Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1469 insertions, 0 deletions

diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
new file mode 100644
index 0000000000..ee67adeb2c
--- /dev/null
+++ b/drivers/net/dsa/lan9303-core.c
@@ -0,0 +1,1469 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Pengutronix, Juergen Borleis <kernel@pengutronix.de>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regmap.h>
+#include <linux/mutex.h>
+#include <linux/mii.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
+#include <linux/etherdevice.h>
+
+#include "lan9303.h"
+
+/* For the LAN9303 and LAN9354, only port 0 is an XMII port. */
+#define IS_PORT_XMII(port)	((port) == 0)
+
+#define LAN9303_NUM_PORTS 3
+
+/* 13.2 System Control and Status Registers
+ * Multiply register number by 4 to get address offset.
+ */
+#define LAN9303_CHIP_REV 0x14
+# define LAN9303_CHIP_ID 0x9303
+# define LAN9352_CHIP_ID 0x9352
+# define LAN9353_CHIP_ID 0x9353
+# define LAN9354_CHIP_ID 0x9354
+# define LAN9355_CHIP_ID 0x9355
+#define LAN9303_IRQ_CFG 0x15
+# define LAN9303_IRQ_CFG_IRQ_ENABLE BIT(8)
+# define LAN9303_IRQ_CFG_IRQ_POL BIT(4)
+# define LAN9303_IRQ_CFG_IRQ_TYPE BIT(0)
+#define LAN9303_INT_STS 0x16
+# define LAN9303_INT_STS_PHY_INT2 BIT(27)
+# define LAN9303_INT_STS_PHY_INT1 BIT(26)
+#define LAN9303_INT_EN 0x17
+# define LAN9303_INT_EN_PHY_INT2_EN BIT(27)
+# define LAN9303_INT_EN_PHY_INT1_EN BIT(26)
+#define LAN9303_BYTE_ORDER 0x19
+#define LAN9303_HW_CFG 0x1D
+# define LAN9303_HW_CFG_READY BIT(27)
+# define LAN9303_HW_CFG_AMDX_EN_PORT2 BIT(26)
+# define LAN9303_HW_CFG_AMDX_EN_PORT1 BIT(25)
+#define LAN9303_PMI_DATA 0x29
+#define LAN9303_PMI_ACCESS 0x2A
+# define LAN9303_PMI_ACCESS_PHY_ADDR(x) (((x) & 0x1f) << 11)
+# define LAN9303_PMI_ACCESS_MIIRINDA(x) (((x) & 0x1f) << 6)
+# define LAN9303_PMI_ACCESS_MII_BUSY BIT(0)
+# define LAN9303_PMI_ACCESS_MII_WRITE BIT(1)
+#define LAN9303_MANUAL_FC_1 0x68
+#define LAN9303_MANUAL_FC_2 0x69
+#define LAN9303_MANUAL_FC_0 0x6a
+# define LAN9303_BP_EN BIT(6)
+# define LAN9303_RX_FC_EN BIT(2)
+# define LAN9303_TX_FC_EN BIT(1)
+#define LAN9303_SWITCH_CSR_DATA 0x6b
+#define LAN9303_SWITCH_CSR_CMD 0x6c
+#define LAN9303_SWITCH_CSR_CMD_BUSY BIT(31)
+#define LAN9303_SWITCH_CSR_CMD_RW BIT(30)
+#define LAN9303_SWITCH_CSR_CMD_LANES (BIT(19) | BIT(18) | BIT(17) | BIT(16))
+#define LAN9303_VIRT_PHY_BASE 0x70
+#define LAN9303_VIRT_SPECIAL_CTRL 0x77
+#define  LAN9303_VIRT_SPECIAL_TURBO BIT(10) /*Turbo MII Enable*/
+
+/*13.4 Switch Fabric Control and Status Registers
+ * Accessed indirectly via SWITCH_CSR_CMD, SWITCH_CSR_DATA.
+ */
+#define LAN9303_SW_DEV_ID 0x0000
+#define LAN9303_SW_RESET 0x0001
+#define LAN9303_SW_RESET_RESET BIT(0)
+#define LAN9303_SW_IMR 0x0004
+#define LAN9303_SW_IPR 0x0005
+#define LAN9303_MAC_VER_ID_0 0x0400
+#define LAN9303_MAC_RX_CFG_0 0x0401
+# define LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES BIT(1)
+# define LAN9303_MAC_RX_CFG_X_RX_ENABLE BIT(0)
+#define LAN9303_MAC_RX_UNDSZE_CNT_0 0x0410
+#define LAN9303_MAC_RX_64_CNT_0 0x0411
+#define LAN9303_MAC_RX_127_CNT_0 0x0412
+#define LAN9303_MAC_RX_255_CNT_0 0x413
+#define LAN9303_MAC_RX_511_CNT_0 0x0414
+#define LAN9303_MAC_RX_1023_CNT_0 0x0415
+#define LAN9303_MAC_RX_MAX_CNT_0 0x0416
+#define LAN9303_MAC_RX_OVRSZE_CNT_0 0x0417
+#define LAN9303_MAC_RX_PKTOK_CNT_0 0x0418
+#define LAN9303_MAC_RX_CRCERR_CNT_0 0x0419
+#define LAN9303_MAC_RX_MULCST_CNT_0 0x041a
+#define LAN9303_MAC_RX_BRDCST_CNT_0 0x041b
+#define LAN9303_MAC_RX_PAUSE_CNT_0 0x041c
+#define LAN9303_MAC_RX_FRAG_CNT_0 0x041d
+#define LAN9303_MAC_RX_JABB_CNT_0 0x041e
+#define LAN9303_MAC_RX_ALIGN_CNT_0 0x041f
+#define LAN9303_MAC_RX_PKTLEN_CNT_0 0x0420
+#define LAN9303_MAC_RX_GOODPKTLEN_CNT_0 0x0421
+#define LAN9303_MAC_RX_SYMBL_CNT_0 0x0422
+#define LAN9303_MAC_RX_CTLFRM_CNT_0 0x0423
+
+#define LAN9303_MAC_TX_CFG_0 0x0440
+# define LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT (21 << 2)
+# define LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE BIT(1)
+# define LAN9303_MAC_TX_CFG_X_TX_ENABLE BIT(0)
+#define LAN9303_MAC_TX_DEFER_CNT_0 0x0451
+#define LAN9303_MAC_TX_PAUSE_CNT_0 0x0452
+#define LAN9303_MAC_TX_PKTOK_CNT_0 0x0453
+#define LAN9303_MAC_TX_64_CNT_0 0x0454
+#define LAN9303_MAC_TX_127_CNT_0 0x0455
+#define LAN9303_MAC_TX_255_CNT_0 0x0456
+#define LAN9303_MAC_TX_511_CNT_0 0x0457
+#define LAN9303_MAC_TX_1023_CNT_0 0x0458
+#define LAN9303_MAC_TX_MAX_CNT_0 0x0459
+#define LAN9303_MAC_TX_UNDSZE_CNT_0 0x045a
+#define LAN9303_MAC_TX_PKTLEN_CNT_0 0x045c
+#define LAN9303_MAC_TX_BRDCST_CNT_0 0x045d
+#define LAN9303_MAC_TX_MULCST_CNT_0 0x045e
+#define LAN9303_MAC_TX_LATECOL_0 0x045f
+#define LAN9303_MAC_TX_EXCOL_CNT_0 0x0460
+#define LAN9303_MAC_TX_SNGLECOL_CNT_0 0x0461
+#define LAN9303_MAC_TX_MULTICOL_CNT_0 0x0462
+#define LAN9303_MAC_TX_TOTALCOL_CNT_0 0x0463
+
+#define LAN9303_MAC_VER_ID_1 0x0800
+#define LAN9303_MAC_RX_CFG_1 0x0801
+#define LAN9303_MAC_TX_CFG_1 0x0840
+#define LAN9303_MAC_VER_ID_2 0x0c00
+#define LAN9303_MAC_RX_CFG_2 0x0c01
+#define LAN9303_MAC_TX_CFG_2 0x0c40
+#define LAN9303_SWE_ALR_CMD 0x1800
+# define LAN9303_ALR_CMD_MAKE_ENTRY    BIT(2)
