summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/atheros/atl1e
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/ethernet/atheros/atl1e
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/ethernet/atheros/atl1e')
-rw-r--r--drivers/net/ethernet/atheros/atl1e/Makefile3
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e.h492
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c382
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_hw.c637
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_hw.h677
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_main.c2566
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_param.c256
7 files changed, 5013 insertions, 0 deletions
diff --git a/drivers/net/ethernet/atheros/atl1e/Makefile b/drivers/net/ethernet/atheros/atl1e/Makefile
new file mode 100644
index 0000000000..8506694054
--- /dev/null
+++ b/drivers/net/ethernet/atheros/atl1e/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_ATL1E) += atl1e.o
+atl1e-objs += atl1e_main.o atl1e_hw.o atl1e_ethtool.o atl1e_param.o
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h
new file mode 100644
index 0000000000..9fcad783c9
--- /dev/null
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h
@@ -0,0 +1,492 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ * Copyright(c) 2007 xiong huang <xiong.huang@atheros.com>
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ */
+
+#ifndef _ATL1E_H_
+#define _ATL1E_H_
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/udp.h>
+#include <linux/mii.h>
+#include <linux/io.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/tcp.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/workqueue.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+
+#include "atl1e_hw.h"
+
+#define PCI_REG_COMMAND 0x04 /* PCI Command Register */
+#define CMD_IO_SPACE 0x0001
+#define CMD_MEMORY_SPACE 0x0002
+#define CMD_BUS_MASTER 0x0004
+
+#define BAR_0 0
+#define BAR_1 1
+#define BAR_5 5
+
+/* Wake Up Filter Control */
+#define AT_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define AT_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define AT_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define AT_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */
+#define AT_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+
+#define SPEED_0 0xffff
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+/* Error Codes */
+#define AT_ERR_EEPROM 1
+#define AT_ERR_PHY 2
+#define AT_ERR_CONFIG 3
+#define AT_ERR_PARAM 4
+#define AT_ERR_MAC_TYPE 5
+#define AT_ERR_PHY_TYPE 6
+#define AT_ERR_PHY_SPEED 7
+#define AT_ERR_PHY_RES 8
+#define AT_ERR_TIMEOUT 9
+
+#define MAX_JUMBO_FRAME_SIZE 0x2000
+
+#define AT_VLAN_TAG_TO_TPD_TAG(_vlan, _tpd) \
+ _tpd = (((_vlan) << (4)) | (((_vlan) >> 13) & 7) |\
+ (((_vlan) >> 9) & 8))
+
+#define AT_TPD_TAG_TO_VLAN_TAG(_tpd, _vlan) \
+ _vlan = (((_tpd) >> 8) | (((_tpd) & 0x77) << 9) |\
+ (((_tdp) & 0x88) << 5))
+
+#define AT_MAX_RECEIVE_QUEUE 4
+#define AT_PAGE_NUM_PER_QUEUE 2
+
+#define AT_DMA_HI_ADDR_MASK 0xffffffff00000000ULL
+#define AT_DMA_LO_ADDR_MASK 0x00000000ffffffffULL
+
+#define AT_TX_WATCHDOG (5 * HZ)
+#define AT_MAX_INT_WORK 10
+#define AT_TWSI_EEPROM_TIMEOUT 100
+#define AT_HW_MAX_IDLE_DELAY 10
+#define AT_SUSPEND_LINK_TIMEOUT 28
+
+#define AT_REGS_LEN 75
+#define AT_EEPROM_LEN 512
+#define AT_ADV_MASK (ADVERTISE_10_HALF |\
+ ADVERTISE_10_FULL |\
+ ADVERTISE_100_HALF |\
+ ADVERTISE_100_FULL |\
+ ADVERTISE_1000_FULL)
+
+/* tpd word 2 */
+#define TPD_BUFLEN_MASK 0x3FFF
+#define TPD_BUFLEN_SHIFT 0
+#define TPD_DMAINT_MASK 0x0001
+#define TPD_DMAINT_SHIFT 14
+#define TPD_PKTNT_MASK 0x0001
+#define TPD_PKTINT_SHIFT 15
+#define TPD_VLANTAG_MASK 0xFFFF
+#define TPD_VLAN_SHIFT 16
+
+/* tpd word 3 bits 0:4 */
+#define TPD_EOP_MASK 0x0001
+#define TPD_EOP_SHIFT 0
+#define TPD_IP_VERSION_MASK 0x0001
+#define TPD_IP_VERSION_SHIFT 1 /* 0 : IPV4, 1 : IPV6 */
+#define TPD_INS_VL_TAG_MASK 0x0001
+#define TPD_INS_VL_TAG_SHIFT 2
+#define TPD_CC_SEGMENT_EN_MASK 0x0001
+#define TPD_CC_SEGMENT_EN_SHIFT 3
+#define TPD_SEGMENT_EN_MASK 0x0001
+#define TPD_SEGMENT_EN_SHIFT 4
+
+/* tdp word 3 bits 5:7 if ip version is 0 */
+#define TPD_IP_CSUM_MASK 0x0001
+#define TPD_IP_CSUM_SHIFT 5
+#define TPD_TCP_CSUM_MASK 0x0001
+#define TPD_TCP_CSUM_SHIFT 6
+#define TPD_UDP_CSUM_MASK 0x0001
+#define TPD_UDP_CSUM_SHIFT 7
+
+/* tdp word 3 bits 5:7 if ip version is 1 */
+#define TPD_V6_IPHLLO_MASK 0x0007
+#define TPD_V6_IPHLLO_SHIFT 7
+
+/* tpd word 3 bits 8:9 bit */
+#define TPD_VL_TAGGED_MASK 0x0001
+#define TPD_VL_TAGGED_SHIFT 8
+#define TPD_ETHTYPE_MASK 0x0001
+#define TPD_ETHTYPE_SHIFT 9
+
+/* tdp word 3 bits 10:13 if ip version is 0 */
+#define TDP_V4_IPHL_MASK 0x000F
+#define TPD_V4_IPHL_SHIFT 10
+
+/* tdp word 3 bits 10:13 if ip version is 1 */
+#define TPD_V6_IPHLHI_MASK 0x000F
+#define TPD_V6_IPHLHI_SHIFT 10
+
+/* tpd word 3 bit 14:31 if segment enabled */
+#define TPD_TCPHDRLEN_MASK 0x000F
+#define TPD_TCPHDRLEN_SHIFT 14
+#define TPD_HDRFLAG_MASK 0x0001
+#define TPD_HDRFLAG_SHIFT 18
+#define TPD_MSS_MASK 0x1FFF
+#define TPD_MSS_SHIFT 19
+
+/* tdp word 3 bit 16:31 if custom csum enabled */
+#define TPD_PLOADOFFSET_MASK 0x00FF
+#define TPD_PLOADOFFSET_SHIFT 16
+#define TPD_CCSUMOFFSET_MASK 0x00FF
+#define TPD_CCSUMOFFSET_SHIFT 24
+
+struct atl1e_tpd_desc {
+ __le64 buffer_addr;
+ __le32 word2;
+ __le32 word3;
+};
+
+/* how about 0x2000 */
+#define MAX_TX_BUF_LEN 0x2000
+#define MAX_TX_BUF_SHIFT 13
+#define MAX_TSO_SEG_SIZE 0x3c00
+
+/* rrs word 1 bit 0:31 */
+#define RRS_RX_CSUM_MASK 0xFFFF
+#define RRS_RX_CSUM_SHIFT 0
+#define RRS_PKT_SIZE_MASK 0x3FFF
+#define RRS_PKT_SIZE_SHIFT 16
+#define RRS_CPU_NUM_MASK 0x0003
+#define RRS_CPU_NUM_SHIFT 30
+
+#define RRS_IS_RSS_IPV4 0x0001
+#define RRS_IS_RSS_IPV4_TCP 0x0002
+#define RRS_IS_RSS_IPV6 0x0004
+#define RRS_IS_RSS_IPV6_TCP 0x0008
+#define RRS_IS_IPV6 0x0010
+#define RRS_IS_IP_FRAG 0x0020
+#define RRS_IS_IP_DF 0x0040
+#define RRS_IS_802_3 0x0080
+#define RRS_IS_VLAN_TAG 0x0100
+#define RRS_IS_ERR_FRAME 0x0200
+#define RRS_IS_IPV4 0x0400
+#define RRS_IS_UDP 0x0800
+#define RRS_IS_TCP 0x1000
+#define RRS_IS_BCAST 0x2000
+#define RRS_IS_MCAST 0x4000
+#define RRS_IS_PAUSE 0x8000
+
+#define RRS_ERR_BAD_CRC 0x0001
+#define RRS_ERR_CODE 0x0002
+#define RRS_ERR_DRIBBLE 0x0004
+#define RRS_ERR_RUNT 0x0008
+#define RRS_ERR_RX_OVERFLOW 0x0010
+#define RRS_ERR_TRUNC 0x0020
+#define RRS_ERR_IP_CSUM 0x0040
+#define RRS_ERR_L4_CSUM 0x0080
+#define RRS_ERR_LENGTH 0x0100
+#define RRS_ERR_DES_ADDR 0x0200
+
+struct atl1e_recv_ret_status {
+ u16 seq_num;
+ u16 hash_lo;
+ __le32 word1;
+ u16 pkt_flag;
+ u16 err_flag;
+ u16 hash_hi;
+ u16 vtag;
+};
+
+enum atl1e_dma_req_block {
+ atl1e_dma_req_128 = 0,
+ atl1e_dma_req_256 = 1,
+ atl1e_dma_req_512 = 2,
+ atl1e_dma_req_1024 = 3,
+ atl1e_dma_req_2048 = 4,
+ atl1e_dma_req_4096 = 5
+};
+
+enum atl1e_rrs_type {
+ atl1e_rrs_disable = 0,
+ atl1e_rrs_ipv4 = 1,
+ atl1e_rrs_ipv4_tcp = 2,
+ atl1e_rrs_ipv6 = 4,
+ atl1e_rrs_ipv6_tcp = 8
+};
+
+enum atl1e_nic_type {
+ athr_l1e = 0,
+ athr_l2e_revA = 1,
+ athr_l2e_revB = 2
+};
+
+struct atl1e_hw_stats {
+ /* rx */
+ unsigned long rx_ok; /* The number of good packet received. */
+ unsigned long rx_bcast; /* The number of good broadcast packet received. */
+ unsigned long rx_mcast; /* The number of good multicast packet received. */
+ unsigned long rx_pause; /* The number of Pause packet received. */
+ unsigned long rx_ctrl; /* The number of Control packet received other than Pause frame. */
+ unsigned long rx_fcs_err; /* The number of packets with bad FCS. */
+ unsigned long rx_len_err; /* The number of packets with mismatch of length field and actual size. */
+ unsigned long rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */
+ unsigned long rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */
+ unsigned long rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */
+ unsigned long rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */
+ unsigned long rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */
+ unsigned long rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */
+ unsigned long rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */
+ unsigned long rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */
+ unsigned long rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */
+ unsigned long rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */
+ unsigned long rx_sz_ov; /* The number of good and bad packets received that are more than MTU size truncated by Selene. */
+ unsigned long rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */
+ unsigned long rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */
+ unsigned long rx_align_err; /* Alignment Error */
+ unsigned long rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */
+ unsigned long rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */
+ unsigned long rx_err_addr; /* The number of packets dropped due to address filtering. */
+
+ /* tx */
+ unsigned long tx_ok; /* The number of good packet transmitted. */
+ unsigned long tx_bcast; /* The number of good broadcast packet transmitted. */
+ unsigned long tx_mcast; /* The number of good multicast packet transmitted. */
+ unsigned long tx_pause; /* The number of Pause packet transmitted. */
+ unsigned long tx_exc_defer; /* The number of packets transmitted with excessive deferral. */
+ unsigned long tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */
+ unsigned long tx_defer; /* The number of packets transmitted that is deferred. */
+ unsigned long tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */
+ unsigned long tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */
+ unsigned long tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */
+ unsigned long tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */
+ unsigned long tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */
+ unsigned long tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */
+ unsigned long tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */
+ unsigned long tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */
+ unsigned long tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */
+ unsigned long tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */
+ unsigned long tx_late_col; /* The number of packets transmitted with late collisions. */
+ unsigned long tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */
+ unsigned long tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
+ unsigned long tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */
+ unsigned long tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */
+ unsigned long tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */
+ unsigned long tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */
+ unsigned long tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */
+};
+
+struct atl1e_hw {
+ u8 __iomem *hw_addr; /* inner register address */
+ resource_size_t mem_rang;
+ struct atl1e_adapter *adapter;
+ enum atl1e_nic_type nic_type;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+ u16 pci_cmd_word;
+ u8 mac_addr[ETH_ALEN];
+ u8 perm_mac_addr[ETH_ALEN];
+ u8 preamble_len;
+ u16 max_frame_size;
+ u16 rx_jumbo_th;
+ u16 tx_jumbo_th;
+
+ u16 media_type;
+#define MEDIA_TYPE_AUTO_SENSOR 0
+#define MEDIA_TYPE_100M_FULL 1
+#define MEDIA_TYPE_100M_HALF 2
+#define MEDIA_TYPE_10M_FULL 3
+#define MEDIA_TYPE_10M_HALF 4
+
+ u16 autoneg_advertised;
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL 0x0020
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
+
+ u16 imt; /* Interrupt Moderator timer ( 2us resolution) */
+ u16 ict; /* Interrupt Clear timer (2us resolution) */
+ u32 smb_timer;
+ u16 rrd_thresh; /* Threshold of number of RRD produced to trigger
+ interrupt request */
+ u16 tpd_thresh;
+ u16 rx_count_down; /* 2us resolution */
+ u16 tx_count_down;
+
+ u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned burst. */
+ enum atl1e_rrs_type rrs_type;
+ u32 base_cpu;
+ u32 indirect_tab;
+
+ enum atl1e_dma_req_block dmar_block;
+ enum atl1e_dma_req_block dmaw_block;
+ u8 dmaw_dly_cnt;
+ u8 dmar_dly_cnt;
+
+ bool phy_configured;
+ bool re_autoneg;
+ bool emi_ca;
+};
+
+/*
+ * wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct atl1e_tx_buffer {
+ struct sk_buff *skb;
+ u16 flags;
+#define ATL1E_TX_PCIMAP_SINGLE 0x0001
+#define ATL1E_TX_PCIMAP_PAGE 0x0002
+#define ATL1E_TX_PCIMAP_TYPE_MASK 0x0003
+ u16 length;
+ dma_addr_t dma;
+};
+
+#define ATL1E_SET_PCIMAP_TYPE(tx_buff, type) do { \
+ ((tx_buff)->flags) &= ~ATL1E_TX_PCIMAP_TYPE_MASK; \
+ ((tx_buff)->flags) |= (type); \
+ } while (0)
+
+struct atl1e_rx_page {
+ dma_addr_t dma; /* receive rage DMA address */
+ u8 *addr; /* receive rage virtual address */
+ dma_addr_t write_offset_dma; /* the DMA address which contain the
+ receive data offset in the page */
+ u32 *write_offset_addr; /* the virtaul address which contain
+ the receive data offset in the page */
+ u32 read_offset; /* the offset where we have read */
+};
+
+struct atl1e_rx_page_desc {
+ struct atl1e_rx_page rx_page[AT_PAGE_NUM_PER_QUEUE];
+ u8 rx_using;
+ u16 rx_nxseq;
+};
+
+/* transmit packet descriptor (tpd) ring */
+struct atl1e_tx_ring {
+ struct atl1e_tpd_desc *desc; /* descriptor ring virtual address */
+ dma_addr_t dma; /* descriptor ring physical address */
+ u16 count; /* the count of transmit rings */
+ rwlock_t tx_lock;
+ u16 next_to_use;
+ atomic_t next_to_clean;
+ struct atl1e_tx_buffer *tx_buffer;
+ dma_addr_t cmb_dma;
+ u32 *cmb;
+};
+
+/* receive packet descriptor ring */
+struct atl1e_rx_ring {
+ void *desc;
+ dma_addr_t dma;
+ int size;
+ u32 page_size; /* bytes length of rxf page */
+ u32 real_page_size; /* real_page_size = page_size + jumbo + aliagn */
+ struct atl1e_rx_page_desc rx_page_desc[AT_MAX_RECEIVE_QUEUE];
+};
+
+/* board specific private data structure */
+struct atl1e_adapter {
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct napi_struct napi;
+ struct mii_if_info mii; /* MII interface info */
+ struct atl1e_hw hw;
+ struct atl1e_hw_stats hw_stats;
+
+ u32 wol;
+ u16 link_speed;
+ u16 link_duplex;
+
+ spinlock_t mdio_lock;
+ atomic_t irq_sem;
+
+ struct work_struct reset_task;
+ struct work_struct link_chg_task;
+ struct timer_list watchdog_timer;
+ struct timer_list phy_config_timer;
+
+ /* All Descriptor memory */
+ dma_addr_t ring_dma;
+ void *ring_vir_addr;
+ u32 ring_size;
+
+ struct atl1e_tx_ring tx_ring;
+ struct atl1e_rx_ring rx_ring;
+ int num_rx_queues;
+ unsigned long flags;
+#define __AT_TESTING 0x0001
+#define __AT_RESETTING 0x0002
+#define __AT_DOWN 0x0003
+
+ u32 bd_number; /* board number;*/
+ u32 pci_state[16];
+ u32 *config_space;
+};
+
+#define AT_WRITE_REG(a, reg, value) ( \
+ writel((value), ((a)->hw_addr + reg)))
+
+#define AT_WRITE_FLUSH(a) (\
+ readl((a)->hw_addr))
+
+#define AT_READ_REG(a, reg) ( \
+ readl((a)->hw_addr + reg))
+
+#define AT_WRITE_REGB(a, reg, value) (\
+ writeb((value), ((a)->hw_addr + reg)))
+
+#define AT_READ_REGB(a, reg) (\
+ readb((a)->hw_addr + reg))
+
+#define AT_WRITE_REGW(a, reg, value) (\
+ writew((value), ((a)->hw_addr + reg)))
+
+#define AT_READ_REGW(a, reg) (\
+ readw((a)->hw_addr + reg))
+
+#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ writel((value), (((a)->hw_addr + reg) + ((offset) << 2))))
+
+#define AT_READ_REG_ARRAY(a, reg, offset) ( \
+ readl(((a)->hw_addr + reg) + ((offset) << 2)))
+
+extern char atl1e_driver_name[];
+
+void atl1e_check_options(struct atl1e_adapter *adapter);
+int atl1e_up(struct atl1e_adapter *adapter);
+void atl1e_down(struct atl1e_adapter *adapter);
+void atl1e_reinit_locked(struct atl1e_adapter *adapter);
+s32 atl1e_reset_hw(struct atl1e_hw *hw);
+void atl1e_set_ethtool_ops(struct net_device *netdev);
+#endif /* _ATL1_E_H_ */
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c b/drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c
new file mode 100644
index 0000000000..68f1832a19
--- /dev/null
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/slab.h>
+
+#include "atl1e.h"
+
+static int atl1e_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ struct atl1e_hw *hw = &adapter->hw;
+ u32 supported, advertising;
+
+ supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
+ if (hw->nic_type == athr_l1e)
+ supported |= SUPPORTED_1000baseT_Full;
+
+ advertising = ADVERTISED_TP;
+
+ advertising |= ADVERTISED_Autoneg;
+ advertising |= hw->autoneg_advertised;
+
+ cmd->base.port = PORT_TP;
+ cmd->base.phy_address = 0;
+
+ if (adapter->link_speed != SPEED_0) {
+ cmd->base.speed = adapter->link_speed;
+ if (adapter->link_duplex == FULL_DUPLEX)
+ cmd->base.duplex = DUPLEX_FULL;
+ else
+ cmd->base.duplex = DUPLEX_HALF;
+ } else {
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
+ }
+
+ cmd->base.autoneg = AUTONEG_ENABLE;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+
+ return 0;
+}
+
+static int atl1e_set_link_ksettings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ struct atl1e_hw *hw = &adapter->hw;
+ u32 advertising;
+
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ cmd->link_modes.advertising);
+
+ while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (cmd->base.autoneg == AUTONEG_ENABLE) {
+ u16 adv4, adv9;
+
+ if (advertising & ADVERTISE_1000_FULL) {
+ if (hw->nic_type == athr_l1e) {
+ hw->autoneg_advertised =
+ advertising & AT_ADV_MASK;
+ } else {
+ clear_bit(__AT_RESETTING, &adapter->flags);
+ return -EINVAL;
+ }
+ } else if (advertising & ADVERTISE_1000_HALF) {
+ clear_bit(__AT_RESETTING, &adapter->flags);
+ return -EINVAL;
+ } else {
+ hw->autoneg_advertised =
+ advertising & AT_ADV_MASK;
+ }
+ advertising = hw->autoneg_advertised |
+ ADVERTISED_TP | ADVERTISED_Autoneg;
+
+ adv4 = hw->mii_autoneg_adv_reg & ~ADVERTISE_ALL;
+ adv9 = hw->mii_1000t_ctrl_reg & ~MII_AT001_CR_1000T_SPEED_MASK;
+ if (hw->autoneg_advertised & ADVERTISE_10_HALF)
+ adv4 |= ADVERTISE_10HALF;
+ if (hw->autoneg_advertised & ADVERTISE_10_FULL)
+ adv4 |= ADVERTISE_10FULL;
+ if (hw->autoneg_advertised & ADVERTISE_100_HALF)
+ adv4 |= ADVERTISE_100HALF;
+ if (hw->autoneg_advertised & ADVERTISE_100_FULL)
+ adv4 |= ADVERTISE_100FULL;
+ if (hw->autoneg_advertised & ADVERTISE_1000_FULL)
+ adv9 |= ADVERTISE_1000FULL;
+
+ if (adv4 != hw->mii_autoneg_adv_reg ||
+ adv9 != hw->mii_1000t_ctrl_reg) {
+ hw->mii_autoneg_adv_reg = adv4;
+ hw->mii_1000t_ctrl_reg = adv9;
+ hw->re_autoneg = true;
+ }
+
+ } else {
+ clear_bit(__AT_RESETTING, &adapter->flags);
+ return -EINVAL;
+ }
+
+ /* reset the link */
+
+ if (netif_running(adapter->netdev)) {
+ atl1e_down(adapter);
+ atl1e_up(adapter);
+ } else
+ atl1e_reset_hw(&adapter->hw);
+
+ clear_bit(__AT_RESETTING, &adapter->flags);
+ return 0;
+}
+
+static u32 atl1e_get_msglevel(struct net_device *netdev)
+{
+#ifdef DBG
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+static int atl1e_get_regs_len(struct net_device *netdev)
+{
+ return AT_REGS_LEN * sizeof(u32);
+}
+
+static void atl1e_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ struct atl1e_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u16 phy_data;
+
+ memset(p, 0, AT_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+ regs_buff[0] = AT_READ_REG(hw, REG_VPD_CAP);
+ regs_buff[1] = AT_READ_REG(hw, REG_SPI_FLASH_CTRL);
+ regs_buff[2] = AT_READ_REG(hw, REG_SPI_FLASH_CONFIG);
+ regs_buff[3] = AT_READ_REG(hw, REG_TWSI_CTRL);
