &&
+	    nor->manufacturer->fixups->post_bfpt) {
+		ret = nor->manufacturer->fixups->post_bfpt(nor, bfpt_header,
+							   bfpt);
+		if (ret)
+			return ret;
+	}
+
+	if (nor->info->fixups && nor->info->fixups->post_bfpt)
+		return nor->info->fixups->post_bfpt(nor, bfpt_header, bfpt);
+
+	return 0;
+}
+
+static int spi_nor_select_read(struct spi_nor *nor,
+			       u32 shared_hwcaps)
+{
+	int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
+	const struct spi_nor_read_command *read;
+
+	if (best_match < 0)
+		return -EINVAL;
+
+	cmd = spi_nor_hwcaps_read2cmd(BIT(best_match));
+	if (cmd < 0)
+		return -EINVAL;
+
+	read = &nor->params->reads[cmd];
+	nor->read_opcode = read->opcode;
+	nor->read_proto = read->proto;
+
+	/*
+	 * In the SPI NOR framework, we don't need to make the difference
+	 * between mode clock cycles and wait state clock cycles.
+	 * Indeed, the value of the mode clock cycles is used by a QSPI
+	 * flash memory to know whether it should enter or leave its 0-4-4
+	 * (Continuous Read / XIP) mode.
+	 * eXecution In Place is out of the scope of the mtd sub-system.
+	 * Hence we choose to merge both mode and wait state clock cycles
+	 * into the so called dummy clock cycles.
+	 */
+	nor->read_dummy = read->num_mode_clocks + read->num_wait_states;
+	return 0;
+}
+
+static int spi_nor_select_pp(struct spi_nor *nor,
+			     u32 shared_hwcaps)
+{
+	int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1;
+	const struct spi_nor_pp_command *pp;
+
+	if (best_match < 0)
+		return -EINVAL;
+
+	cmd = spi_nor_hwcaps_pp2cmd(BIT(best_match));
+	if (cmd < 0)
+		return -EINVAL;
+
+	pp = &nor->params->page_programs[cmd];
+	nor->program_opcode = pp->opcode;
+	nor->write_proto = pp->proto;
+	return 0;
+}
+
+/**
+ * spi_nor_select_uniform_erase() - select optimum uniform erase type
+ * @map:		the erase map of the SPI NOR
+ * @wanted_size:	the erase type size to search for. Contains the value of
+ *			info->sector_size, the "small sector" size in case
+ *			CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined or 0 if
+ *			there is no information about the sector size. The
+ *			latter is the case if the flash parameters are parsed
+ *			solely by SFDP, then the largest supported erase type
+ *			is selected.
+ *
+ * Once the optimum uniform sector erase command is found, disable all the
+ * other.
+ *
+ * Return: pointer to erase type on success, NULL otherwise.
+ */
+static const struct spi_nor_erase_type *
+spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
+			     const u32 wanted_size)
+{
+	const struct spi_nor_erase_type *tested_erase, *erase = NULL;
+	int i;
+	u8 uniform_erase_type = map->uniform_erase_type;
+
+	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+		if (!(uniform_erase_type & BIT(i)))
+			continue;
+
+		tested_erase = &map->erase_type[i];
+
+		/* Skip masked erase types. */
+		if (!tested_erase->size)
+			continue;
+
+		/*
+		 * If the current erase size is the one, stop here:
+		 * we have found the right uniform Sector Erase command.
+		 */
+		if (tested_erase->size == wanted_size) {
+			erase = tested_erase;
+			break;
+		}
+
+		/*
+		 * Otherwise, the current erase size is still a valid candidate.
+		 * Select the biggest valid candidate.
+		 */
+		if (!erase && tested_erase->size)
+			erase = tested_erase;
+			/* keep iterating to find the wanted_size */
+	}
+
+	if (!erase)
+		return NULL;
+
+	/* Disable all other Sector Erase commands. */
+	map->uniform_erase_type &= ~SNOR_ERASE_TYPE_MASK;
+	map->uniform_erase_type |= BIT(erase - map->erase_type);
+	return erase;
+}
+
+static int spi_nor_select_erase(struct spi_nor *nor)
+{
+	struct spi_nor_erase_map *map = &nor->params->erase_map;
+	const struct spi_nor_erase_type *erase = NULL;
+	struct mtd_info *mtd = &nor->mtd;
+	u32 wanted_size = nor->info->sector_size;
+	int i;
+
+	/*
+	 * The previous implementation handling Sector Erase commands assumed
+	 * that the SPI flash memory has an uniform layout then used only one
+	 * of the supported erase sizes for all Sector Erase commands.
+	 * So to be backward compatible, the new implementation also tries to
+	 * manage the SPI flash memory as uniform with a single erase sector
+	 * size, when possible.
+	 */
+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+	/* prefer "small sector" erase if possible */
+	wanted_size = 4096u;
+#endif
+
+	if (spi_nor_has_uniform_erase(nor)) {
+		erase = spi_nor_select_uniform_erase(map, wanted_size);
+		if (!erase)
+			return -EINVAL;
+		nor->erase_opcode = erase->opcode;
+		mtd->erasesize = erase->size;
+		return 0;
+	}
+
+	/*
+	 * For non-uniform SPI flash memory, set mtd->erasesize to the
+	 * maximum erase sector size. No need to set nor->erase_opcode.
+	 */
+	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+		if (map->erase_type[i].size) {
+			erase = &map->erase_type[i];
+			break;
+		}
+	}
+
+	if (!erase)
+		return -EINVAL;
+
+	mtd->erasesize = erase->size;
+	return 0;
+}
+
+static int spi_nor_default_setup(struct spi_nor *nor,
+				 const struct spi_nor_hwcaps *hwcaps)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	u32 ignored_mask, shared_mask;
+	int err;
+
+	/*
+	 * Keep only the hardware capabilities supported by both the SPI
+	 * controller and the SPI flash memory.
+	 */
+	shared_mask = hwcaps->mask & params->hwcaps.mask;
+
+	if (nor->spimem) {
+		/*
+		 * When called from spi_nor_probe(), all caps are set and we
+		 * need to discard some of them based on what the SPI
+		 * controller actually supports (using spi_mem_supports_op()).
+		 */
+		spi_nor_spimem_adjust_hwcaps(nor, &shared_mask);
+	} else {
+		/*
+		 * SPI n-n-n protocols are not supported when the SPI
+		 * controller directly implements the spi_nor interface.
+		 * Yet another reason to switch to spi-mem.
+		 */
+		ignored_mask = SNOR_HWCAPS_X_X_X | SNOR_HWCAPS_X_X_X_DTR;
+		if (shared_mask & ignored_mask) {
+			dev_dbg(nor->dev,
+				"SPI n-n-n protocols are not supported.\n");
+			shared_mask &= ~ignored_mask;
+		}
+	}
+
+	/* Select the (Fast) Read command. */
+	err = spi_nor_select_read(nor, shared_mask);
+	if (err) {
+		dev_dbg(nor->dev,
+			"can't select read settings supported by both the SPI controller and memory.\n");
+		return err;
+	}
+
+	/* Select the Page Program command. */
+	err = spi_nor_select_pp(nor, shared_mask);
+	if (err) {
+		dev_dbg(nor->dev,
+			"can't select write settings supported by both the SPI controller and memory.\n");
+		return err;
+	}
+
+	/* Select the Sector Erase command. */
+	err = spi_nor_select_erase(nor);
+	if (err) {
+		dev_dbg(nor->dev,
+			"can't select erase settings supported by both the SPI controller and memory.\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int spi_nor_set_addr_nbytes(struct spi_nor *nor)
+{
+	if (nor->params->addr_nbytes) {
+		nor->addr_nbytes = nor->params->addr_nbytes;
+	} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
+		/*
+		 * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
+		 * in this protocol an odd addr_nbytes cannot be used because
+		 * then the address phase would only span a cycle and a half.
+		 * Half a cycle would be left over. We would then have to start
+		 * the dummy phase in the middle of a cycle and so too the data
+		 * phase, and we will end the transaction with half a cycle left
+		 * over.
+		 *
+		 * Force all 8D-8D-8D flashes to use an addr_nbytes of 4 to
+		 * avoid this situation.
+		 */
+		nor->addr_nbytes = 4;
+	} else if (nor->info->addr_nbytes) {
+		nor->addr_nbytes = nor->info->addr_nbytes;
+	} else {
+		nor->addr_nbytes = 3;
+	}
+
+	if (nor->addr_nbytes == 3 && nor->params->size > 0x1000000) {
+		/* enable 4-byte addressing if the device exceeds 16MiB */
+		nor->addr_nbytes = 4;
+	}
+
+	if (nor->addr_nbytes > SPI_NOR_MAX_ADDR_NBYTES) {
+		dev_dbg(nor->dev, "The number of address bytes is too large: %u\n",
+			nor->addr_nbytes);
+		return -EINVAL;
+	}
+
+	/* Set 4byte opcodes when possible. */
+	if (nor->addr_nbytes == 4 && nor->flags & SNOR_F_4B_OPCODES &&
+	    !(nor->flags & SNOR_F_HAS_4BAIT))
+		spi_nor_set_4byte_opcodes(nor);
+
+	return 0;
+}
+
+static int spi_nor_setup(struct spi_nor *nor,
+			 const struct spi_nor_hwcaps *hwcaps)
+{
+	int ret;
+
+	if (nor->params->setup)
+		ret = nor->params->setup(nor, hwcaps);
+	else
+		ret = spi_nor_default_setup(nor, hwcaps);
+	if (ret)
+		return ret;
+
+	return spi_nor_set_addr_nbytes(nor);
+}
+
+/**
+ * spi_nor_manufacturer_init_params() - Initialize the flash's parameters and
+ * settings based on MFR register and ->default_init() hook.
+ * @nor:	pointer to a 'struct spi_nor'.
+ */
+static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
+{
+	if (nor->manufacturer && nor->manufacturer->fixups &&
+	    nor->manufacturer->fixups->default_init)
+		nor->manufacturer->fixups->default_init(nor);
+
+	if (nor->info->fixups && nor->info->fixups->default_init)
+		nor->info->fixups->default_init(nor);
+}
+
+/**
+ * spi_nor_no_sfdp_init_params() - Initialize the flash's parameters and
+ * settings based on nor->info->sfdp_flags. This method should be called only by
+ * flashes that do not define SFDP tables. If the flash supports SFDP but the
+ * information is wrong and the settings from this function can not be retrieved
+ * by parsing SFDP, one should instead use the fixup hooks and update the wrong
+ * bits.
+ * @nor:	pointer to a 'struct spi_nor'.
+ */
+static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	struct spi_nor_erase_map *map = &params->erase_map;
+	const u8 no_sfdp_flags = nor->info->no_sfdp_flags;
+	u8 i, erase_mask;
+
+	if (no_sfdp_flags & SPI_NOR_DUAL_READ) {
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_2],
+					  0, 8, SPINOR_OP_READ_1_1_2,
+					  SNOR_PROTO_1_1_2);
+	}
+
+	if (no_sfdp_flags & SPI_NOR_QUAD_READ) {
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_4],
+					  0, 8, SPINOR_OP_READ_1_1_4,
+					  SNOR_PROTO_1_1_4);
+	}
+
+	if (no_sfdp_flags & SPI_NOR_OCTAL_READ) {
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_8],
+					  0, 8, SPINOR_OP_READ_1_1_8,
+					  SNOR_PROTO_1_1_8);
+	}
+
+	if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_READ) {
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR;
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_8_8_8_DTR],
+					  0, 20, SPINOR_OP_READ_FAST,
+					  SNOR_PROTO_8_8_8_DTR);
+	}
+
+	if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_PP) {
+		params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8_DTR;
+		/*
+		 * Since xSPI Page Program opcode is backward compatible with
+		 * Legacy SPI, use Legacy SPI opcode there as well.
+		 */
+		spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_8_8_8_DTR],
+					SPINOR_OP_PP, SNOR_PROTO_8_8_8_DTR);
+	}
+
+	/*
+	 * Sector Erase settings. Sort Erase Types in ascending order, with the
+	 * smallest erase size starting at BIT(0).
+	 */
+	erase_mask = 0;
+	i = 0;
+	if (no_sfdp_flags & SECT_4K) {
+		erase_mask |= BIT(i);
+		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
+				       SPINOR_OP_BE_4K);
+		i++;
+	}
+	erase_mask |= BIT(i);
+	spi_nor_set_erase_type(&map->erase_type[i], nor->info->sector_size,
+			       SPINOR_OP_SE);
+	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
+}
+
+/**
+ * spi_nor_init_flags() - Initialize NOR flags for settings that are not defined
+ * in the JESD216 SFDP standard, thus can not be retrieved when parsing SFDP.
+ * @nor:	pointer to a 'struct spi_nor'
+ */
+static void spi_nor_init_flags(struct spi_nor *nor)
+{
+	struct device_node *np = spi_nor_get_flash_node(nor);
+	const u16 flags = nor->info->flags;
+
+	if (of_property_read_bool(np, "broken-flash-reset"))
+		nor->flags |= SNOR_F_BROKEN_RESET;
+
+	if (of_property_read_bool(np, "no-wp"))
+		nor->flags |= SNOR_F_NO_WP;
+
+	if (flags & SPI_NOR_SWP_IS_VOLATILE)
+		nor->flags |= SNOR_F_SWP_IS_VOLATILE;
+
+	if (flags & SPI_NOR_HAS_LOCK)
+		nor->flags |= SNOR_F_HAS_LOCK;
+
+	if (flags & SPI_NOR_HAS_TB) {
+		nor->flags |= SNOR_F_HAS_SR_TB;
+		if (flags & SPI_NOR_TB_SR_BIT6)
+			nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
+	}
+
+	if (flags & SPI_NOR_4BIT_BP) {
+		nor->flags |= SNOR_F_HAS_4BIT_BP;
+		if (flags & SPI_NOR_BP3_SR_BIT6)
+			nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
+	}
+
+	if (flags & NO_CHIP_ERASE)
+		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
+
+	if (flags & SPI_NOR_RWW && nor->info->n_banks > 1 &&
+	    !nor->controller_ops)
+		nor->flags |= SNOR_F_RWW;
+}
+
+/**
+ * spi_nor_init_fixup_flags() - Initialize NOR flags for settings that can not
+ * be discovered by SFDP for this particular flash because the SFDP table that
+ * indicates this support is not defined in the flash. In case the table for
+ * this support is defined but has wrong values, one should instead use a
+ * post_sfdp() hook to set the SNOR_F equivalent flag.
+ * @nor:       pointer to a 'struct spi_nor'
+ */
+static void spi_nor_init_fixup_flags(struct spi_nor *nor)
+{
+	const u8 fixup_flags = nor->info->fixup_flags;
+
+	if (fixup_flags & SPI_NOR_4B_OPCODES)
+		nor->flags |= SNOR_F_4B_OPCODES;
+
+	if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
+		nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+}
+
+/**
+ * spi_nor_late_init_params() - Late initialization of default flash parameters.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * Used to initialize flash parameters that are not declared in the JESD216
+ * SFDP standard, or where SFDP tables are not defined at all.
+ * Will replace the spi_nor_manufacturer_init_params() method.
+ */
+static int spi_nor_late_init_params(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	int ret;
+
+	if (nor->manufacturer && nor->manufacturer->fixups &&
+	    nor->manufacturer->fixups->late_init) {
+		ret = nor->manufacturer->fixups->late_init(nor);
+		if (ret)
+			return ret;
+	}
+
+	if (nor->info->fixups && nor->info->fixups->late_init) {
+		ret = nor->info->fixups->late_init(nor);
+		if (ret)
+			return ret;
+	}
+
+	/* Default method kept for backward compatibility. */
+	if (!params->set_4byte_addr_mode)
+		params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode_brwr;
+
+	spi_nor_init_flags(nor);
+	spi_nor_init_fixup_flags(nor);
+
+	/*
+	 * NOR protection support. When locking_ops are not provided, we pick
+	 * the default ones.
+	 */
+	if (nor->flags & SNOR_F_HAS_LOCK && !nor->params->locking_ops)
+		spi_nor_init_default_locking_ops(nor);
+
+	if (nor->info->n_banks > 1)
+		params->bank_size = div64_u64(params->size, nor->info->n_banks);
+
+	return 0;
+}
+
+/**
+ * spi_nor_sfdp_init_params_deprecated() - Deprecated way of initializing flash
+ * parameters and settings based on JESD216 SFDP standard.
+ * @nor:	pointer to a 'struct spi_nor'.
+ *
+ * The method has a roll-back mechanism: in case the SFDP parsing fails, the
+ * legacy flash parameters and settings will be restored.
+ */
+static void spi_nor_sfdp_init_params_deprecated(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter sfdp_params;
+
+	memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
+
+	if (spi_nor_parse_sfdp(nor)) {
+		memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
+		nor->flags &= ~SNOR_F_4B_OPCODES;
+	}
+}
+
+/**
+ * spi_nor_init_params_deprecated() - Deprecated way of initializing flash
+ * parameters and settings.
+ * @nor:	pointer to a 'struct spi_nor'.
+ *
+ * The method assumes that flash doesn't support SFDP so it initializes flash
+ * parameters in spi_nor_no_sfdp_init_params() which later on can be overwritten
+ * when parsing SFDP, if supported.
+ */
+static void spi_nor_init_params_deprecated(struct spi_nor *nor)
+{
+	spi_nor_no_sfdp_init_params(nor);
+
+	spi_nor_manufacturer_init_params(nor);
+
+	if (nor->info->no_sfdp_flags & (SPI_NOR_DUAL_READ |
+					SPI_NOR_QUAD_READ |
+					SPI_NOR_OCTAL_READ |
+					SPI_NOR_OCTAL_DTR_READ))
+		spi_nor_sfdp_init_params_deprecated(nor);
+}
+
+/**
+ * spi_nor_init_default_params() - Default initialization of flash parameters
+ * and settings. Done for all flashes, regardless is they define SFDP tables
+ * or not.
+ * @nor:	pointer to a 'struct spi_nor'.
+ */
+static void spi_nor_init_default_params(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	const struct flash_info *info = nor->info;
+	struct device_node *np = spi_nor_get_flash_node(nor);
+
+	params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+	params->otp.org = &info->otp_org;
+
+	/* Default to 16-bit Write Status (01h) Command */
+	nor->flags |= SNOR_F_HAS_16BIT_SR;
+
+	/* Set SPI NOR sizes. */
+	params->writesize = 1;
+	params->size = (u64)info->sector_size * info->n_sectors;
+	params->bank_size = params->size;
+	params->page_size = info->page_size;
+
+	if (!(info->flags & SPI_NOR_NO_FR)) {
+		/* Default to Fast Read for DT and non-DT platform devices. */
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
+
+		/* Mask out Fast Read if not requested at DT instantiation. */
+		if (np && !of_property_read_bool(np, "m25p,fast-read"))
+			params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
+	}
+
+	/* (Fast) Read settings. */
+	params->hwcaps.mask |= SNOR_HWCAPS_READ;
+	spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ],
+				  0, 0, SPINOR_OP_READ,
+				  SNOR_PROTO_1_1_1);
+
+	if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_FAST],
+					  0, 8, SPINOR_OP_READ_FAST,
+					  SNOR_PROTO_1_1_1);
+	/* Page Program settings. */
+	params->hwcaps.mask |= SNOR_HWCAPS_PP;
+	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
+				SPINOR_OP_PP, SNOR_PROTO_1_1_1);
+
+	if (info->flags & SPI_NOR_QUAD_PP) {
+		params->hwcaps.mask |= SNOR_HWCAPS_PP_1_1_4;
+		spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_1_1_4],
+					SPINOR_OP_PP_1_1_4, SNOR_PROTO_1_1_4);
+	}
+}
+
+/**
+ * spi_nor_init_params() - Initialize the flash's parameters and settings.
+ * @nor:	pointer to a 'struct spi_nor'.
+ *
+ * The flash parameters and settings are initialized based on a sequence of
+ * calls that are ordered by priority:
+ *
+ * 1/ Default flash parameters initialization. The initializations are done
+ *    based on nor->info data:
+ *		spi_nor_info_init_params()
+ *
+ * which can be overwritten by:
+ * 2/ Manufacturer flash parameters initialization. The initializations are
+ *    done based on MFR register, or when the decisions can not be done solely
+ *    based on MFR, by using specific flash_info tweeks, ->default_init():
+ *		spi_nor_manufacturer_init_params()
+ *
+ * which can be overwritten by:
+ * 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and
+ *    should be more accurate that the above.
+ *		spi_nor_parse_sfdp() or spi_nor_no_sfdp_init_params()
+ *
+ *    Please note that there is a ->post_bfpt() fixup hook that can overwrite
+ *    the flash parameters and settings immediately after parsing the Basic
+ *    Flash Parameter Table.
+ *    spi_nor_post_sfdp_fixups() is called after the SFDP tables are parsed.
+ *    It is used to tweak various flash parameters when information provided
+ *    by the SFDP tables are wrong.
+ *
+ * which can be overwritten by:
+ * 4/ Late flash parameters initialization, used to initialize flash
+ * parameters that are not declared in the JESD216 SFDP standard, or where SFDP
+ * tables are not defined at all.
+ *		spi_nor_late_init_params()
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_init_params(struct spi_nor *nor)
+{
+	int ret;
+
+	nor->params = devm_kzalloc(nor->dev, sizeof(*nor->params), GFP_KERNEL);
+	if (!nor->params)
+		return -ENOMEM;
+
+	spi_nor_init_default_params(nor);
+
+	if (nor->info->parse_sfdp) {
+		ret = spi_nor_parse_sfdp(nor);
+		if (ret) {
+			dev_err(nor->dev, "BFPT parsing failed. Please consider using SPI_NOR_SKIP_SFDP when declaring the flash\n");
+			return ret;
+		}
+	} else if (nor->info->no_sfdp_flags & SPI_NOR_SKIP_SFDP) {
+		spi_nor_no_sfdp_init_params(nor);
+	} else {
+		spi_nor_init_params_deprecated(nor);
+	}
+
+	return spi_nor_late_init_params(nor);
+}
+
+/** spi_nor_set_octal_dtr() - enable or disable Octal DTR I/O.
+ * @nor:                 pointer to a 'struct spi_nor'
+ * @enable:              whether to enable or disable Octal DTR
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_set_octal_dtr(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	if (!nor->params->set_octal_dtr)
+		return 0;
+
+	if (!(nor->read_proto == SNOR_PROTO_8_8_8_DTR &&
+	      nor->write_proto == SNOR_PROTO_8_8_8_DTR))
+		return 0;
+
+	if (!(nor->flags & SNOR_F_IO_MODE_EN_VOLATILE))
+		return 0;
+
+	ret = nor->params->set_octal_dtr(nor, enable);
+	if (ret)
+		return ret;
+
+	if (enable)
+		nor->reg_proto = SNOR_PROTO_8_8_8_DTR;
+	else
+		nor->reg_proto = SNOR_PROTO_1_1_1;
+
+	return 0;
+}
+
+/**
+ * spi_nor_quad_enable() - enable Quad I/O if needed.
+ * @nor:                pointer to a 'struct spi_nor'
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_quad_enable(struct spi_nor *nor)
+{
+	if (!nor->params->quad_enable)
+		return 0;
+
+	if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 ||
+	      spi_nor_get_protocol_width(nor->write_proto) == 4))
+		return 0;
+
+	return nor->params->quad_enable(nor);
+}
+
+/**
+ * spi_nor_set_4byte_addr_mode() - Set address mode.
+ * @nor:                pointer to a 'struct spi_nor'.
+ * @enable:             enable/disable 4 byte address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	int ret;
+
+	ret = params->set_4byte_addr_mode(nor, enable);
+	if (ret && ret != -ENOTSUPP)
+		return ret;
+
+	if (enable) {
+		params->addr_nbytes = 4;
+		params->addr_mode_nbytes = 4;
+	} else {
+		params->addr_nbytes = 3;
+		params->addr_mode_nbytes = 3;
+	}
+
+	return 0;
+}
+
+static int spi_nor_init(struct spi_nor *nor)
+{
+	int err;
+
+	err = spi_nor_set_octal_dtr(nor, true);
+	if (err) {
+		dev_dbg(nor->dev, "octal mode not supported\n");
+		return err;
+	}
+
+	err = spi_nor_quad_enable(nor);
+	if (err) {
+		dev_dbg(nor->dev, "quad mode not supported\n");
+		return err;
+	}
+
+	/*
+	 * Some SPI NOR flashes are write protected by default after a power-on
+	 * reset cycle, in order to avoid inadvertent writes during power-up.
+	 * Backward compatibility imposes to unlock the entire flash memory
+	 * array at power-up by default. Depending on the kernel configuration
+	 * (1) do nothing, (2) always unlock the entire flash array or (3)
+	 * unlock the entire flash array only when the software write
+	 * protection bits are volatile. The latter is indicated by
+	 * SNOR_F_SWP_IS_VOLATILE.
+	 */
+	if (IS_ENABLED(CONFIG_MTD_SPI_NOR_SWP_DISABLE) ||
+	    (IS_ENABLED(CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE) &&
+	     nor->flags & SNOR_F_SWP_IS_VOLATILE))
+		spi_nor_try_unlock_all(nor);
+
+	if (nor->addr_nbytes == 4 &&
+	    nor->read_proto != SNOR_PROTO_8_8_8_DTR &&
+	    !(nor->flags & SNOR_F_4B_OPCODES)) {
+		/*
+		 * If the RESET# pin isn't hooked up properly, or the system
+		 * otherwise doesn't perform a reset command in the boot
+		 * sequence, it's impossible to 100% protect against unexpected
+		 * reboots (e.g., crashes). Warn the user (or hopefully, system
+		 * designer) that this is bad.
+		 */
+		WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
+			  "enabling reset hack; may not recover from unexpected reboots\n");
+		err = spi_nor_set_4byte_addr_mode(nor, true);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+/**
+ * spi_nor_soft_reset() - Perform a software reset
+ * @nor:	pointer to 'struct spi_nor'
+ *
+ * Performs a "Soft Reset and Enter Default Protocol Mode" sequence which resets
+ * the device to its power-on-reset state. This is useful when the software has
+ * made some changes to device (volatile) registers and needs to reset it before
+ * shutting down, for example.
+ *
+ * Not every flash supports this sequence. The same set of opcodes might be used
+ * for some other operation on a flash that does not support this. Support for
+ * this sequence can be discovered via SFDP in the BFPT table.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static void spi_nor_soft_reset(struct spi_nor *nor)
+{
+	struct spi_mem_op op;
+	int ret;
+
+	op = (struct spi_mem_op)SPINOR_SRSTEN_OP;
+
+	spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+	ret = spi_mem_exec_op(nor->spimem, &op);
+	if (ret) {
+		dev_warn(nor->dev, "Software reset failed: %d\n", ret);
+		return;
+	}
+
+	op = (struct spi_mem_op)SPINOR_SRST_OP;
+
+	spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+	ret = spi_mem_exec_op(nor->spimem, &op);
+	if (ret) {
+		dev_warn(nor->dev, "Software reset failed: %d\n", ret);
+		return;
+	}
+
+	/*
+	 * Software Reset is not instant, and the delay varies from flash to
+	 * flash. Looking at a few flashes, most range somewhere below 100
+	 * microseconds. So, sleep for a range of 200-400 us.
+	 */
+	usleep_range(SPI_NOR_SRST_SLEEP_MIN, SPI_NOR_SRST_SLEEP_MAX);
+}
+
+/* mtd suspend handler */
+static int spi_nor_suspend(struct mtd_info *mtd)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	int ret;
+
+	/* Disable octal DTR mode if we enabled it. */
+	ret = spi_nor_set_octal_dtr(nor, false);
+	if (ret)
+		dev_err(nor->dev, "suspend() failed\n");
+
+	return ret;
+}
+
+/* mtd resume handler */
+static void spi_nor_resume(struct mtd_info *mtd)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	struct device *dev = nor->dev;
+	int ret;
+
+	/* re-initialize the nor chip */
+	ret = spi_nor_init(nor);
+	if (ret)
+		dev_err(dev, "resume() failed\n");
+}
+
+static int spi_nor_get_device(struct mtd_info *mtd)
+{
+	struct mtd_info *master = mtd_get_master(mtd);
+	struct spi_nor *nor = mtd_to_spi_nor(master);
+	struct device *dev;
+
+	if (nor->spimem)
+		dev = nor->spimem->spi->controller->dev.parent;
+	else
+		dev = nor->dev;
+
+	if (!try_module_get(dev->driver->owner))
+		return -ENODEV;
+
+	return 0;
+}
+
+static void spi_nor_put_device(struct mtd_info *mtd)
+{
+	struct mtd_info *master = mtd_get_master(mtd);
+	struct spi_nor *nor = mtd_to_spi_nor(master);
+	struct device *dev;
+
+	if (nor->spimem)
+		dev = nor->spimem->spi->controller->dev.parent;
+	else
+		dev = nor->dev;
+
+	module_put(dev->driver->owner);
+}
+
+static void spi_nor_restore(struct spi_nor *nor)
+{
+	int ret;
+
+	/* restore the addressing mode */
+	if (nor->addr_nbytes == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
+	    nor->flags & SNOR_F_BROKEN_RESET) {
+		ret = spi_nor_set_4byte_addr_mode(nor, false);
+		if (ret)
+			/*
+			 * Do not stop the execution in the hope that the flash
+			 * will default to the 3-byte address mode after the
+			 * software reset.
+			 */
+			dev_err(nor->dev, "Failed to exit 4-byte address mode, err = %d\n", ret);
+	}
+
+	if (nor->flags & SNOR_F_SOFT_RESET)
+		spi_nor_soft_reset(nor);
+}
+
+static const struct flash_info *spi_nor_match_name(struct spi_nor *nor,
+						   const char *name)
+{
+	unsigned int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(manufacturers); i++) {
+		for (j = 0; j < manufacturers[i]->nparts; j++) {
+			if (!strcmp(name, manufacturers[i]->parts[j].name)) {
+				nor->manufacturer = manufacturers[i];
+				return &manufacturers[i]->parts[j];
+			}
+		}
+	}
+
+	return NULL;
+}
+
+static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor,
+						       const char *name)
+{
+	const struct flash_info *info = NULL;
+
+	if (name)
+		info = spi_nor_match_name(nor, name);
+	/* Try to auto-detect if chip name wasn't specified or not found */
+	if (!info)
+		return spi_nor_detect(nor);
+
+	/*
+	 * If caller has specified name of flash model that can normally be
+	 * detected using JEDEC, let's verify it.
+	 */
+	if (name && info->id_len) {
+		const struct flash_info *jinfo;
+
+		jinfo = spi_nor_detect(nor);
+		if (IS_ERR(jinfo)) {
+			return jinfo;
+		} else if (jinfo != info) {
+			/*
+			 * JEDEC knows better, so overwrite platform ID. We
+			 * can't trust partitions any longer, but we'll let
+			 * mtd apply them anyway, since some partitions may be
+			 * marked read-only, and we don't want to loose that
+			 * information, even if it's not 100% accurate.
