Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 116 insertions, 0 deletions

diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
new file mode 100644
index 0000000000..4b2f9cb17f
--- /dev/null
+++ b/drivers/net/can/sja1000/Kconfig
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menuconfig CAN_SJA1000
+	tristate "Philips/NXP SJA1000 devices"
+	depends on HAS_IOMEM
+
+if CAN_SJA1000
+
+config CAN_EMS_PCI
+	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
+	depends on PCI
+	help
+	  This driver is for the one, two or four channel CPC-PCI,
+	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
+	  (http://www.ems-wuensche.de).
+
+config CAN_EMS_PCMCIA
+	tristate "EMS CPC-CARD Card"
+	depends on PCMCIA
+	help
+	  This driver is for the one or two channel CPC-CARD cards from
+	  EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
+config CAN_F81601
+	tristate "Fintek F81601 PCIE to 2 CAN Controller"
+	depends on PCI
+	help
+	  This driver adds support for Fintek F81601 PCIE to 2 CAN
+	  Controller. It had internal 24MHz clock source, but it can
+	  be changed by manufacturer. Use modinfo to get usage for
+	  parameters. Visit http://www.fintek.com.tw to get more
+	  information.
+
+config CAN_KVASER_PCI
+	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+	depends on PCI
+	help
+	  This driver is for the PCIcanx and PCIcan cards (1, 2 or
+	  4 channel) from Kvaser (http://www.kvaser.com).
+
+config CAN_PEAK_PCI
+	tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
+	depends on PCI
+	help
+	  This driver is for the PCAN-PCI/PCIe/miniPCI cards
+	  (1, 2, 3 or 4 channels) from PEAK-System Technik
+	  (http://www.peak-system.com).
+
+config CAN_PEAK_PCIEC
+	bool "PEAK PCAN-ExpressCard Cards"
+	depends on CAN_PEAK_PCI
+	select I2C
+	select I2C_ALGOBIT
+	default y
+	help
+	  Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
+	  Technik. This will also automatically select I2C and I2C_ALGO
+	  configuration options.
+
+config CAN_PEAK_PCMCIA
+	tristate "PEAK PCAN-PC Card"
+	depends on PCMCIA
+	depends on HAS_IOPORT_MAP
+	help
+	  This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
+	  from PEAK-System (http://www.peak-system.com). To compile this
+	  driver as a module, choose M here: the module will be called
+	  peak_pcmcia.
+
+config CAN_PLX_PCI
+	tristate "PLX90xx PCI-bridge based Cards"
+	depends on PCI
+	help
+	  This driver is for CAN interface cards based on
+	  the PLX90xx PCI bridge.
+	  Driver supports now:
+	   - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
+	   - Adlink PCI-7841/cPCI-7841 SE card
+	   - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
+	   - esd CAN-PCI/PMC/266
+	   - esd CAN-PCIe/2000
+	   - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
+	   - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
+	   - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
+	   - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
+	   - ASEM CAN raw - 2 isolated CAN channels (www.asem.it)
+
+config CAN_SJA1000_ISA
+	tristate "ISA Bus based legacy SJA1000 driver"
+	help
+	  This driver adds legacy support for SJA1000 chips connected to
+	  the ISA bus using I/O port, memory mapped or indirect access.
+
+config CAN_SJA1000_PLATFORM
+	tristate "Generic Platform Bus based SJA1000 driver"
+	help
+	  This driver adds support for the SJA1000 chips connected to
+	  the "platform bus" (Linux abstraction for directly to the
+	  processor attached devices).  Which can be found on various
+	  boards from Phytec (http://www.phytec.de) like the PCM027,
+	  PCM038. It also provides the OpenFirmware "platform bus" found
+	  on embedded systems with OpenFirmware bindings, e.g. if you
+	  have a PowerPC based system you may want to enable this option.
+
+config CAN_TSCAN1
+	tristate "TS-CAN1 PC104 boards"
+	depends on ISA
+	help
+	  This driver is for Technologic Systems' TSCAN-1 PC104 boards.
+	  https://www.embeddedts.com/products/TS-CAN1
+	  The driver supports multiple boards and automatically configures them:
+	  PLD IO base addresses are read from jumpers JP1 and JP2,
+	  IRQ numbers are read from jumpers JP4 and JP5,
+	  SJA1000 IO base addresses are chosen heuristically (first that works).
+
+endif