+ regs_buff[4] = AT_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL);
+ regs_buff[5] = AT_READ_REG(hw, REG_MASTER_CTRL);
+ regs_buff[6] = AT_READ_REG(hw, REG_MANUAL_TIMER_INIT);
+ regs_buff[7] = AT_READ_REG(hw, REG_IRQ_MODU_TIMER_INIT);
+ regs_buff[8] = AT_READ_REG(hw, REG_GPHY_CTRL);
+ regs_buff[9] = AT_READ_REG(hw, REG_CMBDISDMA_TIMER);
+ regs_buff[10] = AT_READ_REG(hw, REG_IDLE_STATUS);
+ regs_buff[11] = AT_READ_REG(hw, REG_MDIO_CTRL);
+ regs_buff[12] = AT_READ_REG(hw, REG_SERDES_LOCK);
+ regs_buff[13] = AT_READ_REG(hw, REG_MAC_CTRL);
+ regs_buff[14] = AT_READ_REG(hw, REG_MAC_IPG_IFG);
+ regs_buff[15] = AT_READ_REG(hw, REG_MAC_STA_ADDR);
+ regs_buff[16] = AT_READ_REG(hw, REG_MAC_STA_ADDR+4);
+ regs_buff[17] = AT_READ_REG(hw, REG_RX_HASH_TABLE);
+ regs_buff[18] = AT_READ_REG(hw, REG_RX_HASH_TABLE+4);
+ regs_buff[19] = AT_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL);
+ regs_buff[20] = AT_READ_REG(hw, REG_MTU);
+ regs_buff[21] = AT_READ_REG(hw, REG_WOL_CTRL);
+ regs_buff[22] = AT_READ_REG(hw, REG_SRAM_TRD_ADDR);
+ regs_buff[23] = AT_READ_REG(hw, REG_SRAM_TRD_LEN);
+ regs_buff[24] = AT_READ_REG(hw, REG_SRAM_RXF_ADDR);
+ regs_buff[25] = AT_READ_REG(hw, REG_SRAM_RXF_LEN);
+ regs_buff[26] = AT_READ_REG(hw, REG_SRAM_TXF_ADDR);
+ regs_buff[27] = AT_READ_REG(hw, REG_SRAM_TXF_LEN);
+ regs_buff[28] = AT_READ_REG(hw, REG_SRAM_TCPH_ADDR);
+ regs_buff[29] = AT_READ_REG(hw, REG_SRAM_PKTH_ADDR);
+
+ atl1e_read_phy_reg(hw, MII_BMCR, &phy_data);
+ regs_buff[73] = (u32)phy_data;
+ atl1e_read_phy_reg(hw, MII_BMSR, &phy_data);
+ regs_buff[74] = (u32)phy_data;
+}
+
+static int atl1e_get_eeprom_len(struct net_device *netdev)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ if (!atl1e_check_eeprom_exist(&adapter->hw))
+ return AT_EEPROM_LEN;
+ else
+ return 0;
+}
+
+static int atl1e_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ struct atl1e_hw *hw = &adapter->hw;
+ u32 *eeprom_buff;
+ int first_dword, last_dword;
+ int ret_val = 0;
+ int i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ if (atl1e_check_eeprom_exist(hw)) /* not exist */
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_dword = eeprom->offset >> 2;
+ last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
+
+ eeprom_buff = kmalloc_array(last_dword - first_dword + 1, sizeof(u32),
+ GFP_KERNEL);
+ if (eeprom_buff == NULL)
+ return -ENOMEM;
+
+ for (i = first_dword; i < last_dword; i++) {
+ if (!atl1e_read_eeprom(hw, i * 4, &(eeprom_buff[i-first_dword]))) {
+ kfree(eeprom_buff);
+ return -EIO;
+ }
+ }
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3),
+ eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int atl1e_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ struct atl1e_hw *hw = &adapter->hw;
+ u32 *eeprom_buff;
+ u32 *ptr;
+ int first_dword, last_dword;
+ int ret_val = 0;
+ int i;
+
+ if (eeprom->len == 0)
+ return -EOPNOTSUPP;
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EINVAL;
+
+ first_dword = eeprom->offset >> 2;
+ last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
+ eeprom_buff = kmalloc(AT_EEPROM_LEN, GFP_KERNEL);
+ if (eeprom_buff == NULL)
+ return -ENOMEM;
+
+ ptr = eeprom_buff;
+
+ if (eeprom->offset & 3) {
+ /* need read/modify/write of first changed EEPROM word */
+ /* only the second byte of the word is being modified */
+ if (!atl1e_read_eeprom(hw, first_dword * 4, &(eeprom_buff[0]))) {
+ ret_val = -EIO;
+ goto out;
+ }
+ ptr++;
+ }
+ if (((eeprom->offset + eeprom->len) & 3)) {
+ /* need read/modify/write of last changed EEPROM word */
+ /* only the first byte of the word is being modified */
+
+ if (!atl1e_read_eeprom(hw, last_dword * 4,
+ &(eeprom_buff[last_dword - first_dword]))) {
+ ret_val = -EIO;
+ goto out;
+ }
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ memcpy(ptr, bytes, eeprom->len);
+
+ for (i = 0; i < last_dword - first_dword + 1; i++) {
+ if (!atl1e_write_eeprom(hw, ((first_dword + i) * 4),
+ eeprom_buff[i])) {
+ ret_val = -EIO;
+ goto out;
+ }
+ }
+out:
+ kfree(eeprom_buff);
+ return ret_val;
+}
+
+static void atl1e_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ strscpy(drvinfo->driver, atl1e_driver_name, sizeof(drvinfo->driver));
+ strscpy(drvinfo->fw_version, "L1e", sizeof(drvinfo->fw_version));
+ strscpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ sizeof(drvinfo->bus_info));
+}
+
+static void atl1e_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ wol->supported = WAKE_MAGIC | WAKE_PHY;
+ wol->wolopts = 0;
+
+ if (adapter->wol & AT_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & AT_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & AT_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & AT_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+ if (adapter->wol & AT_WUFC_LNKC)
+ wol->wolopts |= WAKE_PHY;
+}
+
+static int atl1e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
+ WAKE_UCAST | WAKE_MCAST | WAKE_BCAST))
+ return -EOPNOTSUPP;
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= AT_WUFC_MAG;
+ if (wol->wolopts & WAKE_PHY)
+ adapter->wol |= AT_WUFC_LNKC;
+
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+static int atl1e_nway_reset(struct net_device *netdev)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ if (netif_running(netdev))
+ atl1e_reinit_locked(adapter);
+ return 0;
+}
+
+static const struct ethtool_ops atl1e_ethtool_ops = {
+ .get_drvinfo = atl1e_get_drvinfo,
+ .get_regs_len = atl1e_get_regs_len,
+ .get_regs = atl1e_get_regs,
+ .get_wol = atl1e_get_wol,
+ .set_wol = atl1e_set_wol,
+ .get_msglevel = atl1e_get_msglevel,
+ .nway_reset = atl1e_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = atl1e_get_eeprom_len,
+ .get_eeprom = atl1e_get_eeprom,
+ .set_eeprom = atl1e_set_eeprom,
+ .get_link_ksettings = atl1e_get_link_ksettings,
+ .set_link_ksettings = atl1e_set_link_ksettings,
+};
+
+void atl1e_set_ethtool_ops(struct net_device *netdev)
+{
+ netdev->ethtool_ops = &atl1e_ethtool_ops;
+}
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c
new file mode 100644
index 0000000000..fa89bc27f6
--- /dev/null
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ */
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+
+#include "atl1e.h"
+
+/*
+ * check_eeprom_exist
+ * return 0 if eeprom exist
+ */
+int atl1e_check_eeprom_exist(struct atl1e_hw *hw)
+{
+ u32 value;
+
+ value = AT_READ_REG(hw, REG_SPI_FLASH_CTRL);
+ if (value & SPI_FLASH_CTRL_EN_VPD) {
+ value &= ~SPI_FLASH_CTRL_EN_VPD;
+ AT_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
+ }
+ value = AT_READ_REGW(hw, REG_PCIE_CAP_LIST);
+ return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
+}
+
+void atl1e_hw_set_mac_addr(struct atl1e_hw *hw)
+{
+ u32 value;
+ /*
+ * 00-0B-6A-F6-00-DC
+ * 0: 6AF600DC 1: 000B
+ * low dword
+ */
+ value = (((u32)hw->mac_addr[2]) << 24) |
+ (((u32)hw->mac_addr[3]) << 16) |
+ (((u32)hw->mac_addr[4]) << 8) |
+ (((u32)hw->mac_addr[5])) ;
+ AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
+ /* hight dword */
+ value = (((u32)hw->mac_addr[0]) << 8) |
+ (((u32)hw->mac_addr[1])) ;
+ AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
+}
+
+/*
+ * atl1e_get_permanent_address
+ * return 0 if get valid mac address,
+ */
+static int atl1e_get_permanent_address(struct atl1e_hw *hw)
+{
+ u32 addr[2];
+ u32 i;
+ u32 twsi_ctrl_data;
+ u8 eth_addr[ETH_ALEN];
+
+ if (is_valid_ether_addr(hw->perm_mac_addr))
+ return 0;
+
+ /* init */
+ addr[0] = addr[1] = 0;
+
+ if (!atl1e_check_eeprom_exist(hw)) {
+ /* eeprom exist */
+ twsi_ctrl_data = AT_READ_REG(hw, REG_TWSI_CTRL);
+ twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART;
+ AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data);
+ for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) {
+ msleep(10);
+ twsi_ctrl_data = AT_READ_REG(hw, REG_TWSI_CTRL);
+ if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0)
+ break;
+ }
+ if (i >= AT_TWSI_EEPROM_TIMEOUT)
+ return AT_ERR_TIMEOUT;
+ }
+
+ /* maybe MAC-address is from BIOS */
+ addr[0] = AT_READ_REG(hw, REG_MAC_STA_ADDR);
+ addr[1] = AT_READ_REG(hw, REG_MAC_STA_ADDR + 4);
+ *(u32 *) &eth_addr[2] = swab32(addr[0]);
+ *(u16 *) &eth_addr[0] = swab16(*(u16 *)&addr[1]);
+
+ if (is_valid_ether_addr(eth_addr)) {
+ memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+ return 0;
+ }
+
+ return AT_ERR_EEPROM;
+}
+
+bool atl1e_write_eeprom(struct atl1e_hw *hw, u32 offset, u32 value)
+{
+ return true;
+}
+
+bool atl1e_read_eeprom(struct atl1e_hw *hw, u32 offset, u32 *p_value)
+{
+ int i;
+ u32 control;
+
+ if (offset & 3)
+ return false; /* address do not align */
+
+ AT_WRITE_REG(hw, REG_VPD_DATA, 0);
+ control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
+ AT_WRITE_REG(hw, REG_VPD_CAP, control);
+
+ for (i = 0; i < 10; i++) {
+ msleep(2);
+ control = AT_READ_REG(hw, REG_VPD_CAP);
+ if (control & VPD_CAP_VPD_FLAG)
+ break;
+ }
+ if (control & VPD_CAP_VPD_FLAG) {
+ *p_value = AT_READ_REG(hw, REG_VPD_DATA);
+ return true;
+ }
+ return false; /* timeout */
+}
+
+void atl1e_force_ps(struct atl1e_hw *hw)
+{
+ AT_WRITE_REGW(hw, REG_GPHY_CTRL,
+ GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET);
+}
+
+/*
+ * Reads the adapter's MAC address from the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ */
+int atl1e_read_mac_addr(struct atl1e_hw *hw)
+{
+ int err = 0;
+
+ err = atl1e_get_permanent_address(hw);
+ if (err)
+ return AT_ERR_EEPROM;
+ memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr));
+ return 0;
+}
+
+/*
+ * atl1e_hash_mc_addr
+ * purpose
+ * set hash value for a multicast address
+ */
+u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr)
+{
+ u32 crc32;
+ u32 value = 0;
+ int i;
+
+ crc32 = ether_crc_le(6, mc_addr);
+ for (i = 0; i < 32; i++)
+ value |= (((crc32 >> i) & 1) << (31 - i));
+
+ return value;
+}
+
+/*
+ * Sets the bit in the multicast table corresponding to the hash value.
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ */
+void atl1e_hash_set(struct atl1e_hw *hw, u32 hash_value)
+{
+ u32 hash_bit, hash_reg;
+ u32 mta;
+
+ /*
+ * The HASH Table is a register array of 2 32-bit registers.
+ * It is treated like an array of 64 bits. We want to set
+ * bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The register is determined by the
+ * upper 7 bits of the hash value and the bit within that
+ * register are determined by the lower 5 bits of the value.
+ */
+ hash_reg = (hash_value >> 31) & 0x1;
+ hash_bit = (hash_value >> 26) & 0x1F;
+
+ mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg);
+
+ mta |= (1 << hash_bit);
+
+ AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta);
+}
+/*
+ * Reads the value from a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to read
+ */
+int atl1e_read_phy_reg(struct atl1e_hw *hw, u16 reg_addr, u16 *phy_data)
+{
+ u32 val;
+ int i;
+
+ val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
+ MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW |
+ MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+
+ AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+
+ wmb();
+
+ for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+ udelay(2);
+ val = AT_READ_REG(hw, REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ wmb();
+ }
+ if (!(val & (MDIO_START | MDIO_BUSY))) {
+ *phy_data = (u16)val;
+ return 0;
+ }
+
+ return AT_ERR_PHY;
+}
+
+/*
+ * Writes a value to a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to write
+ * data - data to write to the PHY
+ */
+int atl1e_write_phy_reg(struct atl1e_hw *hw, u32 reg_addr, u16 phy_data)
+{
+ int i;
+ u32 val;
+
+ val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
+ (reg_addr&MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
+ MDIO_SUP_PREAMBLE |
+ MDIO_START |
+ MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+
+ AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+ wmb();
+
+ for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+ udelay(2);
+ val = AT_READ_REG(hw, REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ wmb();
+ }
+
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ return 0;
+
+ return AT_ERR_PHY;
+}
+
+/*
+ * atl1e_init_pcie - init PCIE module
+ */
+static void atl1e_init_pcie(struct atl1e_hw *hw)
+{
+ u32 value;
+ /* comment 2lines below to save more power when sususpend
+ value = LTSSM_TEST_MODE_DEF;
+ AT_WRITE_REG(hw, REG_LTSSM_TEST_MODE, value);
+ */
+
+ /* pcie flow control mode change */
+ value = AT_READ_REG(hw, 0x1008);
+ value |= 0x8000;
+ AT_WRITE_REG(hw, 0x1008, value);
+}
+/*
+ * Configures PHY autoneg and flow control advertisement settings
+ *
+ * hw - Struct containing variables accessed by shared code
+ */
+static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
+
+ if (0 != hw->mii_autoneg_adv_reg)
+ return 0;
+ /* Read the MII Auto-Neg Advertisement Register (Address 4/9). */
+ mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
+ mii_1000t_ctrl_reg = MII_AT001_CR_1000T_DEFAULT_CAP_MASK;
+
+ /*
+ * Need to parse autoneg_advertised and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /*
+ * First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~ADVERTISE_ALL;
+ mii_1000t_ctrl_reg &= ~MII_AT001_CR_1000T_SPEED_MASK;
+
+ /*
+ * Need to parse MediaType and setup the
+ * appropriate PHY registers.
+ */
+ switch (hw->media_type) {
+ case MEDIA_TYPE_AUTO_SENSOR:
+ mii_autoneg_adv_reg |= ADVERTISE_ALL;
+ hw->autoneg_advertised = ADVERTISE_ALL;
+ if (hw->nic_type == athr_l1e) {
+ mii_1000t_ctrl_reg |= ADVERTISE_1000FULL;
+ hw->autoneg_advertised |= ADVERTISE_1000_FULL;
+ }
+ break;
+
+ case MEDIA_TYPE_100M_FULL:
+ mii_autoneg_adv_reg |= ADVERTISE_100FULL;
+ hw->autoneg_advertised = ADVERTISE_100_FULL;
+ break;
+
+ case MEDIA_TYPE_100M_HALF:
+ mii_autoneg_adv_reg |= ADVERTISE_100_HALF;
+ hw->autoneg_advertised = ADVERTISE_100_HALF;
+ break;
+
+ case MEDIA_TYPE_10M_FULL:
+ mii_autoneg_adv_reg |= ADVERTISE_10_FULL;
+ hw->autoneg_advertised = ADVERTISE_10_FULL;
+ break;
+
+ default:
+ mii_autoneg_adv_reg |= ADVERTISE_10_HALF;
+ hw->autoneg_advertised = ADVERTISE_10_HALF;
+ break;
+ }
+
+ /* flow control fixed to enable all */
+ mii_autoneg_adv_reg |= (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
+
+ hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
+ hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
+
+ ret_val = atl1e_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) {
+ ret_val = atl1e_write_phy_reg(hw, MII_CTRL1000,
+ mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return 0;
+}
+
+
+/*
+ * Resets the PHY and make all config validate
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sets bit 15 and 12 of the MII control regiser (for F001 bug)
+ */
+int atl1e_phy_commit(struct atl1e_hw *hw)
+{
+ struct atl1e_adapter *adapter = hw->adapter;
+ int ret_val;
+ u16 phy_data;
+
+ phy_data = BMCR_RESET | BMCR_ANENABLE | BMCR_ANRESTART;
+
+ ret_val = atl1e_write_phy_reg(hw, MII_BMCR, phy_data);
+ if (ret_val) {
+ u32 val;
+ int i;
+ /**************************************
+ * pcie serdes link may be down !
+ **************************************/
+ for (i = 0; i < 25; i++) {
+ msleep(1);
+ val = AT_READ_REG(hw, REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ }
+
+ if (0 != (val & (MDIO_START | MDIO_BUSY))) {
+ netdev_err(adapter->netdev,
+ "pcie linkdown at least for 25ms\n");
+ return ret_val;
+ }
+
+ netdev_err(adapter->netdev, "pcie linkup after %d ms\n", i);
+ }
+ return 0;
+}
+
+int atl1e_phy_init(struct atl1e_hw *hw)
+{
+ struct atl1e_adapter *adapter = hw->adapter;
+ s32 ret_val;
+ u16 phy_val;
+
+ if (hw->phy_configured) {
+ if (hw->re_autoneg) {
+ hw->re_autoneg = false;
+ return atl1e_restart_autoneg(hw);
+ }
+ return 0;
+ }
+
+ /* RESET GPHY Core */
+ AT_WRITE_REGW(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT);
+ msleep(2);
+ AT_WRITE_REGW(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT |
+ GPHY_CTRL_EXT_RESET);
+ msleep(2);
+
+ /* patches */
+ /* p1. eable hibernation mode */
+ ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0xB);
+ if (ret_val)
+ return ret_val;
+ ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0xBC00);
+ if (ret_val)
+ return ret_val;
+ /* p2. set Class A/B for all modes */
+ ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0);
+ if (ret_val)
+ return ret_val;
+ phy_val = 0x02ef;
+ /* remove Class AB */
+ /* phy_val = hw->emi_ca ? 0x02ef : 0x02df; */
+ ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, phy_val);
+ if (ret_val)
+ return ret_val;
+ /* p3. 10B ??? */
+ ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x12);
+ if (ret_val)
+ return ret_val;
+ ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x4C04);
+ if (ret_val)
+ return ret_val;
+ /* p4. 1000T power */
+ ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x4);
+ if (ret_val)
+ return ret_val;
+ ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x8BBB);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x5);
+ if (ret_val)
+ return ret_val;
+ ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x2C46);
+ if (ret_val)
+ return ret_val;
+
+ msleep(1);
+
+ /*Enable PHY LinkChange Interrupt */
+ ret_val = atl1e_write_phy_reg(hw, MII_INT_CTRL, 0xC00);
+ if (ret_val) {
+ netdev_err(adapter->netdev,
+ "Error enable PHY linkChange Interrupt\n");
+ return ret_val;
+ }
+ /* setup AutoNeg parameters */
+ ret_val = atl1e_phy_setup_autoneg_adv(hw);
+ if (ret_val) {
+ netdev_err(adapter->netdev,
+ "Error Setting up Auto-Negotiation\n");
+ return ret_val;
+ }
+ /* SW.Reset & En-Auto-Neg to restart Auto-Neg*/
+ netdev_dbg(adapter->netdev, "Restarting Auto-Negotiation\n");
+ ret_val = atl1e_phy_commit(hw);
+ if (ret_val) {
+ netdev_err(adapter->netdev, "Error resetting the phy\n");
+ return ret_val;
+ }
+
+ hw->phy_configured = true;
+
+ return 0;
+}
+
+/*
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ * hw - Struct containing variables accessed by shared code
+ * return : 0 or idle status (if error)
+ */
+int atl1e_reset_hw(struct atl1e_hw *hw)
+{
+ struct atl1e_adapter *adapter = hw->adapter;
+ struct pci_dev *pdev = adapter->pdev;
+
+ u32 idle_status_data = 0;
+ u16 pci_cfg_cmd_word = 0;
+ int timeout = 0;
+
+ /* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */
+ pci_read_config_word(pdev, PCI_REG_COMMAND, &pci_cfg_cmd_word);
+ if ((pci_cfg_cmd_word & (CMD_IO_SPACE |
+ CMD_MEMORY_SPACE | CMD_BUS_MASTER))
+ != (CMD_IO_SPACE | CMD_MEMORY_SPACE | CMD_BUS_MASTER)) {
+ pci_cfg_cmd_word |= (CMD_IO_SPACE |
+ CMD_MEMORY_SPACE | CMD_BUS_MASTER);
+ pci_write_config_word(pdev, PCI_REG_COMMAND, pci_cfg_cmd_word);
+ }
+
+ /*
+ * Issue Soft Reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ AT_WRITE_REG(hw, REG_MASTER_CTRL,
+ MASTER_CTRL_LED_MODE | MASTER_CTRL_SOFT_RST);
+ wmb();
+ msleep(1);
+
+ /* Wait at least 10ms for All module to be Idle */
+ for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+ idle_status_data = AT_READ_REG(hw, REG_IDLE_STATUS);
+ if (idle_status_data == 0)
+ break;
+ msleep(1);
+ cpu_relax();
+ }
+
+ if (timeout >= AT_HW_MAX_IDLE_DELAY) {
+ netdev_err(adapter->netdev,
+ "MAC state machine can't be idle since disabled for 10ms second\n");
+ return AT_ERR_TIMEOUT;
+ }
+
+ return 0;
+}
+
+
+/*
+ * Performs basic configuration of the adapter.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes multicast table,
+ * and Calls routines to setup link
+ * Leaves the transmit and receive units disabled and uninitialized.