+			 */
+			dev_warn(nor->dev, "found %s, expected %s\n",
+				 jinfo->name, info->name);
+			info = jinfo;
+		}
+	}
+
+	return info;
+}
+
+static void spi_nor_set_mtd_info(struct spi_nor *nor)
+{
+	struct mtd_info *mtd = &nor->mtd;
+	struct device *dev = nor->dev;
+
+	spi_nor_set_mtd_locking_ops(nor);
+	spi_nor_set_mtd_otp_ops(nor);
+
+	mtd->dev.parent = dev;
+	if (!mtd->name)
+		mtd->name = dev_name(dev);
+	mtd->type = MTD_NORFLASH;
+	mtd->flags = MTD_CAP_NORFLASH;
+	/* Unset BIT_WRITEABLE to enable JFFS2 write buffer for ECC'd NOR */
+	if (nor->flags & SNOR_F_ECC)
+		mtd->flags &= ~MTD_BIT_WRITEABLE;
+	if (nor->info->flags & SPI_NOR_NO_ERASE)
+		mtd->flags |= MTD_NO_ERASE;
+	else
+		mtd->_erase = spi_nor_erase;
+	mtd->writesize = nor->params->writesize;
+	mtd->writebufsize = nor->params->page_size;
+	mtd->size = nor->params->size;
+	mtd->_read = spi_nor_read;
+	/* Might be already set by some SST flashes. */
+	if (!mtd->_write)
+		mtd->_write = spi_nor_write;
+	mtd->_suspend = spi_nor_suspend;
+	mtd->_resume = spi_nor_resume;
+	mtd->_get_device = spi_nor_get_device;
+	mtd->_put_device = spi_nor_put_device;
+}
+
+static int spi_nor_hw_reset(struct spi_nor *nor)
+{
+	struct gpio_desc *reset;
+
+	reset = devm_gpiod_get_optional(nor->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR_OR_NULL(reset))
+		return PTR_ERR_OR_ZERO(reset);
+
+	/*
+	 * Experimental delay values by looking at different flash device
+	 * vendors datasheets.
+	 */
+	usleep_range(1, 5);
+	gpiod_set_value_cansleep(reset, 1);
+	usleep_range(100, 150);
+	gpiod_set_value_cansleep(reset, 0);
+	usleep_range(1000, 1200);
+
+	return 0;
+}
+
+int spi_nor_scan(struct spi_nor *nor, const char *name,
+		 const struct spi_nor_hwcaps *hwcaps)
+{
+	const struct flash_info *info;
+	struct device *dev = nor->dev;
+	struct mtd_info *mtd = &nor->mtd;
+	int ret;
+	int i;
+
+	ret = spi_nor_check(nor);
+	if (ret)
+		return ret;
+
+	/* Reset SPI protocol for all commands. */
+	nor->reg_proto = SNOR_PROTO_1_1_1;
+	nor->read_proto = SNOR_PROTO_1_1_1;
+	nor->write_proto = SNOR_PROTO_1_1_1;
+
+	/*
+	 * We need the bounce buffer early to read/write registers when going
+	 * through the spi-mem layer (buffers have to be DMA-able).
+	 * For spi-mem drivers, we'll reallocate a new buffer if
+	 * nor->params->page_size turns out to be greater than PAGE_SIZE (which
+	 * shouldn't happen before long since NOR pages are usually less
+	 * than 1KB) after spi_nor_scan() returns.
+	 */
+	nor->bouncebuf_size = PAGE_SIZE;
+	nor->bouncebuf = devm_kmalloc(dev, nor->bouncebuf_size,
+				      GFP_KERNEL);
+	if (!nor->bouncebuf)
+		return -ENOMEM;
+
+	ret = spi_nor_hw_reset(nor);
+	if (ret)
+		return ret;
+
+	info = spi_nor_get_flash_info(nor, name);
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	nor->info = info;
+
+	mutex_init(&nor->lock);
+
+	/* Init flash parameters based on flash_info struct and SFDP */
+	ret = spi_nor_init_params(nor);
+	if (ret)
+		return ret;
+
+	if (spi_nor_use_parallel_locking(nor))
+		init_waitqueue_head(&nor->rww.wait);
+
+	/*
+	 * Configure the SPI memory:
+	 * - select op codes for (Fast) Read, Page Program and Sector Erase.
+	 * - set the number of dummy cycles (mode cycles + wait states).
+	 * - set the SPI protocols for register and memory accesses.
+	 * - set the number of address bytes.
+	 */
+	ret = spi_nor_setup(nor, hwcaps);
+	if (ret)
+		return ret;
+
+	/* Send all the required SPI flash commands to initialize device */
+	ret = spi_nor_init(nor);
+	if (ret)
+		return ret;
+
+	/* No mtd_info fields should be used up to this point. */
+	spi_nor_set_mtd_info(nor);
+
+	dev_info(dev, "%s (%lld Kbytes)\n", info->name,
+			(long long)mtd->size >> 10);
+
+	dev_dbg(dev,
+		"mtd .name = %s, .size = 0x%llx (%lldMiB), "
+		".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
+		mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20),
+		mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions);
+
+	if (mtd->numeraseregions)
+		for (i = 0; i < mtd->numeraseregions; i++)
+			dev_dbg(dev,
+				"mtd.eraseregions[%d] = { .offset = 0x%llx, "
+				".erasesize = 0x%.8x (%uKiB), "
+				".numblocks = %d }\n",
+				i, (long long)mtd->eraseregions[i].offset,
+				mtd->eraseregions[i].erasesize,
+				mtd->eraseregions[i].erasesize / 1024,
+				mtd->eraseregions[i].numblocks);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_nor_scan);
+
+static int spi_nor_create_read_dirmap(struct spi_nor *nor)
+{
+	struct spi_mem_dirmap_info info = {
+		.op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
+				      SPI_MEM_OP_ADDR(nor->addr_nbytes, 0, 0),
+				      SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
+				      SPI_MEM_OP_DATA_IN(0, NULL, 0)),
+		.offset = 0,
+		.length = nor->params->size,
+	};
+	struct spi_mem_op *op = &info.op_tmpl;
+
+	spi_nor_spimem_setup_op(nor, op, nor->read_proto);
+
+	/* convert the dummy cycles to the number of bytes */
+	op->dummy.nbytes = (nor->read_dummy * op->dummy.buswidth) / 8;
+	if (spi_nor_protocol_is_dtr(nor->read_proto))
+		op->dummy.nbytes *= 2;
+
+	/*
+	 * Since spi_nor_spimem_setup_op() only sets buswidth when the number
+	 * of data bytes is non-zero, the data buswidth won't be set here. So,
+	 * do it explicitly.
+	 */
+	op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
+
+	nor->dirmap.rdesc = devm_spi_mem_dirmap_create(nor->dev, nor->spimem,
+						       &info);
+	return PTR_ERR_OR_ZERO(nor->dirmap.rdesc);
+}
+
+static int spi_nor_create_write_dirmap(struct spi_nor *nor)
+{
+	struct spi_mem_dirmap_info info = {
+		.op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 0),
+				      SPI_MEM_OP_ADDR(nor->addr_nbytes, 0, 0),
+				      SPI_MEM_OP_NO_DUMMY,
+				      SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
+		.offset = 0,
+		.length = nor->params->size,
+	};
+	struct spi_mem_op *op = &info.op_tmpl;
+
+	if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
+		op->addr.nbytes = 0;
+
+	spi_nor_spimem_setup_op(nor, op, nor->write_proto);
+
+	/*
+	 * Since spi_nor_spimem_setup_op() only sets buswidth when the number
+	 * of data bytes is non-zero, the data buswidth won't be set here. So,
+	 * do it explicitly.
+	 */
+	op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
+
+	nor->dirmap.wdesc = devm_spi_mem_dirmap_create(nor->dev, nor->spimem,
+						       &info);
+	return PTR_ERR_OR_ZERO(nor->dirmap.wdesc);
+}
+
+static int spi_nor_probe(struct spi_mem *spimem)
+{
+	struct spi_device *spi = spimem->spi;
+	struct flash_platform_data *data = dev_get_platdata(&spi->dev);
+	struct spi_nor *nor;
+	/*
+	 * Enable all caps by default. The core will mask them after
+	 * checking what's really supported using spi_mem_supports_op().
+	 */
+	const struct spi_nor_hwcaps hwcaps = { .mask = SNOR_HWCAPS_ALL };
+	char *flash_name;
+	int ret;
+
+	nor = devm_kzalloc(&spi->dev, sizeof(*nor), GFP_KERNEL);
+	if (!nor)
+		return -ENOMEM;
+
+	nor->spimem = spimem;
+	nor->dev = &spi->dev;
+	spi_nor_set_flash_node(nor, spi->dev.of_node);
+
+	spi_mem_set_drvdata(spimem, nor);
+
+	if (data && data->name)
+		nor->mtd.name = data->name;
+
+	if (!nor->mtd.name)
+		nor->mtd.name = spi_mem_get_name(spimem);
+
+	/*
+	 * For some (historical?) reason many platforms provide two different
+	 * names in flash_platform_data: "name" and "type". Quite often name is
+	 * set to "m25p80" and then "type" provides a real chip name.
+	 * If that's the case, respect "type" and ignore a "name".
+	 */
+	if (data && data->type)
+		flash_name = data->type;
+	else if (!strcmp(spi->modalias, "spi-nor"))
+		flash_name = NULL; /* auto-detect */
+	else
+		flash_name = spi->modalias;
+
+	ret = spi_nor_scan(nor, flash_name, &hwcaps);
+	if (ret)
+		return ret;
+
+	spi_nor_debugfs_register(nor);
+
+	/*
+	 * None of the existing parts have > 512B pages, but let's play safe
+	 * and add this logic so that if anyone ever adds support for such
+	 * a NOR we don't end up with buffer overflows.
+	 */
+	if (nor->params->page_size > PAGE_SIZE) {
+		nor->bouncebuf_size = nor->params->page_size;
+		devm_kfree(nor->dev, nor->bouncebuf);
+		nor->bouncebuf = devm_kmalloc(nor->dev,
+					      nor->bouncebuf_size,
+					      GFP_KERNEL);
+		if (!nor->bouncebuf)
+			return -ENOMEM;
+	}
+
+	ret = spi_nor_create_read_dirmap(nor);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_create_write_dirmap(nor);
+	if (ret)
+		return ret;
+
+	return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
+				   data ? data->nr_parts : 0);
+}
+
+static int spi_nor_remove(struct spi_mem *spimem)
+{
+	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+
+	spi_nor_restore(nor);
+
+	/* Clean up MTD stuff. */
+	return mtd_device_unregister(&nor->mtd);
+}
+
+static void spi_nor_shutdown(struct spi_mem *spimem)
+{
+	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+
+	spi_nor_restore(nor);
+}
+
+/*
+ * Do NOT add to this array without reading the following:
+ *
+ * Historically, many flash devices are bound to this driver by their name. But
+ * since most of these flash are compatible to some extent, and their
+ * differences can often be differentiated by the JEDEC read-ID command, we
+ * encourage new users to add support to the spi-nor library, and simply bind
+ * against a generic string here (e.g., "jedec,spi-nor").
+ *
+ * Many flash names are kept here in this list to keep them available
+ * as module aliases for existing platforms.
+ */
+static const struct spi_device_id spi_nor_dev_ids[] = {
+	/*
+	 * Allow non-DT platform devices to bind to the "spi-nor" modalias, and
+	 * hack around the fact that the SPI core does not provide uevent
+	 * matching for .of_match_table
+	 */
+	{"spi-nor"},
+
+	/*
+	 * Entries not used in DTs that should be safe to drop after replacing
+	 * them with "spi-nor" in platform data.
+	 */
+	{"s25sl064a"},	{"w25x16"},	{"m25p10"},	{"m25px64"},
+
+	/*
+	 * Entries that were used in DTs without "jedec,spi-nor" fallback and
+	 * should be kept for backward compatibility.
+	 */
+	{"at25df321a"},	{"at25df641"},	{"at26df081a"},
+	{"mx25l4005a"},	{"mx25l1606e"},	{"mx25l6405d"},	{"mx25l12805d"},
+	{"mx25l25635e"},{"mx66l51235l"},
+	{"n25q064"},	{"n25q128a11"},	{"n25q128a13"},	{"n25q512a"},
+	{"s25fl256s1"},	{"s25fl512s"},	{"s25sl12801"},	{"s25fl008k"},
+	{"s25fl064k"},
+	{"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"},
+	{"m25p40"},	{"m25p80"},	{"m25p16"},	{"m25p32"},
+	{"m25p64"},	{"m25p128"},
+	{"w25x80"},	{"w25x32"},	{"w25q32"},	{"w25q32dw"},
+	{"w25q80bl"},	{"w25q128"},	{"w25q256"},
+
+	/* Flashes that can't be detected using JEDEC */
+	{"m25p05-nonjedec"},	{"m25p10-nonjedec"},	{"m25p20-nonjedec"},
+	{"m25p40-nonjedec"},	{"m25p80-nonjedec"},	{"m25p16-nonjedec"},
+	{"m25p32-nonjedec"},	{"m25p64-nonjedec"},	{"m25p128-nonjedec"},
+
+	/* Everspin MRAMs (non-JEDEC) */
+	{ "mr25h128" }, /* 128 Kib, 40 MHz */
+	{ "mr25h256" }, /* 256 Kib, 40 MHz */
+	{ "mr25h10" },  /*   1 Mib, 40 MHz */
+	{ "mr25h40" },  /*   4 Mib, 40 MHz */
+
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, spi_nor_dev_ids);
+
+static const struct of_device_id spi_nor_of_table[] = {
+	/*
+	 * Generic compatibility for SPI NOR that can be identified by the
+	 * JEDEC READ ID opcode (0x9F). Use this, if possible.
+	 */
+	{ .compatible = "jedec,spi-nor" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, spi_nor_of_table);
+
+/*
+ * REVISIT: many of these chips have deep power-down modes, which
+ * should clearly be entered on suspend() to minimize power use.
+ * And also when they're otherwise idle...
+ */
+static struct spi_mem_driver spi_nor_driver = {
+	.spidrv = {
+		.driver = {
+			.name = "spi-nor",
+			.of_match_table = spi_nor_of_table,
+			.dev_groups = spi_nor_sysfs_groups,
+		},
+		.id_table = spi_nor_dev_ids,
+	},
+	.probe = spi_nor_probe,
+	.remove = spi_nor_remove,
+	.shutdown = spi_nor_shutdown,
+};
+
+static int __init spi_nor_module_init(void)
+{
+	return spi_mem_driver_register(&spi_nor_driver);
+}
+module_init(spi_nor_module_init);
+
+static void __exit spi_nor_module_exit(void)
+{
+	spi_mem_driver_unregister(&spi_nor_driver);
+	spi_nor_debugfs_shutdown();
+}
+module_exit(spi_nor_module_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
+MODULE_AUTHOR("Mike Lavender");
+MODULE_DESCRIPTION("framework for SPI NOR");
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
new file mode 100644
index 0000000000..9217379b9c
--- /dev/null
+++ b/drivers/mtd/spi-nor/core.h
@@ -0,0 +1,745 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#ifndef __LINUX_MTD_SPI_NOR_INTERNAL_H
+#define __LINUX_MTD_SPI_NOR_INTERNAL_H
+
+#include "sfdp.h"
+
+#define SPI_NOR_MAX_ID_LEN	6
+
+/* Standard SPI NOR flash operations. */
+#define SPI_NOR_READID_OP(naddr, ndummy, buf, len)			\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 0),			\
+		   SPI_MEM_OP_ADDR(naddr, 0, 0),			\
+		   SPI_MEM_OP_DUMMY(ndummy, 0),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 0))
+
+#define SPI_NOR_WREN_OP							\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPI_NOR_WRDI_OP							\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPI_NOR_RDSR_OP(buf)						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_IN(1, buf, 0))
+
+#define SPI_NOR_WRSR_OP(buf, len)					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(len, buf, 0))
+
+#define SPI_NOR_RDSR2_OP(buf)						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(1, buf, 0))
+
+#define SPI_NOR_WRSR2_OP(buf)						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(1, buf, 0))
+
+#define SPI_NOR_RDCR_OP(buf)						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_IN(1, buf, 0))
+
+#define SPI_NOR_EN4B_EX4B_OP(enable)					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B, 0),	\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPI_NOR_BRWR_OP(buf)						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(1, buf, 0))
+
+#define SPI_NOR_GBULK_OP						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_GBULK, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPI_NOR_CHIP_ERASE_OP						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CHIP_ERASE, 0),		\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_nbytes, addr)		\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0),				\
+		   SPI_MEM_OP_ADDR(addr_nbytes, addr, 0),		\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPI_NOR_READ_OP(opcode)						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0),				\
+		   SPI_MEM_OP_ADDR(3, 0, 0),				\
+		   SPI_MEM_OP_DUMMY(1, 0),				\
+		   SPI_MEM_OP_DATA_IN(2, NULL, 0))
+
+#define SPI_NOR_PP_OP(opcode)						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0),				\
+		   SPI_MEM_OP_ADDR(3, 0, 0),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(2, NULL, 0))
+
+#define SPINOR_SRSTEN_OP						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRSTEN, 0),			\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPINOR_SRST_OP							\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRST, 0),			\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DATA)
+
+/* Keep these in sync with the list in debugfs.c */
+enum spi_nor_option_flags {
+	SNOR_F_HAS_SR_TB	= BIT(0),
+	SNOR_F_NO_OP_CHIP_ERASE	= BIT(1),
+	SNOR_F_BROKEN_RESET	= BIT(2),
+	SNOR_F_4B_OPCODES	= BIT(3),
+	SNOR_F_HAS_4BAIT	= BIT(4),
+	SNOR_F_HAS_LOCK		= BIT(5),
+	SNOR_F_HAS_16BIT_SR	= BIT(6),
+	SNOR_F_NO_READ_CR	= BIT(7),
+	SNOR_F_HAS_SR_TB_BIT6	= BIT(8),
+	SNOR_F_HAS_4BIT_BP      = BIT(9),
+	SNOR_F_HAS_SR_BP3_BIT6  = BIT(10),
+	SNOR_F_IO_MODE_EN_VOLATILE = BIT(11),
+	SNOR_F_SOFT_RESET	= BIT(12),
+	SNOR_F_SWP_IS_VOLATILE	= BIT(13),
+	SNOR_F_RWW		= BIT(14),
+	SNOR_F_ECC		= BIT(15),
+	SNOR_F_NO_WP		= BIT(16),
+};
+
+struct spi_nor_read_command {
+	u8			num_mode_clocks;
+	u8			num_wait_states;
+	u8			opcode;
+	enum spi_nor_protocol	proto;
+};
+
+struct spi_nor_pp_command {
+	u8			opcode;
+	enum spi_nor_protocol	proto;
+};
+
+enum spi_nor_read_command_index {
+	SNOR_CMD_READ,
+	SNOR_CMD_READ_FAST,
+	SNOR_CMD_READ_1_1_1_DTR,
+
+	/* Dual SPI */
+	SNOR_CMD_READ_1_1_2,
+	SNOR_CMD_READ_1_2_2,
+	SNOR_CMD_READ_2_2_2,
+	SNOR_CMD_READ_1_2_2_DTR,
+
+	/* Quad SPI */
+	SNOR_CMD_READ_1_1_4,
+	SNOR_CMD_READ_1_4_4,
+	SNOR_CMD_READ_4_4_4,
+	SNOR_CMD_READ_1_4_4_DTR,
+
+	/* Octal SPI */
+	SNOR_CMD_READ_1_1_8,
+	SNOR_CMD_READ_1_8_8,
+	SNOR_CMD_READ_8_8_8,
+	SNOR_CMD_READ_1_8_8_DTR,
+	SNOR_CMD_READ_8_8_8_DTR,
+
+	SNOR_CMD_READ_MAX
+};
+
+enum spi_nor_pp_command_index {
+	SNOR_CMD_PP,
+
+	/* Quad SPI */
+	SNOR_CMD_PP_1_1_4,
+	SNOR_CMD_PP_1_4_4,
+	SNOR_CMD_PP_4_4_4,
+
+	/* Octal SPI */
+	SNOR_CMD_PP_1_1_8,
+	SNOR_CMD_PP_1_8_8,
+	SNOR_CMD_PP_8_8_8,
+	SNOR_CMD_PP_8_8_8_DTR,
+
+	SNOR_CMD_PP_MAX
+};
+
+/**
+ * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type
+ * @size:		the size of the sector/block erased by the erase type.
+ *			JEDEC JESD216B imposes erase sizes to be a power of 2.
+ * @size_shift:		@size is a power of 2, the shift is stored in
+ *			@size_shift.
+ * @size_mask:		the size mask based on @size_shift.
+ * @opcode:		the SPI command op code to erase the sector/block.
+ * @idx:		Erase Type index as sorted in the Basic Flash Parameter
+ *			Table. It will be used to synchronize the supported
+ *			Erase Types with the ones identified in the SFDP
+ *			optional tables.
+ */
+struct spi_nor_erase_type {
+	u32	size;
+	u32	size_shift;
+	u32	size_mask;
+	u8	opcode;
+	u8	idx;
+};
+
+/**
+ * struct spi_nor_erase_command - Used for non-uniform erases
+ * The structure is used to describe a list of erase commands to be executed
+ * once we validate that the erase can be performed. The elements in the list
+ * are run-length encoded.
+ * @list:		for inclusion into the list of erase commands.
+ * @count:		how many times the same erase command should be
+ *			consecutively used.
+ * @size:		the size of the sector/block erased by the command.
+ * @opcode:		the SPI command op code to erase the sector/block.
+ */
+struct spi_nor_erase_command {
+	struct list_head	list;
+	u32			count;
+	u32			size;
+	u8			opcode;
+};
+
+/**
+ * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region
+ * @offset:		the offset in the data array of erase region start.
+ *			LSB bits are used as a bitmask encoding flags to
+ *			determine if this region is overlaid, if this region is
+ *			the last in the SPI NOR flash memory and to indicate
+ *			all the supported erase commands inside this region.
+ *			The erase types are sorted in ascending order with the
+ *			smallest Erase Type size being at BIT(0).
+ * @size:		the size of the region in bytes.
+ */
+struct spi_nor_erase_region {
+	u64		offset;
+	u64		size;
+};
+
+#define SNOR_ERASE_TYPE_MAX	4
+#define SNOR_ERASE_TYPE_MASK	GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0)
+
+#define SNOR_LAST_REGION	BIT(4)
+#define SNOR_OVERLAID_REGION	BIT(5)
+
+#define SNOR_ERASE_FLAGS_MAX	6
+#define SNOR_ERASE_FLAGS_MASK	GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0)
+
+/**
+ * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map
+ * @regions:		array of erase regions. The regions are consecutive in
+ *			address space. Walking through the regions is done
+ *			incrementally.
+ * @uniform_region:	a pre-allocated erase region for SPI NOR with a uniform
+ *			sector size (legacy implementation).
+ * @erase_type:		an array of erase types shared by all the regions.
+ *			The erase types are sorted in ascending order, with the
+ *			smallest Erase Type size being the first member in the
+ *			erase_type array.
+ * @uniform_erase_type:	bitmask encoding erase types that can erase the
+ *			entire memory. This member is completed at init by
+ *			uniform and non-uniform SPI NOR flash memories if they
+ *			support at least one erase type that can erase the
+ *			entire memory.
+ */
+struct spi_nor_erase_map {
+	struct spi_nor_erase_region	*regions;
+	struct spi_nor_erase_region	uniform_region;
+	struct spi_nor_erase_type	erase_type[SNOR_ERASE_TYPE_MAX];
+	u8				uniform_erase_type;
+};
+
+/**
+ * struct spi_nor_locking_ops - SPI NOR locking methods
+ * @lock:	lock a region of the SPI NOR.
+ * @unlock:	unlock a region of the SPI NOR.
+ * @is_locked:	check if a region of the SPI NOR is completely locked
+ */
+struct spi_nor_locking_ops {
+	int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+	int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+	int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+};
+
+/**
+ * struct spi_nor_otp_organization - Structure to describe the SPI NOR OTP regions
+ * @len:	size of one OTP region in bytes.
+ * @base:	start address of the OTP area.
+ * @offset:	offset between consecutive OTP regions if there are more
+ *              than one.
+ * @n_regions:	number of individual OTP regions.
+ */
+struct spi_nor_otp_organization {
+	size_t len;
+	loff_t base;
+	loff_t offset;
+	unsigned int n_regions;
+};
+
+/**
+ * struct spi_nor_otp_ops - SPI NOR OTP methods
+ * @read:	read from the SPI NOR OTP area.
+ * @write:	write to the SPI NOR OTP area.
+ * @lock:	lock an OTP region.
+ * @erase:	erase an OTP region.
+ * @is_locked:	check if an OTP region of the SPI NOR is locked.
+ */
+struct spi_nor_otp_ops {
+	int (*read)(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf);
+	int (*write)(struct spi_nor *nor, loff_t addr, size_t len,
+		     const u8 *buf);
+	int (*lock)(struct spi_nor *nor, unsigned int region);
+	int (*erase)(struct spi_nor *nor, loff_t addr);
+	int (*is_locked)(struct spi_nor *nor, unsigned int region);
+};
+
+/**
+ * struct spi_nor_otp - SPI NOR OTP grouping structure
+ * @org:	OTP region organization
+ * @ops:	OTP access ops
+ */
+struct spi_nor_otp {
+	const struct spi_nor_otp_organization *org;
+	const struct spi_nor_otp_ops *ops;
+};
+
+/**
+ * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
+ * Includes legacy flash parameters and settings that can be overwritten
+ * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
+ * Serial Flash Discoverable Parameters (SFDP) tables.
+ *
+ * @bank_size:		the flash memory bank density in bytes.
+ * @size:		the total flash memory density in bytes.
+ * @writesize		Minimal writable flash unit size. Defaults to 1. Set to
+ *			ECC unit size for ECC-ed flashes.
+ * @page_size:		the page size of the SPI NOR flash memory.
+ * @addr_nbytes:	number of address bytes to send.
+ * @addr_mode_nbytes:	number of address bytes of current address mode. Useful
+ *			when the flash operates with 4B opcodes but needs the
+ *			internal address mode for opcodes that don't have a 4B
+ *			opcode correspondent.
+ * @rdsr_dummy:		dummy cycles needed for Read Status Register command
+ *			in octal DTR mode.
+ * @rdsr_addr_nbytes:	dummy address bytes needed for Read Status Register
+ *			command in octal DTR mode.
+ * @n_dice:		number of dice in the flash memory.
+ * @vreg_offset:	volatile register offset for each die.
+ * @hwcaps:		describes the read and page program hardware
+ *			capabilities.
+ * @reads:		read capabilities ordered by priority: the higher index
+ *                      in the array, the higher priority.
+ * @page_programs:	page program capabilities ordered by priority: the
+ *                      higher index in the array, the higher priority.
+ * @erase_map:		the erase map parsed from the SFDP Sector Map Parameter
+ *                      Table.
+ * @otp:		SPI NOR OTP info.
+ * @set_octal_dtr:	enables or disables SPI NOR octal DTR mode.
+ * @quad_enable:	enables SPI NOR quad mode.
+ * @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode.
+ * @convert_addr:	converts an absolute address into something the flash
+ *                      will understand. Particularly useful when pagesize is
+ *                      not a power-of-2.
+ * @setup:		(optional) configures the SPI NOR memory. Useful for
+ *			SPI NOR flashes that have peculiarities to the SPI NOR
+ *			standard e.g. different opcodes, specific address
+ *			calculation, page size, etc.
+ * @ready:		(optional) flashes might use a different mechanism
+ *			than reading the status register to indicate they
+ *			are ready for a new command
+ * @locking_ops:	SPI NOR locking methods.
+ * @priv:		flash's private data.
+ */
+struct spi_nor_flash_parameter {
+	u64				bank_size;
+	u64				size;
+	u32				writesize;
+	u32				page_size;
+	u8				addr_nbytes;
+	u8				addr_mode_nbytes;
+	u8				rdsr_dummy;
+	u8				rdsr_addr_nbytes;
+	u8				n_dice;
+	u32				*vreg_offset;
+
+	struct spi_nor_hwcaps		hwcaps;
+	struct spi_nor_read_command	reads[SNOR_CMD_READ_MAX];
+	struct spi_nor_pp_command	page_programs[SNOR_CMD_PP_MAX];
+
+	struct spi_nor_erase_map        erase_map;
+	struct spi_nor_otp		otp;
+
+	int (*set_octal_dtr)(struct spi_nor *nor, bool enable);
+	int (*quad_enable)(struct spi_nor *nor);
+	int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable);
+	u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
+	int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
+	int (*ready)(struct spi_nor *nor);
+
+	const struct spi_nor_locking_ops *locking_ops;
+	void *priv;
+};
+
+/**
+ * struct spi_nor_fixups - SPI NOR fixup hooks
+ * @default_init: called after default flash parameters init. Used to tweak
+ *                flash parameters when information provided by the flash_info
+ *                table is incomplete or wrong.
+ * @post_bfpt: called after the BFPT table has been parsed
+ * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs
+ *             that do not support RDSFDP). Typically used to tweak various
+ *             parameters that could not be extracted by other means (i.e.
+ *             when information provided by the SFDP/flash_info tables are
+ *             incomplete or wrong).
+ * @late_init: used to initialize flash parameters that are not declared in the
+ *             JESD216 SFDP standard, or where SFDP tables not defined at all.
+ *             Will replace the default_init() hook.
+ *
+ * Those hooks can be used to tweak the SPI NOR configuration when the SFDP
+ * table is broken or not available.
+ */
+struct spi_nor_fixups {
+	void (*default_init)(struct spi_nor *nor);
+	int (*post_bfpt)(struct spi_nor *nor,
+			 const struct sfdp_parameter_header *bfpt_header,
+			 const struct sfdp_bfpt *bfpt);
+	int (*post_sfdp)(struct spi_nor *nor);
+	int (*late_init)(struct spi_nor *nor);
+};
+
+/**
+ * struct flash_info - SPI NOR flash_info entry.
+ * @name: the name of the flash.
+ * @id:             the flash's ID bytes. The first three bytes are the
+ *                  JEDIC ID. JEDEC ID zero means "no ID" (mostly older chips).
+ * @id_len:         the number of bytes of ID.
+ * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
+ *                  isn't necessarily called a "sector" by the vendor.
+ * @n_sectors:      the number of sectors.
+ * @n_banks:        the number of banks.
+ * @page_size:      the flash's page size.
+ * @addr_nbytes:    number of address bytes to send.
+ *
+ * @parse_sfdp:     true when flash supports SFDP tables. The false value has no
+ *                  meaning. If one wants to skip the SFDP tables, one should
+ *                  instead use the SPI_NOR_SKIP_SFDP sfdp_flag.
+ * @flags:          flags that indicate support that is not defined by the
+ *                  JESD216 standard in its SFDP tables. Flag meanings:
+ *   SPI_NOR_HAS_LOCK:        flash supports lock/unlock via SR
+ *   SPI_NOR_HAS_TB:          flash SR has Top/Bottom (TB) protect bit. Must be
+ *                            used with SPI_NOR_HAS_LOCK.
+ *   SPI_NOR_TB_SR_BIT6:      Top/Bottom (TB) is bit 6 of status register.
+ *                            Must be used with SPI_NOR_HAS_TB.