+# define LAN9303_ALR_CMD_GET_FIRST     BIT(1)
+# define LAN9303_ALR_CMD_GET_NEXT      BIT(0)
+#define LAN9303_SWE_ALR_WR_DAT_0 0x1801
+#define LAN9303_SWE_ALR_WR_DAT_1 0x1802
+# define LAN9303_ALR_DAT1_VALID        BIT(26)
+# define LAN9303_ALR_DAT1_END_OF_TABL  BIT(25)
+# define LAN9303_ALR_DAT1_AGE_OVERRID  BIT(25)
+# define LAN9303_ALR_DAT1_STATIC       BIT(24)
+# define LAN9303_ALR_DAT1_PORT_BITOFFS  16
+# define LAN9303_ALR_DAT1_PORT_MASK    (7 << LAN9303_ALR_DAT1_PORT_BITOFFS)
+#define LAN9303_SWE_ALR_RD_DAT_0 0x1805
+#define LAN9303_SWE_ALR_RD_DAT_1 0x1806
+#define LAN9303_SWE_ALR_CMD_STS 0x1808
+# define ALR_STS_MAKE_PEND     BIT(0)
+#define LAN9303_SWE_VLAN_CMD 0x180b
+# define LAN9303_SWE_VLAN_CMD_RNW BIT(5)
+# define LAN9303_SWE_VLAN_CMD_PVIDNVLAN BIT(4)
+#define LAN9303_SWE_VLAN_WR_DATA 0x180c
+#define LAN9303_SWE_VLAN_RD_DATA 0x180e
+# define LAN9303_SWE_VLAN_MEMBER_PORT2 BIT(17)
+# define LAN9303_SWE_VLAN_UNTAG_PORT2 BIT(16)
+# define LAN9303_SWE_VLAN_MEMBER_PORT1 BIT(15)
+# define LAN9303_SWE_VLAN_UNTAG_PORT1 BIT(14)
+# define LAN9303_SWE_VLAN_MEMBER_PORT0 BIT(13)
+# define LAN9303_SWE_VLAN_UNTAG_PORT0 BIT(12)
+#define LAN9303_SWE_VLAN_CMD_STS 0x1810
+#define LAN9303_SWE_GLB_INGRESS_CFG 0x1840
+# define LAN9303_SWE_GLB_INGR_IGMP_TRAP BIT(7)
+# define LAN9303_SWE_GLB_INGR_IGMP_PORT(p) BIT(10 + p)
+#define LAN9303_SWE_PORT_STATE 0x1843
+# define LAN9303_SWE_PORT_STATE_FORWARDING_PORT2 (0)
+# define LAN9303_SWE_PORT_STATE_LEARNING_PORT2 BIT(5)
+# define LAN9303_SWE_PORT_STATE_BLOCKING_PORT2 BIT(4)
+# define LAN9303_SWE_PORT_STATE_FORWARDING_PORT1 (0)
+# define LAN9303_SWE_PORT_STATE_LEARNING_PORT1 BIT(3)
+# define LAN9303_SWE_PORT_STATE_BLOCKING_PORT1 BIT(2)
+# define LAN9303_SWE_PORT_STATE_FORWARDING_PORT0 (0)
+# define LAN9303_SWE_PORT_STATE_LEARNING_PORT0 BIT(1)
+# define LAN9303_SWE_PORT_STATE_BLOCKING_PORT0 BIT(0)
+# define LAN9303_SWE_PORT_STATE_DISABLED_PORT0 (3)
+#define LAN9303_SWE_PORT_MIRROR 0x1846
+# define LAN9303_SWE_PORT_MIRROR_SNIFF_ALL BIT(8)
+# define LAN9303_SWE_PORT_MIRROR_SNIFFER_PORT2 BIT(7)
+# define LAN9303_SWE_PORT_MIRROR_SNIFFER_PORT1 BIT(6)
+# define LAN9303_SWE_PORT_MIRROR_SNIFFER_PORT0 BIT(5)
+# define LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT2 BIT(4)
+# define LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT1 BIT(3)
+# define LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT0 BIT(2)
+# define LAN9303_SWE_PORT_MIRROR_ENABLE_RX_MIRRORING BIT(1)
+# define LAN9303_SWE_PORT_MIRROR_ENABLE_TX_MIRRORING BIT(0)
+# define LAN9303_SWE_PORT_MIRROR_DISABLED 0
+#define LAN9303_SWE_INGRESS_PORT_TYPE 0x1847
+#define  LAN9303_SWE_INGRESS_PORT_TYPE_VLAN 3
+#define LAN9303_BM_CFG 0x1c00
+#define LAN9303_BM_EGRSS_PORT_TYPE 0x1c0c
+# define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT2 (BIT(17) | BIT(16))
+# define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT1 (BIT(9) | BIT(8))
+# define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT0 (BIT(1) | BIT(0))
+
+#define LAN9303_SWITCH_PORT_REG(port, reg0) (0x400 * (port) + (reg0))
+
+/* the built-in PHYs are of type LAN911X */
+#define MII_LAN911X_SPECIAL_MODES 0x12
+#define MII_LAN911X_SPECIAL_CONTROL_STATUS 0x1f
+
+static const struct regmap_range lan9303_valid_regs[] = {
+	regmap_reg_range(0x14, 0x17), /* misc, interrupt */
+	regmap_reg_range(0x19, 0x19), /* endian test */
+	regmap_reg_range(0x1d, 0x1d), /* hardware config */
+	regmap_reg_range(0x23, 0x24), /* general purpose timer */
+	regmap_reg_range(0x27, 0x27), /* counter */
+	regmap_reg_range(0x29, 0x2a), /* PMI index regs */
+	regmap_reg_range(0x68, 0x6a), /* flow control */
+	regmap_reg_range(0x6b, 0x6c), /* switch fabric indirect regs */
+	regmap_reg_range(0x6d, 0x6f), /* misc */
+	regmap_reg_range(0x70, 0x77), /* virtual phy */
+	regmap_reg_range(0x78, 0x7a), /* GPIO */
+	regmap_reg_range(0x7c, 0x7e), /* MAC & reset */
+	regmap_reg_range(0x80, 0xb7), /* switch fabric direct regs (wr only) */
+};
+
+static const struct regmap_range lan9303_reserved_ranges[] = {
+	regmap_reg_range(0x00, 0x13),
+	regmap_reg_range(0x18, 0x18),
+	regmap_reg_range(0x1a, 0x1c),
+	regmap_reg_range(0x1e, 0x22),
+	regmap_reg_range(0x25, 0x26),
+	regmap_reg_range(0x28, 0x28),
+	regmap_reg_range(0x2b, 0x67),
+	regmap_reg_range(0x7b, 0x7b),
+	regmap_reg_range(0x7f, 0x7f),
+	regmap_reg_range(0xb8, 0xff),
+};
+
+const struct regmap_access_table lan9303_register_set = {
+	.yes_ranges = lan9303_valid_regs,
+	.n_yes_ranges = ARRAY_SIZE(lan9303_valid_regs),
+	.no_ranges = lan9303_reserved_ranges,
+	.n_no_ranges = ARRAY_SIZE(lan9303_reserved_ranges),
+};
+EXPORT_SYMBOL(lan9303_register_set);
+
+/* Flow Control registers indexed by port number */
+static unsigned int flow_ctl_reg[] = {
+	LAN9303_MANUAL_FC_0,
+	LAN9303_MANUAL_FC_1,
+	LAN9303_MANUAL_FC_2
+};
+
+static int lan9303_read(struct regmap *regmap, unsigned int offset, u32 *reg)
+{
+	int ret, i;
+
+	/* we can lose arbitration for the I2C case, because the device
+	 * tries to detect and read an external EEPROM after reset and acts as
+	 * a master on the shared I2C bus itself. This conflicts with our
+	 * attempts to access the device as a slave at the same moment.