+ */
+int atl1e_init_hw(struct atl1e_hw *hw)
+{
+ s32 ret_val = 0;
+
+ atl1e_init_pcie(hw);
+
+ /* Zero out the Multicast HASH table */
+ /* clear the old settings from the multicast hash table */
+ AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
+ AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
+
+ ret_val = atl1e_phy_init(hw);
+
+ return ret_val;
+}
+
+/*
+ * Detects the current speed and duplex settings of the hardware.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * speed - Speed of the connection
+ * duplex - Duplex setting of the connection
+ */
+int atl1e_get_speed_and_duplex(struct atl1e_hw *hw, u16 *speed, u16 *duplex)
+{
+ int err;
+ u16 phy_data;
+
+ /* Read PHY Specific Status Register (17) */
+ err = atl1e_read_phy_reg(hw, MII_AT001_PSSR, &phy_data);
+ if (err)
+ return err;
+
+ if (!(phy_data & MII_AT001_PSSR_SPD_DPLX_RESOLVED))
+ return AT_ERR_PHY_RES;
+
+ switch (phy_data & MII_AT001_PSSR_SPEED) {
+ case MII_AT001_PSSR_1000MBS:
+ *speed = SPEED_1000;
+ break;
+ case MII_AT001_PSSR_100MBS:
+ *speed = SPEED_100;
+ break;
+ case MII_AT001_PSSR_10MBS:
+ *speed = SPEED_10;
+ break;
+ default:
+ return AT_ERR_PHY_SPEED;
+ }
+
+ if (phy_data & MII_AT001_PSSR_DPLX)
+ *duplex = FULL_DUPLEX;
+ else
+ *duplex = HALF_DUPLEX;
+
+ return 0;
+}
+
+int atl1e_restart_autoneg(struct atl1e_hw *hw)
+{
+ int err = 0;
+
+ err = atl1e_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
+ if (err)
+ return err;
+
+ if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) {
+ err = atl1e_write_phy_reg(hw, MII_CTRL1000,
+ hw->mii_1000t_ctrl_reg);
+ if (err)
+ return err;
+ }
+
+ err = atl1e_write_phy_reg(hw, MII_BMCR,
+ BMCR_RESET | BMCR_ANENABLE | BMCR_ANRESTART);
+ return err;
+}
+
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_hw.h b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.h
new file mode 100644
index 0000000000..3193f7d269
--- /dev/null
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.h
@@ -0,0 +1,677 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ */
+
+#ifndef _ATHL1E_HW_H_
+#define _ATHL1E_HW_H_
+
+#include <linux/types.h>
+#include <linux/mii.h>
+
+struct atl1e_adapter;
+struct atl1e_hw;
+
+/* function prototype */
+s32 atl1e_reset_hw(struct atl1e_hw *hw);
+s32 atl1e_read_mac_addr(struct atl1e_hw *hw);
+s32 atl1e_init_hw(struct atl1e_hw *hw);
+s32 atl1e_phy_commit(struct atl1e_hw *hw);
+s32 atl1e_get_speed_and_duplex(struct atl1e_hw *hw, u16 *speed, u16 *duplex);
+u32 atl1e_auto_get_fc(struct atl1e_adapter *adapter, u16 duplex);
+u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr);
+void atl1e_hash_set(struct atl1e_hw *hw, u32 hash_value);
+s32 atl1e_read_phy_reg(struct atl1e_hw *hw, u16 reg_addr, u16 *phy_data);
+s32 atl1e_write_phy_reg(struct atl1e_hw *hw, u32 reg_addr, u16 phy_data);
+s32 atl1e_validate_mdi_setting(struct atl1e_hw *hw);
+void atl1e_hw_set_mac_addr(struct atl1e_hw *hw);
+bool atl1e_read_eeprom(struct atl1e_hw *hw, u32 offset, u32 *p_value);
+bool atl1e_write_eeprom(struct atl1e_hw *hw, u32 offset, u32 value);
+s32 atl1e_phy_enter_power_saving(struct atl1e_hw *hw);
+s32 atl1e_phy_leave_power_saving(struct atl1e_hw *hw);
+s32 atl1e_phy_init(struct atl1e_hw *hw);
+int atl1e_check_eeprom_exist(struct atl1e_hw *hw);
+void atl1e_force_ps(struct atl1e_hw *hw);
+s32 atl1e_restart_autoneg(struct atl1e_hw *hw);
+
+/* register definition */
+#define REG_PM_CTRLSTAT 0x44
+
+#define REG_PCIE_CAP_LIST 0x58
+
+#define REG_DEVICE_CAP 0x5C
+#define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7
+#define DEVICE_CAP_MAX_PAYLOAD_SHIFT 0
+
+#define REG_DEVICE_CTRL 0x60
+#define DEVICE_CTRL_MAX_PAYLOAD_MASK 0x7
+#define DEVICE_CTRL_MAX_PAYLOAD_SHIFT 5
+#define DEVICE_CTRL_MAX_RREQ_SZ_MASK 0x7
+#define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT 12
+
+#define REG_VPD_CAP 0x6C
+#define VPD_CAP_ID_MASK 0xff
+#define VPD_CAP_ID_SHIFT 0
+#define VPD_CAP_NEXT_PTR_MASK 0xFF
+#define VPD_CAP_NEXT_PTR_SHIFT 8
+#define VPD_CAP_VPD_ADDR_MASK 0x7FFF
+#define VPD_CAP_VPD_ADDR_SHIFT 16
+#define VPD_CAP_VPD_FLAG 0x80000000
+
+#define REG_VPD_DATA 0x70
+
+#define REG_SPI_FLASH_CTRL 0x200
+#define SPI_FLASH_CTRL_STS_NON_RDY 0x1
+#define SPI_FLASH_CTRL_STS_WEN 0x2
+#define SPI_FLASH_CTRL_STS_WPEN 0x80
+#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF
+#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0
+#define SPI_FLASH_CTRL_INS_MASK 0x7
+#define SPI_FLASH_CTRL_INS_SHIFT 8
+#define SPI_FLASH_CTRL_START 0x800
+#define SPI_FLASH_CTRL_EN_VPD 0x2000
+#define SPI_FLASH_CTRL_LDSTART 0x8000
+#define SPI_FLASH_CTRL_CS_HI_MASK 0x3
+#define SPI_FLASH_CTRL_CS_HI_SHIFT 16
+#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3
+#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18
+#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3
+#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20
+#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3
+#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22
+#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3
+#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24
+#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3
+#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26
+#define SPI_FLASH_CTRL_WAIT_READY 0x10000000
+
+#define REG_SPI_ADDR 0x204
+
+#define REG_SPI_DATA 0x208
+
+#define REG_SPI_FLASH_CONFIG 0x20C
+#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF
+#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0
+#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3
+#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24
+#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000
+
+
+#define REG_SPI_FLASH_OP_PROGRAM 0x210
+#define REG_SPI_FLASH_OP_SC_ERASE 0x211
+#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212
+#define REG_SPI_FLASH_OP_RDID 0x213
+#define REG_SPI_FLASH_OP_WREN 0x214
+#define REG_SPI_FLASH_OP_RDSR 0x215
+#define REG_SPI_FLASH_OP_WRSR 0x216
+#define REG_SPI_FLASH_OP_READ 0x217
+
+#define REG_TWSI_CTRL 0x218
+#define TWSI_CTRL_LD_OFFSET_MASK 0xFF
+#define TWSI_CTRL_LD_OFFSET_SHIFT 0
+#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7
+#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8
+#define TWSI_CTRL_SW_LDSTART 0x800
+#define TWSI_CTRL_HW_LDSTART 0x1000
+#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F
+#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15
+#define TWSI_CTRL_LD_EXIST 0x400000
+#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3
+#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23
+#define TWSI_CTRL_FREQ_SEL_100K 0
+#define TWSI_CTRL_FREQ_SEL_200K 1
+#define TWSI_CTRL_FREQ_SEL_300K 2
+#define TWSI_CTRL_FREQ_SEL_400K 3
+#define TWSI_CTRL_SMB_SLV_ADDR
+#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3
+#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24
+
+
+#define REG_PCIE_DEV_MISC_CTRL 0x21C
+#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2
+#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1
+#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4
+#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8
+#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10
+
+#define REG_PCIE_PHYMISC 0x1000
+#define PCIE_PHYMISC_FORCE_RCV_DET 0x4
+
+#define REG_LTSSM_TEST_MODE 0x12FC
+#define LTSSM_TEST_MODE_DEF 0xE000
+
+/* Selene Master Control Register */
+#define REG_MASTER_CTRL 0x1400
+#define MASTER_CTRL_SOFT_RST 0x1
+#define MASTER_CTRL_MTIMER_EN 0x2
+#define MASTER_CTRL_ITIMER_EN 0x4
+#define MASTER_CTRL_MANUAL_INT 0x8
+#define MASTER_CTRL_ITIMER2_EN 0x20
+#define MASTER_CTRL_INT_RDCLR 0x40
+#define MASTER_CTRL_LED_MODE 0x200
+#define MASTER_CTRL_REV_NUM_SHIFT 16
+#define MASTER_CTRL_REV_NUM_MASK 0xff
+#define MASTER_CTRL_DEV_ID_SHIFT 24
+#define MASTER_CTRL_DEV_ID_MASK 0xff
+
+/* Timer Initial Value Register */
+#define REG_MANUAL_TIMER_INIT 0x1404
+
+
+/* IRQ ModeratorTimer Initial Value Register */
+#define REG_IRQ_MODU_TIMER_INIT 0x1408 /* w */
+#define REG_IRQ_MODU_TIMER2_INIT 0x140A /* w */
+
+
+#define REG_GPHY_CTRL 0x140C
+#define GPHY_CTRL_EXT_RESET 1
+#define GPHY_CTRL_PIPE_MOD 2
+#define GPHY_CTRL_TEST_MODE_MASK 3
+#define GPHY_CTRL_TEST_MODE_SHIFT 2
+#define GPHY_CTRL_BERT_START 0x10
+#define GPHY_CTRL_GATE_25M_EN 0x20
+#define GPHY_CTRL_LPW_EXIT 0x40
+#define GPHY_CTRL_PHY_IDDQ 0x80
+#define GPHY_CTRL_PHY_IDDQ_DIS 0x100
+#define GPHY_CTRL_PCLK_SEL_DIS 0x200
+#define GPHY_CTRL_HIB_EN 0x400
+#define GPHY_CTRL_HIB_PULSE 0x800
+#define GPHY_CTRL_SEL_ANA_RST 0x1000
+#define GPHY_CTRL_PHY_PLL_ON 0x2000
+#define GPHY_CTRL_PWDOWN_HW 0x4000
+#define GPHY_CTRL_DEFAULT (\
+ GPHY_CTRL_PHY_PLL_ON |\
+ GPHY_CTRL_SEL_ANA_RST |\
+ GPHY_CTRL_HIB_PULSE |\
+ GPHY_CTRL_HIB_EN)
+
+#define GPHY_CTRL_PW_WOL_DIS (\
+ GPHY_CTRL_PHY_PLL_ON |\
+ GPHY_CTRL_SEL_ANA_RST |\
+ GPHY_CTRL_HIB_PULSE |\
+ GPHY_CTRL_HIB_EN |\
+ GPHY_CTRL_PWDOWN_HW |\
+ GPHY_CTRL_PCLK_SEL_DIS |\
+ GPHY_CTRL_PHY_IDDQ)
+
+/* IRQ Anti-Lost Timer Initial Value Register */
+#define REG_CMBDISDMA_TIMER 0x140E
+
+
+/* Block IDLE Status Register */
+#define REG_IDLE_STATUS 0x1410
+#define IDLE_STATUS_RXMAC 1 /* 1: RXMAC state machine is in non-IDLE state. 0: RXMAC is idling */
+#define IDLE_STATUS_TXMAC 2 /* 1: TXMAC state machine is in non-IDLE state. 0: TXMAC is idling */
+#define IDLE_STATUS_RXQ 4 /* 1: RXQ state machine is in non-IDLE state. 0: RXQ is idling */
+#define IDLE_STATUS_TXQ 8 /* 1: TXQ state machine is in non-IDLE state. 0: TXQ is idling */
+#define IDLE_STATUS_DMAR 0x10 /* 1: DMAR state machine is in non-IDLE state. 0: DMAR is idling */
+#define IDLE_STATUS_DMAW 0x20 /* 1: DMAW state machine is in non-IDLE state. 0: DMAW is idling */
+#define IDLE_STATUS_SMB 0x40 /* 1: SMB state machine is in non-IDLE state. 0: SMB is idling */
+#define IDLE_STATUS_CMB 0x80 /* 1: CMB state machine is in non-IDLE state. 0: CMB is idling */
+
+/* MDIO Control Register */
+#define REG_MDIO_CTRL 0x1414
+#define MDIO_DATA_MASK 0xffff /* On MDIO write, the 16-bit control data to write to PHY MII management register */
+#define MDIO_DATA_SHIFT 0 /* On MDIO read, the 16-bit status data that was read from the PHY MII management register*/
+#define MDIO_REG_ADDR_MASK 0x1f /* MDIO register address */
+#define MDIO_REG_ADDR_SHIFT 16
+#define MDIO_RW 0x200000 /* 1: read, 0: write */
+#define MDIO_SUP_PREAMBLE 0x400000 /* Suppress preamble */
+#define MDIO_START 0x800000 /* Write 1 to initiate the MDIO master. And this bit is self cleared after one cycle*/
+#define MDIO_CLK_SEL_SHIFT 24
+#define MDIO_CLK_25_4 0
+#define MDIO_CLK_25_6 2
+#define MDIO_CLK_25_8 3
+#define MDIO_CLK_25_10 4
+#define MDIO_CLK_25_14 5
+#define MDIO_CLK_25_20 6
+#define MDIO_CLK_25_28 7
+#define MDIO_BUSY 0x8000000
+#define MDIO_AP_EN 0x10000000
+#define MDIO_WAIT_TIMES 10
+
+/* MII PHY Status Register */
+#define REG_PHY_STATUS 0x1418
+#define PHY_STATUS_100M 0x20000
+#define PHY_STATUS_EMI_CA 0x40000
+
+/* BIST Control and Status Register0 (for the Packet Memory) */
+#define REG_BIST0_CTRL 0x141c
+#define BIST0_NOW 0x1 /* 1: To trigger BIST0 logic. This bit stays high during the */
+/* BIST process and reset to zero when BIST is done */
+#define BIST0_SRAM_FAIL 0x2 /* 1: The SRAM failure is un-repairable because it has address */
+/* decoder failure or more than 1 cell stuck-to-x failure */
+#define BIST0_FUSE_FLAG 0x4 /* 1: Indicating one cell has been fixed */
+
+/* BIST Control and Status Register1(for the retry buffer of PCI Express) */
+#define REG_BIST1_CTRL 0x1420
+#define BIST1_NOW 0x1 /* 1: To trigger BIST0 logic. This bit stays high during the */
+/* BIST process and reset to zero when BIST is done */
+#define BIST1_SRAM_FAIL 0x2 /* 1: The SRAM failure is un-repairable because it has address */
+/* decoder failure or more than 1 cell stuck-to-x failure.*/
+#define BIST1_FUSE_FLAG 0x4
+
+/* SerDes Lock Detect Control and Status Register */
+#define REG_SERDES_LOCK 0x1424
+#define SERDES_LOCK_DETECT 1 /* 1: SerDes lock detected . This signal comes from Analog SerDes */
+#define SERDES_LOCK_DETECT_EN 2 /* 1: Enable SerDes Lock detect function */
+
+/* MAC Control Register */
+#define REG_MAC_CTRL 0x1480
+#define MAC_CTRL_TX_EN 1 /* 1: Transmit Enable */
+#define MAC_CTRL_RX_EN 2 /* 1: Receive Enable */
+#define MAC_CTRL_TX_FLOW 4 /* 1: Transmit Flow Control Enable */
+#define MAC_CTRL_RX_FLOW 8 /* 1: Receive Flow Control Enable */
+#define MAC_CTRL_LOOPBACK 0x10 /* 1: Loop back at G/MII Interface */
+#define MAC_CTRL_DUPLX 0x20 /* 1: Full-duplex mode 0: Half-duplex mode */
+#define MAC_CTRL_ADD_CRC 0x40 /* 1: Instruct MAC to attach CRC on all egress Ethernet frames */
+#define MAC_CTRL_PAD 0x80 /* 1: Instruct MAC to pad short frames to 60-bytes, and then attach CRC. This bit has higher priority over CRC_EN */
+#define MAC_CTRL_LENCHK 0x100 /* 1: Instruct MAC to check if length field matches the real packet length */
+#define MAC_CTRL_HUGE_EN 0x200 /* 1: receive Jumbo frame enable */
+#define MAC_CTRL_PRMLEN_SHIFT 10 /* Preamble length */
+#define MAC_CTRL_PRMLEN_MASK 0xf
+#define MAC_CTRL_RMV_VLAN 0x4000 /* 1: to remove VLAN Tag automatically from all receive packets */
+#define MAC_CTRL_PROMIS_EN 0x8000 /* 1: Promiscuous Mode Enable */
+#define MAC_CTRL_TX_PAUSE 0x10000 /* 1: transmit test pause */
+#define MAC_CTRL_SCNT 0x20000 /* 1: shortcut slot time counter */
+#define MAC_CTRL_SRST_TX 0x40000 /* 1: synchronized reset Transmit MAC module */
+#define MAC_CTRL_TX_SIMURST 0x80000 /* 1: transmit simulation reset */
+#define MAC_CTRL_SPEED_SHIFT 20 /* 10: gigabit 01:10M/100M */
+#define MAC_CTRL_SPEED_MASK 0x300000
+#define MAC_CTRL_SPEED_1000 2
+#define MAC_CTRL_SPEED_10_100 1
+#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 /* 1: transmit maximum backoff (half-duplex test bit) */
+#define MAC_CTRL_TX_HUGE 0x800000 /* 1: transmit huge enable */
+#define MAC_CTRL_RX_CHKSUM_EN 0x1000000 /* 1: RX checksum enable */
+#define MAC_CTRL_MC_ALL_EN 0x2000000 /* 1: upload all multicast frame without error to system */
+#define MAC_CTRL_BC_EN 0x4000000 /* 1: upload all broadcast frame without error to system */
+#define MAC_CTRL_DBG 0x8000000 /* 1: upload all received frame to system (Debug Mode) */
+
+/* MAC IPG/IFG Control Register */
+#define REG_MAC_IPG_IFG 0x1484
+#define MAC_IPG_IFG_IPGT_SHIFT 0 /* Desired back to back inter-packet gap. The default is 96-bit time */
+#define MAC_IPG_IFG_IPGT_MASK 0x7f
+#define MAC_IPG_IFG_MIFG_SHIFT 8 /* Minimum number of IFG to enforce in between RX frames */
+#define MAC_IPG_IFG_MIFG_MASK 0xff /* Frame gap below such IFP is dropped */
+#define MAC_IPG_IFG_IPGR1_SHIFT 16 /* 64bit Carrier-Sense window */
+#define MAC_IPG_IFG_IPGR1_MASK 0x7f
+#define MAC_IPG_IFG_IPGR2_SHIFT 24 /* 96-bit IPG window */
+#define MAC_IPG_IFG_IPGR2_MASK 0x7f
+
+/* MAC STATION ADDRESS */
+#define REG_MAC_STA_ADDR 0x1488
+
+/* Hash table for multicast address */
+#define REG_RX_HASH_TABLE 0x1490
+
+
+/* MAC Half-Duplex Control Register */
+#define REG_MAC_HALF_DUPLX_CTRL 0x1498
+#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 /* Collision Window */
+#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff
+#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 /* Retransmission maximum, afterwards the packet will be discarded */
+#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf
+#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 /* 1: Allow the transmission of a packet which has been excessively deferred */
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 /* 1: No back-off on collision, immediately start the retransmission */
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 /* 1: No back-off on backpressure, immediately start the transmission after back pressure */
+#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */
+#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 /* Maximum binary exponential number */
+#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 /* IPG to start JAM for collision based flow control in half-duplex */
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf /* mode. In unit of 8-bit time */
+
+/* Maximum Frame Length Control Register */
+#define REG_MTU 0x149c
+
+/* Wake-On-Lan control register */
+#define REG_WOL_CTRL 0x14a0
+#define WOL_PATTERN_EN 0x00000001
+#define WOL_PATTERN_PME_EN 0x00000002
+#define WOL_MAGIC_EN 0x00000004
+#define WOL_MAGIC_PME_EN 0x00000008
+#define WOL_LINK_CHG_EN 0x00000010
+#define WOL_LINK_CHG_PME_EN 0x00000020
+#define WOL_PATTERN_ST 0x00000100
+#define WOL_MAGIC_ST 0x00000200
+#define WOL_LINKCHG_ST 0x00000400
+#define WOL_CLK_SWITCH_EN 0x00008000
+#define WOL_PT0_EN 0x00010000
+#define WOL_PT1_EN 0x00020000
+#define WOL_PT2_EN 0x00040000
+#define WOL_PT3_EN 0x00080000
+#define WOL_PT4_EN 0x00100000
+#define WOL_PT5_EN 0x00200000
+#define WOL_PT6_EN 0x00400000
+/* WOL Length ( 2 DWORD ) */
+#define REG_WOL_PATTERN_LEN 0x14a4
+#define WOL_PT_LEN_MASK 0x7f
+#define WOL_PT0_LEN_SHIFT 0
+#define WOL_PT1_LEN_SHIFT 8
+#define WOL_PT2_LEN_SHIFT 16
+#define WOL_PT3_LEN_SHIFT 24
+#define WOL_PT4_LEN_SHIFT 0
+#define WOL_PT5_LEN_SHIFT 8
+#define WOL_PT6_LEN_SHIFT 16
+
+/* Internal SRAM Partition Register */
+#define REG_SRAM_TRD_ADDR 0x1518
+#define REG_SRAM_TRD_LEN 0x151C
+#define REG_SRAM_RXF_ADDR 0x1520
+#define REG_SRAM_RXF_LEN 0x1524
+#define REG_SRAM_TXF_ADDR 0x1528
+#define REG_SRAM_TXF_LEN 0x152C
+#define REG_SRAM_TCPH_ADDR 0x1530
+#define REG_SRAM_PKTH_ADDR 0x1532
+
+/* Load Ptr Register */
+#define REG_LOAD_PTR 0x1534 /* Software sets this bit after the initialization of the head and tail */
+
+/*
+ * addresses of all descriptors, as well as the following descriptor
+ * control register, which triggers each function block to load the head
+ * pointer to prepare for the operation. This bit is then self-cleared
+ * after one cycle.