+ *   SPI_NOR_4BIT_BP:         flash SR has 4 bit fields (BP0-3) for block
+ *                            protection.
+ *   SPI_NOR_BP3_SR_BIT6:     BP3 is bit 6 of status register. Must be used with
+ *                            SPI_NOR_4BIT_BP.
+ *   SPI_NOR_SWP_IS_VOLATILE: flash has volatile software write protection bits.
+ *                            Usually these will power-up in a write-protected
+ *                            state.
+ *   SPI_NOR_NO_ERASE:        no erase command needed.
+ *   NO_CHIP_ERASE:           chip does not support chip erase.
+ *   SPI_NOR_NO_FR:           can't do fastread.
+ *   SPI_NOR_QUAD_PP:         flash supports Quad Input Page Program.
+ *   SPI_NOR_RWW:             flash supports reads while write.
+ *
+ * @no_sfdp_flags:  flags that indicate support that can be discovered via SFDP.
+ *                  Used when SFDP tables are not defined in the flash. These
+ *                  flags are used together with the SPI_NOR_SKIP_SFDP flag.
+ *   SPI_NOR_SKIP_SFDP:       skip parsing of SFDP tables.
+ *   SECT_4K:                 SPINOR_OP_BE_4K works uniformly.
+ *   SPI_NOR_DUAL_READ:       flash supports Dual Read.
+ *   SPI_NOR_QUAD_READ:       flash supports Quad Read.
+ *   SPI_NOR_OCTAL_READ:      flash supports Octal Read.
+ *   SPI_NOR_OCTAL_DTR_READ:  flash supports octal DTR Read.
+ *   SPI_NOR_OCTAL_DTR_PP:    flash supports Octal DTR Page Program.
+ *
+ * @fixup_flags:    flags that indicate support that can be discovered via SFDP
+ *                  ideally, but can not be discovered for this particular flash
+ *                  because the SFDP table that indicates this support is not
+ *                  defined by the flash. In case the table for this support is
+ *                  defined but has wrong values, one should instead use a
+ *                  post_sfdp() hook to set the SNOR_F equivalent flag.
+ *
+ *   SPI_NOR_4B_OPCODES:      use dedicated 4byte address op codes to support
+ *                            memory size above 128Mib.
+ *   SPI_NOR_IO_MODE_EN_VOLATILE: flash enables the best available I/O mode
+ *                            via a volatile bit.
+ * @mfr_flags:      manufacturer private flags. Used in the manufacturer fixup
+ *                  hooks to differentiate support between flashes of the same
+ *                  manufacturer.
+ * @otp_org:        flash's OTP organization.
+ * @fixups:         part specific fixup hooks.
+ */
+struct flash_info {
+	char *name;
+	u8 id[SPI_NOR_MAX_ID_LEN];
+	u8 id_len;
+	unsigned sector_size;
+	u16 n_sectors;
+	u16 page_size;
+	u8 n_banks;
+	u8 addr_nbytes;
+
+	bool parse_sfdp;
+	u16 flags;
+#define SPI_NOR_HAS_LOCK		BIT(0)
+#define SPI_NOR_HAS_TB			BIT(1)
+#define SPI_NOR_TB_SR_BIT6		BIT(2)
+#define SPI_NOR_4BIT_BP			BIT(3)
+#define SPI_NOR_BP3_SR_BIT6		BIT(4)
+#define SPI_NOR_SWP_IS_VOLATILE		BIT(5)
+#define SPI_NOR_NO_ERASE		BIT(6)
+#define NO_CHIP_ERASE			BIT(7)
+#define SPI_NOR_NO_FR			BIT(8)
+#define SPI_NOR_QUAD_PP			BIT(9)
+#define SPI_NOR_RWW			BIT(10)
+
+	u8 no_sfdp_flags;
+#define SPI_NOR_SKIP_SFDP		BIT(0)
+#define SECT_4K				BIT(1)
+#define SPI_NOR_DUAL_READ		BIT(3)
+#define SPI_NOR_QUAD_READ		BIT(4)
+#define SPI_NOR_OCTAL_READ		BIT(5)
+#define SPI_NOR_OCTAL_DTR_READ		BIT(6)
+#define SPI_NOR_OCTAL_DTR_PP		BIT(7)
+
+	u8 fixup_flags;
+#define SPI_NOR_4B_OPCODES		BIT(0)
+#define SPI_NOR_IO_MODE_EN_VOLATILE	BIT(1)
+
+	u8 mfr_flags;
+
+	const struct spi_nor_otp_organization otp_org;
+	const struct spi_nor_fixups *fixups;
+};
+
+#define SPI_NOR_ID_2ITEMS(_id) ((_id) >> 8) & 0xff, (_id) & 0xff
+#define SPI_NOR_ID_3ITEMS(_id) ((_id) >> 16) & 0xff, SPI_NOR_ID_2ITEMS(_id)
+
+#define SPI_NOR_ID(_jedec_id, _ext_id)					\
+	.id = { SPI_NOR_ID_3ITEMS(_jedec_id), SPI_NOR_ID_2ITEMS(_ext_id) }, \
+	.id_len = !(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))
+
+#define SPI_NOR_ID6(_jedec_id, _ext_id)					\
+	.id = { SPI_NOR_ID_3ITEMS(_jedec_id), SPI_NOR_ID_3ITEMS(_ext_id) }, \
+	.id_len = 6
+
+#define SPI_NOR_GEOMETRY(_sector_size, _n_sectors, _n_banks)		\
+	.sector_size = (_sector_size),					\
+	.n_sectors = (_n_sectors),					\
+	.page_size = 256,						\
+	.n_banks = (_n_banks)
+
+/* Used when the "_ext_id" is two bytes at most */
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
+	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
+
+#define INFOB(_jedec_id, _ext_id, _sector_size, _n_sectors, _n_banks)	\
+	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), (_n_banks)),
+
+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
+	SPI_NOR_ID6((_jedec_id), (_ext_id)),				\
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
+
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes)	\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = (_page_size),				\
+		.n_banks = 1,						\
+		.addr_nbytes = (_addr_nbytes),				\
+		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
+
+#define OTP_INFO(_len, _n_regions, _base, _offset)			\
+		.otp_org = {						\
+			.len = (_len),					\
+			.base = (_base),				\
+			.offset = (_offset),				\
+			.n_regions = (_n_regions),			\
+		},
+
+#define PARSE_SFDP							\
+	.parse_sfdp = true,						\
+
+#define FLAGS(_flags)							\
+		.flags = (_flags),					\
+
+#define NO_SFDP_FLAGS(_no_sfdp_flags)					\
+		.no_sfdp_flags = (_no_sfdp_flags),			\
+
+#define FIXUP_FLAGS(_fixup_flags)					\
+		.fixup_flags = (_fixup_flags),				\
+
+#define MFR_FLAGS(_mfr_flags)						\
+		.mfr_flags = (_mfr_flags),				\
+
+/**
+ * struct spi_nor_manufacturer - SPI NOR manufacturer object
+ * @name: manufacturer name
+ * @parts: array of parts supported by this manufacturer
+ * @nparts: number of entries in the parts array
+ * @fixups: hooks called at various points in time during spi_nor_scan()
+ */
+struct spi_nor_manufacturer {
+	const char *name;
+	const struct flash_info *parts;
+	unsigned int nparts;
+	const struct spi_nor_fixups *fixups;
+};
+
+/**
+ * struct sfdp - SFDP data
+ * @num_dwords: number of entries in the dwords array
+ * @dwords: array of double words of the SFDP data
+ */
+struct sfdp {
+	size_t	num_dwords;
+	u32	*dwords;
+};
+
+/* Manufacturer drivers. */
+extern const struct spi_nor_manufacturer spi_nor_atmel;
+extern const struct spi_nor_manufacturer spi_nor_catalyst;
+extern const struct spi_nor_manufacturer spi_nor_eon;
+extern const struct spi_nor_manufacturer spi_nor_esmt;
+extern const struct spi_nor_manufacturer spi_nor_everspin;
+extern const struct spi_nor_manufacturer spi_nor_fujitsu;
+extern const struct spi_nor_manufacturer spi_nor_gigadevice;
+extern const struct spi_nor_manufacturer spi_nor_intel;
+extern const struct spi_nor_manufacturer spi_nor_issi;
+extern const struct spi_nor_manufacturer spi_nor_macronix;
+extern const struct spi_nor_manufacturer spi_nor_micron;
+extern const struct spi_nor_manufacturer spi_nor_st;
+extern const struct spi_nor_manufacturer spi_nor_spansion;
+extern const struct spi_nor_manufacturer spi_nor_sst;
+extern const struct spi_nor_manufacturer spi_nor_winbond;
+extern const struct spi_nor_manufacturer spi_nor_xilinx;
+extern const struct spi_nor_manufacturer spi_nor_xmc;
+
+extern const struct attribute_group *spi_nor_sysfs_groups[];
+
+void spi_nor_spimem_setup_op(const struct spi_nor *nor,
+			     struct spi_mem_op *op,
+			     const enum spi_nor_protocol proto);
+int spi_nor_write_enable(struct spi_nor *nor);
+int spi_nor_write_disable(struct spi_nor *nor);
+int spi_nor_set_4byte_addr_mode_en4b_ex4b(struct spi_nor *nor, bool enable);
+int spi_nor_set_4byte_addr_mode_wren_en4b_ex4b(struct spi_nor *nor,
+					       bool enable);
+int spi_nor_set_4byte_addr_mode_brwr(struct spi_nor *nor, bool enable);
+int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
+int spi_nor_wait_till_ready(struct spi_nor *nor);
+int spi_nor_global_block_unlock(struct spi_nor *nor);
+int spi_nor_prep_and_lock(struct spi_nor *nor);
+void spi_nor_unlock_and_unprep(struct spi_nor *nor);
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor);
+int spi_nor_read_id(struct spi_nor *nor, u8 naddr, u8 ndummy, u8 *id,
+		    enum spi_nor_protocol reg_proto);
+int spi_nor_read_sr(struct spi_nor *nor, u8 *sr);
+int spi_nor_sr_ready(struct spi_nor *nor);
+int spi_nor_read_cr(struct spi_nor *nor, u8 *cr);
+int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len);
+int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1);
+int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr);
+
+ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
+			  u8 *buf);
+ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
+			   const u8 *buf);
+int spi_nor_read_any_reg(struct spi_nor *nor, struct spi_mem_op *op,
+			 enum spi_nor_protocol proto);
+int spi_nor_write_any_volatile_reg(struct spi_nor *nor, struct spi_mem_op *op,
+				   enum spi_nor_protocol proto);
+int spi_nor_erase_sector(struct spi_nor *nor, u32 addr);
+
+int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf);
+int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
+			   const u8 *buf);
+int spi_nor_otp_erase_secr(struct spi_nor *nor, loff_t addr);
+int spi_nor_otp_lock_sr2(struct spi_nor *nor, unsigned int region);
+int spi_nor_otp_is_locked_sr2(struct spi_nor *nor, unsigned int region);
+
+int spi_nor_hwcaps_read2cmd(u32 hwcaps);
+int spi_nor_hwcaps_pp2cmd(u32 hwcaps);
+u8 spi_nor_convert_3to4_read(u8 opcode);
+void spi_nor_set_read_settings(struct spi_nor_read_command *read,
+			       u8 num_mode_clocks,
+			       u8 num_wait_states,
+			       u8 opcode,
+			       enum spi_nor_protocol proto);
+void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode,
+			     enum spi_nor_protocol proto);
+
+void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
+			    u8 opcode);
+void spi_nor_mask_erase_type(struct spi_nor_erase_type *erase);
+struct spi_nor_erase_region *
+spi_nor_region_next(struct spi_nor_erase_region *region);
+void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
+				    u8 erase_mask, u64 flash_size);
+
+int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
+			     const struct sfdp_parameter_header *bfpt_header,
+			     const struct sfdp_bfpt *bfpt);
+
+void spi_nor_init_default_locking_ops(struct spi_nor *nor);
+void spi_nor_try_unlock_all(struct spi_nor *nor);
+void spi_nor_set_mtd_locking_ops(struct spi_nor *nor);
+void spi_nor_set_mtd_otp_ops(struct spi_nor *nor);
+
+int spi_nor_controller_ops_read_reg(struct spi_nor *nor, u8 opcode,
+				    u8 *buf, size_t len);
+int spi_nor_controller_ops_write_reg(struct spi_nor *nor, u8 opcode,
+				     const u8 *buf, size_t len);
+
+int spi_nor_check_sfdp_signature(struct spi_nor *nor);
+int spi_nor_parse_sfdp(struct spi_nor *nor);
+
+static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
+{
+	return container_of(mtd, struct spi_nor, mtd);
+}
+
+#ifdef CONFIG_DEBUG_FS
+void spi_nor_debugfs_register(struct spi_nor *nor);
+void spi_nor_debugfs_shutdown(void);
+#else
+static inline void spi_nor_debugfs_register(struct spi_nor *nor) {}
+static inline void spi_nor_debugfs_shutdown(void) {}
+#endif
+
+#endif /* __LINUX_MTD_SPI_NOR_INTERNAL_H */
diff --git a/drivers/mtd/spi-nor/debugfs.c b/drivers/mtd/spi-nor/debugfs.c
new file mode 100644
index 0000000000..6e163cb5b4
--- /dev/null
+++ b/drivers/mtd/spi-nor/debugfs.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/debugfs.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#include "core.h"
+
+#define SPI_NOR_DEBUGFS_ROOT "spi-nor"
+
+#define SNOR_F_NAME(name) [ilog2(SNOR_F_##name)] = #name
+static const char *const snor_f_names[] = {
+	SNOR_F_NAME(HAS_SR_TB),
+	SNOR_F_NAME(NO_OP_CHIP_ERASE),
+	SNOR_F_NAME(BROKEN_RESET),
+	SNOR_F_NAME(4B_OPCODES),
+	SNOR_F_NAME(HAS_4BAIT),
+	SNOR_F_NAME(HAS_LOCK),
+	SNOR_F_NAME(HAS_16BIT_SR),
+	SNOR_F_NAME(NO_READ_CR),
+	SNOR_F_NAME(HAS_SR_TB_BIT6),
+	SNOR_F_NAME(HAS_4BIT_BP),
+	SNOR_F_NAME(HAS_SR_BP3_BIT6),
+	SNOR_F_NAME(IO_MODE_EN_VOLATILE),
+	SNOR_F_NAME(SOFT_RESET),
+	SNOR_F_NAME(SWP_IS_VOLATILE),
+	SNOR_F_NAME(RWW),
+	SNOR_F_NAME(ECC),
+	SNOR_F_NAME(NO_WP),
+};
+#undef SNOR_F_NAME
+
+static const char *spi_nor_protocol_name(enum spi_nor_protocol proto)
+{
+	switch (proto) {
+	case SNOR_PROTO_1_1_1:     return "1S-1S-1S";
+	case SNOR_PROTO_1_1_2:     return "1S-1S-2S";
+	case SNOR_PROTO_1_1_4:     return "1S-1S-4S";
+	case SNOR_PROTO_1_1_8:     return "1S-1S-8S";
+	case SNOR_PROTO_1_2_2:     return "1S-2S-2S";
+	case SNOR_PROTO_1_4_4:     return "1S-4S-4S";
+	case SNOR_PROTO_1_8_8:     return "1S-8S-8S";
+	case SNOR_PROTO_2_2_2:     return "2S-2S-2S";
+	case SNOR_PROTO_4_4_4:     return "4S-4S-4S";
+	case SNOR_PROTO_8_8_8:     return "8S-8S-8S";
+	case SNOR_PROTO_1_1_1_DTR: return "1D-1D-1D";
+	case SNOR_PROTO_1_2_2_DTR: return "1D-2D-2D";
+	case SNOR_PROTO_1_4_4_DTR: return "1D-4D-4D";
+	case SNOR_PROTO_1_8_8_DTR: return "1D-8D-8D";
+	case SNOR_PROTO_8_8_8_DTR: return "8D-8D-8D";
+	}
+
+	return "<unknown>";
+}
+
+static void spi_nor_print_flags(struct seq_file *s, unsigned long flags,
+				const char *const *names, int names_len)
+{
+	bool sep = false;
+	int i;
+
+	for (i = 0; i < sizeof(flags) * BITS_PER_BYTE; i++) {
+		if (!(flags & BIT(i)))
+			continue;
+		if (sep)
+			seq_puts(s, " | ");
+		sep = true;
+		if (i < names_len && names[i])
+			seq_puts(s, names[i]);
+		else
+			seq_printf(s, "1<<%d", i);
+	}
+}
+
+static int spi_nor_params_show(struct seq_file *s, void *data)
+{
+	struct spi_nor *nor = s->private;
+	struct spi_nor_flash_parameter *params = nor->params;
+	struct spi_nor_erase_map *erase_map = &params->erase_map;
+	struct spi_nor_erase_region *region;
+	const struct flash_info *info = nor->info;
+	char buf[16], *str;
+	int i;
+
+	seq_printf(s, "name\t\t%s\n", info->name);
+	seq_printf(s, "id\t\t%*ph\n", SPI_NOR_MAX_ID_LEN, nor->id);
+	string_get_size(params->size, 1, STRING_UNITS_2, buf, sizeof(buf));
+	seq_printf(s, "size\t\t%s\n", buf);
+	seq_printf(s, "write size\t%u\n", params->writesize);
+	seq_printf(s, "page size\t%u\n", params->page_size);
+	seq_printf(s, "address nbytes\t%u\n", nor->addr_nbytes);
+
+	seq_puts(s, "flags\t\t");
+	spi_nor_print_flags(s, nor->flags, snor_f_names, sizeof(snor_f_names));
+	seq_puts(s, "\n");
+
+	seq_puts(s, "\nopcodes\n");
+	seq_printf(s, " read\t\t0x%02x\n", nor->read_opcode);
+	seq_printf(s, "  dummy cycles\t%u\n", nor->read_dummy);
+	seq_printf(s, " erase\t\t0x%02x\n", nor->erase_opcode);
+	seq_printf(s, " program\t0x%02x\n", nor->program_opcode);
+
+	switch (nor->cmd_ext_type) {
+	case SPI_NOR_EXT_NONE:
+		str = "none";
+		break;
+	case SPI_NOR_EXT_REPEAT:
+		str = "repeat";
+		break;
+	case SPI_NOR_EXT_INVERT:
+		str = "invert";
+		break;
+	default:
+		str = "<unknown>";
+		break;
+	}
+	seq_printf(s, " 8D extension\t%s\n", str);
+
+	seq_puts(s, "\nprotocols\n");
+	seq_printf(s, " read\t\t%s\n",
+		   spi_nor_protocol_name(nor->read_proto));
+	seq_printf(s, " write\t\t%s\n",
+		   spi_nor_protocol_name(nor->write_proto));
+	seq_printf(s, " register\t%s\n",
+		   spi_nor_protocol_name(nor->reg_proto));
+
+	seq_puts(s, "\nerase commands\n");
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+		struct spi_nor_erase_type *et = &erase_map->erase_type[i];
+
+		if (et->size) {
+			string_get_size(et->size, 1, STRING_UNITS_2, buf,
+					sizeof(buf));
+			seq_printf(s, " %02x (%s) [%d]\n", et->opcode, buf, i);
+		}
+	}
+
+	if (!(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
+		string_get_size(params->size, 1, STRING_UNITS_2, buf, sizeof(buf));
+		seq_printf(s, " %02x (%s)\n", SPINOR_OP_CHIP_ERASE, buf);
+	}
+
+	seq_puts(s, "\nsector map\n");
+	seq_puts(s, " region (in hex)   | erase mask | flags\n");
+	seq_puts(s, " ------------------+------------+----------\n");
+	for (region = erase_map->regions;
+	     region;
+	     region = spi_nor_region_next(region)) {
+		u64 start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
+		u64 flags = region->offset & SNOR_ERASE_FLAGS_MASK;
+		u64 end = start + region->size - 1;
+
+		seq_printf(s, " %08llx-%08llx |     [%c%c%c%c] | %s\n",
+			   start, end,
+			   flags & BIT(0) ? '0' : ' ',
+			   flags & BIT(1) ? '1' : ' ',
+			   flags & BIT(2) ? '2' : ' ',
+			   flags & BIT(3) ? '3' : ' ',
+			   flags & SNOR_OVERLAID_REGION ? "overlaid" : "");
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(spi_nor_params);
+
+static void spi_nor_print_read_cmd(struct seq_file *s, u32 cap,
+				   struct spi_nor_read_command *cmd)
+{
+	seq_printf(s, " %s%s\n", spi_nor_protocol_name(cmd->proto),
+		   cap == SNOR_HWCAPS_READ_FAST ? " (fast read)" : "");
+	seq_printf(s, "  opcode\t0x%02x\n", cmd->opcode);
+	seq_printf(s, "  mode cycles\t%u\n", cmd->num_mode_clocks);
+	seq_printf(s, "  dummy cycles\t%u\n", cmd->num_wait_states);
+}
+
+static void spi_nor_print_pp_cmd(struct seq_file *s,
+				 struct spi_nor_pp_command *cmd)
+{
+	seq_printf(s, " %s\n", spi_nor_protocol_name(cmd->proto));
+	seq_printf(s, "  opcode\t0x%02x\n", cmd->opcode);
+}
+
+static int spi_nor_capabilities_show(struct seq_file *s, void *data)
+{
+	struct spi_nor *nor = s->private;
+	struct spi_nor_flash_parameter *params = nor->params;
+	u32 hwcaps = params->hwcaps.mask;
+	int i, cmd;
+
+	seq_puts(s, "Supported read modes by the flash\n");
+	for (i = 0; i < sizeof(hwcaps) * BITS_PER_BYTE; i++) {
+		if (!(hwcaps & BIT(i)))
+			continue;
+
+		cmd = spi_nor_hwcaps_read2cmd(BIT(i));
+		if (cmd < 0)
+			continue;
+
+		spi_nor_print_read_cmd(s, BIT(i), &params->reads[cmd]);
+		hwcaps &= ~BIT(i);
+	}
+
+	seq_puts(s, "\nSupported page program modes by the flash\n");
+	for (i = 0; i < sizeof(hwcaps) * BITS_PER_BYTE; i++) {
+		if (!(hwcaps & BIT(i)))
+			continue;
+
+		cmd = spi_nor_hwcaps_pp2cmd(BIT(i));
+		if (cmd < 0)
+			continue;
+
+		spi_nor_print_pp_cmd(s, &params->page_programs[cmd]);
+		hwcaps &= ~BIT(i);
+	}
+
+	if (hwcaps)
+		seq_printf(s, "\nunknown hwcaps 0x%x\n", hwcaps);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(spi_nor_capabilities);
+
+static void spi_nor_debugfs_unregister(void *data)
+{
+	struct spi_nor *nor = data;
+
+	debugfs_remove(nor->debugfs_root);
+	nor->debugfs_root = NULL;
+}
+
+static struct dentry *rootdir;
+
+void spi_nor_debugfs_register(struct spi_nor *nor)
+{
+	struct dentry *d;
+	int ret;
+
+	if (!rootdir)
+		rootdir = debugfs_create_dir(SPI_NOR_DEBUGFS_ROOT, NULL);
+
+	ret = devm_add_action(nor->dev, spi_nor_debugfs_unregister, nor);
+	if (ret)
+		return;
+
+	d = debugfs_create_dir(dev_name(nor->dev), rootdir);
+	nor->debugfs_root = d;
+
+	debugfs_create_file("params", 0444, d, nor, &spi_nor_params_fops);
+	debugfs_create_file("capabilities", 0444, d, nor,
+			    &spi_nor_capabilities_fops);
+}
+
+void spi_nor_debugfs_shutdown(void)
+{
+	debugfs_remove(rootdir);
+}
diff --git a/drivers/mtd/spi-nor/eon.c b/drivers/mtd/spi-nor/eon.c
new file mode 100644
index 0000000000..50a1105371
--- /dev/null
+++ b/drivers/mtd/spi-nor/eon.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info eon_nor_parts[] = {
+	/* EON -- en25xxx */
+	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64) },
+	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64) },
+	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128) },
+	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "en25q80a",   INFO(0x1c3014, 0, 64 * 1024,   16)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "en25qh16",   INFO(0x1c7015, 0, 64 * 1024,   32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64) },
+	{ "en25qh64",   INFO(0x1c7017, 0, 64 * 1024,  128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256) },
+	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512)
+		PARSE_SFDP },
+	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128)
+		NO_SFDP_FLAGS(SECT_4K) },
+};
+
+const struct spi_nor_manufacturer spi_nor_eon = {
+	.name = "eon",
+	.parts = eon_nor_parts,
+	.nparts = ARRAY_SIZE(eon_nor_parts),
+};
diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c
new file mode 100644
index 0000000000..fcc3b0e7cd
--- /dev/null
+++ b/drivers/mtd/spi-nor/esmt.c
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info esmt_nor_parts[] = {
+	/* ESMT */
+	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "f25l32qa-2s", INFO(0x8c4116, 0, 64 * 1024, 64)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K) },
+};
+
+const struct spi_nor_manufacturer spi_nor_esmt = {
+	.name = "esmt",
+	.parts = esmt_nor_parts,
+	.nparts = ARRAY_SIZE(esmt_nor_parts),
+};
diff --git a/drivers/mtd/spi-nor/everspin.c b/drivers/mtd/spi-nor/everspin.c
new file mode 100644
index 0000000000..84a07c2e05
--- /dev/null
+++ b/drivers/mtd/spi-nor/everspin.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info everspin_nor_parts[] = {
+	/* Everspin */
+	{ "mr25h128", CAT25_INFO(16 * 1024, 1, 256, 2) },
+	{ "mr25h256", CAT25_INFO(32 * 1024, 1, 256, 2) },
+	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3) },
+	{ "mr25h40",  CAT25_INFO(512 * 1024, 1, 256, 3) },
+};
+
+const struct spi_nor_manufacturer spi_nor_everspin = {
+	.name = "everspin",
+	.parts = everspin_nor_parts,
+	.nparts = ARRAY_SIZE(everspin_nor_parts),
+};
diff --git a/drivers/mtd/spi-nor/fujitsu.c b/drivers/mtd/spi-nor/fujitsu.c
new file mode 100644
index 0000000000..69cffc5c73
--- /dev/null
+++ b/drivers/mtd/spi-nor/fujitsu.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info fujitsu_nor_parts[] = {
+	/* Fujitsu */
+	{ "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1)
+		FLAGS(SPI_NOR_NO_ERASE) },
+};
+
+const struct spi_nor_manufacturer spi_nor_fujitsu = {
+	.name = "fujitsu",
+	.parts = fujitsu_nor_parts,
+	.nparts = ARRAY_SIZE(fujitsu_nor_parts),
+};
diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
new file mode 100644
index 0000000000..d57ddaf152
--- /dev/null
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static int
+gd25q256_post_bfpt(struct spi_nor *nor,
+		   const struct sfdp_parameter_header *bfpt_header,
+		   const struct sfdp_bfpt *bfpt)
+{
+	/*
+	 * GD25Q256C supports the first version of JESD216 which does not define
+	 * the Quad Enable methods. Overwrite the default Quad Enable method.
+	 *
+	 * GD25Q256 GENERATION | SFDP MAJOR VERSION | SFDP MINOR VERSION
+	 *      GD25Q256C      | SFDP_JESD216_MAJOR | SFDP_JESD216_MINOR
+	 *      GD25Q256D      | SFDP_JESD216_MAJOR | SFDP_JESD216B_MINOR
+	 *      GD25Q256E      | SFDP_JESD216_MAJOR | SFDP_JESD216B_MINOR
+	 */
+	if (bfpt_header->major == SFDP_JESD216_MAJOR &&
+	    bfpt_header->minor == SFDP_JESD216_MINOR)
+		nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups gd25q256_fixups = {
+	.post_bfpt = gd25q256_post_bfpt,
+};
+
+static const struct flash_info gigadevice_nor_parts[] = {
+	{ "gd25q16", INFO(0xc84015, 0, 64 * 1024,  32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512)
+		PARSE_SFDP
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
+		.fixups = &gd25q256_fixups },
+};
+
+const struct spi_nor_manufacturer spi_nor_gigadevice = {
+	.name = "gigadevice",
+	.parts = gigadevice_nor_parts,
+	.nparts = ARRAY_SIZE(gigadevice_nor_parts),
+};
diff --git a/drivers/mtd/spi-nor/intel.c b/drivers/mtd/spi-nor/intel.c
new file mode 100644
index 0000000000..9179f2d09c
--- /dev/null
+++ b/drivers/mtd/spi-nor/intel.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info intel_nor_parts[] = {
+	/* Intel/Numonyx -- xxxs33b */
+	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+};
+
+const struct spi_nor_manufacturer spi_nor_intel = {
+	.name = "intel",
+	.parts = intel_nor_parts,
+	.nparts = ARRAY_SIZE(intel_nor_parts),
+};
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
new file mode 100644
index 0000000000..accdf7aa2b
--- /dev/null
+++ b/drivers/mtd/spi-nor/issi.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static int
+is25lp256_post_bfpt_fixups(struct spi_nor *nor,
+			   const struct sfdp_parameter_header *bfpt_header,
+			   const struct sfdp_bfpt *bfpt)
+{
+	/*
+	 * IS25LP256 supports 4B opcodes, but the BFPT advertises
+	 * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY.
+	 * Overwrite the number of address bytes advertised by the BFPT.
+	 */
+	if ((bfpt->dwords[SFDP_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) ==
+		BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
+		nor->params->addr_nbytes = 4;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups is25lp256_fixups = {
+	.post_bfpt = is25lp256_post_bfpt_fixups,
+};
+
+static int pm25lv_nor_late_init(struct spi_nor *nor)
+{
+	struct spi_nor_erase_map *map = &nor->params->erase_map;
+	int i;
+
+	/* The PM25LV series has a different 4k sector erase opcode */
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+		if (map->erase_type[i].size == 4096)
+			map->erase_type[i].opcode = SPINOR_OP_BE_4K_PMC;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups pm25lv_nor_fixups = {
+	.late_init = pm25lv_nor_late_init,
+};
+
+static const struct flash_info issi_nor_parts[] = {
+	/* ISSI */
+	{ "is25cd512",  INFO(0x7f9d20, 0, 32 * 1024,   2)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "is25lq040b", INFO(0x9d4013, 0, 64 * 1024,   8)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25lp016d", INFO(0x9d6015, 0, 64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25lp080d", INFO(0x9d6014, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25lp032",  INFO(0x9d6016, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "is25lp064",  INFO(0x9d6017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "is25lp128",  INFO(0x9d6018, 0, 64 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "is25lp256",  INFO(0x9d6019, 0, 64 * 1024, 512)
+		PARSE_SFDP
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
+		.fixups = &is25lp256_fixups },
+	{ "is25wp032",  INFO(0x9d7016, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25wp064",  INFO(0x9d7017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25wp256", INFO(0x9d7019, 0, 0, 0)
+		PARSE_SFDP
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
+		FLAGS(SPI_NOR_QUAD_PP)
+		.fixups = &is25lp256_fixups },
+
+	/* PMC */
+	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &pm25lv_nor_fixups
+	},
+	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &pm25lv_nor_fixups
+	},
+	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64)
+		NO_SFDP_FLAGS(SECT_4K) },
+};
+
+static void issi_nor_default_init(struct spi_nor *nor)
+{
+	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+}
+
+static const struct spi_nor_fixups issi_fixups = {
+	.default_init = issi_nor_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_issi = {
+	.name = "issi",
+	.parts = issi_nor_parts,
+	.nparts = ARRAY_SIZE(issi_nor_parts),
+	.fixups = &issi_fixups,
+};
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
new file mode 100644
index 0000000000..eb149e517c
--- /dev/null
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static int
+mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
+			    const struct sfdp_parameter_header *bfpt_header,
+			    const struct sfdp_bfpt *bfpt)
+{
+	/*
+	 * MX25L25635F supports 4B opcodes but MX25L25635E does not.