+	 */
+	for (i = 0; i < 5; i++) {
+		ret = regmap_read(regmap, offset, reg);
+		if (!ret)
+			return 0;
+		if (ret != -EAGAIN)
+			break;
+		msleep(500);
+	}
+
+	return -EIO;
+}
+
+static int lan9303_read_wait(struct lan9303 *chip, int offset, u32 mask)
+{
+	int i;
+
+	for (i = 0; i < 25; i++) {
+		u32 reg;
+		int ret;
+
+		ret = lan9303_read(chip->regmap, offset, &reg);
+		if (ret) {
+			dev_err(chip->dev, "%s failed to read offset %d: %d\n",
+				__func__, offset, ret);
+			return ret;
+		}
+		if (!(reg & mask))
+			return 0;
+		usleep_range(1000, 2000);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int lan9303_virt_phy_reg_read(struct lan9303 *chip, int regnum)
+{
+	int ret;
+	u32 val;
+
+	if (regnum > MII_EXPANSION)
+		return -EINVAL;
+
+	ret = lan9303_read(chip->regmap, LAN9303_VIRT_PHY_BASE + regnum, &val);
+	if (ret)
+		return ret;
+
+	return val & 0xffff;
+}
+
+static int lan9303_virt_phy_reg_write(struct lan9303 *chip, int regnum, u16 val)
+{
+	if (regnum > MII_EXPANSION)
+		return -EINVAL;
+
+	return regmap_write(chip->regmap, LAN9303_VIRT_PHY_BASE + regnum, val);
+}
+
+static int lan9303_indirect_phy_wait_for_completion(struct lan9303 *chip)
+{
+	return lan9303_read_wait(chip, LAN9303_PMI_ACCESS,
+				 LAN9303_PMI_ACCESS_MII_BUSY);
+}
+
+static int lan9303_indirect_phy_read(struct lan9303 *chip, int addr, int regnum)
+{
+	int ret;
+	u32 val;
+
+	val = LAN9303_PMI_ACCESS_PHY_ADDR(addr);
+	val |= LAN9303_PMI_ACCESS_MIIRINDA(regnum);
+
+	mutex_lock(&chip->indirect_mutex);
+
+	ret = lan9303_indirect_phy_wait_for_completion(chip);
+	if (ret)
+		goto on_error;
+
+	/* start the MII read cycle */
+	ret = regmap_write(chip->regmap, LAN9303_PMI_ACCESS, val);
+	if (ret)
+		goto on_error;
+
+	ret = lan9303_indirect_phy_wait_for_completion(chip);
+	if (ret)
+		goto on_error;
+
+	/* read the result of this operation */
+	ret = lan9303_read(chip->regmap, LAN9303_PMI_DATA, &val);
+	if (ret)
+		goto on_error;
+
+	mutex_unlock(&chip->indirect_mutex);
+
+	return val & 0xffff;
+
+on_error:
+	mutex_unlock(&chip->indirect_mutex);
+	return ret;
+}
+
+static int lan9303_indirect_phy_write(struct lan9303 *chip, int addr,
+				      int regnum, u16 val)
+{
+	int ret;
+	u32 reg;
+
+	reg = LAN9303_PMI_ACCESS_PHY_ADDR(addr);
+	reg |= LAN9303_PMI_ACCESS_MIIRINDA(regnum);
+	reg |= LAN9303_PMI_ACCESS_MII_WRITE;
+
+	mutex_lock(&chip->indirect_mutex);
+
+	ret = lan9303_indirect_phy_wait_for_completion(chip);
+	if (ret)
+		goto on_error;
+
+	/* write the data first... */
+	ret = regmap_write(chip->regmap, LAN9303_PMI_DATA, val);
+	if (ret)
+		goto on_error;
+
+	/* ...then start the MII write cycle */
+	ret = regmap_write(chip->regmap, LAN9303_PMI_ACCESS, reg);
+
+on_error:
+	mutex_unlock(&chip->indirect_mutex);
+	return ret;
+}
+
+const struct lan9303_phy_ops lan9303_indirect_phy_ops = {
+	.phy_read = lan9303_indirect_phy_read,
+	.phy_write = lan9303_indirect_phy_write,
+};
+EXPORT_SYMBOL_GPL(lan9303_indirect_phy_ops);
+
+static int lan9303_switch_wait_for_completion(struct lan9303 *chip)
+{
+	return lan9303_read_wait(chip, LAN9303_SWITCH_CSR_CMD,
+				 LAN9303_SWITCH_CSR_CMD_BUSY);
+}
+
+static int lan9303_write_switch_reg(struct lan9303 *chip, u16 regnum, u32 val)
+{
+	u32 reg;
+	int ret;
+
+	reg = regnum;
+	reg |= LAN9303_SWITCH_CSR_CMD_LANES;
+	reg |= LAN9303_SWITCH_CSR_CMD_BUSY;
+
+	mutex_lock(&chip->indirect_mutex);
+
+	ret = lan9303_switch_wait_for_completion(chip);
+	if (ret)
+		goto on_error;
+
+	ret = regmap_write(chip->regmap, LAN9303_SWITCH_CSR_DATA, val);
+	if (ret) {
+		dev_err(chip->dev, "Failed to write csr data reg: %d\n", ret);
+		goto on_error;
+	}
+
+	/* trigger write */
+	ret = regmap_write(chip->regmap, LAN9303_SWITCH_CSR_CMD, reg);
+	if (ret)
+		dev_err(chip->dev, "Failed to write csr command reg: %d\n",
+			ret);
+
+on_error:
+	mutex_unlock(&chip->indirect_mutex);
+	return ret;
+}
+
+static int lan9303_read_switch_reg(struct lan9303 *chip, u16 regnum, u32 *val)
+{
+	u32 reg;
+	int ret;
+
+	reg = regnum;
+	reg |= LAN9303_SWITCH_CSR_CMD_LANES;
+	reg |= LAN9303_SWITCH_CSR_CMD_RW;
+	reg |= LAN9303_SWITCH_CSR_CMD_BUSY;
+
+	mutex_lock(&chip->indirect_mutex);
+
+	ret = lan9303_switch_wait_for_completion(chip);
+	if (ret)
+		goto on_error;
+
+	/* trigger read */
+	ret = regmap_write(chip->regmap, LAN9303_SWITCH_CSR_CMD, reg);
+	if (ret) {
+		dev_err(chip->dev, "Failed to write csr command reg: %d\n",
+			ret);
+		goto on_error;
+	}
+
+	ret = lan9303_switch_wait_for_completion(chip);
+	if (ret)
+		goto on_error;
+
+	ret = lan9303_read(chip->regmap, LAN9303_SWITCH_CSR_DATA, val);
+	if (ret)
+		dev_err(chip->dev, "Failed to read csr data reg: %d\n", ret);
+on_error:
+	mutex_unlock(&chip->indirect_mutex);
+	return ret;
+}
+
+static int lan9303_write_switch_reg_mask(struct lan9303 *chip, u16 regnum,
+					 u32 val, u32 mask)
+{
+	int ret;
+	u32 reg;
+
+	ret = lan9303_read_switch_reg(chip, regnum, &reg);
+	if (ret)
+		return ret;
+
+	reg = (reg & ~mask) | val;
+
+	return lan9303_write_switch_reg(chip, regnum, reg);
+}
+
+static int lan9303_write_switch_port(struct lan9303 *chip, int port,
+				     u16 regnum, u32 val)
+{
+	return lan9303_write_switch_reg(
+		chip, LAN9303_SWITCH_PORT_REG(port, regnum), val);
+}
+
+static int lan9303_read_switch_port(struct lan9303 *chip, int port,
+				    u16 regnum, u32 *val)
+{
+	return lan9303_read_switch_reg(
+		chip, LAN9303_SWITCH_PORT_REG(port, regnum), val);
+}
+
+static int lan9303_detect_phy_setup(struct lan9303 *chip)
+{
+	int reg;
+
+	/* Calculate chip->phy_addr_base:
+	 * Depending on the 'phy_addr_sel_strap' setting, the three phys are
+	 * using IDs 0-1-2 or IDs 1-2-3. We cannot read back the
+	 * 'phy_addr_sel_strap' setting directly, so we need a test, which
+	 * configuration is active:
+	 * Special reg 18 of phy 3 reads as 0x0000, if 'phy_addr_sel_strap' is 0
+	 * and the IDs are 0-1-2, else it contains something different from
+	 * 0x0000, which means 'phy_addr_sel_strap' is 1 and the IDs are 1-2-3.