+ */
+
+/* Descriptor Control register */
+#define REG_RXF3_BASE_ADDR_HI 0x153C
+#define REG_DESC_BASE_ADDR_HI 0x1540
+#define REG_RXF0_BASE_ADDR_HI 0x1540 /* share with DESC BASE ADDR HI */
+#define REG_HOST_RXF0_PAGE0_LO 0x1544
+#define REG_HOST_RXF0_PAGE1_LO 0x1548
+#define REG_TPD_BASE_ADDR_LO 0x154C
+#define REG_RXF1_BASE_ADDR_HI 0x1550
+#define REG_RXF2_BASE_ADDR_HI 0x1554
+#define REG_HOST_RXFPAGE_SIZE 0x1558
+#define REG_TPD_RING_SIZE 0x155C
+/* RSS about */
+#define REG_RSS_KEY0 0x14B0
+#define REG_RSS_KEY1 0x14B4
+#define REG_RSS_KEY2 0x14B8
+#define REG_RSS_KEY3 0x14BC
+#define REG_RSS_KEY4 0x14C0
+#define REG_RSS_KEY5 0x14C4
+#define REG_RSS_KEY6 0x14C8
+#define REG_RSS_KEY7 0x14CC
+#define REG_RSS_KEY8 0x14D0
+#define REG_RSS_KEY9 0x14D4
+#define REG_IDT_TABLE4 0x14E0
+#define REG_IDT_TABLE5 0x14E4
+#define REG_IDT_TABLE6 0x14E8
+#define REG_IDT_TABLE7 0x14EC
+#define REG_IDT_TABLE0 0x1560
+#define REG_IDT_TABLE1 0x1564
+#define REG_IDT_TABLE2 0x1568
+#define REG_IDT_TABLE3 0x156C
+#define REG_IDT_TABLE REG_IDT_TABLE0
+#define REG_RSS_HASH_VALUE 0x1570
+#define REG_RSS_HASH_FLAG 0x1574
+#define REG_BASE_CPU_NUMBER 0x157C
+
+
+/* TXQ Control Register */
+#define REG_TXQ_CTRL 0x1580
+#define TXQ_CTRL_NUM_TPD_BURST_MASK 0xF
+#define TXQ_CTRL_NUM_TPD_BURST_SHIFT 0
+#define TXQ_CTRL_EN 0x20 /* 1: Enable TXQ */
+#define TXQ_CTRL_ENH_MODE 0x40 /* Performance enhancement mode, in which up to two back-to-back DMA read commands might be dispatched. */
+#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16 /* Number of data byte to read in a cache-aligned burst. Each SRAM entry is 8-byte in length. */
+#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xffff
+
+/* Jumbo packet Threshold for task offload */
+#define REG_TX_EARLY_TH 0x1584 /* Jumbo frame threshold in QWORD unit. Packet greater than */
+/* JUMBO_TASK_OFFLOAD_THRESHOLD will not be task offloaded. */
+#define TX_TX_EARLY_TH_MASK 0x7ff
+#define TX_TX_EARLY_TH_SHIFT 0
+
+
+/* RXQ Control Register */
+#define REG_RXQ_CTRL 0x15A0
+#define RXQ_CTRL_PBA_ALIGN_32 0 /* rx-packet alignment */
+#define RXQ_CTRL_PBA_ALIGN_64 1
+#define RXQ_CTRL_PBA_ALIGN_128 2
+#define RXQ_CTRL_PBA_ALIGN_256 3
+#define RXQ_CTRL_Q1_EN 0x10
+#define RXQ_CTRL_Q2_EN 0x20
+#define RXQ_CTRL_Q3_EN 0x40
+#define RXQ_CTRL_IPV6_XSUM_VERIFY_EN 0x80
+#define RXQ_CTRL_HASH_TLEN_SHIFT 8
+#define RXQ_CTRL_HASH_TLEN_MASK 0xFF
+#define RXQ_CTRL_HASH_TYPE_IPV4 0x10000
+#define RXQ_CTRL_HASH_TYPE_IPV4_TCP 0x20000
+#define RXQ_CTRL_HASH_TYPE_IPV6 0x40000
+#define RXQ_CTRL_HASH_TYPE_IPV6_TCP 0x80000
+#define RXQ_CTRL_RSS_MODE_DISABLE 0
+#define RXQ_CTRL_RSS_MODE_SQSINT 0x4000000
+#define RXQ_CTRL_RSS_MODE_MQUESINT 0x8000000
+#define RXQ_CTRL_RSS_MODE_MQUEMINT 0xC000000
+#define RXQ_CTRL_NIP_QUEUE_SEL_TBL 0x10000000
+#define RXQ_CTRL_HASH_ENABLE 0x20000000
+#define RXQ_CTRL_CUT_THRU_EN 0x40000000
+#define RXQ_CTRL_EN 0x80000000
+
+/* Rx jumbo packet threshold and rrd retirement timer */
+#define REG_RXQ_JMBOSZ_RRDTIM 0x15A4
+/*
+ * Jumbo packet threshold for non-VLAN packet, in QWORD (64-bit) unit.
+ * When the packet length greater than or equal to this value, RXQ
+ * shall start cut-through forwarding of the received packet.
+ */
+#define RXQ_JMBOSZ_TH_MASK 0x7ff
+#define RXQ_JMBOSZ_TH_SHIFT 0 /* RRD retirement timer. Decrement by 1 after every 512ns passes*/
+#define RXQ_JMBO_LKAH_MASK 0xf
+#define RXQ_JMBO_LKAH_SHIFT 11
+
+/* RXF flow control register */
+#define REG_RXQ_RXF_PAUSE_THRESH 0x15A8
+#define RXQ_RXF_PAUSE_TH_HI_SHIFT 0
+#define RXQ_RXF_PAUSE_TH_HI_MASK 0xfff
+#define RXQ_RXF_PAUSE_TH_LO_SHIFT 16
+#define RXQ_RXF_PAUSE_TH_LO_MASK 0xfff
+
+
+/* DMA Engine Control Register */
+#define REG_DMA_CTRL 0x15C0
+#define DMA_CTRL_DMAR_IN_ORDER 0x1
+#define DMA_CTRL_DMAR_ENH_ORDER 0x2
+#define DMA_CTRL_DMAR_OUT_ORDER 0x4
+#define DMA_CTRL_RCB_VALUE 0x8
+#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4
+#define DMA_CTRL_DMAR_BURST_LEN_MASK 7
+#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7
+#define DMA_CTRL_DMAW_BURST_LEN_MASK 7
+#define DMA_CTRL_DMAR_REQ_PRI 0x400
+#define DMA_CTRL_DMAR_DLY_CNT_MASK 0x1F
+#define DMA_CTRL_DMAR_DLY_CNT_SHIFT 11
+#define DMA_CTRL_DMAW_DLY_CNT_MASK 0xF
+#define DMA_CTRL_DMAW_DLY_CNT_SHIFT 16
+#define DMA_CTRL_TXCMB_EN 0x100000
+#define DMA_CTRL_RXCMB_EN 0x200000
+
+
+/* CMB/SMB Control Register */
+#define REG_SMB_STAT_TIMER 0x15C4
+#define REG_TRIG_RRD_THRESH 0x15CA
+#define REG_TRIG_TPD_THRESH 0x15C8
+#define REG_TRIG_TXTIMER 0x15CC
+#define REG_TRIG_RXTIMER 0x15CE
+
+/* HOST RXF Page 1,2,3 address */
+#define REG_HOST_RXF1_PAGE0_LO 0x15D0
+#define REG_HOST_RXF1_PAGE1_LO 0x15D4
+#define REG_HOST_RXF2_PAGE0_LO 0x15D8
+#define REG_HOST_RXF2_PAGE1_LO 0x15DC
+#define REG_HOST_RXF3_PAGE0_LO 0x15E0
+#define REG_HOST_RXF3_PAGE1_LO 0x15E4
+
+/* Mail box */
+#define REG_MB_RXF1_RADDR 0x15B4
+#define REG_MB_RXF2_RADDR 0x15B8
+#define REG_MB_RXF3_RADDR 0x15BC
+#define REG_MB_TPD_PROD_IDX 0x15F0
+
+/* RXF-Page 0-3 PageNo & Valid bit */
+#define REG_HOST_RXF0_PAGE0_VLD 0x15F4
+#define HOST_RXF_VALID 1
+#define HOST_RXF_PAGENO_SHIFT 1
+#define HOST_RXF_PAGENO_MASK 0x7F
+#define REG_HOST_RXF0_PAGE1_VLD 0x15F5
+#define REG_HOST_RXF1_PAGE0_VLD 0x15F6
+#define REG_HOST_RXF1_PAGE1_VLD 0x15F7
+#define REG_HOST_RXF2_PAGE0_VLD 0x15F8
+#define REG_HOST_RXF2_PAGE1_VLD 0x15F9
+#define REG_HOST_RXF3_PAGE0_VLD 0x15FA
+#define REG_HOST_RXF3_PAGE1_VLD 0x15FB
+
+/* Interrupt Status Register */
+#define REG_ISR 0x1600
+#define ISR_SMB 1
+#define ISR_TIMER 2 /* Interrupt when Timer is counted down to zero */
+/*
+ * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set
+ * in Table 51 Selene Master Control Register (Offset 0x1400).
+ */
+#define ISR_MANUAL 4
+#define ISR_HW_RXF_OV 8 /* RXF overflow interrupt */
+#define ISR_HOST_RXF0_OV 0x10
+#define ISR_HOST_RXF1_OV 0x20
+#define ISR_HOST_RXF2_OV 0x40
+#define ISR_HOST_RXF3_OV 0x80
+#define ISR_TXF_UN 0x100
+#define ISR_RX0_PAGE_FULL 0x200
+#define ISR_DMAR_TO_RST 0x400
+#define ISR_DMAW_TO_RST 0x800
+#define ISR_GPHY 0x1000
+#define ISR_TX_CREDIT 0x2000
+#define ISR_GPHY_LPW 0x4000 /* GPHY low power state interrupt */
+#define ISR_RX_PKT 0x10000 /* One packet received, triggered by RFD */
+#define ISR_TX_PKT 0x20000 /* One packet transmitted, triggered by TPD */
+#define ISR_TX_DMA 0x40000
+#define ISR_RX_PKT_1 0x80000
+#define ISR_RX_PKT_2 0x100000
+#define ISR_RX_PKT_3 0x200000
+#define ISR_MAC_RX 0x400000
+#define ISR_MAC_TX 0x800000
+#define ISR_UR_DETECTED 0x1000000
+#define ISR_FERR_DETECTED 0x2000000
+#define ISR_NFERR_DETECTED 0x4000000
+#define ISR_CERR_DETECTED 0x8000000
+#define ISR_PHY_LINKDOWN 0x10000000
+#define ISR_DIS_INT 0x80000000
+
+
+/* Interrupt Mask Register */
+#define REG_IMR 0x1604
+
+
+#define IMR_NORMAL_MASK (\
+ ISR_SMB |\
+ ISR_TXF_UN |\
+ ISR_HW_RXF_OV |\
+ ISR_HOST_RXF0_OV|\
+ ISR_MANUAL |\
+ ISR_GPHY |\
+ ISR_GPHY_LPW |\
+ ISR_DMAR_TO_RST |\
+ ISR_DMAW_TO_RST |\
+ ISR_PHY_LINKDOWN|\
+ ISR_RX_PKT |\
+ ISR_TX_PKT)
+
+#define ISR_TX_EVENT (ISR_TXF_UN | ISR_TX_PKT)
+#define ISR_RX_EVENT (ISR_HOST_RXF0_OV | ISR_HW_RXF_OV | ISR_RX_PKT)
+
+#define REG_MAC_RX_STATUS_BIN 0x1700
+#define REG_MAC_RX_STATUS_END 0x175c
+#define REG_MAC_TX_STATUS_BIN 0x1760
+#define REG_MAC_TX_STATUS_END 0x17c0
+
+/* Hardware Offset Register */
+#define REG_HOST_RXF0_PAGEOFF 0x1800
+#define REG_TPD_CONS_IDX 0x1804
+#define REG_HOST_RXF1_PAGEOFF 0x1808
+#define REG_HOST_RXF2_PAGEOFF 0x180C
+#define REG_HOST_RXF3_PAGEOFF 0x1810
+
+/* RXF-Page 0-3 Offset DMA Address */
+#define REG_HOST_RXF0_MB0_LO 0x1820
+#define REG_HOST_RXF0_MB1_LO 0x1824
+#define REG_HOST_RXF1_MB0_LO 0x1828
+#define REG_HOST_RXF1_MB1_LO 0x182C
+#define REG_HOST_RXF2_MB0_LO 0x1830
+#define REG_HOST_RXF2_MB1_LO 0x1834
+#define REG_HOST_RXF3_MB0_LO 0x1838
+#define REG_HOST_RXF3_MB1_LO 0x183C
+
+/* Tpd CMB DMA Address */
+#define REG_HOST_TX_CMB_LO 0x1840
+#define REG_HOST_SMB_ADDR_LO 0x1844
+
+/* DEBUG ADDR */
+#define REG_DEBUG_DATA0 0x1900
+#define REG_DEBUG_DATA1 0x1904
+
+/***************************** MII definition ***************************************/
+/* PHY Common Register */
+#define MII_AT001_PSCR 0x10
+#define MII_AT001_PSSR 0x11
+#define MII_INT_CTRL 0x12
+#define MII_INT_STATUS 0x13
+#define MII_SMARTSPEED 0x14
+#define MII_LBRERROR 0x18
+#define MII_RESV2 0x1a
+
+#define MII_DBG_ADDR 0x1D
+#define MII_DBG_DATA 0x1E
+
+/* Autoneg Advertisement Register */
+#define MII_AR_DEFAULT_CAP_MASK 0
+
+/* 1000BASE-T Control Register */
+#define MII_AT001_CR_1000T_SPEED_MASK \
+ (ADVERTISE_1000FULL | ADVERTISE_1000HALF)
+#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK MII_AT001_CR_1000T_SPEED_MASK
+
+/* AT001 PHY Specific Control Register */
+#define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define MII_AT001_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+#define MII_AT001_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define MII_AT001_PSCR_MAC_POWERDOWN 0x0008
+#define MII_AT001_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
+ * 0=CLK125 toggling
+ */
+#define MII_AT001_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+/* Manual MDI configuration */
+#define MII_AT001_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define MII_AT001_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
+ * 100BASE-TX/10BASE-T:
+ * MDI Mode
+ */
+#define MII_AT001_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
+ * all speeds.