+	 * Unfortunately, Macronix has re-used the same JEDEC ID for both
+	 * variants which prevents us from defining a new entry in the parts
+	 * table.
+	 * We need a way to differentiate MX25L25635E and MX25L25635F, and it
+	 * seems that the F version advertises support for Fast Read 4-4-4 in
+	 * its BFPT table.
+	 */
+	if (bfpt->dwords[SFDP_DWORD(5)] & BFPT_DWORD5_FAST_READ_4_4_4)
+		nor->flags |= SNOR_F_4B_OPCODES;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups mx25l25635_fixups = {
+	.post_bfpt = mx25l25635_post_bfpt_fixups,
+};
+
+static const struct flash_info macronix_nor_parts[] = {
+	/* Macronix */
+	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16) },
+	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256) },
+	{ "mx25r1635f",  INFO(0xc22815, 0, 64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25r3235f",  INFO(0xc22816, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		.fixups = &mx25l25635_fixups },
+	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "mx25uw51245g", INFOB(0xc2813a, 0, 0, 0, 4)
+		PARSE_SFDP
+		FLAGS(SPI_NOR_RWW) },
+	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512) },
+	{ "mx66l51235f", INFO(0xc2201a, 0, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048)
+		NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+	{ "mx66u2g45g",	 INFO(0xc2253c, 0, 64 * 1024, 4096)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+};
+
+static void macronix_nor_default_init(struct spi_nor *nor)
+{
+	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+}
+
+static int macronix_nor_late_init(struct spi_nor *nor)
+{
+	if (!nor->params->set_4byte_addr_mode)
+		nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode_en4b_ex4b;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups macronix_nor_fixups = {
+	.default_init = macronix_nor_default_init,
+	.late_init = macronix_nor_late_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_macronix = {
+	.name = "macronix",
+	.parts = macronix_nor_parts,
+	.nparts = ARRAY_SIZE(macronix_nor_parts),
+	.fixups = &macronix_nor_fixups,
+};
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
new file mode 100644
index 0000000000..6ad080c52a
--- /dev/null
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -0,0 +1,462 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+/* flash_info mfr_flag. Used to read proprietary FSR register. */
+#define USE_FSR		BIT(0)
+
+#define SPINOR_OP_RDFSR		0x70	/* Read flag status register */
+#define SPINOR_OP_CLFSR		0x50	/* Clear flag status register */
+#define SPINOR_OP_MT_DTR_RD	0xfd	/* Fast Read opcode in DTR mode */
+#define SPINOR_OP_MT_RD_ANY_REG	0x85	/* Read volatile register */
+#define SPINOR_OP_MT_WR_ANY_REG	0x81	/* Write volatile register */
+#define SPINOR_REG_MT_CFR0V	0x00	/* For setting octal DTR mode */
+#define SPINOR_REG_MT_CFR1V	0x01	/* For setting dummy cycles */
+#define SPINOR_REG_MT_CFR1V_DEF	0x1f	/* Default dummy cycles */
+#define SPINOR_MT_OCT_DTR	0xe7	/* Enable Octal DTR. */
+#define SPINOR_MT_EXSPI		0xff	/* Enable Extended SPI (default) */
+
+/* Flag Status Register bits */
+#define FSR_READY		BIT(7)	/* Device status, 0 = Busy, 1 = Ready */
+#define FSR_E_ERR		BIT(5)	/* Erase operation status */
+#define FSR_P_ERR		BIT(4)	/* Program operation status */
+#define FSR_PT_ERR		BIT(1)	/* Protection error bit */
+
+/* Micron ST SPI NOR flash operations. */
+#define MICRON_ST_NOR_WR_ANY_REG_OP(naddr, addr, ndata, buf)		\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_MT_WR_ANY_REG, 0),		\
+		   SPI_MEM_OP_ADDR(naddr, addr, 0),			\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(ndata, buf, 0))
+
+#define MICRON_ST_RDFSR_OP(buf)						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_IN(1, buf, 0))
+
+#define MICRON_ST_CLFSR_OP						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+static int micron_st_nor_octal_dtr_en(struct spi_nor *nor)
+{
+	struct spi_mem_op op;
+	u8 *buf = nor->bouncebuf;
+	int ret;
+	u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;
+
+	/* Use 20 dummy cycles for memory array reads. */
+	*buf = 20;
+	op = (struct spi_mem_op)
+		MICRON_ST_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
+					    SPINOR_REG_MT_CFR1V, 1, buf);
+	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	buf[0] = SPINOR_MT_OCT_DTR;
+	op = (struct spi_mem_op)
+		MICRON_ST_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
+					    SPINOR_REG_MT_CFR0V, 1, buf);
+	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	/* Read flash ID to make sure the switch was successful. */
+	ret = spi_nor_read_id(nor, 0, 8, buf, SNOR_PROTO_8_8_8_DTR);
+	if (ret) {
+		dev_dbg(nor->dev, "error %d reading JEDEC ID after enabling 8D-8D-8D mode\n", ret);
+		return ret;
+	}
+
+	if (memcmp(buf, nor->info->id, nor->info->id_len))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int micron_st_nor_octal_dtr_dis(struct spi_nor *nor)
+{
+	struct spi_mem_op op;
+	u8 *buf = nor->bouncebuf;
+	int ret;
+
+	/*
+	 * The register is 1-byte wide, but 1-byte transactions are not allowed
+	 * in 8D-8D-8D mode. The next register is the dummy cycle configuration
+	 * register. Since the transaction needs to be at least 2 bytes wide,
+	 * set the next register to its default value. This also makes sense
+	 * because the value was changed when enabling 8D-8D-8D mode, it should
+	 * be reset when disabling.
+	 */
+	buf[0] = SPINOR_MT_EXSPI;
+	buf[1] = SPINOR_REG_MT_CFR1V_DEF;
+	op = (struct spi_mem_op)
+		MICRON_ST_NOR_WR_ANY_REG_OP(nor->addr_nbytes,
+					    SPINOR_REG_MT_CFR0V, 2, buf);
+	ret = spi_nor_write_any_volatile_reg(nor, &op, SNOR_PROTO_8_8_8_DTR);
+	if (ret)
+		return ret;
+
+	/* Read flash ID to make sure the switch was successful. */
+	ret = spi_nor_read_id(nor, 0, 0, buf, SNOR_PROTO_1_1_1);
+	if (ret) {
+		dev_dbg(nor->dev, "error %d reading JEDEC ID after disabling 8D-8D-8D mode\n", ret);
+		return ret;
+	}
+
+	if (memcmp(buf, nor->info->id, nor->info->id_len))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int micron_st_nor_set_octal_dtr(struct spi_nor *nor, bool enable)
+{
+	return enable ? micron_st_nor_octal_dtr_en(nor) :
+			micron_st_nor_octal_dtr_dis(nor);
+}
+
+static void mt35xu512aba_default_init(struct spi_nor *nor)
+{
+	nor->params->set_octal_dtr = micron_st_nor_set_octal_dtr;
+}
+
+static int mt35xu512aba_post_sfdp_fixup(struct spi_nor *nor)
+{
+	/* Set the Fast Read settings. */
+	nor->params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR;
+	spi_nor_set_read_settings(&nor->params->reads[SNOR_CMD_READ_8_8_8_DTR],
+				  0, 20, SPINOR_OP_MT_DTR_RD,
+				  SNOR_PROTO_8_8_8_DTR);
+
+	nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
+	nor->params->rdsr_dummy = 8;
+	nor->params->rdsr_addr_nbytes = 0;
+
+	/*
+	 * The BFPT quad enable field is set to a reserved value so the quad
+	 * enable function is ignored by spi_nor_parse_bfpt(). Make sure we
+	 * disable it.
+	 */
+	nor->params->quad_enable = NULL;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups mt35xu512aba_fixups = {
+	.default_init = mt35xu512aba_default_init,
+	.post_sfdp = mt35xu512aba_post_sfdp_fixup,
+};
+
+static const struct flash_info micron_nor_parts[] = {
+	{ "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ |
+			   SPI_NOR_OCTAL_DTR_READ | SPI_NOR_OCTAL_DTR_PP)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES | SPI_NOR_IO_MODE_EN_VOLATILE)
+		MFR_FLAGS(USE_FSR)
+		.fixups = &mt35xu512aba_fixups
+	},
+	{ "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
+		MFR_FLAGS(USE_FSR)
+	},
+};
+
+static const struct flash_info st_nor_parts[] = {
+	{ "n25q016a",	 INFO(0x20bb15, 0, 64 * 1024,   32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64)
+		NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+	{ "n25q032a",	 INFO(0x20bb16, 0, 64 * 1024,   64)
+		NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "mt25ql256a",  INFO6(0x20ba19, 0x104400, 64 * 1024,  512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "mt25qu256a",  INFO6(0x20bb19, 0x104400, 64 * 1024,  512)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "mt25ql512a",  INFO6(0x20ba20, 0x104400, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "mt25qu512a",  INFO6(0x20bb20, 0x104400, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6 | NO_CHIP_ERASE)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048)
+		FLAGS(NO_CHIP_ERASE)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "mt25ql02g",   INFO(0x20ba22, 0, 64 * 1024, 4096)
+		FLAGS(NO_CHIP_ERASE)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_FSR)
+	},
+	{ "mt25qu02g",   INFO(0x20bb22, 0, 64 * 1024, 4096)
+		FLAGS(NO_CHIP_ERASE)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_FSR)
+	},
+
+	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2) },
+	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4) },
+	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4) },
+	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8) },
+	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16) },
+	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32) },
+	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64) },
+	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128) },
+	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64) },
+
+	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2) },
+	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4) },
+	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4) },
+	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8) },
+	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16) },
+	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32) },
+	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64) },
+	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128) },
+	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64) },
+
+	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2) },
+	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16) },
+	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32) },
+
+	{ "m25pe20", INFO(0x208012,  0, 64 * 1024,  4) },
+	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16) },
+	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32)
+		NO_SFDP_FLAGS(SECT_4K) },
+
+	{ "m25px16",    INFO(0x207115,  0, 64 * 1024, 32)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "m25px32",    INFO(0x207116,  0, 64 * 1024, 64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128) },
+	{ "m25px80",    INFO(0x207114,  0, 64 * 1024, 16) },
+};
+
+/**
+ * micron_st_nor_read_fsr() - Read the Flag Status Register.
+ * @nor:	pointer to 'struct spi_nor'
+ * @fsr:	pointer to a DMA-able buffer where the value of the
+ *              Flag Status Register will be written. Should be at least 2
+ *              bytes.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int micron_st_nor_read_fsr(struct spi_nor *nor, u8 *fsr)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = MICRON_ST_RDFSR_OP(fsr);
+
+		if (nor->reg_proto == SNOR_PROTO_8_8_8_DTR) {
+			op.addr.nbytes = nor->params->rdsr_addr_nbytes;
+			op.dummy.nbytes = nor->params->rdsr_dummy;
+			/*
+			 * We don't want to read only one byte in DTR mode. So,
+			 * read 2 and then discard the second byte.
+			 */
+			op.data.nbytes = 2;
+		}
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_RDFSR, fsr,
+						      1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d reading FSR\n", ret);
+
+	return ret;
+}
+
+/**
+ * micron_st_nor_clear_fsr() - Clear the Flag Status Register.
+ * @nor:	pointer to 'struct spi_nor'.
+ */
+static void micron_st_nor_clear_fsr(struct spi_nor *nor)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = MICRON_ST_CLFSR_OP;
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_CLFSR,
+						       NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d clearing FSR\n", ret);
+}
+
+/**
+ * micron_st_nor_ready() - Query the Status Register as well as the Flag Status
+ * Register to see if the flash is ready for new commands. If there are any
+ * errors in the FSR clear them.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
+ */
+static int micron_st_nor_ready(struct spi_nor *nor)
+{
+	int sr_ready, ret;
+
+	sr_ready = spi_nor_sr_ready(nor);
+	if (sr_ready < 0)
+		return sr_ready;
+
+	ret = micron_st_nor_read_fsr(nor, nor->bouncebuf);
+	if (ret) {
+		/*
+		 * Some controllers, such as Intel SPI, do not support low
+		 * level operations such as reading the flag status
+		 * register. They only expose small amount of high level
+		 * operations to the software. If this is the case we use
+		 * only the status register value.
+		 */
+		return ret == -EOPNOTSUPP ? sr_ready : ret;
+	}
+
+	if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
+		if (nor->bouncebuf[0] & FSR_E_ERR)
+			dev_err(nor->dev, "Erase operation failed.\n");
+		else
+			dev_err(nor->dev, "Program operation failed.\n");
+
+		if (nor->bouncebuf[0] & FSR_PT_ERR)
+			dev_err(nor->dev,
+				"Attempted to modify a protected sector.\n");
+
+		micron_st_nor_clear_fsr(nor);
+
+		/*
+		 * WEL bit remains set to one when an erase or page program
+		 * error occurs. Issue a Write Disable command to protect
+		 * against inadvertent writes that can possibly corrupt the
+		 * contents of the memory.
+		 */
+		ret = spi_nor_write_disable(nor);
+		if (ret)
+			return ret;
+
+		return -EIO;
+	}
+
+	return sr_ready && !!(nor->bouncebuf[0] & FSR_READY);
+}
+
+static void micron_st_nor_default_init(struct spi_nor *nor)
+{
+	nor->flags |= SNOR_F_HAS_LOCK;
+	nor->flags &= ~SNOR_F_HAS_16BIT_SR;
+	nor->params->quad_enable = NULL;
+}
+
+static int micron_st_nor_late_init(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+
+	if (nor->info->mfr_flags & USE_FSR)
+		params->ready = micron_st_nor_ready;
+
+	if (!params->set_4byte_addr_mode)
+		params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode_wren_en4b_ex4b;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups micron_st_nor_fixups = {
+	.default_init = micron_st_nor_default_init,
+	.late_init = micron_st_nor_late_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_micron = {
+	.name = "micron",
+	.parts = micron_nor_parts,
+	.nparts = ARRAY_SIZE(micron_nor_parts),
+	.fixups = &micron_st_nor_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_st = {
+	.name = "st",
+	.parts = st_nor_parts,
+	.nparts = ARRAY_SIZE(st_nor_parts),
+	.fixups = &micron_st_nor_fixups,
+};
diff --git a/drivers/mtd/spi-nor/otp.c b/drivers/mtd/spi-nor/otp.c
new file mode 100644
index 0000000000..9a729aa345
--- /dev/null
+++ b/drivers/mtd/spi-nor/otp.c
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OTP support for SPI NOR flashes
+ *
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ */
+
+#include <linux/log2.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+#define spi_nor_otp_region_len(nor) ((nor)->params->otp.org->len)
+#define spi_nor_otp_n_regions(nor) ((nor)->params->otp.org->n_regions)
+
+/**
+ * spi_nor_otp_read_secr() - read security register
+ * @nor:	pointer to 'struct spi_nor'
+ * @addr:       offset to read from
+ * @len:        number of bytes to read
+ * @buf:        pointer to dst buffer
+ *
+ * Read a security register by using the SPINOR_OP_RSECR commands.
+ *
+ * In Winbond/GigaDevice datasheets the term "security register" stands for
+ * an one-time-programmable memory area, consisting of multiple bytes (usually
+ * 256). Thus one "security register" maps to one OTP region.
+ *
+ * This method is used on GigaDevice and Winbond flashes.
+ *
+ * Please note, the read must not span multiple registers.
+ *
+ * Return: number of bytes read successfully, -errno otherwise
+ */
+int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf)
+{
+	u8 addr_nbytes, read_opcode, read_dummy;
+	struct spi_mem_dirmap_desc *rdesc;
+	enum spi_nor_protocol read_proto;
+	int ret;
+
+	read_opcode = nor->read_opcode;
+	addr_nbytes = nor->addr_nbytes;
+	read_dummy = nor->read_dummy;
+	read_proto = nor->read_proto;
+	rdesc = nor->dirmap.rdesc;
+
+	nor->read_opcode = SPINOR_OP_RSECR;
+	nor->read_dummy = 8;
+	nor->read_proto = SNOR_PROTO_1_1_1;
+	nor->dirmap.rdesc = NULL;
+
+	ret = spi_nor_read_data(nor, addr, len, buf);
+
+	nor->read_opcode = read_opcode;
+	nor->addr_nbytes = addr_nbytes;
+	nor->read_dummy = read_dummy;
+	nor->read_proto = read_proto;
+	nor->dirmap.rdesc = rdesc;
+
+	return ret;
+}
+
+/**
+ * spi_nor_otp_write_secr() - write security register
+ * @nor:        pointer to 'struct spi_nor'
+ * @addr:       offset to write to
+ * @len:        number of bytes to write
+ * @buf:        pointer to src buffer
+ *
+ * Write a security register by using the SPINOR_OP_PSECR commands.
+ *
+ * For more information on the term "security register", see the documentation
+ * of spi_nor_otp_read_secr().
+ *
+ * This method is used on GigaDevice and Winbond flashes.
+ *
+ * Please note, the write must not span multiple registers.
+ *
+ * Return: number of bytes written successfully, -errno otherwise
+ */
+int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
+			   const u8 *buf)
+{
+	enum spi_nor_protocol write_proto;
+	struct spi_mem_dirmap_desc *wdesc;
+	u8 addr_nbytes, program_opcode;
+	int ret, written;
+
+	program_opcode = nor->program_opcode;
+	addr_nbytes = nor->addr_nbytes;
+	write_proto = nor->write_proto;
+	wdesc = nor->dirmap.wdesc;
+
+	nor->program_opcode = SPINOR_OP_PSECR;
+	nor->write_proto = SNOR_PROTO_1_1_1;
+	nor->dirmap.wdesc = NULL;
+
+	/*
+	 * We only support a write to one single page. For now all winbond
+	 * flashes only have one page per security register.
+	 */
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		goto out;
+
+	written = spi_nor_write_data(nor, addr, len, buf);
+	if (written < 0)
+		goto out;
+
+	ret = spi_nor_wait_till_ready(nor);
+
+out:
+	nor->program_opcode = program_opcode;
+	nor->addr_nbytes = addr_nbytes;
+	nor->write_proto = write_proto;
+	nor->dirmap.wdesc = wdesc;
+
+	return ret ?: written;
+}
+
+/**
+ * spi_nor_otp_erase_secr() - erase a security register
+ * @nor:        pointer to 'struct spi_nor'
+ * @addr:       offset of the security register to be erased
+ *
+ * Erase a security register by using the SPINOR_OP_ESECR command.
+ *
+ * For more information on the term "security register", see the documentation
+ * of spi_nor_otp_read_secr().
+ *
+ * This method is used on GigaDevice and Winbond flashes.
+ *
+ * Return: 0 on success, -errno otherwise
+ */
+int spi_nor_otp_erase_secr(struct spi_nor *nor, loff_t addr)
+{
+	u8 erase_opcode = nor->erase_opcode;
+	int ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	nor->erase_opcode = SPINOR_OP_ESECR;
+	ret = spi_nor_erase_sector(nor, addr);
+	nor->erase_opcode = erase_opcode;
+	if (ret)
+		return ret;
+
+	return spi_nor_wait_till_ready(nor);
+}
+
+static int spi_nor_otp_lock_bit_cr(unsigned int region)
+{
+	static const int lock_bits[] = { SR2_LB1, SR2_LB2, SR2_LB3 };
+
+	if (region >= ARRAY_SIZE(lock_bits))
+		return -EINVAL;
+
+	return lock_bits[region];
+}
+
+/**
+ * spi_nor_otp_lock_sr2() - lock the OTP region
+ * @nor:        pointer to 'struct spi_nor'
+ * @region:     OTP region
+ *
+ * Lock the OTP region by writing the status register-2. This method is used on
+ * GigaDevice and Winbond flashes.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_otp_lock_sr2(struct spi_nor *nor, unsigned int region)
+{
+	u8 *cr = nor->bouncebuf;
+	int ret, lock_bit;
+
+	lock_bit = spi_nor_otp_lock_bit_cr(region);
+	if (lock_bit < 0)
+		return lock_bit;
+
+	ret = spi_nor_read_cr(nor, cr);
+	if (ret)
+		return ret;
+
+	/* no need to write the register if region is already locked */
+	if (cr[0] & lock_bit)
+		return 0;
+
+	cr[0] |= lock_bit;
+
+	return spi_nor_write_16bit_cr_and_check(nor, cr[0]);
+}
+
+/**
+ * spi_nor_otp_is_locked_sr2() - get the OTP region lock status
+ * @nor:        pointer to 'struct spi_nor'
+ * @region:     OTP region
+ *
+ * Retrieve the OTP region lock bit by reading the status register-2. This
+ * method is used on GigaDevice and Winbond flashes.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_otp_is_locked_sr2(struct spi_nor *nor, unsigned int region)
+{
+	u8 *cr = nor->bouncebuf;
+	int ret, lock_bit;
+
+	lock_bit = spi_nor_otp_lock_bit_cr(region);
+	if (lock_bit < 0)
+		return lock_bit;
+
+	ret = spi_nor_read_cr(nor, cr);
+	if (ret)
+		return ret;
+
+	return cr[0] & lock_bit;
+}
+
+static loff_t spi_nor_otp_region_start(const struct spi_nor *nor, unsigned int region)
+{
+	const struct spi_nor_otp_organization *org = nor->params->otp.org;
+
+	return org->base + region * org->offset;
+}
+
+static size_t spi_nor_otp_size(struct spi_nor *nor)
+{
+	return spi_nor_otp_n_regions(nor) * spi_nor_otp_region_len(nor);
+}
+
+/* Translate the file offsets from and to OTP regions. */
+static loff_t spi_nor_otp_region_to_offset(struct spi_nor *nor, unsigned int region)
+{
+	return region * spi_nor_otp_region_len(nor);
+}
+
+static unsigned int spi_nor_otp_offset_to_region(struct spi_nor *nor, loff_t ofs)
+{
+	return div64_u64(ofs, spi_nor_otp_region_len(nor));
+}
+
+static int spi_nor_mtd_otp_info(struct mtd_info *mtd, size_t len,
+				size_t *retlen, struct otp_info *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	const struct spi_nor_otp_ops *ops = nor->params->otp.ops;
+	unsigned int n_regions = spi_nor_otp_n_regions(nor);
+	unsigned int i;
+	int ret, locked;
+
+	if (len < n_regions * sizeof(*buf))
+		return -ENOSPC;
+
+	ret = spi_nor_prep_and_lock(nor);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < n_regions; i++) {
+		buf->start = spi_nor_otp_region_to_offset(nor, i);
+		buf->length = spi_nor_otp_region_len(nor);
+
+		locked = ops->is_locked(nor, i);
+		if (locked < 0) {
+			ret = locked;
+			goto out;
+		}
+
+		buf->locked = !!locked;
+		buf++;
+	}
+
+	*retlen = n_regions * sizeof(*buf);
+
+out:
+	spi_nor_unlock_and_unprep(nor);
+
+	return ret;
+}
+
+static int spi_nor_mtd_otp_range_is_locked(struct spi_nor *nor, loff_t ofs,
+					   size_t len)
+{
+	const struct spi_nor_otp_ops *ops = nor->params->otp.ops;
+	unsigned int region;
+	int locked;
+
+	/*
+	 * If any of the affected OTP regions are locked the entire range is
+	 * considered locked.
+	 */
+	for (region = spi_nor_otp_offset_to_region(nor, ofs);
+	     region <= spi_nor_otp_offset_to_region(nor, ofs + len - 1);
+	     region++) {
+		locked = ops->is_locked(nor, region);
+		/* take the branch it is locked or in case of an error */
+		if (locked)
+			return locked;
+	}
+
+	return 0;
+}
+
+static int spi_nor_mtd_otp_read_write(struct mtd_info *mtd, loff_t ofs,
+				      size_t total_len, size_t *retlen,
+				      const u8 *buf, bool is_write)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	const struct spi_nor_otp_ops *ops = nor->params->otp.ops;
+	const size_t rlen = spi_nor_otp_region_len(nor);
+	loff_t rstart, rofs;
+	unsigned int region;
+	size_t len;
+	int ret;
+
+	if (ofs < 0 || ofs >= spi_nor_otp_size(nor))
+		return 0;
+
+	/* don't access beyond the end */
+	total_len = min_t(size_t, total_len, spi_nor_otp_size(nor) - ofs);
+
+	if (!total_len)
+		return 0;
+
+	ret = spi_nor_prep_and_lock(nor);
+	if (ret)
+		return ret;
+
+	if (is_write) {
+		ret = spi_nor_mtd_otp_range_is_locked(nor, ofs, total_len);
+		if (ret < 0) {
+			goto out;
+		} else if (ret) {
+			ret = -EROFS;
+			goto out;
+		}
+	}
+
+	while (total_len) {
+		/*
+		 * The OTP regions are mapped into a contiguous area starting
+		 * at 0 as expected by the MTD layer. This will map the MTD
+		 * file offsets to the address of an OTP region as used in the
+		 * actual SPI commands.
+		 */
+		region = spi_nor_otp_offset_to_region(nor, ofs);
+		rstart = spi_nor_otp_region_start(nor, region);
+
+		/*
+		 * The size of a OTP region is expected to be a power of two,
+		 * thus we can just mask the lower bits and get the offset into
+		 * a region.
+		 */
+		rofs = ofs & (rlen - 1);
+
+		/* don't access beyond one OTP region */
+		len = min_t(size_t, total_len, rlen - rofs);
+
+		if (is_write)
+			ret = ops->write(nor, rstart + rofs, len, buf);
+		else
+			ret = ops->read(nor, rstart + rofs, len, (u8 *)buf);
+		if (ret == 0)
+			ret = -EIO;
+		if (ret < 0)
+			goto out;
+
+		*retlen += ret;
+		ofs += ret;
+		buf += ret;
+		total_len -= ret;
+	}
+	ret = 0;
+
+out:
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static int spi_nor_mtd_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
+				size_t *retlen, u8 *buf)
+{
+	return spi_nor_mtd_otp_read_write(mtd, from, len, retlen, buf, false);
+}
+
+static int spi_nor_mtd_otp_write(struct mtd_info *mtd, loff_t to, size_t len,
+				 size_t *retlen, const u8 *buf)
+{
+	return spi_nor_mtd_otp_read_write(mtd, to, len, retlen, buf, true);
+}
+
+static int spi_nor_mtd_otp_erase(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	const struct spi_nor_otp_ops *ops = nor->params->otp.ops;
+	const size_t rlen = spi_nor_otp_region_len(nor);
+	unsigned int region;
+	loff_t rstart;
+	int ret;
+
+	/* OTP erase is optional */
+	if (!ops->erase)
+		return -EOPNOTSUPP;
+
+	if (!len)
+		return 0;
+
+	if (from < 0 || (from + len) > spi_nor_otp_size(nor))
+		return -EINVAL;
+
+	/* the user has to explicitly ask for whole regions */
+	if (!IS_ALIGNED(len, rlen) || !IS_ALIGNED(from, rlen))
+		return -EINVAL;
+
+	ret = spi_nor_prep_and_lock(nor);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_mtd_otp_range_is_locked(nor, from, len);
+	if (ret < 0) {
+		goto out;
+	} else if (ret) {
+		ret = -EROFS;
+		goto out;
+	}
+
+	while (len) {
+		region = spi_nor_otp_offset_to_region(nor, from);
+		rstart = spi_nor_otp_region_start(nor, region);
+
+		ret = ops->erase(nor, rstart);
+		if (ret)
+			goto out;
+
+		len -= rlen;
+		from += rlen;
+	}
+
+out:
+	spi_nor_unlock_and_unprep(nor);
+
+	return ret;
+}
+
+static int spi_nor_mtd_otp_lock(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	const struct spi_nor_otp_ops *ops = nor->params->otp.ops;
+	const size_t rlen = spi_nor_otp_region_len(nor);
+	unsigned int region;
+	int ret;
+
+	if (from < 0 || (from + len) > spi_nor_otp_size(nor))
+		return -EINVAL;
+
+	/* the user has to explicitly ask for whole regions */
+	if (!IS_ALIGNED(len, rlen) || !IS_ALIGNED(from, rlen))
+		return -EINVAL;
+
+	ret = spi_nor_prep_and_lock(nor);
+	if (ret)
+		return ret;
+
+	while (len) {
+		region = spi_nor_otp_offset_to_region(nor, from);
+		ret = ops->lock(nor, region);
+		if (ret)
+			goto out;
+
+		len -= rlen;
+		from += rlen;
+	}
+
+out:
+	spi_nor_unlock_and_unprep(nor);
+
+	return ret;
+}
+
+void spi_nor_set_mtd_otp_ops(struct spi_nor *nor)
+{
+	struct mtd_info *mtd = &nor->mtd;
+
+	if (!nor->params->otp.ops)
+		return;
+
+	if (WARN_ON(!is_power_of_2(spi_nor_otp_region_len(nor))))
+		return;
+
+	/*
+	 * We only support user_prot callbacks (yet).
+	 *
+	 * Some SPI NOR flashes like Macronix ones can be ordered in two
+	 * different variants. One with a factory locked OTP area and one where
+	 * it is left to the user to write to it. The factory locked OTP is
+	 * usually preprogrammed with an "electrical serial number". We don't
+	 * support these for now.
+	 */
+	mtd->_get_user_prot_info = spi_nor_mtd_otp_info;
+	mtd->_read_user_prot_reg = spi_nor_mtd_otp_read;
+	mtd->_write_user_prot_reg = spi_nor_mtd_otp_write;
+	mtd->_lock_user_prot_reg = spi_nor_mtd_otp_lock;
+	mtd->_erase_user_prot_reg = spi_nor_mtd_otp_erase;
+}
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
new file mode 100644
index 0000000000..b3b11dfed7
--- /dev/null
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -0,0 +1,1570 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+
+#include "core.h"
+
+#define SFDP_PARAM_HEADER_ID(p)	(((p)->id_msb << 8) | (p)->id_lsb)
+#define SFDP_PARAM_HEADER_PTP(p) \
+	(((p)->parameter_table_pointer[2] << 16) | \
+	 ((p)->parameter_table_pointer[1] <<  8) | \
+	 ((p)->parameter_table_pointer[0] <<  0))
+#define SFDP_PARAM_HEADER_PARAM_LEN(p) ((p)->length * 4)
+
+#define SFDP_BFPT_ID		0xff00	/* Basic Flash Parameter Table */
+#define SFDP_SECTOR_MAP_ID	0xff81	/* Sector Map Table */
+#define SFDP_4BAIT_ID		0xff84  /* 4-byte Address Instruction Table */
+#define SFDP_PROFILE1_ID	0xff05	/* xSPI Profile 1.0 table. */
+#define SFDP_SCCR_MAP_ID	0xff87	/*
+					 * Status, Control and Configuration
+					 * Register Map.