+	 * 0xffff is returned on MDIO read with no response.
+	 */
+	reg = chip->ops->phy_read(chip, 3, MII_LAN911X_SPECIAL_MODES);
+	if (reg < 0) {
+		dev_err(chip->dev, "Failed to detect phy config: %d\n", reg);
+		return reg;
+	}
+
+	chip->phy_addr_base = reg != 0 && reg != 0xffff;
+
+	dev_dbg(chip->dev, "Phy setup '%s' detected\n",
+		chip->phy_addr_base ? "1-2-3" : "0-1-2");
+
+	return 0;
+}
+
+/* Map ALR-port bits to port bitmap, and back */
+static const int alrport_2_portmap[] = {1, 2, 4, 0, 3, 5, 6, 7 };
+static const int portmap_2_alrport[] = {3, 0, 1, 4, 2, 5, 6, 7 };
+
+/* Return pointer to first free ALR cache entry, return NULL if none */
+static struct lan9303_alr_cache_entry *
+lan9303_alr_cache_find_free(struct lan9303 *chip)
+{
+	int i;
+	struct lan9303_alr_cache_entry *entr = chip->alr_cache;
+
+	for (i = 0; i < LAN9303_NUM_ALR_RECORDS; i++, entr++)
+		if (entr->port_map == 0)
+			return entr;
+
+	return NULL;
+}
+
+/* Return pointer to ALR cache entry matching MAC address */
+static struct lan9303_alr_cache_entry *
+lan9303_alr_cache_find_mac(struct lan9303 *chip, const u8 *mac_addr)
+{
+	int i;
+	struct lan9303_alr_cache_entry *entr = chip->alr_cache;
+
+	BUILD_BUG_ON_MSG(sizeof(struct lan9303_alr_cache_entry) & 1,
+			 "ether_addr_equal require u16 alignment");
+
+	for (i = 0; i < LAN9303_NUM_ALR_RECORDS; i++, entr++)
+		if (ether_addr_equal(entr->mac_addr, mac_addr))
+			return entr;
+
+	return NULL;
+}
+
+static int lan9303_csr_reg_wait(struct lan9303 *chip, int regno, u32 mask)
+{
+	int i;
+
+	for (i = 0; i < 25; i++) {
+		u32 reg;
+
+		lan9303_read_switch_reg(chip, regno, &reg);
+		if (!(reg & mask))
+			return 0;
+		usleep_range(1000, 2000);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int lan9303_alr_make_entry_raw(struct lan9303 *chip, u32 dat0, u32 dat1)
+{
+	lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_WR_DAT_0, dat0);
+	lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_WR_DAT_1, dat1);
+	lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD,
+				 LAN9303_ALR_CMD_MAKE_ENTRY);
+	lan9303_csr_reg_wait(chip, LAN9303_SWE_ALR_CMD_STS, ALR_STS_MAKE_PEND);
+	lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD, 0);
+
+	return 0;
+}
+
+typedef int alr_loop_cb_t(struct lan9303 *chip, u32 dat0, u32 dat1,
+			  int portmap, void *ctx);
+
+static int lan9303_alr_loop(struct lan9303 *chip, alr_loop_cb_t *cb, void *ctx)
+{
+	int ret = 0, i;
+
+	mutex_lock(&chip->alr_mutex);
+	lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD,
+				 LAN9303_ALR_CMD_GET_FIRST);
+	lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD, 0);
+
+	for (i = 1; i < LAN9303_NUM_ALR_RECORDS; i++) {
+		u32 dat0, dat1;
+		int alrport, portmap;
+
+		lan9303_read_switch_reg(chip, LAN9303_SWE_ALR_RD_DAT_0, &dat0);
+		lan9303_read_switch_reg(chip, LAN9303_SWE_ALR_RD_DAT_1, &dat1);
+		if (dat1 & LAN9303_ALR_DAT1_END_OF_TABL)
+			break;
+
+		alrport = (dat1 & LAN9303_ALR_DAT1_PORT_MASK) >>
+						LAN9303_ALR_DAT1_PORT_BITOFFS;
+		portmap = alrport_2_portmap[alrport];
+
+		ret = cb(chip, dat0, dat1, portmap, ctx);
+		if (ret)
+			break;
+
+		lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD,
+					 LAN9303_ALR_CMD_GET_NEXT);
+		lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD, 0);
+	}
+	mutex_unlock(&chip->alr_mutex);
+
+	return ret;
+}
+
+static void alr_reg_to_mac(u32 dat0, u32 dat1, u8 mac[6])
+{
+	mac[0] = (dat0 >>  0) & 0xff;
+	mac[1] = (dat0 >>  8) & 0xff;
+	mac[2] = (dat0 >> 16) & 0xff;
+	mac[3] = (dat0 >> 24) & 0xff;
+	mac[4] = (dat1 >>  0) & 0xff;
+	mac[5] = (dat1 >>  8) & 0xff;
+}
+
+struct del_port_learned_ctx {
+	int port;
+};
+
+/* Clear learned (non-static) entry on given port */
+static int alr_loop_cb_del_port_learned(struct lan9303 *chip, u32 dat0,
+					u32 dat1, int portmap, void *ctx)
+{
+	struct del_port_learned_ctx *del_ctx = ctx;
+	int port = del_ctx->port;
+
+	if (((BIT(port) & portmap) == 0) || (dat1 & LAN9303_ALR_DAT1_STATIC))
+		return 0;
+
+	/* learned entries has only one port, we can just delete */
+	dat1 &= ~LAN9303_ALR_DAT1_VALID; /* delete entry */
+	lan9303_alr_make_entry_raw(chip, dat0, dat1);
+
+	return 0;
+}
+
+struct port_fdb_dump_ctx {
+	int port;
+	void *data;
+	dsa_fdb_dump_cb_t *cb;
+};
+
+static int alr_loop_cb_fdb_port_dump(struct lan9303 *chip, u32 dat0,
+				     u32 dat1, int portmap, void *ctx)
+{
+	struct port_fdb_dump_ctx *dump_ctx = ctx;
+	u8 mac[ETH_ALEN];
+	bool is_static;
+
+	if ((BIT(dump_ctx->port) & portmap) == 0)
+		return 0;
+
+	alr_reg_to_mac(dat0, dat1, mac);
+	is_static = !!(dat1 & LAN9303_ALR_DAT1_STATIC);
+	return dump_ctx->cb(mac, 0, is_static, dump_ctx->data);
+}
+
+/* Set a static ALR entry. Delete entry if port_map is zero */
+static void lan9303_alr_set_entry(struct lan9303 *chip, const u8 *mac,
+				  u8 port_map, bool stp_override)
+{
+	u32 dat0, dat1, alr_port;
+
+	dev_dbg(chip->dev, "%s(%pM, %d)\n", __func__, mac, port_map);
+	dat1 = LAN9303_ALR_DAT1_STATIC;
+	if (port_map)
+		dat1 |= LAN9303_ALR_DAT1_VALID;
+	/* otherwise no ports: delete entry */
+	if (stp_override)
+		dat1 |= LAN9303_ALR_DAT1_AGE_OVERRID;
+
+	alr_port = portmap_2_alrport[port_map & 7];
+	dat1 &= ~LAN9303_ALR_DAT1_PORT_MASK;
+	dat1 |= alr_port << LAN9303_ALR_DAT1_PORT_BITOFFS;
+
+	dat0 = 0;
+	dat0 |= (mac[0] << 0);
+	dat0 |= (mac[1] << 8);
+	dat0 |= (mac[2] << 16);
+	dat0 |= (mac[3] << 24);
+
+	dat1 |= (mac[4] << 0);
+	dat1 |= (mac[5] << 8);
+
+	lan9303_alr_make_entry_raw(chip, dat0, dat1);
+}
+
+/* Add port to static ALR entry, create new static entry if needed */
