Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 270 insertions, 0 deletions

diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
new file mode 100644
index 0000000000..75ca3ddda1
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Broadcom device configuration
+#
+
+config NET_VENDOR_BROADCOM
+	bool "Broadcom devices"
+	default y
+	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
+		   SIBYTE_SB1xxx_SOC
+	help
+	  If you have a network (Ethernet) chipset belonging to this class,
+	  say Y.
+
+	  Note that the answer to this question does not directly affect
+	  the kernel: saying N will just cause the configurator to skip all
+	  the questions regarding Broadcom chipsets. If you say Y, you will
+	  be asked for your specific chipset/driver in the following questions.
+
+if NET_VENDOR_BROADCOM
+
+config B44
+	tristate "Broadcom 440x/47xx ethernet support"
+	depends on SSB_POSSIBLE && HAS_DMA
+	select SSB
+	select MII
+	select PHYLIB
+	help
+	  If you have a network (Ethernet) controller of this type, say Y
+	  or M here.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called b44.
+
+# Auto-select SSB PCI-HOST support, if possible
+config B44_PCI_AUTOSELECT
+	bool
+	depends on B44 && SSB_PCIHOST_POSSIBLE
+	select SSB_PCIHOST
+	default y
+
+# Auto-select SSB PCICORE driver, if possible
+config B44_PCICORE_AUTOSELECT
+	bool
+	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
+	select SSB_DRIVER_PCICORE
+	default y
+
+config B44_PCI
+	bool
+	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
+	default y
+
+config BCM4908_ENET
+	tristate "Broadcom BCM4908 internal mac support"
+	depends on ARCH_BCMBCA || COMPILE_TEST
+	default y if ARCH_BCMBCA
+	help
+	  This driver supports Ethernet controller integrated into Broadcom
+	  BCM4908 family SoCs.
+
+config BCM63XX_ENET
+	tristate "Broadcom 63xx internal mac support"
+	depends on BCM63XX
+	select MII
+	select PHYLIB
+	help
+	  This driver supports the ethernet MACs in the Broadcom 63xx
+	  MIPS chipset family (BCM63XX).
+
+config BCMGENET
+	tristate "Broadcom GENET internal MAC support"
+	depends on HAS_IOMEM
+	depends on PTP_1588_CLOCK_OPTIONAL || !ARCH_BCM2835
+	select MII
+	select PHYLIB
+	select FIXED_PHY
+	select BCM7XXX_PHY
+	select MDIO_BCM_UNIMAC
+	select DIMLIB
+	select BROADCOM_PHY if ARCH_BCM2835
+	help
+	  This driver supports the built-in Ethernet MACs found in the
+	  Broadcom BCM7xxx Set Top Box family chipset.
+
+config BNX2
+	tristate "QLogic bnx2 support"
+	depends on PCI
+	select CRC32
+	select FW_LOADER
+	help
+	  This driver supports QLogic bnx2 gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bnx2.  This is recommended.
+
+config CNIC
+	tristate "QLogic CNIC support"
+	depends on PCI && (IPV6 || IPV6=n)
+	depends on MMU
+	select BNX2
+	select UIO
+	help
+	  This driver supports offload features of QLogic bnx2 gigabit
+	  Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cnic.  This is recommended.
+
+config SB1250_MAC
+	tristate "SB1250 Gigabit Ethernet support"
+	depends on SIBYTE_SB1xxx_SOC
+	select PHYLIB
+	help
+	  This driver supports Gigabit Ethernet interfaces based on the
+	  Broadcom SiByte family of System-On-a-Chip parts.  They include
+	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
+	  and BCM1480 chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sb1250-mac.
+
+config TIGON3
+	tristate "Broadcom Tigon3 support"
+	depends on PCI
+	depends on PTP_1588_CLOCK_OPTIONAL
+	select PHYLIB
+	help
+	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tg3.  This is recommended.
+
+config TIGON3_HWMON
+	bool "Broadcom Tigon3 HWMON support"
+	default y
+	depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
+	help
+	  Say Y if you want to expose the thermal sensor on Tigon3 devices.
