Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 217 insertions, 0 deletions

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
new file mode 100644
index 0000000000..cac61f5d3f
--- /dev/null
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# TI device configuration
+#
+
+config NET_VENDOR_TI
+	bool "Texas Instruments (TI) devices"
+	default y
+	depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
+	help
+	  If you have a network (Ethernet) card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about TI devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_TI
+
+config TI_DAVINCI_EMAC
+	tristate "TI DaVinci EMAC Support"
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) || COMPILE_TEST
+	select TI_DAVINCI_MDIO
+	select PHYLIB
+	select GENERIC_ALLOCATOR
+	help
+	  This driver supports TI's DaVinci Ethernet .
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_emac_driver.  This is recommended.
+
+config TI_DAVINCI_MDIO
+	tristate "TI DaVinci MDIO Support"
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	select PHYLIB
+	select MDIO_BITBANG
+	help
+	  This driver supports TI's DaVinci MDIO module.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_mdio.  This is recommended.
+
+config TI_CPSW_PHY_SEL
+	bool "TI CPSW Phy mode Selection (DEPRECATED)"
+	default n
+	help
+	  This driver supports configuring of the phy mode connected to
+	  the CPSW. DEPRECATED: use PHY_TI_GMII_SEL.
+
+config TI_CPSW
+	tristate "TI CPSW Switch Support"
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on TI_CPTS || !TI_CPTS
+	select TI_DAVINCI_MDIO
+	select MFD_SYSCON
+	select PAGE_POOL
+	select REGMAP
+	imply PHY_TI_GMII_SEL
+	help
+	  This driver supports TI's CPSW Ethernet Switch.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cpsw.
+
+config TI_CPSW_SWITCHDEV
+	tristate "TI CPSW Switch Support with switchdev"
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on NET_SWITCHDEV
+	depends on TI_CPTS || !TI_CPTS
+	select PAGE_POOL
+	select TI_DAVINCI_MDIO
+	select MFD_SYSCON
+	select REGMAP
+	select NET_DEVLINK
+	imply PHY_TI_GMII_SEL
+	help
+	  This driver supports TI's CPSW Ethernet Switch.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cpsw_new.
+
+config TI_CPTS
+	tristate "TI Common Platform Time Sync (CPTS) Support"
+	depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
+	depends on COMMON_CLK
+	depends on PTP_1588_CLOCK
+	help
+	  This driver supports the Common Platform Time Sync unit of
+	  the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem.
+	  The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the
+	  driver offers a PTP Hardware Clock.
+
+config TI_K3_CPPI_DESC_POOL
+	tristate
+
+config TI_K3_AM65_CPSW_NUSS
+	tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
+	depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER
+	select NET_DEVLINK
+	select TI_DAVINCI_MDIO
+	select PHYLINK
+	select TI_K3_CPPI_DESC_POOL
+	imply PHY_TI_GMII_SEL
+	depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS
+	help
+	  This driver supports TI K3 AM654/J721E CPSW2G Ethernet SubSystem.
+	  The two-port Gigabit Ethernet MAC (MCU_CPSW0) subsystem provides
+	  Ethernet packet communication for the device: One Ethernet port
+	  (port 1) with selectable RGMII and RMII interfaces and an internal
+	  Communications Port Programming Interface (CPPI) port (port 0).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ti-am65-cpsw-nuss.
+
+config TI_K3_AM65_CPSW_SWITCHDEV
+	bool "TI K3 AM654x/J721E CPSW Switch mode support"
+	depends on TI_K3_AM65_CPSW_NUSS
+	depends on NET_SWITCHDEV
+	help
+	 This enables switchdev support for TI K3 CPSWxG Ethernet
+	 Switch. Enable this driver to support hardware switch support for AM65
+	 CPSW NUSS driver.
+
+config TI_K3_AM65_CPTS
+	tristate "TI K3 AM65x CPTS"
+	depends on ARCH_K3 && OF
+	depends on PTP_1588_CLOCK
+	help
+	  Say y here to support the TI K3 AM65x CPTS with 1588 features such as
+	  PTP hardware clock for each CPTS device and network packets
+	  timestamping where applicable.
+	  Depending on integration CPTS blocks enable compliance with
+	  the IEEE 1588-2008 standard for a precision clock synchronization
+	  protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn)
+	  and PCIe Subsystem Precision Time Measurement (PTM).
+
+config TI_AM65_CPSW_TAS
+	bool "Enable TAS offload in AM65 CPSW"
+	depends on TI_K3_AM65_CPSW_NUSS && NET_SCH_TAPRIO && TI_K3_AM65_CPTS
+	help
+	  Say y here to support Time Aware Shaper(TAS) offload in AM65 CPSW.
+	  AM65 CPSW hardware supports Enhanced Scheduled Traffic (EST)
+	  defined in IEEE 802.1Q 2018. The EST scheduler runs on CPTS and the
+	  TAS/EST schedule is updated in the Fetch RAM memory of the CPSW.
+
+config TI_KEYSTONE_NETCP
+	tristate "TI Keystone NETCP Core Support"
+	select TI_DAVINCI_MDIO
+	depends on OF
+	depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
+	depends on TI_CPTS || !TI_CPTS
+	help
+	  This driver supports TI's Keystone NETCP Core.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called keystone_netcp.
+
+config TI_KEYSTONE_NETCP_ETHSS
+	depends on TI_KEYSTONE_NETCP
+	tristate "TI Keystone NETCP Ethernet subsystem Support"
+	help
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called keystone_netcp_ethss.
+
+config TLAN
+	tristate "TI ThunderLAN support"
+	depends on (PCI || EISA)
+	help
+	  If you have a PCI Ethernet network card based on the ThunderLAN chip
+	  which is supported by this driver, say Y here.
+
+	  Devices currently supported by this driver are Compaq Netelligent,
+	  Compaq NetFlex and Olicom cards.  Please read the file
+	  <file:Documentation/networking/device_drivers/ethernet/ti/tlan.rst>
+	  for more details.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called tlan.
+
+	  Please email feedback to <torben.mathiasen@compaq.com>.
+
+config CPMAC
+	tristate "TI AR7 CPMAC Ethernet support"
+	depends on AR7
+	select PHYLIB
+	help
+	  TI AR7 CPMAC Ethernet support
+
+config TI_ICSSG_PRUETH
+	tristate "TI Gigabit PRU Ethernet driver"
+	select PHYLIB
+	select TI_ICSS_IEP
+	select TI_K3_CPPI_DESC_POOL
+	depends on PRU_REMOTEPROC
+	depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER
+	help
+	  Support dual Gigabit Ethernet ports over the ICSSG PRU Subsystem.
+	  This subsystem is available starting with the AM65 platform.
+
+	  This driver requires firmware binaries which will run on the PRUs
+	  to support the Ethernet operation. Currently, it supports Ethernet
+	  with 1G and 100M link speed.
+
+config TI_ICSS_IEP
+	tristate "TI PRU ICSS IEP driver"
+	depends on PTP_1588_CLOCK_OPTIONAL
+	depends on TI_PRUSS
+	default TI_PRUSS
+	help
+	  This driver enables support for the PRU-ICSS Industrial Ethernet
+	  Peripheral within a PRU-ICSS subsystem present on various TI SoCs.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called icss_iep.
+
+endif # NET_VENDOR_TI