+static int lan9303_alr_add_port(struct lan9303 *chip, const u8 *mac, int port,
+				bool stp_override)
+{
+	struct lan9303_alr_cache_entry *entr;
+
+	mutex_lock(&chip->alr_mutex);
+	entr = lan9303_alr_cache_find_mac(chip, mac);
+	if (!entr) { /*New entry */
+		entr = lan9303_alr_cache_find_free(chip);
+		if (!entr) {
+			mutex_unlock(&chip->alr_mutex);
+			return -ENOSPC;
+		}
+		ether_addr_copy(entr->mac_addr, mac);
+	}
+	entr->port_map |= BIT(port);
+	entr->stp_override = stp_override;
+	lan9303_alr_set_entry(chip, mac, entr->port_map, stp_override);
+	mutex_unlock(&chip->alr_mutex);
+
+	return 0;
+}
+
+/* Delete static port from ALR entry, delete entry if last port */
+static int lan9303_alr_del_port(struct lan9303 *chip, const u8 *mac, int port)
+{
+	struct lan9303_alr_cache_entry *entr;
+
+	mutex_lock(&chip->alr_mutex);
+	entr = lan9303_alr_cache_find_mac(chip, mac);
+	if (!entr)
+		goto out;  /* no static entry found */
+
+	entr->port_map &= ~BIT(port);
+	if (entr->port_map == 0) /* zero means its free again */
+		eth_zero_addr(entr->mac_addr);
+	lan9303_alr_set_entry(chip, mac, entr->port_map, entr->stp_override);
+
+out:
+	mutex_unlock(&chip->alr_mutex);
+	return 0;
+}
+
+static int lan9303_disable_processing_port(struct lan9303 *chip,
+					   unsigned int port)
+{
+	int ret;
+
+	/* disable RX, but keep register reset default values else */
+	ret = lan9303_write_switch_port(chip, port, LAN9303_MAC_RX_CFG_0,
+					LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES);
+	if (ret)
+		return ret;
+
+	/* disable TX, but keep register reset default values else */
+	return lan9303_write_switch_port(chip, port, LAN9303_MAC_TX_CFG_0,
+				LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT |
+				LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE);
+}
+
+static int lan9303_enable_processing_port(struct lan9303 *chip,
+					  unsigned int port)
+{
+	int ret;
+
+	/* enable RX and keep register reset default values else */
+	ret = lan9303_write_switch_port(chip, port, LAN9303_MAC_RX_CFG_0,
+					LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES |
+					LAN9303_MAC_RX_CFG_X_RX_ENABLE);
+	if (ret)
+		return ret;
+
+	/* enable TX and keep register reset default values else */
+	return lan9303_write_switch_port(chip, port, LAN9303_MAC_TX_CFG_0,
+				LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT |
+				LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE |
+				LAN9303_MAC_TX_CFG_X_TX_ENABLE);
+}
+
+/* forward special tagged packets from port 0 to port 1 *or* port 2 */
+static int lan9303_setup_tagging(struct lan9303 *chip)
+{
+	int ret;
+	u32 val;
+	/* enable defining the destination port via special VLAN tagging
+	 * for port 0
+	 */
+	ret = lan9303_write_switch_reg(chip, LAN9303_SWE_INGRESS_PORT_TYPE,
+				       LAN9303_SWE_INGRESS_PORT_TYPE_VLAN);
+	if (ret)
+		return ret;
+
+	/* tag incoming packets at port 1 and 2 on their way to port 0 to be
+	 * able to discover their source port
+	 */
+	val = LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT0;
+	return lan9303_write_switch_reg(chip, LAN9303_BM_EGRSS_PORT_TYPE, val);
+}
+
+/* We want a special working switch:
+ * - do not forward packets between port 1 and 2
+ * - forward everything from port 1 to port 0
+ * - forward everything from port 2 to port 0
+ */
+static int lan9303_separate_ports(struct lan9303 *chip)
+{
+	int ret;
+
+	lan9303_alr_del_port(chip, eth_stp_addr, 0);
+	ret = lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_MIRROR,
+				LAN9303_SWE_PORT_MIRROR_SNIFFER_PORT0 |
+				LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT1 |
+				LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT2 |
+				LAN9303_SWE_PORT_MIRROR_ENABLE_RX_MIRRORING |
+				LAN9303_SWE_PORT_MIRROR_SNIFF_ALL);
+	if (ret)
+		return ret;
+
+	/* prevent port 1 and 2 from forwarding packets by their own */
+	return lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_STATE,
+				LAN9303_SWE_PORT_STATE_FORWARDING_PORT0 |
+				LAN9303_SWE_PORT_STATE_BLOCKING_PORT1 |
+				LAN9303_SWE_PORT_STATE_BLOCKING_PORT2);
+}
+
+static void lan9303_bridge_ports(struct lan9303 *chip)
+{
+	/* ports bridged: remove mirroring */
+	lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_MIRROR,
+				 LAN9303_SWE_PORT_MIRROR_DISABLED);
+
+	lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_STATE,
+				 chip->swe_port_state);
+	lan9303_alr_add_port(chip, eth_stp_addr, 0, true);
+}
+
+static void lan9303_handle_reset(struct lan9303 *chip)
+{
+	if (!chip->reset_gpio)
+		return;
+
+	if (chip->reset_duration != 0)
+		msleep(chip->reset_duration);
+
+	/* release (deassert) reset and activate the device */
+	gpiod_set_value_cansleep(chip->reset_gpio, 0);
+}
+
+/* stop processing packets for all ports */
+static int lan9303_disable_processing(struct lan9303 *chip)
+{
+	int p;
+
+	for (p = 1; p < LAN9303_NUM_PORTS; p++) {
+		int ret = lan9303_disable_processing_port(chip, p);
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int lan9303_check_device(struct lan9303 *chip)
+{
+	int ret;
+	u32 reg;
+
+	ret = lan9303_read(chip->regmap, LAN9303_CHIP_REV, &reg);
+	if (ret) {
+		dev_err(chip->dev, "failed to read chip revision register: %d\n",
+			ret);
+		return ret;
+	}
+
+	if (((reg >> 16) != LAN9303_CHIP_ID) &&
+	    ((reg >> 16) != LAN9354_CHIP_ID)) {
+		dev_err(chip->dev, "unexpected device found: LAN%4.4X\n",
+			reg >> 16);
+		return -ENODEV;
+	}
+
+	/* The default state of the LAN9303 device is to forward packets between
+	 * all ports (if not configured differently by an external EEPROM).
