summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/Kconfig
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/net/ethernet/intel/Kconfig
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/ethernet/intel/Kconfig')
-rw-r--r--drivers/net/ethernet/intel/Kconfig359
1 files changed, 359 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
new file mode 100644
index 0000000000..9bc0a95198
--- /dev/null
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -0,0 +1,359 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel network device configuration
+#
+
+config NET_VENDOR_INTEL
+ bool "Intel devices"
+ default y
+ help
+ If you have a network (Ethernet) card belonging to this class, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Intel cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_INTEL
+
+config E100
+ tristate "Intel(R) PRO/100+ support"
+ depends on PCI
+ select MII
+ help
+ This driver supports Intel(R) PRO/100 family of adapters.
+ To verify that your adapter is supported, find the board ID number
+ on the adapter. Look for a label that has a barcode and a number
+ in the format 123456-001 (six digits hyphen three digits).
+
+ Use the above information and the Adapter & Driver ID Guide that
+ can be located at:
+
+ <http://support.intel.com>
+
+ to identify the adapter.
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/intel/e100.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called e100.
+
+config E1000
+ tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
+ depends on PCI
+ help
+ This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide that can be located at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/intel/e1000.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called e1000.
+
+config E1000E
+ tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
+ depends on PCI && (!SPARC32 || BROKEN)
+ depends on PTP_1588_CLOCK_OPTIONAL
+ select CRC32
+ help
+ This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
+ ethernet family of adapters. For PCI or PCI-X e1000 adapters,
+ use the regular e1000 driver For more information on how to
+ identify your adapter, go to the Adapter & Driver ID Guide that
+ can be located at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/intel/e1000e.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called e1000e.
+
+config E1000E_HWTS
+ bool "Support HW cross-timestamp on PCH devices"
+ default y
+ depends on E1000E && X86
+ help
+ Say Y to enable hardware supported cross-timestamping on PCH
+ devices. The cross-timestamp is available through the PTP clock
+ driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).
+
+config IGB
+ tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
+ depends on PCI
+ depends on PTP_1588_CLOCK_OPTIONAL
+ select I2C
+ select I2C_ALGOBIT
+ help
+ This driver supports Intel(R) 82575/82576 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide that can be located at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/intel/igb.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called igb.
+
+config IGB_HWMON
+ bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
+ default y
+ depends on IGB && HWMON && !(IGB=y && HWMON=m)
+ help
+ Say Y if you want to expose thermal sensor data on Intel devices.
+
+ Some of our devices contain thermal sensors, both external and internal.
+ This data is available via the hwmon sysfs interface and exposes
+ the onboard sensors.
+
+config IGB_DCA
+ bool "Direct Cache Access (DCA) Support"
+ default y
+ depends on IGB && DCA && !(IGB=y && DCA=m)
+ help
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
+
+config IGBVF
+ tristate "Intel(R) 82576 Virtual Function Ethernet support"
+ depends on PCI
+ help
+ This driver supports Intel(R) 82576 virtual functions. For more
+ information on how to identify your adapter, go to the Adapter &
+ Driver ID Guide that can be located at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/intel/igbvf.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called igbvf.
+
+config IXGBE
+ tristate "Intel(R) 10GbE PCI Express adapters support"
+ depends on PCI
+ depends on PTP_1588_CLOCK_OPTIONAL
+ select MDIO
+ select PHYLIB
+ help
+ This driver supports Intel(R) 10GbE PCI Express family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide that can be located at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgbe.
+
+config IXGBE_HWMON
+ bool "Intel(R) 10GbE PCI Express adapters HWMON support"
+ default y
+ depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
+ help
+ Say Y if you want to expose the thermal sensor data on some of
+ our cards, via a hwmon sysfs interface.
+
+config IXGBE_DCA
+ bool "Direct Cache Access (DCA) Support"
+ default y
+ depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+ help
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
+
+config IXGBE_DCB
+ bool "Data Center Bridging (DCB) Support"
+ default n
+ depends on IXGBE && DCB
+ help
+ Say Y here if you want to use Data Center Bridging (DCB) in the
+ driver.
+
+ If unsure, say N.
