Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 118 insertions, 80 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 08c3d477dd..93544f1cc2 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -107,6 +107,16 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
 	return e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0);
 }
 
+void e1000e_disable_phy_retry(struct e1000_hw *hw)
+{
+	hw->phy.retry_enabled = false;
+}
+
+void e1000e_enable_phy_retry(struct e1000_hw *hw)
+{
+	hw->phy.retry_enabled = true;
+}
+
 /**
  *  e1000e_read_phy_reg_mdic - Read MDI control register
  *  @hw: pointer to the HW structure
@@ -118,57 +128,73 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
  **/
 s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 {
+	u32 i, mdic = 0, retry_counter, retry_max;
 	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, mdic = 0;
+	bool success;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
 		e_dbg("PHY Address %d is out of range\n", offset);
 		return -E1000_ERR_PARAM;
 	}
 
+	retry_max = phy->retry_enabled ? phy->retry_count : 0;
+
 	/* Set up Op-code, Phy Address, and register offset in the MDI
 	 * Control register.  The MAC will take care of interfacing with the
 	 * PHY to retrieve the desired data.
 	 */
-	mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-		(phy->addr << E1000_MDIC_PHY_SHIFT) |
-		(E1000_MDIC_OP_READ));
+	for (retry_counter = 0; retry_counter <= retry_max; retry_counter++) {
+		success = true;
 
-	ew32(MDIC, mdic);
+		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+			(phy->addr << E1000_MDIC_PHY_SHIFT) |
+			(E1000_MDIC_OP_READ));
 
-	/* Poll the ready bit to see if the MDI read completed
-	 * Increasing the time out as testing showed failures with
-	 * the lower time out
-	 */
-	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
-		udelay(50);
-		mdic = er32(MDIC);
-		if (mdic & E1000_MDIC_READY)
-			break;
-	}
-	if (!(mdic & E1000_MDIC_READY)) {
-		e_dbg("MDI Read PHY Reg Address %d did not complete\n", offset);
-		return -E1000_ERR_PHY;
-	}
-	if (mdic & E1000_MDIC_ERROR) {
-		e_dbg("MDI Read PHY Reg Address %d Error\n", offset);
-		return -E1000_ERR_PHY;
-	}
-	if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
-		e_dbg("MDI Read offset error - requested %d, returned %d\n",
-		      offset,
-		      (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
-		return -E1000_ERR_PHY;
-	}
-	*data = (u16)mdic;
+		ew32(MDIC, mdic);
 
-	/* Allow some time after each MDIC transaction to avoid
-	 * reading duplicate data in the next MDIC transaction.
-	 */
-	if (hw->mac.type == e1000_pch2lan)
-		udelay(100);
+		/* Poll the ready bit to see if the MDI read completed
+		 * Increasing the time out as testing showed failures with
+		 * the lower time out
+		 */
+		for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+			usleep_range(50, 60);
+			mdic = er32(MDIC);
+			if (mdic & E1000_MDIC_READY)
+				break;
+		}
+		if (!(mdic & E1000_MDIC_READY)) {
+			e_dbg("MDI Read PHY Reg Address %d did not complete\n",
+			      offset);
+			success = false;
+		}
+		if (mdic & E1000_MDIC_ERROR) {
+			e_dbg("MDI Read PHY Reg Address %d Error\n", offset);
+			success = false;
+		}
+		if (FIELD_GET(E1000_MDIC_REG_MASK, mdic) != offset) {
+			e_dbg("MDI Read offset error - requested %d, returned %d\n",
+			      offset, FIELD_GET(E1000_MDIC_REG_MASK, mdic));
+			success = false;
+		}
 
-	return 0;
+		/* Allow some time after each MDIC transaction to avoid
+		 * reading duplicate data in the next MDIC transaction.
+		 */
+		if (hw->mac.type == e1000_pch2lan)
+			usleep_range(100, 150);
+
+		if (success) {
+			*data = (u16)mdic;
+			return 0;
+		}
+
+		if (retry_counter != retry_max) {
+			e_dbg("Perform retry on PHY transaction...\n");
+			mdelay(10);
+		}
+	}
+
+	return -E1000_ERR_PHY;
 }
 
 /**
@@ -181,57 +207,72 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
  **/
 s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 {
+	u32 i, mdic = 0, retry_counter, retry_max;
 	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, mdic = 0;
+	bool success;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
 		e_dbg("PHY Address %d is out of range\n", offset);
 		return -E1000_ERR_PARAM;
 	}
 
