Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 301 insertions, 0 deletions

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
new file mode 100644
index 0000000000..9e3b761820
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
@@ -0,0 +1,301 @@
+/*
+ * Copyright (c) 2012 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/mlx4/device.h>
+#include <linux/clocksource.h>
+
+#include "mlx4_en.h"
+
+/* mlx4_en_read_clock - read raw cycle counter (to be used by time counter)
+ */
+static u64 mlx4_en_read_clock(const struct cyclecounter *tc)
+{
+	struct mlx4_en_dev *mdev =
+		container_of(tc, struct mlx4_en_dev, cycles);
+	struct mlx4_dev *dev = mdev->dev;
+
+	return mlx4_read_clock(dev) & tc->mask;
+}
+
+u64 mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe)
+{
+	u64 hi, lo;
+	struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe;
+
+	lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo);
+	hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16;
+
+	return hi | lo;
+}
+
+u64 mlx4_en_get_hwtstamp(struct mlx4_en_dev *mdev, u64 timestamp)
+{
+	unsigned int seq;
+	u64 nsec;
+
+	do {
+		seq = read_seqbegin(&mdev->clock_lock);
+		nsec = timecounter_cyc2time(&mdev->clock, timestamp);
+	} while (read_seqretry(&mdev->clock_lock, seq));
+
+	return ns_to_ktime(nsec);
+}
+
+void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev,
+			    struct skb_shared_hwtstamps *hwts,
+			    u64 timestamp)
+{
+	memset(hwts, 0, sizeof(struct skb_shared_hwtstamps));
+	hwts->hwtstamp = mlx4_en_get_hwtstamp(mdev, timestamp);
+}
+
+/**
+ * mlx4_en_remove_timestamp - disable PTP device
+ * @mdev: board private structure
+ *
+ * Stop the PTP support.
+ **/
+void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev)
+{
+	if (mdev->ptp_clock) {
+		ptp_clock_unregister(mdev->ptp_clock);
+		mdev->ptp_clock = NULL;
+		mlx4_info(mdev, "removed PHC\n");
+	}
+}
+
+#define MLX4_EN_WRAP_AROUND_SEC	10UL
+/* By scheduling the overflow check every 5 seconds, we have a reasonably
+ * good chance we wont miss a wrap around.
+ * TOTO: Use a timer instead of a work queue to increase the guarantee.
+ */
+#define MLX4_EN_OVERFLOW_PERIOD (MLX4_EN_WRAP_AROUND_SEC * HZ / 2)
+
+void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev)
+{
+	bool timeout = time_is_before_jiffies(mdev->last_overflow_check +
+					      MLX4_EN_OVERFLOW_PERIOD);
+	unsigned long flags;
+
+	if (timeout) {
+		write_seqlock_irqsave(&mdev->clock_lock, flags);
+		timecounter_read(&mdev->clock);
+		write_sequnlock_irqrestore(&mdev->clock_lock, flags);
+		mdev->last_overflow_check = jiffies;
+	}
+}
+
+/**
+ * mlx4_en_phc_adjfine - adjust the frequency of the hardware clock
+ * @ptp: ptp clock structure
+ * @scaled_ppm: Desired frequency change in scaled parts per million
+ *
+ * Adjust the frequency of the PHC cycle counter by the indicated scaled_ppm
+ * from the base frequency.
+ *
+ * Scaled parts per million is ppm with a 16-bit binary fractional field.
+ **/
+static int mlx4_en_phc_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
+{
+	u32 mult;
+	unsigned long flags;
+	struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
+						ptp_clock_info);
+
+	mult = (u32)adjust_by_scaled_ppm(mdev->nominal_c_mult, scaled_ppm);
+
+	write_seqlock_irqsave(&mdev->clock_lock, flags);
+	timecounter_read(&mdev->clock);
+	mdev->cycles.mult = mult;
+	write_sequnlock_irqrestore(&mdev->clock_lock, flags);
+
+	return 0;
+}
+
+/**
+ * mlx4_en_phc_adjtime - Shift the time of the hardware clock
+ * @ptp: ptp clock structure
+ * @delta: Desired change in nanoseconds
+ *
+ * Adjust the timer by resetting the timecounter structure.
+ **/
+static int mlx4_en_phc_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+	struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
+						ptp_clock_info);
+	unsigned long flags;
+
+	write_seqlock_irqsave(&mdev->clock_lock, flags);
+	timecounter_adjtime(&mdev->clock, delta);
+	write_sequnlock_irqrestore(&mdev->clock_lock, flags);
+
+	return 0;
+}
+
+/**
+ * mlx4_en_phc_gettime - Reads the current time from the hardware clock
+ * @ptp: ptp clock structure
+ * @ts: timespec structure to hold the current time value
+ *
+ * Read the timecounter and return the correct value in ns after converting
+ * it into a struct timespec.