+					 */
+#define SFDP_SCCR_MAP_MC_ID	0xff88	/*
+					 * Status, Control and Configuration
+					 * Register Map Offsets for Multi-Chip
+					 * SPI Memory Devices.
+					 */
+
+#define SFDP_SIGNATURE		0x50444653U
+
+struct sfdp_header {
+	u32		signature; /* Ox50444653U <=> "SFDP" */
+	u8		minor;
+	u8		major;
+	u8		nph; /* 0-base number of parameter headers */
+	u8		unused;
+
+	/* Basic Flash Parameter Table. */
+	struct sfdp_parameter_header	bfpt_header;
+};
+
+/* Fast Read settings. */
+struct sfdp_bfpt_read {
+	/* The Fast Read x-y-z hardware capability in params->hwcaps.mask. */
+	u32			hwcaps;
+
+	/*
+	 * The <supported_bit> bit in <supported_dword> BFPT DWORD tells us
+	 * whether the Fast Read x-y-z command is supported.
+	 */
+	u32			supported_dword;
+	u32			supported_bit;
+
+	/*
+	 * The half-word at offset <setting_shift> in <setting_dword> BFPT DWORD
+	 * encodes the op code, the number of mode clocks and the number of wait
+	 * states to be used by Fast Read x-y-z command.
+	 */
+	u32			settings_dword;
+	u32			settings_shift;
+
+	/* The SPI protocol for this Fast Read x-y-z command. */
+	enum spi_nor_protocol	proto;
+};
+
+struct sfdp_bfpt_erase {
+	/*
+	 * The half-word at offset <shift> in DWORD <dword> encodes the
+	 * op code and erase sector size to be used by Sector Erase commands.
+	 */
+	u32			dword;
+	u32			shift;
+};
+
+#define SMPT_CMD_ADDRESS_LEN_MASK		GENMASK(23, 22)
+#define SMPT_CMD_ADDRESS_LEN_0			(0x0UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_3			(0x1UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_4			(0x2UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_USE_CURRENT	(0x3UL << 22)
+
+#define SMPT_CMD_READ_DUMMY_MASK		GENMASK(19, 16)
+#define SMPT_CMD_READ_DUMMY_SHIFT		16
+#define SMPT_CMD_READ_DUMMY(_cmd) \
+	(((_cmd) & SMPT_CMD_READ_DUMMY_MASK) >> SMPT_CMD_READ_DUMMY_SHIFT)
+#define SMPT_CMD_READ_DUMMY_IS_VARIABLE		0xfUL
+
+#define SMPT_CMD_READ_DATA_MASK			GENMASK(31, 24)
+#define SMPT_CMD_READ_DATA_SHIFT		24
+#define SMPT_CMD_READ_DATA(_cmd) \
+	(((_cmd) & SMPT_CMD_READ_DATA_MASK) >> SMPT_CMD_READ_DATA_SHIFT)
+
+#define SMPT_CMD_OPCODE_MASK			GENMASK(15, 8)
+#define SMPT_CMD_OPCODE_SHIFT			8
+#define SMPT_CMD_OPCODE(_cmd) \
+	(((_cmd) & SMPT_CMD_OPCODE_MASK) >> SMPT_CMD_OPCODE_SHIFT)
+
+#define SMPT_MAP_REGION_COUNT_MASK		GENMASK(23, 16)
+#define SMPT_MAP_REGION_COUNT_SHIFT		16
+#define SMPT_MAP_REGION_COUNT(_header) \
+	((((_header) & SMPT_MAP_REGION_COUNT_MASK) >> \
+	  SMPT_MAP_REGION_COUNT_SHIFT) + 1)
+
+#define SMPT_MAP_ID_MASK			GENMASK(15, 8)
+#define SMPT_MAP_ID_SHIFT			8
+#define SMPT_MAP_ID(_header) \
+	(((_header) & SMPT_MAP_ID_MASK) >> SMPT_MAP_ID_SHIFT)
+
+#define SMPT_MAP_REGION_SIZE_MASK		GENMASK(31, 8)
+#define SMPT_MAP_REGION_SIZE_SHIFT		8
+#define SMPT_MAP_REGION_SIZE(_region) \
+	(((((_region) & SMPT_MAP_REGION_SIZE_MASK) >> \
+	   SMPT_MAP_REGION_SIZE_SHIFT) + 1) * 256)
+
+#define SMPT_MAP_REGION_ERASE_TYPE_MASK		GENMASK(3, 0)
+#define SMPT_MAP_REGION_ERASE_TYPE(_region) \
+	((_region) & SMPT_MAP_REGION_ERASE_TYPE_MASK)
+
+#define SMPT_DESC_TYPE_MAP			BIT(1)
+#define SMPT_DESC_END				BIT(0)
+
+#define SFDP_4BAIT_DWORD_MAX	2
+
+struct sfdp_4bait {
+	/* The hardware capability. */
+	u32		hwcaps;
+
+	/*
+	 * The <supported_bit> bit in DWORD1 of the 4BAIT tells us whether
+	 * the associated 4-byte address op code is supported.
+	 */
+	u32		supported_bit;
+};
+
+/**
+ * spi_nor_read_raw() - raw read of serial flash memory. read_opcode,
+ *			addr_nbytes and read_dummy members of the struct spi_nor
+ *			should be previously set.
+ * @nor:	pointer to a 'struct spi_nor'
+ * @addr:	offset in the serial flash memory
+ * @len:	number of bytes to read
+ * @buf:	buffer where the data is copied into (dma-safe memory)
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
+{
+	ssize_t ret;
+
+	while (len) {
+		ret = spi_nor_read_data(nor, addr, len, buf);
+		if (ret < 0)
+			return ret;
+		if (!ret || ret > len)
+			return -EIO;
+
+		buf += ret;
+		addr += ret;
+		len -= ret;
+	}
+	return 0;
+}
+
+/**
+ * spi_nor_read_sfdp() - read Serial Flash Discoverable Parameters.
+ * @nor:	pointer to a 'struct spi_nor'
+ * @addr:	offset in the SFDP area to start reading data from
+ * @len:	number of bytes to read
+ * @buf:	buffer where the SFDP data are copied into (dma-safe memory)
+ *
+ * Whatever the actual numbers of bytes for address and dummy cycles are
+ * for (Fast) Read commands, the Read SFDP (5Ah) instruction is always
+ * followed by a 3-byte address and 8 dummy clock cycles.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
+			     size_t len, void *buf)
+{
+	u8 addr_nbytes, read_opcode, read_dummy;
+	int ret;
+
+	read_opcode = nor->read_opcode;
+	addr_nbytes = nor->addr_nbytes;
+	read_dummy = nor->read_dummy;
+
+	nor->read_opcode = SPINOR_OP_RDSFDP;
+	nor->addr_nbytes = 3;
+	nor->read_dummy = 8;
+
+	ret = spi_nor_read_raw(nor, addr, len, buf);
+
+	nor->read_opcode = read_opcode;
+	nor->addr_nbytes = addr_nbytes;
+	nor->read_dummy = read_dummy;
+
+	return ret;
+}
+
+/**
+ * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters.
+ * @nor:	pointer to a 'struct spi_nor'
+ * @addr:	offset in the SFDP area to start reading data from
+ * @len:	number of bytes to read
+ * @buf:	buffer where the SFDP data are copied into
+ *
+ * Wrap spi_nor_read_sfdp() using a kmalloc'ed bounce buffer as @buf is now not
+ * guaranteed to be dma-safe.
+ *
+ * Return: -ENOMEM if kmalloc() fails, the return code of spi_nor_read_sfdp()
+ *          otherwise.
+ */
+static int spi_nor_read_sfdp_dma_unsafe(struct spi_nor *nor, u32 addr,
+					size_t len, void *buf)
+{
+	void *dma_safe_buf;
+	int ret;
+
+	dma_safe_buf = kmalloc(len, GFP_KERNEL);
+	if (!dma_safe_buf)
+		return -ENOMEM;
+
+	ret = spi_nor_read_sfdp(nor, addr, len, dma_safe_buf);
+	memcpy(buf, dma_safe_buf, len);
+	kfree(dma_safe_buf);
+
+	return ret;
+}
+
+static void
+spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read,
+				    u16 half,
+				    enum spi_nor_protocol proto)
+{
+	read->num_mode_clocks = (half >> 5) & 0x07;
+	read->num_wait_states = (half >> 0) & 0x1f;
+	read->opcode = (half >> 8) & 0xff;
+	read->proto = proto;
+}
+
+static const struct sfdp_bfpt_read sfdp_bfpt_reads[] = {
+	/* Fast Read 1-1-2 */
+	{
+		SNOR_HWCAPS_READ_1_1_2,
+		SFDP_DWORD(1), BIT(16),	/* Supported bit */
+		SFDP_DWORD(4), 0,	/* Settings */
+		SNOR_PROTO_1_1_2,
+	},
+
+	/* Fast Read 1-2-2 */
+	{
+		SNOR_HWCAPS_READ_1_2_2,
+		SFDP_DWORD(1), BIT(20),	/* Supported bit */
+		SFDP_DWORD(4), 16,	/* Settings */
+		SNOR_PROTO_1_2_2,
+	},
+
+	/* Fast Read 2-2-2 */
+	{
+		SNOR_HWCAPS_READ_2_2_2,
+		SFDP_DWORD(5),  BIT(0),	/* Supported bit */
+		SFDP_DWORD(6), 16,	/* Settings */
+		SNOR_PROTO_2_2_2,
+	},
+
+	/* Fast Read 1-1-4 */
+	{
+		SNOR_HWCAPS_READ_1_1_4,
+		SFDP_DWORD(1), BIT(22),	/* Supported bit */
+		SFDP_DWORD(3), 16,	/* Settings */
+		SNOR_PROTO_1_1_4,
+	},
+
+	/* Fast Read 1-4-4 */
+	{
+		SNOR_HWCAPS_READ_1_4_4,
+		SFDP_DWORD(1), BIT(21),	/* Supported bit */
+		SFDP_DWORD(3), 0,	/* Settings */
+		SNOR_PROTO_1_4_4,
+	},
+
+	/* Fast Read 4-4-4 */
+	{
+		SNOR_HWCAPS_READ_4_4_4,
+		SFDP_DWORD(5), BIT(4),	/* Supported bit */
+		SFDP_DWORD(7), 16,	/* Settings */
+		SNOR_PROTO_4_4_4,
+	},
+};
+
+static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = {
+	/* Erase Type 1 in DWORD8 bits[15:0] */
+	{SFDP_DWORD(8), 0},
+
+	/* Erase Type 2 in DWORD8 bits[31:16] */
+	{SFDP_DWORD(8), 16},
+
+	/* Erase Type 3 in DWORD9 bits[15:0] */
+	{SFDP_DWORD(9), 0},
+
+	/* Erase Type 4 in DWORD9 bits[31:16] */
+	{SFDP_DWORD(9), 16},
+};
+
+/**
+ * spi_nor_set_erase_settings_from_bfpt() - set erase type settings from BFPT
+ * @erase:	pointer to a structure that describes a SPI NOR erase type
+ * @size:	the size of the sector/block erased by the erase type
+ * @opcode:	the SPI command op code to erase the sector/block
+ * @i:		erase type index as sorted in the Basic Flash Parameter Table
+ *
+ * The supported Erase Types will be sorted at init in ascending order, with
+ * the smallest Erase Type size being the first member in the erase_type array
+ * of the spi_nor_erase_map structure. Save the Erase Type index as sorted in
+ * the Basic Flash Parameter Table since it will be used later on to
+ * synchronize with the supported Erase Types defined in SFDP optional tables.
+ */
+static void
+spi_nor_set_erase_settings_from_bfpt(struct spi_nor_erase_type *erase,
+				     u32 size, u8 opcode, u8 i)
+{
+	erase->idx = i;
+	spi_nor_set_erase_type(erase, size, opcode);
+}
+
+/**
+ * spi_nor_map_cmp_erase_type() - compare the map's erase types by size
+ * @l:	member in the left half of the map's erase_type array
+ * @r:	member in the right half of the map's erase_type array
+ *
+ * Comparison function used in the sort() call to sort in ascending order the
+ * map's erase types, the smallest erase type size being the first member in the
+ * sorted erase_type array.
+ *
+ * Return: the result of @l->size - @r->size
+ */
+static int spi_nor_map_cmp_erase_type(const void *l, const void *r)
+{
+	const struct spi_nor_erase_type *left = l, *right = r;
+
+	return left->size - right->size;
+}
+
+/**
+ * spi_nor_sort_erase_mask() - sort erase mask
+ * @map:	the erase map of the SPI NOR
+ * @erase_mask:	the erase type mask to be sorted
+ *
+ * Replicate the sort done for the map's erase types in BFPT: sort the erase
+ * mask in ascending order with the smallest erase type size starting from
+ * BIT(0) in the sorted erase mask.
+ *
+ * Return: sorted erase mask.
+ */
+static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask)
+{
+	struct spi_nor_erase_type *erase_type = map->erase_type;
+	int i;
+	u8 sorted_erase_mask = 0;
+
+	if (!erase_mask)
+		return 0;
+
+	/* Replicate the sort done for the map's erase types. */
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+		if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx))
+			sorted_erase_mask |= BIT(i);
+
+	return sorted_erase_mask;
+}
+
+/**
+ * spi_nor_regions_sort_erase_types() - sort erase types in each region
+ * @map:	the erase map of the SPI NOR
+ *
+ * Function assumes that the erase types defined in the erase map are already
+ * sorted in ascending order, with the smallest erase type size being the first
+ * member in the erase_type array. It replicates the sort done for the map's
+ * erase types. Each region's erase bitmask will indicate which erase types are
+ * supported from the sorted erase types defined in the erase map.
+ * Sort the all region's erase type at init in order to speed up the process of
+ * finding the best erase command at runtime.
+ */
+static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
+{
+	struct spi_nor_erase_region *region = map->regions;
+	u8 region_erase_mask, sorted_erase_mask;
+
+	while (region) {
+		region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
+
+		sorted_erase_mask = spi_nor_sort_erase_mask(map,
+							    region_erase_mask);
+
+		/* Overwrite erase mask. */
+		region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) |
+				 sorted_erase_mask;
+
+		region = spi_nor_region_next(region);
+	}
+}
+
+/**
+ * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table.
+ * @nor:		pointer to a 'struct spi_nor'
+ * @bfpt_header:	pointer to the 'struct sfdp_parameter_header' describing
+ *			the Basic Flash Parameter Table length and version
+ *
+ * The Basic Flash Parameter Table is the main and only mandatory table as
+ * defined by the SFDP (JESD216) specification.
+ * It provides us with the total size (memory density) of the data array and
+ * the number of address bytes for Fast Read, Page Program and Sector Erase
+ * commands.
+ * For Fast READ commands, it also gives the number of mode clock cycles and
+ * wait states (regrouped in the number of dummy clock cycles) for each
+ * supported instruction op code.
+ * For Page Program, the page size is now available since JESD216 rev A, however
+ * the supported instruction op codes are still not provided.
+ * For Sector Erase commands, this table stores the supported instruction op
+ * codes and the associated sector sizes.
+ * Finally, the Quad Enable Requirements (QER) are also available since JESD216
+ * rev A. The QER bits encode the manufacturer dependent procedure to be
+ * executed to set the Quad Enable (QE) bit in some internal register of the
+ * Quad SPI memory. Indeed the QE bit, when it exists, must be set before
+ * sending any Quad SPI command to the memory. Actually, setting the QE bit
+ * tells the memory to reassign its WP# and HOLD#/RESET# pins to functions IO2
+ * and IO3 hence enabling 4 (Quad) I/O lines.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_bfpt(struct spi_nor *nor,
+			      const struct sfdp_parameter_header *bfpt_header)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	struct spi_nor_erase_map *map = &params->erase_map;
+	struct spi_nor_erase_type *erase_type = map->erase_type;
+	struct sfdp_bfpt bfpt;
+	size_t len;
+	int i, cmd, err;
+	u32 addr, val;
+	u32 dword;
+	u16 half;
+	u8 erase_mask;
+
+	/* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */
+	if (bfpt_header->length < BFPT_DWORD_MAX_JESD216)
+		return -EINVAL;
+
+	/* Read the Basic Flash Parameter Table. */
+	len = min_t(size_t, sizeof(bfpt),
+		    bfpt_header->length * sizeof(u32));
+	addr = SFDP_PARAM_HEADER_PTP(bfpt_header);
+	memset(&bfpt, 0, sizeof(bfpt));
+	err = spi_nor_read_sfdp_dma_unsafe(nor,  addr, len, &bfpt);
+	if (err < 0)
+		return err;
+
+	/* Fix endianness of the BFPT DWORDs. */
+	le32_to_cpu_array(bfpt.dwords, BFPT_DWORD_MAX);
+
+	/* Number of address bytes. */
+	switch (bfpt.dwords[SFDP_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
+	case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
+	case BFPT_DWORD1_ADDRESS_BYTES_3_OR_4:
+		params->addr_nbytes = 3;
+		params->addr_mode_nbytes = 3;
+		break;
+
+	case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
+		params->addr_nbytes = 4;
+		params->addr_mode_nbytes = 4;
+		break;
+
+	default:
+		break;
+	}
+
+	/* Flash Memory Density (in bits). */
+	val = bfpt.dwords[SFDP_DWORD(2)];
+	if (val & BIT(31)) {
+		val &= ~BIT(31);
+
+		/*
+		 * Prevent overflows on params->size. Anyway, a NOR of 2^64
+		 * bits is unlikely to exist so this error probably means
+		 * the BFPT we are reading is corrupted/wrong.
+		 */
+		if (val > 63)
+			return -EINVAL;
+
+		params->size = 1ULL << val;
+	} else {
+		params->size = val + 1;
+	}
+	params->size >>= 3; /* Convert to bytes. */
+
+	/* Fast Read settings. */
+	for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_reads); i++) {
+		const struct sfdp_bfpt_read *rd = &sfdp_bfpt_reads[i];
+		struct spi_nor_read_command *read;
+
+		if (!(bfpt.dwords[rd->supported_dword] & rd->supported_bit)) {
+			params->hwcaps.mask &= ~rd->hwcaps;
+			continue;
+		}
+
+		params->hwcaps.mask |= rd->hwcaps;
+		cmd = spi_nor_hwcaps_read2cmd(rd->hwcaps);
+		read = &params->reads[cmd];
+		half = bfpt.dwords[rd->settings_dword] >> rd->settings_shift;
+		spi_nor_set_read_settings_from_bfpt(read, half, rd->proto);
+	}
+
+	/*
+	 * Sector Erase settings. Reinitialize the uniform erase map using the
+	 * Erase Types defined in the bfpt table.
+	 */
+	erase_mask = 0;
+	memset(&params->erase_map, 0, sizeof(params->erase_map));
+	for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
+		const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
+		u32 erasesize;
+		u8 opcode;
+
+		half = bfpt.dwords[er->dword] >> er->shift;
+		erasesize = half & 0xff;
+
+		/* erasesize == 0 means this Erase Type is not supported. */
+		if (!erasesize)
+			continue;
+
+		erasesize = 1U << erasesize;
+		opcode = (half >> 8) & 0xff;
+		erase_mask |= BIT(i);
+		spi_nor_set_erase_settings_from_bfpt(&erase_type[i], erasesize,
+						     opcode, i);
+	}
+	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
+	/*
+	 * Sort all the map's Erase Types in ascending order with the smallest
+	 * erase size being the first member in the erase_type array.
+	 */
+	sort(erase_type, SNOR_ERASE_TYPE_MAX, sizeof(erase_type[0]),
+	     spi_nor_map_cmp_erase_type, NULL);
+	/*
+	 * Sort the erase types in the uniform region in order to update the
+	 * uniform_erase_type bitmask. The bitmask will be used later on when
+	 * selecting the uniform erase.
+	 */
+	spi_nor_regions_sort_erase_types(map);
+	map->uniform_erase_type = map->uniform_region.offset &
+				  SNOR_ERASE_TYPE_MASK;
+
+	/* Stop here if not JESD216 rev A or later. */
+	if (bfpt_header->length == BFPT_DWORD_MAX_JESD216)
+		return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt);
+
+	/* Page size: this field specifies 'N' so the page size = 2^N bytes. */
+	val = bfpt.dwords[SFDP_DWORD(11)];
+	val &= BFPT_DWORD11_PAGE_SIZE_MASK;
+	val >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
+	params->page_size = 1U << val;
+
+	/* Quad Enable Requirements. */
+	switch (bfpt.dwords[SFDP_DWORD(15)] & BFPT_DWORD15_QER_MASK) {
+	case BFPT_DWORD15_QER_NONE:
+		params->quad_enable = NULL;
+		break;
+
+	case BFPT_DWORD15_QER_SR2_BIT1_BUGGY:
+		/*
+		 * Writing only one byte to the Status Register has the
+		 * side-effect of clearing Status Register 2.
+		 */
+	case BFPT_DWORD15_QER_SR2_BIT1_NO_RD:
+		/*
+		 * Read Configuration Register (35h) instruction is not
+		 * supported.
+		 */
+		nor->flags |= SNOR_F_HAS_16BIT_SR | SNOR_F_NO_READ_CR;
+		params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+		break;
+
+	case BFPT_DWORD15_QER_SR1_BIT6:
+		nor->flags &= ~SNOR_F_HAS_16BIT_SR;
+		params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+		break;
+
+	case BFPT_DWORD15_QER_SR2_BIT7:
+		nor->flags &= ~SNOR_F_HAS_16BIT_SR;
+		params->quad_enable = spi_nor_sr2_bit7_quad_enable;
+		break;
+
+	case BFPT_DWORD15_QER_SR2_BIT1:
+		/*
+		 * JESD216 rev B or later does not specify if writing only one
+		 * byte to the Status Register clears or not the Status
+		 * Register 2, so let's be cautious and keep the default
+		 * assumption of a 16-bit Write Status (01h) command.
+		 */
+		nor->flags |= SNOR_F_HAS_16BIT_SR;
+
+		params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+		break;
+
+	default:
+		dev_dbg(nor->dev, "BFPT QER reserved value used\n");
+		break;
+	}
+
+	dword = bfpt.dwords[SFDP_DWORD(16)] & BFPT_DWORD16_4B_ADDR_MODE_MASK;
+	if (SFDP_MASK_CHECK(dword, BFPT_DWORD16_4B_ADDR_MODE_BRWR))
+		params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode_brwr;
+	else if (SFDP_MASK_CHECK(dword, BFPT_DWORD16_4B_ADDR_MODE_WREN_EN4B_EX4B))
+		params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode_wren_en4b_ex4b;
+	else if (SFDP_MASK_CHECK(dword, BFPT_DWORD16_4B_ADDR_MODE_EN4B_EX4B))
+		params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode_en4b_ex4b;
+	else
+		dev_dbg(nor->dev, "BFPT: 4-Byte Address Mode method is not recognized or not implemented\n");
+
+	/* Soft Reset support. */
+	if (bfpt.dwords[SFDP_DWORD(16)] & BFPT_DWORD16_SWRST_EN_RST)
+		nor->flags |= SNOR_F_SOFT_RESET;
+
+	/* Stop here if not JESD216 rev C or later. */
+	if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B)
+		return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt);
+
+	/* 8D-8D-8D command extension. */
+	switch (bfpt.dwords[SFDP_DWORD(18)] & BFPT_DWORD18_CMD_EXT_MASK) {
+	case BFPT_DWORD18_CMD_EXT_REP:
+		nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
+		break;
+
+	case BFPT_DWORD18_CMD_EXT_INV:
+		nor->cmd_ext_type = SPI_NOR_EXT_INVERT;
+		break;
+
+	case BFPT_DWORD18_CMD_EXT_RES:
+		dev_dbg(nor->dev, "Reserved command extension used\n");
+		break;
+
+	case BFPT_DWORD18_CMD_EXT_16B:
+		dev_dbg(nor->dev, "16-bit opcodes not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt);
+}
+
+/**
+ * spi_nor_smpt_addr_nbytes() - return the number of address bytes used in the
+ *			       configuration detection command.
+ * @nor:	pointer to a 'struct spi_nor'
+ * @settings:	configuration detection command descriptor, dword1
+ */
+static u8 spi_nor_smpt_addr_nbytes(const struct spi_nor *nor, const u32 settings)
+{
+	switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) {
+	case SMPT_CMD_ADDRESS_LEN_0:
+		return 0;
+	case SMPT_CMD_ADDRESS_LEN_3:
+		return 3;
+	case SMPT_CMD_ADDRESS_LEN_4:
+		return 4;
+	case SMPT_CMD_ADDRESS_LEN_USE_CURRENT:
+	default:
+		return nor->params->addr_mode_nbytes;
+	}
+}
+
+/**
+ * spi_nor_smpt_read_dummy() - return the configuration detection command read
+ *			       latency, in clock cycles.
+ * @nor:	pointer to a 'struct spi_nor'
+ * @settings:	configuration detection command descriptor, dword1
+ *
+ * Return: the number of dummy cycles for an SMPT read
+ */
+static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings)
+{
+	u8 read_dummy = SMPT_CMD_READ_DUMMY(settings);
+
+	if (read_dummy == SMPT_CMD_READ_DUMMY_IS_VARIABLE)
+		return nor->read_dummy;
+	return read_dummy;
+}
+
+/**
+ * spi_nor_get_map_in_use() - get the configuration map in use
+ * @nor:	pointer to a 'struct spi_nor'
+ * @smpt:	pointer to the sector map parameter table
+ * @smpt_len:	sector map parameter table length
+ *
+ * Return: pointer to the map in use, ERR_PTR(-errno) otherwise.
+ */
+static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
+					 u8 smpt_len)
+{
+	const u32 *ret;
+	u8 *buf;
+	u32 addr;
+	int err;
+	u8 i;
+	u8 addr_nbytes, read_opcode, read_dummy;
+	u8 read_data_mask, map_id;
+
+	/* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
+	buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		return ERR_PTR(-ENOMEM);
+
+	addr_nbytes = nor->addr_nbytes;
+	read_dummy = nor->read_dummy;
+	read_opcode = nor->read_opcode;
+
+	map_id = 0;
+	/* Determine if there are any optional Detection Command Descriptors */
+	for (i = 0; i < smpt_len; i += 2) {
+		if (smpt[i] & SMPT_DESC_TYPE_MAP)
+			break;
+
+		read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
+		nor->addr_nbytes = spi_nor_smpt_addr_nbytes(nor, smpt[i]);
+		nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
+		nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
+		addr = smpt[i + 1];
+
+		err = spi_nor_read_raw(nor, addr, 1, buf);
+		if (err) {
+			ret = ERR_PTR(err);
+			goto out;
+		}
+
+		/*
+		 * Build an index value that is used to select the Sector Map
+		 * Configuration that is currently in use.
+		 */
+		map_id = map_id << 1 | !!(*buf & read_data_mask);
+	}
+
+	/*
+	 * If command descriptors are provided, they always precede map
+	 * descriptors in the table. There is no need to start the iteration
+	 * over smpt array all over again.
+	 *
+	 * Find the matching configuration map.
+	 */
+	ret = ERR_PTR(-EINVAL);
+	while (i < smpt_len) {
+		if (SMPT_MAP_ID(smpt[i]) == map_id) {
+			ret = smpt + i;
+			break;
+		}
+
+		/*
+		 * If there are no more configuration map descriptors and no
+		 * configuration ID matched the configuration identifier, the
+		 * sector address map is unknown.
+		 */
+		if (smpt[i] & SMPT_DESC_END)
+			break;
+
+		/* increment the table index to the next map */
+		i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1;
+	}
+
+	/* fall through */
+out:
+	kfree(buf);
+	nor->addr_nbytes = addr_nbytes;
+	nor->read_dummy = read_dummy;
+	nor->read_opcode = read_opcode;
+	return ret;
+}
+
+static void spi_nor_region_mark_end(struct spi_nor_erase_region *region)
+{
+	region->offset |= SNOR_LAST_REGION;
+}
+
+static void spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
+{
+	region->offset |= SNOR_OVERLAID_REGION;
+}
+
+/**
+ * spi_nor_region_check_overlay() - set overlay bit when the region is overlaid
+ * @region:	pointer to a structure that describes a SPI NOR erase region
+ * @erase:	pointer to a structure that describes a SPI NOR erase type
+ * @erase_type:	erase type bitmask
+ */
+static void
+spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
+			     const struct spi_nor_erase_type *erase,
+			     const u8 erase_type)
+{
+	int i;
+
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+		if (!(erase[i].size && erase_type & BIT(erase[i].idx)))
+			continue;
+		if (region->size & erase[i].size_mask) {
+			spi_nor_region_mark_overlay(region);
+			return;
+		}
+	}
+}
+
+/**
+ * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map
+ * @nor:	pointer to a 'struct spi_nor'
+ * @smpt:	pointer to the sector map parameter table
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
+					      const u32 *smpt)
+{
+	struct spi_nor_erase_map *map = &nor->params->erase_map;
+	struct spi_nor_erase_type *erase = map->erase_type;
+	struct spi_nor_erase_region *region;
+	u64 offset;
+	u32 region_count;
+	int i, j;
+	u8 uniform_erase_type, save_uniform_erase_type;
+	u8 erase_type, regions_erase_type;
+
+	region_count = SMPT_MAP_REGION_COUNT(*smpt);
+	/*
+	 * The regions will be freed when the driver detaches from the
+	 * device.
+	 */
+	region = devm_kcalloc(nor->dev, region_count, sizeof(*region),
+			      GFP_KERNEL);
+	if (!region)
+		return -ENOMEM;
+	map->regions = region;
+
+	uniform_erase_type = 0xff;
+	regions_erase_type = 0;
+	offset = 0;
+	/* Populate regions. */
+	for (i = 0; i < region_count; i++) {
+		j = i + 1; /* index for the region dword */
+		region[i].size = SMPT_MAP_REGION_SIZE(smpt[j]);
+		erase_type = SMPT_MAP_REGION_ERASE_TYPE(smpt[j]);
+		region[i].offset = offset | erase_type;
+
+		spi_nor_region_check_overlay(&region[i], erase, erase_type);
+
+		/*
+		 * Save the erase types that are supported in all regions and
+		 * can erase the entire flash memory.
+		 */
+		uniform_erase_type &= erase_type;
+
+		/*
+		 * regions_erase_type mask will indicate all the erase types
+		 * supported in this configuration map.
+		 */
+		regions_erase_type |= erase_type;
+
+		offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) +
+			 region[i].size;
+	}
+	spi_nor_region_mark_end(&region[i - 1]);
+
+	save_uniform_erase_type = map->uniform_erase_type;
+	map->uniform_erase_type = spi_nor_sort_erase_mask(map,
+							  uniform_erase_type);
+
+	if (!regions_erase_type) {
+		/*
+		 * Roll back to the previous uniform_erase_type mask, SMPT is
+		 * broken.
+		 */
+		map->uniform_erase_type = save_uniform_erase_type;
+		return -EINVAL;
+	}
+
+	/*
+	 * BFPT advertises all the erase types supported by all the possible
+	 * map configurations. Mask out the erase types that are not supported
+	 * by the current map configuration.