+	 * The initial state of a DSA device must be forwarding packets only
+	 * between the external and the internal ports and no forwarding
+	 * between the external ports. In preparation we stop packet handling
+	 * at all for now until the LAN9303 device is re-programmed accordingly.
+	 */
+	ret = lan9303_disable_processing(chip);
+	if (ret)
+		dev_warn(chip->dev, "failed to disable switching %d\n", ret);
+
+	dev_info(chip->dev, "Found LAN%4.4X rev. %u\n", (reg >> 16), reg & 0xffff);
+
+	ret = lan9303_detect_phy_setup(chip);
+	if (ret) {
+		dev_err(chip->dev,
+			"failed to discover phy bootstrap setup: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/* ---------------------------- DSA -----------------------------------*/
+
+static enum dsa_tag_protocol lan9303_get_tag_protocol(struct dsa_switch *ds,
+						      int port,
+						      enum dsa_tag_protocol mp)
+{
+	return DSA_TAG_PROTO_LAN9303;
+}
+
+static int lan9303_setup(struct dsa_switch *ds)
+{
+	struct lan9303 *chip = ds->priv;
+	int ret;
+	u32 reg;
+
+	/* Make sure that port 0 is the cpu port */
+	if (!dsa_is_cpu_port(ds, 0)) {
+		dev_err(chip->dev, "port 0 is not the CPU port\n");
+		return -EINVAL;
+	}
+
+	/* Virtual Phy: Remove Turbo 200Mbit mode */
+	ret = lan9303_read(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, &reg);
+	if (ret)
+		return (ret);
+
+	/* Clear the TURBO Mode bit if it was set. */
+	if (reg & LAN9303_VIRT_SPECIAL_TURBO) {
+		reg &= ~LAN9303_VIRT_SPECIAL_TURBO;
+		regmap_write(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, reg);
+	}
+
+	ret = lan9303_setup_tagging(chip);
+	if (ret)
+		dev_err(chip->dev, "failed to setup port tagging %d\n", ret);
+
+	ret = lan9303_separate_ports(chip);
+	if (ret)
+		dev_err(chip->dev, "failed to separate ports %d\n", ret);
+
+	ret = lan9303_enable_processing_port(chip, 0);
+	if (ret)
+		dev_err(chip->dev, "failed to re-enable switching %d\n", ret);
+
+	/* Trap IGMP to port 0 */
+	ret = lan9303_write_switch_reg_mask(chip, LAN9303_SWE_GLB_INGRESS_CFG,
+					    LAN9303_SWE_GLB_INGR_IGMP_TRAP |
+					    LAN9303_SWE_GLB_INGR_IGMP_PORT(0),
+					    LAN9303_SWE_GLB_INGR_IGMP_PORT(1) |
+					    LAN9303_SWE_GLB_INGR_IGMP_PORT(2));
+	if (ret)
+		dev_err(chip->dev, "failed to setup IGMP trap %d\n", ret);
+
+	return 0;
+}
+
+struct lan9303_mib_desc {
+	unsigned int offset; /* offset of first MAC */
+	const char *name;
+};
+
+static const struct lan9303_mib_desc lan9303_mib[] = {
+	{ .offset = LAN9303_MAC_RX_BRDCST_CNT_0, .name = "RxBroad", },
+	{ .offset = LAN9303_MAC_RX_PAUSE_CNT_0, .name = "RxPause", },
+	{ .offset = LAN9303_MAC_RX_MULCST_CNT_0, .name = "RxMulti", },
+	{ .offset = LAN9303_MAC_RX_PKTOK_CNT_0, .name = "RxOk", },
+	{ .offset = LAN9303_MAC_RX_CRCERR_CNT_0, .name = "RxCrcErr", },
+	{ .offset = LAN9303_MAC_RX_ALIGN_CNT_0, .name = "RxAlignErr", },
+	{ .offset = LAN9303_MAC_RX_JABB_CNT_0, .name = "RxJabber", },
+	{ .offset = LAN9303_MAC_RX_FRAG_CNT_0, .name = "RxFragment", },
+	{ .offset = LAN9303_MAC_RX_64_CNT_0, .name = "Rx64Byte", },
+	{ .offset = LAN9303_MAC_RX_127_CNT_0, .name = "Rx128Byte", },
+	{ .offset = LAN9303_MAC_RX_255_CNT_0, .name = "Rx256Byte", },
+	{ .offset = LAN9303_MAC_RX_511_CNT_0, .name = "Rx512Byte", },
+	{ .offset = LAN9303_MAC_RX_1023_CNT_0, .name = "Rx1024Byte", },
+	{ .offset = LAN9303_MAC_RX_MAX_CNT_0, .name = "RxMaxByte", },
+	{ .offset = LAN9303_MAC_RX_PKTLEN_CNT_0, .name = "RxByteCnt", },
+	{ .offset = LAN9303_MAC_RX_SYMBL_CNT_0, .name = "RxSymbolCnt", },
+	{ .offset = LAN9303_MAC_RX_CTLFRM_CNT_0, .name = "RxCfs", },
+	{ .offset = LAN9303_MAC_RX_OVRSZE_CNT_0, .name = "RxOverFlow", },
+	{ .offset = LAN9303_MAC_TX_UNDSZE_CNT_0, .name = "TxShort", },
+	{ .offset = LAN9303_MAC_TX_BRDCST_CNT_0, .name = "TxBroad", },
+	{ .offset = LAN9303_MAC_TX_PAUSE_CNT_0, .name = "TxPause", },
+	{ .offset = LAN9303_MAC_TX_MULCST_CNT_0, .name = "TxMulti", },
+	{ .offset = LAN9303_MAC_RX_UNDSZE_CNT_0, .name = "RxShort", },
+	{ .offset = LAN9303_MAC_TX_64_CNT_0, .name = "Tx64Byte", },
+	{ .offset = LAN9303_MAC_TX_127_CNT_0, .name = "Tx128Byte", },
+	{ .offset = LAN9303_MAC_TX_255_CNT_0, .name = "Tx256Byte", },
+	{ .offset = LAN9303_MAC_TX_511_CNT_0, .name = "Tx512Byte", },
+	{ .offset = LAN9303_MAC_TX_1023_CNT_0, .name = "Tx1024Byte", },
+	{ .offset = LAN9303_MAC_TX_MAX_CNT_0, .name = "TxMaxByte", },
+	{ .offset = LAN9303_MAC_TX_PKTLEN_CNT_0, .name = "TxByteCnt", },
+	{ .offset = LAN9303_MAC_TX_PKTOK_CNT_0, .name = "TxOk", },
+	{ .offset = LAN9303_MAC_TX_TOTALCOL_CNT_0, .name = "TxCollision", },
+	{ .offset = LAN9303_MAC_TX_MULTICOL_CNT_0, .name = "TxMultiCol", },
+	{ .offset = LAN9303_MAC_TX_SNGLECOL_CNT_0, .name = "TxSingleCol", },
+	{ .offset = LAN9303_MAC_TX_EXCOL_CNT_0, .name = "TxExcCol", },
+	{ .offset = LAN9303_MAC_TX_DEFER_CNT_0, .name = "TxDefer", },
+	{ .offset = LAN9303_MAC_TX_LATECOL_0, .name = "TxLateCol", },
+};
+
+static void lan9303_get_strings(struct dsa_switch *ds, int port,
+				u32 stringset, uint8_t *data)
+{
+	unsigned int u;
+
+	if (stringset != ETH_SS_STATS)
+		return;
+
+	for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++) {
+		strncpy(data + u * ETH_GSTRING_LEN, lan9303_mib[u].name,
+			ETH_GSTRING_LEN);
+	}
+}
+
+static void lan9303_get_ethtool_stats(struct dsa_switch *ds, int port,
+				      uint64_t *data)
+{
+	struct lan9303 *chip = ds->priv;
+	unsigned int u;
+
+	for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++) {
+		u32 reg;
+		int ret;
+
+		ret = lan9303_read_switch_port(
+			chip, port, lan9303_mib[u].offset, &reg);
+
+		if (ret) {
+			dev_warn(chip->dev, "Reading status port %d reg %u failed\n",
+				 port, lan9303_mib[u].offset);
+			reg = 0;
+		}
+		data[u] = reg;
+	}
+}
+
+static int lan9303_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+	if (sset != ETH_SS_STATS)
+		return 0;
+
+	return ARRAY_SIZE(lan9303_mib);
+}
+
+static int lan9303_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+	struct lan9303 *chip = ds->priv;
+	int phy_base = chip->phy_addr_base;
+
+	if (phy == phy_base)
+		return lan9303_virt_phy_reg_read(chip, regnum);
+	if (phy > phy_base + 2)
+		return -ENODEV;
+
+	return chip->ops->phy_read(chip, phy, regnum);
+}
+
+static int lan9303_phy_write(struct dsa_switch *ds, int phy, int regnum,
+			     u16 val)
+{
+	struct lan9303 *chip = ds->priv;
+	int phy_base = chip->phy_addr_base;
+
+	if (phy == phy_base)