+ */
+#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE 0x0080
+/* 1=Enable Extended 10BASE-T distance
+ * (Lower 10BASE-T RX Threshold)
+ * 0=Normal 10BASE-T RX Threshold */
+#define MII_AT001_PSCR_MII_5BIT_ENABLE 0x0100
+/* 1=5-Bit interface in 100BASE-TX
+ * 0=MII interface in 100BASE-TX */
+#define MII_AT001_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define MII_AT001_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define MII_AT001_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT 1
+#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT 5
+#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
+/* AT001 PHY Specific Status Register */
+#define MII_AT001_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define MII_AT001_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define MII_AT001_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define MII_AT001_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define MII_AT001_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define MII_AT001_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#endif /*_ATHL1E_HW_H_*/
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
new file mode 100644
index 0000000000..5f2a6fcba9
--- /dev/null
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -0,0 +1,2566 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ */
+
+#include "atl1e.h"
+
+char atl1e_driver_name[] = "ATL1E";
+#define PCI_DEVICE_ID_ATTANSIC_L1E 0x1026
+/*
+ * atl1e_pci_tbl - PCI Device ID Table
+ *
+ * Wildcard entries (PCI_ANY_ID) should come last
+ * Last entry must be all 0s
+ *
+ * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+ * Class, Class Mask, private data (not used) }
+ */
+static const struct pci_device_id atl1e_pci_tbl[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)},
+ /* required last entry */
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, atl1e_pci_tbl);
+
+MODULE_AUTHOR("Atheros Corporation, <xiong.huang@atheros.com>, Jie Yang <jie.yang@atheros.com>");
+MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver");
+MODULE_LICENSE("GPL");
+
+static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter);
+
+static const u16
+atl1e_rx_page_vld_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] =
+{
+ {REG_HOST_RXF0_PAGE0_VLD, REG_HOST_RXF0_PAGE1_VLD},
+ {REG_HOST_RXF1_PAGE0_VLD, REG_HOST_RXF1_PAGE1_VLD},
+ {REG_HOST_RXF2_PAGE0_VLD, REG_HOST_RXF2_PAGE1_VLD},
+ {REG_HOST_RXF3_PAGE0_VLD, REG_HOST_RXF3_PAGE1_VLD}
+};
+
+static const u16 atl1e_rx_page_hi_addr_regs[AT_MAX_RECEIVE_QUEUE] =
+{
+ REG_RXF0_BASE_ADDR_HI,
+ REG_RXF1_BASE_ADDR_HI,
+ REG_RXF2_BASE_ADDR_HI,
+ REG_RXF3_BASE_ADDR_HI
+};
+
+static const u16
+atl1e_rx_page_lo_addr_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] =
+{
+ {REG_HOST_RXF0_PAGE0_LO, REG_HOST_RXF0_PAGE1_LO},
+ {REG_HOST_RXF1_PAGE0_LO, REG_HOST_RXF1_PAGE1_LO},
+ {REG_HOST_RXF2_PAGE0_LO, REG_HOST_RXF2_PAGE1_LO},
+ {REG_HOST_RXF3_PAGE0_LO, REG_HOST_RXF3_PAGE1_LO}
+};
+
+static const u16
+atl1e_rx_page_write_offset_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] =
+{
+ {REG_HOST_RXF0_MB0_LO, REG_HOST_RXF0_MB1_LO},
+ {REG_HOST_RXF1_MB0_LO, REG_HOST_RXF1_MB1_LO},
+ {REG_HOST_RXF2_MB0_LO, REG_HOST_RXF2_MB1_LO},
+ {REG_HOST_RXF3_MB0_LO, REG_HOST_RXF3_MB1_LO}
+};
+
+static const u16 atl1e_pay_load_size[] = {
+ 128, 256, 512, 1024, 2048, 4096,
+};
+
+/**
+ * atl1e_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ */
+static inline void atl1e_irq_enable(struct atl1e_adapter *adapter)
+{
+ if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
+ AT_WRITE_REG(&adapter->hw, REG_ISR, 0);
+ AT_WRITE_REG(&adapter->hw, REG_IMR, IMR_NORMAL_MASK);
+ AT_WRITE_FLUSH(&adapter->hw);
+ }
+}
+
+/**
+ * atl1e_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ */
+static inline void atl1e_irq_disable(struct atl1e_adapter *adapter)
+{
+ atomic_inc(&adapter->irq_sem);
+ AT_WRITE_REG(&adapter->hw, REG_IMR, 0);
+ AT_WRITE_FLUSH(&adapter->hw);
+ synchronize_irq(adapter->pdev->irq);
+}
+
+/**
+ * atl1e_irq_reset - reset interrupt confiure on the NIC
+ * @adapter: board private structure
+ */
+static inline void atl1e_irq_reset(struct atl1e_adapter *adapter)
+{
+ atomic_set(&adapter->irq_sem, 0);
+ AT_WRITE_REG(&adapter->hw, REG_ISR, 0);
+ AT_WRITE_REG(&adapter->hw, REG_IMR, 0);
+ AT_WRITE_FLUSH(&adapter->hw);
+}
+
+/**
+ * atl1e_phy_config - Timer Call-back
+ * @t: timer list containing pointer to netdev cast into an unsigned long
+ */
+static void atl1e_phy_config(struct timer_list *t)
+{
+ struct atl1e_adapter *adapter = from_timer(adapter, t,
+ phy_config_timer);
+ struct atl1e_hw *hw = &adapter->hw;
+ unsigned long flags;
+
+ spin_lock_irqsave(&adapter->mdio_lock, flags);
+ atl1e_restart_autoneg(hw);
+ spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+}
+
+void atl1e_reinit_locked(struct atl1e_adapter *adapter)
+{
+ while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
+ msleep(1);
+ atl1e_down(adapter);
+ atl1e_up(adapter);
+ clear_bit(__AT_RESETTING, &adapter->flags);
+}
+
+static void atl1e_reset_task(struct work_struct *work)
+{
+ struct atl1e_adapter *adapter;
+ adapter = container_of(work, struct atl1e_adapter, reset_task);
+
+ atl1e_reinit_locked(adapter);
+}
+
+static int atl1e_check_link(struct atl1e_adapter *adapter)
+{
+ struct atl1e_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ int err = 0;
+ u16 speed, duplex, phy_data;
+
+ /* MII_BMSR must read twice */
+ atl1e_read_phy_reg(hw, MII_BMSR, &phy_data);
+ atl1e_read_phy_reg(hw, MII_BMSR, &phy_data);
+ if ((phy_data & BMSR_LSTATUS) == 0) {
+ /* link down */
+ if (netif_carrier_ok(netdev)) { /* old link state: Up */
+ u32 value;
+ /* disable rx */
+ value = AT_READ_REG(hw, REG_MAC_CTRL);
+ value &= ~MAC_CTRL_RX_EN;
+ AT_WRITE_REG(hw, REG_MAC_CTRL, value);
+ adapter->link_speed = SPEED_0;
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+ }
+ } else {
+ /* Link Up */
+ err = atl1e_get_speed_and_duplex(hw, &speed, &duplex);
+ if (unlikely(err))
+ return err;
+
+ /* link result is our setting */
+ if (adapter->link_speed != speed ||
+ adapter->link_duplex != duplex) {
+ adapter->link_speed = speed;
+ adapter->link_duplex = duplex;
+ atl1e_setup_mac_ctrl(adapter);
+ netdev_info(netdev,
+ "NIC Link is Up <%d Mbps %s Duplex>\n",
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full" : "Half");
+ }
+
+ if (!netif_carrier_ok(netdev)) {
+ /* Link down -> Up */
+ netif_carrier_on(netdev);
+ netif_wake_queue(netdev);
+ }
+ }
+ return 0;
+}
+
+/**
+ * atl1e_link_chg_task - deal with link change event Out of interrupt context
+ * @work: work struct with driver info
+ */
+static void atl1e_link_chg_task(struct work_struct *work)
+{
+ struct atl1e_adapter *adapter;
+ unsigned long flags;
+
+ adapter = container_of(work, struct atl1e_adapter, link_chg_task);
+ spin_lock_irqsave(&adapter->mdio_lock, flags);
+ atl1e_check_link(adapter);
+ spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+}
+
+static void atl1e_link_chg_event(struct atl1e_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ u16 phy_data = 0;
+ u16 link_up = 0;
+
+ spin_lock(&adapter->mdio_lock);
+ atl1e_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+ atl1e_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+ spin_unlock(&adapter->mdio_lock);
+ link_up = phy_data & BMSR_LSTATUS;
+ /* notify upper layer link down ASAP */
+ if (!link_up) {
+ if (netif_carrier_ok(netdev)) {
+ /* old link state: Up */
+ netdev_info(netdev, "NIC Link is Down\n");
+ adapter->link_speed = SPEED_0;
+ netif_stop_queue(netdev);
+ }
+ }
+ schedule_work(&adapter->link_chg_task);
+}
+
+static void atl1e_del_timer(struct atl1e_adapter *adapter)
+{
+ del_timer_sync(&adapter->phy_config_timer);
+}
+
+static void atl1e_cancel_work(struct atl1e_adapter *adapter)
+{
+ cancel_work_sync(&adapter->reset_task);
+ cancel_work_sync(&adapter->link_chg_task);
+}
+
+/**
+ * atl1e_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ * @txqueue: the index of the hanging queue
+ */
+static void atl1e_tx_timeout(struct net_device *netdev, unsigned int txqueue)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ schedule_work(&adapter->reset_task);
+}
+
+/**
+ * atl1e_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ */
+static void atl1e_set_multi(struct net_device *netdev)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ struct atl1e_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ u32 mac_ctrl_data = 0;
+ u32 hash_value;
+
+ /* Check for Promiscuous and All Multicast modes */
+ mac_ctrl_data = AT_READ_REG(hw, REG_MAC_CTRL);
+
+ if (netdev->flags & IFF_PROMISC) {
+ mac_ctrl_data |= MAC_CTRL_PROMIS_EN;
+ } else if (netdev->flags & IFF_ALLMULTI) {
+ mac_ctrl_data |= MAC_CTRL_MC_ALL_EN;
+ mac_ctrl_data &= ~MAC_CTRL_PROMIS_EN;
+ } else {
+ mac_ctrl_data &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
+ }
+
+ AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+
+ /* clear the old settings from the multicast hash table */
+ AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
+ AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
+
+ /* comoute mc addresses' hash value ,and put it into hash table */
+ netdev_for_each_mc_addr(ha, netdev) {
+ hash_value = atl1e_hash_mc_addr(hw, ha->addr);
+ atl1e_hash_set(hw, hash_value);
+ }
+}
+
+static void __atl1e_rx_mode(netdev_features_t features, u32 *mac_ctrl_data)
+{
+
+ if (features & NETIF_F_RXALL) {
+ /* enable RX of ALL frames */
+ *mac_ctrl_data |= MAC_CTRL_DBG;
+ } else {
+ /* disable RX of ALL frames */
+ *mac_ctrl_data &= ~MAC_CTRL_DBG;
+ }
+}
+
+static void atl1e_rx_mode(struct net_device *netdev,
+ netdev_features_t features)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ u32 mac_ctrl_data = 0;
+
+ netdev_dbg(adapter->netdev, "%s\n", __func__);
+
+ atl1e_irq_disable(adapter);
+ mac_ctrl_data = AT_READ_REG(&adapter->hw, REG_MAC_CTRL);
+ __atl1e_rx_mode(features, &mac_ctrl_data);
+ AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data);
+ atl1e_irq_enable(adapter);
+}
+
+
+static void __atl1e_vlan_mode(netdev_features_t features, u32 *mac_ctrl_data)
+{
+ if (features & NETIF_F_HW_VLAN_CTAG_RX) {
+ /* enable VLAN tag insert/strip */
+ *mac_ctrl_data |= MAC_CTRL_RMV_VLAN;
+ } else {
+ /* disable VLAN tag insert/strip */
+ *mac_ctrl_data &= ~MAC_CTRL_RMV_VLAN;
+ }
+}
+
+static void atl1e_vlan_mode(struct net_device *netdev,
+ netdev_features_t features)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ u32 mac_ctrl_data = 0;
+
+ netdev_dbg(adapter->netdev, "%s\n", __func__);
+
+ atl1e_irq_disable(adapter);
+ mac_ctrl_data = AT_READ_REG(&adapter->hw, REG_MAC_CTRL);
+ __atl1e_vlan_mode(features, &mac_ctrl_data);
+ AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data);
+ atl1e_irq_enable(adapter);
+}
+
+static void atl1e_restore_vlan(struct atl1e_adapter *adapter)
+{
+ netdev_dbg(adapter->netdev, "%s\n", __func__);
+ atl1e_vlan_mode(adapter->netdev, adapter->netdev->features);
+}
+
+/**
+ * atl1e_set_mac_addr - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int atl1e_set_mac_addr(struct net_device *netdev, void *p)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ if (netif_running(netdev))
+ return -EBUSY;
+
+ eth_hw_addr_set(netdev, addr->sa_data);
+ memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
+
+ atl1e_hw_set_mac_addr(&adapter->hw);
+
+ return 0;
+}
+
+static netdev_features_t atl1e_fix_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ /*
+ * Since there is no support for separate rx/tx vlan accel
+ * enable/disable make sure tx flag is always in same state as rx.
+ */
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ features |= NETIF_F_HW_VLAN_CTAG_TX;
+ else
+ features &= ~NETIF_F_HW_VLAN_CTAG_TX;
+
+ return features;
+}
+
+static int atl1e_set_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ netdev_features_t changed = netdev->features ^ features;
+
+ if (changed & NETIF_F_HW_VLAN_CTAG_RX)
+ atl1e_vlan_mode(netdev, features);
+
+ if (changed & NETIF_F_RXALL)
+ atl1e_rx_mode(netdev, features);
+
+
+ return 0;
+}
+
+/**
+ * atl1e_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int atl1e_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
+
+ /* set MTU */
+ if (netif_running(netdev)) {
+ while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
+ msleep(1);
+ netdev->mtu = new_mtu;
+ adapter->hw.max_frame_size = new_mtu;
+ adapter->hw.rx_jumbo_th = (max_frame + 7) >> 3;
+ atl1e_down(adapter);
+ atl1e_up(adapter);
+ clear_bit(__AT_RESETTING, &adapter->flags);
+ }
+ return 0;
+}
+
+/*
+ * caller should hold mdio_lock
+ */
+static int atl1e_mdio_read(struct net_device *netdev, int phy_id, int reg_num)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ u16 result;
+
+ atl1e_read_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, &result);
+ return result;
+}
+
+static void atl1e_mdio_write(struct net_device *netdev, int phy_id,
+ int reg_num, int val)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ if (atl1e_write_phy_reg(&adapter->hw,
+ reg_num & MDIO_REG_ADDR_MASK, val))
+ netdev_err(netdev, "write phy register failed\n");
+}
+
+static int atl1e_mii_ioctl(struct net_device *netdev,
+ struct ifreq *ifr, int cmd)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+ unsigned long flags;
+ int retval = 0;
+
+ if (!netif_running(netdev))
+ return -EINVAL;
+
+ spin_lock_irqsave(&adapter->mdio_lock, flags);
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = 0;
+ break;
+
+ case SIOCGMIIREG:
+ if (atl1e_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+ &data->val_out)) {
+ retval = -EIO;
+ goto out;
+ }
+ break;
+
+ case SIOCSMIIREG:
+ if (data->reg_num & ~(0x1F)) {
+ retval = -EFAULT;
+ goto out;
+ }
+
+ netdev_dbg(adapter->netdev, "<atl1e_mii_ioctl> write %x %x\n",
+ data->reg_num, data->val_in);
+ if (atl1e_write_phy_reg(&adapter->hw,
+ data->reg_num, data->val_in)) {
+ retval = -EIO;
+ goto out;
+ }
+ break;
+
+ default:
+ retval = -EOPNOTSUPP;
+ break;
+ }
+out:
+ spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+ return retval;
+
+}
+
+static int atl1e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return atl1e_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void atl1e_setup_pcicmd(struct pci_dev *pdev)
+{
+ u16 cmd;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ cmd &= ~(PCI_COMMAND_INTX_DISABLE | PCI_COMMAND_IO);
+ cmd |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+
+ /*
+ * some motherboards BIOS(PXE/EFI) driver may set PME
+ * while they transfer control to OS (Windows/Linux)
+ * so we should clear this bit before NIC work normally
+ */
+ pci_write_config_dword(pdev, REG_PM_CTRLSTAT, 0);
+ msleep(1);
+}
+
+/**
+ * atl1e_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ */
+static int atl1e_alloc_queues(struct atl1e_adapter *adapter)
+{
+ return 0;
+}
+
+/**
+ * atl1e_sw_init - Initialize general software structures (struct atl1e_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * atl1e_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ */
+static int atl1e_sw_init(struct atl1e_adapter *adapter)
+{
+ struct atl1e_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 phy_status_data = 0;
+
+ adapter->wol = 0;
+ adapter->link_speed = SPEED_0; /* hardware init */
+ adapter->link_duplex = FULL_DUPLEX;
+ adapter->num_rx_queues = 1;
+
+ /* PCI config space info */
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_id = pdev->subsystem_device;
+ hw->revision_id = pdev->revision;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+ phy_status_data = AT_READ_REG(hw, REG_PHY_STATUS);
+ /* nic type */
+ if (hw->revision_id >= 0xF0) {
+ hw->nic_type = athr_l2e_revB;
+ } else {
+ if (phy_status_data & PHY_STATUS_100M)
+ hw->nic_type = athr_l1e;
+ else
+ hw->nic_type = athr_l2e_revA;
+ }
+
+ phy_status_data = AT_READ_REG(hw, REG_PHY_STATUS);
+
+ if (phy_status_data & PHY_STATUS_EMI_CA)
+ hw->emi_ca = true;
+ else
+ hw->emi_ca = false;
+
+ hw->phy_configured = false;
+ hw->preamble_len = 7;
+ hw->max_frame_size = adapter->netdev->mtu;
+ hw->rx_jumbo_th = (hw->max_frame_size + ETH_HLEN +
+ VLAN_HLEN + ETH_FCS_LEN + 7) >> 3;
+
+ hw->rrs_type = atl1e_rrs_disable;
+ hw->indirect_tab = 0;
+ hw->base_cpu = 0;
+
+ /* need confirm */
+
+ hw->ict = 50000; /* 100ms */
+ hw->smb_timer = 200000; /* 200ms */
+ hw->tpd_burst = 5;
+ hw->rrd_thresh = 1;
+ hw->tpd_thresh = adapter->tx_ring.count / 2;
+ hw->rx_count_down = 4; /* 2us resolution */
+ hw->tx_count_down = hw->imt * 4 / 3;
+ hw->dmar_block = atl1e_dma_req_1024;