+
+config BNX2X
+	tristate "Broadcom NetXtremeII 10Gb support"
+	depends on PCI
+	depends on PTP_1588_CLOCK_OPTIONAL
+	select FW_LOADER
+	select ZLIB_INFLATE
+	select LIBCRC32C
+	select MDIO
+	help
+	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
+	  To compile this driver as a module, choose M here: the module
+	  will be called bnx2x.  This is recommended.
+
+config BNX2X_SRIOV
+	bool "Broadcom 578xx and 57712 SR-IOV support"
+	depends on BNX2X && PCI_IOV
+	default y
+	help
+	  This configuration parameter enables Single Root Input Output
+	  Virtualization support in the 578xx and 57712 products. This
+	  allows for virtual function acceleration in virtual environments.
+
+config BGMAC
+	tristate
+	help
+	  This enables the integrated ethernet controller support for many
+	  Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
+	  needs to be enabled to select this.
+
+config BGMAC_BCMA
+	tristate "Broadcom iProc GBit BCMA support"
+	depends on BCMA && BCMA_HOST_SOC
+	depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
+	select BGMAC
+	select PHYLIB
+	select FIXED_PHY
+	help
+	  This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
+	  They can be found on BCM47xx SoCs and provide gigabit ethernet.
+	  In case of using this driver on BCM4706 it's also requires to enable
+	  BCMA_DRIVER_GMAC_CMN to make it work.
+
+config BGMAC_PLATFORM
+	tristate "Broadcom iProc GBit platform support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	select BGMAC
+	select PHYLIB
+	select FIXED_PHY
+	default ARCH_BCM_IPROC
+	help
+	  Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
+	  controller through the generic platform interface
+
+config SYSTEMPORT
+	tristate "Broadcom SYSTEMPORT internal MAC support"
+	depends on HAS_IOMEM
+	depends on NET_DSA || !NET_DSA
+	select MII
+	select PHYLIB
+	select FIXED_PHY
+	select DIMLIB
+	help
+	  This driver supports the built-in Ethernet MACs found in the
+	  Broadcom BCM7xxx Set Top Box family chipset using an internal
+	  Ethernet switch.
+
+config BNXT
+	tristate "Broadcom NetXtreme-C/E support"
+	depends on PCI
+	depends on PTP_1588_CLOCK_OPTIONAL
+	select FW_LOADER
+	select LIBCRC32C
+	select NET_DEVLINK
+	select PAGE_POOL
+	select DIMLIB
+	select AUXILIARY_BUS
+	help
+	  This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
+	  Ethernet cards.  To compile this driver as a module, choose M here:
+	  the module will be called bnxt_en.  This is recommended.
+
+config BNXT_SRIOV
+	bool "Broadcom NetXtreme-C/E SR-IOV support"
+	depends on BNXT && PCI_IOV
+	default y
+	help
+	  This configuration parameter enables Single Root Input Output
+	  Virtualization support in the NetXtreme-C/E products. This
+	  allows for virtual function acceleration in virtual environments.
+
+config BNXT_FLOWER_OFFLOAD
+	bool "TC Flower offload support for NetXtreme-C/E"
+	depends on BNXT
+	default y
+	help
+	  This configuration parameter enables TC Flower packet classifier
+	  offload for eswitch.  This option enables SR-IOV switchdev eswitch
+	  offload.
+
+config BNXT_DCB
+	bool "Data Center Bridging (DCB) Support"
+	default n
+	depends on BNXT && DCB
+	help
+	  Say Y here if you want to use Data Center Bridging (DCB) in the
+	  driver.
+
+	  If unsure, say N.
+
+config BNXT_HWMON
+	bool "Broadcom NetXtreme-C/E HWMON support"
+	default y
+	depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
+	help
+	  Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
+	  devices, via the hwmon sysfs interface.
+
+config BCMASP
+	tristate "Broadcom ASP 2.0 Ethernet support"
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	default ARCH_BRCMSTB
+	depends on OF
+	select MII
+	select PHYLIB
+	select MDIO_BCM_UNIMAC
+	help
+	  This configuration enables the Broadcom ASP 2.0 Ethernet controller
+	  driver which is present in Broadcom STB SoCs such as 72165.
+
+endif # NET_VENDOR_BROADCOM