+		return lan9303_virt_phy_reg_write(chip, regnum, val);
+	if (phy > phy_base + 2)
+		return -ENODEV;
+
+	return chip->ops->phy_write(chip, phy, regnum, val);
+}
+
+static int lan9303_port_enable(struct dsa_switch *ds, int port,
+			       struct phy_device *phy)
+{
+	struct dsa_port *dp = dsa_to_port(ds, port);
+	struct lan9303 *chip = ds->priv;
+
+	if (!dsa_port_is_user(dp))
+		return 0;
+
+	vlan_vid_add(dsa_port_to_master(dp), htons(ETH_P_8021Q), port);
+
+	return lan9303_enable_processing_port(chip, port);
+}
+
+static void lan9303_port_disable(struct dsa_switch *ds, int port)
+{
+	struct dsa_port *dp = dsa_to_port(ds, port);
+	struct lan9303 *chip = ds->priv;
+
+	if (!dsa_port_is_user(dp))
+		return;
+
+	vlan_vid_del(dsa_port_to_master(dp), htons(ETH_P_8021Q), port);
+
+	lan9303_disable_processing_port(chip, port);
+	lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN);
+}
+
+static int lan9303_port_bridge_join(struct dsa_switch *ds, int port,
+				    struct dsa_bridge bridge,
+				    bool *tx_fwd_offload,
+				    struct netlink_ext_ack *extack)
+{
+	struct lan9303 *chip = ds->priv;
+
+	dev_dbg(chip->dev, "%s(port %d)\n", __func__, port);
+	if (dsa_port_bridge_same(dsa_to_port(ds, 1), dsa_to_port(ds, 2))) {
+		lan9303_bridge_ports(chip);
+		chip->is_bridged = true;  /* unleash stp_state_set() */
+	}
+
+	return 0;
+}
+
+static void lan9303_port_bridge_leave(struct dsa_switch *ds, int port,
+				      struct dsa_bridge bridge)
+{
+	struct lan9303 *chip = ds->priv;
+
+	dev_dbg(chip->dev, "%s(port %d)\n", __func__, port);
+	if (chip->is_bridged) {
+		lan9303_separate_ports(chip);
+		chip->is_bridged = false;
+	}
+}
+
+static void lan9303_port_stp_state_set(struct dsa_switch *ds, int port,
+				       u8 state)
+{
+	int portmask, portstate;
+	struct lan9303 *chip = ds->priv;
+
+	dev_dbg(chip->dev, "%s(port %d, state %d)\n",
+		__func__, port, state);
+
+	switch (state) {
+	case BR_STATE_DISABLED:
+		portstate = LAN9303_SWE_PORT_STATE_DISABLED_PORT0;
+		break;
+	case BR_STATE_BLOCKING:
+	case BR_STATE_LISTENING:
+		portstate = LAN9303_SWE_PORT_STATE_BLOCKING_PORT0;
+		break;
+	case BR_STATE_LEARNING:
+		portstate = LAN9303_SWE_PORT_STATE_LEARNING_PORT0;
+		break;
+	case BR_STATE_FORWARDING:
+		portstate = LAN9303_SWE_PORT_STATE_FORWARDING_PORT0;
+		break;
+	default:
+		portstate = LAN9303_SWE_PORT_STATE_DISABLED_PORT0;
+		dev_err(chip->dev, "unknown stp state: port %d, state %d\n",
+			port, state);
+	}
+
+	portmask = 0x3 << (port * 2);
+	portstate <<= (port * 2);
+
+	chip->swe_port_state = (chip->swe_port_state & ~portmask) | portstate;
+
+	if (chip->is_bridged)
+		lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_STATE,
+					 chip->swe_port_state);
+	/* else: touching SWE_PORT_STATE would break port separation */
+}
+
+static void lan9303_port_fast_age(struct dsa_switch *ds, int port)
+{
+	struct lan9303 *chip = ds->priv;
+	struct del_port_learned_ctx del_ctx = {
+		.port = port,
+	};
+
+	dev_dbg(chip->dev, "%s(%d)\n", __func__, port);
+	lan9303_alr_loop(chip, alr_loop_cb_del_port_learned, &del_ctx);
+}
+
+static int lan9303_port_fdb_add(struct dsa_switch *ds, int port,
+				const unsigned char *addr, u16 vid,
+				struct dsa_db db)
+{
+	struct lan9303 *chip = ds->priv;
+
+	dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, addr, vid);
+
+	return lan9303_alr_add_port(chip, addr, port, false);
+}
+
+static int lan9303_port_fdb_del(struct dsa_switch *ds, int port,
+				const unsigned char *addr, u16 vid,
+				struct dsa_db db)
+{
+	struct lan9303 *chip = ds->priv;
+
+	dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, addr, vid);
+	lan9303_alr_del_port(chip, addr, port);
+
+	return 0;
+}
+
+static int lan9303_port_fdb_dump(struct dsa_switch *ds, int port,
+				 dsa_fdb_dump_cb_t *cb, void *data)
+{
+	struct lan9303 *chip = ds->priv;
+	struct port_fdb_dump_ctx dump_ctx = {
+		.port = port,
+		.data = data,
+		.cb   = cb,
+	};
+
+	dev_dbg(chip->dev, "%s(%d)\n", __func__, port);
+	return lan9303_alr_loop(chip, alr_loop_cb_fdb_port_dump, &dump_ctx);
+}
+
+static int lan9303_port_mdb_prepare(struct dsa_switch *ds, int port,
+				    const struct switchdev_obj_port_mdb *mdb)
+{
+	struct lan9303 *chip = ds->priv;
+
+	dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, mdb->addr,
+		mdb->vid);
+	if (mdb->vid)
+		return -EOPNOTSUPP;
+	if (lan9303_alr_cache_find_mac(chip, mdb->addr))
+		return 0;
+	if (!lan9303_alr_cache_find_free(chip))
+		return -ENOSPC;
+
+	return 0;
+}
+
+static int lan9303_port_mdb_add(struct dsa_switch *ds, int port,
+				const struct switchdev_obj_port_mdb *mdb,
+				struct dsa_db db)
+{
+	struct lan9303 *chip = ds->priv;
+	int err;
+
+	err = lan9303_port_mdb_prepare(ds, port, mdb);
+	if (err)
+		return err;
+
+	dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, mdb->addr,
+		mdb->vid);
+	return lan9303_alr_add_port(chip, mdb->addr, port, false);
+}
+
+static int lan9303_port_mdb_del(struct dsa_switch *ds, int port,
+				const struct switchdev_obj_port_mdb *mdb,
+				struct dsa_db db)
+{
+	struct lan9303 *chip = ds->priv;
+
+	dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, mdb->addr,
+		mdb->vid);
+	if (mdb->vid)
+		return -EOPNOTSUPP;
+	lan9303_alr_del_port(chip, mdb->addr, port);
+
+	return 0;
+}
+
+static void lan9303_phylink_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
+{
+	struct lan9303 *chip = ds->priv;
+
+	dev_dbg(chip->dev, "%s(%d) entered.", __func__, port);
+
+	config->mac_capabilities = MAC_10 | MAC_100 | MAC_ASYM_PAUSE |
+				   MAC_SYM_PAUSE;
+
+	if (port == 0) {
+		__set_bit(PHY_INTERFACE_MODE_RMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_MII,
+			  config->supported_interfaces);
+	} else {
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
+		/* Compatibility for phylib's default interface type when the
+		 * phy-mode property is absent
+		 */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+	}
+}
+
+static void lan9303_phylink_mac_link_up(struct dsa_switch *ds, int port,
+					unsigned int mode,
+					phy_interface_t interface,
+					struct phy_device *phydev, int speed,
+					int duplex, bool tx_pause,
+					bool rx_pause)
+{
+	struct lan9303 *chip = ds->priv;
+	u32 ctl;
+	u32 reg;
+
+	/* On this device, we are only interested in doing something here if
+	 * this is the xMII port. All other ports are 10/100 phys using MDIO
+	 * to control there link settings.