+	 */
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+		if (!(regions_erase_type & BIT(erase[i].idx)))
+			spi_nor_mask_erase_type(&erase[i]);
+
+	return 0;
+}
+
+/**
+ * spi_nor_parse_smpt() - parse Sector Map Parameter Table
+ * @nor:		pointer to a 'struct spi_nor'
+ * @smpt_header:	sector map parameter table header
+ *
+ * This table is optional, but when available, we parse it to identify the
+ * location and size of sectors within the main data array of the flash memory
+ * device and to identify which Erase Types are supported by each sector.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_smpt(struct spi_nor *nor,
+			      const struct sfdp_parameter_header *smpt_header)
+{
+	const u32 *sector_map;
+	u32 *smpt;
+	size_t len;
+	u32 addr;
+	int ret;
+
+	/* Read the Sector Map Parameter Table. */
+	len = smpt_header->length * sizeof(*smpt);
+	smpt = kmalloc(len, GFP_KERNEL);
+	if (!smpt)
+		return -ENOMEM;
+
+	addr = SFDP_PARAM_HEADER_PTP(smpt_header);
+	ret = spi_nor_read_sfdp(nor, addr, len, smpt);
+	if (ret)
+		goto out;
+
+	/* Fix endianness of the SMPT DWORDs. */
+	le32_to_cpu_array(smpt, smpt_header->length);
+
+	sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length);
+	if (IS_ERR(sector_map)) {
+		ret = PTR_ERR(sector_map);
+		goto out;
+	}
+
+	ret = spi_nor_init_non_uniform_erase_map(nor, sector_map);
+	if (ret)
+		goto out;
+
+	spi_nor_regions_sort_erase_types(&nor->params->erase_map);
+	/* fall through */
+out:
+	kfree(smpt);
+	return ret;
+}
+
+/**
+ * spi_nor_parse_4bait() - parse the 4-Byte Address Instruction Table
+ * @nor:		pointer to a 'struct spi_nor'.
+ * @param_header:	pointer to the 'struct sfdp_parameter_header' describing
+ *			the 4-Byte Address Instruction Table length and version.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_4bait(struct spi_nor *nor,
+			       const struct sfdp_parameter_header *param_header)
+{
+	static const struct sfdp_4bait reads[] = {
+		{ SNOR_HWCAPS_READ,		BIT(0) },
+		{ SNOR_HWCAPS_READ_FAST,	BIT(1) },
+		{ SNOR_HWCAPS_READ_1_1_2,	BIT(2) },
+		{ SNOR_HWCAPS_READ_1_2_2,	BIT(3) },
+		{ SNOR_HWCAPS_READ_1_1_4,	BIT(4) },
+		{ SNOR_HWCAPS_READ_1_4_4,	BIT(5) },
+		{ SNOR_HWCAPS_READ_1_1_1_DTR,	BIT(13) },
+		{ SNOR_HWCAPS_READ_1_2_2_DTR,	BIT(14) },
+		{ SNOR_HWCAPS_READ_1_4_4_DTR,	BIT(15) },
+	};
+	static const struct sfdp_4bait programs[] = {
+		{ SNOR_HWCAPS_PP,		BIT(6) },
+		{ SNOR_HWCAPS_PP_1_1_4,		BIT(7) },
+		{ SNOR_HWCAPS_PP_1_4_4,		BIT(8) },
+	};
+	static const struct sfdp_4bait erases[SNOR_ERASE_TYPE_MAX] = {
+		{ 0u /* not used */,		BIT(9) },
+		{ 0u /* not used */,		BIT(10) },
+		{ 0u /* not used */,		BIT(11) },
+		{ 0u /* not used */,		BIT(12) },
+	};
+	struct spi_nor_flash_parameter *params = nor->params;
+	struct spi_nor_pp_command *params_pp = params->page_programs;
+	struct spi_nor_erase_map *map = &params->erase_map;
+	struct spi_nor_erase_type *erase_type = map->erase_type;
+	u32 *dwords;
+	size_t len;
+	u32 addr, discard_hwcaps, read_hwcaps, pp_hwcaps, erase_mask;
+	int i, ret;
+
+	if (param_header->major != SFDP_JESD216_MAJOR ||
+	    param_header->length < SFDP_4BAIT_DWORD_MAX)
+		return -EINVAL;
+
+	/* Read the 4-byte Address Instruction Table. */
+	len = sizeof(*dwords) * SFDP_4BAIT_DWORD_MAX;
+
+	/* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
+	dwords = kmalloc(len, GFP_KERNEL);
+	if (!dwords)
+		return -ENOMEM;
+
+	addr = SFDP_PARAM_HEADER_PTP(param_header);
+	ret = spi_nor_read_sfdp(nor, addr, len, dwords);
+	if (ret)
+		goto out;
+
+	/* Fix endianness of the 4BAIT DWORDs. */
+	le32_to_cpu_array(dwords, SFDP_4BAIT_DWORD_MAX);
+
+	/*
+	 * Compute the subset of (Fast) Read commands for which the 4-byte
+	 * version is supported.
+	 */
+	discard_hwcaps = 0;
+	read_hwcaps = 0;
+	for (i = 0; i < ARRAY_SIZE(reads); i++) {
+		const struct sfdp_4bait *read = &reads[i];
+
+		discard_hwcaps |= read->hwcaps;
+		if ((params->hwcaps.mask & read->hwcaps) &&
+		    (dwords[SFDP_DWORD(1)] & read->supported_bit))
+			read_hwcaps |= read->hwcaps;
+	}
+
+	/*
+	 * Compute the subset of Page Program commands for which the 4-byte
+	 * version is supported.
+	 */
+	pp_hwcaps = 0;
+	for (i = 0; i < ARRAY_SIZE(programs); i++) {
+		const struct sfdp_4bait *program = &programs[i];
+
+		/*
+		 * The 4 Byte Address Instruction (Optional) Table is the only
+		 * SFDP table that indicates support for Page Program Commands.
+		 * Bypass the params->hwcaps.mask and consider 4BAIT the biggest
+		 * authority for specifying Page Program support.
+		 */
+		discard_hwcaps |= program->hwcaps;
+		if (dwords[SFDP_DWORD(1)] & program->supported_bit)
+			pp_hwcaps |= program->hwcaps;
+	}
+
+	/*
+	 * Compute the subset of Sector Erase commands for which the 4-byte
+	 * version is supported.
+	 */
+	erase_mask = 0;
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+		const struct sfdp_4bait *erase = &erases[i];
+
+		if (dwords[SFDP_DWORD(1)] & erase->supported_bit)
+			erase_mask |= BIT(i);
+	}
+
+	/* Replicate the sort done for the map's erase types in BFPT. */
+	erase_mask = spi_nor_sort_erase_mask(map, erase_mask);
+
+	/*
+	 * We need at least one 4-byte op code per read, program and erase
+	 * operation; the .read(), .write() and .erase() hooks share the
+	 * nor->addr_nbytes value.
+	 */
+	if (!read_hwcaps || !pp_hwcaps || !erase_mask)
+		goto out;
+
+	/*
+	 * Discard all operations from the 4-byte instruction set which are
+	 * not supported by this memory.
+	 */
+	params->hwcaps.mask &= ~discard_hwcaps;
+	params->hwcaps.mask |= (read_hwcaps | pp_hwcaps);
+
+	/* Use the 4-byte address instruction set. */
+	for (i = 0; i < SNOR_CMD_READ_MAX; i++) {
+		struct spi_nor_read_command *read_cmd = &params->reads[i];
+
+		read_cmd->opcode = spi_nor_convert_3to4_read(read_cmd->opcode);
+	}
+
+	/* 4BAIT is the only SFDP table that indicates page program support. */
+	if (pp_hwcaps & SNOR_HWCAPS_PP) {
+		spi_nor_set_pp_settings(&params_pp[SNOR_CMD_PP],
+					SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1);
+		/*
+		 * Since xSPI Page Program opcode is backward compatible with
+		 * Legacy SPI, use Legacy SPI opcode there as well.
+		 */
+		spi_nor_set_pp_settings(&params_pp[SNOR_CMD_PP_8_8_8_DTR],
+					SPINOR_OP_PP_4B, SNOR_PROTO_8_8_8_DTR);
+	}
+	if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_4)
+		spi_nor_set_pp_settings(&params_pp[SNOR_CMD_PP_1_1_4],
+					SPINOR_OP_PP_1_1_4_4B,
+					SNOR_PROTO_1_1_4);
+	if (pp_hwcaps & SNOR_HWCAPS_PP_1_4_4)
+		spi_nor_set_pp_settings(&params_pp[SNOR_CMD_PP_1_4_4],
+					SPINOR_OP_PP_1_4_4_4B,
+					SNOR_PROTO_1_4_4);
+
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+		if (erase_mask & BIT(i))
+			erase_type[i].opcode = (dwords[SFDP_DWORD(2)] >>
+						erase_type[i].idx * 8) & 0xFF;
+		else
+			spi_nor_mask_erase_type(&erase_type[i]);
+	}
+
+	/*
+	 * We set SNOR_F_HAS_4BAIT in order to skip spi_nor_set_4byte_opcodes()
+	 * later because we already did the conversion to 4byte opcodes. Also,
+	 * this latest function implements a legacy quirk for the erase size of
+	 * Spansion memory. However this quirk is no longer needed with new
+	 * SFDP compliant memories.
+	 */
+	params->addr_nbytes = 4;
+	nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
+
+	/* fall through */
+out:
+	kfree(dwords);
+	return ret;
+}
+
+#define PROFILE1_DWORD1_RDSR_ADDR_BYTES		BIT(29)
+#define PROFILE1_DWORD1_RDSR_DUMMY		BIT(28)
+#define PROFILE1_DWORD1_RD_FAST_CMD		GENMASK(15, 8)
+#define PROFILE1_DWORD4_DUMMY_200MHZ		GENMASK(11, 7)
+#define PROFILE1_DWORD5_DUMMY_166MHZ		GENMASK(31, 27)
+#define PROFILE1_DWORD5_DUMMY_133MHZ		GENMASK(21, 17)
+#define PROFILE1_DWORD5_DUMMY_100MHZ		GENMASK(11, 7)
+
+/**
+ * spi_nor_parse_profile1() - parse the xSPI Profile 1.0 table
+ * @nor:		pointer to a 'struct spi_nor'
+ * @profile1_header:	pointer to the 'struct sfdp_parameter_header' describing
+ *			the Profile 1.0 Table length and version.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_profile1(struct spi_nor *nor,
+				  const struct sfdp_parameter_header *profile1_header)
+{
+	u32 *dwords, addr;
+	size_t len;
+	int ret;
+	u8 dummy, opcode;
+
+	len = profile1_header->length * sizeof(*dwords);
+	dwords = kmalloc(len, GFP_KERNEL);
+	if (!dwords)
+		return -ENOMEM;
+
+	addr = SFDP_PARAM_HEADER_PTP(profile1_header);
+	ret = spi_nor_read_sfdp(nor, addr, len, dwords);
+	if (ret)
+		goto out;
+
+	le32_to_cpu_array(dwords, profile1_header->length);
+
+	/* Get 8D-8D-8D fast read opcode and dummy cycles. */
+	opcode = FIELD_GET(PROFILE1_DWORD1_RD_FAST_CMD, dwords[SFDP_DWORD(1)]);
+
+	 /* Set the Read Status Register dummy cycles and dummy address bytes. */
+	if (dwords[SFDP_DWORD(1)] & PROFILE1_DWORD1_RDSR_DUMMY)
+		nor->params->rdsr_dummy = 8;
+	else
+		nor->params->rdsr_dummy = 4;
+
+	if (dwords[SFDP_DWORD(1)] & PROFILE1_DWORD1_RDSR_ADDR_BYTES)
+		nor->params->rdsr_addr_nbytes = 4;
+	else
+		nor->params->rdsr_addr_nbytes = 0;
+
+	/*
+	 * We don't know what speed the controller is running at. Find the
+	 * dummy cycles for the fastest frequency the flash can run at to be
+	 * sure we are never short of dummy cycles. A value of 0 means the
+	 * frequency is not supported.
+	 *
+	 * Default to PROFILE1_DUMMY_DEFAULT if we don't find anything, and let
+	 * flashes set the correct value if needed in their fixup hooks.
+	 */
+	dummy = FIELD_GET(PROFILE1_DWORD4_DUMMY_200MHZ, dwords[SFDP_DWORD(4)]);
+	if (!dummy)
+		dummy = FIELD_GET(PROFILE1_DWORD5_DUMMY_166MHZ,
+				  dwords[SFDP_DWORD(5)]);
+	if (!dummy)
+		dummy = FIELD_GET(PROFILE1_DWORD5_DUMMY_133MHZ,
+				  dwords[SFDP_DWORD(5)]);
+	if (!dummy)
+		dummy = FIELD_GET(PROFILE1_DWORD5_DUMMY_100MHZ,
+				  dwords[SFDP_DWORD(5)]);
+	if (!dummy)
+		dev_dbg(nor->dev,
+			"Can't find dummy cycles from Profile 1.0 table\n");
+
+	/* Round up to an even value to avoid tripping controllers up. */
+	dummy = round_up(dummy, 2);
+
+	/* Update the fast read settings. */
+	nor->params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR;
+	spi_nor_set_read_settings(&nor->params->reads[SNOR_CMD_READ_8_8_8_DTR],
+				  0, dummy, opcode,
+				  SNOR_PROTO_8_8_8_DTR);
+
+	/*
+	 * Page Program is "Required Command" in the xSPI Profile 1.0. Update
+	 * the params->hwcaps.mask here.
+	 */
+	nor->params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8_DTR;
+
+out:
+	kfree(dwords);
+	return ret;
+}
+
+#define SCCR_DWORD22_OCTAL_DTR_EN_VOLATILE		BIT(31)
+
+/**
+ * spi_nor_parse_sccr() - Parse the Status, Control and Configuration Register
+ *                        Map.
+ * @nor:		pointer to a 'struct spi_nor'
+ * @sccr_header:	pointer to the 'struct sfdp_parameter_header' describing
+ *			the SCCR Map table length and version.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_sccr(struct spi_nor *nor,
+			      const struct sfdp_parameter_header *sccr_header)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	u32 *dwords, addr;
+	size_t len;
+	int ret;
+
+	len = sccr_header->length * sizeof(*dwords);
+	dwords = kmalloc(len, GFP_KERNEL);
+	if (!dwords)
+		return -ENOMEM;
+
+	addr = SFDP_PARAM_HEADER_PTP(sccr_header);
+	ret = spi_nor_read_sfdp(nor, addr, len, dwords);
+	if (ret)
+		goto out;
+
+	le32_to_cpu_array(dwords, sccr_header->length);
+
+	/* Address offset for volatile registers (die 0) */
+	if (!params->vreg_offset) {
+		params->vreg_offset = devm_kmalloc(nor->dev, sizeof(*dwords),
+						   GFP_KERNEL);
+		if (!params->vreg_offset) {
+			ret = -ENOMEM;
+			goto out;
+		}
+	}
+	params->vreg_offset[0] = dwords[SFDP_DWORD(1)];
+	params->n_dice = 1;
+
+	if (FIELD_GET(SCCR_DWORD22_OCTAL_DTR_EN_VOLATILE,
+		      dwords[SFDP_DWORD(22)]))
+		nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+
+out:
+	kfree(dwords);
+	return ret;
+}
+
+/**
+ * spi_nor_parse_sccr_mc() - Parse the Status, Control and Configuration
+ *                           Register Map Offsets for Multi-Chip SPI Memory
+ *                           Devices.
+ * @nor:		pointer to a 'struct spi_nor'
+ * @sccr_mc_header:	pointer to the 'struct sfdp_parameter_header' describing
+ *			the SCCR Map offsets table length and version.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_sccr_mc(struct spi_nor *nor,
+				 const struct sfdp_parameter_header *sccr_mc_header)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	u32 *dwords, addr;
+	u8 i, n_dice;
+	size_t len;
+	int ret;
+
+	len = sccr_mc_header->length * sizeof(*dwords);
+	dwords = kmalloc(len, GFP_KERNEL);
+	if (!dwords)
+		return -ENOMEM;
+
+	addr = SFDP_PARAM_HEADER_PTP(sccr_mc_header);
+	ret = spi_nor_read_sfdp(nor, addr, len, dwords);
+	if (ret)
+		goto out;
+
+	le32_to_cpu_array(dwords, sccr_mc_header->length);
+
+	/*
+	 * Pair of DOWRDs (volatile and non-volatile register offsets) per
+	 * additional die. Hence, length = 2 * (number of additional dice).
+	 */
+	n_dice = 1 + sccr_mc_header->length / 2;
+
+	/* Address offset for volatile registers of additional dice */
+	params->vreg_offset =
+			devm_krealloc(nor->dev, params->vreg_offset,
+				      n_dice * sizeof(*dwords),
+				      GFP_KERNEL);
+	if (!params->vreg_offset) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 1; i < n_dice; i++)
+		params->vreg_offset[i] = dwords[SFDP_DWORD(i) * 2];
+
+	params->n_dice = n_dice;
+
+out:
+	kfree(dwords);
+	return ret;
+}
+
+/**
+ * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
+ * after SFDP has been parsed. Called only for flashes that define JESD216 SFDP
+ * tables.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * Used to tweak various flash parameters when information provided by the SFDP
+ * tables are wrong.
+ */
+static int spi_nor_post_sfdp_fixups(struct spi_nor *nor)
+{
+	int ret;
+
+	if (nor->manufacturer && nor->manufacturer->fixups &&
+	    nor->manufacturer->fixups->post_sfdp) {
+		ret = nor->manufacturer->fixups->post_sfdp(nor);
+		if (ret)
+			return ret;
+	}
+
+	if (nor->info->fixups && nor->info->fixups->post_sfdp)
+		return nor->info->fixups->post_sfdp(nor);
+
+	return 0;
+}
+
+/**
+ * spi_nor_check_sfdp_signature() - check for a valid SFDP signature
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * Used to detect if the flash supports the RDSFDP command as well as the
+ * presence of a valid SFDP table.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_check_sfdp_signature(struct spi_nor *nor)
+{
+	u32 signature;
+	int err;
+
+	/* Get the SFDP header. */
+	err = spi_nor_read_sfdp_dma_unsafe(nor, 0, sizeof(signature),
+					   &signature);
+	if (err < 0)
+		return err;
+
+	/* Check the SFDP signature. */
+	if (le32_to_cpu(signature) != SFDP_SIGNATURE)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
+ * @nor:		pointer to a 'struct spi_nor'
+ *
+ * The Serial Flash Discoverable Parameters are described by the JEDEC JESD216
+ * specification. This is a standard which tends to supported by almost all
+ * (Q)SPI memory manufacturers. Those hard-coded tables allow us to learn at
+ * runtime the main parameters needed to perform basic SPI flash operations such
+ * as Fast Read, Page Program or Sector Erase commands.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_parse_sfdp(struct spi_nor *nor)
+{
+	const struct sfdp_parameter_header *param_header, *bfpt_header;
+	struct sfdp_parameter_header *param_headers = NULL;
+	struct sfdp_header header;
+	struct device *dev = nor->dev;
+	struct sfdp *sfdp;
+	size_t sfdp_size;
+	size_t psize;
+	int i, err;
+
+	/* Get the SFDP header. */
+	err = spi_nor_read_sfdp_dma_unsafe(nor, 0, sizeof(header), &header);
+	if (err < 0)
+		return err;
+
+	/* Check the SFDP header version. */
+	if (le32_to_cpu(header.signature) != SFDP_SIGNATURE ||
+	    header.major != SFDP_JESD216_MAJOR)
+		return -EINVAL;
+
+	/*
+	 * Verify that the first and only mandatory parameter header is a
+	 * Basic Flash Parameter Table header as specified in JESD216.
+	 */
+	bfpt_header = &header.bfpt_header;
+	if (SFDP_PARAM_HEADER_ID(bfpt_header) != SFDP_BFPT_ID ||
+	    bfpt_header->major != SFDP_JESD216_MAJOR)
+		return -EINVAL;
+
+	sfdp_size = SFDP_PARAM_HEADER_PTP(bfpt_header) +
+		    SFDP_PARAM_HEADER_PARAM_LEN(bfpt_header);
+
+	/*
+	 * Allocate memory then read all parameter headers with a single
+	 * Read SFDP command. These parameter headers will actually be parsed
+	 * twice: a first time to get the latest revision of the basic flash
+	 * parameter table, then a second time to handle the supported optional
+	 * tables.
+	 * Hence we read the parameter headers once for all to reduce the
+	 * processing time. Also we use kmalloc() instead of devm_kmalloc()
+	 * because we don't need to keep these parameter headers: the allocated
+	 * memory is always released with kfree() before exiting this function.
+	 */
+	if (header.nph) {
+		psize = header.nph * sizeof(*param_headers);
+
+		param_headers = kmalloc(psize, GFP_KERNEL);
+		if (!param_headers)
+			return -ENOMEM;
+
+		err = spi_nor_read_sfdp(nor, sizeof(header),
+					psize, param_headers);
+		if (err < 0) {
+			dev_dbg(dev, "failed to read SFDP parameter headers\n");
+			goto exit;
+		}
+	}
+
+	/*
+	 * Cache the complete SFDP data. It is not (easily) possible to fetch
+	 * SFDP after probe time and we need it for the sysfs access.
+	 */
+	for (i = 0; i < header.nph; i++) {
+		param_header = &param_headers[i];
+		sfdp_size = max_t(size_t, sfdp_size,
+				  SFDP_PARAM_HEADER_PTP(param_header) +
+				  SFDP_PARAM_HEADER_PARAM_LEN(param_header));
+	}
+
+	/*
+	 * Limit the total size to a reasonable value to avoid allocating too
+	 * much memory just of because the flash returned some insane values.
+	 */
+	if (sfdp_size > PAGE_SIZE) {
+		dev_dbg(dev, "SFDP data (%zu) too big, truncating\n",
+			sfdp_size);
+		sfdp_size = PAGE_SIZE;
+	}
+
+	sfdp = devm_kzalloc(dev, sizeof(*sfdp), GFP_KERNEL);
+	if (!sfdp) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	/*
+	 * The SFDP is organized in chunks of DWORDs. Thus, in theory, the
+	 * sfdp_size should be a multiple of DWORDs. But in case a flash
+	 * is not spec compliant, make sure that we have enough space to store
+	 * the complete SFDP data.
+	 */
+	sfdp->num_dwords = DIV_ROUND_UP(sfdp_size, sizeof(*sfdp->dwords));
+	sfdp->dwords = devm_kcalloc(dev, sfdp->num_dwords,
+				    sizeof(*sfdp->dwords), GFP_KERNEL);
+	if (!sfdp->dwords) {
+		err = -ENOMEM;
+		devm_kfree(dev, sfdp);
+		goto exit;
+	}
+
+	err = spi_nor_read_sfdp(nor, 0, sfdp_size, sfdp->dwords);
+	if (err < 0) {
+		dev_dbg(dev, "failed to read SFDP data\n");
+		devm_kfree(dev, sfdp->dwords);
+		devm_kfree(dev, sfdp);
+		goto exit;
+	}
+
+	nor->sfdp = sfdp;
+
+	/*
+	 * Check other parameter headers to get the latest revision of
+	 * the basic flash parameter table.
+	 */
+	for (i = 0; i < header.nph; i++) {
+		param_header = &param_headers[i];
+
+		if (SFDP_PARAM_HEADER_ID(param_header) == SFDP_BFPT_ID &&
+		    param_header->major == SFDP_JESD216_MAJOR &&
+		    (param_header->minor > bfpt_header->minor ||
+		     (param_header->minor == bfpt_header->minor &&
+		      param_header->length > bfpt_header->length)))
+			bfpt_header = param_header;
+	}
+
+	err = spi_nor_parse_bfpt(nor, bfpt_header);
+	if (err)
+		goto exit;
+
+	/* Parse optional parameter tables. */
+	for (i = 0; i < header.nph; i++) {
+		param_header = &param_headers[i];
+
+		switch (SFDP_PARAM_HEADER_ID(param_header)) {
+		case SFDP_SECTOR_MAP_ID:
+			err = spi_nor_parse_smpt(nor, param_header);
+			break;
+
+		case SFDP_4BAIT_ID:
+			err = spi_nor_parse_4bait(nor, param_header);
+			break;
+
+		case SFDP_PROFILE1_ID:
+			err = spi_nor_parse_profile1(nor, param_header);
+			break;
+
+		case SFDP_SCCR_MAP_ID:
+			err = spi_nor_parse_sccr(nor, param_header);
+			break;
+
+		case SFDP_SCCR_MAP_MC_ID:
+			err = spi_nor_parse_sccr_mc(nor, param_header);
+			break;
+
+		default:
+			break;
+		}
+
+		if (err) {
+			dev_warn(dev, "Failed to parse optional parameter table: %04x\n",
+				 SFDP_PARAM_HEADER_ID(param_header));
+			/*
+			 * Let's not drop all information we extracted so far
+			 * if optional table parsers fail. In case of failing,
+			 * each optional parser is responsible to roll back to
+			 * the previously known spi_nor data.
+			 */
+			err = 0;
+		}
+	}
+
+	err = spi_nor_post_sfdp_fixups(nor);
+exit:
+	kfree(param_headers);
+	return err;
+}
diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
new file mode 100644
index 0000000000..6eb99e1cdd
--- /dev/null
+++ b/drivers/mtd/spi-nor/sfdp.h
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#ifndef __LINUX_MTD_SFDP_H
+#define __LINUX_MTD_SFDP_H
+
+/* SFDP revisions */
+#define SFDP_JESD216_MAJOR	1
+#define SFDP_JESD216_MINOR	0
+#define SFDP_JESD216A_MINOR	5
+#define SFDP_JESD216B_MINOR	6
+
+/* SFDP DWORDS are indexed from 1 but C arrays are indexed from 0. */
+#define SFDP_DWORD(i)		((i) - 1)
+#define SFDP_MASK_CHECK(dword, mask)		(((dword) & (mask)) == (mask))
+
+/* Basic Flash Parameter Table */
+
+/* JESD216 rev D defines a Basic Flash Parameter Table of 20 DWORDs. */
+#define BFPT_DWORD_MAX		20
+
+struct sfdp_bfpt {
+	u32	dwords[BFPT_DWORD_MAX];
+};
+
+/* The first version of JESD216 defined only 9 DWORDs. */
+#define BFPT_DWORD_MAX_JESD216			9
+#define BFPT_DWORD_MAX_JESD216B			16
+
+/* 1st DWORD. */
+#define BFPT_DWORD1_FAST_READ_1_1_2		BIT(16)
+#define BFPT_DWORD1_ADDRESS_BYTES_MASK		GENMASK(18, 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY	(0x0UL << 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4	(0x1UL << 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY	(0x2UL << 17)
+#define BFPT_DWORD1_DTR				BIT(19)
+#define BFPT_DWORD1_FAST_READ_1_2_2		BIT(20)
+#define BFPT_DWORD1_FAST_READ_1_4_4		BIT(21)
+#define BFPT_DWORD1_FAST_READ_1_1_4		BIT(22)
+
+/* 5th DWORD. */
+#define BFPT_DWORD5_FAST_READ_2_2_2		BIT(0)
+#define BFPT_DWORD5_FAST_READ_4_4_4		BIT(4)
+
+/* 11th DWORD. */
+#define BFPT_DWORD11_PAGE_SIZE_SHIFT		4
+#define BFPT_DWORD11_PAGE_SIZE_MASK		GENMASK(7, 4)
+
+/* 15th DWORD. */
+
+/*
+ * (from JESD216 rev B)
+ * Quad Enable Requirements (QER):
+ * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
+ *         reads based on instruction. DQ3/HOLD# functions are hold during
+ *         instruction phase.
+ * - 001b: QE is bit 1 of status register 2. It is set via Write Status with
+ *         two data bytes where bit 1 of the second byte is one.
+ *         [...]
+ *         Writing only one byte to the status register has the side-effect of
+ *         clearing status register 2, including the QE bit. The 100b code is
+ *         used if writing one byte to the status register does not modify
+ *         status register 2.
+ * - 010b: QE is bit 6 of status register 1. It is set via Write Status with
+ *         one data byte where bit 6 is one.
+ *         [...]
+ * - 011b: QE is bit 7 of status register 2. It is set via Write status
+ *         register 2 instruction 3Eh with one data byte where bit 7 is one.
+ *         [...]
+ *         The status register 2 is read using instruction 3Fh.
+ * - 100b: QE is bit 1 of status register 2. It is set via Write Status with
+ *         two data bytes where bit 1 of the second byte is one.
+ *         [...]
+ *         In contrast to the 001b code, writing one byte to the status
+ *         register does not modify status register 2.
+ * - 101b: QE is bit 1 of status register 2. Status register 1 is read using
+ *         Read Status instruction 05h. Status register2 is read using
+ *         instruction 35h. QE is set via Write Status instruction 01h with
+ *         two data bytes where bit 1 of the second byte is one.
+ *         [...]