+ hw->dmaw_block = atl1e_dma_req_1024;
+ hw->dmar_dly_cnt = 15;
+ hw->dmaw_dly_cnt = 4;
+
+ if (atl1e_alloc_queues(adapter)) {
+ netdev_err(adapter->netdev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ atomic_set(&adapter->irq_sem, 1);
+ spin_lock_init(&adapter->mdio_lock);
+
+ set_bit(__AT_DOWN, &adapter->flags);
+
+ return 0;
+}
+
+/**
+ * atl1e_clean_tx_ring - Free Tx-skb
+ * @adapter: board private structure
+ */
+static void atl1e_clean_tx_ring(struct atl1e_adapter *adapter)
+{
+ struct atl1e_tx_ring *tx_ring = &adapter->tx_ring;
+ struct atl1e_tx_buffer *tx_buffer = NULL;
+ struct pci_dev *pdev = adapter->pdev;
+ u16 index, ring_count;
+
+ if (tx_ring->desc == NULL || tx_ring->tx_buffer == NULL)
+ return;
+
+ ring_count = tx_ring->count;
+ /* first unmmap dma */
+ for (index = 0; index < ring_count; index++) {
+ tx_buffer = &tx_ring->tx_buffer[index];
+ if (tx_buffer->dma) {
+ if (tx_buffer->flags & ATL1E_TX_PCIMAP_SINGLE)
+ dma_unmap_single(&pdev->dev, tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
+ else if (tx_buffer->flags & ATL1E_TX_PCIMAP_PAGE)
+ dma_unmap_page(&pdev->dev, tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
+ tx_buffer->dma = 0;
+ }
+ }
+ /* second free skb */
+ for (index = 0; index < ring_count; index++) {
+ tx_buffer = &tx_ring->tx_buffer[index];
+ if (tx_buffer->skb) {
+ dev_kfree_skb_any(tx_buffer->skb);
+ tx_buffer->skb = NULL;
+ }
+ }
+ /* Zero out Tx-buffers */
+ memset(tx_ring->desc, 0, sizeof(struct atl1e_tpd_desc) *
+ ring_count);
+ memset(tx_ring->tx_buffer, 0, sizeof(struct atl1e_tx_buffer) *
+ ring_count);
+}
+
+/**
+ * atl1e_clean_rx_ring - Free rx-reservation skbs
+ * @adapter: board private structure
+ */
+static void atl1e_clean_rx_ring(struct atl1e_adapter *adapter)
+{
+ struct atl1e_rx_ring *rx_ring =
+ &adapter->rx_ring;
+ struct atl1e_rx_page_desc *rx_page_desc = rx_ring->rx_page_desc;
+ u16 i, j;
+
+
+ if (adapter->ring_vir_addr == NULL)
+ return;
+ /* Zero out the descriptor ring */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) {
+ if (rx_page_desc[i].rx_page[j].addr != NULL) {
+ memset(rx_page_desc[i].rx_page[j].addr, 0,
+ rx_ring->real_page_size);
+ }
+ }
+ }
+}
+
+static void atl1e_cal_ring_size(struct atl1e_adapter *adapter, u32 *ring_size)
+{
+ *ring_size = ((u32)(adapter->tx_ring.count *
+ sizeof(struct atl1e_tpd_desc) + 7
+ /* tx ring, qword align */
+ + adapter->rx_ring.real_page_size * AT_PAGE_NUM_PER_QUEUE *
+ adapter->num_rx_queues + 31
+ /* rx ring, 32 bytes align */
+ + (1 + AT_PAGE_NUM_PER_QUEUE * adapter->num_rx_queues) *
+ sizeof(u32) + 3));
+ /* tx, rx cmd, dword align */
+}
+
+static void atl1e_init_ring_resources(struct atl1e_adapter *adapter)
+{
+ struct atl1e_rx_ring *rx_ring = NULL;
+
+ rx_ring = &adapter->rx_ring;
+
+ rx_ring->real_page_size = adapter->rx_ring.page_size
+ + adapter->hw.max_frame_size
+ + ETH_HLEN + VLAN_HLEN
+ + ETH_FCS_LEN;
+ rx_ring->real_page_size = roundup(rx_ring->real_page_size, 32);
+ atl1e_cal_ring_size(adapter, &adapter->ring_size);
+
+ adapter->ring_vir_addr = NULL;
+ adapter->rx_ring.desc = NULL;
+ rwlock_init(&adapter->tx_ring.tx_lock);
+}
+
+/*
+ * Read / Write Ptr Initialize:
+ */
+static void atl1e_init_ring_ptrs(struct atl1e_adapter *adapter)
+{
+ struct atl1e_tx_ring *tx_ring = NULL;
+ struct atl1e_rx_ring *rx_ring = NULL;
+ struct atl1e_rx_page_desc *rx_page_desc = NULL;
+ int i, j;
+
+ tx_ring = &adapter->tx_ring;
+ rx_ring = &adapter->rx_ring;
+ rx_page_desc = rx_ring->rx_page_desc;
+
+ tx_ring->next_to_use = 0;
+ atomic_set(&tx_ring->next_to_clean, 0);
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ rx_page_desc[i].rx_using = 0;
+ rx_page_desc[i].rx_nxseq = 0;
+ for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) {
+ *rx_page_desc[i].rx_page[j].write_offset_addr = 0;
+ rx_page_desc[i].rx_page[j].read_offset = 0;
+ }
+ }
+}
+
+/**
+ * atl1e_free_ring_resources - Free Tx / RX descriptor Resources
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ */
+static void atl1e_free_ring_resources(struct atl1e_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ atl1e_clean_tx_ring(adapter);
+ atl1e_clean_rx_ring(adapter);
+
+ if (adapter->ring_vir_addr) {
+ dma_free_coherent(&pdev->dev, adapter->ring_size,
+ adapter->ring_vir_addr, adapter->ring_dma);
+ adapter->ring_vir_addr = NULL;
+ }
+
+ if (adapter->tx_ring.tx_buffer) {
+ kfree(adapter->tx_ring.tx_buffer);
+ adapter->tx_ring.tx_buffer = NULL;
+ }
+}
+
+/**
+ * atl1e_setup_ring_resources - allocate Tx / RX descriptor resources
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ */
+static int atl1e_setup_ring_resources(struct atl1e_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct atl1e_tx_ring *tx_ring;
+ struct atl1e_rx_ring *rx_ring;
+ struct atl1e_rx_page_desc *rx_page_desc;
+ int size, i, j;
+ u32 offset = 0;
+ int err = 0;
+
+ if (adapter->ring_vir_addr != NULL)
+ return 0; /* alloced already */
+
+ tx_ring = &adapter->tx_ring;
+ rx_ring = &adapter->rx_ring;
+
+ /* real ring DMA buffer */
+
+ size = adapter->ring_size;
+ adapter->ring_vir_addr = dma_alloc_coherent(&pdev->dev,
+ adapter->ring_size,
+ &adapter->ring_dma, GFP_KERNEL);
+ if (adapter->ring_vir_addr == NULL) {
+ netdev_err(adapter->netdev,
+ "dma_alloc_coherent failed, size = D%d\n", size);
+ return -ENOMEM;
+ }
+
+ rx_page_desc = rx_ring->rx_page_desc;
+
+ /* Init TPD Ring */
+ tx_ring->dma = roundup(adapter->ring_dma, 8);
+ offset = tx_ring->dma - adapter->ring_dma;
+ tx_ring->desc = adapter->ring_vir_addr + offset;
+ size = sizeof(struct atl1e_tx_buffer) * (tx_ring->count);
+ tx_ring->tx_buffer = kzalloc(size, GFP_KERNEL);
+ if (tx_ring->tx_buffer == NULL) {
+ err = -ENOMEM;
+ goto failed;
+ }
+
+ /* Init RXF-Pages */
+ offset += (sizeof(struct atl1e_tpd_desc) * tx_ring->count);
+ offset = roundup(offset, 32);
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) {
+ rx_page_desc[i].rx_page[j].dma =
+ adapter->ring_dma + offset;
+ rx_page_desc[i].rx_page[j].addr =
+ adapter->ring_vir_addr + offset;
+ offset += rx_ring->real_page_size;
+ }
+ }
+
+ /* Init CMB dma address */
+ tx_ring->cmb_dma = adapter->ring_dma + offset;
+ tx_ring->cmb = adapter->ring_vir_addr + offset;
+ offset += sizeof(u32);
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) {
+ rx_page_desc[i].rx_page[j].write_offset_dma =
+ adapter->ring_dma + offset;
+ rx_page_desc[i].rx_page[j].write_offset_addr =
+ adapter->ring_vir_addr + offset;
+ offset += sizeof(u32);
+ }
+ }
+
+ if (unlikely(offset > adapter->ring_size)) {
+ netdev_err(adapter->netdev, "offset(%d) > ring size(%d) !!\n",
+ offset, adapter->ring_size);
+ err = -1;
+ goto free_buffer;
+ }
+
+ return 0;
+free_buffer:
+ kfree(tx_ring->tx_buffer);
+ tx_ring->tx_buffer = NULL;
+failed:
+ if (adapter->ring_vir_addr != NULL) {
+ dma_free_coherent(&pdev->dev, adapter->ring_size,
+ adapter->ring_vir_addr, adapter->ring_dma);
+ adapter->ring_vir_addr = NULL;
+ }
+ return err;
+}
+
+static inline void atl1e_configure_des_ring(struct atl1e_adapter *adapter)
+{
+
+ struct atl1e_hw *hw = &adapter->hw;
+ struct atl1e_rx_ring *rx_ring = &adapter->rx_ring;
+ struct atl1e_tx_ring *tx_ring = &adapter->tx_ring;
+ struct atl1e_rx_page_desc *rx_page_desc = NULL;
+ int i, j;
+
+ AT_WRITE_REG(hw, REG_DESC_BASE_ADDR_HI,
+ (u32)((adapter->ring_dma & AT_DMA_HI_ADDR_MASK) >> 32));
+ AT_WRITE_REG(hw, REG_TPD_BASE_ADDR_LO,
+ (u32)((tx_ring->dma) & AT_DMA_LO_ADDR_MASK));
+ AT_WRITE_REG(hw, REG_TPD_RING_SIZE, (u16)(tx_ring->count));
+ AT_WRITE_REG(hw, REG_HOST_TX_CMB_LO,
+ (u32)((tx_ring->cmb_dma) & AT_DMA_LO_ADDR_MASK));
+
+ rx_page_desc = rx_ring->rx_page_desc;
+ /* RXF Page Physical address / Page Length */
+ for (i = 0; i < AT_MAX_RECEIVE_QUEUE; i++) {
+ AT_WRITE_REG(hw, atl1e_rx_page_hi_addr_regs[i],
+ (u32)((adapter->ring_dma &
+ AT_DMA_HI_ADDR_MASK) >> 32));
+ for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) {
+ u32 page_phy_addr;
+ u32 offset_phy_addr;
+
+ page_phy_addr = rx_page_desc[i].rx_page[j].dma;
+ offset_phy_addr =
+ rx_page_desc[i].rx_page[j].write_offset_dma;
+
+ AT_WRITE_REG(hw, atl1e_rx_page_lo_addr_regs[i][j],
+ page_phy_addr & AT_DMA_LO_ADDR_MASK);
+ AT_WRITE_REG(hw, atl1e_rx_page_write_offset_regs[i][j],
+ offset_phy_addr & AT_DMA_LO_ADDR_MASK);
+ AT_WRITE_REGB(hw, atl1e_rx_page_vld_regs[i][j], 1);
+ }
+ }
+ /* Page Length */
+ AT_WRITE_REG(hw, REG_HOST_RXFPAGE_SIZE, rx_ring->page_size);
+ /* Load all of base address above */
+ AT_WRITE_REG(hw, REG_LOAD_PTR, 1);
+}
+
+static inline void atl1e_configure_tx(struct atl1e_adapter *adapter)
+{
+ struct atl1e_hw *hw = &adapter->hw;
+ u32 dev_ctrl_data = 0;
+ u32 max_pay_load = 0;
+ u32 jumbo_thresh = 0;
+ u32 extra_size = 0; /* Jumbo frame threshold in QWORD unit */
+
+ /* configure TXQ param */
+ if (hw->nic_type != athr_l2e_revB) {
+ extra_size = ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN;
+ if (hw->max_frame_size <= 1500) {
+ jumbo_thresh = hw->max_frame_size + extra_size;
+ } else if (hw->max_frame_size < 6*1024) {
+ jumbo_thresh =
+ (hw->max_frame_size + extra_size) * 2 / 3;
+ } else {
+ jumbo_thresh = (hw->max_frame_size + extra_size) / 2;
+ }
+ AT_WRITE_REG(hw, REG_TX_EARLY_TH, (jumbo_thresh + 7) >> 3);
+ }
+
+ dev_ctrl_data = AT_READ_REG(hw, REG_DEVICE_CTRL);
+
+ max_pay_load = ((dev_ctrl_data >> DEVICE_CTRL_MAX_PAYLOAD_SHIFT)) &
+ DEVICE_CTRL_MAX_PAYLOAD_MASK;
+
+ hw->dmaw_block = min_t(u32, max_pay_load, hw->dmaw_block);
+
+ max_pay_load = ((dev_ctrl_data >> DEVICE_CTRL_MAX_RREQ_SZ_SHIFT)) &
+ DEVICE_CTRL_MAX_RREQ_SZ_MASK;
+ hw->dmar_block = min_t(u32, max_pay_load, hw->dmar_block);
+
+ if (hw->nic_type != athr_l2e_revB)
+ AT_WRITE_REGW(hw, REG_TXQ_CTRL + 2,
+ atl1e_pay_load_size[hw->dmar_block]);
+ /* enable TXQ */
+ AT_WRITE_REGW(hw, REG_TXQ_CTRL,
+ (((u16)hw->tpd_burst & TXQ_CTRL_NUM_TPD_BURST_MASK)
+ << TXQ_CTRL_NUM_TPD_BURST_SHIFT)
+ | TXQ_CTRL_ENH_MODE | TXQ_CTRL_EN);
+}
+
+static inline void atl1e_configure_rx(struct atl1e_adapter *adapter)
+{
+ struct atl1e_hw *hw = &adapter->hw;
+ u32 rxf_len = 0;
+ u32 rxf_low = 0;
+ u32 rxf_high = 0;
+ u32 rxf_thresh_data = 0;
+ u32 rxq_ctrl_data = 0;
+
+ if (hw->nic_type != athr_l2e_revB) {
+ AT_WRITE_REGW(hw, REG_RXQ_JMBOSZ_RRDTIM,
+ (u16)((hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) <<
+ RXQ_JMBOSZ_TH_SHIFT |
+ (1 & RXQ_JMBO_LKAH_MASK) <<
+ RXQ_JMBO_LKAH_SHIFT));
+
+ rxf_len = AT_READ_REG(hw, REG_SRAM_RXF_LEN);
+ rxf_high = rxf_len * 4 / 5;
+ rxf_low = rxf_len / 5;
+ rxf_thresh_data = ((rxf_high & RXQ_RXF_PAUSE_TH_HI_MASK)
+ << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
+ ((rxf_low & RXQ_RXF_PAUSE_TH_LO_MASK)
+ << RXQ_RXF_PAUSE_TH_LO_SHIFT);
+
+ AT_WRITE_REG(hw, REG_RXQ_RXF_PAUSE_THRESH, rxf_thresh_data);
+ }
+
+ /* RRS */
+ AT_WRITE_REG(hw, REG_IDT_TABLE, hw->indirect_tab);
+ AT_WRITE_REG(hw, REG_BASE_CPU_NUMBER, hw->base_cpu);
+
+ if (hw->rrs_type & atl1e_rrs_ipv4)
+ rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV4;
+
+ if (hw->rrs_type & atl1e_rrs_ipv4_tcp)
+ rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV4_TCP;
+
+ if (hw->rrs_type & atl1e_rrs_ipv6)
+ rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV6;
+
+ if (hw->rrs_type & atl1e_rrs_ipv6_tcp)
+ rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV6_TCP;
+
+ if (hw->rrs_type != atl1e_rrs_disable)
+ rxq_ctrl_data |=
+ (RXQ_CTRL_HASH_ENABLE | RXQ_CTRL_RSS_MODE_MQUESINT);
+
+ rxq_ctrl_data |= RXQ_CTRL_IPV6_XSUM_VERIFY_EN | RXQ_CTRL_PBA_ALIGN_32 |
+ RXQ_CTRL_CUT_THRU_EN | RXQ_CTRL_EN;
+
+ AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq_ctrl_data);
+}
+
+static inline void atl1e_configure_dma(struct atl1e_adapter *adapter)
+{
+ struct atl1e_hw *hw = &adapter->hw;
+ u32 dma_ctrl_data = 0;
+
+ dma_ctrl_data = DMA_CTRL_RXCMB_EN;
+ dma_ctrl_data |= (((u32)hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK)
+ << DMA_CTRL_DMAR_BURST_LEN_SHIFT;
+ dma_ctrl_data |= (((u32)hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK)
+ << DMA_CTRL_DMAW_BURST_LEN_SHIFT;
+ dma_ctrl_data |= DMA_CTRL_DMAR_REQ_PRI | DMA_CTRL_DMAR_OUT_ORDER;
+ dma_ctrl_data |= (((u32)hw->dmar_dly_cnt) & DMA_CTRL_DMAR_DLY_CNT_MASK)
+ << DMA_CTRL_DMAR_DLY_CNT_SHIFT;
+ dma_ctrl_data |= (((u32)hw->dmaw_dly_cnt) & DMA_CTRL_DMAW_DLY_CNT_MASK)
+ << DMA_CTRL_DMAW_DLY_CNT_SHIFT;
+
+ AT_WRITE_REG(hw, REG_DMA_CTRL, dma_ctrl_data);
+}
+
+static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter)
+{
+ u32 value;
+ struct atl1e_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+
+ /* Config MAC CTRL Register */
+ value = MAC_CTRL_TX_EN |
+ MAC_CTRL_RX_EN ;
+
+ if (FULL_DUPLEX == adapter->link_duplex)
+ value |= MAC_CTRL_DUPLX;
+
+ value |= ((u32)((SPEED_1000 == adapter->link_speed) ?
+ MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) <<
+ MAC_CTRL_SPEED_SHIFT);
+ value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
+
+ value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
+ value |= (((u32)adapter->hw.preamble_len &
+ MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
+
+ __atl1e_vlan_mode(netdev->features, &value);
+
+ value |= MAC_CTRL_BC_EN;
+ if (netdev->flags & IFF_PROMISC)
+ value |= MAC_CTRL_PROMIS_EN;
+ if (netdev->flags & IFF_ALLMULTI)
+ value |= MAC_CTRL_MC_ALL_EN;
+ if (netdev->features & NETIF_F_RXALL)
+ value |= MAC_CTRL_DBG;
+ AT_WRITE_REG(hw, REG_MAC_CTRL, value);
+}
+
+/**
+ * atl1e_configure - Configure Transmit&Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx /Rx unit of the MAC after a reset.
+ */
+static int atl1e_configure(struct atl1e_adapter *adapter)
+{
+ struct atl1e_hw *hw = &adapter->hw;
+
+ u32 intr_status_data = 0;
+
+ /* clear interrupt status */
+ AT_WRITE_REG(hw, REG_ISR, ~0);
+
+ /* 1. set MAC Address */
+ atl1e_hw_set_mac_addr(hw);
+
+ /* 2. Init the Multicast HASH table done by set_muti */
+
+ /* 3. Clear any WOL status */
+ AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
+
+ /* 4. Descripter Ring BaseMem/Length/Read ptr/Write ptr
+ * TPD Ring/SMB/RXF0 Page CMBs, they use the same
+ * High 32bits memory */
+ atl1e_configure_des_ring(adapter);
+
+ /* 5. set Interrupt Moderator Timer */
+ AT_WRITE_REGW(hw, REG_IRQ_MODU_TIMER_INIT, hw->imt);
+ AT_WRITE_REGW(hw, REG_IRQ_MODU_TIMER2_INIT, hw->imt);
+ AT_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_LED_MODE |
+ MASTER_CTRL_ITIMER_EN | MASTER_CTRL_ITIMER2_EN);
+
+ /* 6. rx/tx threshold to trig interrupt */
+ AT_WRITE_REGW(hw, REG_TRIG_RRD_THRESH, hw->rrd_thresh);
+ AT_WRITE_REGW(hw, REG_TRIG_TPD_THRESH, hw->tpd_thresh);
+ AT_WRITE_REGW(hw, REG_TRIG_RXTIMER, hw->rx_count_down);
+ AT_WRITE_REGW(hw, REG_TRIG_TXTIMER, hw->tx_count_down);
+
+ /* 7. set Interrupt Clear Timer */
+ AT_WRITE_REGW(hw, REG_CMBDISDMA_TIMER, hw->ict);
+
+ /* 8. set MTU */
+ AT_WRITE_REG(hw, REG_MTU, hw->max_frame_size + ETH_HLEN +
+ VLAN_HLEN + ETH_FCS_LEN);
+
+ /* 9. config TXQ early tx threshold */
+ atl1e_configure_tx(adapter);
+
+ /* 10. config RXQ */
+ atl1e_configure_rx(adapter);
+
+ /* 11. config DMA Engine */
+ atl1e_configure_dma(adapter);
+
+ /* 12. smb timer to trig interrupt */
+ AT_WRITE_REG(hw, REG_SMB_STAT_TIMER, hw->smb_timer);
+
+ intr_status_data = AT_READ_REG(hw, REG_ISR);
+ if (unlikely((intr_status_data & ISR_PHY_LINKDOWN) != 0)) {
+ netdev_err(adapter->netdev,
+ "atl1e_configure failed, PCIE phy link down\n");
+ return -1;
+ }
+
+ AT_WRITE_REG(hw, REG_ISR, 0x7fffffff);
+ return 0;
+}
+
+/**
+ * atl1e_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ */
+static struct net_device_stats *atl1e_get_stats(struct net_device *netdev)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ struct atl1e_hw_stats *hw_stats = &adapter->hw_stats;
+ struct net_device_stats *net_stats = &netdev->stats;
+
+ net_stats->rx_bytes = hw_stats->rx_byte_cnt;
+ net_stats->tx_bytes = hw_stats->tx_byte_cnt;
+ net_stats->multicast = hw_stats->rx_mcast;
+ net_stats->collisions = hw_stats->tx_1_col +
+ hw_stats->tx_2_col +
+ hw_stats->tx_late_col +
+ hw_stats->tx_abort_col;
+
+ net_stats->rx_errors = hw_stats->rx_frag +
+ hw_stats->rx_fcs_err +
+ hw_stats->rx_len_err +
+ hw_stats->rx_sz_ov +
+ hw_stats->rx_rrd_ov +
+ hw_stats->rx_align_err +
+ hw_stats->rx_rxf_ov;
+
+ net_stats->rx_fifo_errors = hw_stats->rx_rxf_ov;
+ net_stats->rx_length_errors = hw_stats->rx_len_err;
+ net_stats->rx_crc_errors = hw_stats->rx_fcs_err;
+ net_stats->rx_frame_errors = hw_stats->rx_align_err;
+ net_stats->rx_dropped = hw_stats->rx_rrd_ov;
+
+ net_stats->tx_errors = hw_stats->tx_late_col +
+ hw_stats->tx_abort_col +
+ hw_stats->tx_underrun +
+ hw_stats->tx_trunc;
+