+	 */
+	if (!IS_PORT_XMII(port))
+		return;
+
+	/* Disable auto-negotiation and force the speed/duplex settings. */
+	ctl = lan9303_phy_read(ds, port, MII_BMCR);
+	ctl &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
+	if (speed == SPEED_100)
+		ctl |= BMCR_SPEED100;
+	if (duplex == DUPLEX_FULL)
+		ctl |= BMCR_FULLDPLX;
+	lan9303_phy_write(ds, port, MII_BMCR, ctl);
+
+	/* Force the flow control settings. */
+	lan9303_read(chip->regmap, flow_ctl_reg[port], &reg);
+	reg &= ~(LAN9303_BP_EN | LAN9303_RX_FC_EN | LAN9303_TX_FC_EN);
+	if (rx_pause)
+		reg |= (LAN9303_RX_FC_EN | LAN9303_BP_EN);
+	if (tx_pause)
+		reg |= LAN9303_TX_FC_EN;
+	regmap_write(chip->regmap, flow_ctl_reg[port], reg);
+}
+
+static const struct dsa_switch_ops lan9303_switch_ops = {
+	.get_tag_protocol	= lan9303_get_tag_protocol,
+	.setup			= lan9303_setup,
+	.get_strings		= lan9303_get_strings,
+	.phy_read		= lan9303_phy_read,
+	.phy_write		= lan9303_phy_write,
+	.phylink_get_caps	= lan9303_phylink_get_caps,
+	.phylink_mac_link_up	= lan9303_phylink_mac_link_up,
+	.get_ethtool_stats	= lan9303_get_ethtool_stats,
+	.get_sset_count		= lan9303_get_sset_count,
+	.port_enable		= lan9303_port_enable,
+	.port_disable		= lan9303_port_disable,
+	.port_bridge_join	= lan9303_port_bridge_join,
+	.port_bridge_leave	= lan9303_port_bridge_leave,
+	.port_stp_state_set	= lan9303_port_stp_state_set,
+	.port_fast_age		= lan9303_port_fast_age,
+	.port_fdb_add		= lan9303_port_fdb_add,
+	.port_fdb_del		= lan9303_port_fdb_del,
+	.port_fdb_dump		= lan9303_port_fdb_dump,
+	.port_mdb_add		= lan9303_port_mdb_add,
+	.port_mdb_del		= lan9303_port_mdb_del,
+};
+
+static int lan9303_register_switch(struct lan9303 *chip)
+{
+	int base;
+
+	chip->ds = devm_kzalloc(chip->dev, sizeof(*chip->ds), GFP_KERNEL);
+	if (!chip->ds)
+		return -ENOMEM;
+
+	chip->ds->dev = chip->dev;
+	chip->ds->num_ports = LAN9303_NUM_PORTS;
+	chip->ds->priv = chip;
+	chip->ds->ops = &lan9303_switch_ops;
+	base = chip->phy_addr_base;
+	chip->ds->phys_mii_mask = GENMASK(LAN9303_NUM_PORTS - 1 + base, base);
+
+	return dsa_register_switch(chip->ds);
+}
+
+static int lan9303_probe_reset_gpio(struct lan9303 *chip,
+				     struct device_node *np)
+{
+	chip->reset_gpio = devm_gpiod_get_optional(chip->dev, "reset",
+						   GPIOD_OUT_HIGH);
+	if (IS_ERR(chip->reset_gpio))
+		return PTR_ERR(chip->reset_gpio);
+
+	if (!chip->reset_gpio) {
+		dev_dbg(chip->dev, "No reset GPIO defined\n");
+		return 0;
+	}
+
+	chip->reset_duration = 200;
+
+	if (np) {
+		of_property_read_u32(np, "reset-duration",
+				     &chip->reset_duration);
+	} else {
+		dev_dbg(chip->dev, "reset duration defaults to 200 ms\n");
+	}
+
+	/* A sane reset duration should not be longer than 1s */
+	if (chip->reset_duration > 1000)
+		chip->reset_duration = 1000;
+
+	return 0;
+}
+
+int lan9303_probe(struct lan9303 *chip, struct device_node *np)
+{
+	int ret;
+	u32 reg;
+
+	mutex_init(&chip->indirect_mutex);
+	mutex_init(&chip->alr_mutex);
+
+	ret = lan9303_probe_reset_gpio(chip, np);
+	if (ret)
+		return ret;
+
+	lan9303_handle_reset(chip);
+
+	/* First read to the device.  This is a Dummy read to ensure MDIO */
+	/* access is in 32-bit sync. */
+	ret = lan9303_read(chip->regmap, LAN9303_BYTE_ORDER, &reg);
+	if (ret) {
+		dev_err(chip->dev, "failed to access the device: %d\n",
+			ret);
+		if (!chip->reset_gpio) {
+			dev_dbg(chip->dev,
+				"hint: maybe failed due to missing reset GPIO\n");
+		}
+		return ret;
+	}
+
+	ret = lan9303_check_device(chip);
+	if (ret)
+		return ret;
+
+	ret = lan9303_register_switch(chip);
+	if (ret) {
+		dev_dbg(chip->dev, "Failed to register switch: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(lan9303_probe);
+
+int lan9303_remove(struct lan9303 *chip)
+{
+	int rc;
+
+	rc = lan9303_disable_processing(chip);
+	if (rc != 0)
+		dev_warn(chip->dev, "shutting down failed\n");
+
+	dsa_unregister_switch(chip->ds);
+
+	/* assert reset to the whole device to prevent it from doing anything */
+	gpiod_set_value_cansleep(chip->reset_gpio, 1);
+
+	return 0;
+}
+EXPORT_SYMBOL(lan9303_remove);
+
+void lan9303_shutdown(struct lan9303 *chip)
+{
+	dsa_switch_shutdown(chip->ds);
+}
+EXPORT_SYMBOL(lan9303_shutdown);
+
+MODULE_AUTHOR("Juergen Borleis <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("Core driver for SMSC/Microchip LAN9303 three port ethernet switch");
+MODULE_LICENSE("GPL v2");