+ */
+#define BFPT_DWORD15_QER_MASK			GENMASK(22, 20)
+#define BFPT_DWORD15_QER_NONE			(0x0UL << 20) /* Micron */
+#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY		(0x1UL << 20)
+#define BFPT_DWORD15_QER_SR1_BIT6		(0x2UL << 20) /* Macronix */
+#define BFPT_DWORD15_QER_SR2_BIT7		(0x3UL << 20)
+#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD		(0x4UL << 20)
+#define BFPT_DWORD15_QER_SR2_BIT1		(0x5UL << 20) /* Spansion */
+
+#define BFPT_DWORD16_EN4B_MASK			GENMASK(31, 24)
+#define BFPT_DWORD16_EN4B_ALWAYS_4B		BIT(30)
+#define BFPT_DWORD16_EN4B_4B_OPCODES		BIT(29)
+#define BFPT_DWORD16_EN4B_16BIT_NV_CR		BIT(28)
+#define BFPT_DWORD16_EN4B_BRWR			BIT(27)
+#define BFPT_DWORD16_EN4B_WREAR			BIT(26)
+#define BFPT_DWORD16_EN4B_WREN_EN4B		BIT(25)
+#define BFPT_DWORD16_EN4B_EN4B			BIT(24)
+#define BFPT_DWORD16_EX4B_MASK			GENMASK(18, 14)
+#define BFPT_DWORD16_EX4B_16BIT_NV_CR		BIT(18)
+#define BFPT_DWORD16_EX4B_BRWR			BIT(17)
+#define BFPT_DWORD16_EX4B_WREAR			BIT(16)
+#define BFPT_DWORD16_EX4B_WREN_EX4B		BIT(15)
+#define BFPT_DWORD16_EX4B_EX4B			BIT(14)
+#define BFPT_DWORD16_4B_ADDR_MODE_MASK			\
+	(BFPT_DWORD16_EN4B_MASK | BFPT_DWORD16_EX4B_MASK)
+#define BFPT_DWORD16_4B_ADDR_MODE_16BIT_NV_CR		\
+	(BFPT_DWORD16_EN4B_16BIT_NV_CR | BFPT_DWORD16_EX4B_16BIT_NV_CR)
+#define BFPT_DWORD16_4B_ADDR_MODE_BRWR			\
+	(BFPT_DWORD16_EN4B_BRWR | BFPT_DWORD16_EX4B_BRWR)
+#define BFPT_DWORD16_4B_ADDR_MODE_WREAR			\
+	(BFPT_DWORD16_EN4B_WREAR | BFPT_DWORD16_EX4B_WREAR)
+#define BFPT_DWORD16_4B_ADDR_MODE_WREN_EN4B_EX4B	\
+	(BFPT_DWORD16_EN4B_WREN_EN4B | BFPT_DWORD16_EX4B_WREN_EX4B)
+#define BFPT_DWORD16_4B_ADDR_MODE_EN4B_EX4B		\
+	(BFPT_DWORD16_EN4B_EN4B | BFPT_DWORD16_EX4B_EX4B)
+#define BFPT_DWORD16_SWRST_EN_RST		BIT(12)
+
+#define BFPT_DWORD18_CMD_EXT_MASK		GENMASK(30, 29)
+#define BFPT_DWORD18_CMD_EXT_REP		(0x0UL << 29) /* Repeat */
+#define BFPT_DWORD18_CMD_EXT_INV		(0x1UL << 29) /* Invert */
+#define BFPT_DWORD18_CMD_EXT_RES		(0x2UL << 29) /* Reserved */
+#define BFPT_DWORD18_CMD_EXT_16B		(0x3UL << 29) /* 16-bit opcode */
+
+struct sfdp_parameter_header {
+	u8		id_lsb;
+	u8		minor;
+	u8		major;
+	u8		length; /* in double words */
+	u8		parameter_table_pointer[3]; /* byte address */
+	u8		id_msb;
+};
+
+#endif /* __LINUX_MTD_SFDP_H */
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
new file mode 100644
index 0000000000..709822fced
--- /dev/null
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -0,0 +1,989 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+/* flash_info mfr_flag. Used to clear sticky prorietary SR bits. */
+#define USE_CLSR	BIT(0)
+#define USE_CLPEF	BIT(1)
+
+#define SPINOR_OP_CLSR		0x30	/* Clear status register 1 */
+#define SPINOR_OP_CLPEF		0x82	/* Clear program/erase failure flags */
+#define SPINOR_OP_RD_ANY_REG			0x65	/* Read any register */
+#define SPINOR_OP_WR_ANY_REG			0x71	/* Write any register */
+#define SPINOR_REG_CYPRESS_VREG			0x00800000
+#define SPINOR_REG_CYPRESS_STR1			0x0
+#define SPINOR_REG_CYPRESS_STR1V					\
+	(SPINOR_REG_CYPRESS_VREG + SPINOR_REG_CYPRESS_STR1)
+#define SPINOR_REG_CYPRESS_CFR1			0x2
+#define SPINOR_REG_CYPRESS_CFR1_QUAD_EN		BIT(1)	/* Quad Enable */
+#define SPINOR_REG_CYPRESS_CFR2			0x3
+#define SPINOR_REG_CYPRESS_CFR2V					\
+	(SPINOR_REG_CYPRESS_VREG + SPINOR_REG_CYPRESS_CFR2)
+#define SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK	GENMASK(3, 0)
+#define SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24	0xb
+#define SPINOR_REG_CYPRESS_CFR2_ADRBYT		BIT(7)
+#define SPINOR_REG_CYPRESS_CFR3			0x4
+#define SPINOR_REG_CYPRESS_CFR3_PGSZ		BIT(4) /* Page size. */
+#define SPINOR_REG_CYPRESS_CFR5			0x6
+#define SPINOR_REG_CYPRESS_CFR5_BIT6		BIT(6)
+#define SPINOR_REG_CYPRESS_CFR5_DDR		BIT(1)
+#define SPINOR_REG_CYPRESS_CFR5_OPI		BIT(0)
+#define SPINOR_REG_CYPRESS_CFR5_OCT_DTR_EN				\
+	(SPINOR_REG_CYPRESS_CFR5_BIT6 |	SPINOR_REG_CYPRESS_CFR5_DDR |	\
+	 SPINOR_REG_CYPRESS_CFR5_OPI)
+#define SPINOR_REG_CYPRESS_CFR5_OCT_DTR_DS	SPINOR_REG_CYPRESS_CFR5_BIT6
+#define SPINOR_OP_CYPRESS_RD_FAST		0xee
+#define SPINOR_REG_CYPRESS_ARCFN		0x00000006
+
+/* Cypress SPI NOR flash operations. */
+#define CYPRESS_NOR_WR_ANY_REG_OP(naddr, addr, ndata, buf)		\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 0),		\
+		   SPI_MEM_OP_ADDR(naddr, addr, 0),			\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(ndata, buf, 0))
+
+#define CYPRESS_NOR_RD_ANY_REG_OP(naddr, addr, ndummy, buf)		\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 0),		\
+		   SPI_MEM_OP_ADDR(naddr, addr, 0),			\
+		   SPI_MEM_OP_DUMMY(ndummy, 0),				\
+		   SPI_MEM_OP_DATA_IN(1, buf, 0))
+
+#define SPANSION_OP(opcode)						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0),				\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+/**
+ * struct spansion_nor_params - Spansion private parameters.
+ * @clsr:	Clear Status Register or Clear Program and Erase Failure Flag
+ *		opcode.
+ */
+struct spansion_nor_params {
+	u8 clsr;
+};
+
+/**
+ * spansion_nor_clear_sr() - Clear the Status Register.
+ * @nor:	pointer to 'struct spi_nor'.
+ */
+static void spansion_nor_clear_sr(struct spi_nor *nor)
+{
+	const struct spansion_nor_params *priv_params = nor->params->priv;
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = SPANSION_OP(priv_params->clsr);
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_CLSR,
+						       NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d clearing SR\n", ret);
+}
+
+static int cypress_nor_sr_ready_and_clear_reg(struct spi_nor *nor, u64 addr)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	struct spi_mem_op op =
+		CYPRESS_NOR_RD_ANY_REG_OP(params->addr_mode_nbytes, addr,
+					  0, nor->bouncebuf);
+	int ret;
+
+	if (nor->reg_proto == SNOR_PROTO_8_8_8_DTR) {
+		op.dummy.nbytes = params->rdsr_dummy;
+		op.data.nbytes = 2;
+	}
+
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & (SR_E_ERR | SR_P_ERR)) {
+		if (nor->bouncebuf[0] & SR_E_ERR)
+			dev_err(nor->dev, "Erase Error occurred\n");
+		else
+			dev_err(nor->dev, "Programming Error occurred\n");
+
+		spansion_nor_clear_sr(nor);
+
+		ret = spi_nor_write_disable(nor);
+		if (ret)
+			return ret;
+
+		return -EIO;
+	}
+
+	return !(nor->bouncebuf[0] & SR_WIP);
+}
+/**
+ * cypress_nor_sr_ready_and_clear() - Query the Status Register of each die by
+ * using Read Any Register command to see if the whole flash is ready for new
+ * commands and clear it if there are any errors.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
+ */
+static int cypress_nor_sr_ready_and_clear(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	u64 addr;
+	int ret;
+	u8 i;
+
+	for (i = 0; i < params->n_dice; i++) {
+		addr = params->vreg_offset[i] + SPINOR_REG_CYPRESS_STR1;
+		ret = cypress_nor_sr_ready_and_clear_reg(nor, addr);
+		if (ret < 0)
+			return ret;
+		else if (ret == 0)
+			return 0;
+	}
+
+	return 1;
+}
+
+static int cypress_nor_set_memlat(struct spi_nor *nor, u64 addr)
+{
+	struct spi_mem_op op;
+	u8 *buf = nor->bouncebuf;
+	int ret;
+	u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;
+
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes, addr, 0, buf);
+
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	/* Use 24 dummy cycles for memory array reads. */
+	*buf &= ~SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK;
+	*buf |= FIELD_PREP(SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK,
+			   SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24);
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes, addr, 1, buf);
+
+	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	nor->read_dummy = 24;
+
+	return 0;
+}
+
+static int cypress_nor_set_octal_dtr_bits(struct spi_nor *nor, u64 addr)
+{
+	struct spi_mem_op op;
+	u8 *buf = nor->bouncebuf;
+
+	/* Set the octal and DTR enable bits. */
+	buf[0] = SPINOR_REG_CYPRESS_CFR5_OCT_DTR_EN;
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_WR_ANY_REG_OP(nor->params->addr_mode_nbytes,
+					  addr, 1, buf);
+
+	return spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+}
+
+static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
+{
+	const struct spi_nor_flash_parameter *params = nor->params;
+	u8 *buf = nor->bouncebuf;
+	u64 addr;
+	int i, ret;
+
+	for (i = 0; i < params->n_dice; i++) {
+		addr = params->vreg_offset[i] + SPINOR_REG_CYPRESS_CFR2;
+		ret = cypress_nor_set_memlat(nor, addr);
+		if (ret)
+			return ret;
+
+		addr = params->vreg_offset[i] + SPINOR_REG_CYPRESS_CFR5;
+		ret = cypress_nor_set_octal_dtr_bits(nor, addr);
+		if (ret)
+			return ret;
+	}
+
+	/* Read flash ID to make sure the switch was successful. */
+	ret = spi_nor_read_id(nor, nor->addr_nbytes, 3, buf,
+			      SNOR_PROTO_8_8_8_DTR);
+	if (ret) {
+		dev_dbg(nor->dev, "error %d reading JEDEC ID after enabling 8D-8D-8D mode\n", ret);
+		return ret;
+	}
+
+	if (memcmp(buf, nor->info->id, nor->info->id_len))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int cypress_nor_set_single_spi_bits(struct spi_nor *nor, u64 addr)
+{
+	struct spi_mem_op op;
+	u8 *buf = nor->bouncebuf;
+
+	/*
+	 * The register is 1-byte wide, but 1-byte transactions are not allowed
+	 * in 8D-8D-8D mode. Since there is no register at the next location,
+	 * just initialize the value to 0 and let the transaction go on.
+	 */
+	buf[0] = SPINOR_REG_CYPRESS_CFR5_OCT_DTR_DS;
+	buf[1] = 0;
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_WR_ANY_REG_OP(nor->addr_nbytes, addr, 2, buf);
+	return spi_nor_write_any_volatile_reg(nor, &op, SNOR_PROTO_8_8_8_DTR);
+}
+
+static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
+{
+	const struct spi_nor_flash_parameter *params = nor->params;
+	u8 *buf = nor->bouncebuf;
+	u64 addr;
+	int i, ret;
+
+	for (i = 0; i < params->n_dice; i++) {
+		addr = params->vreg_offset[i] + SPINOR_REG_CYPRESS_CFR5;
+		ret = cypress_nor_set_single_spi_bits(nor, addr);
+		if (ret)
+			return ret;
+	}
+
+	/* Read flash ID to make sure the switch was successful. */
+	ret = spi_nor_read_id(nor, 0, 0, buf, SNOR_PROTO_1_1_1);
+	if (ret) {
+		dev_dbg(nor->dev, "error %d reading JEDEC ID after disabling 8D-8D-8D mode\n", ret);
+		return ret;
+	}
+
+	if (memcmp(buf, nor->info->id, nor->info->id_len))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int cypress_nor_quad_enable_volatile_reg(struct spi_nor *nor, u64 addr)
+{
+	struct spi_mem_op op;
+	u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;
+	u8 cfr1v_written;
+	int ret;
+
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes, addr, 0,
+					  nor->bouncebuf);
+
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR1_QUAD_EN)
+		return 0;
+
+	/* Update the Quad Enable bit. */
+	nor->bouncebuf[0] |= SPINOR_REG_CYPRESS_CFR1_QUAD_EN;
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes, addr, 1,
+					  nor->bouncebuf);
+	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	cfr1v_written = nor->bouncebuf[0];
+
+	/* Read back and check it. */
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes, addr, 0,
+					  nor->bouncebuf);
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] != cfr1v_written) {
+		dev_err(nor->dev, "CFR1: Read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * cypress_nor_quad_enable_volatile() - enable Quad I/O mode in volatile
+ *                                      register.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * It is recommended to update volatile registers in the field application due
+ * to a risk of the non-volatile registers corruption by power interrupt. This
+ * function sets Quad Enable bit in CFR1 volatile. If users set the Quad Enable
+ * bit in the CFR1 non-volatile in advance (typically by a Flash programmer
+ * before mounting Flash on PCB), the Quad Enable bit in the CFR1 volatile is
+ * also set during Flash power-up.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_quad_enable_volatile(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	u64 addr;
+	u8 i;
+	int ret;
+
+	for (i = 0; i < params->n_dice; i++) {
+		addr = params->vreg_offset[i] + SPINOR_REG_CYPRESS_CFR1;
+		ret = cypress_nor_quad_enable_volatile_reg(nor, addr);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * cypress_nor_determine_addr_mode_by_sr1() - Determine current address mode
+ *                                            (3 or 4-byte) by querying status
+ *                                            register 1 (SR1).
+ * @nor:		pointer to a 'struct spi_nor'
+ * @addr_mode:		ponter to a buffer where we return the determined
+ *			address mode.
+ *
+ * This function tries to determine current address mode by comparing SR1 value
+ * from RDSR1(no address), RDAR(3-byte address), and RDAR(4-byte address).
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_determine_addr_mode_by_sr1(struct spi_nor *nor,
+						  u8 *addr_mode)
+{
+	struct spi_mem_op op =
+		CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_STR1V, 0,
+					  nor->bouncebuf);
+	bool is3byte, is4byte;
+	int ret;
+
+	ret = spi_nor_read_sr(nor, &nor->bouncebuf[1]);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	is3byte = (nor->bouncebuf[0] == nor->bouncebuf[1]);
+
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(4, SPINOR_REG_CYPRESS_STR1V, 0,
+					  nor->bouncebuf);
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	is4byte = (nor->bouncebuf[0] == nor->bouncebuf[1]);
+
+	if (is3byte == is4byte)
+		return -EIO;
+	if (is3byte)
+		*addr_mode = 3;
+	else
+		*addr_mode = 4;
+
+	return 0;
+}
+
+/**
+ * cypress_nor_set_addr_mode_nbytes() - Set the number of address bytes mode of
+ *                                      current address mode.
+ * @nor:		pointer to a 'struct spi_nor'
+ *
+ * Determine current address mode by reading SR1 with different methods, then
+ * query CFR2V[7] to confirm. If determination is failed, force enter to 4-byte
+ * address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_set_addr_mode_nbytes(struct spi_nor *nor)
+{
+	struct spi_mem_op op;
+	u8 addr_mode;
+	int ret;
+
+	/*
+	 * Read SR1 by RDSR1 and RDAR(3- AND 4-byte addr). Use write enable
+	 * that sets bit-1 in SR1.
+	 */
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+	ret = cypress_nor_determine_addr_mode_by_sr1(nor, &addr_mode);
+	if (ret) {
+		ret = spi_nor_set_4byte_addr_mode(nor, true);
+		if (ret)
+			return ret;
+		return spi_nor_write_disable(nor);
+	}
+	ret = spi_nor_write_disable(nor);
+	if (ret)
+		return ret;
+
+	/*
+	 * Query CFR2V and make sure no contradiction between determined address
+	 * mode and CFR2V[7].
+	 */
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(addr_mode, SPINOR_REG_CYPRESS_CFR2V,
+					  0, nor->bouncebuf);
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR2_ADRBYT) {
+		if (addr_mode != 4)
+			return spi_nor_set_4byte_addr_mode(nor, true);
+	} else {
+		if (addr_mode != 3)
+			return spi_nor_set_4byte_addr_mode(nor, true);
+	}
+
+	nor->params->addr_nbytes = addr_mode;
+	nor->params->addr_mode_nbytes = addr_mode;
+
+	return 0;
+}
+
+/**
+ * cypress_nor_get_page_size() - Get flash page size configuration.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * The BFPT table advertises a 512B or 256B page size depending on part but the
+ * page size is actually configurable (with the default being 256B). Read from
+ * CFR3V[4] and set the correct size.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_get_page_size(struct spi_nor *nor)
+{
+	struct spi_mem_op op =
+		CYPRESS_NOR_RD_ANY_REG_OP(nor->params->addr_mode_nbytes,
+					  0, 0, nor->bouncebuf);
+	struct spi_nor_flash_parameter *params = nor->params;
+	int ret;
+	u8 i;
+
+	/*
+	 * Use the minimum common page size configuration. Programming 256-byte
+	 * under 512-byte page size configuration is safe.
+	 */
+	params->page_size = 256;
+	for (i = 0; i < params->n_dice; i++) {
+		op.addr.val = params->vreg_offset[i] + SPINOR_REG_CYPRESS_CFR3;
+
+		ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+		if (ret)
+			return ret;
+
+		if (!(nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3_PGSZ))
+			return 0;
+	}
+
+	params->page_size = 512;
+
+	return 0;
+}
+
+static void cypress_nor_ecc_init(struct spi_nor *nor)
+{
+	/*
+	 * Programming is supported only in 16-byte ECC data unit granularity.
+	 * Byte-programming, bit-walking, or multiple program operations to the
+	 * same ECC data unit without an erase are not allowed.
+	 */
+	nor->params->writesize = 16;
+	nor->flags |= SNOR_F_ECC;
+}
+
+static int
+s25fs256t_post_bfpt_fixup(struct spi_nor *nor,
+			  const struct sfdp_parameter_header *bfpt_header,
+			  const struct sfdp_bfpt *bfpt)
+{
+	struct spi_mem_op op;
+	int ret;
+
+	ret = cypress_nor_set_addr_mode_nbytes(nor);
+	if (ret)
+		return ret;
+
+	/* Read Architecture Configuration Register (ARCFN) */
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(nor->params->addr_mode_nbytes,
+					  SPINOR_REG_CYPRESS_ARCFN, 1,
+					  nor->bouncebuf);
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	/* ARCFN value must be 0 if uniform sector is selected  */
+	if (nor->bouncebuf[0])
+		return -ENODEV;
+
+	return 0;
+}
+
+static int s25fs256t_post_sfdp_fixup(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+
+	/*
+	 * S25FS256T does not define the SCCR map, but we would like to use the
+	 * same code base for both single and multi chip package devices, thus
+	 * set the vreg_offset and n_dice to be able to do so.
+	 */
+	params->vreg_offset = devm_kmalloc(nor->dev, sizeof(u32), GFP_KERNEL);
+	if (!params->vreg_offset)
+		return -ENOMEM;
+
+	params->vreg_offset[0] = SPINOR_REG_CYPRESS_VREG;
+	params->n_dice = 1;
+
+	/* PP_1_1_4_4B is supported but missing in 4BAIT. */
+	params->hwcaps.mask |= SNOR_HWCAPS_PP_1_1_4;
+	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_1_1_4],
+				SPINOR_OP_PP_1_1_4_4B,
+				SNOR_PROTO_1_1_4);
+
+	return cypress_nor_get_page_size(nor);
+}
+
+static int s25fs256t_late_init(struct spi_nor *nor)
+{
+	cypress_nor_ecc_init(nor);
+
+	return 0;
+}
+
+static struct spi_nor_fixups s25fs256t_fixups = {
+	.post_bfpt = s25fs256t_post_bfpt_fixup,
+	.post_sfdp = s25fs256t_post_sfdp_fixup,
+	.late_init = s25fs256t_late_init,
+};
+
+static int
+s25hx_t_post_bfpt_fixup(struct spi_nor *nor,
+			const struct sfdp_parameter_header *bfpt_header,
+			const struct sfdp_bfpt *bfpt)
+{
+	int ret;
+
+	ret = cypress_nor_set_addr_mode_nbytes(nor);
+	if (ret)
+		return ret;
+
+	/* Replace Quad Enable with volatile version */
+	nor->params->quad_enable = cypress_nor_quad_enable_volatile;
+
+	return 0;
+}
+
+static int s25hx_t_post_sfdp_fixup(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	struct spi_nor_erase_type *erase_type = params->erase_map.erase_type;
+	unsigned int i;
+
+	if (!params->n_dice || !params->vreg_offset) {
+		dev_err(nor->dev, "%s failed. The volatile register offset could not be retrieved from SFDP.\n",
+			__func__);
+		return -EOPNOTSUPP;
+	}
+
+	/* The 2 Gb parts duplicate info and advertise 4 dice instead of 2. */
+	if (params->size == SZ_256M)
+		params->n_dice = 2;
+
+	/*
+	 * In some parts, 3byte erase opcodes are advertised by 4BAIT.
+	 * Convert them to 4byte erase opcodes.
+	 */
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+		switch (erase_type[i].opcode) {
+		case SPINOR_OP_SE:
+			erase_type[i].opcode = SPINOR_OP_SE_4B;
+			break;
+		case SPINOR_OP_BE_4K:
+			erase_type[i].opcode = SPINOR_OP_BE_4K_4B;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return cypress_nor_get_page_size(nor);
+}
+
+static int s25hx_t_late_init(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+
+	/* Fast Read 4B requires mode cycles */
+	params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
+	params->ready = cypress_nor_sr_ready_and_clear;
+	cypress_nor_ecc_init(nor);
+
+	return 0;
+}
+
+static struct spi_nor_fixups s25hx_t_fixups = {
+	.post_bfpt = s25hx_t_post_bfpt_fixup,
+	.post_sfdp = s25hx_t_post_sfdp_fixup,
+	.late_init = s25hx_t_late_init,
+};
+
+/**
+ * cypress_nor_set_octal_dtr() - Enable or disable octal DTR on Cypress flashes.
+ * @nor:		pointer to a 'struct spi_nor'
+ * @enable:              whether to enable or disable Octal DTR
+ *
+ * This also sets the memory access latency cycles to 24 to allow the flash to
+ * run at up to 200MHz.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_set_octal_dtr(struct spi_nor *nor, bool enable)
+{
+	return enable ? cypress_nor_octal_dtr_en(nor) :
+			cypress_nor_octal_dtr_dis(nor);
+}
+
+static int s28hx_t_post_sfdp_fixup(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+
+	if (!params->n_dice || !params->vreg_offset) {
+		dev_err(nor->dev, "%s failed. The volatile register offset could not be retrieved from SFDP.\n",
+			__func__);
+		return -EOPNOTSUPP;
+	}
+
+	/* The 2 Gb parts duplicate info and advertise 4 dice instead of 2. */
+	if (params->size == SZ_256M)
+		params->n_dice = 2;
+
+	/*
+	 * On older versions of the flash the xSPI Profile 1.0 table has the
+	 * 8D-8D-8D Fast Read opcode as 0x00. But it actually should be 0xEE.
+	 */
+	if (params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode == 0)
+		params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode =
+			SPINOR_OP_CYPRESS_RD_FAST;
+
+	/* This flash is also missing the 4-byte Page Program opcode bit. */
+	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
+				SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1);
+	/*
+	 * Since xSPI Page Program opcode is backward compatible with
+	 * Legacy SPI, use Legacy SPI opcode there as well.
+	 */
+	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_8_8_8_DTR],
+				SPINOR_OP_PP_4B, SNOR_PROTO_8_8_8_DTR);
+
+	/*
+	 * The xSPI Profile 1.0 table advertises the number of additional
+	 * address bytes needed for Read Status Register command as 0 but the
+	 * actual value for that is 4.
+	 */
+	params->rdsr_addr_nbytes = 4;
+
+	return cypress_nor_get_page_size(nor);
+}
+
+static int s28hx_t_post_bfpt_fixup(struct spi_nor *nor,
+				   const struct sfdp_parameter_header *bfpt_header,
+				   const struct sfdp_bfpt *bfpt)
+{
+	return cypress_nor_set_addr_mode_nbytes(nor);
+}
+
+static int s28hx_t_late_init(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+
+	params->set_octal_dtr = cypress_nor_set_octal_dtr;
+	params->ready = cypress_nor_sr_ready_and_clear;
+	cypress_nor_ecc_init(nor);
+
+	return 0;
+}
+
+static const struct spi_nor_fixups s28hx_t_fixups = {
+	.post_sfdp = s28hx_t_post_sfdp_fixup,
+	.post_bfpt = s28hx_t_post_bfpt_fixup,
+	.late_init = s28hx_t_late_init,
+};
+
+static int
+s25fs_s_nor_post_bfpt_fixups(struct spi_nor *nor,
+			     const struct sfdp_parameter_header *bfpt_header,
+			     const struct sfdp_bfpt *bfpt)
+{
+	/*
+	 * The S25FS-S chip family reports 512-byte pages in BFPT but
+	 * in reality the write buffer still wraps at the safe default
+	 * of 256 bytes.  Overwrite the page size advertised by BFPT
+	 * to get the writes working.
+	 */
+	nor->params->page_size = 256;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups s25fs_s_nor_fixups = {
+	.post_bfpt = s25fs_s_nor_post_bfpt_fixups,
+};
+
+static const struct flash_info spansion_nor_parts[] = {
+	/* Spansion/Cypress -- single (large) sector size only, at least
+	 * for the chips listed here (without boot sectors).
+	 */
+	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_CLSR)
+	},
+	{ "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_CLSR)
+	},
+	{ "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128)
+		NO_SFDP_FLAGS(SPI_NOR_SKIP_SFDP | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_CLSR)
+	},
+	{ "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_CLSR)
+	},
+	{ "s25fl512s",  INFO6(0x010220, 0x4d0080, 256 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_CLSR)
+	},
+	{ "s25fs128s1", INFO6(0x012018, 0x4d0181, 64 * 1024, 256)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_CLSR)
+		.fixups = &s25fs_s_nor_fixups, },
+	{ "s25fs256s0", INFO6(0x010219, 0x4d0081, 256 * 1024, 128)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_CLSR)
+	},
+	{ "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_CLSR)
+	},
+	{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_CLSR)
+		.fixups = &s25fs_s_nor_fixups, },
+	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64) },
+	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256) },
+	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_CLSR)
+	},
+	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		MFR_FLAGS(USE_CLSR)
+	},
+	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8) },
+	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16) },
+	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32) },
+	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64) },
+	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128) },
+	{ "s25fl004k",  INFO(0xef4013,      0,  64 * 1024,   8)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "s25fl116k",  INFO(0x014015,      0,  64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "s25fl132k",  INFO(0x014016,      0,  64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "s25fl164k",  INFO(0x014017,      0,  64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "s25fl204k",  INFO(0x014013,      0,  64 * 1024,   8)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "s25fl208k",  INFO(0x014014,      0,  64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "s25fl064l",  INFO(0x016017,      0,  64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "s25fl128l",  INFO(0x016018,      0,  64 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "s25fl256l",  INFO(0x016019,      0,  64 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "s25fs256t",  INFO6(0x342b19, 0x0f0890, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		.fixups = &s25fs256t_fixups },
+	{ "s25hl512t",  INFO6(0x342a1a, 0x0f0390, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		.fixups = &s25hx_t_fixups },
+	{ "s25hl01gt",  INFO6(0x342a1b, 0x0f0390, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		.fixups = &s25hx_t_fixups },
+	{ "s25hl02gt",  INFO6(0x342a1c, 0x0f0090, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		FLAGS(NO_CHIP_ERASE)
+		.fixups = &s25hx_t_fixups },
+	{ "s25hs512t",  INFO6(0x342b1a, 0x0f0390, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		.fixups = &s25hx_t_fixups },
+	{ "s25hs01gt",  INFO6(0x342b1b, 0x0f0390, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		.fixups = &s25hx_t_fixups },
+	{ "s25hs02gt",  INFO6(0x342b1c, 0x0f0090, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		FLAGS(NO_CHIP_ERASE)
+		.fixups = &s25hx_t_fixups },
+	{ "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
+		FLAGS(SPI_NOR_NO_ERASE) },
+	{ "s28hl512t",   INFO(0x345a1a,      0, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		.fixups = &s28hx_t_fixups,
+	},
+	{ "s28hl01gt",   INFO(0x345a1b,      0, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		.fixups = &s28hx_t_fixups,
+	},
+	{ "s28hs512t",   INFO(0x345b1a,      0, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		.fixups = &s28hx_t_fixups,
+	},
+	{ "s28hs01gt",   INFO(0x345b1b,      0, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		.fixups = &s28hx_t_fixups,
+	},
+	{ "s28hs02gt",   INFO(0x345b1c,      0, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		.fixups = &s28hx_t_fixups,
+	},
+};
+
+/**
+ * spansion_nor_sr_ready_and_clear() - Query the Status Register to see if the
+ * flash is ready for new commands and clear it if there are any errors.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
+ */
+static int spansion_nor_sr_ready_and_clear(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & (SR_E_ERR | SR_P_ERR)) {
+		if (nor->bouncebuf[0] & SR_E_ERR)
+			dev_err(nor->dev, "Erase Error occurred\n");
+		else
+			dev_err(nor->dev, "Programming Error occurred\n");
+
+		spansion_nor_clear_sr(nor);
+
+		/*
+		 * WEL bit remains set to one when an erase or page program
+		 * error occurs. Issue a Write Disable command to protect
+		 * against inadvertent writes that can possibly corrupt the
+		 * contents of the memory.