+
+config IXGBE_IPSEC
+ bool "IPSec XFRM cryptography-offload acceleration"
+ depends on IXGBE
+ depends on XFRM_OFFLOAD
+ default y
+ select XFRM_ALGO
+ help
+ Enable support for IPSec offload in ixgbe.ko
+
+config IXGBEVF
+ tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
+ depends on PCI_MSI
+ help
+ This driver supports Intel(R) PCI Express virtual functions for the
+ Intel(R) ixgbe driver. For more information on how to identify your
+ adapter, go to the Adapter & Driver ID Guide that can be located at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/intel/ixgbevf.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgbevf. MSI-X interrupt support is required
+ for this driver to work correctly.
+
+config IXGBEVF_IPSEC
+ bool "IPSec XFRM cryptography-offload acceleration"
+ depends on IXGBEVF
+ depends on XFRM_OFFLOAD
+ default y
+ select XFRM_ALGO
+ help
+ Enable support for IPSec offload in ixgbevf.ko
+
+config I40E
+ tristate "Intel(R) Ethernet Controller XL710 Family support"
+ depends on PTP_1588_CLOCK_OPTIONAL
+ depends on PCI
+ select AUXILIARY_BUS
+ help
+ This driver supports Intel(R) Ethernet Controller XL710 Family of
+ devices. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide that can be located at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/intel/i40e.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called i40e.
+
+config I40E_DCB
+ bool "Data Center Bridging (DCB) Support"
+ default n
+ depends on I40E && DCB
+ help
+ Say Y here if you want to use Data Center Bridging (DCB) in the
+ driver.
+
+ If unsure, say N.
+
+# this is here to allow seamless migration from I40EVF --> IAVF name
+# so that CONFIG_IAVF symbol will always mirror the state of CONFIG_I40EVF
+config IAVF
+ tristate
+config I40EVF
+ tristate "Intel(R) Ethernet Adaptive Virtual Function support"
+ select IAVF
+ depends on PCI_MSI
+ help
+ This driver supports virtual functions for Intel XL710,
+ X710, X722, XXV710, and all devices advertising support for
+ Intel Ethernet Adaptive Virtual Function devices. For more
+ information on how to identify your adapter, go to the Adapter
+ & Driver ID Guide that can be located at:
+
+ <https://support.intel.com>
+
+ This driver was formerly named i40evf.
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/intel/iavf.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called iavf. MSI-X interrupt support is required
+ for this driver to work correctly.
+
+config ICE
+ tristate "Intel(R) Ethernet Connection E800 Series Support"
+ default n
+ depends on PCI_MSI
+ depends on PTP_1588_CLOCK_OPTIONAL
+ depends on GNSS || GNSS = n
+ select AUXILIARY_BUS
+ select DIMLIB
+ select NET_DEVLINK
+ select PLDMFW
+ help
+ This driver supports Intel(R) Ethernet Connection E800 Series of
+ devices. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide that can be located at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/intel/ice.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ice.
+
+config ICE_SWITCHDEV
+ bool "Switchdev Support"
+ default y
+ depends on ICE && NET_SWITCHDEV
+ help
+ Switchdev support provides internal SRIOV packet steering and switching.
+
+ To enable it on running kernel use devlink tool:
+ #devlink dev eswitch set pci/0000:XX:XX.X mode switchdev
+
+ Say Y here if you want to use Switchdev in the driver.
+
+ If unsure, say N.
+
+config ICE_HWTS
+ bool "Support HW cross-timestamp on platforms with PTM support"
+ default y
+ depends on ICE && X86
+ help
+ Say Y to enable hardware supported cross-timestamping on platforms
+ with PCIe PTM support. The cross-timestamp is available through
+ the PTP clock driver precise cross-timestamp ioctl
+ (PTP_SYS_OFFSET_PRECISE).
+
+config FM10K
+ tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"
+ default n
+ depends on PCI_MSI
+ depends on PTP_1588_CLOCK_OPTIONAL
+ help
+ This driver supports Intel(R) FM10000 Ethernet Switch Host
+ Interface. For more information on how to identify your adapter,
+ go to the Adapter & Driver ID Guide that can be located at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/device_drivers/ethernet/intel/fm10k.rst>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called fm10k. MSI-X interrupt support is required
+
+config IGC
+ tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
+ default n
+ depends on PCI
+ depends on PTP_1588_CLOCK_OPTIONAL
+ help
+ This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
+ family of adapters.
+
+ For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide that can be located at:
+
+ <http://support.intel.com>
+
+ To compile this driver as a module, choose M here. The module
+ will be called igc.
+
+endif # NET_VENDOR_INTEL