+ net_stats->tx_fifo_errors = hw_stats->tx_underrun;
+ net_stats->tx_aborted_errors = hw_stats->tx_abort_col;
+ net_stats->tx_window_errors = hw_stats->tx_late_col;
+
+ net_stats->rx_packets = hw_stats->rx_ok + net_stats->rx_errors;
+ net_stats->tx_packets = hw_stats->tx_ok + net_stats->tx_errors;
+
+ return net_stats;
+}
+
+static void atl1e_update_hw_stats(struct atl1e_adapter *adapter)
+{
+ u16 hw_reg_addr = 0;
+ unsigned long *stats_item = NULL;
+
+ /* update rx status */
+ hw_reg_addr = REG_MAC_RX_STATUS_BIN;
+ stats_item = &adapter->hw_stats.rx_ok;
+ while (hw_reg_addr <= REG_MAC_RX_STATUS_END) {
+ *stats_item += AT_READ_REG(&adapter->hw, hw_reg_addr);
+ stats_item++;
+ hw_reg_addr += 4;
+ }
+ /* update tx status */
+ hw_reg_addr = REG_MAC_TX_STATUS_BIN;
+ stats_item = &adapter->hw_stats.tx_ok;
+ while (hw_reg_addr <= REG_MAC_TX_STATUS_END) {
+ *stats_item += AT_READ_REG(&adapter->hw, hw_reg_addr);
+ stats_item++;
+ hw_reg_addr += 4;
+ }
+}
+
+static inline void atl1e_clear_phy_int(struct atl1e_adapter *adapter)
+{
+ u16 phy_data;
+
+ spin_lock(&adapter->mdio_lock);
+ atl1e_read_phy_reg(&adapter->hw, MII_INT_STATUS, &phy_data);
+ spin_unlock(&adapter->mdio_lock);
+}
+
+static bool atl1e_clean_tx_irq(struct atl1e_adapter *adapter)
+{
+ struct atl1e_tx_ring *tx_ring = &adapter->tx_ring;
+ struct atl1e_tx_buffer *tx_buffer = NULL;
+ u16 hw_next_to_clean = AT_READ_REGW(&adapter->hw, REG_TPD_CONS_IDX);
+ u16 next_to_clean = atomic_read(&tx_ring->next_to_clean);
+
+ while (next_to_clean != hw_next_to_clean) {
+ tx_buffer = &tx_ring->tx_buffer[next_to_clean];
+ if (tx_buffer->dma) {
+ if (tx_buffer->flags & ATL1E_TX_PCIMAP_SINGLE)
+ dma_unmap_single(&adapter->pdev->dev,
+ tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
+ else if (tx_buffer->flags & ATL1E_TX_PCIMAP_PAGE)
+ dma_unmap_page(&adapter->pdev->dev,
+ tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
+ tx_buffer->dma = 0;
+ }
+
+ if (tx_buffer->skb) {
+ dev_consume_skb_irq(tx_buffer->skb);
+ tx_buffer->skb = NULL;
+ }
+
+ if (++next_to_clean == tx_ring->count)
+ next_to_clean = 0;
+ }
+
+ atomic_set(&tx_ring->next_to_clean, next_to_clean);
+
+ if (netif_queue_stopped(adapter->netdev) &&
+ netif_carrier_ok(adapter->netdev)) {
+ netif_wake_queue(adapter->netdev);
+ }
+
+ return true;
+}
+
+/**
+ * atl1e_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ */
+static irqreturn_t atl1e_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ struct atl1e_hw *hw = &adapter->hw;
+ int max_ints = AT_MAX_INT_WORK;
+ int handled = IRQ_NONE;
+ u32 status;
+
+ do {
+ status = AT_READ_REG(hw, REG_ISR);
+ if ((status & IMR_NORMAL_MASK) == 0 ||
+ (status & ISR_DIS_INT) != 0) {
+ if (max_ints != AT_MAX_INT_WORK)
+ handled = IRQ_HANDLED;
+ break;
+ }
+ /* link event */
+ if (status & ISR_GPHY)
+ atl1e_clear_phy_int(adapter);
+ /* Ack ISR */
+ AT_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT);
+
+ handled = IRQ_HANDLED;
+ /* check if PCIE PHY Link down */
+ if (status & ISR_PHY_LINKDOWN) {
+ netdev_err(adapter->netdev,
+ "pcie phy linkdown %x\n", status);
+ if (netif_running(adapter->netdev)) {
+ /* reset MAC */
+ atl1e_irq_reset(adapter);
+ schedule_work(&adapter->reset_task);
+ break;
+ }
+ }
+
+ /* check if DMA read/write error */
+ if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
+ netdev_err(adapter->netdev,
+ "PCIE DMA RW error (status = 0x%x)\n",
+ status);
+ atl1e_irq_reset(adapter);
+ schedule_work(&adapter->reset_task);
+ break;
+ }
+
+ if (status & ISR_SMB)
+ atl1e_update_hw_stats(adapter);
+
+ /* link event */
+ if (status & (ISR_GPHY | ISR_MANUAL)) {
+ netdev->stats.tx_carrier_errors++;
+ atl1e_link_chg_event(adapter);
+ break;
+ }
+
+ /* transmit event */
+ if (status & ISR_TX_EVENT)
+ atl1e_clean_tx_irq(adapter);
+
+ if (status & ISR_RX_EVENT) {
+ /*
+ * disable rx interrupts, without
+ * the synchronize_irq bit
+ */
+ AT_WRITE_REG(hw, REG_IMR,
+ IMR_NORMAL_MASK & ~ISR_RX_EVENT);
+ AT_WRITE_FLUSH(hw);
+ if (likely(napi_schedule_prep(
+ &adapter->napi)))
+ __napi_schedule(&adapter->napi);
+ }
+ } while (--max_ints > 0);
+ /* re-enable Interrupt*/
+ AT_WRITE_REG(&adapter->hw, REG_ISR, 0);
+
+ return handled;
+}
+
+static inline void atl1e_rx_checksum(struct atl1e_adapter *adapter,
+ struct sk_buff *skb, struct atl1e_recv_ret_status *prrs)
+{
+ u8 *packet = (u8 *)(prrs + 1);
+ struct iphdr *iph;
+ u16 head_len = ETH_HLEN;
+ u16 pkt_flags;
+ u16 err_flags;
+
+ skb_checksum_none_assert(skb);
+ pkt_flags = prrs->pkt_flag;
+ err_flags = prrs->err_flag;
+ if (((pkt_flags & RRS_IS_IPV4) || (pkt_flags & RRS_IS_IPV6)) &&
+ ((pkt_flags & RRS_IS_TCP) || (pkt_flags & RRS_IS_UDP))) {
+ if (pkt_flags & RRS_IS_IPV4) {
+ if (pkt_flags & RRS_IS_802_3)
+ head_len += 8;
+ iph = (struct iphdr *) (packet + head_len);
+ if (iph->frag_off != 0 && !(pkt_flags & RRS_IS_IP_DF))
+ goto hw_xsum;
+ }
+ if (!(err_flags & (RRS_ERR_IP_CSUM | RRS_ERR_L4_CSUM))) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ return;
+ }
+ }
+
+hw_xsum :
+ return;
+}
+
+static struct atl1e_rx_page *atl1e_get_rx_page(struct atl1e_adapter *adapter,
+ u8 que)
+{
+ struct atl1e_rx_page_desc *rx_page_desc =
+ (struct atl1e_rx_page_desc *) adapter->rx_ring.rx_page_desc;
+ u8 rx_using = rx_page_desc[que].rx_using;
+
+ return &(rx_page_desc[que].rx_page[rx_using]);
+}
+
+static void atl1e_clean_rx_irq(struct atl1e_adapter *adapter, u8 que,
+ int *work_done, int work_to_do)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct atl1e_rx_ring *rx_ring = &adapter->rx_ring;
+ struct atl1e_rx_page_desc *rx_page_desc =
+ (struct atl1e_rx_page_desc *) rx_ring->rx_page_desc;
+ struct sk_buff *skb = NULL;
+ struct atl1e_rx_page *rx_page = atl1e_get_rx_page(adapter, que);
+ u32 packet_size, write_offset;
+ struct atl1e_recv_ret_status *prrs;
+
+ write_offset = *(rx_page->write_offset_addr);
+ if (likely(rx_page->read_offset < write_offset)) {
+ do {
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+ /* get new packet's rrs */
+ prrs = (struct atl1e_recv_ret_status *) (rx_page->addr +
+ rx_page->read_offset);
+ /* check sequence number */
+ if (prrs->seq_num != rx_page_desc[que].rx_nxseq) {
+ netdev_err(netdev,
+ "rx sequence number error (rx=%d) (expect=%d)\n",
+ prrs->seq_num,
+ rx_page_desc[que].rx_nxseq);
+ rx_page_desc[que].rx_nxseq++;
+ /* just for debug use */
+ AT_WRITE_REG(&adapter->hw, REG_DEBUG_DATA0,
+ (((u32)prrs->seq_num) << 16) |
+ rx_page_desc[que].rx_nxseq);
+ goto fatal_err;
+ }
+ rx_page_desc[que].rx_nxseq++;
+
+ /* error packet */
+ if ((prrs->pkt_flag & RRS_IS_ERR_FRAME) &&
+ !(netdev->features & NETIF_F_RXALL)) {
+ if (prrs->err_flag & (RRS_ERR_BAD_CRC |
+ RRS_ERR_DRIBBLE | RRS_ERR_CODE |
+ RRS_ERR_TRUNC)) {
+ /* hardware error, discard this packet*/
+ netdev_err(netdev,
+ "rx packet desc error %x\n",
+ *((u32 *)prrs + 1));
+ goto skip_pkt;
+ }
+ }
+
+ packet_size = ((prrs->word1 >> RRS_PKT_SIZE_SHIFT) &
+ RRS_PKT_SIZE_MASK);
+ if (likely(!(netdev->features & NETIF_F_RXFCS)))
+ packet_size -= 4; /* CRC */
+
+ skb = netdev_alloc_skb_ip_align(netdev, packet_size);
+ if (skb == NULL)
+ goto skip_pkt;
+
+ memcpy(skb->data, (u8 *)(prrs + 1), packet_size);
+ skb_put(skb, packet_size);
+ skb->protocol = eth_type_trans(skb, netdev);
+ atl1e_rx_checksum(adapter, skb, prrs);
+
+ if (prrs->pkt_flag & RRS_IS_VLAN_TAG) {
+ u16 vlan_tag = (prrs->vtag >> 4) |
+ ((prrs->vtag & 7) << 13) |
+ ((prrs->vtag & 8) << 9);
+ netdev_dbg(netdev,
+ "RXD VLAN TAG<RRD>=0x%04x\n",
+ prrs->vtag);
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
+ }
+ napi_gro_receive(&adapter->napi, skb);
+
+skip_pkt:
+ /* skip current packet whether it's ok or not. */
+ rx_page->read_offset +=
+ (((u32)((prrs->word1 >> RRS_PKT_SIZE_SHIFT) &
+ RRS_PKT_SIZE_MASK) +
+ sizeof(struct atl1e_recv_ret_status) + 31) &
+ 0xFFFFFFE0);
+
+ if (rx_page->read_offset >= rx_ring->page_size) {
+ /* mark this page clean */
+ u16 reg_addr;
+ u8 rx_using;
+
+ rx_page->read_offset =
+ *(rx_page->write_offset_addr) = 0;
+ rx_using = rx_page_desc[que].rx_using;
+ reg_addr =
+ atl1e_rx_page_vld_regs[que][rx_using];
+ AT_WRITE_REGB(&adapter->hw, reg_addr, 1);
+ rx_page_desc[que].rx_using ^= 1;
+ rx_page = atl1e_get_rx_page(adapter, que);
+ }
+ write_offset = *(rx_page->write_offset_addr);
+ } while (rx_page->read_offset < write_offset);
+ }
+
+ return;
+
+fatal_err:
+ if (!test_bit(__AT_DOWN, &adapter->flags))
+ schedule_work(&adapter->reset_task);
+}
+
+/**
+ * atl1e_clean - NAPI Rx polling callback
+ * @napi: napi info
+ * @budget: number of packets to clean
+ */
+static int atl1e_clean(struct napi_struct *napi, int budget)
+{
+ struct atl1e_adapter *adapter =
+ container_of(napi, struct atl1e_adapter, napi);
+ u32 imr_data;
+ int work_done = 0;
+
+ /* Keep link state information with original netdev */
+ if (!netif_carrier_ok(adapter->netdev))
+ goto quit_polling;
+
+ atl1e_clean_rx_irq(adapter, 0, &work_done, budget);
+
+ /* If no Tx and not enough Rx work done, exit the polling mode */
+ if (work_done < budget) {
+quit_polling:
+ napi_complete_done(napi, work_done);
+ imr_data = AT_READ_REG(&adapter->hw, REG_IMR);
+ AT_WRITE_REG(&adapter->hw, REG_IMR, imr_data | ISR_RX_EVENT);
+ /* test debug */
+ if (test_bit(__AT_DOWN, &adapter->flags)) {
+ atomic_dec(&adapter->irq_sem);
+ netdev_err(adapter->netdev,
+ "atl1e_clean is called when AT_DOWN\n");
+ }
+ /* reenable RX intr */
+ /*atl1e_irq_enable(adapter); */
+
+ }
+ return work_done;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void atl1e_netpoll(struct net_device *netdev)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ disable_irq(adapter->pdev->irq);
+ atl1e_intr(adapter->pdev->irq, netdev);
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+static inline u16 atl1e_tpd_avail(struct atl1e_adapter *adapter)
+{
+ struct atl1e_tx_ring *tx_ring = &adapter->tx_ring;
+ u16 next_to_use = 0;
+ u16 next_to_clean = 0;
+
+ next_to_clean = atomic_read(&tx_ring->next_to_clean);
+ next_to_use = tx_ring->next_to_use;
+
+ return (u16)(next_to_clean > next_to_use) ?
+ (next_to_clean - next_to_use - 1) :
+ (tx_ring->count + next_to_clean - next_to_use - 1);
+}
+
+/*
+ * get next usable tpd
+ * Note: should call atl1e_tdp_avail to make sure
+ * there is enough tpd to use
+ */
+static struct atl1e_tpd_desc *atl1e_get_tpd(struct atl1e_adapter *adapter)
+{
+ struct atl1e_tx_ring *tx_ring = &adapter->tx_ring;
+ u16 next_to_use = 0;
+
+ next_to_use = tx_ring->next_to_use;
+ if (++tx_ring->next_to_use == tx_ring->count)
+ tx_ring->next_to_use = 0;
+
+ memset(&tx_ring->desc[next_to_use], 0, sizeof(struct atl1e_tpd_desc));
+ return &tx_ring->desc[next_to_use];
+}
+
+static struct atl1e_tx_buffer *
+atl1e_get_tx_buffer(struct atl1e_adapter *adapter, struct atl1e_tpd_desc *tpd)
+{
+ struct atl1e_tx_ring *tx_ring = &adapter->tx_ring;
+
+ return &tx_ring->tx_buffer[tpd - tx_ring->desc];
+}
+
+/* Calculate the transmit packet descript needed*/
+static u16 atl1e_cal_tdp_req(const struct sk_buff *skb)
+{
+ int i = 0;
+ u16 tpd_req = 1;
+ u16 fg_size = 0;
+ u16 proto_hdr_len = 0;
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ fg_size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
+ tpd_req += ((fg_size + MAX_TX_BUF_LEN - 1) >> MAX_TX_BUF_SHIFT);
+ }
+
+ if (skb_is_gso(skb)) {
+ if (skb->protocol == htons(ETH_P_IP) ||
+ (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6)) {
+ proto_hdr_len = skb_tcp_all_headers(skb);
+ if (proto_hdr_len < skb_headlen(skb)) {
+ tpd_req += ((skb_headlen(skb) - proto_hdr_len +
+ MAX_TX_BUF_LEN - 1) >>
+ MAX_TX_BUF_SHIFT);
+ }
+ }
+
+ }
+ return tpd_req;
+}
+
+static int atl1e_tso_csum(struct atl1e_adapter *adapter,
+ struct sk_buff *skb, struct atl1e_tpd_desc *tpd)
+{
+ unsigned short offload_type;
+ u8 hdr_len;
+ u32 real_len;
+
+ if (skb_is_gso(skb)) {
+ int err;
+
+ err = skb_cow_head(skb, 0);
+ if (err < 0)
+ return err;
+
+ offload_type = skb_shinfo(skb)->gso_type;
+
+ if (offload_type & SKB_GSO_TCPV4) {
+ real_len = (((unsigned char *)ip_hdr(skb) - skb->data)
+ + ntohs(ip_hdr(skb)->tot_len));
+
+ if (real_len < skb->len) {
+ err = pskb_trim(skb, real_len);
+ if (err)
+ return err;
+ }
+
+ hdr_len = skb_tcp_all_headers(skb);
+ if (unlikely(skb->len == hdr_len)) {
+ /* only xsum need */
+ netdev_warn(adapter->netdev,
+ "IPV4 tso with zero data??\n");
+ goto check_sum;
+ } else {
+ ip_hdr(skb)->check = 0;
+ ip_hdr(skb)->tot_len = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(
+ ip_hdr(skb)->saddr,
+ ip_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ tpd->word3 |= (ip_hdr(skb)->ihl &
+ TDP_V4_IPHL_MASK) <<
+ TPD_V4_IPHL_SHIFT;
+ tpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
+ TPD_TCPHDRLEN_MASK) <<
+ TPD_TCPHDRLEN_SHIFT;
+ tpd->word3 |= ((skb_shinfo(skb)->gso_size) &
+ TPD_MSS_MASK) << TPD_MSS_SHIFT;
+ tpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT;
+ }
+ return 0;
+ }
+ }
+
+check_sum:
+ if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
+ u8 css, cso;
+
+ cso = skb_checksum_start_offset(skb);
+ if (unlikely(cso & 0x1)) {
+ netdev_err(adapter->netdev,
+ "payload offset should not ant event number\n");
+ return -1;
+ } else {
+ css = cso + skb->csum_offset;
+ tpd->word3 |= (cso & TPD_PLOADOFFSET_MASK) <<
+ TPD_PLOADOFFSET_SHIFT;
+ tpd->word3 |= (css & TPD_CCSUMOFFSET_MASK) <<
+ TPD_CCSUMOFFSET_SHIFT;
+ tpd->word3 |= 1 << TPD_CC_SEGMENT_EN_SHIFT;
+ }
+ }
+
+ return 0;
+}
+
+static int atl1e_tx_map(struct atl1e_adapter *adapter,
+ struct sk_buff *skb, struct atl1e_tpd_desc *tpd)
+{
+ struct atl1e_tpd_desc *use_tpd = NULL;
+ struct atl1e_tx_buffer *tx_buffer = NULL;
+ u16 buf_len = skb_headlen(skb);
+ u16 map_len = 0;
+ u16 mapped_len = 0;
+ u16 hdr_len = 0;
+ u16 nr_frags;
+ u16 f;
+ int segment;
+ int ring_start = adapter->tx_ring.next_to_use;
+ int ring_end;
+
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ segment = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK;
+ if (segment) {
+ /* TSO */
+ hdr_len = skb_tcp_all_headers(skb);
+ map_len = hdr_len;
+ use_tpd = tpd;
+
+ tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd);
+ tx_buffer->length = map_len;
+ tx_buffer->dma = dma_map_single(&adapter->pdev->dev,
+ skb->data, hdr_len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma))
+ return -ENOSPC;
+
+ ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE);
+ mapped_len += map_len;
+ use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
+ use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
+ ((cpu_to_le32(tx_buffer->length) &
+ TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT);
+ }
+
+ while (mapped_len < buf_len) {
+ /* mapped_len == 0, means we should use the first tpd,
+ which is given by caller */
+ if (mapped_len == 0) {
+ use_tpd = tpd;
+ } else {
+ use_tpd = atl1e_get_tpd(adapter);
+ memcpy(use_tpd, tpd, sizeof(struct atl1e_tpd_desc));
+ }
+ tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd);
+ tx_buffer->skb = NULL;
+
+ tx_buffer->length = map_len =
+ ((buf_len - mapped_len) >= MAX_TX_BUF_LEN) ?
+ MAX_TX_BUF_LEN : (buf_len - mapped_len);
+ tx_buffer->dma =
+ dma_map_single(&adapter->pdev->dev,
+ skb->data + mapped_len, map_len,
+ DMA_TO_DEVICE);
+
+ if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) {
+ /* We need to unwind the mappings we've done */
+ ring_end = adapter->tx_ring.next_to_use;
+ adapter->tx_ring.next_to_use = ring_start;
+ while (adapter->tx_ring.next_to_use != ring_end) {
+ tpd = atl1e_get_tpd(adapter);
+ tx_buffer = atl1e_get_tx_buffer(adapter, tpd);
+ dma_unmap_single(&adapter->pdev->dev,
+ tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
+ }
+ /* Reset the tx rings next pointer */
+ adapter->tx_ring.next_to_use = ring_start;
+ return -ENOSPC;
+ }
+
+ ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE);
+ mapped_len += map_len;
+ use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
+ use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
+ ((cpu_to_le32(tx_buffer->length) &
+ TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT);
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ const skb_frag_t *frag = &skb_shinfo(skb)->frags[f];
+ u16 i;
+ u16 seg_num;
+
+ buf_len = skb_frag_size(frag);
+
+ seg_num = (buf_len + MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN;
+ for (i = 0; i < seg_num; i++) {
+ use_tpd = atl1e_get_tpd(adapter);
+ memcpy(use_tpd, tpd, sizeof(struct atl1e_tpd_desc));
+
+ tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd);
+ BUG_ON(tx_buffer->skb);
+
+ tx_buffer->skb = NULL;
+ tx_buffer->length =
+ (buf_len > MAX_TX_BUF_LEN) ?