+		 */
+		ret = spi_nor_write_disable(nor);
+		if (ret)
+			return ret;
+
+		return -EIO;
+	}
+
+	return !(nor->bouncebuf[0] & SR_WIP);
+}
+
+static int spansion_nor_late_init(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	struct spansion_nor_params *priv_params;
+	u8 mfr_flags = nor->info->mfr_flags;
+
+	if (params->size > SZ_16M) {
+		nor->flags |= SNOR_F_4B_OPCODES;
+		/* No small sector erase for 4-byte command set */
+		nor->erase_opcode = SPINOR_OP_SE;
+		nor->mtd.erasesize = nor->info->sector_size;
+	}
+
+	if (mfr_flags & (USE_CLSR | USE_CLPEF)) {
+		priv_params = devm_kmalloc(nor->dev, sizeof(*priv_params),
+					   GFP_KERNEL);
+		if (!priv_params)
+			return -ENOMEM;
+
+		if (mfr_flags & USE_CLSR)
+			priv_params->clsr = SPINOR_OP_CLSR;
+		else if (mfr_flags & USE_CLPEF)
+			priv_params->clsr = SPINOR_OP_CLPEF;
+
+		params->priv = priv_params;
+		params->ready = spansion_nor_sr_ready_and_clear;
+	}
+
+	return 0;
+}
+
+static const struct spi_nor_fixups spansion_nor_fixups = {
+	.late_init = spansion_nor_late_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_spansion = {
+	.name = "spansion",
+	.parts = spansion_nor_parts,
+	.nparts = ARRAY_SIZE(spansion_nor_parts),
+	.fixups = &spansion_nor_fixups,
+};
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
new file mode 100644
index 0000000000..197d2c1101
--- /dev/null
+++ b/drivers/mtd/spi-nor/sst.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+/* SST flash_info mfr_flag. Used to specify SST byte programming. */
+#define SST_WRITE		BIT(0)
+
+#define SST26VF_CR_BPNV		BIT(3)
+
+static int sst26vf_nor_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	return -EOPNOTSUPP;
+}
+
+static int sst26vf_nor_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	int ret;
+
+	/* We only support unlocking the entire flash array. */
+	if (ofs != 0 || len != nor->params->size)
+		return -EINVAL;
+
+	ret = spi_nor_read_cr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	if (!(nor->bouncebuf[0] & SST26VF_CR_BPNV)) {
+		dev_dbg(nor->dev, "Any block has been permanently locked\n");
+		return -EINVAL;
+	}
+
+	return spi_nor_global_block_unlock(nor);
+}
+
+static int sst26vf_nor_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	return -EOPNOTSUPP;
+}
+
+static const struct spi_nor_locking_ops sst26vf_nor_locking_ops = {
+	.lock = sst26vf_nor_lock,
+	.unlock = sst26vf_nor_unlock,
+	.is_locked = sst26vf_nor_is_locked,
+};
+
+static int sst26vf_nor_late_init(struct spi_nor *nor)
+{
+	nor->params->locking_ops = &sst26vf_nor_locking_ops;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups sst26vf_nor_fixups = {
+	.late_init = sst26vf_nor_late_init,
+};
+
+static const struct flash_info sst_nor_parts[] = {
+	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
+	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		MFR_FLAGS(SST_WRITE) },
+	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		MFR_FLAGS(SST_WRITE) },
+	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		MFR_FLAGS(SST_WRITE) },
+	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		MFR_FLAGS(SST_WRITE) },
+	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP |
+		      SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		MFR_FLAGS(SST_WRITE) },
+	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		MFR_FLAGS(SST_WRITE) },
+	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		MFR_FLAGS(SST_WRITE) },
+	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		MFR_FLAGS(SST_WRITE) },
+	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		MFR_FLAGS(SST_WRITE) },
+	{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "sst26vf032b", INFO(0xbf2642, 0, 0, 0)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		PARSE_SFDP
+		.fixups = &sst26vf_nor_fixups },
+	{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		.fixups = &sst26vf_nor_fixups },
+};
+
+static int sst_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
+			 size_t *retlen, const u_char *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	size_t actual = 0;
+	int ret;
+
+	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+
+	ret = spi_nor_prep_and_lock(nor);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		goto out;
+
+	nor->sst_write_second = false;
+
+	/* Start write from odd address. */
+	if (to % 2) {
+		nor->program_opcode = SPINOR_OP_BP;
+
+		/* write one byte. */
+		ret = spi_nor_write_data(nor, to, 1, buf);
+		if (ret < 0)
+			goto out;
+		WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto out;
+
+		to++;
+		actual++;
+	}
+
+	/* Write out most of the data here. */
+	for (; actual < len - 1; actual += 2) {
+		nor->program_opcode = SPINOR_OP_AAI_WP;
+
+		/* write two bytes. */
+		ret = spi_nor_write_data(nor, to, 2, buf + actual);
+		if (ret < 0)
+			goto out;
+		WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ret);
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto out;
+		to += 2;
+		nor->sst_write_second = true;
+	}
+	nor->sst_write_second = false;
+
+	ret = spi_nor_write_disable(nor);
+	if (ret)
+		goto out;
+
+	ret = spi_nor_wait_till_ready(nor);
+	if (ret)
+		goto out;
+
+	/* Write out trailing byte if it exists. */
+	if (actual != len) {
+		ret = spi_nor_write_enable(nor);
+		if (ret)
+			goto out;
+
+		nor->program_opcode = SPINOR_OP_BP;
+		ret = spi_nor_write_data(nor, to, 1, buf + actual);
+		if (ret < 0)
+			goto out;
+		WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto out;
+
+		actual += 1;
+
+		ret = spi_nor_write_disable(nor);
+	}
+out:
+	*retlen += actual;
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static int sst_nor_late_init(struct spi_nor *nor)
+{
+	if (nor->info->mfr_flags & SST_WRITE)
+		nor->mtd._write = sst_nor_write;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups sst_nor_fixups = {
+	.late_init = sst_nor_late_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_sst = {
+	.name = "sst",
+	.parts = sst_nor_parts,
+	.nparts = ARRAY_SIZE(sst_nor_parts),
+	.fixups = &sst_nor_fixups,
+};
diff --git a/drivers/mtd/spi-nor/swp.c b/drivers/mtd/spi-nor/swp.c
new file mode 100644
index 0000000000..5ab9d53248
--- /dev/null
+++ b/drivers/mtd/spi-nor/swp.c
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SPI NOR Software Write Protection logic.
+ *
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static u8 spi_nor_get_sr_bp_mask(struct spi_nor *nor)
+{
+	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
+
+	if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6)
+		return mask | SR_BP3_BIT6;
+
+	if (nor->flags & SNOR_F_HAS_4BIT_BP)
+		return mask | SR_BP3;
+
+	return mask;
+}
+
+static u8 spi_nor_get_sr_tb_mask(struct spi_nor *nor)
+{
+	if (nor->flags & SNOR_F_HAS_SR_TB_BIT6)
+		return SR_TB_BIT6;
+	else
+		return SR_TB_BIT5;
+}
+
+static u64 spi_nor_get_min_prot_length_sr(struct spi_nor *nor)
+{
+	unsigned int bp_slots, bp_slots_needed;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+
+	/* Reserved one for "protect none" and one for "protect all". */
+	bp_slots = (1 << hweight8(mask)) - 2;
+	bp_slots_needed = ilog2(nor->info->n_sectors);
+
+	if (bp_slots_needed > bp_slots)
+		return nor->info->sector_size <<
+			(bp_slots_needed - bp_slots);
+	else
+		return nor->info->sector_size;
+}
+
+static void spi_nor_get_locked_range_sr(struct spi_nor *nor, u8 sr, loff_t *ofs,
+					uint64_t *len)
+{
+	struct mtd_info *mtd = &nor->mtd;
+	u64 min_prot_len;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+	u8 bp, val = sr & mask;
+
+	if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3_BIT6)
+		val = (val & ~SR_BP3_BIT6) | SR_BP3;
+
+	bp = val >> SR_BP_SHIFT;
+
+	if (!bp) {
+		/* No protection */
+		*ofs = 0;
+		*len = 0;
+		return;
+	}
+
+	min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+	*len = min_prot_len << (bp - 1);
+
+	if (*len > mtd->size)
+		*len = mtd->size;
+
+	if (nor->flags & SNOR_F_HAS_SR_TB && sr & tb_mask)
+		*ofs = 0;
+	else
+		*ofs = mtd->size - *len;
+}
+
+/*
+ * Return true if the entire region is locked (if @locked is true) or unlocked
+ * (if @locked is false); false otherwise.
+ */
+static bool spi_nor_check_lock_status_sr(struct spi_nor *nor, loff_t ofs,
+					 uint64_t len, u8 sr, bool locked)
+{
+	loff_t lock_offs, lock_offs_max, offs_max;
+	uint64_t lock_len;
+
+	if (!len)
+		return true;
+
+	spi_nor_get_locked_range_sr(nor, sr, &lock_offs, &lock_len);
+
+	lock_offs_max = lock_offs + lock_len;
+	offs_max = ofs + len;
+
+	if (locked)
+		/* Requested range is a sub-range of locked range */
+		return (offs_max <= lock_offs_max) && (ofs >= lock_offs);
+	else
+		/* Requested range does not overlap with locked range */
+		return (ofs >= lock_offs_max) || (offs_max <= lock_offs);
+}
+
+static bool spi_nor_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
+				 u8 sr)
+{
+	return spi_nor_check_lock_status_sr(nor, ofs, len, sr, true);
+}
+
+static bool spi_nor_is_unlocked_sr(struct spi_nor *nor, loff_t ofs,
+				   uint64_t len, u8 sr)
+{
+	return spi_nor_check_lock_status_sr(nor, ofs, len, sr, false);
+}
+
+/*
+ * Lock a region of the flash. Compatible with ST Micro and similar flash.
+ * Supports the block protection bits BP{0,1,2}/BP{0,1,2,3} in the status
+ * register
+ * (SR). Does not support these features found in newer SR bitfields:
+ *   - SEC: sector/block protect - only handle SEC=0 (block protect)
+ *   - CMP: complement protect - only support CMP=0 (range is not complemented)
+ *
+ * Support for the following is provided conditionally for some flash:
+ *   - TB: top/bottom protect
+ *
+ * Sample table portion for 8MB flash (Winbond w25q64fw):
+ *
+ *   SEC  |  TB   |  BP2  |  BP1  |  BP0  |  Prot Length  | Protected Portion
+ *  --------------------------------------------------------------------------
+ *    X   |   X   |   0   |   0   |   0   |  NONE         | NONE
+ *    0   |   0   |   0   |   0   |   1   |  128 KB       | Upper 1/64
+ *    0   |   0   |   0   |   1   |   0   |  256 KB       | Upper 1/32
+ *    0   |   0   |   0   |   1   |   1   |  512 KB       | Upper 1/16
+ *    0   |   0   |   1   |   0   |   0   |  1 MB         | Upper 1/8
+ *    0   |   0   |   1   |   0   |   1   |  2 MB         | Upper 1/4
+ *    0   |   0   |   1   |   1   |   0   |  4 MB         | Upper 1/2
+ *    X   |   X   |   1   |   1   |   1   |  8 MB         | ALL
+ *  ------|-------|-------|-------|-------|---------------|-------------------
+ *    0   |   1   |   0   |   0   |   1   |  128 KB       | Lower 1/64
+ *    0   |   1   |   0   |   1   |   0   |  256 KB       | Lower 1/32
+ *    0   |   1   |   0   |   1   |   1   |  512 KB       | Lower 1/16
+ *    0   |   1   |   1   |   0   |   0   |  1 MB         | Lower 1/8
+ *    0   |   1   |   1   |   0   |   1   |  2 MB         | Lower 1/4
+ *    0   |   1   |   1   |   1   |   0   |  4 MB         | Lower 1/2
+ *
+ * Returns negative on errors, 0 on success.
+ */
+static int spi_nor_sr_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	struct mtd_info *mtd = &nor->mtd;
+	u64 min_prot_len;
+	int ret, status_old, status_new;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+	u8 pow, val;
+	loff_t lock_len;
+	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
+	bool use_top;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	status_old = nor->bouncebuf[0];
+
+	/* If nothing in our range is unlocked, we don't need to do anything */
+	if (spi_nor_is_locked_sr(nor, ofs, len, status_old))
+		return 0;
+
+	/* If anything below us is unlocked, we can't use 'bottom' protection */
+	if (!spi_nor_is_locked_sr(nor, 0, ofs, status_old))
+		can_be_bottom = false;
+
+	/* If anything above us is unlocked, we can't use 'top' protection */
+	if (!spi_nor_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len),
+				  status_old))
+		can_be_top = false;
+
+	if (!can_be_bottom && !can_be_top)
+		return -EINVAL;
+
+	/* Prefer top, if both are valid */
+	use_top = can_be_top;
+
+	/* lock_len: length of region that should end up locked */
+	if (use_top)
+		lock_len = mtd->size - ofs;
+	else
+		lock_len = ofs + len;
+
+	if (lock_len == mtd->size) {
+		val = mask;
+	} else {
+		min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+		pow = ilog2(lock_len) - ilog2(min_prot_len) + 1;
+		val = pow << SR_BP_SHIFT;
+
+		if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3)
+			val = (val & ~SR_BP3) | SR_BP3_BIT6;
+
+		if (val & ~mask)
+			return -EINVAL;
+
+		/* Don't "lock" with no region! */
+		if (!(val & mask))
+			return -EINVAL;
+	}
+
+	status_new = (status_old & ~mask & ~tb_mask) | val;
+
+	/*
+	 * Disallow further writes if WP# pin is neither left floating nor
+	 * wrongly tied to GND (that includes internal pull-downs).
+	 * WP# pin hard strapped to GND can be a valid use case.
+	 */
+	if (!(nor->flags & SNOR_F_NO_WP))
+		status_new |= SR_SRWD;
+
+	if (!use_top)
+		status_new |= tb_mask;
+
+	/* Don't bother if they're the same */
+	if (status_new == status_old)
+		return 0;
+
+	/* Only modify protection if it will not unlock other areas */
+	if ((status_new & mask) < (status_old & mask))
+		return -EINVAL;
+
+	return spi_nor_write_sr_and_check(nor, status_new);
+}
+
+/*
+ * Unlock a region of the flash. See spi_nor_sr_lock() for more info
+ *
+ * Returns negative on errors, 0 on success.
+ */
+static int spi_nor_sr_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	struct mtd_info *mtd = &nor->mtd;
+	u64 min_prot_len;
+	int ret, status_old, status_new;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+	u8 pow, val;
+	loff_t lock_len;
+	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
+	bool use_top;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	status_old = nor->bouncebuf[0];
+
+	/* If nothing in our range is locked, we don't need to do anything */
+	if (spi_nor_is_unlocked_sr(nor, ofs, len, status_old))
+		return 0;
+
+	/* If anything below us is locked, we can't use 'top' protection */
+	if (!spi_nor_is_unlocked_sr(nor, 0, ofs, status_old))
+		can_be_top = false;
+
+	/* If anything above us is locked, we can't use 'bottom' protection */
+	if (!spi_nor_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len),
+				    status_old))
+		can_be_bottom = false;
+
+	if (!can_be_bottom && !can_be_top)
+		return -EINVAL;
+
+	/* Prefer top, if both are valid */
+	use_top = can_be_top;
+
+	/* lock_len: length of region that should remain locked */
+	if (use_top)
+		lock_len = mtd->size - (ofs + len);
+	else
+		lock_len = ofs;
+
+	if (lock_len == 0) {
+		val = 0; /* fully unlocked */
+	} else {
+		min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+		pow = ilog2(lock_len) - ilog2(min_prot_len) + 1;
+		val = pow << SR_BP_SHIFT;
+
+		if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3)
+			val = (val & ~SR_BP3) | SR_BP3_BIT6;
+
+		/* Some power-of-two sizes are not supported */
+		if (val & ~mask)
+			return -EINVAL;
+	}
+
+	status_new = (status_old & ~mask & ~tb_mask) | val;
+
+	/* Don't protect status register if we're fully unlocked */
+	if (lock_len == 0)
+		status_new &= ~SR_SRWD;
+
+	if (!use_top)
+		status_new |= tb_mask;
+
+	/* Don't bother if they're the same */
+	if (status_new == status_old)
+		return 0;
+
+	/* Only modify protection if it will not lock other areas */
+	if ((status_new & mask) > (status_old & mask))
+		return -EINVAL;
+
+	return spi_nor_write_sr_and_check(nor, status_new);
+}
+
+/*
+ * Check if a region of the flash is (completely) locked. See spi_nor_sr_lock()
+ * for more info.
+ *
+ * Returns 1 if entire region is locked, 0 if any portion is unlocked, and
+ * negative on errors.
+ */
+static int spi_nor_sr_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	int ret;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	return spi_nor_is_locked_sr(nor, ofs, len, nor->bouncebuf[0]);
+}
+
+static const struct spi_nor_locking_ops spi_nor_sr_locking_ops = {
+	.lock = spi_nor_sr_lock,
+	.unlock = spi_nor_sr_unlock,
+	.is_locked = spi_nor_sr_is_locked,
+};
+
+void spi_nor_init_default_locking_ops(struct spi_nor *nor)
+{
+	nor->params->locking_ops = &spi_nor_sr_locking_ops;
+}
+
+static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	int ret;
+
+	ret = spi_nor_prep_and_lock(nor);
+	if (ret)
+		return ret;
+
+	ret = nor->params->locking_ops->lock(nor, ofs, len);
+
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	int ret;
+
+	ret = spi_nor_prep_and_lock(nor);
+	if (ret)
+		return ret;
+
+	ret = nor->params->locking_ops->unlock(nor, ofs, len);
+
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	int ret;
+
+	ret = spi_nor_prep_and_lock(nor);
+	if (ret)
+		return ret;
+
+	ret = nor->params->locking_ops->is_locked(nor, ofs, len);
+
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+/**
+ * spi_nor_try_unlock_all() - Tries to unlock the entire flash memory array.
+ * @nor:	pointer to a 'struct spi_nor'.
+ *
+ * Some SPI NOR flashes are write protected by default after a power-on reset
+ * cycle, in order to avoid inadvertent writes during power-up. Backward
+ * compatibility imposes to unlock the entire flash memory array at power-up
+ * by default.
+ *
+ * Unprotecting the entire flash array will fail for boards which are hardware
+ * write-protected. Thus any errors are ignored.
+ */
+void spi_nor_try_unlock_all(struct spi_nor *nor)
+{
+	int ret;
+
+	if (!(nor->flags & SNOR_F_HAS_LOCK))
+		return;
+
+	dev_dbg(nor->dev, "Unprotecting entire flash array\n");
+
+	ret = spi_nor_unlock(&nor->mtd, 0, nor->params->size);
+	if (ret)
+		dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
+}
+
+void spi_nor_set_mtd_locking_ops(struct spi_nor *nor)
+{
+	struct mtd_info *mtd = &nor->mtd;
+
+	if (!nor->params->locking_ops)
+		return;
+
+	mtd->_lock = spi_nor_lock;
+	mtd->_unlock = spi_nor_unlock;
+	mtd->_is_locked = spi_nor_is_locked;
+}
diff --git a/drivers/mtd/spi-nor/sysfs.c b/drivers/mtd/spi-nor/sysfs.c
new file mode 100644
index 0000000000..c09bb832b3
--- /dev/null
+++ b/drivers/mtd/spi-nor/sysfs.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/mtd/spi-nor.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+#include <linux/sysfs.h>
+
+#include "core.h"
+
+static ssize_t manufacturer_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct spi_mem *spimem = spi_get_drvdata(spi);
+	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+
+	return sysfs_emit(buf, "%s\n", nor->manufacturer->name);
+}
+static DEVICE_ATTR_RO(manufacturer);
+
+static ssize_t partname_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct spi_mem *spimem = spi_get_drvdata(spi);
+	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+
+	return sysfs_emit(buf, "%s\n", nor->info->name);
+}
+static DEVICE_ATTR_RO(partname);
+
+static ssize_t jedec_id_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct spi_mem *spimem = spi_get_drvdata(spi);
+	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+	const u8 *id = nor->info->id_len ? nor->info->id : nor->id;
+	u8 id_len = nor->info->id_len ?: SPI_NOR_MAX_ID_LEN;
+
+	return sysfs_emit(buf, "%*phN\n", id_len, id);
+}
+static DEVICE_ATTR_RO(jedec_id);
+
+static struct attribute *spi_nor_sysfs_entries[] = {
+	&dev_attr_manufacturer.attr,
+	&dev_attr_partname.attr,
+	&dev_attr_jedec_id.attr,
+	NULL
+};
+
+static ssize_t sfdp_read(struct file *filp, struct kobject *kobj,
+			 struct bin_attribute *bin_attr, char *buf,
+			 loff_t off, size_t count)
+{
+	struct spi_device *spi = to_spi_device(kobj_to_dev(kobj));
+	struct spi_mem *spimem = spi_get_drvdata(spi);
+	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+	struct sfdp *sfdp = nor->sfdp;
+	size_t sfdp_size = sfdp->num_dwords * sizeof(*sfdp->dwords);
+
+	return memory_read_from_buffer(buf, count, &off, nor->sfdp->dwords,
+				       sfdp_size);
+}
+static BIN_ATTR_RO(sfdp, 0);
+
+static struct bin_attribute *spi_nor_sysfs_bin_entries[] = {
+	&bin_attr_sfdp,
+	NULL
+};
+
+static umode_t spi_nor_sysfs_is_visible(struct kobject *kobj,
+					struct attribute *attr, int n)
+{
+	struct spi_device *spi = to_spi_device(kobj_to_dev(kobj));
+	struct spi_mem *spimem = spi_get_drvdata(spi);
+	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+
+	if (attr == &dev_attr_manufacturer.attr && !nor->manufacturer)
+		return 0;
+	if (attr == &dev_attr_jedec_id.attr && !nor->info->id_len && !nor->id)
+		return 0;
+
+	return 0444;
+}
+
+static umode_t spi_nor_sysfs_is_bin_visible(struct kobject *kobj,
+					    struct bin_attribute *attr, int n)
+{
+	struct spi_device *spi = to_spi_device(kobj_to_dev(kobj));
+	struct spi_mem *spimem = spi_get_drvdata(spi);
+	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+
+	if (attr == &bin_attr_sfdp && nor->sfdp)
+		return 0444;
+
+	return 0;
+}
+
+static const struct attribute_group spi_nor_sysfs_group = {
+	.name		= "spi-nor",
+	.is_visible	= spi_nor_sysfs_is_visible,
+	.is_bin_visible	= spi_nor_sysfs_is_bin_visible,
+	.attrs		= spi_nor_sysfs_entries,
+	.bin_attrs	= spi_nor_sysfs_bin_entries,
+};
+
+const struct attribute_group *spi_nor_sysfs_groups[] = {
+	&spi_nor_sysfs_group,
+	NULL
+};
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
new file mode 100644
index 0000000000..cd99c9a1c5
--- /dev/null
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+#define WINBOND_NOR_OP_RDEAR	0xc8	/* Read Extended Address Register */
+#define WINBOND_NOR_OP_WREAR	0xc5	/* Write Extended Address Register */
+
+#define WINBOND_NOR_WREAR_OP(buf)					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(WINBOND_NOR_OP_WREAR, 0),		\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(1, buf, 0))
+
+static int
+w25q256_post_bfpt_fixups(struct spi_nor *nor,
+			 const struct sfdp_parameter_header *bfpt_header,
+			 const struct sfdp_bfpt *bfpt)
+{
+	/*
+	 * W25Q256JV supports 4B opcodes but W25Q256FV does not.
+	 * Unfortunately, Winbond has re-used the same JEDEC ID for both
+	 * variants which prevents us from defining a new entry in the parts
+	 * table.
+	 * To differentiate between W25Q256JV and W25Q256FV check SFDP header
+	 * version: only JV has JESD216A compliant structure (version 5).
+	 */
+	if (bfpt_header->major == SFDP_JESD216_MAJOR &&
+	    bfpt_header->minor == SFDP_JESD216A_MINOR)
+		nor->flags |= SNOR_F_4B_OPCODES;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups w25q256_fixups = {
+	.post_bfpt = w25q256_post_bfpt_fixups,
+};
+
+static const struct flash_info winbond_nor_parts[] = {
+	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+	{ "w25x05", INFO(0xef3010, 0, 64 * 1024,  1)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q16dw", INFO(0xef6015, 0, 64 * 1024,  32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024,  32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q20cl", INFO(0xef4012, 0, 64 * 1024,  4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q20bw", INFO(0xef5012, 0, 64 * 1024,  4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q20ew", INFO(0xef6012, 0, 64 * 1024,  4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		OTP_INFO(256, 3, 0x1000, 0x1000) },
+	{ "w25q32jv", INFO(0xef7016, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		OTP_INFO(256, 3, 0x1000, 0x1000) },
+	{ "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q128jwm", INFO(0xef8018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q256jwm", INFO(0xef8019, 0, 64 * 1024, 512)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q64jvm", INFO(0xef7017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q128", INFO(0xef4018, 0, 0, 0)
+		PARSE_SFDP
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		.fixups = &w25q256_fixups },
+	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512)
+		PARSE_SFDP },
+	{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ |
+			      SPI_NOR_DUAL_READ) },
+	{ "w25q512nwq", INFO(0xef6020, 0, 0, 0)
+		PARSE_SFDP
+		OTP_INFO(256, 3, 0x1000, 0x1000) },
+	{ "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 1024)
+		PARSE_SFDP
+		OTP_INFO(256, 3, 0x1000, 0x1000) },
+	{ "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+};
+
+/**
+ * winbond_nor_write_ear() - Write Extended Address Register.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @ear:	value to write to the Extended Address Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int winbond_nor_write_ear(struct spi_nor *nor, u8 ear)
+{
+	int ret;
+
+	nor->bouncebuf[0] = ear;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = WINBOND_NOR_WREAR_OP(nor->bouncebuf);
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor,
+						       WINBOND_NOR_OP_WREAR,
+						       nor->bouncebuf, 1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d writing EAR\n", ret);
+
+	return ret;
+}
+
+/**
+ * winbond_nor_set_4byte_addr_mode() - Set 4-byte address mode for Winbond
+ * flashes.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
+ *		address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int winbond_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	ret = spi_nor_set_4byte_addr_mode_en4b_ex4b(nor, enable);
+	if (ret || enable)
+		return ret;
+
+	/*
+	 * On Winbond W25Q256FV, leaving 4byte mode causes the Extended Address
+	 * Register to be set to 1, so all 3-byte-address reads come from the
+	 * second 16M. We must clear the register to enable normal behavior.
+	 */
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	ret = winbond_nor_write_ear(nor, 0);
+	if (ret)
+		return ret;
+
+	return spi_nor_write_disable(nor);
+}
+
+static const struct spi_nor_otp_ops winbond_nor_otp_ops = {
+	.read = spi_nor_otp_read_secr,
+	.write = spi_nor_otp_write_secr,
+	.erase = spi_nor_otp_erase_secr,
+	.lock = spi_nor_otp_lock_sr2,
+	.is_locked = spi_nor_otp_is_locked_sr2,
+};
+
+static int winbond_nor_late_init(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+
+	if (params->otp.org->n_regions)
+		params->otp.ops = &winbond_nor_otp_ops;
+
+	/*
+	 * Winbond seems to require that the Extended Address Register to be set
+	 * to zero when exiting the 4-Byte Address Mode, at least for W25Q256FV.
+	 * This requirement is not described in the JESD216 SFDP standard, thus
+	 * it is Winbond specific. Since we do not know if other Winbond flashes
+	 * have the same requirement, play safe and overwrite the method parsed
+	 * from BFPT, if any.
+	 */
+	params->set_4byte_addr_mode = winbond_nor_set_4byte_addr_mode;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups winbond_nor_fixups = {
+	.late_init = winbond_nor_late_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_winbond = {
+	.name = "winbond",
+	.parts = winbond_nor_parts,
+	.nparts = ARRAY_SIZE(winbond_nor_parts),
+	.fixups = &winbond_nor_fixups,
+};
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
new file mode 100644
index 0000000000..00d53eae5e
--- /dev/null
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+#define XILINX_OP_SE		0x50	/* Sector erase */
+#define XILINX_OP_PP		0x82	/* Page program */
+#define XILINX_OP_RDSR		0xd7	/* Read status register */
+
+#define XSR_PAGESIZE		BIT(0)	/* Page size in Po2 or Linear */
+#define XSR_RDY			BIT(7)	/* Ready */
+
+#define XILINX_RDSR_OP(buf)						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(XILINX_OP_RDSR, 0),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_IN(1, buf, 0))
+
+#define S3AN_INFO(_jedec_id, _n_sectors, _page_size)			\
+		.id = {							\
+			((_jedec_id) >> 16) & 0xff,			\
+			((_jedec_id) >> 8) & 0xff,			\
+			(_jedec_id) & 0xff				\
+			},						\
+		.id_len = 3,						\
+		.sector_size = (8 * (_page_size)),			\
+		.n_sectors = (_n_sectors),				\
+		.page_size = (_page_size),				\
+		.n_banks = 1,						\
+		.addr_nbytes = 3,					\
+		.flags = SPI_NOR_NO_FR
+
+/* Xilinx S3AN share MFR with Atmel SPI NOR */
+static const struct flash_info xilinx_nor_parts[] = {
+	/* Xilinx S3AN Internal Flash */
+	{ "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
+	{ "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
+	{ "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
+	{ "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
+	{ "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
+};
+
+/*
+ * This code converts an address to the Default Address Mode, that has non
+ * power of two page sizes. We must support this mode because it is the default
+ * mode supported by Xilinx tools, it can access the whole flash area and
+ * changing over to the Power-of-two mode is irreversible and corrupts the
+ * original data.
+ * Addr can safely be unsigned int, the biggest S3AN device is smaller than
+ * 4 MiB.
+ */
+static u32 s3an_nor_convert_addr(struct spi_nor *nor, u32 addr)
+{
+	u32 page_size = nor->params->page_size;
+	u32 offset, page;
+
+	offset = addr % page_size;
+	page = addr / page_size;
+	page <<= (page_size > 512) ? 10 : 9;
+
+	return page | offset;
+}
+
+/**
+ * xilinx_nor_read_sr() - Read the Status Register on S3AN flashes.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @sr:		pointer to a DMA-able buffer where the value of the
+ *              Status Register will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int xilinx_nor_read_sr(struct spi_nor *nor, u8 *sr)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op = XILINX_RDSR_OP(sr);
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_read_reg(nor, XILINX_OP_RDSR, sr,
+						      1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d reading SR\n", ret);
+
+	return ret;
+}
+
+/**
+ * xilinx_nor_sr_ready() - Query the Status Register of the S3AN flash to see
+ * if the flash is ready for new commands.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
+ */
+static int xilinx_nor_sr_ready(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = xilinx_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	return !!(nor->bouncebuf[0] & XSR_RDY);
+}
+
+static int xilinx_nor_setup(struct spi_nor *nor,
+			    const struct spi_nor_hwcaps *hwcaps)
+{
+	u32 page_size;
+	int ret;
+
+	ret = xilinx_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	nor->erase_opcode = XILINX_OP_SE;
+	nor->program_opcode = XILINX_OP_PP;
+	nor->read_opcode = SPINOR_OP_READ;
+	nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
+
+	/*
+	 * This flashes have a page size of 264 or 528 bytes (known as
+	 * Default addressing mode). It can be changed to a more standard
+	 * Power of two mode where the page size is 256/512. This comes
+	 * with a price: there is 3% less of space, the data is corrupted
+	 * and the page size cannot be changed back to default addressing
+	 * mode.
+	 *
+	 * The current addressing mode can be read from the XRDSR register
+	 * and should not be changed, because is a destructive operation.
+	 */
+	if (nor->bouncebuf[0] & XSR_PAGESIZE) {
+		/* Flash in Power of 2 mode */
+		page_size = (nor->params->page_size == 264) ? 256 : 512;
+		nor->params->page_size = page_size;
+		nor->mtd.writebufsize = page_size;
+		nor->params->size = 8 * page_size * nor->info->n_sectors;
+		nor->mtd.erasesize = 8 * page_size;
+	} else {
+		/* Flash in Default addressing mode */
+		nor->params->convert_addr = s3an_nor_convert_addr;
+		nor->mtd.erasesize = nor->info->sector_size;
+	}
+
+	return 0;
+}
+
+static int xilinx_nor_late_init(struct spi_nor *nor)
+{
+	nor->params->setup = xilinx_nor_setup;
+	nor->params->ready = xilinx_nor_sr_ready;
+
+	return 0;
+}
+
+static const struct spi_nor_fixups xilinx_nor_fixups = {
+	.late_init = xilinx_nor_late_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_xilinx = {
+	.name = "xilinx",
+	.parts = xilinx_nor_parts,
+	.nparts = ARRAY_SIZE(xilinx_nor_parts),
+	.fixups = &xilinx_nor_fixups,
+};
diff --git a/drivers/mtd/spi-nor/xmc.c b/drivers/mtd/spi-nor/xmc.c
new file mode 100644
index 0000000000..051411e863
--- /dev/null
+++ b/drivers/mtd/spi-nor/xmc.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info xmc_nor_parts[] = {
+	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
+	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+};
+
+const struct spi_nor_manufacturer spi_nor_xmc = {
+	.name = "xmc",
+	.parts = xmc_nor_parts,
+	.nparts = ARRAY_SIZE(xmc_nor_parts),
+};