+	retry_max = phy->retry_enabled ? phy->retry_count : 0;
+
 	/* Set up Op-code, Phy Address, and register offset in the MDI
 	 * Control register.  The MAC will take care of interfacing with the
 	 * PHY to retrieve the desired data.
 	 */
-	mdic = (((u32)data) |
-		(offset << E1000_MDIC_REG_SHIFT) |
-		(phy->addr << E1000_MDIC_PHY_SHIFT) |
-		(E1000_MDIC_OP_WRITE));
+	for (retry_counter = 0; retry_counter <= retry_max; retry_counter++) {
+		success = true;
 
-	ew32(MDIC, mdic);
+		mdic = (((u32)data) |
+			(offset << E1000_MDIC_REG_SHIFT) |
+			(phy->addr << E1000_MDIC_PHY_SHIFT) |
+			(E1000_MDIC_OP_WRITE));
 
-	/* Poll the ready bit to see if the MDI read completed
-	 * Increasing the time out as testing showed failures with
-	 * the lower time out
-	 */
-	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
-		udelay(50);
-		mdic = er32(MDIC);
-		if (mdic & E1000_MDIC_READY)
-			break;
-	}
-	if (!(mdic & E1000_MDIC_READY)) {
-		e_dbg("MDI Write PHY Reg Address %d did not complete\n", offset);
-		return -E1000_ERR_PHY;
-	}
-	if (mdic & E1000_MDIC_ERROR) {
-		e_dbg("MDI Write PHY Red Address %d Error\n", offset);
-		return -E1000_ERR_PHY;
-	}
-	if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
-		e_dbg("MDI Write offset error - requested %d, returned %d\n",
-		      offset,
-		      (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
-		return -E1000_ERR_PHY;
-	}
+		ew32(MDIC, mdic);
 
-	/* Allow some time after each MDIC transaction to avoid
-	 * reading duplicate data in the next MDIC transaction.
-	 */
-	if (hw->mac.type == e1000_pch2lan)
-		udelay(100);
+		/* Poll the ready bit to see if the MDI read completed
+		 * Increasing the time out as testing showed failures with
+		 * the lower time out
+		 */
+		for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+			usleep_range(50, 60);
+			mdic = er32(MDIC);
+			if (mdic & E1000_MDIC_READY)
+				break;
+		}
+		if (!(mdic & E1000_MDIC_READY)) {
+			e_dbg("MDI Write PHY Reg Address %d did not complete\n",
+			      offset);
+			success = false;
+		}
+		if (mdic & E1000_MDIC_ERROR) {
+			e_dbg("MDI Write PHY Reg Address %d Error\n", offset);
+			success = false;
+		}
+		if (FIELD_GET(E1000_MDIC_REG_MASK, mdic) != offset) {
+			e_dbg("MDI Write offset error - requested %d, returned %d\n",
+			      offset, FIELD_GET(E1000_MDIC_REG_MASK, mdic));
+			success = false;
+		}
 
-	return 0;
+		/* Allow some time after each MDIC transaction to avoid
+		 * reading duplicate data in the next MDIC transaction.
+		 */
+		if (hw->mac.type == e1000_pch2lan)
+			usleep_range(100, 150);
+
+		if (success)
+			return 0;
+
+		if (retry_counter != retry_max) {
+			e_dbg("Perform retry on PHY transaction...\n");
+			mdelay(10);
+		}
+	}
+
+	return -E1000_ERR_PHY;
 }
 
 /**
@@ -463,8 +504,8 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
 			return ret_val;
 	}
 
-	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
-		       E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+	kmrnctrlsta = FIELD_PREP(E1000_KMRNCTRLSTA_OFFSET, offset) |
+		      E1000_KMRNCTRLSTA_REN;
 	ew32(KMRNCTRLSTA, kmrnctrlsta);
 	e1e_flush();
 
@@ -536,8 +577,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
 			return ret_val;
 	}
 
-	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
-		       E1000_KMRNCTRLSTA_OFFSET) | data;
+	kmrnctrlsta = FIELD_PREP(E1000_KMRNCTRLSTA_OFFSET, offset) | data;
 	ew32(KMRNCTRLSTA, kmrnctrlsta);
 	e1e_flush();
 
@@ -1793,8 +1833,7 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
-		 M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+	index = FIELD_GET(M88E1000_PSSR_CABLE_LENGTH, phy_data);
 
 	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1)
 		return -E1000_ERR_PHY;
@@ -3234,8 +3273,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
-		  I82577_DSTATUS_CABLE_LENGTH_SHIFT);
+	length = FIELD_GET(I82577_DSTATUS_CABLE_LENGTH, phy_data);
 
 	if (length == E1000_CABLE_LENGTH_UNDEFINED)
 		return -E1000_ERR_PHY;