+ MAX_TX_BUF_LEN : buf_len;
+ buf_len -= tx_buffer->length;
+
+ tx_buffer->dma = skb_frag_dma_map(&adapter->pdev->dev,
+ frag,
+ (i * MAX_TX_BUF_LEN),
+ tx_buffer->length,
+ DMA_TO_DEVICE);
+
+ if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) {
+ /* We need to unwind the mappings we've done */
+ ring_end = adapter->tx_ring.next_to_use;
+ adapter->tx_ring.next_to_use = ring_start;
+ while (adapter->tx_ring.next_to_use != ring_end) {
+ tpd = atl1e_get_tpd(adapter);
+ tx_buffer = atl1e_get_tx_buffer(adapter, tpd);
+ dma_unmap_page(&adapter->pdev->dev, tx_buffer->dma,
+ tx_buffer->length, DMA_TO_DEVICE);
+ }
+
+ /* Reset the ring next to use pointer */
+ adapter->tx_ring.next_to_use = ring_start;
+ return -ENOSPC;
+ }
+
+ ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_PAGE);
+ use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
+ use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
+ ((cpu_to_le32(tx_buffer->length) &
+ TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT);
+ }
+ }
+
+ if ((tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK)
+ /* note this one is a tcp header */
+ tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT;
+ /* The last tpd */
+
+ use_tpd->word3 |= 1 << TPD_EOP_SHIFT;
+ /* The last buffer info contain the skb address,
+ so it will be free after unmap */
+ tx_buffer->skb = skb;
+ return 0;
+}
+
+static void atl1e_tx_queue(struct atl1e_adapter *adapter, u16 count,
+ struct atl1e_tpd_desc *tpd)
+{
+ struct atl1e_tx_ring *tx_ring = &adapter->tx_ring;
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ AT_WRITE_REG(&adapter->hw, REG_MB_TPD_PROD_IDX, tx_ring->next_to_use);
+}
+
+static netdev_tx_t atl1e_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ u16 tpd_req = 1;
+ struct atl1e_tpd_desc *tpd;
+
+ if (test_bit(__AT_DOWN, &adapter->flags)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (unlikely(skb->len <= 0)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ tpd_req = atl1e_cal_tdp_req(skb);
+
+ if (atl1e_tpd_avail(adapter) < tpd_req) {
+ /* no enough descriptor, just stop queue */
+ netif_stop_queue(netdev);
+ return NETDEV_TX_BUSY;
+ }
+
+ tpd = atl1e_get_tpd(adapter);
+
+ if (skb_vlan_tag_present(skb)) {
+ u16 vlan_tag = skb_vlan_tag_get(skb);
+ u16 atl1e_vlan_tag;
+
+ tpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT;
+ AT_VLAN_TAG_TO_TPD_TAG(vlan_tag, atl1e_vlan_tag);
+ tpd->word2 |= (atl1e_vlan_tag & TPD_VLANTAG_MASK) <<
+ TPD_VLAN_SHIFT;
+ }
+
+ if (skb->protocol == htons(ETH_P_8021Q))
+ tpd->word3 |= 1 << TPD_VL_TAGGED_SHIFT;
+
+ if (skb_network_offset(skb) != ETH_HLEN)
+ tpd->word3 |= 1 << TPD_ETHTYPE_SHIFT; /* 802.3 frame */
+
+ /* do TSO and check sum */
+ if (atl1e_tso_csum(adapter, skb, tpd) != 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (atl1e_tx_map(adapter, skb, tpd)) {
+ dev_kfree_skb_any(skb);
+ goto out;
+ }
+
+ atl1e_tx_queue(adapter, tpd_req, tpd);
+out:
+ return NETDEV_TX_OK;
+}
+
+static void atl1e_free_irq(struct atl1e_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ free_irq(adapter->pdev->irq, netdev);
+}
+
+static int atl1e_request_irq(struct atl1e_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct net_device *netdev = adapter->netdev;
+ int err = 0;
+
+ err = request_irq(pdev->irq, atl1e_intr, IRQF_SHARED, netdev->name,
+ netdev);
+ if (err) {
+ netdev_dbg(adapter->netdev,
+ "Unable to allocate interrupt Error: %d\n", err);
+ return err;
+ }
+ netdev_dbg(netdev, "atl1e_request_irq OK\n");
+ return err;
+}
+
+int atl1e_up(struct atl1e_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int err = 0;
+ u32 val;
+
+ /* hardware has been reset, we need to reload some things */
+ err = atl1e_init_hw(&adapter->hw);
+ if (err) {
+ err = -EIO;
+ return err;
+ }
+ atl1e_init_ring_ptrs(adapter);
+ atl1e_set_multi(netdev);
+ atl1e_restore_vlan(adapter);
+
+ if (atl1e_configure(adapter)) {
+ err = -EIO;
+ goto err_up;
+ }
+
+ clear_bit(__AT_DOWN, &adapter->flags);
+ napi_enable(&adapter->napi);
+ atl1e_irq_enable(adapter);
+ val = AT_READ_REG(&adapter->hw, REG_MASTER_CTRL);
+ AT_WRITE_REG(&adapter->hw, REG_MASTER_CTRL,
+ val | MASTER_CTRL_MANUAL_INT);
+
+err_up:
+ return err;
+}
+
+void atl1e_down(struct atl1e_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer */
+ set_bit(__AT_DOWN, &adapter->flags);
+
+ netif_stop_queue(netdev);
+
+ /* reset MAC to disable all RX/TX */
+ atl1e_reset_hw(&adapter->hw);
+ msleep(1);
+
+ napi_disable(&adapter->napi);
+ atl1e_del_timer(adapter);
+ atl1e_irq_disable(adapter);
+
+ netif_carrier_off(netdev);
+ adapter->link_speed = SPEED_0;
+ adapter->link_duplex = -1;
+ atl1e_clean_tx_ring(adapter);
+ atl1e_clean_rx_ring(adapter);
+}
+
+/**
+ * atl1e_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ */
+static int atl1e_open(struct net_device *netdev)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__AT_TESTING, &adapter->flags))
+ return -EBUSY;
+
+ /* allocate rx/tx dma buffer & descriptors */
+ atl1e_init_ring_resources(adapter);
+ err = atl1e_setup_ring_resources(adapter);
+ if (unlikely(err))
+ return err;
+
+ err = atl1e_request_irq(adapter);
+ if (unlikely(err))
+ goto err_req_irq;
+
+ err = atl1e_up(adapter);
+ if (unlikely(err))
+ goto err_up;
+
+ return 0;
+
+err_up:
+ atl1e_free_irq(adapter);
+err_req_irq:
+ atl1e_free_ring_resources(adapter);
+ atl1e_reset_hw(&adapter->hw);
+
+ return err;
+}
+
+/**
+ * atl1e_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ */
+static int atl1e_close(struct net_device *netdev)
+{
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ WARN_ON(test_bit(__AT_RESETTING, &adapter->flags));
+ atl1e_down(adapter);
+ atl1e_free_irq(adapter);
+ atl1e_free_ring_resources(adapter);
+
+ return 0;
+}
+
+static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ struct atl1e_hw *hw = &adapter->hw;
+ u32 ctrl = 0;
+ u32 mac_ctrl_data = 0;
+ u32 wol_ctrl_data = 0;
+ u16 mii_advertise_data = 0;
+ u16 mii_bmsr_data = 0;
+ u16 mii_intr_status_data = 0;
+ u32 wufc = adapter->wol;
+ u32 i;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__AT_RESETTING, &adapter->flags));
+ atl1e_down(adapter);
+ }
+ netif_device_detach(netdev);
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ if (wufc) {
+ /* get link status */
+ atl1e_read_phy_reg(hw, MII_BMSR, &mii_bmsr_data);
+ atl1e_read_phy_reg(hw, MII_BMSR, &mii_bmsr_data);
+
+ mii_advertise_data = ADVERTISE_10HALF;
+
+ if ((atl1e_write_phy_reg(hw, MII_CTRL1000, 0) != 0) ||
+ (atl1e_write_phy_reg(hw,
+ MII_ADVERTISE, mii_advertise_data) != 0) ||
+ (atl1e_phy_commit(hw)) != 0) {
+ netdev_dbg(adapter->netdev, "set phy register failed\n");
+ goto wol_dis;
+ }
+
+ hw->phy_configured = false; /* re-init PHY when resume */
+
+ /* turn on magic packet wol */
+ if (wufc & AT_WUFC_MAG)
+ wol_ctrl_data |= WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
+
+ if (wufc & AT_WUFC_LNKC) {
+ /* if orignal link status is link, just wait for retrive link */
+ if (mii_bmsr_data & BMSR_LSTATUS) {
+ for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) {
+ msleep(100);
+ atl1e_read_phy_reg(hw, MII_BMSR,
+ &mii_bmsr_data);
+ if (mii_bmsr_data & BMSR_LSTATUS)
+ break;
+ }
+
+ if ((mii_bmsr_data & BMSR_LSTATUS) == 0)
+ netdev_dbg(adapter->netdev,
+ "Link may change when suspend\n");
+ }
+ wol_ctrl_data |= WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN;
+ /* only link up can wake up */
+ if (atl1e_write_phy_reg(hw, MII_INT_CTRL, 0x400) != 0) {
+ netdev_dbg(adapter->netdev,
+ "read write phy register failed\n");
+ goto wol_dis;
+ }
+ }
+ /* clear phy interrupt */
+ atl1e_read_phy_reg(hw, MII_INT_STATUS, &mii_intr_status_data);
+ /* Config MAC Ctrl register */
+ mac_ctrl_data = MAC_CTRL_RX_EN;
+ /* set to 10/100M halt duplex */
+ mac_ctrl_data |= MAC_CTRL_SPEED_10_100 << MAC_CTRL_SPEED_SHIFT;
+ mac_ctrl_data |= (((u32)adapter->hw.preamble_len &
+ MAC_CTRL_PRMLEN_MASK) <<
+ MAC_CTRL_PRMLEN_SHIFT);
+
+ __atl1e_vlan_mode(netdev->features, &mac_ctrl_data);
+
+ /* magic packet maybe Broadcast&multicast&Unicast frame */
+ if (wufc & AT_WUFC_MAG)
+ mac_ctrl_data |= MAC_CTRL_BC_EN;
+
+ netdev_dbg(adapter->netdev, "suspend MAC=0x%x\n",
+ mac_ctrl_data);
+
+ AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
+ AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+ /* pcie patch */
+ ctrl = AT_READ_REG(hw, REG_PCIE_PHYMISC);
+ ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+ AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+ goto suspend_exit;
+ }
+wol_dis:
+
+ /* WOL disabled */
+ AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
+
+ /* pcie patch */
+ ctrl = AT_READ_REG(hw, REG_PCIE_PHYMISC);
+ ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+ AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
+
+ atl1e_force_ps(hw);
+ hw->phy_configured = false; /* re-init PHY when resume */
+
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+
+suspend_exit:
+
+ if (netif_running(netdev))
+ atl1e_free_irq(adapter);
+
+ pci_disable_device(pdev);
+
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int atl1e_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+ u32 err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ netdev_err(adapter->netdev,
+ "Cannot enable PCI device from suspend\n");
+ return err;
+ }
+
+ pci_set_master(pdev);
+
+ AT_READ_REG(&adapter->hw, REG_WOL_CTRL); /* clear WOL status */
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
+
+ if (netif_running(netdev)) {
+ err = atl1e_request_irq(adapter);
+ if (err)
+ return err;
+ }
+
+ atl1e_reset_hw(&adapter->hw);
+
+ if (netif_running(netdev))
+ atl1e_up(adapter);
+
+ netif_device_attach(netdev);
+
+ return 0;
+}
+#endif
+
+static void atl1e_shutdown(struct pci_dev *pdev)
+{
+ atl1e_suspend(pdev, PMSG_SUSPEND);
+}
+
+static const struct net_device_ops atl1e_netdev_ops = {
+ .ndo_open = atl1e_open,
+ .ndo_stop = atl1e_close,
+ .ndo_start_xmit = atl1e_xmit_frame,
+ .ndo_get_stats = atl1e_get_stats,
+ .ndo_set_rx_mode = atl1e_set_multi,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = atl1e_set_mac_addr,
+ .ndo_fix_features = atl1e_fix_features,
+ .ndo_set_features = atl1e_set_features,
+ .ndo_change_mtu = atl1e_change_mtu,
+ .ndo_eth_ioctl = atl1e_ioctl,
+ .ndo_tx_timeout = atl1e_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = atl1e_netpoll,
+#endif
+
+};
+
+static int atl1e_init_netdev(struct net_device *netdev, struct pci_dev *pdev)
+{
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+ pci_set_drvdata(pdev, netdev);
+
+ netdev->netdev_ops = &atl1e_netdev_ops;
+
+ netdev->watchdog_timeo = AT_TX_WATCHDOG;
+ /* MTU range: 42 - 8170 */
+ netdev->min_mtu = ETH_ZLEN - (ETH_HLEN + VLAN_HLEN);
+ netdev->max_mtu = MAX_JUMBO_FRAME_SIZE -
+ (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN);
+ atl1e_set_ethtool_ops(netdev);
+
+ netdev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO |
+ NETIF_F_HW_VLAN_CTAG_RX;
+ netdev->features = netdev->hw_features | NETIF_F_HW_VLAN_CTAG_TX;
+ /* not enabled by default */
+ netdev->hw_features |= NETIF_F_RXALL | NETIF_F_RXFCS;
+ return 0;
+}
+
+/**
+ * atl1e_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in atl1e_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * atl1e_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ */
+static int atl1e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct atl1e_adapter *adapter = NULL;
+ static int cards_found;
+
+ int err = 0;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return dev_err_probe(&pdev->dev, err, "cannot enable PCI device\n");
+
+ /*
+ * The atl1e chip can DMA to 64-bit addresses, but it uses a single
+ * shared register for the high 32 bits, so only a single, aligned,
+ * 4 GB physical address range can be used at a time.
+ *
+ * Supporting 64-bit DMA on this hardware is more trouble than it's
+ * worth. It is far easier to limit to 32-bit DMA than update
+ * various kernel subsystems to support the mechanics required by a
+ * fixed-high-32-bit system.
+ */
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
+ goto err_dma;
+ }
+
+ err = pci_request_regions(pdev, atl1e_driver_name);
+ if (err) {
+ dev_err(&pdev->dev, "cannot obtain PCI resources\n");
+ goto err_pci_reg;
+ }
+
+ pci_set_master(pdev);
+
+ netdev = alloc_etherdev(sizeof(struct atl1e_adapter));
+ if (netdev == NULL) {
+ err = -ENOMEM;
+ goto err_alloc_etherdev;
+ }
+
+ err = atl1e_init_netdev(netdev, pdev);
+ if (err) {
+ netdev_err(netdev, "init netdevice failed\n");
+ goto err_init_netdev;
+ }
+ adapter = netdev_priv(netdev);
+ adapter->bd_number = cards_found;
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->hw.adapter = adapter;
+ adapter->hw.hw_addr = pci_iomap(pdev, BAR_0, 0);
+ if (!adapter->hw.hw_addr) {
+ err = -EIO;
+ netdev_err(netdev, "cannot map device registers\n");
+ goto err_ioremap;
+ }
+
+ /* init mii data */
+ adapter->mii.dev = netdev;
+ adapter->mii.mdio_read = atl1e_mdio_read;
+ adapter->mii.mdio_write = atl1e_mdio_write;
+ adapter->mii.phy_id_mask = 0x1f;
+ adapter->mii.reg_num_mask = MDIO_REG_ADDR_MASK;
+
+ netif_napi_add(netdev, &adapter->napi, atl1e_clean);
+
+ timer_setup(&adapter->phy_config_timer, atl1e_phy_config, 0);
+
+ /* get user settings */
+ atl1e_check_options(adapter);
+ /*
+ * Mark all PCI regions associated with PCI device
+ * pdev as being reserved by owner atl1e_driver_name
+ * Enables bus-mastering on the device and calls
+ * pcibios_set_master to do the needed arch specific settings
+ */
+ atl1e_setup_pcicmd(pdev);
+ /* setup the private structure */
+ err = atl1e_sw_init(adapter);
+ if (err) {
+ netdev_err(netdev, "net device private data init failed\n");
+ goto err_sw_init;
+ }
+
+ /* Init GPHY as early as possible due to power saving issue */
+ atl1e_phy_init(&adapter->hw);
+ /* reset the controller to
+ * put the device in a known good starting state */
+ err = atl1e_reset_hw(&adapter->hw);
+ if (err) {
+ err = -EIO;
+ goto err_reset;
+ }
+
+ if (atl1e_read_mac_addr(&adapter->hw) != 0) {
+ err = -EIO;
+ netdev_err(netdev, "get mac address failed\n");
+ goto err_eeprom;
+ }
+
+ eth_hw_addr_set(netdev, adapter->hw.mac_addr);
+ netdev_dbg(netdev, "mac address : %pM\n", adapter->hw.mac_addr);
+
+ INIT_WORK(&adapter->reset_task, atl1e_reset_task);
+ INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task);
+ netif_set_tso_max_size(netdev, MAX_TSO_SEG_SIZE);
+ err = register_netdev(netdev);
+ if (err) {
+ netdev_err(netdev, "register netdevice failed\n");
+ goto err_register;
+ }
+
+ /* assume we have no link for now */
+ netif_stop_queue(netdev);
+ netif_carrier_off(netdev);
+
+ cards_found++;
+
+ return 0;
+
+err_reset:
+err_register:
+err_sw_init:
+err_eeprom:
+ pci_iounmap(pdev, adapter->hw.hw_addr);
+err_init_netdev:
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_regions(pdev);
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * atl1e_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * atl1e_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ */
+static void atl1e_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ /*
+ * flush_scheduled work may reschedule our watchdog task, so
+ * explicitly disable watchdog tasks from being rescheduled
+ */
+ set_bit(__AT_DOWN, &adapter->flags);
+
+ atl1e_del_timer(adapter);
+ atl1e_cancel_work(adapter);
+
+ unregister_netdev(netdev);
+ atl1e_free_ring_resources(adapter);
+ atl1e_force_ps(&adapter->hw);
+ pci_iounmap(pdev, adapter->hw.hw_addr);
+ pci_release_regions(pdev);
+ free_netdev(netdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * atl1e_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t
+atl1e_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ atl1e_down(adapter);
+
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * atl1e_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000_resume routine.
+ */
+static pci_ers_result_t atl1e_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ if (pci_enable_device(pdev)) {
+ netdev_err(adapter->netdev,
+ "Cannot re-enable PCI device after reset\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ atl1e_reset_hw(&adapter->hw);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * atl1e_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the atl1e_resume routine.
+ */
+static void atl1e_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+ if (netif_running(netdev)) {
+ if (atl1e_up(adapter)) {
+ netdev_err(adapter->netdev,
+ "can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+}
+
+static const struct pci_error_handlers atl1e_err_handler = {
+ .error_detected = atl1e_io_error_detected,
+ .slot_reset = atl1e_io_slot_reset,
+ .resume = atl1e_io_resume,
+};
+
+static struct pci_driver atl1e_driver = {
+ .name = atl1e_driver_name,
+ .id_table = atl1e_pci_tbl,
+ .probe = atl1e_probe,
+ .remove = atl1e_remove,
+ /* Power Management Hooks */
+#ifdef CONFIG_PM
+ .suspend = atl1e_suspend,
+ .resume = atl1e_resume,
+#endif
+ .shutdown = atl1e_shutdown,
+ .err_handler = &atl1e_err_handler
+};
+
+module_pci_driver(atl1e_driver);
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_param.c b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c
new file mode 100644
index 0000000000..6b1d6df8da
--- /dev/null
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/netdevice.h>
+
+#include "atl1e.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+
+#define ATL1E_MAX_NIC 32
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+#define ATL1E_PARAM_INIT { [0 ... ATL1E_MAX_NIC] = OPTION_UNSET }
+
+#define ATL1E_PARAM(x, desc) \
+ static int x[ATL1E_MAX_NIC + 1] = ATL1E_PARAM_INIT; \
+ static unsigned int num_##x; \
+ module_param_array_named(x, x, int, &num_##x, 0); \
+ MODULE_PARM_DESC(x, desc);
+
+/* Transmit Memory count
+ *
+ * Valid Range: 64-2048
+ *
+ * Default Value: 128
+ */
+#define ATL1E_MIN_TX_DESC_CNT 32
+#define ATL1E_MAX_TX_DESC_CNT 1020
+#define ATL1E_DEFAULT_TX_DESC_CNT 128
+ATL1E_PARAM(tx_desc_cnt, "Transmit description count");
+
+/* Receive Memory Block Count
+ *
+ * Valid Range: 16-512
+ *
+ * Default Value: 128
+ */
+#define ATL1E_MIN_RX_MEM_SIZE 8 /* 8KB */
+#define ATL1E_MAX_RX_MEM_SIZE 1024 /* 1MB */
+#define ATL1E_DEFAULT_RX_MEM_SIZE 256 /* 128KB */
+ATL1E_PARAM(rx_mem_size, "memory size of rx buffer(KB)");
+
+/* User Specified MediaType Override
+ *
+ * Valid Range: 0-5
+ * - 0 - auto-negotiate at all supported speeds
+ * - 1 - only link at 100Mbps Full Duplex
+ * - 2 - only link at 100Mbps Half Duplex
+ * - 3 - only link at 10Mbps Full Duplex
+ * - 4 - only link at 10Mbps Half Duplex
+ * Default Value: 0
+ */
+
+ATL1E_PARAM(media_type, "MediaType Select");
+
+/* Interrupt Moderate Timer in units of 2 us
+ *
+ * Valid Range: 10-65535
+ *
+ * Default Value: 45000(90ms)
+ */
+#define INT_MOD_DEFAULT_CNT 100 /* 200us */
+#define INT_MOD_MAX_CNT 65000
+#define INT_MOD_MIN_CNT 50
+ATL1E_PARAM(int_mod_timer, "Interrupt Moderator Timer");
+
+#define AUTONEG_ADV_DEFAULT 0x2F
+#define AUTONEG_ADV_MASK 0x2F
+#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
+
+#define FLASH_VENDOR_DEFAULT 0
+#define FLASH_VENDOR_MIN 0
+#define FLASH_VENDOR_MAX 2
+
+struct atl1e_option {
+ enum { enable_option, range_option, list_option } type;
+ char *name;
+ char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ struct atl1e_opt_list { int i; char *str; } *p;
+ } l;
+ } arg;
+};
+
+static int atl1e_validate_option(int *value, struct atl1e_option *opt,
+ struct atl1e_adapter *adapter)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ netdev_info(adapter->netdev,
+ "%s Enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ netdev_info(adapter->netdev,
+ "%s Disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ netdev_info(adapter->netdev, "%s set to %i\n",
+ opt->name, *value);
+ return 0;
+ }
+ break;
+ case list_option:{
+ int i;
+ struct atl1e_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ netdev_info(adapter->netdev,
+ "%s\n", ent->str);
+ return 0;
+ }
+ }
+ break;
+ }
+ default:
+ BUG();
+ }
+
+ netdev_info(adapter->netdev, "Invalid %s specified (%i) %s\n",
+ opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+/**
+ * atl1e_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ */
+void atl1e_check_options(struct atl1e_adapter *adapter)
+{
+ int bd = adapter->bd_number;
+
+ if (bd >= ATL1E_MAX_NIC) {
+ netdev_notice(adapter->netdev,
+ "no configuration for board #%i\n", bd);
+ netdev_notice(adapter->netdev,
+ "Using defaults for all values\n");
+ }
+
+ { /* Transmit Ring Size */
+ struct atl1e_option opt = {
+ .type = range_option,
+ .name = "Transmit Ddescription Count",
+ .err = "using default of "
+ __MODULE_STRING(ATL1E_DEFAULT_TX_DESC_CNT),
+ .def = ATL1E_DEFAULT_TX_DESC_CNT,
+ .arg = { .r = { .min = ATL1E_MIN_TX_DESC_CNT,
+ .max = ATL1E_MAX_TX_DESC_CNT} }
+ };
+ int val;
+ if (num_tx_desc_cnt > bd) {
+ val = tx_desc_cnt[bd];
+ atl1e_validate_option(&val, &opt, adapter);
+ adapter->tx_ring.count = (u16) val & 0xFFFC;
+ } else
+ adapter->tx_ring.count = (u16)opt.def;
+ }
+
+ { /* Receive Memory Block Count */
+ struct atl1e_option opt = {
+ .type = range_option,
+ .name = "Memory size of rx buffer(KB)",
+ .err = "using default of "
+ __MODULE_STRING(ATL1E_DEFAULT_RX_MEM_SIZE),
+ .def = ATL1E_DEFAULT_RX_MEM_SIZE,
+ .arg = { .r = { .min = ATL1E_MIN_RX_MEM_SIZE,
+ .max = ATL1E_MAX_RX_MEM_SIZE} }
+ };
+ int val;
+ if (num_rx_mem_size > bd) {
+ val = rx_mem_size[bd];
+ atl1e_validate_option(&val, &opt, adapter);
+ adapter->rx_ring.page_size = (u32)val * 1024;
+ } else {
+ adapter->rx_ring.page_size = (u32)opt.def * 1024;
+ }
+ }
+
+ { /* Interrupt Moderate Timer */
+ struct atl1e_option opt = {
+ .type = range_option,
+ .name = "Interrupt Moderate Timer",
+ .err = "using default of "
+ __MODULE_STRING(INT_MOD_DEFAULT_CNT),
+ .def = INT_MOD_DEFAULT_CNT,
+ .arg = { .r = { .min = INT_MOD_MIN_CNT,
+ .max = INT_MOD_MAX_CNT} }
+ } ;
+ int val;
+ if (num_int_mod_timer > bd) {
+ val = int_mod_timer[bd];
+ atl1e_validate_option(&val, &opt, adapter);
+ adapter->hw.imt = (u16) val;
+ } else
+ adapter->hw.imt = (u16)(opt.def);
+ }
+
+ { /* MediaType */
+ struct atl1e_option opt = {
+ .type = range_option,
+ .name = "Speed/Duplex Selection",
+ .err = "using default of "
+ __MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR),
+ .def = MEDIA_TYPE_AUTO_SENSOR,
+ .arg = { .r = { .min = MEDIA_TYPE_AUTO_SENSOR,
+ .max = MEDIA_TYPE_10M_HALF} }
+ } ;
+ int val;
+ if (num_media_type > bd) {
+ val = media_type[bd];
+ atl1e_validate_option(&val, &opt, adapter);
+ adapter->hw.media_type = (u16) val;
+ } else
+ adapter->hw.media_type = (u16)(opt.def);
+
+ }
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 10:40:58 +0000