+ **/
+static int mlx4_en_phc_gettime(struct ptp_clock_info *ptp,
+			       struct timespec64 *ts)
+{
+	struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
+						ptp_clock_info);
+	unsigned long flags;
+	u64 ns;
+
+	write_seqlock_irqsave(&mdev->clock_lock, flags);
+	ns = timecounter_read(&mdev->clock);
+	write_sequnlock_irqrestore(&mdev->clock_lock, flags);
+
+	*ts = ns_to_timespec64(ns);
+
+	return 0;
+}
+
+/**
+ * mlx4_en_phc_settime - Set the current time on the hardware clock
+ * @ptp: ptp clock structure
+ * @ts: timespec containing the new time for the cycle counter
+ *
+ * Reset the timecounter to use a new base value instead of the kernel
+ * wall timer value.
+ **/
+static int mlx4_en_phc_settime(struct ptp_clock_info *ptp,
+			       const struct timespec64 *ts)
+{
+	struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
+						ptp_clock_info);
+	u64 ns = timespec64_to_ns(ts);
+	unsigned long flags;
+
+	/* reset the timecounter */
+	write_seqlock_irqsave(&mdev->clock_lock, flags);
+	timecounter_init(&mdev->clock, &mdev->cycles, ns);
+	write_sequnlock_irqrestore(&mdev->clock_lock, flags);
+
+	return 0;
+}
+
+/**
+ * mlx4_en_phc_enable - enable or disable an ancillary feature
+ * @ptp: ptp clock structure
+ * @request: Desired resource to enable or disable
+ * @on: Caller passes one to enable or zero to disable
+ *
+ * Enable (or disable) ancillary features of the PHC subsystem.
+ * Currently, no ancillary features are supported.
+ **/
+static int mlx4_en_phc_enable(struct ptp_clock_info __always_unused *ptp,
+			      struct ptp_clock_request __always_unused *request,
+			      int __always_unused on)
+{
+	return -EOPNOTSUPP;
+}
+
+static const struct ptp_clock_info mlx4_en_ptp_clock_info = {
+	.owner		= THIS_MODULE,
+	.max_adj	= 100000000,
+	.n_alarm	= 0,
+	.n_ext_ts	= 0,
+	.n_per_out	= 0,
+	.n_pins		= 0,
+	.pps		= 0,
+	.adjfine	= mlx4_en_phc_adjfine,
+	.adjtime	= mlx4_en_phc_adjtime,
+	.gettime64	= mlx4_en_phc_gettime,
+	.settime64	= mlx4_en_phc_settime,
+	.enable		= mlx4_en_phc_enable,
+};
+
+
+/* This function calculates the max shift that enables the user range
+ * of MLX4_EN_WRAP_AROUND_SEC values in the cycles register.
+ */
+static u32 freq_to_shift(u16 freq)
+{
+	u32 freq_khz = freq * 1000;
+	u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC;
+	u64 max_val_cycles_rounded = 1ULL << fls64(max_val_cycles - 1);
+	/* calculate max possible multiplier in order to fit in 64bit */
+	u64 max_mul = div64_u64(ULLONG_MAX, max_val_cycles_rounded);
+
+	/* This comes from the reverse of clocksource_khz2mult */
+	return ilog2(div_u64(max_mul * freq_khz, 1000000));
+}
+
+void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev)
+{
+	struct mlx4_dev *dev = mdev->dev;
+	unsigned long flags;
+
+	/* mlx4_en_init_timestamp is called for each netdev.
+	 * mdev->ptp_clock is common for all ports, skip initialization if
+	 * was done for other port.
+	 */
+	if (mdev->ptp_clock)
+		return;
+
+	seqlock_init(&mdev->clock_lock);
+
+	memset(&mdev->cycles, 0, sizeof(mdev->cycles));
+	mdev->cycles.read = mlx4_en_read_clock;
+	mdev->cycles.mask = CLOCKSOURCE_MASK(48);
+	mdev->cycles.shift = freq_to_shift(dev->caps.hca_core_clock);
+	mdev->cycles.mult =
+		clocksource_khz2mult(1000 * dev->caps.hca_core_clock, mdev->cycles.shift);
+	mdev->nominal_c_mult = mdev->cycles.mult;
+
+	write_seqlock_irqsave(&mdev->clock_lock, flags);
+	timecounter_init(&mdev->clock, &mdev->cycles,
+			 ktime_to_ns(ktime_get_real()));
+	write_sequnlock_irqrestore(&mdev->clock_lock, flags);
+
+	/* Configure the PHC */
+	mdev->ptp_clock_info = mlx4_en_ptp_clock_info;
+	snprintf(mdev->ptp_clock_info.name, 16, "mlx4 ptp");
+
+	mdev->ptp_clock = ptp_clock_register(&mdev->ptp_clock_info,
+					     &mdev->pdev->dev);
+	if (IS_ERR(mdev->ptp_clock)) {
+		mdev->ptp_clock = NULL;
+		mlx4_err(mdev, "ptp_clock_register failed\n");
+	} else if (mdev->ptp_clock) {
+		mlx4_info(mdev, "registered PHC clock\n");
+	}
+
+}